summaryrefslogtreecommitdiff
path: root/net/wireless
AgeCommit message (Collapse)Author
2015-09-04cfg80211: regulatory: restore proper user alpha2Maciej S. Szmigiero
restore_regulatory_settings() should restore alpha2 as computed in restore_alpha2(), not raw user_alpha2 to behave as described in the comment just above that code. This fixes endless loop of calling CRDA for "00" and "97" countries after resume from suspend on my laptop. Looks like others had the same problem, too: http://ath9k-devel.ath9k.narkive.com/knY5W6St/ath9k-and-crda-messages-in-logs https://bugs.launchpad.net/ubuntu/+source/linux/+bug/899335 https://forum.porteus.org/viewtopic.php?t=4975&p=36436 https://forums.opensuse.org/showthread.php/483356-Authentication-Regulatory-Domain-issues-ath5k-12-2 Signed-off-by: Maciej Szmigiero <mail@maciej.szmigiero.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-14nl80211: Allow setting multicast rate on OCB interfacesBertold Van den Bergh
Allow setting multicast rate on OCB interfaces. Current behaviour results in EOPNOTSUPP when attempting this. Signed-off-by: Bertold Van den Bergh <bertold.vandenbergh@esat.kuleuven.be> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-14cfg80211: propagate set_wiphy failure to userspaceMichal Kazior
If driver failed to setup wiphy params (e.g. rts threshold, fragmentation treshold) userspace wasn't properly notified about this. This could lead to user confusion who would think the command succeeded even if that wasn't the case. Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-08-14cfg80211: regulatory: handle 5 and 10 MHz channels properlyMatthias May
The original assumption of 20MHz wide channels hasn't been true since the addition of support for 5 and 10 MHz channels. Change the code to no longer disable all channels that don't fit into the 20MHz grid, but instead set the appropriate flags to disable operation on specific bandwidths. Signed-off-by: Matthias May <matthias.may@neratec.com> [reword commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17Merge branch 'mac80211' into mac80211-nextJohannes Berg
This is necessary to merge the new TDLS and mesh patches, as they depend on some fixes. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17wireless: remove superfluous if statement in regulatory codeJohn Linville
Commit eeca9fce1d71 ('cfg80211: Schedule timeout for all CRDA calls') left behind a superfluous check after it removed some earlier code. In reg_process_hint, the test of "treatment == REG_REQ_IGNORE || treatment == REG_REQ_ALREADY_SET" is superfluous because the code in the if-then branch is identical to the code after the if statement. Coverity CID #1295939 I also removed the unnecessary assignment of treatment in this case, and added a comment reminding any future patch authors to ensure that treatment is properly assigned before it is used after the switch. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17cfg80211: allow mgmt_frame_register callback to sleepJohannes Berg
This callback is currently not allowed to sleep, which makes it more difficult to implement proper driver methods in mac80211 than it has to be. Instead of doing asynchronous work here in mac80211, make it possible for the callback to sleep by doing some asynchronous work in cfg80211. This also enables improvements to other drivers, like ath6kl, that would like to sleep in this callback. While at it, also fix the code to call the driver on the implicit unregistration when an interface is removed, and do that also when a P2P-Device wdev is destroyed (otherwise we leak the structs.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17cfg80211: use RTNL locked reg_can_beacon for IR-relaxationArik Nemtsov
The RTNL is required to check for IR-relaxation conditions that allow more channels to beacon. Export an RTNL locked version of reg_can_beacon and use it where possible in AP/STA interface type flows, where IR-relaxation may be applicable. Fixes: 06f207fc5418 ("cfg80211: change GO_CONCURRENT to IR_CONCURRENT for STA") Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-07-17wireless: regulatory: reduce log level of CRDA related messagesThomas Petazzoni
With a basic Linux userspace, the messages "Calling CRDA to update world regulatory domain" appears 10 times after boot every second or so, followed by a final "Exceeded CRDA call max attempts. Not calling CRDA". For those of us not having the corresponding userspace parts, having those messages repeatedly displayed at boot time is a bit annoying, so this commit reduces their log level to pr_debug(). Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-06-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2015-06-09cfg80211: wext: clear sinfo struct before calling driverJohannes Berg
