summaryrefslogtreecommitdiff
path: root/net/wireless
AgeCommit message (Collapse)Author
2019-10-30nl80211: fix validation of mesh path nexthopMarkus Theil
Mesh path nexthop should be a ethernet address, but current validation checks against 4 byte integers. Cc: stable@vger.kernel.org Fixes: 2ec600d672e74 ("nl80211/cfg80211: support for mesh, sta dumping") Signed-off-by: Markus Theil <markus.theil@tu-ilmenau.de> Link: https://lore.kernel.org/r/20191029093003.10355-1-markus.theil@tu-ilmenau.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-30nl80211: Disallow setting of HT for channel 14Masashi Honma
This patch disables setting of HT20 and more for channel 14 because the channel is only for IEEE 802.11b. The patch for net/wireless/util.c was unit-tested. The patch for net/wireless/chan.c was tested with iw command. Before this patch. $ sudo iw dev <ifname> set channel 14 HT20 $ After this patch. $ sudo iw dev <ifname> set channel 14 HT20 kernel reports: invalid channel definition command failed: Invalid argument (-22) $ Signed-off-by: Masashi Honma <masashi.honma@gmail.com> Link: https://lore.kernel.org/r/20191021075045.2719-1-masashi.honma@gmail.com [clean up the code, use != instead of equivalent >] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-07mac80211: fix scan when operating on DFS channels in ETSI domainsAaron Komisar
In non-ETSI regulatory domains scan is blocked when operating channel is a DFS channel. For ETSI, however, once DFS channel is marked as available after the CAC, this channel will remain available (for some time) even after leaving this channel. Therefore a scan can be done without any impact on the availability of the DFS channel as no new CAC is required after the scan. Enable scan in mac80211 in these cases. Signed-off-by: Aaron Komisar <aaron.komisar@tandemg.com> Link: https://lore.kernel.org/r/1570024728-17284-1-git-send-email-aaron.komisar@tandemg.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-07cfg80211: fix a bunch of RCU issues in multi-bssid codeSara Sharon
cfg80211_update_notlisted_nontrans() leaves the RCU critical session too early, while still using nontrans_ssid which is RCU protected. In addition, it performs a bunch of RCU pointer update operations such as rcu_access_pointer and rcu_assign_pointer. The caller, cfg80211_inform_bss_frame_data(), also accesses the RCU pointer without holding the lock. Just wrap all of this with bss_lock. Signed-off-by: Sara Sharon <sara.sharon@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20191004123706.15768-3-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-07nl80211: fix memory leak in nl80211_get_ftm_responder_statsNavid Emamdoost
In nl80211_get_ftm_responder_stats, a new skb is created via nlmsg_new named msg. If nl80211hdr_put() fails, then msg should be released. The return statement should be replace by goto to error handling code. Fixes: 81e54d08d9d8 ("cfg80211: support FTM responder configuration/statistics") Signed-off-by: Navid Emamdoost <navid.emamdoost@gmail.com> Link: https://lore.kernel.org/r/20191004194220.19412-1-navid.emamdoost@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-04cfg80211: wext: avoid copying malformed SSIDsWill Deacon
Ensure the SSID element is bounds-checked prior to invoking memcpy() with its length field, when copying to userspace. Cc: <stable@vger.kernel.org> Cc: Kees Cook <keescook@chromium.org> Reported-by: Nicolas Waisman <nico@semmle.com> Signed-off-by: Will Deacon <will@kernel.org> Link: https://lore.kernel.org/r/20191004095132.15777-2-will@kernel.org [adjust commit log a bit] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-01nl80211: fix null pointer dereferenceMiaoqing Pan
If the interface is not in MESH mode, the command 'iw wlanx mpath del' will cause kernel panic. The root cause is null pointer access in mpp_flush_by_proxy(), as the pointer 'sdata->u.mesh.mpp_paths' is NULL for non MESH interface. Unable to handle kernel NULL pointer dereference at virtual address 00000068 [...] PC is at _raw_spin_lock_bh+0x20/0x5c LR is at mesh_path_del+0x1c/0x17c [mac80211] [...] Process iw (pid: 4537, stack limit = 0xd83e0238) [...] [<c021211c>] (_raw_spin_lock_bh) from [<bf8c7648>] (mesh_path_del+0x1c/0x17c [mac80211]) [<bf8c7648>] (mesh_path_del [mac80211]) from [<bf6cdb7c>] (extack_doit+0x20/0x68 [compat]) [<bf6cdb7c>] (extack_doit [compat]) from [<c05c309c>] (genl_rcv_msg+0x274/0x30c) [<c05c309c>] (genl_rcv_msg) from [<c05c25d8>] (netlink_rcv_skb+0x58/0xac) [<c05c25d8>] (netlink_rcv_skb) from [<c05c2e14>] (genl_rcv+0x20/0x34) [<c05c2e14>] (genl_rcv) from [<c05c1f90>] (netlink_unicast+0x11c/0x204) [<c05c1f90>] (netlink_unicast) from [<c05c2420>] (netlink_sendmsg+0x30c/0x370) [<c05c2420>] (netlink_sendmsg) from [<c05886d0>] (sock_sendmsg+0x70/0x84) [<c05886d0>] (sock_sendmsg) from [<c0589f4c>] (___sys_sendmsg.part.3+0x188/0x228) [<c0589f4c>] (___sys_sendmsg.part.3) from [<c058add4>] (__sys_sendmsg+0x4c/0x70) [<c058add4>] (__sys_sendmsg) from [<c0208c80>] (ret_fast_syscall+0x0/0x44) Code: e2822c02 e2822001 e5832004 f590f000 (e1902f9f) ---[ end trace bbd717600f8f884d ]--- Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org> Link: https://lore.kernel.org/r/1569485810-761-1-git-send-email-miaoqing@codeaurora.org [trim useless data from commit message] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-01cfg80211: initialize on-stack chandefsJohannes Berg
In a few places we don't properly initialize on-stack chandefs, resulting in EDMG data to be non-zero, which broke things. Additionally, in a few places we rely on the driver to init the data completely, but perhaps we shouldn't as non-EDMG drivers may not initialize the EDMG data, also initialize it there. Cc: stable@vger.kernel.org Fixes: 2a38075cd0be ("nl80211: Add support for EDMG channels") Reported-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/1569239475-I2dcce394ecf873376c386a78f31c2ec8b538fa25@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-01cfg80211: validate SSID/MBSSID element ordering assumptionJohannes Berg
The code copying the data assumes that the SSID element is before the MBSSID element, but since the data is untrusted from the AP, this cannot be guaranteed. Validate that this is indeed the case and ignore the MBSSID otherwise, to avoid having to deal with both cases for the copy of data that should be between them. Cc: stable@vger.kernel.org Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning") Link: https://lore.kernel.org/r/1569009255-I1673911f5eae02964e21bdc11b2bf58e5e207e59@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-10-01nl80211: validate beacon headJohannes Berg
We currently don't validate the beacon head, i.e. the header, fixed part and elements that are to go in front of the TIM element. This means that the variable elements there can be malformed, e.g. have a length exceeding the buffer size, but most downstream code from this assumes that this has already been checked. Add the necessary checks to the netlink policy. Cc: stable@vger.kernel.org Fixes: ed1b6cc7f80f ("cfg80211/nl80211: add beacon settings") Link: https://lore.kernel.org/r/1569009255-I7ac7fbe9436e9d8733439eab8acbbd35e55c74ef@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-09-11Merge tag 'mac80211-next-for-davem-2019-09-11' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== We have a number of changes, but things are settling down: * a fix in the new 6 GHz channel support * a fix for recent minstrel (rate control) updates for an infinite loop * handle interface type changes better wrt. management frame registrations (for management frames sent to userspace) * add in-BSS RX time to survey information * handle HW rfkill properly if !CONFIG_RFKILL * send deauth on IBSS station expiry, to avoid state mismatches * handle deferred crypto tailroom updates in mac80211 better when device restart happens * fix a spectre-v1 - really a continuation of a previous patch * advertise NL80211_CMD_UPDATE_FT_IES as supported if so * add some missing parsing in VHT extended NSS support * support HE in mac80211_hwsim * let mac80211 drivers determine the max MTU themselves along with the usual cleanups etc. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-11cfg80211: Purge frame registrations on iftype changeDenis Kenzior
Currently frame registrations are not purged, even when changing the interface type. This can lead to potentially weird situations where frames possibly not allowed on a given interface type remain registered due to the type switching happening after registration. The kernel currently relies on userspace apps to actually purge the registrations themselves, this is not something that the kernel should rely on. Add a call to cfg80211_mlme_purge_registrations() to forcefully remove any registrations left over prior to switching the iftype. Cc: stable@vger.kernel.org Signed-off-by: Denis Kenzior <denkenz@gmail.com> Link: https://lore.kernel.org/r/20190828211110.15005-1-denkenz@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-09-11nl80211: Fix possible Spectre-v1 for CQM RSSI thresholdsMasashi Honma
