summaryrefslogtreecommitdiff
path: root/net/wireless/trace.h
AgeCommit message (Collapse)Author
2018-11-09cfg80211: add peer measurement with FTM initiator APIJohannes Berg
Add a new "peer measurement" API, that can be used to measure certain things related to a peer. Right now, only implement FTM (flight time measurement) over it, but the idea is that it'll be extensible to also support measuring the necessary things to calculate e.g. angle-of-arrival for WiGig. The API is structured to have a generic list of peers and channels to measure with/on, and then for each of those a set of measurements (again, only FTM right now) to perform. Results are sent to the requesting socket, including a final complete message. Closing the controlling netlink socket will abort a running measurement. v3: - add a bit to report "final" for partial results - remove list keeping etc. and just unicast out the results to the requester (big code reduction ...) - also send complete message unicast, and as a result remove the multicast group - separate out struct cfg80211_pmsr_ftm_request_peer from struct cfg80211_pmsr_request_peer - document timeout == 0 if no timeout - disallow setting timeout nl80211 attribute to 0, must not include attribute for no timeout - make MAC address randomization optional - change num bursts exponent default to 0 (1 burst, rather rather than the old default of 15==don't care) v4: - clarify NL80211_ATTR_TIMEOUT documentation v5: - remove unnecessary nl80211 multicast/family changes - remove partial results bit/flag, final is sufficient - add max_bursts_exponent, max_ftms_per_burst to capability - rename "frames per burst" -> "FTMs per burst" v6: - rename cfg80211_pmsr_free_wdev() to cfg80211_pmsr_wdev_down() and call it in leave, so the device can't go down with any pending measurements v7: - wording fixes (Lior) - fix ftm.max_bursts_exponent to allow having the limit of 0 (Lior) v8: - copyright statements - minor coding style fixes - fix error path leak Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-11-09cfg80211: tracing: avoid 'idx' variableJohannes Berg
This variable shadows something that gets generated inside the tracing macros, which causes sparse to warn. Avoid it so sparse output is more readable, even if it doesn't seem to cause any trouble. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02cfg80211: sort tracing properlyJohannes Berg
There were supposed to be two blocks - one for each direction cfg80211 <-> driver, clean up the code to restore that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02cfg80211: support FTM responder configuration/statisticsPradeep Kumar Chitrapu
Allow userspace to enable fine timing measurement responder functionality with configurable lci/civic parameters in AP mode. This can be done at AP start or changing beacon parameters. A new EXT_FEATURE flag is introduced for drivers to advertise the capability. Also nl80211 API support for retrieving statistics is added. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Pradeep Kumar Chitrapu <pradeepc@codeaurora.org> [remove unused cfg80211_ftm_responder_params, clarify docs, move validation into policy] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-10-02cfg80211: tracing: reuse wiphy_wdev_evt for rdev_get_txq_statsJohannes Berg
A simple cleanup, reuse the event definition that we already have. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-08-28cfg80211: Add support for 60GHz band channels 5 and 6Alexei Avshalom Lazar
The current support in the 60GHz band is for channels 1-4. Add support for channels 5 and 6. This requires enlarging ieee80211_channel.center_freq from u16 to u32. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-07-06nl80211/mac80211: allow non-linear skb in rx_control_portDenis Kenzior
The current implementation of cfg80211_rx_control_port assumed that the caller could provide a contiguous region of memory for the control port frame to be sent up to userspace. Unfortunately, many drivers produce non-linear skbs, especially for data frames. This resulted in userspace getting notified of control port frames with correct metadata (from address, port, etc) yet garbage / nonsense contents, resulting in bad handshakes, disconnections, etc. mac80211 linearizes skbs containing management frames. But it didn't seem worthwhile to do this for control port frames. Thus the signature of cfg80211_rx_control_port was changed to take the skb directly. nl80211 then takes care of obtaining control port frame data directly from the (linear | non-linear) skb. The caller is still responsible for freeing the skb, cfg80211_rx_control_port does not take ownership of it. Fixes: 6a671a50f819 ("nl80211: Add CMD_CONTROL_PORT_FRAME API") Signed-off-by: Denis Kenzior <denkenz@gmail.com> [fix some kernel-doc formatting, add fixes tag] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-05-08cfg80211: Expose TXQ stats and parameters to userspaceToke Høiland-Jørgensen
