summaryrefslogtreecommitdiff
path: root/net/tls/tls_main.c
AgeCommit message (Collapse)Author
2021-11-25tls: fix replacing proto_opsJakub Kicinski
We replace proto_ops whenever TLS is configured for RX. But our replacement also overrides sendpage_locked, which will crash unless TX is also configured. Similarly we plug both of those in for TLS_HW (NIC crypto offload) even tho TLS_HW has a completely different implementation for TX. Last but not least we always plug in something based on inet_stream_ops even though a few of the callbacks differ for IPv6 (getname, release, bind). Use a callback building method similar to what we do for struct proto. Fixes: c46234ebb4d1 ("tls: RX path for ktls") Fixes: d4ffb02dee2f ("net/tls: enable sk_msg redirect to tls socket egress") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
include/net/sock.h 7b50ecfcc6cd ("net: Rename ->stream_memory_read to ->sock_is_readable") 4c1e34c0dbff ("vsock: Enable y2038 safe timeval for timeout") drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c 0daa55d033b0 ("octeontx2-af: cn10k: debugfs for dumping LMTST map table") e77bcdd1f639 ("octeontx2-af: Display all enabled PF VF rsrc_alloc entries.") Adjacent code addition in both cases, keep both. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-26net: Rename ->stream_memory_read to ->sock_is_readableCong Wang
The proto ops ->stream_memory_read() is currently only used by TCP to check whether psock queue is empty or not. We need to rename it before reusing it for non-TCP protocols, and adjust the exsiting users accordingly. Signed-off-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20211008203306.37525-2-xiyou.wangcong@gmail.com
2021-10-25net/tls: getsockopt supports complete algorithm listTianjia Zhang
AES_CCM_128 and CHACHA20_POLY1305 are already supported by tls, similar to setsockopt, getsockopt also needs to support these two algorithms. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-16net/tls: support SM4 GCM/CCM algorithmTianjia Zhang
The RFC8998 specification defines the use of the ShangMi algorithm cipher suites in TLS 1.3, and also supports the GCM/CCM mode using the SM4 algorithm. Signed-off-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-01net/tls: Fix use-after-free after the TLS device goes down and upMaxim Mikityanskiy
When a netdev with active TLS offload goes down, tls_device_down is called to stop the offload and tear down the TLS context. However, the socket stays alive, and it still points to the TLS context, which is now deallocated. If a netdev goes up, while the connection is still active, and the data flow resumes after a number of TCP retransmissions, it will lead to a use-after-free of the TLS context. This commit addresses this bug by keeping the context alive until its normal destruction, and implements the necessary fallbacks, so that the connection can resume in software (non-offloaded) kTLS mode. On the TX side tls_sw_fallback is used to encrypt all packets. The RX side already has all the necessary fallbacks, because receiving non-decrypted packets is supported. The thing needed on the RX side is to block resync requests, which are normally produced after receiving non-decrypted packets. The necessary synchronization is implemented for a graceful teardown: first the fallbacks are deployed, then the driver resources are released (it used to be possible to have a tls_dev_resync after tls_dev_del). A new flag called TLS_RX_DEV_DEGRADED is added to indicate the fallback mode. It's used to skip the RX resync logic completely, as it becomes useless, and some objects may be released (for example, resync_async, which is allocated and freed by the driver). Fixes: e8f69799810c ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-11-27net/tls: add CHACHA20-POLY1305 configurationVadim Fedorenko
Add ChaCha-Poly specific configuration code. Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-13net/tls: use semicolons rather than commas to separate statementsJulia Lawall
Replace commas with semicolons. Commas introduce unnecessary variability in the code structure and are hard to see. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr> Link: https://lore.kernel.org/r/1602412498-32025-6-git-send-email-Julia.Lawall@inria.fr Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-01net/tls: Implement getsockopt SOL_TLS TLS_RXYutaro Hayakawa