commit 1222a1601488 ("nl80211: Fix possible Spectre-v1 for CQM RSSI thresholds") was incomplete and requires one more fix to prevent accessing to rssi_thresholds[n] because user can control rssi_thresholds[i] values to make i reach to n. For example, rssi_thresholds = {-400, -300, -200, -100} when last is -34. Cc: stable@vger.kernel.org Fixes: 1222a1601488 ("nl80211: Fix possible Spectre-v1 for CQM RSSI thresholds") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Masashi Honma <masashi.honma@gmail.com> Link: https://lore.kernel.org/r/20190908005653.17433-1-masashi.honma@gmail.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-09-11cfg80211: Do not compare with boolean in nl80211_common_reg_change_eventzhong jiang
With the help of boolinit.cocci, we use !nl80211_reg_change_event_fill instead of (nl80211_reg_change_event_fill == false). Meanwhile, Clean up the code. Signed-off-by: zhong jiang <zhongjiang@huawei.com> Link: https://lore.kernel.org/r/1567657537-65472-1-git-send-email-zhongjiang@huawei.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-09-11cfg80211: always shut down on HW rfkillJohannes Berg
When the RFKILL subsystem isn't available, then rfkill_blocked() always returns false. In the case of hardware rfkill this will be wrong though, as if the hardware reported being killed then it cannot operate any longer. Since we only ever call the rfkill_sync work in this case, just rename it to rfkill_block and always pass "true" for the blocked parameter, rather than passing rfkill_blocked(). We rely on the underlying driver to still reject any new attempt to bring up the device by itself. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Link: https://lore.kernel.org/r/20190830112451.21655-2-luca@coelho.fi Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-09-11cfg80211: fix boundary value in ieee80211_frequency_to_channel()Arend van Spriel
The boundary value used for the 6G band was incorrect as it would result in invalid 6G channel number for certain frequencies. Reported-by: Amar Singhal <asinghal@codeaurora.org> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1567510772-24263-1-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-30cfg80211: add local BSS receive time to survey informationFelix Fietkau
This is useful for checking how much airtime is being used up by other transmissions on the channel, e.g. by calculating (time_rx - time_bss_rx) or (time_busy - time_bss_rx - time_tx) Signed-off-by: Felix Fietkau <nbd@nbd.name> Link: https://lore.kernel.org/r/20190828102042.58016-1-nbd@nbd.name Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Minor conflict in r8169, bug fix had two versions in net and net-next, take the net-next hunks. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-08-22nl80211: add NL80211_CMD_UPDATE_FT_IES to supported commandsMatthew Wang
Add NL80211_CMD_UPDATE_FT_IES to supported commands. In mac80211 drivers, this can be implemented via existing NL80211_CMD_AUTHENTICATE and NL80211_ATTR_IE, but non-mac80211 drivers have a separate command for this. A driver supports FT if it either is mac80211 or supports this command. Signed-off-by: Matthew Wang <matthewmwang@chromium.org> Reviewed-by: Brian Norris <briannorris@chromium.org> Link: https://lore.kernel.org/r/20190822174806.2954-1-matthewmwang@chromium.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21nl80211: Add support for EDMG channelsAlexei Avshalom Lazar
802.11ay specification defines Enhanced Directional Multi-Gigabit (EDMG) STA and AP which allow channel bonding of 2 channels and more. Introduce new NL attributes that are needed for enabling and configuring EDMG support. Two new attributes are used by kernel to publish driver's EDMG capabilities to the userspace: NL80211_BAND_ATTR_EDMG_CHANNELS - bitmap field that indicates the 2.16 GHz channel(s) that are supported by the driver. When this attribute is not set it means driver does not support EDMG. NL80211_BAND_ATTR_EDMG_BW_CONFIG - represent the channel bandwidth configurations supported by the driver. Additional two new attributes are used by the userspace for connect command and for AP configuration: NL80211_ATTR_WIPHY_EDMG_CHANNELS NL80211_ATTR_WIPHY_EDMG_BW_CONFIG New rate info flag - RATE_INFO_FLAGS_EDMG, can be reported from driver and used for bitrate calculation that will take into account EDMG according to the 802.11ay specification. Signed-off-by: Alexei Avshalom Lazar <ailizaro@codeaurora.org> Link: https://lore.kernel.org/r/1566138918-3823-2-git-send-email-ailizaro@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: Support assoc-at timer in sta-infoBen Greear
Report timestamp of when sta became associated. This is the boottime clock, units are nano-seconds. Signed-off-by: Ben Greear <greearb@candelatech.com> Link: https://lore.kernel.org/r/20190809180001.26393-1-greearb@candelatech.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: apply same mandatory rate flags for 5GHz and 6GHzArend van Spriel
