summaryrefslogtreecommitdiff
path: root/net/sunrpc/auth_unix.c
AgeCommit message (Collapse)Author
2019-04-26SUNRPC: Use the client user namespace when encoding credsTrond Myklebust
When encoding AUTH_UNIX creds and AUTH_GSS upcalls, use the user namespace of the process that created the rpc client. Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-25Merge tag 'nfs-rdma-for-5.1-1' of ↵Trond Myklebust
git://git.linux-nfs.org/projects/anna/linux-nfs NFSoRDMA client updates for 5.1 New features: - Convert rpc auth layer to use xdr_streams - Config option to disable insecure enctypes - Reduce size of RPC receive buffers Bugfixes and cleanups: - Fix sparse warnings - Check inline size before providing a write chunk - Reduce the receive doorbell rate - Various tracepoint improvements [Trond: Fix up merge conflicts] Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-02-20SUNRPC: remove pointless test in unx_match()NeilBrown
As reported by Dan Carpenter, this test for acred->cred being set is inconsistent with the dereference of the pointer a few lines earlier. An 'auth_cred' *always* has ->cred set - every place that creates one initializes this field, often as the first thing done. So remove this test. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2019-02-14SUNRPC: Add rpc_auth::au_ralign fieldChuck Lever
Currently rpc_inline_rcv_pages() uses au_rslack to estimate the size of the upper layer reply header. This is fine for auth flavors where au_verfsize == au_rslack. However, some auth flavors have more going on. krb5i for example has two more words after the verifier, and another blob following the RPC message. The calculation involving au_rslack pushes the upper layer reply header too far into the rcv_buf. au_rslack is still valuable: it's the amount of buffer space needed for the reply, and is used when allocating the reply buffer. We'll keep that. But, add a new field that can be used to properly estimate the location of the upper layer header in each RPC reply, based on the auth flavor in use. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14SUNRPC: Make AUTH_SYS and AUTH_NULL set au_verfsizeChuck Lever
au_verfsize will be needed for a non-flavor-specific computation in a subsequent patch. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-14SUNRPC: Use struct xdr_stream when decoding RPC Reply headerChuck Lever
Modernize and harden the code path that parses an RPC Reply message. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13SUNRPC: Use struct xdr_stream when constructing RPC Call headerChuck Lever
Modernize and harden the code path that constructs each RPC Call message. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-02-13SUNRPC: Remove some dprintk() call sites from auth functionsChuck Lever
Clean up: Reduce dprintk noise by removing dprintk() call sites from hot path that do not report exceptions. These are usually replaceable with function graph tracing. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-12-19SUNRPC: simplify auth_unix.NeilBrown
1/ discard 'struct unx_cred'. We don't need any data that is not already in 'struct rpc_cred'. 2/ Don't keep these creds in a hash table. When a credential is needed, simply allocate it. When not needed, discard it. This can easily be faster than performing a lookup on a shared hash table. As the lookup can happen during write-out, use a mempool to ensure forward progress. This means that we cannot compare two credentials for equality by comparing the pointers, but we never do that anyway. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-12-19SUNRPC: remove crbind rpc_cred operationNeilBrown
This now always just does get_rpccred(), so we don't need an operation pointer to know to do that. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-12-19SUNRPC: remove RPCAUTH_AUTH_NO_CRKEY_TIMEOUTNeilBrown
This is no longer used. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-12-19SUNRPC: remove uid and gid from struct auth_credNeilBrown
Use cred->fsuid and cred->fsgid instead. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-12-19SUNRPC: remove groupinfo from struct auth_cred.NeilBrown
