summaryrefslogtreecommitdiff
path: root/net/tipc
AgeCommit message (Collapse)Author
2015-04-29tipc: fix problem with parallel link synchronization mechanismJon Paul Maloy
Currently, we try to accumulate arrived packets in the links's 'deferred' queue during the parallel link syncronization phase. This entails two problems: - With an unlucky combination of arriving packets the algorithm may go into a lockstep with the out-of-sequence handling function, where the synch mechanism is adding a packet to the deferred queue, while the out-of-sequence handling is retrieving it again, thus ending up in a loop inside the node_lock scope. - Even if this is avoided, the link will very often send out unnecessary protocol messages, in the worst case leading to redundant retransmissions. We fix this by just dropping arriving packets on the upcoming link during the synchronization phase, thus relying on the retransmission protocol to resolve the situation once the two links have arrived to a synchronized state. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-29tipc: remove wrong use of NLM_F_MULTINicolas Dichtel
NLM_F_MULTI must be used only when a NLMSG_DONE message is sent. In fact, it is sent only at the end of a dump. Libraries like libnl will wait forever for NLMSG_DONE. Fixes: 35b9dd7607f0 ("tipc: add bearer get/dump to new netlink api") Fixes: 7be57fc69184 ("tipc: add link get/dump to new netlink api") Fixes: 46f15c6794fb ("tipc: add media get/dump to new netlink api") CC: Richard Alpe <richard.alpe@ericsson.com> CC: Jon Maloy <jon.maloy@ericsson.com> CC: Ying Xue <ying.xue@windriver.com> CC: tipc-discussion@lists.sourceforge.net Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-23tipc: fix node refcount issueErik Hugne
When link statistics is dumped over netlink, we iterate over the list of peer nodes and append each links statistics to the netlink msg. In the case where the dump is resumed after filling up a nlmsg, the node refcnt is decremented without having been incremented previously which may cause the node reference to be freed. When this happens, the following info/stacktrace will be generated, followed by a crash or undefined behavior. We fix this by removing the erroneous call to tipc_node_put inside the loop that iterates over nodes. [ 384.312303] INFO: trying to register non-static key. [ 384.313110] the code is fine but needs lockdep annotation. [ 384.313290] turning off the locking correctness validator. [ 384.313290] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.0.0+ #13 [ 384.313290] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 384.313290] ffff88003c6d0290 ffff88003cc03ca8 ffffffff8170adf1 0000000000000007 [ 384.313290] ffffffff82728730 ffff88003cc03d38 ffffffff810a6a6d 00000000001d7200 [ 384.313290] ffff88003c6d0ab0 ffff88003cc03ce8 0000000000000285 0000000000000001 [ 384.313290] Call Trace: [ 384.313290] <IRQ> [<ffffffff8170adf1>] dump_stack+0x4c/0x65 [ 384.313290] [<ffffffff810a6a6d>] __lock_acquire+0xf3d/0xf50 [ 384.313290] [<ffffffff810a7375>] lock_acquire+0xd5/0x290 [ 384.313290] [<ffffffffa0043e8c>] ? link_timeout+0x1c/0x170 [tipc] [ 384.313290] [<ffffffffa0043e70>] ? link_state_event+0x4e0/0x4e0 [tipc] [ 384.313290] [<ffffffff81712890>] _raw_spin_lock_bh+0x40/0x80 [ 384.313290] [<ffffffffa0043e8c>] ? link_timeout+0x1c/0x170 [tipc] [ 384.313290] [<ffffffffa0043e8c>] link_timeout+0x1c/0x170 [tipc] [ 384.313290] [<ffffffff810c4698>] call_timer_fn+0xb8/0x490 [ 384.313290] [<ffffffff810c45e0>] ? process_timeout+0x10/0x10 [ 384.313290] [<ffffffff810c5a2c>] run_timer_softirq+0x21c/0x420 [ 384.313290] [<ffffffffa0043e70>] ? link_state_event+0x4e0/0x4e0 [tipc] [ 384.313290] [<ffffffff8105a954>] __do_softirq+0xf4/0x630 [ 384.313290] [<ffffffff8105afdd>] irq_exit+0x5d/0x60 [ 384.313290] [<ffffffff8103ade1>] smp_apic_timer_interrupt+0x41/0x50 [ 384.313290] [<ffffffff817144a0>] apic_timer_interrupt+0x70/0x80 [ 384.313290] <EOI> [<ffffffff8100db10>] ? default_idle+0x20/0x210 [ 384.313290] [<ffffffff8100db0e>] ? default_idle+0x1e/0x210 [ 384.313290] [<ffffffff8100e61a>] arch_cpu_idle+0xa/0x10 [ 384.313290] [<ffffffff81099803>] cpu_startup_entry+0x2c3/0x530 [ 384.313290] [<ffffffff810d2893>] ? clockevents_register_device+0x113/0x200 [ 384.313290] [<ffffffff81038b0f>] start_secondary+0x13f/0x170 Fixes: 8a0f6ebe8494 ("tipc: involve reference counter for node structure") Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-23tipc: fix random link reset problemErik Hugne
In the function tipc_sk_rcv(), the stack variable 'err' is only initialized to TIPC_ERR_NO_PORT for the first iteration over the link input queue. If a chain of messages are received from a link, failure to lookup the socket for any but the first message will cause the message to bounce back out on a random link. We fix this by properly initializing err. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-23tipc: fix topology server broken issueYing Xue
When a new topology server is launched in a new namespace, its listening socket is inserted into the "init ns" namespace's socket hash table rather than the one owned by the new namespace. Although the socket's namespace is forcedly changed to the new namespace later, the socket is still stored in the socket hash table of "init ns" namespace. When a client created in the new namespace connects its own topology server, the connection is failed as its server's socket could not be found from its own namespace's socket table. If __sock_create() instead of original sock_create_kern() is used to create the server's socket through specifying an expected namesapce, the socket will be inserted into the specified namespace's socket table, thereby avoiding to the topology server broken issue. Fixes: 76100a8a64bc ("tipc: fix netns refcnt leak") Reported-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-07udp_tunnel: Pass UDP socket down through udp_tunnel{, 6}_xmit_skb().David Miller