For the new 6GHz band the same rules apply for mandatory rates so add it to set_mandatory_flags_band() function. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-9-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: ibss: use 11a mandatory rates for 6GHz band operationArend van Spriel
The default mandatory rates, ie. when not specified by user-space, is determined by the band. Select 11a rateset for 6GHz band. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-8-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: use same IR permissive rules for 6GHz bandArend van Spriel
The function cfg80211_ir_permissive_chan() is applicable for 6GHz band as well so make sure it is handled. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-7-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: add 6GHz in code handling array with NUM_NL80211_BANDS entriesArend van Spriel
In nl80211.c there is a policy for all bands in NUM_NL80211_BANDS and in trace.h there is a callback trace for multicast rates which is per band in NUM_NL80211_BANDS. Both need to be extended for the new NL80211_BAND_6GHZ. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-6-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: extend ieee80211_operating_class_to_band() for 6GHzArend van Spriel
Add 6GHz operating class range as defined in 802.11ax D4.1 Annex E. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-5-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: util: add 6GHz channel to freq conversion and vice versaArend van Spriel
Extend the functions ieee80211_channel_to_frequency() and ieee80211_frequency_to_channel() to support 6GHz band according specification in 802.11ax D4.1 27.3.22.2. Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-4-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: add 6GHz UNII band definitionsArend van Spriel
For the new 6GHz there are new UNII band definitions as listed in the FCC notice [1]. [1] https://docs.fcc.gov/public/attachments/FCC-18-147A1_Rcd.pdf Reviewed-by: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com> Reviewed-by: Leon Zegers <leon.zegers@broadcom.com> Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com> Link: https://lore.kernel.org/r/1564745465-21234-3-git-send-email-arend.vanspriel@broadcom.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21Revert "cfg80211: fix processing world regdomain when non modular"Hodaszi, Robert
This reverts commit 96cce12ff6e0 ("cfg80211: fix processing world regdomain when non modular"). Re-triggering a reg_process_hint with the last request on all events, can make the regulatory domain fail in case of multiple WiFi modules. On slower boards (espacially with mdev), enumeration of the WiFi modules can end up in an intersected regulatory domain, and user cannot set it with 'iw reg set' anymore. This is happening, because: - 1st module enumerates, queues up a regulatory request - request gets processed by __reg_process_hint_driver(): - checks if previous was set by CORE -> yes - checks if regulator domain changed -> yes, from '00' to e.g. 'US' -> sends request to the 'crda' - 2nd module enumerates, queues up a regulator request (which triggers the reg_todo() work) - reg_todo() -> reg_process_pending_hints() sees, that the last request is not processed yet, so it tries to process it again. __reg_process_hint driver() will run again, and: - checks if the last request's initiator was the core -> no, it was the driver (1st WiFi module) - checks, if the previous initiator was the driver -> yes - checks if the regulator domain changed -> yes, it was '00' (set by core, and crda call did not return yet), and should be changed to 'US' ------> __reg_process_hint_driver calls an intersect Besides, the reg_process_hint call with the last request is meaningless since the crda call has a timeout work. If that timeout expires, the first module's request will lost. Cc: stable@vger.kernel.org Fixes: 96cce12ff6e0 ("cfg80211: fix processing world regdomain when non modular") Signed-off-by: Robert Hodaszi <robert.hodaszi@digi.com> Link: https://lore.kernel.org/r/20190614131600.GA13897@a1-hr Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-21cfg80211: Fix Extended Key ID key install checksAlexander Wetzel
Fix two shortcomings in the Extended Key ID API: 1) Allow the userspace to install pairwise keys using keyid 1 without NL80211_KEY_NO_TX set. This allows the userspace to install and activate pairwise keys with keyid 1 in the same way as for keyid 0, simplifying the API usage for e.g. FILS and FT key installs. 2) IEEE 802.11 - 2016 restricts Extended Key ID usage to CCMP/GCMP ciphers in IEEE 802.11 - 2016 "9.4.2.25.4 RSN capabilities". Enforce that when installing a key. Cc: stable@vger.kernel.org # 5.2 Fixes: 6cdd3979a2bd ("nl80211/cfg80211: Extended Key ID support") Signed-off-by: Alexander Wetzel <alexander@wetzel-home.de> Link: https://lore.kernel.org/r/20190805123400.51567-1-alexander@wetzel-home.de Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller
Just minor overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-07-31nl80211: add strict start typeJohannes Berg
Add a strict start type so all new attributes starting from NL80211_ATTR_HE_OBSS_PD are validated strictly. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-31cfg80211: add support for parsing OBBS_PD attributesJohn Crispin
Add the data structure, policy and parsing code allowing userland to send the OBSS PD information into the kernel. Signed-off-by: John Crispin <john@phrozen.org> Link: https://lore.kernel.org/r/20190730163701.18836-2-john@phrozen.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-31cfg80211: use parallel_ops for genlJohannes Berg
Over time, we really need to get rid of all of our global locking. One of the things needed is to use parallel_ops. This isn't really the most important (RTNL is much more important) but OTOH we just keep adding uses of genl_family_attrbuf() now. Use .parallel_ops to disallow this. Reviewed-By: Denis Kenzior <denkenz@gmail.com> Link: https://lore.kernel.org/r/20190729143109.18683-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-29cfg80211: fix dfs channels remain DFS_AVAILABLE after ch_switchMichael Vassernis
Depending on the regulatory domain, leaving a DFS channel requires a new CAC to be performed when returning back to that channel. If needed, update dfs states after a driver channel switch. Signed-off-by: Michael Vassernis <michael.vassernis@tandemg.com> Link: https://lore.kernel.org/r/20190729060024.5660-1-michael.vassernis@tandemg.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-29cfg80211: fix duplicated scan entries after channel switchSergey Matyukevich
When associated BSS completes channel switch procedure, its channel record needs to be updated. The existing mac80211 solution was extended to cfg80211 in commit 5dc8cdce1d72 ("mac80211/cfg80211: update bss channel on channel switch"). However that solution still appears to be incomplete as it may lead to duplicated scan entries for associated BSS after channel switch. The root cause of the problem is as follows. Each BSS entry is included into the following data structures: - bss list rdev->bss_list - bss search tree rdev->bss_tree Updating BSS channel record without rebuilding bss_tree may break tree search since cmp_bss considers all of the following: channel, bssid, ssid. When BSS channel is updated, but its location in bss_tree is not updated, then subsequent search operations may fail to locate this BSS since they will be traversing bss_tree in wrong direction. As a result, for scan performed after associated BSS channel switch, cfg80211_bss_update may add the second entry for the same BSS to both bss_list and bss_tree, rather then update the existing one. To summarize, if BSS channel needs to be updated, then bss_tree should be rebuilt in order to put updated BSS entry into a proper location. This commit suggests the following straightforward solution: - if new entry has been already created for BSS after channel switch, then use its IEs to update known BSS entry and then remove new entry completely - use rb_erase/rb_insert_bss reinstall updated BSS in bss_tree - for nontransmit BSS entry, the whole transmit BSS hierarchy is updated Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20190726163922.27509-3-sergey.matyukevich.os@quantenna.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-29cfg80211: refactor cfg80211_bss_updateSergey Matyukevich
This patch implements minor refactoring for cfg80211_bss_update function. Code path for updating known BSS is extracted into dedicated cfg80211_update_known_bss function. Signed-off-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20190726163922.27509-2-sergey.matyukevich.os@quantenna.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-26nl80211: Include wiphy address setup in NEW_WIPHYDenis Kenzior
Include wiphy address setup in wiphy dumps and new wiphy events. The wiphy permanent address is exposed as ATTR_MAC. If addr_mask is setup, then it is included as ATTR_MAC_MASK attribute. If multiple addresses are available, then their are exposed in a nested ATTR_MAC_ADDRS array. This information is already exposed via sysfs, but it makes sense to include it in the wiphy dump as well. Signed-off-by: Denis Kenzior <denkenz@gmail.com> Link: https://lore.kernel.org/r/20190722113312.14031-3-denkenz@gmail.com [use just nla_nest_start(), this is new functionality] Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-26{nl,mac}80211: fix interface combinations on crypto controlled devicesManikanta Pubbisetty
