summaryrefslogtreecommitdiff
path: root/net/wireless
AgeCommit message (Collapse)Author
2019-02-22Merge remote-tracking branch 'net-next/master' into mac80211-nextJohannes Berg
Merge net-next to resolve a conflict and to get the mac80211 rhashtable fixes so further patches can be applied on top. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22cfg80211: allow sending vendor events unicastJohannes Berg
Sometimes, we may want to transport higher bandwidth data through vendor events, and in that case sending it multicast is a bad idea. Allow vendor events to be unicast. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22cfg80211: Report Association Request frame IEs in association eventsJouni Malinen
This extends the NL80211_CMD_ASSOCIATE event case to report NL80211_ATTR_REQ_IE similarly to what is already done with the NL80211_CMD_CONNECT events if the driver provides this information. In practice, this adds (Re)Association Request frame information element reporting to mac80211 drivers for the cases where user space SME is used. This provides more information for user space to figure out which capabilities were negotiated for the association. For example, this can be used to determine whether HT, VHT, or HE is used. Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-22cfg80211: pmsr: use eth_broadcast_addr() to assign broadcast addressMao Wenan
This patch is to use eth_broadcast_addr() to assign broadcast address insetad of memset(). Signed-off-by: Mao Wenan <maowenan@huawei.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The netfilter conflicts were rather simple overlapping changes. However, the cls_tcindex.c stuff was a bit more complex. On the 'net' side, Cong is fixing several races and memory leaks. Whilst on the 'net-next' side we have Vlad adding the rtnl-ness support. What I've decided to do, in order to resolve this, is revert the conversion over to using a workqueue that Cong did, bringing us back to pure RCU. I did it this way because I believe that either Cong's races don't apply with have Vlad did things, or Cong will have to implement the race fix slightly differently. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-11cfg80211: Use const more consistently in for_each_element macrosJouni Malinen
Enforce the first argument to be a correct type of a pointer to struct element and avoid unnecessary typecasts from const to non-const pointers (the change in validate_ie_attr() is needed to make this part work). In addition, avoid signed/unsigned comparison within for_each_element() and mark struct element packed just in case. Signed-off-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-11cfg80211: prevent speculation on cfg80211_classify8021d() returnJohannes Berg
It's possible that the caller of cfg80211_classify8021d() uses the value to index an array, like mac80211 in ieee80211_downgrade_queue(). Prevent speculation on the return value. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-11cfg80211: pmsr: record netlink port IDJohannes Berg
Without recording the netlink port ID, we cannot return the results or complete messages to userspace, nor will we be able to abort if the socket is closed, so clearly we need to fill the value. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-11nl80211: Fix FTM per burst maximum valueAviya Erenfeld
Fix FTM per burst maximum value from 15 to 31 (The maximal bits that represents that number in the frame is 5 hence a maximal value of 31) Signed-off-by: Aviya Erenfeld <aviya.erenfeld@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-11cfg80211: restore regulatory without calling userspaceJohannes Berg
Jouni reports that in some cases it is possible that getting disconnected (or stopping AP, after previous patches) results in further operations hitting the window within the regulatory core restoring the regdomain to the defaults. The reason for this is that we have to call out to CRDA or otherwise do some asynchronous work, and thus can't do the restore atomically. However, we've previously seen all the data we need to do the restore, so we can hang on to that data and use it later for the restore. This makes the whole thing happen within a single locked section and thus atomic. However, we can't *always* do this - there are unfortunately cases where the restore needs to re-request, because this is also used (abused?) as an error recovery process, so make the new behaviour optional and only use it when doing a regular restore as described above. Reported-by: Jouni Malinen <j@w1.fi> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
An ipvlan bug fix in 'net' conflicted with the abstraction away of the IPV6 specific support in 'net-next'. Similarly, a bug fix for mlx5 in 'net' conflicted with the flow action conversion in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-08cfg80211: fix memory leak of new_ieSara Sharon
new_ie is used as a temporary storage for the generation of the new elements. However, after copying from it the memory wasn't freed and leaked. Free it. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: fix the IE inheritance of extension IEsSara Sharon
Extension IEs have ID 255 followed by extension ID. Current code is buggy in handling it in two ways: 1. When checking if IE is in the frame, it uses just the ID, which for extension elements is too broad. 2. It uses 0xFF to mark copied IEs, which will result in not copying extension IEs from the subelement. Fix both issue. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: save multi-bssid propertiesSara Sharon