Implement the getsockopt SOL_TLS TLS_RX which is currently missing. The primary usecase is to use it in conjunction with TCP_REPAIR to checkpoint/restore the TLS record layer state. TLS connection state usually exists on the user space library. So basically we can easily extract it from there, but when the TLS connections are delegated to the kTLS, it is not the case. We need to have a way to extract the TLS state from the kernel for both of TX and RX side. The new TLS_RX getsockopt copies the crypto_info to user in the same way as TLS_TX does. We have described use cases in our research work in Netdev 0x14 Transport Workshop [1]. Also, there is an TLS implementation called tlse [2] which supports TLS connection migration. They have support of kTLS and their code shows that they are expecting the future support of this option. [1] https://speakerdeck.com/yutarohayakawa/prism-proxies-without-the-pain [2] https://github.com/eduardsui/tlse Signed-off-by: Yutaro Hayakawa <yhayakawa3720@gmail.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-28net: remove sockptr_advanceChristoph Hellwig
sockptr_advance never properly worked. Replace it with _offset variants of copy_from_sockptr and copy_to_sockptr. Fixes: ba423fdaa589 ("net: add a new sockptr_t type") Reported-by: Jason A. Donenfeld <Jason@zx2c4.com> Reported-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Jason A. Donenfeld <Jason@zx2c4.com> Tested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-24net: pass a sockptr_t into ->setsockoptChristoph Hellwig
Rework the remaining setsockopt code to pass a sockptr_t instead of a plain user pointer. This removes the last remaining set_fs(KERNEL_DS) outside of architecture specific code. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> [ieee802154] Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-10Merge branch 'rwonce/rework' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/will/linux Pull READ/WRITE_ONCE rework from Will Deacon: "This the READ_ONCE rework I've been working on for a while, which bumps the minimum GCC version and improves code-gen on arm64 when stack protector is enabled" [ Side note: I'm _really_ tempted to raise the minimum gcc version to 4.9, so that we can just say that we require _Generic() support. That would allow us to more cleanly handle a lot of the cases where we depend on very complex macros with 'sizeof' or __builtin_choose_expr() with __builtin_types_compatible_p() etc. This branch has a workaround for sparse not handling _Generic(), either, but that was already fixed in the sparse development branch, so it's really just gcc-4.9 that we'd require. - Linus ] * 'rwonce/rework' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux: compiler_types.h: Use unoptimized __unqual_scalar_typeof for sparse compiler_types.h: Optimize __unqual_scalar_typeof compilation time compiler.h: Enforce that READ_ONCE_NOCHECK() access size is sizeof(long) compiler-types.h: Include naked type in __pick_integer_type() match READ_ONCE: Fix comment describing 2x32-bit atomicity gcov: Remove old GCC 3.4 support arm64: barrier: Use '__unqual_scalar_typeof' for acquire/release macros locking/barriers: Use '__unqual_scalar_typeof' for load-acquire macros READ_ONCE: Drop pointer qualifiers when reading from scalar types READ_ONCE: Enforce atomicity for {READ,WRITE}_ONCE() memory accesses READ_ONCE: Simplify implementations of {READ,WRITE}_ONCE() arm64: csum: Disable KASAN for do_csum() fault_inject: Don't rely on "return value" from WRITE_ONCE() net: tls: Avoid assigning 'const' pointer to non-const pointer netfilter: Avoid assigning 'const' pointer to non-const pointer compiler/gcc: Raise minimum GCC version for kernel builds to 4.8
2020-04-15net: tls: Avoid assigning 'const' pointer to non-const pointerWill Deacon
tls_build_proto() uses WRITE_ONCE() to assign a 'const' pointer to a 'non-const' pointer. Cleanups to the implementation of WRITE_ONCE() mean that this will give rise to a compiler warning, just like a plain old assignment would do: | net/tls/tls_main.c: In function ‘tls_build_proto’: | ./include/linux/compiler.h:229:30: warning: assignment discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers] | net/tls/tls_main.c:640:4: note: in expansion of macro ‘smp_store_release’ | 640 | smp_store_release(&saved_tcpv6_prot, prot); | | ^~~~~~~~~~~~~~~~~ Drop the const qualifier from the local 'prot' variable, as it isn't needed. Cc: Boris Pismenny <borisp@mellanox.com> Cc: Aviad Yehezkel <aviadye@mellanox.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Will Deacon <will@kernel.org>
