summaryrefslogtreecommitdiff
path: root/net/wireless/wext-compat.c
AgeCommit message (Collapse)Author
2017-04-13cfg80211: move add/change interface monitor flags into paramsJohannes Berg
Instead passing both flags, which can be NULL, and vif_params, which are never NULL, move the flags into the vif_params and use BIT(0), which is invalid from userspace, to indicate that the flags were changed. While updating all drivers, fix a small bug in wil6210 where it was setting the flags to 0 instead of leaving them unchanged. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-30cfg80211: Add support for static WEP in the driverDavid Spinadel
Add support for drivers that implement static WEP internally, i.e. expose connection keys to the driver in connect flow and don't upload the keys after the connection. Signed-off-by: David Spinadel <david.spinadel@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-28cfg80211: wext: really don't store non-WEP keysJohannes Berg
Jouni reported that during (repeated) wext_pmf test runs (from the wpa_supplicant hwsim test suite) the kernel crashes. The reason is that after the key is set, the wext code still unnecessarily stores it into the key cache. Despite smatch pointing out an overflow, I failed to identify the possibility for this in the code and missed it during development of the earlier patch series. In order to fix this, simply check that we never store anything but WEP keys into the cache, adding a comment as to why that's enough. Also, since the cache is still allocated early even if it won't be used in many cases, add a comment explaining why - otherwise we'd have to roll back key settings to the driver in case of allocation failures, which is far more difficult. Fixes: 89b706fb28e4 ("cfg80211: reduce connect key caching struct size") Reported-by: Jouni Malinen <j@w1.fi> Bisected-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-13cfg80211: reduce connect key caching struct sizeJohannes Berg
After the previous patches, connect keys can only (correctly) be used for storing static WEP keys. Therefore, remove all the data for dealing with key index 4/5 and reduce the size of the key material to the maximum for WEP keys. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-09-13cfg80211: wext: only allow WEP keys to be configured before connectedJohannes Berg
When not connected, anything but WEP keys shouldn't be allowed to be configured for later - only static WEP keys make sense at this point. Change wext to reject anything else just like nl80211 does. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-05-02wext: remove a/b/g/n from SIOCGIWNAMEJohannes Berg
Since a/b/g/n no longer exist as spec amendements and VHT (ex 802.11ac) wasn't handled at all, it's better to just remove the amendment strings to avoid confusion. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2016-04-12cfg80211: remove enum ieee80211_bandJohannes Berg
This enum is already perfectly aliased to enum nl80211_band, and the only reason for it is that we get IEEE80211_NUM_BANDS out of it. There's no really good reason to not declare the number of bands in nl80211 though, so do that and remove the cfg80211 one. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-09cfg80211: wext: clear sinfo struct before calling driverJohannes Berg
Until recently, mac80211 overwrote all the statistics it could provide when getting called, but it now relies on the struct having been zeroed by the caller. This was always the case in nl80211, but wext used a static struct which could even cause values from one device leak to another. Using a static struct is OK (as even documented in a comment) since the whole usage of this function and its return value is always locked under RTNL. Not clearing the struct for calling the driver has always been wrong though, since drivers were free to only fill values they could report, so calling this for one device and then for another would always have leaked values from one to the other. Fix this by initializing the structure in question before the driver method call. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=99691 Cc: stable@vger.kernel.org Reported-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Reported-by: Alexander Kaltsas <alexkaltsas@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-28cfg80211-wext: export symbols only when neededJohannes Berg
When a fully converted cfg80211 driver needs cfg80211-wext for userspace API purposes, the symbols need not be exported. When other drivers (orinoco/hermes or ipw2200) are enabled, they do need the symbols exported as they use them directly. Make those drivers select a new CFG80211_WEXT_EXPORT Kconfig symbol (instead of just CFG80211_WEXT) and export the functions only if requested - this saves about 1/2k due to the size of EXPORT_SYMBOL() itself. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-01-08cfg80211: remove enum station_info_flagsJohannes Berg