This adds support for exporting the mac80211 TXQ stats via nl80211 by way of a nested TXQ stats attribute, as well as for configuring the quantum and limits that were previously only changeable through debugfs. This commit adds just the nl80211 API, a subsequent commit adds support to mac80211 itself. Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-03-31 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Add raw BPF tracepoint API in order to have a BPF program type that can access kernel internal arguments of the tracepoints in their raw form similar to kprobes based BPF programs. This infrastructure also adds a new BPF_RAW_TRACEPOINT_OPEN command to BPF syscall which returns an anon-inode backed fd for the tracepoint object that allows for automatic detach of the BPF program resp. unregistering of the tracepoint probe on fd release, from Alexei. 2) Add new BPF cgroup hooks at bind() and connect() entry in order to allow BPF programs to reject, inspect or modify user space passed struct sockaddr, and as well a hook at post bind time once the port has been allocated. They are used in FB's container management engine for implementing policy, replacing fragile LD_PRELOAD wrapper intercepting bind() and connect() calls that only works in limited scenarios like glibc based apps but not for other runtimes in containerized applications, from Andrey. 3) BPF_F_INGRESS flag support has been added to sockmap programs for their redirect helper call bringing it in line with cls_bpf based programs. Support is added for both variants of sockmap programs, meaning for tx ULP hooks as well as recv skb hooks, from John. 4) Various improvements on BPF side for the nfp driver, besides others this work adds BPF map update and delete helper call support from the datapath, JITing of 32 and 64 bit XADD instructions as well as offload support of bpf_get_prandom_u32() call. Initial implementation of nfp packet cache has been tackled that optimizes memory access (see merge commit for further details), from Jakub and Jiong. 5) Removal of struct bpf_verifier_env argument from the print_bpf_insn() API has been done in order to prepare to use print_bpf_insn() soon out of perf tool directly. This makes the print_bpf_insn() API more generic and pushes the env into private data. bpftool is adjusted as well with the print_bpf_insn() argument removal, from Jiri. 6) Couple of cleanups and prep work for the upcoming BTF (BPF Type Format). The latter will reuse the current BPF verifier log as well, thus bpf_verifier_log() is further generalized, from Martin. 7) For bpf_getsockopt() and bpf_setsockopt() helpers, IPv4 IP_TOS read and write support has been added in similar fashion to existing IPv6 IPV6_TCLASS socket option we already have, from Nikita. 8) Fixes in recent sockmap scatterlist API usage, which did not use sg_init_table() for initialization thus triggering a BUG_ON() in scatterlist API when CONFIG_DEBUG_SG was enabled. This adds and uses a small helper sg_init_marker() to properly handle the affected cases, from Prashant. 9) Let the BPF core follow IDR code convention and therefore use the idr_preload() and idr_preload_end() helpers, which would also help idr_alloc_cyclic() under GFP_ATOMIC to better succeed under memory pressure, from Shaohua. 10) Last but not least, a spelling fix in an error message for the BPF cookie UID helper under BPF sample code, from Colin. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29nl80211: Implement TX of control port framesDenis Kenzior
This commit implements the TX side of NL80211_CMD_CONTROL_PORT_FRAME. Userspace provides the raw EAPoL frame using NL80211_ATTR_FRAME. Userspace should also provide the destination address and the protocol type to use when sending the frame. This is used to implement TX of Pre-authentication frames. If CONTROL_PORT_ETHERTYPE_NO_ENCRYPT is specified, then the driver will be asked not to encrypt the outgoing frame. A new EXT_FEATURE flag is introduced so that nl80211 code can check whether a given wiphy has capability to pass EAPoL frames over nl80211. Signed-off-by: Denis Kenzior <denkenz@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-29nl80211: Add CMD_CONTROL_PORT_FRAME APIDenis Kenzior
This commit also adds cfg80211_rx_control_port function. This is used to generate a CMD_CONTROL_PORT_FRAME event out to userspace. The conn_owner_nlportid is used as the unicast destination. This means that userspace must specify NL80211_ATTR_SOCKET_OWNER flag if control port over nl80211 routing is requested in NL80211_CMD_CONNECT, NL80211_CMD_ASSOCIATE, NL80211_CMD_START_AP or IBSS/mesh join. Signed-off-by: Denis Kenzior <denkenz@gmail.com> [johannes: fix return value of cfg80211_rx_control_port()] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-03-28treewide: remove large struct-pass-by-value from tracepoint argumentsAlexei Starovoitov