That was we can make sure the output path of ipv4/ipv6 operate on the UDP socket rather than whatever random thing happens to be in skb->sk. Based upon a patch by Jiri Pirko. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
2015-04-02tipc: simplify link mtu negotiationJon Paul Maloy
When a link is being established, the two endpoints advertise their respective interface MTU in the transmitted RESET and ACTIVATE messages. If there is any difference, the lower of the two MTUs will be selected for use by both endpoints. However, as a remnant of earlier attempts to introduce TIPC level routing. there also exists an MTU discovery mechanism. If an intermediate node has a lower MTU than the two endpoints, they will discover this through a bisectional approach, and finally adopt this MTU for common use. Since there is no TIPC level routing, and probably never will be, this mechanism doesn't make any sense, and only serves to make the link level protocol unecessarily complex. In this commit, we eliminate the MTU discovery algorithm,and fall back to the simple MTU advertising approach. This change is fully backwards compatible. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02tipc: eliminate delayed link deletion at link failoverJon Paul Maloy
When a bearer is disabled manually, all its links have to be reset and deleted. However, if there is a remaining, parallel link ready to take over a deleted link's traffic, we currently delay the delete of the removed link until the failover procedure is finished. This is because the remaining link needs to access state from the reset link, such as the last received packet number, and any partially reassembled buffer, in order to perform a successful failover. In this commit, we do instead move the state data over to the new link, so that it can fulfill the procedure autonomously, without accessing any data on the old link. This means that we can now proceed and delete all pertaining links immediately when a bearer is disabled. This saves us from some unnecessary complexity in such situations. We also choose to change the confusing definitions CHANGEOVER_PROTOCOL, ORIGINAL_MSG and DUPLICATE_MSG to the more descriptive TUNNEL_PROTOCOL, FAILOVER_MSG and SYNCH_MSG respectively. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02tipc: drop tunneled packet duplicates at receptionJon Paul Maloy
In commit 8b4ed8634f8b3f9aacfc42b4a872d30c36b9e255 ("tipc: eliminate race condition at dual link establishment") we introduced a parallel link synchronization mechanism that guarentees sequential delivery even for users switching from an old to a newly established link. The new mechanism makes it unnecessary to deliver the tunneled duplicate packets back to the old link, as we are currently doing. It is now sufficient to use the last tunneled packet's inner sequence number as synchronization point between the two parallel links, whereafter it can be dropped. In this commit, we drop the duplicate packets arriving on the new link, after updating the synchronization point at each new arrival. Although it would now have been sufficient for the other endpoint to only tunnel the last packet in its send queue, and not the entire queue, we must still do this to maintain compatibility with older nodes. This commit makes it possible to get rid if some complex interaction between the two parallel links. Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/usb/asix_common.c drivers/net/usb/sr9800.c drivers/net/usb/usbnet.c include/linux/usb/usbnet.h net/ipv4/tcp_ipv4.c net/ipv6/tcp_ipv6.c The TCP conflicts were overlapping changes. In 'net' we added a READ_ONCE() to the socket cached RX route read, whilst in 'net-next' Eric Dumazet touched the surrounding code dealing with how mini sockets are handled. With USB, it's a case of the same bug fix first going into net-next and then I cherry picked it back into net. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31tipc: fix a slab object leakYing Xue
When remove TIPC module, there is a warning to remind us that a slab object is leaked like: root@localhost:~# rmmod tipc [ 19.056226] ============================================================================= [ 19.057549] BUG TIPC (Not tainted): Objects remaining in TIPC on kmem_cache_close() [ 19.058736] ----------------------------------------------------------------------------- [ 19.058736] [ 19.060287] INFO: Slab 0xffffea0000519a00 objects=23 used=1 fp=0xffff880014668b00 flags=0x100000000004080 [ 19.061915] INFO: Object 0xffff880014668000 @offset=0 [ 19.062717] kmem_cache_destroy TIPC: Slab cache still has objects This is because the listening socket of TIPC topology server is not closed before TIPC proto handler is unregistered with proto_unregister(). However, as the socket is closed in tipc_exit_net() which is called by unregister_pernet_subsys() during unregistering TIPC namespace operation, the warning can be eliminated if calling unregister_pernet_subsys() is moved before calling proto_unregister(). Fixes: e05b31f4bf89 ("tipc: make tipc socket support net namespace") Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29tipc: fix two bugs in secondary destination lookupJon Paul Maloy