This is really just duplicating the list of information that's already available in the nl80211 attribute, so remove the list. Two small changes are needed: * remove STATION_INFO_ASSOC_REQ_IES complete, but the length (assoc_req_ies_len) can be used instead * add NL80211_STA_INFO_RX_DROP_MISC which exists internally but not in nl80211 yet This gets rid of the duplicate maintenance of the two lists. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-09-11cfg80211: clear wext keys when freeing and removing themJohannes Berg
When freeing the keys stored for wireless extensions, clear the memory to avoid having the key material stick around in memory "forever". Similarly, when userspace overwrites a key, actually clear it instead of just setting the key length to zero. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-25cfg80211: change wiphy_to_dev function nameZhao, Gang
Name wiphy_to_rdev is more accurate to describe what the function does, i.e., return a pointer pointing to struct cfg80211_registered_device. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-04-10cfg80211: remove unused wiphy argument from cfg80211_wext_freq()Zhao, Gang
cfg80211_wext_freq() is declared in wext-compat.h, but its parameter struct wiphy's declaration is not included there. As the parameter isn't used, just remove it. Signed-off-by: Zhao, Gang <gamerh2o@gmail.com> [remove parameter instead of changing to netdev] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-09cfg80211: add sanity check for retry limit in wext-compatUjjal Roy
Block setting the wrong values through iwconfig retry command. Add sanity checking before sending the retry limit to the driver. Signed-off-by: Ujjal Roy <royujjal@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2014-01-06cfg80211: fix wext-compat for getting retry valueUjjal Roy
While getting the retry limit, wext-compat returns the value without updating the flag for retry->flags is 0. Also in this case, it updates long retry flag when short and long retry value are unequal. So, iwconfig never showing "Retry short limit" and showing "Retry long limit" when both values are unequal. Updated the flags and corrected the condition properly. Signed-off-by: Ujjal Roy <royujjal@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2013-05-25cfg80211: vastly simplify lockingJohannes Berg
Virtually all code paths in cfg80211 already (need to) hold the RTNL. As such, there's little point in having another four mutexes for various parts of the code, they just cause lock ordering issues (and much of the time, the RTNL and a few of the others need thus be held.) Simplify all this by getting rid of the extra four mutexes and just use the RTNL throughout. Only a few code changes were needed to do this and we can get rid of a work struct for bonus points. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-12-07wext: explicitly cast -110 to u8Johannes Berg
This doesn't generate any different code, but will suppress a spurious smatch warning. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26nl80211/cfg80211: support VHT channel configurationJohannes Berg
Change nl80211 to support specifying a VHT (or HT) using the control channel frequency (as before) and new attributes for the channel width and first and second center frequency. The old channel type is of course still supported for HT. Also change the cfg80211 channel definition struct to support these by adding the relevant fields to it (and removing the _type field.) This also adds new helper functions: - cfg80211_chandef_create to create a channel def struct given the control channel and channel type, - cfg80211_chandef_identical to check if two channel definitions are identical - cfg80211_chandef_compatible to check if the given channel definitions are compatible, and return the wider of the two This isn't entirely complete, but that doesn't matter until we have a driver using it. In particular, it's missing - regulatory checks on the usable bandwidth (if that even makes sense) - regulatory TX power (database can't deal with it) - a proper channel compatibility calculation for the new channel types Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-11-26cfg80211: pass a channel definition structJohannes Berg
Instead of passing a channel pointer and channel type to all functions and driver methods, pass a new channel definition struct. Right now, this struct contains just the control channel and channel type, but for VHT this will change. Also, add a small inline cfg80211_get_chandef_type() so that drivers don't need to use the _type field of the new structure all the time, which will change. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-30cfg80211: allow per interface TX power settingJohannes Berg