- fix trace_hfi1_ctxt_info() to pass large struct by reference instead of by value - convert 'type array[]' tracepoint arguments into 'type *array', since compiler will warn that sizeof('type array[]') == sizeof('type *array') and later should be used instead The CAST_TO_U64 macro in the later patch will enforce that tracepoint arguments can only be integers, pointers, or less than 8 byte structures. Larger structures should be passed by reference. Signed-off-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-01-31cfg80211/nl80211: Optional authentication offload to userspaceSrinivas Dasari
This interface allows the host driver to offload the authentication to user space. This is exclusively defined for host drivers that do not define separate commands for authentication and association, but rely on userspace SME (e.g., in wpa_supplicant for the ~WPA_DRIVER_FLAGS_SME case) for the authentication to happen. This can be used to implement SAE without full implementation in the kernel/firmware while still being able to use NL80211_CMD_CONNECT with driver-based BSS selection. Host driver sends NL80211_CMD_EXTERNAL_AUTH event to start/abort authentication to the port on which connect is triggered and status of authentication is further indicated by user space to host driver through the same command response interface. User space entities advertise this capability through the NL80211_ATTR_EXTERNAL_AUTH_SUPP flag in the NL80211_CMD_CONNECT request. Host drivers shall look at this capability to offload the authentication. Signed-off-by: Srinivas Dasari <dasaris@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> [add socket connection ownership check] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-12-11cfg80211: cleanup signal strength units notationSergey Matyukevich
Both cfg80211_rx_mgmt and cfg80211_report_obss_beacon functions send reports to userspace using NL80211_ATTR_RX_SIGNAL_DBM attribute w/o any processing of their input signal values. Which means that in order to match userspace tools expectations, input signal values for those functions are supposed to be in dBm units. This patch cleans up comments, variable names, and trace reports for those functions, replacing confusing 'mBm' by 'dBm'. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-13cfg80211: support 4-way handshake offloading for 802.1XAvraham Stern
Add API for setting the PMK to the driver. For FT support, allow setting also the PMK-R0 Name. This can be used by drivers that support 4-Way handshake offload while IEEE802.1X authentication is managed by upper layers. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> [arend.vanspriel@broadcom.com: add WANT_1X_4WAY_HS attribute] Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> [reword NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X docs a bit to say that the device may require it] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-28cfg80211: add request id to cfg80211_sched_scan_*() apiArend Van Spriel
Have proper request id filled in the SCHED_SCAN_RESULTS and SCHED_SCAN_STOPPED notifications toward user-space by having the driver provide it through the api. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26cfg80211: add request id parameter to .sched_scan_stop() signatureArend Van Spriel
For multiple scheduled scan support the driver needs to know which scheduled scan request is being stopped. Pass the request id in the .sched_scan_stop() callback. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-04-26nl80211: allow multiple active scheduled scan requestsArend Van Spriel
This patch implements the idea to have multiple scheduled scan requests running concurrently. It mainly illustrates how to deal with the incoming request from user-space in terms of backward compatibility. In order to use multiple scheduled scans user-space needs to provide a flag attribute NL80211_ATTR_SCHED_SCAN_MULTI to indicate support. If not the request is treated as a legacy scan. Drivers currently supporting scheduled scan are now indicating they support a single scheduled scan request. This obsoletes WIPHY_FLAG_SUPPORTS_SCHED_SCAN. Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Franky Lin <franky.lin@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> [clean up netlink destroy path to avoid allocations, code cleanups] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-03-06cfg80211: Accept multiple RSSI thresholds for CQMAndrew Zaborowski
Change the SET CQM command's RSSI threshold attribute to accept any number of thresholds as a sorted array. The API should be backwards compatible so that if one s32 threshold value is passed, the old mechanism is enabled. The netlink event generated is the same in both cases. cfg80211 handles an arbitrary number of RSSI thresholds but drivers have to provide a method (set_cqm_rssi_range_config) that configures a range set by a high and a low value. Drivers have to call back when the RSSI goes out of that range and there's no additional event for each time the range is reconfigured as there was with the current one-threshold API. This method doesn't have a hysteresis parameter because there's no benefit to the cfg80211 code from having the hysteresis be handled by hardware/driver in terms of the number of wakeups. At the same time it would likely be less consistent between drivers if offloaded or done in the drivers. Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-02-09cfg80211: fix NAN bands definitionLuca Coelho