A message sent to a node after a successful name table lookup may still find that the destination socket has disappeared, because distribution of name table updates is non-atomic. If so, the message will be rejected back to the sender with error code TIPC_ERR_NO_PORT. If the source socket of the message has disappeared in the meantime, the message should be dropped. However, in the currrent code, the message will instead be subject to an unwanted tertiary lookup, because the function tipc_msg_lookup_dest() doesn't check if there is an error code present in the message before performing the lookup. In the worst case, the message may now find the old destination again, and be redirected once more, instead of being dropped directly as it should be. A second bug in this function is that the "prev_node" field in the message is not updated after successful lookup, something that may have unpredictable consequences. The problems arising from those bugs occur very infrequently. The third change in this function; the test on msg_reroute_msg_cnt() is purely cosmetic, reflecting that the returned value never can be negative. This commit corrects the two bugs described above. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29tipc: involve reference counter for node structureYing Xue
TIPC node hash node table is protected with rcu lock on read side. tipc_node_find() is used to look for a node object with node address through iterating the hash node table. As the entire process of what tipc_node_find() traverses the table is guarded with rcu read lock, it's safe for us. However, when callers use the node object returned by tipc_node_find(), there is no rcu read lock applied. Therefore, this is absolutely unsafe for callers of tipc_node_find(). Now we introduce a reference counter for node structure. Before tipc_node_find() returns node object to its caller, it first increases the reference counter. Accordingly, after its caller used it up, it decreases the counter again. This can prevent a node being used by one thread from being freed by another thread. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-29tipc: fix potential deadlock when all links are resetYing Xue
[ 60.988363] ====================================================== [ 60.988754] [ INFO: possible circular locking dependency detected ] [ 60.989152] 3.19.0+ #194 Not tainted [ 60.989377] ------------------------------------------------------- [ 60.989781] swapper/3/0 is trying to acquire lock: [ 60.990079] (&(&n_ptr->lock)->rlock){+.-...}, at: [<ffffffffa0006dca>] tipc_link_retransmit+0x1aa/0x240 [tipc] [ 60.990743] [ 60.990743] but task is already holding lock: [ 60.991106] (&(&bclink->lock)->rlock){+.-...}, at: [<ffffffffa00004be>] tipc_bclink_lock+0x8e/0xa0 [tipc] [ 60.991738] [ 60.991738] which lock already depends on the new lock. [ 60.991738] [ 60.992174] [ 60.992174] the existing dependency chain (in reverse order) is: [ 60.992174] -> #1 (&(&bclink->lock)->rlock){+.-...}: [ 60.992174] [<ffffffff810a9c0c>] lock_acquire+0x9c/0x140 [ 60.992174] [<ffffffff8179c41f>] _raw_spin_lock_bh+0x3f/0x50 [ 60.992174] [<ffffffffa00004be>] tipc_bclink_lock+0x8e/0xa0 [tipc] [ 60.992174] [<ffffffffa0000f57>] tipc_bclink_add_node+0x97/0xf0 [tipc] [ 60.992174] [<ffffffffa0011815>] tipc_node_link_up+0xf5/0x110 [tipc] [ 60.992174] [<ffffffffa0007783>] link_state_event+0x2b3/0x4f0 [tipc] [ 60.992174] [<ffffffffa00193c0>] tipc_link_proto_rcv+0x24c/0x418 [tipc] [ 60.992174] [<ffffffffa0008857>] tipc_rcv+0x827/0xac0 [tipc] [ 60.992174] [<ffffffffa0002ca3>] tipc_l2_rcv_msg+0x73/0xd0 [tipc] [ 60.992174] [<ffffffff81646e66>] __netif_receive_skb_core+0x746/0x980 [ 60.992174] [<ffffffff816470c1>] __netif_receive_skb+0x21/0x70 [ 60.992174] [<ffffffff81647295>] netif_receive_skb_internal+0x35/0x130 [ 60.992174] [<ffffffff81648218>] napi_gro_receive+0x158/0x1d0 [ 60.992174] [<ffffffff81559e05>] e1000_clean_rx_irq+0x155/0x490 [ 60.992174] [<ffffffff8155c1b7>] e1000_clean+0x267/0x990 [ 60.992174] [<ffffffff81647b60>] net_rx_action+0x150/0x360 [ 60.992174] [<ffffffff8105ec43>] __do_softirq+0x123/0x360 [ 60.992174] [<ffffffff8105f12e>] irq_exit+0x8e/0xb0 [ 60.992174] [<ffffffff8179f9f5>] do_IRQ+0x65/0x110 [ 60.992174] [<ffffffff8179da6f>] ret_from_intr+0x0/0x13 [ 60.992174] [<ffffffff8100de9f>] arch_cpu_idle+0xf/0x20 [ 60.992174] [<ffffffff8109dfa6>] cpu_startup_entry+0x2f6/0x3f0 [ 60.992174] [<ffffffff81033cda>] start_secondary+0x13a/0x150 [ 60.992174] -> #0 (&(&n_ptr->lock)->rlock){+.-...}: [ 60.992174] [<ffffffff810a8f7d>] __lock_acquire+0x163d/0x1ca0 [ 60.992174] [<ffffffff810a9c0c>] lock_acquire+0x9c/0x140 [ 60.992174] [<ffffffff8179c41f>] _raw_spin_lock_bh+0x3f/0x50 [ 60.992174] [<ffffffffa0006dca>] tipc_link_retransmit+0x1aa/0x240 [tipc] [ 60.992174] [<ffffffffa0001e11>] tipc_bclink_rcv+0x611/0x640 [tipc] [ 60.992174] [<ffffffffa0008646>] tipc_rcv+0x616/0xac0 [tipc] [ 60.992174] [<ffffffffa0002ca3>] tipc_l2_rcv_msg+0x73/0xd0 [tipc] [ 60.992174] [<ffffffff81646e66>] __netif_receive_skb_core+0x746/0x980 [ 60.992174] [<ffffffff816470c1>] __netif_receive_skb+0x21/0x70 [ 60.992174] [<ffffffff81647295>] netif_receive_skb_internal+0x35/0x130 [ 60.992174] [<ffffffff81648218>] napi_gro_receive+0x158/0x1d0 [ 60.992174] [<ffffffff81559e05>] e1000_clean_rx_irq+0x155/0x490 [ 60.992174] [<ffffffff8155c1b7>] e1000_clean+0x267/0x990 [ 60.992174] [<ffffffff81647b60>] net_rx_action+0x150/0x360 [ 60.992174] [<ffffffff8105ec43>] __do_softirq+0x123/0x360 [ 60.992174] [<ffffffff8105f12e>] irq_exit+0x8e/0xb0 [ 60.992174] [<ffffffff8179f9f5>] do_IRQ+0x65/0x110 [ 60.992174] [<ffffffff8179da6f>] ret_from_intr+0x0/0x13 [ 60.992174] [<ffffffff8100de9f>] arch_cpu_idle+0xf/0x20 [ 60.992174] [<ffffffff8109dfa6>] cpu_startup_entry+0x2f6/0x3f0 [ 60.992174] [<ffffffff81033cda>] start_secondary+0x13a/0x150 [ 60.992174] [ 60.992174] other info that might help us debug this: [ 60.992174] [ 60.992174] Possible unsafe locking scenario: [ 60.992174] [ 60.992174] CPU0 CPU1 [ 60.992174] ---- ---- [ 60.992174] lock(&(&bclink->lock)->rlock); [ 60.992174] lock(&(&n_ptr->lock)->rlock); [ 60.992174] lock(&(&bclink->lock)->rlock); [ 60.992174] lock(&(&n_ptr->lock)->rlock); [ 60.992174] [ 60.992174] *** DEADLOCK *** [ 60.992174] [ 60.992174] 3 locks held by swapper/3/0: [ 60.992174] #0: (rcu_read_lock){......