The TX power setting is currently per wiphy (hardware device) but with multi-channel capabilities that doesn't make much sense any more. Allow drivers (and mac80211) to advertise support for per-interface TX power configuration. When the TX power is configured for the wiphy, the wdev will be NULL and the driver can still handle that, but when a wdev is given the TX power can be set only for that wdev now. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-18cfg80211: add wrappers for registered_device_opsHila Gonen
This will allow adding central tracing like in mac80211. Signed-off-by: Hila Gonen <hila.gonen@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-07-13cfg80211/mac80211: re-add get_channel operationJohannes Berg
This essentially reverts commit 2e165b818456 but introduces the get_channel operation with a new wireless_dev argument so that you can retrieve the channel per interface. This is necessary as even though we can track all interface channels (except monitor) we can't track the channel type used. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-29cfg80211/mac80211: remove .get_channelMichal Kazior
We do not need it anymore since cfg80211 tracks monitor channel and monitor channel type. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-06-06cfg80211: clarify set_channel APIsJohannes Berg
Now that we've removed all uses of the set_channel API except for the monitor channel and in libertas, clarify this. Split the libertas mesh use into a new libertas_set_mesh_channel() operation, just to keep backward compatibility, and rename the normal set_channel() to set_monitor_channel(). Also describe the desired set_monitor_channel() semantics more clearly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05cfg80211: provide channel to join_mesh functionJohannes Berg
Just like the AP mode patch, instead of setting the channel and then joining the mesh network, provide the channel to join the network on to the join_mesh() function. Like in AP mode, you can also give the channel to the join-mesh nl80211 command now. Unlike AP mode, it picks a default channel if none was given. As libertas uses mesh mode interfaces but has no join_mesh callback and we can't simply break it, keep some compatibility code for that case and configure the channel directly for it. In the non-libertas case, where we store the channel until join, allow setting it while the interface is down. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-06-05cfg80211: disallow setting channel on WDS interfacesJohannes Berg
If it worked (Felix says it doesn't right now), the typical use-case for WDS interfaces would be to be slaved to AP mode interfaces. Therefore, it isn't necessary to set the channel on WDS interfaces. As they don't support powersave or anything like that, they also couldn't use a different channel anyway. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-04-13cfg80211: Add channel information to NL80211_CMD_GET_INTERFACEPontus Fuchs
If the current channel is known, add frequency and channel type to NL80211_CMD_GET_INTERFACE. Signed-off-by: Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-11-17Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next into for-davem Conflicts: include/net/bluetooth/bluetooth.h
2011-11-11mac80211/cfg80211: report monitor channel in wireless extensionsJohannes Berg
Just add API to get the channel & report it. Trivial really. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-10-31net: Add export.h for EXPORT_SYMBOL/THIS_MODULE to non-modulesPaul Gortmaker
These files are non modular, but need to export symbols using the macros now living in export.h -- call out the include so that things won't break when we remove the implicit presence of module.h from everywhere. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-08-08cfg80211: remove unused wext handler exportsJohannes Berg
A lot of code is dedicated to giving drivers the ability to use cfg80211's wext handlers without completely converting. However, only orinoco is currently using this, and it is only partially using it. We reduce the size of both the source and binary by removing those that nobody needs. If a driver shows up that needs it during conversion, we can add back those that are needed. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-08-08cfg80211: split wext compatibility to separate headerJohannes Berg
A lot of drivers erroneously use wext constants and don't notice since cfg80211.h includes them. Make this more split up so drivers needing wext compatibility from cfg80211 need to explicitly include that from cfg80211-wext.h. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-03-03Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x/bnx2x.h
