summaryrefslogtreecommitdiff
path: root/net/sunrpc/auth_null.c
AgeCommit message (Collapse)Author
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-08sunrpc: remove dead codes of cr_magic in rpc_credKinglong Mee
Don't found any place using the cr_magic. Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-07-19sunrpc: move NO_CRKEY_TIMEOUT to the auth->au_flagsScott Mayhew
A generic_cred can be used to look up a unx_cred or a gss_cred, so it's not really safe to use the the generic_cred->acred->ac_flags to store the NO_CRKEY_TIMEOUT flag. A lookup for a unx_cred triggered while the KEY_EXPIRE_SOON flag is already set will cause both NO_CRKEY_TIMEOUT and KEY_EXPIRE_SOON to be set in the ac_flags, leaving the user associated with the auth_cred to be in a state where they're perpetually doing 4K NFS_FILE_SYNC writes. This can be reproduced as follows: 1. Mount two NFS filesystems, one with sec=krb5 and one with sec=sys. They do not need to be the same export, nor do they even need to be from the same NFS server. Also, v3 is fine. $ sudo mount -o v3,sec=krb5 server1:/export /mnt/krb5 $ sudo mount -o v3,sec=sys server2:/export /mnt/sys 2. As the normal user, before accessing the kerberized mount, kinit with a short lifetime (but not so short that renewing the ticket would leave you within the 4-minute window again by the time the original ticket expires), e.g. $ kinit -l 10m -r 60m 3. Do some I/O to the kerberized mount and verify that the writes are wsize, UNSTABLE: $ dd if=/dev/zero of=/mnt/krb5/file bs=1M count=1 4. Wait until you're within 4 minutes of key expiry, then do some more I/O to the kerberized mount to ensure that RPC_CRED_KEY_EXPIRE_SOON gets set. Verify that the writes are 4K, FILE_SYNC: $ dd if=/dev/zero of=/mnt/krb5/file bs=1M count=1 5. Now do some I/O to the sec=sys mount. This will cause RPC_CRED_NO_CRKEY_TIMEOUT to be set: $ dd if=/dev/zero of=/mnt/sys/file bs=1M count=1 6. Writes for that user will now be permanently 4K, FILE_SYNC for that user, regardless of which mount is being written to, until you reboot the client. Renewing the kerberos ticket (assuming it hasn't already expired) will have no effect. Grabbing a new kerberos ticket at this point will have no effect either. Move the flag to the auth->au_flags field (which is currently unused) and rename it slightly to reflect that it's no longer associated with the auth_cred->ac_flags. Add the rpc_auth to the arg list of rpcauth_cred_key_to_expire and check the au_flags there too. Finally, add the inode to the arg list of nfs_ctx_key_to_expire so we can determine the rpc_auth to pass to rpcauth_cred_key_to_expire. Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-03-01nfsd: Lower NFSv4.1 callback message size limitChuck Lever
The maximum size of a backchannel message on RPC-over-RDMA depends on the connection's inline threshold. Today that threshold is typically 1024 bytes, making the maximum message size 996 bytes. The Linux server's CREATE_SESSION operation checks that the size of callback Calls can be as large as 1044 bytes, to accommodate RPCSEC_GSS. Thus CREATE_SESSION fails if a client advertises the true message size maximum of 996 bytes. But the server's backchannel currently does not support RPCSEC_GSS. The actual maximum size it needs is much smaller. It is safe to reduce the limit to enable NFSv4.1 on RDMA backchannel operation. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2014-11-24sunrpc: eliminate RPC_DEBUGJeff Layton
It's always set to whatever CONFIG_SUNRPC_DEBUG is, so just use that. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-08-03sunrpc/auth: allow lockless (rcu) lookup of credential cache.NeilBrown
The new flag RPCAUTH_LOOKUP_RCU to credential lookup avoids locking, does not take a reference on the returned credential, and returns -ECHILD if a simple lookup was not possible. The returned value can only be used within an rcu_read_lock protected region. The main user of this is the new rpc_lookup_cred_nonblock() which returns a pointer to the current credential which is only rcu-safe (no ref-count held), and might return -ECHILD if allocation was required. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2013-09-03SUNRPC refactor rpcauth_checkverf error returnsAndy Adamson
Most of the time an error from the credops crvalidate function means the server has sent us a garbage verifier. The gss_validate function is the exception where there is an -EACCES case if the user GSS_context on the client has expired. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-30SUNRPC: Replace clnt->cl_principalTrond Myklebust
The clnt->cl_principal is being used exclusively to store the service target name for RPCSEC_GSS/krb5 callbacks. Replace it with something that is stored only in the RPCSEC_GSS-specific code. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-08-04SUNRPC: Move the bound cred to struct rpc_rqstTrond Myklebust
This will allow us to save the original generic cred in rpc_message, so that if we migrate from one server to another, we can generate a new bound cred without having to punt back to the NFS layer. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2009-09-23headers: utsname.h reduxAlexey Dobriyan
* remove asm/atomic.h inclusion from linux/utsname.h -- not needed after kref conversion * remove linux/utsname.h inclusion from files which do not need it NOTE: it looks like fs/binfmt_elf.c do not need utsname.h, however due to some personality stuff it _is_ needed -- cowardly leave ELF-related headers and files alone. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-19NFSv4: Don't use cred->cr_ops->cr_name in nfs4_proc_setclientid()Trond Myklebust
With the recent change to generic creds, we can no longer use cred->cr_ops->cr_name to distinguish between RPCSEC_GSS principals and AUTH_SYS/AUTH_NULL identities. Replace it with the rpc_authops->au_name instead... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-03-14SUNRPC: Add an rpc_credop callback for binding a credential to an rpc_taskTrond Myklebust
We need the ability to treat 'generic' creds specially, since they want to bind instances of the auth cred instead of binding themselves. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: cleanup rpc credential cache garbage collectionTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Enforce atomic updates of rpc_cred->cr_flagsTrond Myklebust
Convert to the use of atomic bitops... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Mark auth and cred operation tables as constant.Trond Myklebust
Also do the same for gss_api operation tables. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Add a backpointer from the struct rpc_cred to the rpc_authTrond Myklebust
Cleans up an issue whereby rpcsec_gss uses the rpc_clnt->cl_auth. If we want to be able to add several rpc_auths to a single rpc_clnt, then this abuse must go. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-02-14[PATCH] remove many unneeded #includes of sched.hTim Schmielau
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2006-09-28[SUNRPC]: trivial endianness annotationsAlexey Dobriyan
pure s/u32/__be32/ [AV: large part based on Alexey's patches] Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-06-09NFS: Display the chosen RPCSEC_GSS security flavour in /proc/mountsTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-09-23[PATCH] RPC: Eliminate socket.h includes in RPC clientChuck Lever
Clean-up: get rid of unnecessary socket.h and in.h includes in the generic parts of the RPC client. Test-plan: Compile kernel with CONFIG_NFS enabled. Version: Thu, 11 Aug 2005 16:06:23 -0400 Signed-off-by: Chuck Lever <cel@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!