}, at: [<ffffffff81646791>] __netif_receive_skb_core+0x71/0x980 [ 60.992174] #1: (rcu_read_lock){......}, at: [<ffffffffa0002c35>] tipc_l2_rcv_msg+0x5/0xd0 [tipc] [ 60.992174] #2: (&(&bclink->lock)->rlock){+.-...}, at: [<ffffffffa00004be>] tipc_bclink_lock+0x8e/0xa0 [tipc] [ 60.992174] The correct the sequence of grabbing n_ptr->lock and bclink->lock should be that the former is first held and the latter is then taken, which exactly happened on CPU1. But especially when the retransmission of broadcast link is failed, bclink->lock is first held in tipc_bclink_rcv(), and n_ptr->lock is taken in link_retransmit_failure() called by tipc_link_retransmit() subsequently, which is demonstrated on CPU0. As a result, deadlock occurs. If the order of holding the two locks happening on CPU0 is reversed, the deadlock risk will be relieved. Therefore, the node lock taken in link_retransmit_failure() originally is moved to tipc_bclink_rcv() so that it's obtained before bclink lock. But the precondition of the adjustment of node lock is that responding to bclink reset event must be moved from tipc_bclink_unlock() to tipc_node_unlock(). Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-25tipc: eliminate race condition at dual link establishmentJon Paul Maloy
Despite recent improvements, the establishment of dual parallel links still has a small glitch where messages can bypass each other. When the second link in a dual-link configuration is established, part of the first link's traffic will be steered over to the new link. Although we do have a mechanism to ensure that packets sent before and after the establishment of the new link arrive in sequence to the destination node, this is not enough. The arriving messages will still be delivered upwards in different threads, something entailing a risk of message disordering during the transition phase. To fix this, we introduce a synchronization mechanism between the two parallel links, so that traffic arriving on the new link cannot be added to its input queue until we are guaranteed that all pre-establishment messages have been delivered on the old, parallel link. This problem seems to always have been around, but its occurrence is so rare that it has not been noticed until recent intensive testing. Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-25tipc: clean up handling of link congestionJon Paul Maloy
After the recent changes in message importance handling it becomes possible to simplify handling of messages and sockets when we encounter link congestion. We merge the function tipc_link_cong() into link_schedule_user(), and simplify the code of the latter. The code should now be easier to follow, especially regarding return codes and handling of the message that caused the situation. In case the scheduling function is unable to pre-allocate a wakeup message buffer, it now returns -ENOBUFS, which is a more correct code than the previously used -EHOSTUNREACH. Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-25tipc: introduce starvation free send algorithmJon Paul Maloy
Currently, we only use a single counter; the length of the backlog queue, to determine whether a message should be accepted to the queue or not. Each time a message is being sent, the queue length is compared to a threshold value for the message's importance priority. If the queue length is beyond this threshold, the message is rejected. This algorithm implies a risk of starvation of low importance senders during very high load, because it may take a long time before the backlog queue has decreased enough to accept a lower level message. We now eliminate this risk by introducing a counter for each importance priority. When a message is sent, we check only the queue level for that particular message's priority. If that is ok, the message can be added to the backlog, irrespective of the queue level for other priorities. This way, each level is guaranteed a certain portion of the total bandwidth, and any risk of starvation is eliminated. Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-25tipc: fix a link reset issue due to retransmission failuresYing Xue
When a node joins a cluster while we are transmitting a fragment stream over the broadcast link, it's missing the preceding fragments needed to build a meaningful message. As a result, the node has to drop it. However, as the fragment message is not acknowledged to its sender before it's dropped, it accidentally causes link reset of retransmission failure on the node. Reported-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Tested-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-24rhashtable: Disable automatic shrinking by defaultThomas Graf
Introduce a new bool automatic_shrinking to require the user to explicitly opt-in to automatic shrinking of tables. Signed-off-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-24tipc: fix compile error when IPV6=m and TIPC=yYing Xue