2011-02-21fix cfg80211_wext_siwfreq lock ordering...Daniel J Blueman
I previously managed to reproduce a hang while scanning wireless channels (reproducible with airodump-ng hopping channels); subsequent lockdep instrumentation revealed a lock ordering issue. Without knowing the design intent, it looks like the locks should be taken in reverse order; please comment. ======================================================= [ INFO: possible circular locking dependency detected ] 2.6.38-rc5-341cd #4 ------------------------------------------------------- airodump-ng/15445 is trying to acquire lock: (&rdev->devlist_mtx){+.+.+.}, at: [<ffffffff816b1266>] cfg80211_wext_siwfreq+0xc6/0x100 but task is already holding lock: (&wdev->mtx){+.+.+.}, at: [<ffffffff816b125c>] cfg80211_wext_siwfreq+0xbc/0x100 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&wdev->mtx){+.+.+.}: [<ffffffff810a79d6>] lock_acquire+0xc6/0x280 [<ffffffff816d6bce>] mutex_lock_nested+0x6e/0x4b0 [<ffffffff81696080>] cfg80211_netdev_notifier_call+0x430/0x5f0 [<ffffffff8109351b>] notifier_call_chain+0x8b/0x100 [<ffffffff810935b1>] raw_notifier_call_chain+0x11/0x20 [<ffffffff81576d92>] call_netdevice_notifiers+0x32/0x60 [<ffffffff815771a4>] __dev_notify_flags+0x34/0x80 [<ffffffff81577230>] dev_change_flags+0x40/0x70 [<ffffffff8158587c>] do_setlink+0x1fc/0x8d0 [<ffffffff81586042>] rtnl_setlink+0xf2/0x140 [<ffffffff81586923>] rtnetlink_rcv_msg+0x163/0x270 [<ffffffff8159d741>] netlink_rcv_skb+0xa1/0xd0 [<ffffffff815867b0>] rtnetlink_rcv+0x20/0x30 [<ffffffff8159d39a>] netlink_unicast+0x2ba/0x300 [<ffffffff8159dd57>] netlink_sendmsg+0x267/0x3e0 [<ffffffff8155e364>] sock_sendmsg+0xe4/0x110 [<ffffffff8155f3a3>] sys_sendmsg+0x253/0x3b0 [<ffffffff81003192>] system_call_fastpath+0x16/0x1b -> #0 (&rdev->devlist_mtx){+.+.+.}: [<ffffffff810a7222>] __lock_acquire+0x1622/0x1d10 [<ffffffff810a79d6>] lock_acquire+0xc6/0x280 [<ffffffff816d6bce>] mutex_lock_nested+0x6e/0x4b0 [<ffffffff816b1266>] cfg80211_wext_siwfreq+0xc6/0x100 [<ffffffff816b2fad>] ioctl_standard_call+0x5d/0xd0 [<ffffffff816b3223>] T.808+0x163/0x170 [<ffffffff816b326a>] wext_handle_ioctl+0x3a/0x90 [<ffffffff815798d2>] dev_ioctl+0x6f2/0x830 [<ffffffff8155cf3d>] sock_ioctl+0xfd/0x290 [<ffffffff8117dffd>] do_vfs_ioctl+0x9d/0x590 [<ffffffff8117e53a>] sys_ioctl+0x4a/0x80 [<ffffffff81003192>] system_call_fastpath+0x16/0x1b other info that might help us debug this: 2 locks held by airodump-ng/15445: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff81586782>] rtnl_lock+0x12/0x20 #1: (&wdev->mtx){+.+.+.}, at: [<ffffffff816b125c>] cfg80211_wext_siwfreq+0xbc/0x100 stack backtrace: Pid: 15445, comm: airodump-ng Not tainted 2.6.38-rc5-341cd #4 Call Trace: [<ffffffff810a3f0a>] ? print_circular_bug+0xfa/0x100 [<ffffffff810a7222>] ? __lock_acquire+0x1622/0x1d10 [<ffffffff810a1f99>] ? trace_hardirqs_off_caller+0x29/0xc0 [<ffffffff810a79d6>] ? lock_acquire+0xc6/0x280 [<ffffffff816b1266>] ? cfg80211_wext_siwfreq+0xc6/0x100 [<ffffffff810a31d7>] ? mark_held_locks+0x67/0x90 [<ffffffff816d6bce>] ? mutex_lock_nested+0x6e/0x4b0 [<ffffffff816b1266>] ? cfg80211_wext_siwfreq+0xc6/0x100 [<ffffffff810a31d7>] ? mark_held_locks+0x67/0x90 [<ffffffff816b1266>] ? cfg80211_wext_siwfreq+0xc6/0x100 [<ffffffff816b1266>] ? cfg80211_wext_siwfreq+0xc6/0x100 [<ffffffff816b2fad>] ? ioctl_standard_call+0x5d/0xd0 [<ffffffff8157818b>] ? __dev_get_by_name+0x9b/0xc0 [<ffffffff816b2f50>] ? ioctl_standard_call+0x0/0xd0 [<ffffffff816b3223>] ? T.808+0x163/0x170 [<ffffffff8112ddf2>] ? might_fault+0x72/0xd0 [<ffffffff816b326a>] ? wext_handle_ioctl+0x3a/0x90 [<ffffffff8112de3b>] ? might_fault+0xbb/0xd0 [<ffffffff815798d2>] ? dev_ioctl+0x6f2/0x830 [<ffffffff810a1bae>] ? put_lock_stats+0xe/0x40 [<ffffffff810a1c8c>] ? lock_release_holdtime+0xac/0x150 [<ffffffff8155cf3d>] ? sock_ioctl+0xfd/0x290 [<ffffffff8117dffd>] ? do_vfs_ioctl+0x9d/0x590 [<ffffffff8116c8ff>] ? fget_light+0x1df/0x3c0 [<ffffffff8117e53a>] ? sys_ioctl+0x4a/0x80 [<ffffffff81003192>] ? system_call_fastpath+0x16/0x1b Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2011-01-21cfg80211: Extend channel to frequency mapping for 802.11jBruno Randolf
Extend channel to frequency mapping for 802.11j Japan 4.9GHz band, according to IEEE802.11 section 17.3.8.3.2 and Annex J. Because there are now overlapping channel numbers in the 2GHz and 5GHz band we can't map from channel to frequency without knowing the band. This is no problem as in most contexts we know the band. In places where we don't know the band (and WEXT compatibility) we assume the 2GHz band for channels below 14. This patch does not implement all channel to frequency mappings defined in 802.11, it's just an extension for 802.11j 20MHz channels. 5MHz and 10MHz channels as well as 802.11y channels have been omitted. The following drivers have been updated to reflect the API changes: iwl-3945, iwl-agn, iwmc3200wifi, libertas, mwl8k, rt2x00, wl1251, wl12xx. The drivers have been compile-tested only. Signed-off-by: Bruno Randolf <br1@einfach.org> Signed-off-by: Brian Prodoehl <bprodoehl@gmail.com> Acked-by: Luciano Coelho <coelho@ti.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-12-13cfg80211/nl80211: separate unicast/multicast default TX keysJohannes Berg