When the new IEs are generated, the multiple BSSID elements are not saved. Save aside properties that are needed later for PS. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: make BSSID generation function inlineSara Sharon
This will enable reuse by mac80211. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: parse multi-bssid only if HW supports itSara Sharon
Parsing and exposing nontransmitted APs is problematic when underlying HW doesn't support it. Do it only if driver indicated support. Allow HE restriction as well, since the HE spec defined the exact manner that Multiple BSSID set should behave. APs that not support the HE spec will have less predictable Multiple BSSID set support/behavior Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: Move Multiple BSS info to struct cfg80211_bss to be visibleSara Sharon
Previously the transmitted BSS and the non-trasmitted BSS list were defined in struct cfg80211_internal_bss. Move them to struct cfg80211_bss since mac80211 needs this info. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: Properly track transmitting and non-transmitting BSSSara Sharon
When holding data of the non-transmitting BSS, we need to keep the transmitting BSS data on. Otherwise it will be released, and release the non-transmitting BSS with it. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: use for_each_element() for multi-bssid parsingJohannes Berg
Use the new for_each_element() helper here, we cannot use for_each_subelement() since we have a fixed 1 byte before the subelements start. While at it, also fix le16_to_cpup() to be get_unaligned_le16() since we don't know anything about alignment. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: Parsing of Multiple BSSID information in scanningPeng Xu
This extends cfg80211 BSS table processing to be able to parse Multiple BSSID element from Beacon and Probe Response frames and to update the BSS profiles in internal database for non-transmitted BSSs. Signed-off-by: Peng Xu <pxu@codeaurora.org> Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08nl80211: use for_each_element() in validate_ie_attr()Johannes Berg
This makes for much simpler code, simply walk through all the elements and check that the last one found ends with the end of the data. This works because if any element is malformed the walk is aborted, we end up with a mismatch. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: add various struct element finding helpersJohannes Berg
We currently have a number of helpers to find elements that just return a u8 *, change those to return a struct element and add inlines to deal with the u8 * compatibility. Note that the match behaviour is changed to start the natch at the data, so conversion from _ie_match to _elem_match need to be done carefully. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-08cfg80211: add and use strongly typed element iteration macrosJohannes Berg
Rather than always iterating elements from frames with pure u8 pointers, add a type "struct element" that encapsulates the id/datalen/data format of them. Then, add the element iteration macros * for_each_element * for_each_element_id * for_each_element_extid which take, as their first 'argument', such a structure and iterate through a given u8 array interpreting it as elements. While at it and since we'll need it, also add * for_each_subelement * for_each_subelement_id * for_each_subelement_extid which instead of taking data/length just take an outer element and use its data/datalen. Also add for_each_element_completed() to determine if any of the loops above completed, i.e. it was able to parse all of the elements successfully and no data remained. Use for_each_element_id() in cfg80211_find_ie_match() as the first user of this. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-06cfg80211: pmsr: fix abort lockingJohannes Berg
When we destroy the interface we already hold the wdev->mtx while calling cfg80211_pmsr_wdev_down(), which assumes this isn't true and flushes the worker that takes the lock, thus leading to a deadlock. Fix this by refactoring the worker and calling its code in cfg80211_pmsr_wdev_down() directly. We still need to flush the work later to make sure it's not still running and will crash, but it will not do anything. Fixes: 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-06cfg80211: pmsr: fix MAC address settingJohannes Berg
When we *don't* have a MAC address attribute, we shouldn't try to use this - this was intended to copy the local MAC address instead, so fix it. Fixes: 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-01cfg80211: call disconnect_wk when AP stopsJohannes Berg
Since we now prevent regulatory restore during STA disconnect if concurrent AP interfaces are active, we need to reschedule this check when the AP state changes. This fixes never doing a restore when an AP is the last interface to stop. Or to put it another way: we need to re-check after anything we check here changes. Cc: stable@vger.kernel.org Fixes: 113f3aaa81bd ("cfg80211: Prevent regulatory restore during STA disconnect in concurrent interfaces") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-01netlink: reduce NLA_POLICY_NESTED{,_ARRAY} argumentsJohannes Berg