Until recently, mac80211 overwrote all the statistics it could provide when getting called, but it now relies on the struct having been zeroed by the caller. This was always the case in nl80211, but wext used a static struct which could even cause values from one device leak to another. Using a static struct is OK (as even documented in a comment) since the whole usage of this function and its return value is always locked under RTNL. Not clearing the struct for calling the driver has always been wrong though, since drivers were free to only fill values they could report, so calling this for one device and then for another would always have leaked values from one to the other. Fix this by initializing the structure in question before the driver method call. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=99691 Cc: stable@vger.kernel.org Reported-by: Gerrit Renker <gerrit@erg.abdn.ac.uk> Reported-by: Alexander Kaltsas <alexkaltsas@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-29cfg80211: ignore netif running state when changing iftypeMichal Kazior
It was possible for mac80211 to be coerced into an unexpected flow causing sdata union to become corrupted. Station pointer was put into sdata->u.vlan.sta memory location while it was really master AP's sdata->u.ap.next_beacon. This led to station entry being later freed as next_beacon before __sta_info_flush() in ieee80211_stop_ap() and a subsequent invalid pointer dereference crash. The problem was that ieee80211_ptr->use_4addr wasn't cleared on interface type changes. This could be reproduced with the following steps: # host A and host B have just booted; no # wpa_s/hostapd running; all vifs are down host A> iw wlan0 set type station host A> iw wlan0 set 4addr on host A> printf 'interface=wlan0\nssid=4addrcrash\nchannel=1\nwds_sta=1' > /tmp/hconf host A> hostapd -B /tmp/conf host B> iw wlan0 set 4addr on host B> ifconfig wlan0 up host B> iw wlan0 connect -w hostAssid host A> pkill hostapd # host A crashed: [ 127.928192] BUG: unable to handle kernel NULL pointer dereference at 00000000000006c8 [ 127.929014] IP: [<ffffffff816f4f32>] __sta_info_flush+0xac/0x158 ... [ 127.934578] [<ffffffff8170789e>] ieee80211_stop_ap+0x139/0x26c [ 127.934578] [<ffffffff8100498f>] ? dump_trace+0x279/0x28a [ 127.934578] [<ffffffff816dc661>] __cfg80211_stop_ap+0x84/0x191 [ 127.934578] [<ffffffff816dc7ad>] cfg80211_stop_ap+0x3f/0x58 [ 127.934578] [<ffffffff816c5ad6>] nl80211_stop_ap+0x1b/0x1d [ 127.934578] [<ffffffff815e53f8>] genl_family_rcv_msg+0x259/0x2b5 Note: This isn't a revert of f8cdddb8d61d ("cfg80211: check iface combinations only when iface is running") as far as functionality is considered because b6a550156bc ("cfg80211/mac80211: move more combination checks to mac80211") moved the logic somewhere else already. Fixes: f8cdddb8d61d ("cfg80211: check iface combinations only when iface is running") Signed-off-by: Michal Kazior <michal.kazior@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-26cfg80211: properly send NL80211_ATTR_DISCONNECTED_BY_AP in disconnectJohannes Berg
When we disconnect from the AP, drivers call cfg80211_disconnect(). This doesn't know whether the disconnection was initiated locally or by the AP though, which can cause problems with the supplicant, for example with WPS. This issue obviously doesn't show up with any mac80211 based driver since mac80211 doesn't call this function. Fix this by requiring drivers to indicate whether the disconnect is locally generated or not. I've tried to update the drivers, but may not have gotten the values correct, and some drivers may currently not be able to report correct values. In case of doubt I left it at false, which is the current behaviour. For libertas, make adjustments as indicated by Dan Williams. Reported-by: Matthieu Mauger <matthieux.mauger@intel.com> Tested-by: Matthieu Mauger <matthieux.mauger@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-20cfg80211: Switch to PM opsLars-Peter Clausen
Use dev_pm_ops instead of the legacy suspend/resume callbacks for the wiphy class suspend and resume operations. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-06cfg80211: change GO_CONCURRENT to IR_CONCURRENT for STAArik Nemtsov
The GO_CONCURRENT regulatory definition can be extended to station interfaces requesting to IR as part of TDLS off-channel operations. Rename the GO_CONCURRENT flag to IR_CONCURRENT and allow the added use-case. Change internal users of GO_CONCURRENT to use the new definition. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Reviewed-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-05-06cfg80211: Allow GO concurrent relaxation after BSS disconnectionAvraham Stern