When IPV6=m and TIPC=y, below error will appear during building kernel image: net/tipc/udp_media.c:196: undefined reference to `ip6_dst_lookup' make: *** [vmlinux] Error 1 As ip6_dst_lookup() is implemented in IPV6 and IPV6 is compiled as module, ip6_dst_lookup() is not built-in core kernel image. As a result, compiler cannot find 'ip6_dst_lookup' reference while compiling TIPC code into core kernel image. But with the method introduced by commit 5f81bd2e5d80 ("ipv6: export a stub for IPv6 symbols used by vxlan"), we can avoid the compile error through "ipv6_stub" pointer to access ip6_dst_lookup(). Fixes: d0f91938bede ("tipc: add ip/udp media type") Suggested-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-24tipc: validate length of sockaddr in connect() for dgram/rdmSasha Levin
Commit f2f8036 ("tipc: add support for connect() on dgram/rdm sockets") hasn't validated user input length for the sockaddr structure which allows a user to overwrite kernel memory with arbitrary input. Fixes: f2f8036 ("tipc: add support for connect() on dgram/rdm sockets") Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-23tipc: Use default rhashtable hashfnHerbert Xu
This patch removes the explicit jhash value for the hashfn parameter of rhashtable. The default is now jhash so removing the setting makes no difference apart from making one less copy of jhash in the kernel. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Acked-by: Thomas Graf <tgraf@suug.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20tipc: Use inlined rhashtable interfaceHerbert Xu
This patch converts tipc to the inlined rhashtable interface. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-19tipc: fix build issue when building without IPv6Marcelo Ricardo Leitner
We can't directly call ipv6_sock_mc_join() but should use the stub instead and protect it around IS_ENABLED. Fixes: d0f91938bede ("tipc: add ip/udp media type") Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-19tipc: add support for connect() on dgram/rdm socketsErik Hugne
Following the example of ip4_datagram_connect, we store the address in the socket structure for dgram/rdm sockets and use that as the default destination for subsequent send() calls. It is allowed to connect to any address types, and the behaviour of send() will be the same as a normal sendto() with this address provided. Binding to an AF_UNSPEC address clears the association. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-19tipc: do not report -EHOSTUNREACH for failed local deliveryErik Hugne
Since commit 1186adf7df04 ("tipc: simplify message forwarding and rejection in socket layer") -EHOSTUNREACH is propagated back to the sending process if we fail to deliver the message to another socket local to the node. This is wrong, host unreachable should only be reported when the destination port/name does not exist in the cluster, and that check is always done before sending the message. Also, this introduces inconsistent sendmsg() behavior for local/remote destinations. Errors occurring on the receiving side should not trickle up to the sender. If message delivery fails TIPC should either discard the packet or reject it back to the sender based on the destination droppable option. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-19tipc: remove redundant call to tipc_node_remove_connErik Hugne
tipc_node_remove_conn may be called twice if shutdown() is called on a socket that have messages in the receive queue. Calling this function twice does no harm, but is unnecessary and we remove the redundant call. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18ipv4, ipv6: kill ip_mc_{join, leave}_group and ipv6_sock_mc_{join, drop}Marcelo Ricardo Leitner
in favor of their inner __ ones, which doesn't grab rtnl. As these functions need to operate on a locked socket, we can't be grabbing rtnl by then. It's too late and doing so causes reversed locking. So this patch: - move rtnl handling to callers instead while already fixing some reversed locking situations, like on vxlan and ipvs code. - renames __ ones to not have the __ mark: __ip_mc_{join,leave}_group -> ip_mc_{join,leave}_group __ipv6_sock_mc_{join,drop} -> ipv6_sock_mc_{join,drop} Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-18tipc: Use rhashtable max/min_size instead of max/min_shiftHerbert Xu
This patch converts tipc to use rhashtable max/min_size instead of the obsolete max/min_shift. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17tipc: withdraw tipc topology server name when namespace is deletedYing Xue
The TIPC topology server is a per namespace service associated with the tipc name {1, 1}. When a namespace is deleted, that name must be withdrawn before we call sk_release_kernel because the kernel socket release is done in init_net and trying to withdraw a TIPC name published in another namespace will fail with an error as: [ 170.093264] Unable to remove local publication [ 170.093264] (type=1, lower=1, ref=2184244004, key=2184244005) We fix this by breaking the association between the topology server name and socket before calling sk_release_kernel. Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17tipc: fix a potential deadlock when nametable is purgedYing Xue