In typical cases, there's no need to pass both the maxattr and the policy array pointer, as the maxattr should just be ARRAY_SIZE(policy) - 1. Therefore, to be less error prone, just remove the maxattr argument from the default macros and deduce the size accordingly. Leave the original macros with a leading underscore to use here and in case somebody needs to pass a policy pointer where the policy isn't declared in the same place and thus ARRAY_SIZE() cannot be used. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-02-01Merge remote-tracking branch 'net-next/master' into mac80211-nextJohannes Berg
Merge net-next so that we get the changes from net, which would otherwise conflict with the NLA_POLICY_NESTED/_ARRAY changes. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-25nl80211: Allow set/del pmksa operations for APLiangwei Dong
Host drivers may offload authentication to the user space through the commit ("cfg80211: Authentication offload to user space in AP mode"). This interface can be used to implement SAE by having the userspace do authentication/PMKID key derivation and driver handle the association. A step ahead, this interface can get further optimized if the PMKID is passed to the host driver and also have it respond to the association request by the STA on a valid PMKID. This commit enables the userspace to pass the PMKID to the host drivers through the set/del pmksa operations in AP mode. Set/Del pmksa is now restricted to STA/P2P client mode only and thus the drivers might not expect them in any other(AP) mode. This commit also introduces a feature flag NL80211_EXT_FEATURE_AP_PMKSA_CACHING (johannes: renamed) to maintain the backward compatibility of such an expectation by the host drivers. These operations are allowed in AP mode only when the drivers advertize the capability through this flag. Signed-off-by: Liangwei Dong <liangwei@codeaurora.org> Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org> [rename flag to NL80211_EXT_FEATURE_AP_PMKSA_CACHING] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-25cfg80211: Authentication offload to user space in AP modeSrinivas Dasari
commit 40cbfa90218b ("cfg80211/nl80211: Optional authentication offload to userspace")' introduced authentication offload to user space by the host drivers in station mode. This commit extends the same for the AP mode too. Extend NL80211_ATTR_EXTERNAL_AUTH_SUPPORT to also claim the support of external authentication from the user space in AP mode. A new flag parameter is introduced in cfg80211_ap_settings to intend the same while "start ap". Host driver to use NL80211_CMD_FRAME interface to transmit and receive the authentication frames to / from the user space. Host driver to indicate the flag NL80211_RXMGMT_FLAG_EXTERNAL_AUTH while sending the authentication frame to the user space. This intends to the user space that the driver wishes it to process the authentication frame for certain protocols, though it had initially advertised the support for SME functionality. User space shall accordingly do the authentication and indicate its final status through the command NL80211_CMD_EXTERNAL_AUTH. Allow the command even if userspace doesn't include the attribute NL80211_ATTR_SSID for AP interface. Host driver shall continue with the association sequence and indicate the STA connection status through cfg80211_new_sta. To facilitate the host drivers in AP mode for matching the pmkid by the stations during the association, NL80211_CMD_EXTERNAL_AUTH is also enhanced to include the pmkid to drivers after the authentication. This pmkid can also be used in the STA mode to include in the association request. Also modify nl80211_external_auth to not mandate SSID in AP mode. Signed-off-by: Srinivas Dasari <dasaris@codeaurora.org> [remove useless nla_get_flag() usage] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-25cfg80211: Allow drivers to advertise supported AKM suitesVeerendranath Jakkam
There was no such capability advertisement from the driver and thus the current user space has to assume the driver to support all the AKMs. While that may be the case with some drivers (e.g., mac80211-based ones), there are cfg80211-based drivers that implement SME and have constraints on which AKMs can be supported (e.g., such drivers may need an update to support SAE AKM using NL80211_CMD_EXTERNAL_AUTH). Allow such drivers to advertise the exact set of supported AKMs so that user space tools can determine what network profile options should be allowed to be configured. Signed-off-by: Veerendranath Jakkam <vjakkam@codeaurora.org> [pmsr data might be big, start a new netlink message section] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-25cfg80211: Notify all User Hints To self managed wiphysSriram R
Currently Self Managed WIPHY's are not notified on any hints other than user cell base station hints. Self Managed wiphy's basically rely on hints from firmware and its local regdb for regulatory management, so hints from wireless core can be ignored. But all user hints needs to be notified to them to provide flexibility to these drivers to honour or ignore these user hints. Currently none of the drivers supporting self managed wiphy register a notifier with cfg80211. Hence this change does not affect any other driver behavior. Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-25cfg80211: mark expected switch fall-throughsGustavo A. R. Silva