Commit 33d915d9e8ce ("{nl,mac}80211: allow 4addr AP operation on crypto controlled devices") has introduced a change which allows 4addr operation on crypto controlled devices (ex: ath10k). This change has inadvertently impacted the interface combinations logic on such devices. General rule is that software interfaces like AP/VLAN should not be listed under supported interface combinations and should not be considered during validation of these combinations; because of the aforementioned change, AP/VLAN interfaces(if present) will be checked against interfaces supported by the device and blocks valid interface combinations. Consider a case where an AP and AP/VLAN are up and running; when a second AP device is brought up on the same physical device, this AP will be checked against the AP/VLAN interface (which will not be part of supported interface combinations of the device) and blocks second AP to come up. Add a new API cfg80211_iftype_allowed() to fix the problem, this API works for all devices with/without SW crypto control. Signed-off-by: Manikanta Pubbisetty <mpubbise@codeaurora.org> Fixes: 33d915d9e8ce ("{nl,mac}80211: allow 4addr AP operation on crypto controlled devices") Link: https://lore.kernel.org/r/1563779690-9716-1-git-send-email-mpubbise@codeaurora.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-26cfg80211: give all multi-BSSID BSS entries the same timestampJohannes Berg
If we just read jiffies over and over again, a non-transmitting entry may have a newer timestamp than the transmitting one, leading to possible confusion on expiry. Give them all the same timestamp when creating them. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20190703133823.10530-3-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-26cfg80211: don't parse MBSSID if transmitting BSS isn't createdJohannes Berg
Don't parse the multi-BSSID structures if we couldn't even create their transmitting BSS, this would confuse all of our tracking. This also means that non_tx_data->tx_bss will never be NULL, so we can clean up a little bit. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20190703133823.10530-2-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-26cfg80211: clean up cfg80211_inform_single_bss_frame_data()Johannes Berg
cfg80211_inform_single_bss_frame_data() doesn't need the non_tx_data data argument since it's always NULL. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com> Link: https://lore.kernel.org/r/20190703133823.10530-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-26cfg80211: no need to check return value of debugfs_create functionsGreg Kroah-Hartman
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20190703070142.GA29993@kroah.com Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-26lib80211: use crypto API ccm(aes) transform for CCMP processingArd Biesheuvel
Instead of open coding the CCM aead mode in the driver, and invoking the AES block cipher block by block, use a ccm(aes) aead transform which already encapsulates this functionality. This is a cleaner use of the crypto API, and permits optimized implementations to be used, which are typically much faster and deal more efficiently with the SIMD register file, which usually needs to be preserved/restored in order to use special AES instructions. Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Link: https://lore.kernel.org/r/20190617091901.7063-1-ard.biesheuvel@linaro.org Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2019-07-15Merge tag 'pci-v5.3-changes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration changes: - Evaluate PCI Boot Configuration _DSM to learn if firmware wants us to preserve its resource assignments (Benjamin Herrenschmidt) - Simplify resource distribution (Nicholas Johnson) - Decode 32 GT/s link speed (Gustavo Pimentel) Virtualization: - Fix incorrect caching of VF config space size (Alex Williamson) - Fix VF driver probing sysfs knobs (Alex Williamson) Peer-to-peer DMA: - Fix dma_virt_ops check (Logan Gunthorpe) Altera host bridge driver: - Allow building as module (Ley Foon Tan) Armada 8K host bridge driver: - add PHYs support (Miquel Raynal) DesignWare host bridge driver: - Export APIs to support removable loadable module (Vidya Sagar) - Enable Relaxed Ordering erratum workaround only on Tegra20 & Tegra30 (Vidya Sagar) Hyper-V host bridge driver: - Fix use-after-free in eject (Dexuan Cui) Mobiveil host bridge driver: - Clean up and fix many issues, including non-identify mapped windows, 64-bit