If a P2P GO was allowed on a channel because of the GO concurrent relaxation, i.e., another station interface was associated to an AP on the same channel or the same UNII band, and the station interface disconnected from the AP, allow the following use cases unless the channel is marked as indoor only and the device is not operating in an indoor environment: 1. Allow the P2P GO to stay on its current channel. The rationale behind this is that if the channel or UNII band were allowed by the AP they could still be used to continue the P2P GO operation, and avoid connection breakage. 2. Allow another P2P GO to start on the same channel or another channel that is in the same UNII band as the previous instantiated P2P GO. Signed-off-by: Avraham Stern <avraham.stern@intel.com> Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-24cfg80211: allow the plink state blocking for user managed meshChun-Yeow Yeoh
wpa_supplicant or authsae handles the mesh peering in user space, but the plink state is still managed in kernel space. Currently, there is no implementation by wpa_supplicant or authsae to block the plink state after it is set to ESTAB. By applying this patch, we can use the "iw mesh0 station set <MAC address> plink_action block" to block the peer mesh STA. This is useful for experimenting purposes. Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-08cfg80211: don't allow disabling WEXT if it's requiredJohannes Berg
The change to only export WEXT symbols when required could break the build if CONFIG_CFG80211_WEXT was explicitly disabled while a driver like orinoco selected it. Fix this by hiding the symbol when it's required so it can't be disabled in that case. Fixes: 2afe38d15cee ("cfg80211-wext: export symbols only when needed") Reported-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: Jim Davis <jim.epost@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-07cfg80211: send extended capabilities IE in connectJohannes Berg
If the connect request from userspace didn't include an extended capabilities IE, create one using the driver capabilities. This fixes VHT associations, since those need to set the operating mode notification capability. Reviewed-by: Gregory Greenman <gregory.greenman@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-07cfg80211: move IE split utilities here from mac80211Johannes Berg
As the next patch will require the IE splitting utility functions in cfg80211, move them there from mac80211. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-04-01cfg80211: Stop calling crda if it is not responsiveIlan peer
Patch eeca9fce1d71a4955855ceb0c3b13c1eb9db27c1 (cfg80211: Schedule timeout for all CRDA call) introduced a regression, where in case that crda is not installed (or not configured properly etc.), the regulatory core will needlessly continue to call it, polluting the log with the following log: "cfg80211: Calling CRDA to update world regulatory domain" Fix this by limiting the number of continuous CRDA request failures. Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-31Merge tag 'mac80211-next-for-davem-2015-03-30' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== Lots of updates for net-next; along with the usual flurry of small fixes, cleanups and internal features we have: * VHT support for TDLS and IBSS (conditional on drivers though) * first TX performance improvements (the biggest will come later) * many suspend/resume (race) fixes * name_assign_type support from Tom Gundersen ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31netlink: implement nla_get_in_addr and nla_get_in6_addrJiri Benc
Those are counterparts to nla_put_in_addr and nla_put_in6_addr. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31netlink: implement nla_put_in_addr and nla_put_in6_addrJiri Benc
IP addresses are often stored in netlink attributes. Add generic functions to do that. For nla_put_in_addr, it would be nicer to pass struct in_addr but this is not used universally throughout the kernel, in way too many places __be32 is used to store IPv4 address. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-30cfg80211: pass name_assign_type to rdev_add_virtual_intf()Tom Gundersen
This will expose in /sys whether the ifname of a device is set by userspace or generated by the kernel. The latter kind (wlanX, etc) is not deterministic, so userspace needs to rename these devices to names that are guaranteed to stay the same between reboots. The former, however should never be renamed, so userspace needs to be able to reliably tell the difference. Similar functionality was introduced for the rtnetlink core in commit 5517750f058e ("net: rtnetlink - make create_link take name_assign_type") Signed-off-by: Tom Gundersen <teg@jklm.no> Cc: Kalle Valo <kvalo@qca.qualcomm.com> Cc: Brett Rudley <brudley@broadcom.com> Cc: Arend van Spriel <arend@broadcom.com> Cc: Franky (Zhenhui) Lin <frankyl@broadcom.com> Cc: Hante Meuleman <meuleman@broadcom.com> Cc: Johannes Berg <johannes@sipsolutions.net> [reformat changelog to fit 72 cols] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30cfg/mac80211: add regulatory classes IE during TDLS setupArik Nemtsov