In preparation to enabling -Wimplicit-fallthrough, mark switch cases where we are expecting to fall through. This patch fixes the following warnings: net/wireless/wext-compat.c:1327:6: warning: this statement may fall through [-Wimplicit-fallthrough=] net/wireless/wext-compat.c:1341:6: warning: this statement may fall through [-Wimplicit-fallthrough=] Warning level 3 was used: -Wimplicit-fallthrough=3 This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-25cfg80211: extend range deviation for DMGChaitanya Tata
Recently, DMG frequency bands have been extended till 71GHz, so extend the range check till 20GHz (45-71GHZ), else some channels will be marked as disabled. Signed-off-by: Chaitanya Tata <Chaitanya.Tata@bluwireless.co.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-25cfg80211: reg: remove warn_on for a normal caseChaitanya Tata
If there are simulatenous queries of regdb, then there might be a case where multiple queries can trigger request_firmware_no_wait and can have parallel callbacks being executed asynchronously. In this scenario we might hit the WARN_ON. So remove the warn_on, as the code already handles multiple callbacks gracefully. Signed-off-by: Chaitanya Tata <chaitanya.tata@bluwireless.co.uk> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-25nl80211: fix NLA_POLICY_NESTED() argumentsJohannes Berg
syzbot reported an out-of-bounds read when passing certain malformed messages into nl80211. The specific place where this happened isn't interesting, the problem is that nested policy parsing was referring to the wrong maximum attribute and thus the policy wasn't long enough. Fix this by referring to the correct attribute. Since this is really not necessary, I'll come up with a separate patch to just pass the policy instead of both, in the common case we can infer the maxattr from the size of the policy array. Reported-by: syzbot+4157b036c5f4713b1f2f@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Fixes: 9bb7e0f24e7e ("cfg80211: add peer measurement with FTM initiator API") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-19nl80211/mac80211: mesh: add mesh path change count to mpath infoJulan Hsu
Expose path change count to destination in mpath info Signed-off-by: Julan Hsu <julanhsu@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-19nl80211/mac80211: mesh: add hop count to mpath infoJulan Hsu
Expose hop count to destination information in mpath info Signed-off-by: Julan Hsu <julanhsu@google.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-01-19cfg80211: Add airtime statistics and settingsToke Høiland-Jørgensen
This adds TX airtime statistics to the cfg80211 station dump (to go along with the RX info already present), and adds a new parameter to set the airtime weight of each station. The latter allows userspace to implement policies for different stations by varying their weights. Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk> [rmanohar@codeaurora.org: fixed checkpatch warnings] Signed-off-by: Rajkumar Manoharan <rmanohar@codeaurora.org> [move airtime weight != 0 check into policy] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-27Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Add 1472-byte test to tcrypt for IPsec - Reintroduced crypto stats interface with numerous changes - Support incremental algorithm dumps Algorithms: - Add xchacha12/20 - Add nhpoly1305 - Add adiantum - Add streebog hash - Mark cts(cbc(aes)) as FIPS allowed Drivers: - Improve performance of arm64/chacha20 - Improve performance of x86/chacha20 - Add NEON-accelerated nhpoly1305 - Add SSE2 accelerated nhpoly1305 - Add AVX2 accelerated nhpoly1305 - Add support for 192/256-bit keys in gcmaes AVX - Add SG support in gcmaes AVX - ESN for inline IPsec tx in chcr - Add support for CryptoCell 703 in ccree - Add support for CryptoCell 713 in ccree - Add SM4 support in ccree - Add SM3 support in ccree - Add support for chacha20 in caam/qi2 - Add support for chacha20 + poly1305 in caam/jr - Add support for chacha20 + poly1305 in caam/qi2 - Add AEAD cipher support in cavium/nitrox" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (130 commits) crypto: skcipher - remove remnants of internal IV generators crypto: cavium/nitrox - Fix build with !CONFIG_DEBUG_FS crypto: salsa20-generic - don't unnecessarily use atomic walk crypto: skcipher - add might_sleep() to skcipher_walk_virt() crypto: x86/chacha - avoid sleeping under kernel_fpu_begin() crypto: cavium/nitrox - Added AEAD cipher support crypto: mxc-scc - fix build warnings on ARM64 crypto: api - document missing stats member crypto: user - remove unused dump functions crypto: chelsio - Fix wrong error counter increments crypto: chelsio - Reset counters on cxgb4 Detach crypto: chelsio - Handle PCI shutdown event crypto: chelsio - cleanup:send addr as value in function argument crypto: chelsio - Use same value for both channel in single WR crypto: chelsio - Swap location of AAD and IV sent in WR crypto: chelsio - remove set but not used variable 'kctx_len' crypto: ux500 - Use proper enum in hash_set_dma_transfer crypto: ux500 - Use proper enum in cryp_set_dma_transfer crypto: aesni - Add scatter/gather avx stubs, and use them in C crypto: aesni - Introduce partial block macro ..