The nl80211_nan_dual_band_conf enumeration doesn't make much sense. The default value is assigned to a bit, which makes it weird if the default bit and other bits are set at the same time. To improve this, get rid of NL80211_NAN_BAND_DEFAULT and add a wiphy configuration to let the drivers define which bands are supported. This is exposed to the userspace, which then can make a decision on which band(s) to use. Additionally, rename all "dual_band" elements to "bands", to make things clearer. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2017-02-08cfg80211: Pass new RSSI level in CQM RSSI notificationAndrzej Zaborowski
Update the drivers to pass the RSSI level as a cfg80211_cqm_rssi_notify parameter and pass this value to userspace in a new nl80211 attribute. This helps both userspace and also helps in the implementation of the multiple RSSI thresholds CQM mechanism. Note for marvell/mwifiex I pass 0 for the RSSI value because the new RSSI value is not available to the driver at the time of the cfg80211_cqm_rssi_notify call, but the driver queries the new value immediately after that, so it is actually available just a moment later if we wanted to defer caling cfg80211_cqm_rssi_notify until that moment. Without this, the new cfg80211 code (patch 3) will call .get_station which will send a duplicate HostCmd_CMD_RSSI_INFO command to the hardware. Signed-off-by: Andrew Zaborowski <andrew.zaborowski@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-27cfg80211: Add support to update connection parametersvamsi krishna
Add functionality to update the connection parameters when in connected state, so that driver/firmware uses the updated parameters for subsequent roaming. This is for drivers that support internal BSS selection and roaming. The new command does not change the current association state, i.e., it can be used to update IE contents for future (re)associations without causing an immediate disassociation or reassociation with the current BSS. This commit implements the required functionality for updating IEs for (Re)Association Request frame only. Other parameters can be added in future when required. Signed-off-by: vamsi krishna <vamsin@qti.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-10-27cfg80211: configure multicast to unicast for AP interfacesMichael Braun
Add the ability to configure if an AP (and associated VLANs) will do multicast-to-unicast conversion for ARP, IPv4 and IPv6 frames (possibly within 802.1Q). If enabled, such frames are to be sent to each station separately, with the DA replaced by their own MAC address rather than the group address. Note that this may break certain expectations of the receiver, such as the ability to drop unicast IP packets received within multicast L2 frames, or the ability to not send ICMP destination unreachable messages for packets received in L2 multicast (which is required, but the receiver can't tell the difference if this new option is enabled.) This also doesn't implement the 802.11 DMS (directed multicast service). Signed-off-by: Michael Braun <michael-dev@fami-braun.de> [fix disabling, add better documentation & commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-30cfg80211: allow the user space to change current NAN configurationAyala Beker
Some NAN configuration paramaters may change during the operation of the NAN device. For example, a user may want to update master preference value when the device gets plugged/unplugged to the power. Add API that allows to do so. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-30cfg80211: add add_nan_func / del_nan_funcAyala Beker
A NAN function can be either publish, subscribe or follow up. Make all the necessary verifications and just pass the request to the driver. Allow the user space application that starts NAN to forbid any other socket to add or remove functions. Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Ayala Beker <ayala.beker@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-30cfg80211: add start / stop NAN commandsAyala Beker
This allows user space to start/stop NAN interface. A NAN interface is like P2P device in a few aspects: it doesn't have a netdev associated to it. Add the new interface type and prevent operations that can't be executed on NAN interface like scan. Define several attributes that may be configured by user space when starting NAN functionality (master preference and dual band operation) Signed-off-by: Andrei Otcheretianski <andrei.otcheretianski@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-07-06nl80211: support beacon report scanningAvraham Stern