Seems Broadcom TDLS peers (Nexus 5, Xperia Z3) refuse to allow TDLS connection when channel-switching is supported but the regulatory classes IE is missing from the setup request. Add a chandef to reg-class translation function to cfg80211 and use it to add the required IE during setup. For now add only the current regulatory class as supported - it is enough to resolve the compatibility issue. Signed-off-by: Arik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-30nl80211: add net-detect delay to wowlan infoLuciano Coelho
Pass the initial net-detect delay (NL80211_ATTR_SCHED_SCAN_DELAY) attribute in the WoWLAN info response. Additionally, remove a bogus TODO comment. Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/emulex/benet/be_main.c net/core/sysctl_net_core.c net/ipv4/inet_diag.c The be_main.c conflict resolution was really tricky. The conflict hunks generated by GIT were very unhelpful, to say the least. It split functions in half and moved them around, when the real actual conflict only existed solely inside of one function, that being be_map_pci_bars(). So instead, to resolve this, I checked out be_main.c from the top of net-next, then I applied the be_main.c changes from 'net' since the last time I merged. And this worked beautifully. The inet_diag.c and sysctl_net_core.c conflicts were simple overlapping changes, and were easily to resolve. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-20cfg80211: add vlan to station add/change tracingJohannes Berg
This helps debug issues with VLAN modifications that are otherwise not really visible in any tracing/debugging. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-17cfg80211: Process all pending regulatory requests/hintsBen
It is possible that there are several regulatory requests pending, but the processing of the last one does not call CRDA, and thus the other requests are not handled. Fix this by rescheduling the work until all requests have been processed. Signed-off-by: Ben Rosenfeld <ben.rosenfeld@intel.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-16nl80211: ignore HT/VHT capabilities without QoS/WMMJohannes Berg
As HT/VHT depend heavily on QoS/WMM, it's not a good idea to let userspace add clients that have HT/VHT but not QoS/WMM. Since it does so in certain cases we've observed (client is using HT IEs but not QoS/WMM) just ignore the HT/VHT info at this point and don't pass it down to the drivers which might unconditionally use it. Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-06cfg80211: Schedule timeout for all CRDA callsIlan peer
Timeout was scheduled only in case CRDA was called due to user hints, but was not scheduled for other cases. This can result in regulatory hint processing getting stuck in case that there is no CRDA configured. Change this by scheduling a timeout every time CRDA is called. In addition, in restore_regulatory_settings() all pending requests are restored (and not only the user ones). Signed-off-by: Ilan Peer <ilan.peer@intel.com> Acked-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-06cfg80211: Add API to change the indoor regulatory settingIlan peer
Previously, the indoor setting configuration assumed that as long as a station interface is connected, the indoor environment setting does not change. However, this assumption is problematic as: - It is possible that a station interface is connected to a mobile AP, e.g., softAP or a P2P GO, where it is possible that both the station and the mobile AP move out of the indoor environment making the indoor setting invalid. In such a case, user space has no way to invalidate the setting. - A station interface disconnection does not necessarily imply that the device is no longer operating in an indoor environment, e.g., it is possible that the station interface is roaming but is still stays indoor. To handle the above, extend the indoor configuration API to allow user space to indicate a change of indoor settings, and allow it to indicate weather it controls the indoor setting, such that: 1. If the user space process explicitly indicates that it is going to control the indoor setting, do not clear the indoor setting internally, unless the socket is released. The user space process should use the NL80211_ATTR_SOCKET_OWNER attribute in the command to state that it is going to control the indoor setting. 