[ 28.531768] ============================================= [ 28.532322] [ INFO: possible recursive locking detected ] [ 28.532322] 3.19.0+ #194 Not tainted [ 28.532322] --------------------------------------------- [ 28.532322] insmod/583 is trying to acquire lock: [ 28.532322] (&(&nseq->lock)->rlock){+.....}, at: [<ffffffffa000d219>] tipc_nametbl_remove_publ+0x49/0x2e0 [tipc] [ 28.532322] [ 28.532322] but task is already holding lock: [ 28.532322] (&(&nseq->lock)->rlock){+.....}, at: [<ffffffffa000e0dc>] tipc_nametbl_stop+0xfc/0x1f0 [tipc] [ 28.532322] [ 28.532322] other info that might help us debug this: [ 28.532322] Possible unsafe locking scenario: [ 28.532322] [ 28.532322] CPU0 [ 28.532322] ---- [ 28.532322] lock(&(&nseq->lock)->rlock); [ 28.532322] lock(&(&nseq->lock)->rlock); [ 28.532322] [ 28.532322] *** DEADLOCK *** [ 28.532322] [ 28.532322] May be due to missing lock nesting notation [ 28.532322] [ 28.532322] 3 locks held by insmod/583: [ 28.532322] #0: (net_mutex){+.+.+.}, at: [<ffffffff8163e30f>] register_pernet_subsys+0x1f/0x50 [ 28.532322] #1: (&(&tn->nametbl_lock)->rlock){+.....}, at: [<ffffffffa000e091>] tipc_nametbl_stop+0xb1/0x1f0 [tipc] [ 28.532322] #2: (&(&nseq->lock)->rlock){+.....}, at: [<ffffffffa000e0dc>] tipc_nametbl_stop+0xfc/0x1f0 [tipc] [ 28.532322] [ 28.532322] stack backtrace: [ 28.532322] CPU: 1 PID: 583 Comm: insmod Not tainted 3.19.0+ #194 [ 28.532322] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007 [ 28.532322] ffffffff82394460 ffff8800144cb928 ffffffff81792f3e 0000000000000007 [ 28.532322] ffffffff82394460 ffff8800144cba28 ffffffff810a8080 ffff8800144cb998 [ 28.532322] ffffffff810a4df3 ffff880013e9cb10 ffffffff82b0d330 ffff880013e9cb38 [ 28.532322] Call Trace: [ 28.532322] [<ffffffff81792f3e>] dump_stack+0x4c/0x65 [ 28.532322] [<ffffffff810a8080>] __lock_acquire+0x740/0x1ca0 [ 28.532322] [<ffffffff810a4df3>] ? __bfs+0x23/0x270 [ 28.532322] [<ffffffff810a7506>] ? check_irq_usage+0x96/0xe0 [ 28.532322] [<ffffffff810a8a73>] ? __lock_acquire+0x1133/0x1ca0 [ 28.532322] [<ffffffffa000d219>] ? tipc_nametbl_remove_publ+0x49/0x2e0 [tipc] [ 28.532322] [<ffffffff810a9c0c>] lock_acquire+0x9c/0x140 [ 28.532322] [<ffffffffa000d219>] ? tipc_nametbl_remove_publ+0x49/0x2e0 [tipc] [ 28.532322] [<ffffffff8179c41f>] _raw_spin_lock_bh+0x3f/0x50 [ 28.532322] [<ffffffffa000d219>] ? tipc_nametbl_remove_publ+0x49/0x2e0 [tipc] [ 28.532322] [<ffffffffa000d219>] tipc_nametbl_remove_publ+0x49/0x2e0 [tipc] [ 28.532322] [<ffffffffa000e11e>] tipc_nametbl_stop+0x13e/0x1f0 [tipc] [ 28.532322] [<ffffffffa000dfe5>] ? tipc_nametbl_stop+0x5/0x1f0 [tipc] [ 28.532322] [<ffffffffa0004bab>] tipc_init_net+0x13b/0x150 [tipc] [ 28.532322] [<ffffffffa0004a75>] ? tipc_init_net+0x5/0x150 [tipc] [ 28.532322] [<ffffffff8163dece>] ops_init+0x4e/0x150 [ 28.532322] [<ffffffff810aa66d>] ? trace_hardirqs_on+0xd/0x10 [ 28.532322] [<ffffffff8163e1d3>] register_pernet_operations+0xf3/0x190 [ 28.532322] [<ffffffff8163e31e>] register_pernet_subsys+0x2e/0x50 [ 28.532322] [<ffffffffa002406a>] tipc_init+0x6a/0x1000 [tipc] [ 28.532322] [<ffffffffa0024000>] ? 0xffffffffa0024000 [ 28.532322] [<ffffffff810002d9>] do_one_initcall+0x89/0x1c0 [ 28.532322] [<ffffffff811b7cb0>] ? kmem_cache_alloc_trace+0x50/0x1b0 [ 28.532322] [<ffffffff810e725b>] ? do_init_module+0x2b/0x200 [ 28.532322] [<ffffffff810e7294>] do_init_module+0x64/0x200 [ 28.532322] [<ffffffff810e9353>] load_module+0x12f3/0x18e0 [ 28.532322] [<ffffffff810e5890>] ? show_initstate+0x50/0x50 [ 28.532322] [<ffffffff810e9a19>] SyS_init_module+0xd9/0x110 [ 28.532322] [<ffffffff8179f3b3>] sysenter_dispatch+0x7/0x1f Before tipc_purge_publications() calls tipc_nametbl_remove_publ() to remove a publication with a name sequence, the name sequence's lock is held. However, when tipc_nametbl_remove_publ() calling tipc_nameseq_remove_publ() to remove the publication, it first tries to query name sequence instance with the publication, and then holds the lock of the found name sequence. But as the lock may be already taken in tipc_purge_publications(), deadlock happens like above scenario demonstrated. As tipc_nameseq_remove_publ() doesn't grab name sequence's lock, the deadlock can be avoided if it's directly invoked by tipc_purge_publications(). Fixes: 97ede29e80ee ("tipc: convert name table read-write lock to RCU") Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-17tipc: fix netns refcnt leakYing Xue
When the TIPC module is loaded, we launch a topology server in kernel space, which in its turn is creating TIPC sockets for communication with topology server users. Because both the socket's creator and provider reside in the same module, it is necessary that the TIPC module's reference count remains zero after the server is started and the socket created; otherwise it becomes impossible to perform "rmmod" even on an idle module. Currently, we achieve this by defining a separate "tipc_proto_kern" protocol struct, that is used only for kernel space socket allocations. This structure has the "owner" field set to NULL, which restricts the module reference count from being be bumped when sk_alloc() for local sockets is called. Furthermore, we have defined three kernel-specific functions, tipc_sock_create_local(), tipc_sock_release_local() and tipc_sock_accept_local(), to avoid the module counter being modified when module local sockets are created or deleted. This has worked well until we introduced name space support. However, after name space support was introduced, we have observed that a reference count leak occurs, because the netns counter is not decremented in tipc_sock_delete_local(). This commit remedies this problem. But instead of just modifying tipc_sock_delete_local(), we eliminate the whole parallel socket handling infrastructure, and start using the regular sk_create_kern(), kernel_accept() and sk_release_kernel() calls. Since those functions manipulate the module counter, we must now compensate for that by explicitly decrementing the counter after module local sockets are created, and increment it just before calling sk_release_kernel(). Fixes: a62fbccecd62 ("tipc: make subscriber server support net namespace") Signed-off-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericson.com> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reported-by: Cong Wang <cwang@twopensource.com> Tested-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-14tipc: clean up handling of message prioritiesJon Paul Maloy