2020-04-08net/tls: fix const assignment warningArnd Bergmann
Building with some experimental patches, I came across a warning in the tls code: include/linux/compiler.h:215:30: warning: assignment discards 'const' qualifier from pointer target type [-Wdiscarded-qualifiers] 215 | *(volatile typeof(x) *)&(x) = (val); \ | ^ net/tls/tls_main.c:650:4: note: in expansion of macro 'smp_store_release' 650 | smp_store_release(&saved_tcpv4_prot, prot); This appears to be a legitimate warning about assigning a const pointer into the non-const 'saved_tcpv4_prot' global. Annotate both the ipv4 and ipv6 pointers 'const' to make the code internally consistent. Fixes: 5bb4c45d466c ("net/tls: Read sk_prot once when building tls proto ops") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-21net/tls: Annotate access to sk_prot with READ_ONCE/WRITE_ONCEJakub Sitnicki
sockmap performs lockless writes to sk->sk_prot on the following paths: tcp_bpf_{recvmsg|sendmsg} / sock_map_unref sk_psock_put sk_psock_drop sk_psock_restore_proto WRITE_ONCE(sk->sk_prot, proto) To prevent load/store tearing [1], and to make tooling aware of intentional shared access [2], we need to annotate other sites that access sk_prot with READ_ONCE/WRITE_ONCE macros. Change done with Coccinelle with following semantic patch: @@ expression E; identifier I; struct sock *sk; identifier sk_prot =~ "^sk_prot$"; @@ ( E = -sk->sk_prot +READ_ONCE(sk->sk_prot) | -sk->sk_prot = E +WRITE_ONCE(sk->sk_prot, E) | -sk->sk_prot +READ_ONCE(sk->sk_prot) ->I ) Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-21net/tls: Read sk_prot once when building tls proto opsJakub Sitnicki
Apart from being a "tremendous" win when it comes to generated machine code (see bloat-o-meter output for x86-64 below) this mainly prepares ground for annotating access to sk_prot with READ_ONCE, so that we don't pepper the code with access annotations and needlessly repeat loads. add/remove: 0/0 grow/shrink: 0/1 up/down: 0/-46 (-46) Function old new delta tls_init 851 805 -46 Total: Before=21063, After=21017, chg -0.22% Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-21net/tls: Constify base proto ops used for building tls protoJakub Sitnicki
The helper that builds kTLS proto ops doesn't need to and should not modify the base proto ops. Annotate the parameter as read-only. Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-21net, sk_msg: Annotate lockless access to sk_prot on cloneJakub Sitnicki
sk_msg and ULP frameworks override protocol callbacks pointer in sk->sk_prot, while tcp accesses it locklessly when cloning the listening socket, that is with neither sk_lock nor sk_callback_lock held. Once we enable use of listening sockets with sockmap (and hence sk_msg), there will be shared access to sk->sk_prot if socket is getting cloned while being inserted/deleted to/from the sockmap from another CPU: Read side: tcp_v4_rcv sk = __inet_lookup_skb(...) tcp_check_req(sk) inet_csk(sk)->icsk_af_ops->syn_recv_sock tcp_v4_syn_recv_sock tcp_create_openreq_child inet_csk_clone_lock sk_clone_lock READ_ONCE(sk->sk_prot) Write side: sock_map_ops->map_update_elem sock_map_update_elem sock_map_update_common sock_map_link_no_progs tcp_bpf_init tcp_bpf_update_sk_prot sk_psock_update_proto WRITE_ONCE(sk->sk_prot, ops) sock_map_ops->map_delete_elem sock_map_delete_elem __sock_map_delete sock_map_unref sk_psock_put sk_psock_drop sk_psock_restore_proto tcp_update_ulp WRITE_ONCE(sk->sk_prot, proto) Mark the shared access with READ_ONCE/WRITE_ONCE annotations. Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200218171023.844439-2-jakub@cloudflare.com
2020-01-15bpf: Sockmap/tls, push write_space updates through ulp updatesJohn Fastabend
When sockmap sock with TLS enabled is removed we cleanup bpf/psock state and call tcp_update_ulp() to push updates to TLS ULP on top. However, we don't push the write_space callback up and instead simply overwrite the op with the psock stored previous op. This may or may not be correct so to ensure we don't overwrite the TLS write space hook pass this field to the ULP and have it fixup the ctx. This completes a previous fix that pushed the ops through to the ULP but at the time missed doing this for write_space, presumably because write_space TLS hook was added around the same time. Fixes: 95fa145479fbc ("bpf: sockmap/tls, close can race with map free") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/bpf/20200111061206.8028-4-john.fastabend@gmail.com