We can use cred->groupinfo (from the 'struct cred') instead. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-12-19SUNRPC: add 'struct cred *' to auth_cred and rpc_credNeilBrown
The SUNRPC credential framework was put together before Linux has 'struct cred'. Now that we have it, it makes sense to use it. This first step just includes a suitable 'struct cred *' pointer in every 'struct auth_cred' and almost every 'struct rpc_cred'. The rpc_cred used for auth_null has a NULL 'struct cred *' as nothing else really makes sense. For rpc_cred, the pointer is reference counted. For auth_cred it isn't. struct auth_cred are either allocated on the stack, in which case the thread owns a reference to the auth, or are part of 'struct generic_cred' in which case gc_base owns the reference, and "acred" shares it. Signed-off-by: NeilBrown <neilb@suse.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2018-10-23SUNRPC: Convert the auth cred cache to use refcount_tTrond Myklebust
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
2018-07-30net/sunrpc: Make rpc_auth_create_args a constSargun Dhillon
This turns rpc_auth_create_args into a const as it gets passed through the auth stack. Signed-off-by: Sargun Dhillon <sargun@sargun.me> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-08sunrpc: rename NFS_NGROUPS to UNX_NGROUPS for auth unixKinglong Mee
NFS_NGROUPS has been move to sunrpc, rename to UNX_NGROUPS. Signed-off-by: Kinglong Mee <kinglongmee@gmail.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-10-13Merge tag 'nfs-for-4.9-1' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds
Pull NFS client updates from Anna Schumaker: "Highlights include: Stable bugfixes: - sunrpc: fix writ espace race causing stalls - NFS: Fix inode corruption in nfs_prime_dcache() - NFSv4: Don't report revoked delegations as valid in nfs_have_delegation() - NFSv4: nfs4_copy_delegation_stateid() must fail if the delegation is invalid - NFSv4: Open state recovery must account for file permission changes - NFSv4.2: Fix a reference leak in nfs42_proc_layoutstats_generic Features: - Add support for tracking multiple layout types with an ordered list - Add support for using multiple backchannel threads on the client - Add support for pNFS file layout session trunking - Delay xprtrdma use of DMA API (for device driver removal) - Add support for xprtrdma remote invalidation - Add support for larger xprtrdma inline thresholds - Use a scatter/gather list for sending xprtrdma RPC calls - Add support for the CB_NOTIFY_LOCK callback - Improve hashing sunrpc auth_creds by using both uid and gid Bugfixes: - Fix xprtrdma use of DMA API - Validate filenames before adding to the dcache - Fix corruption of xdr->nwords in xdr_copy_to_scratch - Fix setting buffer length in xdr_set_next_buffer() - Don't deadlock the state manager on the SEQUENCE status flags - Various delegation and stateid related fixes - Retry operations if an interrupted slot receives EREMOTEIO - Make nfs boot time y2038 safe" * tag 'nfs-for-4.9-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (100 commits) NFSv4.2: Fix a reference leak in nfs42_proc_layoutstats_generic fs: nfs: Make nfs boot time y2038 safe sunrpc: replace generic auth_cred hash with auth-specific function sunrpc: add RPCSEC_GSS hash_cred() function sunrpc: add auth_unix hash_cred() function sunrpc: add generic_auth hash_cred() function sunrpc: add hash_cred() function to rpc_authops struct Retry operation on EREMOTEIO on an interrupted slot pNFS: Fix atime updates on pNFS clients sunrpc: queue work on system_power_efficient_wq NFSv4.1: Even if the stateid is OK, we may need to recover the open modes NFSv4: If recovery failed for a specific open stateid, then don't retry NFSv4: Fix retry issues with nfs41_test/free_stateid NFSv4: Open state recovery must account for file permission changes NFSv4: Mark the lock and open stateids as invalid after freeing them NFSv4: Don't test open_stateid unless it is set NFSv4: nfs4_do_handle_exception() handle revoke/expiry of a single stateid NFS: Always call nfs_inode_find_state_and_recover() when revoking a delegation NFSv4: Fix a race when updating an open_stateid NFSv4: Fix a race in nfs_inode_reclaim_delegation() ...