Messages transferred by TIPC are assigned an "importance priority", -an integer value indicating how to treat the message when there is link or destination socket congestion. There is no separate header field for this value. Instead, the message user values have been chosen in ascending order according to perceived importance, so that the message user field can be used for this. This is not a good solution. First, we have many more users than the needed priority levels, so we end up with treating more priority levels than necessary. Second, the user field cannot always accurately reflect the priority of the message. E.g., a message fragment packet should really have the priority of the enveloped user data message, and not the priority of the MSG_FRAGMENTER user. Until now, we have been working around this problem in different ways, but it is now time to implement a consistent way of handling such priorities, although still within the constraint that we cannot allocate any more bits in the regular data message header for this. In this commit, we define a new priority level, TIPC_SYSTEM_IMPORTANCE, that will be the only one used apart from the four (lower) user data levels. All non-data messages map down to this priority. Furthermore, we take some free bits from the MSG_FRAGMENTER header and allocate them to store the priority of the enveloped message. We then adjust the functions msg_importance()/msg_set_importance() so that they read/set the correct header fields depending on user type. This small protocol change is fully compatible, because the code at the receiving end of a link currently reads the importance level only from user data messages, where there is no change. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-14tipc: split link outqueueJon Paul Maloy
struct tipc_link contains one single queue for outgoing packets, where both transmitted and waiting packets are queued. This infrastructure is hard to maintain, because we need to keep a number of fields to keep track of which packets are sent or unsent, and the number of packets in each category. A lot of code becomes simpler if we split this queue into a transmission queue, where sent/unacknowledged packets are kept, and a backlog queue, where we keep the not yet sent packets. In this commit we do this separation. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-14tipc: eliminate unnecessary call to broadcast ack functionJon Paul Maloy
The unicast packet header contains a broadcast acknowledge sequence number, that may need to be conveyed to the broadcast link for proper treatment. Currently, the function tipc_rcv(), which is on the most critical data path, calls the function tipc_bclink_acknowledge() to have this done. This call is made for each received packet, and results in the unconditional grabbing of the broadcast link spinlock. This is unnecessary, since we can see directly from tipc_rcv() if the acknowledged number differs from what has been previously acked from the node in question. In the vast majority of cases the numbers won't differ, and there is nothing to update. We now make the call to tipc_bclink_acknowledge() conditional to that the two ack values differ. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-14tipc: extract bundled buffers by cloning instead of copyingJon Paul Maloy
When we currently extract a bundled buffer from a message bundle in the function tipc_msg_extract(), we allocate a new buffer and explicitly copy the linear data area. This is unnecessary, since we can just clone the buffer and do skb_pull() on the clone to move the data pointer to the correct position. This is what we do in this commit. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-14tipc: eliminate unnecessary linearization of incoming buffersJon Paul Maloy
Currently, TIPC linearizes all incoming buffers directly at reception before passing them upwards in the stack. This is clearly a waste of CPU resources, and must be avoided. In this commit, we eliminate this unnecessary linearization. We still ensure that at least the message header is linear, and that the buffer is linearized where this is still needed, i.e. when unbundling and when reversing messages. In addition, we ensure that fragmented messages are validated after reassembly before delivering them upwards in the stack. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-14tipc: move message validation function to msg.cJon Paul Maloy
The function link_buf_validate() is in reality re-entrant and context independent, and will in later commits be called from several locations. Therefore, we move it to msg.c, make it outline and rename the it to tipc_msg_validate(). We also redesign the function to make proper use of pskb_may_pull() Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-14tipc: add framework for node capabilities exchangeJon Paul Maloy
The TIPC protocol spec has defined a 13 bit capability bitmap in the neighbor discovery header, as a means to maintain compatibility between different code and protocol generations. Until now this field has been unused. We now introduce the basic framework for exchanging capabilities between nodes at first contact. After exchange, a peer node's capabilities are stored as a 16 bit bitmap in struct tipc_node. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-10tipc: ensure that idle links are deleted when a bearer is disabledJon Paul Maloy