Allow userspace to specify that a given key is default only for unicast and/or multicast transmissions. Only WEP keys are for both, WPA/RSN keys set here are GTKs for multicast only. For more future flexibility, allow to specify all combiations. Wireless extensions can only set both so use nl80211; WEP keys (connect keys) must be set as default for both (but 802.1X WEP is still possible). Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-11wireless: Set some stats used by /proc/net/wireless (wext)Ben Greear
Some stats for /proc/net/wireless (and wext in general) are not being set. This patch addresses a few of those with values easily obtained from mac80211 core. Signed-off-by: Ben Greear <greearb@candelatech.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-10-06cfg80211/mac80211: allow per-station GTKsJohannes Berg
This adds API to allow adding per-station GTKs, updates mac80211 to support it, and also allows drivers to remove a key from hwaccel again when this may be necessary due to multiple GTKs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-08-30wireless extensions: fix kernel heap content leakJohannes Berg
Wireless extensions have an unfortunate, undocumented requirement which requires drivers to always fill iwp->length when returning a successful status. When a driver doesn't do this, it leads to a kernel heap content leak when userspace offers a larger buffer than would have been necessary. Arguably, this is a driver bug, as it should, if it returns 0, fill iwp->length, even if it separately indicated that the buffer contents was not valid. However, we can also at least avoid the memory content leak if the driver doesn't do this by setting the iwp length to max_tokens, which then reflects how big the buffer is that the driver may fill, regardless of how big the userspace buffer is. To illustrate the point, this patch also fixes a corresponding cfg80211 bug (since this requirement isn't documented nor was ever pointed out by anyone during code review, I don't trust all drivers nor all cfg80211 handlers to implement it correctly). Cc: stable@kernel.org [all the way back] Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-20wireless: correct sparse warning in wext-compat.cJohn W. Linville
CHECK net/wireless/wext-compat.c net/wireless/wext-compat.c:1434:5: warning: symbol 'cfg80211_wext_siwpmksa' was not declared. Should it be static? Add declaration in cfg80211.h. Also add an EXPORT_SYMBOL_GPL, since all the peer functions have it. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-06-24cfg80211/mac80211: Update set_tx_power to use mBm instead of dBm unitsJuuso Oikarinen
In preparation for a TX power setting interface in the nl80211, change the .set_tx_power function to use mBm units instead of dBm for greater accuracy and smaller power levels. Also, already in advance move the tx_power_setting enumeration to nl80211. This change affects the .tx_set_power function prototype. As a result, the corresponding changes are needed to modules using it. These are mac80211, iwmc3200wifi and rndis_wlan. Cc: Samuel Ortiz <samuel.ortiz@intel.com> Cc: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: Juuso Oikarinen <juuso.oikarinen@nokia.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Acked-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-05-11Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem Conflicts: drivers/net/wireless/ath/ar9170/main.c
2010-05-07cfg80211/mac80211: better channel handlingJohannes Berg
Currently (all tested with hwsim) you can do stupid things like setting up an AP on a certain channel, then adding another virtual interface and making that associate on another channel -- this will make the beaconing to move channel but obviously without the necessary IEs data update. In order to improve this situation, first make the configuration APIs (cfg80211 and nl80211) aware of multi-channel operation -- we'll eventually need that in the future anyway. There's one userland API change and one API addition. The API change is that now SET_WIPHY must be called with virtual interface index rather than only wiphy index in order to take effect for that interface -- luckily all current users (hostapd) do that. For monitor interfaces, the old setting is preserved, but monitors are always slaved to other devices anyway so no guarantees. The second userland API change is the introduction of a per