Beacon report radio measurement requires reporting observed BSSs on the channels specified in the beacon request. If the measurement mode is set to passive or active, it requires actually performing a scan (passive or active, accordingly), and reporting the time that the scan was started and the time each beacon/probe was received (both in terms of TSF of the BSS of the requesting AP). If the request mode is table, this information is optional. In addition, the radio measurement request specifies the channel dwell time for the measurement. In order to use scan for beacon report when the mode is active or passive, add a parameter to scan request that specifies the channel dwell time, and add scan start time and beacon received time to scan results information. Supporting beacon report is required for Multi Band Operation (MBO). Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-12cfg80211: remove enum ieee80211_bandJohannes Berg
This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-06cfg80211: Add option to specify previous BSSID for Connect commandJouni Malinen
This extends NL80211_CMD_CONNECT to allow the NL80211_ATTR_PREV_BSSID attribute to be used similarly to way this was already allowed with NL80211_CMD_ASSOCIATE. This allows user space to request reassociation (instead of association) when already connected to an AP. This provides an option to reassociate within an ESS without having to disconnect and associate with the AP. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04cfg80211: Add support for aborting an ongoing scanVidyullatha Kanchanapally
Implement new functionality for aborting an ongoing scan. Add NL80211_CMD_ABORT_SCAN to the nl80211 interface. After aborting the scan, driver shall provide the scan status by calling cfg80211_scan_done(). Reviewed-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Vidyullatha Kanchanapally <vkanchan@qti.qualcomm.com> Signed-off-by: Sunil Dutt <usdutt@qti.qualcomm.com> [change command to take wdev instead of netdev so that it can be used on p2p-device scans] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04cfg80211: add complete data to station add/change tracingJohannes Berg
Complete the tracepoint with the missing data - it's not printed by default (a lot of it is dynamic arrays) but will be recorded and be available during post-processing. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-12-04cfg80211: Add missing tracing to cfg80211Ilan Peer
Add missing tracing for: 1. start_radar_detection() 2. set_mcast_rates() 3. set_coalesce() Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-10-13nl80211: allow BSS data to include CLOCK_BOOTTIME timestampDmitry Shmidt
For location and connectivity services, userspace would often like to know the time when the BSS was last seen. The current "last seen" value is calculated in a way that makes it less useful, especially if the system suspended in the meantime. Add the ability for the driver to report a real CLOCK_BOOTTIME stamp that can then be reported to userspace (if present). Drivers wishing to use this must be converted to the new API to call cfg80211_inform_bss_data() or cfg80211_inform_bss_frame_data(). They need to ensure the reported value is accurate enough even when the frame might have been buffered in the device (e.g. firmware.) Signed-off-by: Dmitry Shmidt <dimitrysh@google.com> [modified to use struct, inlines] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17cfg80211: use RTNL locked reg_can_beacon for IR-relaxationArik Nemtsov
The RTNL is required to check for IR-relaxation conditions that allow more channels to beacon. Export an RTNL locked version of reg_can_beacon and use it where possible in AP/STA interface type flows, where IR-relaxation may be applicable. Fixes: 06f207fc5418 ("cfg80211: change GO_CONCURRENT to IR_CONCURRENT for STA") Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-31Merge tag 'mac80211-next-for-davem-2015-03-30' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Lots of updates for net-next; along with the usual flurry of small fixes, cleanups and internal features we have: * VHT support for TDLS and IBSS (conditional on drivers though) * first TX performance improvements (the biggest will come later) * many suspend/resume (race) fixes * name_assign_type support from Tom Gundersen ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20cfg80211: add vlan to station add/change tracingJohannes Berg
This helps debug issues with VLAN modifications that are otherwise not really visible in any tracing/debugging. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-03wireless: Use eth_<foo>_addr instead of memsetJoe Perches
Use the built-in function instead of memset. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03cfg80211: add bss_type and privacy arguments in cfg80211_get_bss()Dedy Lansky