2019-12-06net/tls: Fix return values to avoid ENOTSUPPValentin Vidic
ENOTSUPP is not available in userspace, for example: setsockopt failed, 524, Unknown error 524 Signed-off-by: Valentin Vidic <vvidic@valentin-vidic.from.hr> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-28net/tls: use sg_next() to walk sg entriesJakub Kicinski
Partially sent record cleanup path increments an SG entry directly instead of using sg_next(). This should not be a problem today, as encrypted messages should be always allocated as arrays. But given this is a cleanup path it's easy to miss was this ever to change. Use sg_next(), and simplify the code. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Minor conflict in drivers/s390/net/qeth_l2_main.c, kept the lock from commit c8183f548902 ("s390/qeth: fix potential deadlock on workqueue flush"), removed the code which was removed by commit 9897d583b015 ("s390/qeth: consolidate some duplicated HW cmd code"). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-19net/tls: enable sk_msg redirect to tls socket egressWillem de Bruijn
Bring back tls_sw_sendpage_locked. sk_msg redirection into a socket with TLS_TX takes the following path: tcp_bpf_sendmsg_redir tcp_bpf_push_locked tcp_bpf_push kernel_sendpage_locked sock->ops->sendpage_locked Also update the flags test in tls_sw_sendpage_locked to allow flag MSG_NO_SHARED_FRAGS. bpf_tcp_sendmsg sets this. Link: https://lore.kernel.org/netdev/CA+FuTSdaAawmZ2N8nfDDKu3XLpXBbMtcCT0q4FntDD2gn8ASUw@mail.gmail.com/T/#t Link: https://github.com/wdebruij/kerneltools/commits/icept.2 Fixes: 0608c69c9a80 ("bpf: sk_msg, sock{map|hash} redirect through ULP") Fixes: f3de19af0f5b ("Revert \"net/tls: remove unused function tls_sw_sendpage_locked\"") Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
One conflict in the BPF samples Makefile, some fixes in 'net' whilst we were converting over to Makefile.target rules in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-06net/tls: add a TX lockJakub Kicinski
TLS TX needs to release and re-acquire the socket lock if send buffer fills up. TLS SW TX path currently depends on only allowing one thread to enter the function by the abuse of sk_write_pending. If another writer is already waiting for memory no new ones are allowed in. This has two problems: - writers don't wake other threads up when they leave the kernel; meaning that this scheme works for single extra thread (second application thread or delayed work) because memory becoming available will send a wake up request, but as Mallesham and Pooja report with larger number of threads it leads to threads being put to sleep indefinitely; - the delayed work does not get _scheduled_ but it may _run_ when other writers are present leading to crashes as writers don't expect state to change under their feet (same records get pushed and freed multiple times); it's hard to reliably bail from the work, however, because the mere presence of a writer does not guarantee that the writer will push pending records before exiting. Ensuring wakeups always happen will make the code basically open code a mutex. Just use a mutex. The TLS HW TX path does not have any locking (not even the sk_write_pending hack), yet it uses a per-socket sg_tx_data array to push records. Fixes: a42055e8d2c3 ("net/tls: Add support for async encryption of records for performance") Reported-by: Mallesham Jatharakonda <mallesh537@gmail.com> Reported-by: Pooja Trivedi <poojatrivedi@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-05net/tls: add statistics for installed sessionsJakub Kicinski
Add SNMP stats for number of sockets with successfully installed sessions. Break them down to software and hardware ones. Note that if hardware offload fails stack uses software implementation, and counts the session appropriately. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-05net/tls: add skeleton of MIB statisticsJakub Kicinski
Add a skeleton structure for adding TLS statistics. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net/tls: allow compiling TLS TOE outJakub Kicinski