2018-12-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Lots of conflicts, by happily all cases of overlapping changes, parallel adds, things of that nature. Thanks to Stephen Rothwell, Saeed Mahameed, and others for their guidance in these resolutions. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19Merge tag 'mac80211-next-for-davem-2018-12-19' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== This time we have too many changes to list, highlights: * virt_wifi - wireless control simulation on top of another network interface * hwsim configurability to test capabilities similar to real hardware * various mesh improvements * various radiotap vendor data fixes in mac80211 * finally the nl_set_extack_cookie_u64() we talked about previously, used for * peer measurement APIs, right now only with FTM (flight time measurement) for location * made nl80211 radio/interface announcements more complete * various new HE (802.11ax) things: updates, TWT support, ... ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-19cfg80211: fix ieee80211_get_vht_max_nss()Johannes Berg
Fix two bugs in ieee80211_get_vht_max_nss(): * the spec says we should round down (reported by Nissim) * there's a double condition, the first one is wrong, supp_width == 0 / ext_nss_bw == 2 is valid in 80+80 (found by smatch) Fixes: b0aa75f0b1b2 ("ieee80211: add new VHT capability fields/parsing") Reported-by: Nissim Bendanan <nissimx.bendanan@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-19nl80211: fix memory leak if validate_pae_over_nl80211() failsJohannes Berg
If validate_pae_over_nl80211() were to fail in nl80211_crypto_settings(), we might leak the 'connkeys' allocation. Fix this. Fixes: 64bf3d4bc2b0 ("nl80211: Add CONTROL_PORT_OVER_NL80211 attribute") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18nl80211: Add support to notify radar event info received from STASriram R
Currently radar detection and corresponding channel switch is handled at the AP device. STA ignores these detected radar events since the radar signal can be seen mostly by the AP as well. But in scenarios where a radar signal is seen only at STA, notifying this event to the AP which can trigger a channel switch can be useful. Stations can report such radar events autonomously through Spectrum management (Measurement Report) action frame to its AP. The userspace on processing the report can notify the kernel with the use of the added NL80211_CMD_NOTIFY_RADAR to indicate the detected event and inturn adding the reported channel to NOL. Signed-off-by: Sriram R <srirrama@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-18cfg80211: add some missing fall through annotationsLuca Coelho
There are talks about enabling -Wimplicit-fallthrough warnings in the mainline and it is already enabled in linux-next. Add all the missing annotations to prevent warnings when this happens. And in one case, remove the extra text from the annotation so that the compiler recognizes it. Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-12-05cfg80211: Fix busy loop regression in ieee80211_ie_split_ric()Jouni Malinen
This function was modified to support the information element extension case (WLAN_EID_EXTENSION) in a manner that would result in an infinite loop when going through set of IEs that include WLAN_EID_RIC_DATA and contain an IE that is in the after_ric array. The only place where this can currently happen is in mac80211 ieee80211_send_assoc() where ieee80211_ie_split_ric() is called with after_ric[]. This can be triggered by valid data from user space nl80211 association/connect request (i.e., requiring GENL_UNS_ADMIN_PERM). The only known application having an option to include WLAN_EID_RIC_DATA in these requests is wpa_supplicant and it had a bug that prevented this specific contents from being used (and because of that, not triggering this kernel bug in an automated test case ap_ft_ric) and now that this bug is fixed, it has a workaround to avoid this kernel issue. WLAN_EID_RIC_DATA is currently used only for testing purposes, so this does not cause significant harm for production use cases. Fixes: 2512b1b18d07 ("mac80211: extend ieee80211_ie_split to support EXTENSION") Cc: stable@vger.kernel.org Signed-off-by: Jouni Malinen <jouni@codeaurora.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-11-20crypto: drop mask=CRYPTO_ALG_ASYNC from 'cipher' tfm allocationsEric Biggers
'cipher' algorithms (single block ciphers) are always synchronous, so passing CRYPTO_ALG_ASYNC in the mask to crypto_alloc_cipher() has no effect. Many users therefore already don't pass it, but some still do. This inconsistency can cause confusion, especially since the way the 'mask' argument works is somewhat counterintuitive. Thus, just remove the unneeded CRYPTO_ALG_ASYNC flags. This patch shouldn't change any actual behavior. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-11-09{nl,mac}80211: add rssi to mesh candidatesBob Copeland
When peering is in userspace, some implementations may want to control which peers are accepted based on RSSI in addition to the information elements being sent today. Add signal level so that info is available to clients. Signed-off-by: Bob Copeland <bobcopeland@fb.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2018-11-09{nl,mac}80211: add dot11MeshConnectedToMeshGate to meshconfBob Copeland
When userspace is controlling mesh routing, it may have better knowledge about whether a mesh STA is connected to a mesh gate than the kernel mpath table. Add dot11MeshConnectedToMeshGate to the mesh config so that such applications can explicitly signal that a mesh STA is connected to a gate, which will then be advertised in the beacon. Signed-off-by: Bob Copeland <bobcopeland@fb.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>