windows, multi-MSI, class code, INTx clearing (Hou Zhiqiang) Qualcomm host bridge driver: - Use clk bulk API for 2.4.0 controllers (Bjorn Andersson) - Add QCS404 support (Bjorn Andersson) - Assert PERST for at least 100ms (Niklas Cassel) R-Car host bridge driver: - Add r8a774a1 DT support (Biju Das) Tegra host bridge driver: - Add support for Gen2, opportunistic UpdateFC and ACK (PCIe protocol details) AER, GPIO-based PERST# (Manikanta Maddireddy) - Fix many issues, including power-on failure cases, interrupt masking in suspend, UPHY settings, AFI dynamic clock gating, pending DLL transactions (Manikanta Maddireddy) Xilinx host bridge driver: - Fix NWL Multi-MSI programming (Bharat Kumar Gogada) Endpoint support: - Fix 64bit BAR support (Alan Mikhak) - Fix pcitest build issues (Alan Mikhak, Andy Shevchenko) Bug fixes: - Fix NVIDIA GPU multi-function power dependencies (Abhishek Sahu) - Fix NVIDIA GPU HDA enablement issue (Lukas Wunner) - Ignore lockdep for sysfs "remove" (Marek Vasut) Misc: - Convert docs to reST (Changbin Du, Mauro Carvalho Chehab)" * tag 'pci-v5.3-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (107 commits) PCI: Enable NVIDIA HDA controllers tools: PCI: Fix installation when `make tools/pci_install` PCI: dwc: pci-dra7xx: Fix compilation when !CONFIG_GPIOLIB PCI: Fix typos and whitespace errors PCI: mobiveil: Fix INTx interrupt clearing in mobiveil_pcie_isr() PCI: mobiveil: Fix infinite-loop in the INTx handling function PCI: mobiveil: Move PCIe PIO enablement out of inbound window routine PCI: mobiveil: Add upper 32-bit PCI base address setup in inbound window PCI: mobiveil: Add upper 32-bit CPU base address setup in outbound window PCI: mobiveil: Mask out hardcoded bits in inbound/outbound windows setup PCI: mobiveil: Clear the control fields before updating it PCI: mobiveil: Add configured inbound windows counter PCI: mobiveil: Fix the valid check for inbound and outbound windows PCI: mobiveil: Clean-up program_{ib/ob}_windows() PCI: mobiveil: Remove an unnecessary return value check PCI: mobiveil: Fix error return values PCI: mobiveil: Refactor the MEM/IO outbound window initialization PCI: mobiveil: Make some register updates more readable PCI: mobiveil: Reformat the code for readability dt-bindings: PCI: mobiveil: Change gpio_slave and apb_csr to optional ...
2019-07-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Some highlights from this development cycle: 1) Big refactoring of ipv6 route and neigh handling to support nexthop objects configurable as units from userspace. From David Ahern. 2) Convert explored_states in BPF verifier into a hash table, significantly decreased state held for programs with bpf2bpf calls, from Alexei Starovoitov. 3) Implement bpf_send_signal() helper, from Yonghong Song. 4) Various classifier enhancements to mvpp2 driver, from Maxime Chevallier. 5) Add aRFS support to hns3 driver, from Jian Shen. 6) Fix use after free in inet frags by allocating fqdirs dynamically and reworking how rhashtable dismantle occurs, from Eric Dumazet. 7) Add act_ctinfo packet classifier action, from Kevin Darbyshire-Bryant. 8) Add TFO key backup infrastructure, from Jason Baron. 9) Remove several old and unused ISDN drivers, from Arnd Bergmann. 10) Add devlink notifications for flash update status to mlxsw driver, from Jiri Pirko. 11) Lots of kTLS offload infrastructure fixes, from Jakub Kicinski. 12) Add support for mv88e6250 DSA chips, from Rasmus Villemoes. 13) Various enhancements to ipv6 flow label handling, from Eric Dumazet and Willem de Bruijn. 14) Support TLS offload in nfp driver, from Jakub Kicinski, Dirk van der Merwe, and others. 15) Various improvements to axienet driver including converting it to phylink, from Robert Hancock. 16) Add PTP support to sja1105 DSA driver, from Vladimir Oltean. 17) Add mqprio qdisc offload support to dpaa2-eth, from Ioana Radulescu. 18) Add devlink health reporting to mlx5, from Moshe Shemesh. 19) Convert stmmac over to phylink, from Jose Abreu. 20) Add PTP PHC (Physical Hardware Clock) support to mlxsw, from Shalom Toledo. 21) Add nftables SYNPROXY support, from Fernando Fernandez Mancera. 22) Convert tcp_fastopen over to use SipHash, from Ard Biesheuvel. 23) Track spill/fill of constants in BPF verifier, from Alexei Starovoitov. 24) Support bounded loops in BPF, from Alexei Starovoitov. 25) Various page_pool API fixes and improvements, from Jesper Dangaard Brouer. 26) Just like ipv4, support ref-countless ipv6 route handling. From Wei Wang. 27) Support VLAN offloading in aquantia driver, from Igor Russkikh. 28) Add AF_XDP zero-copy support to mlx5, from Maxim Mikityanskiy. 29) Add flower GRE encap/decap support to nfp driver, from Pieter Jansen van Vuuren. 