TLS "record layer offload" requires TOE, and bypasses most of the normal networking stack. It is also significantly less maintained. Allow users to compile it out to avoid issues. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net/tls: rename tls_hw_* functions tls_toe_*Jakub Kicinski
The tls_hw_* functions are quite confusingly named, since they are related to the TOE-offload, not TLS_HW offload which doesn't require TOE. Rename them. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net/tls: move TOE-related code to a separate fileJakub Kicinski
Move tls_hw_* functions to a new, separate source file to avoid confusion with normal, non-TOE offload. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net/tls: move tls_build_proto() on init pathJakub Kicinski
Move tls_build_proto() so that TOE offload doesn't have to call it mid way through its bypass enable path. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net/tls: rename tls_device to tls_toe_deviceJakub Kicinski
Rename struct tls_device to struct tls_toe_device to avoid confusion with normal, non-TOE offload. No functional changes. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-10-04net/tls: move TOE-related structures to a separate headerJakub Kicinski
Move tls_device structure and register/unregister functions to a new header to avoid confusion with normal, non-TOE offload. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net/tls: clean up the number of #ifdefs for CONFIG_TLS_DEVICEJakub Kicinski
TLS code has a number of #ifdefs which make the code a little harder to follow. Recent fixes removed the ifdef around the TLS_HW define, so we can switch to the often used pattern of defining tls_device functions as empty static inlines in the header when CONFIG_TLS_DEVICE=n. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-05net/tls: use the full sk_proto pointerJakub Kicinski
Since we already have the pointer to the full original sk_proto stored use that instead of storing all individual callback pointers as well. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: John Hurley <john.hurley@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31net: tls: export protocol version, cipher, tx_conf/rx_conf to socket diagDavide Caratti
When an application configures kernel TLS on top of a TCP socket, it's now possible for inet_diag_handler() to collect information regarding the protocol version, the cipher type and TX / RX configuration, in case INET_DIAG_INFO is requested. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-31net/tls: use RCU protection on icsk->icsk_ulp_dataJakub Kicinski
We need to make sure context does not get freed while diag code is interrogating it. Free struct tls_context with kfree_rcu(). We add the __rcu annotation directly in icsk, and cast it away in the datapath accessor. Presumably all ULPs will do a similar thing. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-15net: tls, fix sk_write_space NULL write when tx disabledJohn Fastabend
The ctx->sk_write_space pointer is only set when TLS tx mode is enabled. When running without TX mode its a null pointer but we still set the sk sk_write_space pointer on close(). Fix the close path to only overwrite sk->sk_write_space when the current pointer is to the tls_write_space function indicating the tls module should clean it up properly as well. Reported-by: Hillf Danton <hdanton@sina.com> Cc: Ying Xue <ying.xue@windriver.com> Cc: Andrey Konovalov <andreyknvl@google.com> Fixes: 57c722e932cfb ("net/tls: swap sk_write_space on close") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-09net/tls: swap sk_write_space on closeJakub Kicinski
Now that we swap the original proto and clear the ULP pointer on close we have to make sure no callback will try to access the freed state. sk_write_space is not part of sk_prot, remember to swap it. Reported-by: syzbot+dcdc9deefaec44785f32@syzkaller.appspotmail.com Fixes: 95fa145479fb ("bpf: sockmap/tls, close can race with map free") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-05net/tls: partially revert fix transition through disconnect with closeJakub Kicinski
Looks like we were slightly overzealous with the shutdown() cleanup. Even though the sock->sk_state can reach CLOSED again, socket->state will not got back to SS_UNCONNECTED once connections is ESTABLISHED. Meaning we will see EISCONN if we try to reconnect, and EINVAL if we try to listen. Only listen sockets can be shutdown() and reused, but since ESTABLISHED sockets can never be re-connected() or used for listen() we don't need to try to clean up the ULP state early. Fixes: 32857cf57f92 ("net/tls: fix transition through disconnect with close") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-22bpf: sockmap/tls, close can race with map freeJohn Fastabend