virtual interface SET_CHANNEL command, that hostapd should use going forward to make it easier to understand what's going on (it can automatically detect a kernel with this command). Other than mac80211, no existing cfg80211 drivers are affected by this change because they only allow a single virtual interface. mac80211, however, now needs to be aware that the channel settings are per interface now, and needs to disallow (for now) real multi-channel operation, which is another important part of this patch. One of the immediate benefits is that you can now start hostapd to operate on a hardware that already has a connection on another virtual interface, as long as you specify the same channel. Note that two things are left unhandled (this is an improvement -- not a complete fix): * different HT/no-HT modes currently you could start an HT AP and then connect to a non-HT network on the same channel which would configure the hardware for no HT; that can be fixed fairly easily * CSA An AP we're connected to on a virtual interface might indicate switching channels, and in that case we would follow it, regardless of how many other interfaces are operating; this requires more effort to fix but is pretty rare after all Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-02-19nl80211: add power save commandsKalle Valo
The most needed command from nl80211, which Wireless Extensions had, is support for power save mode. Add a simple command to make it possible to enable and disable power save via nl80211. I was also planning about extending the interface, for example adding the timeout value, but after thinking more about this I decided not to do it. Basically there were three reasons: Firstly, the parameters for power save are very much hardware dependent. Trying to find a unified interface which would work with all hardware, and still make sense to users, will be very difficult. Secondly, IEEE 802.11 power save implementation in Linux is still in state of flux. We have a long way to still to go and there is no way to predict what kind of implementation we will have after few years. And because we need to support nl80211 interface a long time, practically forever, adding now parameters to nl80211 might create maintenance problems later on. Third issue are the users. Power save parameters are mostly used for debugging, so debugfs is better, more flexible, interface for this. For example, wpa_supplicant currently doesn't configure anything related to power save mode. It's better to strive that kernel can automatically optimise the power save parameters, like with help of pm qos network and other traffic parameters. Later on, when we have better understanding of power save, we can extend this command with more features, if there's a need for that. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-27cfg80211: fix wext-compat for setting rate to 'auto'John W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12cfg80211/mac80211: Use more generic bitrate mask for rate controlJouni Malinen
Extend struct cfg80211_bitrate_mask to actually use a bitfield mask instead of just a single fixed or maximum rate index. This change itself does not modify the behavior (except for debugfs files), but it prepares cfg80211 and mac80211 for a new nl80211 command for setting which rates can be used in TX rate control. Since frames are now going through the rate control algorithm unconditionally, the internal IEEE80211_TX_INTFL_RCALGO flag can now be removed. The RC implementations can use the rate_idx_mask value to optimize their behavior if only a single rate is enabled. The old max_rate_idx in struct ieee80211_tx_rate_control is maintained (but commented as deprecated) for backwards compatibility with existing RC implementations. Once these implementations have been updated to use the more generic rate_idx_mask, the max_rate_idx value can be removed. Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6John W. Linville
2009-12-21wireless: report reasonable bitrate for MCS rates through wextJohn W. Linville
Previously, cfg80211 had reported "0" for MCS (i.e. 802.11n) bitrates through the wireless extensions interface. However, nl80211 was converting MCS rates into a reasonable bitrate number. This patch moves the nl80211 code to cfg80211 where it is now shared between both the nl80211 interface and the wireless extensions interface. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-09cfg80211: Clear encryption privacy when key off is done.Vivek Natarajan
When the current_bss is not set, 'iwconfig <iface> key off' does not clear the private flag. Hence after we connect with WEP to an AP and then try to connect with another non-WEP AP, it does not work. This issue will not be seen if supplicant is used. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>