2. Reset the indoor setting when restoring the regulatory settings in case it is not owned by a user space process. Based on the above, a user space tool that continuously monitors the indoor settings, i.e., tracking power setting, location etc., can indicate environment changes to the regulatory core. It should be noted that currently user space is the only provided mechanism used to hint to the regulatory core over the indoor/outdoor environment -- while the country IEs do have an environment setting this has been completely ignored by the regulatory core by design for a while now since country IEs typically can contain bogus data. Acked-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: ArikX Nemtsov <arik@wizery.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-06cfg80211: Simplify the handling of regulatory indoor settingIlan peer
Directly update the indoor setting without wrapping it as a regulatory request, to simplify the processing. Acked-by: Luis R. Rodriguez <mcgrof@suse.com> Signed-off-by: Ilan Peer <ilan.peer@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-04nl80211: prohibit mixing 'any' and regular wowlan triggersJohannes Berg
If the device supports waking up on 'any' signal - i.e. it continues operating as usual and wakes up the host on pretty much anything that happens, then it makes no sense to also configure the more restricted WoWLAN mode where the device operates more autonomously but also in a more restricted fashion. Currently only cw2100 supports both 'any' and other triggers, but it seems to be broken as it doesn't configure anything to the device, so we can't currently get into a situation where both even can correctly be configured. This is about to change (Intel devices are going to support both and have different behaviour depending on configuration) so make sure the conflicting modes cannot be configured. (It seems that cw2100 advertises 'any' and 'disconnect' as a means of saying that's what it will always do, but that isn't really the way this API was meant to be used nor does it actually mean anything as 'any' always implies 'disconnect' already, and the driver doesn't change device configuration in any way depending on the settings.) Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/rocker/rocker.c The rocker commit was two overlapping changes, one to rename the ->vport member to ->pport, and another making the bitmask expression use '1ULL' instead of plain '1'. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03wireless: Use eth_<foo>_addr instead of memsetJoe Perches
Use the built-in function instead of memset. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03cfg80211: add operating classes 128-130Eliad Peller
Operating classes 128-130 are defined in the 11ac spec for the 5GHz band. Update ieee80211_operating_class_to_band() to support them. Signed-off-by: Eliad Peller <eliadx.peller@intel.com> Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-03cfg80211: Allow NL80211_ATTR_IFINDEX to be added to vendor eventsAhmad Kholaif
This modifies cfg80211_vendor_event_alloc() with an additional argument struct wireless_dev *wdev. __cfg80211_alloc_event_skb() is modified to take in *wdev argument, if wdev != NULL, both the NL80211_ATTR_IFINDEX and wdev identifier are added to the vendor event. These changes make it easier for drivers to add ifindex indication in vendor events cleanly. This also updates all existing users of cfg80211_vendor_event_alloc() and __cfg80211_alloc_event_skb() in the kernel tree. Signed-off-by: Ahmad Kholaif <akholaif@qca.qualcomm.com> Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-03cfg80211: add VHT support for IBSSJanusz.Dziedzic@tieto.com
Add NL80211_EXT_FEATURE_VHT_IBSS flag and VHT support for IBSS. Signed-off-by: Janusz Dziedzic <janusz.dziedzic@tieto.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-03-03cfg80211: add bss_type and privacy arguments in cfg80211_get_bss()Dedy Lansky
802.11ad adds new a network type (PBSS) and changes the capability field interpretation for the DMG (60G) band. The same 2 bits that were interpreted as "ESS" and "IBSS" before are re-used as a 2-bit field with 3 valid values (and 1 reserved). Valid values are: "IBSS", "PBSS" (new) and "AP". In order to get the BSS struct for the new PBSS networks, change the cfg80211_get_bss() function to take a new enum ieee80211_bss_type argument with the valid network types, as "capa_mask" and "capa_val" no longer work correctly (the search must be band-aware now.) The remaining bits in "capa_mask" and "capa_val" are used only for privacy matching so replace those two with a privacy enum as well. Signed-off-by: Dedy Lansky <dlansky@codeaurora.org> [rewrite commit log, tiny fixes] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-02-28cfg80211-wext: return -E2BIG when buffer can't hold full BSS entryJames Minor