When a map free is called and in parallel a socket is closed we have two paths that can potentially reset the socket prot ops, the bpf close() path and the map free path. This creates a problem with which prot ops should be used from the socket closed side. If the map_free side completes first then we want to call the original lowest level ops. However, if the tls path runs first we want to call the sockmap ops. Additionally there was no locking around prot updates in TLS code paths so the prot ops could be changed multiple times once from TLS path and again from sockmap side potentially leaving ops pointed at either TLS or sockmap when psock and/or tls context have already been destroyed. To fix this race first only update ops inside callback lock so that TLS, sockmap and lowest level all agree on prot state. Second and a ULP callback update() so that lower layers can inform the upper layer when they are being removed allowing the upper layer to reset prot ops. This gets us close to allowing sockmap and tls to be stacked in arbitrary order but will save that patch for *next trees. v4: - make sure we don't free things for device; - remove the checks which swap the callbacks back only if TLS is at the top. Reported-by: syzbot+06537213db7ba2745c4a@syzkaller.appspotmail.com Fixes: 02c558b2d5d6 ("bpf: sockmap, support for msg_peek in sk_msg with redirect ingress") Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-22net/tls: fix transition through disconnect with closeJohn Fastabend
It is possible (via shutdown()) for TCP socks to go through TCP_CLOSE state via tcp_disconnect() without actually calling tcp_close which would then call the tls close callback. Because of this a user could disconnect a socket then put it in a LISTEN state which would break our assumptions about sockets always being ESTABLISHED state. More directly because close() can call unhash() and unhash is implemented by sockmap if a sockmap socket has TLS enabled we can incorrectly destroy the psock from unhash() and then call its close handler again. But because the psock (sockmap socket representation) is already destroyed we call close handler in sk->prot. However, in some cases (TLS BASE/BASE case) this will still point at the sockmap close handler resulting in a circular call and crash reported by syzbot. To fix both above issues implement the unhash() routine for TLS. v4: - add note about tls offload still needing the fix; - move sk_proto to the cold cache line; - split TX context free into "release" and "free", otherwise the GC work itself is in already freed memory; - more TX before RX for consistency; - reuse tls_ctx_free(); - schedule the GC work after we're done with context to avoid UAF; - don't set the unhash in all modes, all modes "inherit" TLS_BASE's callbacks anyway; - disable the unhash hook for TLS_HW. Fixes: 3c4d7559159bf ("tls: kernel TLS support") Reported-by: Eric Dumazet <edumazet@google.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-22net/tls: remove sock unlock/lock around strp_done()John Fastabend
The tls close() callback currently drops the sock lock to call strp_done(). Split up the RX cleanup into stopping the strparser and releasing most resources, syncing strparser and finally freeing the context. To avoid the need for a strp_done() call on the cleanup path of device offload make sure we don't arm the strparser until we are sure init will be successful. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-22net/tls: remove close callback sock unlock/lock around TX work flushJohn Fastabend
The tls close() callback currently drops the sock lock, makes a cancel_delayed_work_sync() call, and then relocks the sock. By restructuring the code we can avoid droping lock and then reclaiming it. To simplify this we do the following, tls_sk_proto_close set_bit(CLOSING) set_bit(SCHEDULE) cancel_delay_work_sync() <- cancel workqueue lock_sock(sk) ... release_sock(sk) strp_done() Setting the CLOSING bit prevents the SCHEDULE bit from being cleared by any workqueue items e.g. if one happens to be scheduled and run between when we set SCHEDULE bit and cancel work. Then because SCHEDULE bit is set now no new work will be scheduled. Tested with net selftests and bpf selftests. Signed-off-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-22net/tls: don't call tls_sk_proto_close for hw record offloadJakub Kicinski