2016-10-07cred: simpler, 1D supplementary groupsAlexey Dobriyan
Current supplementary groups code can massively overallocate memory and is implemented in a way so that access to individual gid is done via 2D array. If number of gids is <= 32, memory allocation is more or less tolerable (140/148 bytes). But if it is not, code allocates full page (!) regardless and, what's even more fun, doesn't reuse small 32-entry array. 2D array means dependent shifts, loads and LEAs without possibility to optimize them (gid is never known at compile time). All of the above is unnecessary. Switch to the usual trailing-zero-len-array scheme. Memory is allocated with kmalloc/vmalloc() and only as much as needed. Accesses become simpler (LEA 8(gi,idx,4) or even without displacement). Maximum number of gids is 65536 which translates to 256KB+8 bytes. I think kernel can handle such allocation. On my usual desktop system with whole 9 (nine) aux groups, struct group_info shrinks from 148 bytes to 44 bytes, yay! Nice side effects: - "gi->gid[i]" is shorter than "GROUP_AT(gi, i)", less typing, - fix little mess in net/ipv4/ping.c should have been using GROUP_AT macro but this point becomes moot, - aux group allocation is persistent and should be accounted as such. Link: http://lkml.kernel.org/r/20160817201927.GA2096@p183.telecom.by Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: Vasily Kulikov <segoon@openwall.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-09-30sunrpc: add auth_unix hash_cred() functionFrank Sorenson
Add a hash_cred() function for auth_unix, using both the uid and gid from the auth_cred. Signed-off-by: Frank Sorenson <sorenson@redhat.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-07-19sunrpc: move NO_CRKEY_TIMEOUT to the auth->au_flagsScott Mayhew
A generic_cred can be used to look up a unx_cred or a gss_cred, so it's not really safe to use the the generic_cred->acred->ac_flags to store the NO_CRKEY_TIMEOUT flag. A lookup for a unx_cred triggered while the KEY_EXPIRE_SOON flag is already set will cause both NO_CRKEY_TIMEOUT and KEY_EXPIRE_SOON to be set in the ac_flags, leaving the user associated with the auth_cred to be in a state where they're perpetually doing 4K NFS_FILE_SYNC writes. This can be reproduced as follows: 1. Mount two NFS filesystems, one with sec=krb5 and one with sec=sys. They do not need to be the same export, nor do they even need to be from the same NFS server. Also, v3 is fine. $ sudo mount -o v3,sec=krb5 server1:/export /mnt/krb5 $ sudo mount -o v3,sec=sys server2:/export /mnt/sys 2. As the normal user, before accessing the kerberized mount, kinit with a short lifetime (but not so short that renewing the ticket would leave you within the 4-minute window again by the time the original ticket expires), e.g. $ kinit -l 10m -r 60m 3. Do some I/O to the kerberized mount and verify that the writes are wsize, UNSTABLE: $ dd if=/dev/zero of=/mnt/krb5/file bs=1M count=1 4. Wait until you're within 4 minutes of key expiry, then do some more I/O to the kerberized mount to ensure that RPC_CRED_KEY_EXPIRE_SOON gets set. Verify that the writes are 4K, FILE_SYNC: $ dd if=/dev/zero of=/mnt/krb5/file bs=1M count=1 5. Now do some I/O to the sec=sys mount. This will cause RPC_CRED_NO_CRKEY_TIMEOUT to be set: $ dd if=/dev/zero of=/mnt/sys/file bs=1M count=1 6. Writes for that user will now be permanently 4K, FILE_SYNC for that user, regardless of which mount is being written to, until you reboot the client. Renewing the kerberos ticket (assuming it hasn't already expired) will have no effect. Grabbing a new kerberos ticket at this point will have no effect either. Move the flag to the auth->au_flags field (which is currently unused) and rename it slightly to reflect that it's no longer associated with the auth_cred->ac_flags. Add the rpc_auth to the arg list of rpcauth_cred_key_to_expire and check the au_flags there too. Finally, add the inode to the arg list of nfs_ctx_key_to_expire so we can determine the rpc_auth to pass to rpcauth_cred_key_to_expire. Signed-off-by: Scott Mayhew <smayhew@redhat.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2016-05-09sunrpc: plumb gfp_t parm into crcreate operationJeff Layton