commit afaa3f65f65fda2e7b190aac7e2a75d9a2a77cb6 (tipc: purge links when bearer is disabled) was an attempt to resolve a problem that turned out to have a more profound reason. When we disable a bearer, we delete all its pertaining links if there is no other bearer to perform failover to, or if the module is shutting down. In case there are dual bearers, we wait with deleting links until the failover procedure is finished. However, this misses the case when a link on the removed bearer was already down, so that there will be no failover procedure to finish the link delete. This causes confusion if a new bearer is added to replace the removed one, and also entails a small memory leak. This commit takes the current state of the link into account when deciding when to delete it, and also reverses the above-mentioned commit. Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/cadence/macb.c Overlapping changes in macb driver, mostly fixes and cleanups in 'net' overlapping with the integration of at91_ether into macb in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-09tipc: fix bug in link failover handlingJon Paul Maloy
In commit c637c1035534867b85b78b453c38c495b58e2c5a ("tipc: resolve race problem at unicast message reception") we introduced a new mechanism for delivering buffers upwards from link to socket layer. That code contains a bug in how we handle the new link input queue during failover. When a link is reset, some of its users may be blocked because of congestion, and in order to resolve this, we add any pending wakeup pseudo messages to the link's input queue, and deliver them to the socket. This misses the case where the other, remaining link also may have congested users. Currently, the owner node's reference to the remaining link's input queue is unconditionally overwritten by the reset link's input queue. This has the effect that wakeup events from the remaining link may be unduely delayed (but not lost) for a potentially long period. We fix this by adding the pending events from the reset link to the input queue that is currently referenced by the node, whichever one it is. This commit should be applied to both net and net-next. Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-09tipc: fix inconsistent signal handling regressionErik Hugne
Commit 9bbb4ecc6819 ("tipc: standardize recvmsg routine") changed the sleep/wakeup behaviour for sockets entering recv() or accept(). In this process the order of reporting -EAGAIN/-EINTR was reversed. This caused problems with wrong errno being reported back if the timeout expires. The same problem happens if the socket is nonblocking and recv()/accept() is called when the process have pending signals. If there is no pending data read or connections to accept, -EINTR will be returned instead of -EAGAIN. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Reported-by László Benedek <laszlo.benedek@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-09tipc: sparse: fix htons conversion warningsErik Hugne
Commit d0f91938bede ("tipc: add ip/udp media type") introduced some new sparse warnings. Clean them up. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-05tipc: add ip/udp media typeErik Hugne
The ip/udp bearer can be configured in a point-to-point mode by specifying both local and remote ip/hostname, or it can be enabled in multicast mode, where links are established to all tipc nodes that have joined the same multicast group. The multicast IP address is generated based on the TIPC network ID, but can be overridden by using another multicast address as remote ip. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-05tipc: increase size of tipc discovery messagesErik Hugne
The payload area following the TIPC discovery message header is an opaque area defined by the media. INT_H_SIZE was enough for Ethernet/IB/IPv4 but needs to be expanded to carry IPv6 addressing information. Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/rocker/rocker.c The rocker commit was two overlapping changes, one to rename the ->vport member to ->pport, and another making the bitmask expression use '1ULL' instead of plain '1'. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02net: Remove iocb argument from sendmsg and recvmsgYing Xue
After TIPC doesn't depend on iocb argument in its internal implementations of sendmsg() and recvmsg() hooks defined in proto structure, no any user is using iocb argument in them at all now. Then we can drop the redundant iocb argument completely from kinds of implementations of both sendmsg() and recvmsg() in the entire networking stack. Cc: Christoph Hellwig <hch@lst.de> Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-02tipc: Don't use iocb argument in socket layerYing Xue
Currently the iocb argument is used to idenfiy whether or not socket lock is hold before tipc_sendmsg()/tipc_send_stream() is called. But this usage prevents iocb argument from being dropped through sendmsg() at socket common layer. Therefore, in the commit we introduce two new functions called __tipc_sendmsg() and __tipc_send_stream(). When they are invoked, it assumes that their callers have taken socket lock, thereby avoiding the weird usage of iocb argument. Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Reviewed-by: Erik Hugne <erik.hugne@ericsson.com> Reviewed-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-27tipc: make media address offset a common defineErik Hugne
With the exception of infiniband media which does not use media offsets, the media address is always located at offset 4 in the media info field as defined by the protocol, so we move the definition to the generic bearer.h Signed-off-by: Erik Hugne <erik.hugne@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>