The deprecated TOE offload doesn't actually do anything in tls_sk_proto_close() - all TLS code is skipped and context not freed. Remove the callback to make it easier to refactor tls_sk_proto_close(). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-22net/tls: don't arm strparser immediately in tls_set_sw_offload()Jakub Kicinski
In tls_set_device_offload_rx() we prepare the software context for RX fallback and proceed to add the connection to the device. Unfortunately, software context prep includes arming strparser so in case of a later error we have to release the socket lock to call strp_done(). In preparation for not releasing the socket lock half way through callbacks move arming strparser into a separate function. Following patches will make use of that. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-07-01net/tls: make sure offload also gets the keys wipedJakub Kicinski
Commit 86029d10af18 ("tls: zero the crypto information from tls_context before freeing") added memzero_explicit() calls to clear the key material before freeing struct tls_context, but it missed tls_device.c has its own way of freeing this structure. Replace the missing free. Fixes: 86029d10af18 ("tls: zero the crypto information from tls_context before freeing") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24net/tls: fix page double free on TX cleanupDirk van der Merwe
With commit 94850257cf0f ("tls: Fix tls_device handling of partial records") a new path was introduced to cleanup partial records during sk_proto_close. This path does not handle the SW KTLS tx_list cleanup. This is unnecessary though since the free_resources calls for both SW and offload paths will cleanup a partial record. The visible effect is the following warning, but this bug also causes a page double free. WARNING: CPU: 7 PID: 4000 at net/core/stream.c:206 sk_stream_kill_queues+0x103/0x110 RIP: 0010:sk_stream_kill_queues+0x103/0x110 RSP: 0018:ffffb6df87e07bd0 EFLAGS: 00010206 RAX: 0000000000000000 RBX: ffff8c21db4971c0 RCX: 0000000000000007 RDX: ffffffffffffffa0 RSI: 000000000000001d RDI: ffff8c21db497270 RBP: ffff8c21db497270 R08: ffff8c29f4748600 R09: 000000010020001a R10: ffffb6df87e07aa0 R11: ffffffff9a445600 R12: 0000000000000007 R13: 0000000000000000 R14: ffff8c21f03f2900 R15: ffff8c21f03b8df0 Call Trace: inet_csk_destroy_sock+0x55/0x100 tcp_close+0x25d/0x400 ? tcp_check_oom+0x120/0x120 tls_sk_proto_close+0x127/0x1c0 inet_release+0x3c/0x60 __sock_release+0x3d/0xb0 sock_close+0x11/0x20 __fput+0xd8/0x210 task_work_run+0x84/0xa0 do_exit+0x2dc/0xb90 ? release_sock+0x43/0x90 do_group_exit+0x3a/0xa0 get_signal+0x295/0x720 do_signal+0x36/0x610 ? SYSC_recvfrom+0x11d/0x130 exit_to_usermode_loop+0x69/0xb0 do_syscall_64+0x173/0x180 entry_SYSCALL_64_after_hwframe+0x3d/0xa2 RIP: 0033:0x7fe9b9abc10d RSP: 002b:00007fe9b19a1d48 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca RAX: fffffffffffffe00 RBX: 0000000000000006 RCX: 00007fe9b9abc10d RDX: 0000000000000002 RSI: 0000000000000080 RDI: 00007fe948003430 RBP: 00007fe948003410 R08: 00007fe948003430 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00005603739d9080 R13: 00007fe9b9ab9f90 R14: 00007fe948003430 R15: 0000000000000000 Fixes: 94850257cf0f ("tls: Fix tls_device handling of partial records") Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Two easy cases of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-20net/tls: don't leak IV and record seq when offload failsJakub Kicinski
When device refuses the offload in tls_set_device_offload_rx() it calls tls_sw_free_resources_rx() to clean up software context state. Unfortunately, tls_sw_free_resources_rx() does not free all the state tls_set_sw_offload() allocated - it leaks IV and sequence number buffers. All other code paths which lead to tls_sw_release_resources_rx() (which tls_sw_free_resources_rx() calls) free those right before the call. Avoid the leak by moving freeing of iv and rec_seq into tls_sw_release_resources_rx(). Fixes: 4799ac81e52a ("tls: Add rx inline crypto offload") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2024-05-28 07:46:37 +0000