802.11ad adds new a network type (PBSS) and changes the capability field interpretation for the DMG (60G) band. The same 2 bits that were interpreted as "ESS" and "IBSS" before are re-used as a 2-bit field with 3 valid values (and 1 reserved). Valid values are: "IBSS", "PBSS" (new) and "AP". In order to get the BSS struct for the new PBSS networks, change the cfg80211_get_bss() function to take a new enum ieee80211_bss_type argument with the valid network types, as "capa_mask" and "capa_val" no longer work correctly (the search must be band-aware now.) The remaining bits in "capa_mask" and "capa_val" are used only for privacy matching so replace those two with a privacy enum as well. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> [rewrite commit log, tiny fixes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-08cfg80211: add scan time to survey dataJohannes Berg
Add the time spent scanning to the survey data so it can be reported by drivers that collect such information. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-08cfg80211: remove "channel" from survey namesJohannes Berg
All of the survey data is (currently) per channel anyway, so having the word "channel" in the name does nothing. In the next patch I'll introduce global data to the survey, where the word "channel" is actually confusing. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-19cfg80211: introduce TDLS channel switch commandsArik Nemtsov
Introduce commands to initiate and cancel TDLS channel-switching. Once TDLS channel-switching is started, the lower level driver is responsible for continually initiating channel-switch operations and returning to the base (AP) channel to listen for beacons from time to time. Upon cancellation of the channel-switch all communication between the relevant TDLS peers will continue on the base channel. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-10cfg80211: add channel switch started notificationLuciano Coelho
Add a new NL80211_CH_SWITCH_STARTED_NOTIFY message that can be sent to the userspace when a channel switch process has started. This allows userspace to take action, for instance, by requesting other interfaces to switch channel as necessary. This patch introduces a function that allows the drivers to send this notification. It should be used when the driver starts processing a channel switch initiated by a remote device (eg. when a STA receives a CSA from the AP) and when it successfully starts a userspace-triggered channel switch (eg. when hostapd triggers a channel swith in the AP). Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-11-04cfg80211: 802.11p OCB mode handlingRostislav Lisovy
This patch adds new iface type (NL80211_IFTYPE_OCB) representing the OCB (Outside the Context of a BSS) mode. When establishing a connection to the network a cfg80211_join_ocb function is called (particular nl80211_command is added as well). A mandatory parameters during the ocb_join operation are 'center frequency' and 'channel width (5/10 MHz)'. Changes done in mac80211 are minimal possible required to avoid many warnings (warning: enumeration value 'NL80211_IFTYPE_OCB' not handled in switch) during compilation. Full functionality (where needed) is added in the following patch. Signed-off-by: Rostislav Lisovy <rostislav.lisovy@fel.cvut.cz> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-20cfg80211: Specify frame and reason code for NL80211_CMD_DEL_STATIONJouni Malinen
The optional NL80211_ATTR_MGMT_SUBTYPE and NL80211_ATTR_REASON_CODE attributes can now be included in NL80211_CMD_DEL_STATION to indicate to the driver which frame (Deauthentication/Disassociation) and reason code in that frame should be used to indicate removal to the specific station. This is used by drivers that implement AP SME and generate those frames internally. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-20cfg80211: Convert del_station() callback to use a param structJouni Malinen
This makes it easier to add new parameters for the del_station calls without having to modify all drivers that use this. Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-10-09cfg80211: add ops to query mesh proxy path tableHenning Rogge
Add two new cfg80211 operations for querying a table with proxied mesh paths. Signed-off-by: Henning Rogge <henning.rogge@fkie.fraunhofer.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-11cfg80211: add WMM traffic stream APIJohannes Berg
Add nl80211 and driver API to validate, add and delete traffic streams with appropriate settings. The API calls for userspace doing the action frame handshake with the peer, and then allows only to set up the parameters in the driver. To avoid setting up a session only to tear it down again, the validate API is provided, but the real usage later can still fail so userspace must be prepared for that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-07-25Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless Conflicts: net/mac80211/cfg.c Signed-off-by: John W. Linville <linville@tuxdriver.com>
2014-07-18cfg80211: fix mic_failure tracingEliad Peller
tsc can be NULL (mac80211 currently always passes NULL), resulting in NULL-dereference. check before copying it. Cc: stable@vger.kernel.org Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>