When using the wext compatibility code in cfg80211, part of the IEs can be truncated if the passed user buffer is large enough for part of the BSS but not large enough for all of the IEs. This can cause an EAP network to show up as a PSK network. Always return -E2BIG in this case to avoid truncating data. Since this changes the control flow, use an on-stack variable for a small buffer instead of allocating it. Signed-off-by: James Minor <james.minor@ni.com> [rework patch to error out immediately, use _check wrappers] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-02-28nl/mac80211: allow zero plink timeout to disable STA expirationMasashi Honma
Both wpa_supplicant and mac80211 have and inactivity timer. By default wpa_supplicant will be timed out in 5 minutes and mac80211's it is 30 minutes. If wpa_supplicant uses a longer timer than mac80211, it will get unexpected disconnection by mac80211. Using 0xffffffff instead as the configured value could solve this w/o changing the code, but due to integer overflow in the expression used this doesn't work. The expression is: (current jiffies) > (frame Rx jiffies + NL80211_MESHCONF_PLINK_TIMEOUT * 250) On 32bit system, the right side would overflow and be a very small value if NL80211_MESHCONF_PLINK_TIMEOUT is sufficiently large, causing unexpectedly early disconnections. Instead allow disabling the inactivity timer to avoid this situation, by passing the (previously invalid and useless) value 0. Signed-off-by: Masashi Honma <masashi.honma@gmail.com> [reword/rewrap commit log] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-02-28cfg80211-wext: export symbols only when neededJohannes Berg
When a fully converted cfg80211 driver needs cfg80211-wext for userspace API purposes, the symbols need not be exported. When other drivers (orinoco/hermes or ipw2200) are enabled, they do need the symbols exported as they use them directly. Make those drivers select a new CFG80211_WEXT_EXPORT Kconfig symbol (instead of just CFG80211_WEXT) and export the functions only if requested - this saves about 1/2k due to the size of EXPORT_SYMBOL() itself. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-02-24cfg80211: calls nl80211_exit on errorJunjie Mao
nl80211_exit should be called in cfg80211_init if nl80211_init succeeds but regulatory_init or create_singlethread_workqueue fails. Signed-off-by: Junjie Mao <junjie_mao@yeah.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-02-24cfg80211: fix n_reg_rules to match world_regdomJason Abele
There are currently 8 rules in the world_regdom, but only the first 6 are applied due to an incorrect value for n_reg_rules. This causes channels 149-165 and 60GHz to be disabled. Signed-off-by: Jason Abele <jason@aether.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-02-24nl80211: fix memory leak in monitor flags parsingJohannes Berg
If monitor flags parsing results in active monitor but that isn't supported, the already allocated message is leaked. Fix this by moving the allocation after this check. Reported-by: Christian Engelmayer <cengelma@gmx.at> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-02-24nl80211: use loop index as type for net detect frequency resultsSamuel Tan
We currently add nested members of the NL80211_ATTR_SCAN_FREQUENCIES as NLA_U32 attributes of type NL80211_ATTR_WIPHY_FREQ in cfg80211_net_detect_results. However, since there can be an arbitrary number of frequency results, we should use the loop index of the loop used to add the frequency results to NL80211_ATTR_SCAN_FREQUENCIES as the type (i.e. nla_type) for each result attribute, rather than a fixed type. This change is in line with how nested members are added to NL80211_ATTR_SCAN_FREQUENCIES in the functions nl80211_send_wowlan_nd and nl80211_add_scan_req. Signed-off-by: Samuel Tan <samueltan@chromium.org> Signed-off-by: Luciano Coelho <luciano.coelho@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2015-02-04Merge tag 'mac80211-next-for-davem-2015-02-03' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Last round of updates for net-next: * revert a patch that caused a regression with mesh userspace (Bob) * fix a number of suspend/resume related races (from Emmanuel, Luca and myself - we'll look at backporting later) * add software implementations for new ciphers (Jouni) * add a new ACPI ID for Broadcom's rfkill (Mika) * allow using netns FD for wireless (Vadim) * some other cleanups (various) Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: arch/arm/boot/dts/imx6sx-sdb.dts net/sched/cls_bpf.c Two simple sets of overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>