We need to be able to call the generic_cred creator from different contexts. Add a gfp_t parm to the crcreate operation and to rpcauth_lookup_credcache. For now, we just push the gfp_t parms up one level to the *_lookup_cred functions. Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2016-03-01nfsd: Lower NFSv4.1 callback message size limitChuck Lever
The maximum size of a backchannel message on RPC-over-RDMA depends on the connection's inline threshold. Today that threshold is typically 1024 bytes, making the maximum message size 996 bytes. The Linux server's CREATE_SESSION operation checks that the size of callback Calls can be as large as 1044 bytes, to accommodate RPCSEC_GSS. Thus CREATE_SESSION fails if a client advertises the true message size maximum of 996 bytes. But the server's backchannel currently does not support RPCSEC_GSS. The actual maximum size it needs is much smaller. It is safe to reduce the limit to enable NFSv4.1 on RDMA backchannel operation. Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2015-08-12sunrpc: increase UNX_MAXNODENAME from 32 to __NEW_UTS_LEN bytesJeff Layton
The current limit of 32 bytes artificially limits the name string that we end up stuffing into NFSv4.x client ID blobs. If you have multiple hosts with long hostnames that only differ near the end, then this can cause NFSv4 client ID collisions. Linux nodenames are actually limited to __NEW_UTS_LEN bytes (64), so use that as the limit instead. Also, use XDR_QUADLEN to specify the slack length, just for clarity and in case someone in the future changes this to something not evenly divisible by 4. Reported-by: Michael Skralivetsky <michael.skralivetsky@primarydata.com> Signed-off-by: Jeff Layton <jeff.layton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2014-11-24sunrpc: eliminate RPC_DEBUGJeff Layton
It's always set to whatever CONFIG_SUNRPC_DEBUG is, so just use that. Signed-off-by: Jeff Layton <jlayton@primarydata.com> Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2013-09-03SUNRPC refactor rpcauth_checkverf error returnsAndy Adamson
Most of the time an error from the credops crvalidate function means the server has sent us a garbage verifier. The gss_validate function is the exception where there is an -EACCES case if the user GSS_context on the client has expired. Signed-off-by: Andy Adamson <andros@netapp.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-08-30SUNRPC: Replace clnt->cl_principalTrond Myklebust
The clnt->cl_principal is being used exclusively to store the service target name for RPCSEC_GSS/krb5 callbacks. Replace it with something that is stored only in the RPCSEC_GSS-specific code. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2013-02-13sunrpc: Properly encode kuids and kgids in RPC_AUTH_UNIX credentialsEric W. Biederman
When writing kuids onto the wire first map them into the initial user namespace. When writing kgids onto the wire first map them into the initial user namespace. Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13sunrpc: Use gid_valid to test for gid != INVALID_GIDEric W. Biederman
In auth unix there are a couple of places INVALID_GID is used a sentinel to mark the end of uc_gids array. Use gid_valid as a type safe way to verify we have not hit the end of valid data in the array. Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13sunrpc: Convert kuids and kgids to uids and gids for printingEric W. Biederman
When printing kuids and kgids for debugging purpropses convert them to ordinary integers so their values can be fed to the oridnary print functions. Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13sunrpc: Simplify auth_unix now that everything is a kgid_tEric W. Biederman
In unx_create_cred directly assign gids from acred->group_info to cred->uc_gids. In unx_match directly compare uc_gids with group_info. Now that both group_info and unx_cred gids are stored as kgids this is valid and the extra layer of translation can be removed. Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13sunrpc: Use uid_eq and gid_eq where appropriateEric W. Biederman
When comparing uids use uid_eq instead of ==. When comparing gids use gid_eq instead of ==. And unfortunate cost of type safety. Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13sunrpc: Use kuid_t and kgid_t where appropriateEric W. Biederman
Convert variables that store uids and gids to be of type kuid_t and kgid_t instead of type uid_t and gid_t. Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13sunrpc: Use userns friendly constants.Eric W. Biederman
Instead of (uid_t)0 use GLOBAL_ROOT_UID. Instead of (gid_t)0 use GLOBAL_ROOT_GID. Instead of (uid_t)-1 use INVALID_UID Instead of (gid_t)-1 use INVALID_GID. Instead of NOGROUP use INVALID_GID. Cc: "J. Bruce Fields" <bfields@fieldses.org> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2012-05-03userns: Convert group_info values from gid_t to kgid_t.Eric W. Biederman
As a first step to converting struct cred to be all kuid_t and kgid_t values convert the group values stored in group_info to always be kgid_t values. Unless user namespaces are used this change should have no effect. Acked-by: Serge Hallyn <serge.hallyn@canonical.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2011-10-25NFS/sunrpc: don't use a credential with extra groups.NeilBrown
The sunrpc layer keeps a cache of recently used credentials and 'unx_match' is used to find the credential which matches the current process. However unx_match allows a match when the cached credential has extra groups at the end of uc_gids list which are not in the process group list. So if a process with a list of (say) 4 group accesses a file and gains access because of the last group in the list, then another process with the same uid and gid, and a gid list being the first tree of the gids of the original process tries to access the file, it will be granted access even though it shouldn't as the wrong rpc credential will be used. Signed-off-by: NeilBrown <neilb@suse.de> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: stable@vger.kernel.org
2010-08-04SUNRPC: Move the bound cred to struct rpc_rqstTrond Myklebust
This will allow us to save the original generic cred in rpc_message, so that if we migrate from one server to another, we can generate a new bound cred without having to punt back to the NFS layer. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-08-04NFS: Ensure the AUTH_UNIX credcache is allocated dynamicallyTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2008-07-09SUNRPC: Use GFP_NOFS when allocating credentialsTrond Myklebust
Since the credentials may be allocated during the call to rpc_new_task(), which again may be called by a memory allocator... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-04-19NFSv4: Don't use cred->cr_ops->cr_name in nfs4_proc_setclientid()Trond Myklebust
With the recent change to generic creds, we can no longer use cred->cr_ops->cr_name to distinguish between RPCSEC_GSS principals and AUTH_SYS/AUTH_NULL identities. Replace it with the rpc_authops->au_name instead... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-03-14SUNRPC: Add an rpc_credop callback for binding a credential to an rpc_taskTrond Myklebust
We need the ability to treat 'generic' creds specially, since they want to bind instances of the auth cred instead of binding themselves. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2008-03-14SUNRPC: Fix RPCAUTH_LOOKUP_ROOTCREDSTrond Myklebust
The current RPCAUTH_LOOKUP_ROOTCREDS flag only works for AUTH_SYS authentication, and then only as a special case in the code. This patch removes the auth_sys special casing, and replaces it with generic code. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Remove the tk_auth macro...Trond Myklebust
We should almost always be deferencing the rpc_auth struct by means of the credential's cr_auth field instead of the rpc_clnt->cl_auth anyway. Fix up that historical mistake, and remove the macro that propagated it. Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Convert the credential garbage collector into a shrinker callbackTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Give credential cache a local spinlockTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Convert the credcache lookup code to use RCUTrond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: Enforce atomic updates of rpc_cred->cr_flagsTrond Myklebust
Convert to the use of atomic bitops... Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
2007-07-10SUNRPC: replace casts in auth_unix.c with container_of()Trond Myklebust
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>