30) Protect against stack overflow when using act_mirred, from John Hurley. 31) Allow devmap map lookups from eBPF, from Toke Høiland-Jørgensen. 32) Use page_pool API in netsec driver, Ilias Apalodimas. 33) Add Google gve network driver, from Catherine Sullivan. 34) More indirect call avoidance, from Paolo Abeni. 35) Add kTLS TX HW offload support to mlx5, from Tariq Toukan. 36) Add XDP_REDIRECT support to bnxt_en, from Andy Gospodarek. 37) Add MPLS manipulation actions to TC, from John Hurley. 38) Add sending a packet to connection tracking from TC actions, and then allow flower classifier matching on conntrack state. From Paul Blakey. 39) Netfilter hw offload support, from Pablo Neira Ayuso" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2080 commits) net/mlx5e: Return in default case statement in tx_post_resync_params mlx5: Return -EINVAL when WARN_ON_ONCE triggers in mlx5e_tls_resync(). net: dsa: add support for BRIDGE_MROUTER attribute pkt_sched: Include const.h net: netsec: remove static declaration for netsec_set_tx_de() net: netsec: remove superfluous if statement netfilter: nf_tables: add hardware offload support net: flow_offload: rename tc_cls_flower_offload to flow_cls_offload net: flow_offload: add flow_block_cb_is_busy() and use it net: sched: remove tcf block API drivers: net: use flow block API net: sched: use flow block API net: flow_offload: add flow_block_cb_{priv, incref, decref}() net: flow_offload: add list handling functions net: flow_offload: add flow_block_cb_alloc() and flow_block_cb_free() net: flow_offload: rename TCF_BLOCK_BINDER_TYPE_* to FLOW_BLOCK_BINDER_TYPE_* net: flow_offload: rename TC_BLOCK_{UN}BIND to FLOW_BLOCK_{UN}BIND net: flow_offload: add flow_block_cb_setup_simple() net: hisilicon: Add an tx_desc to adapt HI13X1_GMAC net: hisilicon: Add an rx_desc to adapt HI13X1_GMAC ...
2019-07-10Revert "Merge tag 'keys-acl-20190703' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs" This reverts merge 0f75ef6a9cff49ff612f7ce0578bced9d0b38325 (and thus effectively commits 7a1ade847596 ("keys: Provide KEYCTL_GRANT_PERMISSION") 2e12256b9a76 ("keys: Replace uid/gid/perm permissions checking with an ACL") that the merge brought in). It turns out that it breaks booting with an encrypted volume, and Eric biggers reports that it also breaks the fscrypt tests [1] and loading of in-kernel X.509 certificates [2]. The root cause of all the breakage is likely the same, but David Howells is off email so rather than try to work it out it's getting reverted in order to not impact the rest of the merge window. [1] https://lore.kernel.org/lkml/20190710011559.GA7973@sol.localdomain/ [2] https://lore.kernel.org/lkml/20190710013225.GB7973@sol.localdomain/ Link: https://lore.kernel.org/lkml/CAHk-=wjxoeMJfeBahnWH=9zShKp2bsVy527vo3_y8HfOdhwAAw@mail.gmail.com/ Reported-by: Eric Biggers <ebiggers@kernel.org> Cc: David Howells <dhowells@redhat.com> Cc: James Morris <jmorris@namei.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-07-08Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Here is the crypto update for 5.3: API: - Test shash interface directly in testmgr - cra_driver_name is now mandatory Algorithms: - Replace arc4 crypto_cipher with library helper - Implement 5 way interleave for ECB, CBC and CTR on arm64 - Add xxhash - Add continuous self-test on noise source to drbg - Update jitter RNG Drivers: - Add support for SHA204A random number generator - Add support for 7211 in iproc-rng200 - Fix fuzz test failures in inside-secure - Fix fuzz test failures in talitos - Fix fuzz test failures in qat" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (143 commits) crypto: stm32/hash - remove interruptible condition for dma crypto: stm32/hash - Fix hmac issue more than 256 bytes crypto: stm32/crc32 - rename driver file crypto: amcc - remove memset after dma_alloc_coherent crypto: ccp - Switch to SPDX license identifiers crypto: ccp - Validate the the error value used to index error messages crypto: doc - Fix formatting of new crypto engine content crypto: doc - Add parameter documentation crypto: arm64/aes-ce - implement 5 way interleave for ECB, CBC and CTR crypto: arm64/aes-ce - add 5 way interleave routines crypto: talitos - drop icv_ool crypto: talitos - fix hash on SEC1. crypto: talitos - move struct talitos_edesc into talitos.h lib/scatterlist: Fix mapping iterator when sg->offset is greater than PAGE_SIZE crypto/NX: Set receive window credits to max number of CRBs in RxFIFO crypto: asymmetric_keys - select CRYPTO_HASH where needed crypto: serpent - mark __serpent_setkey_sbox noinline crypto: testmgr - dynamically allocate crypto_shash crypto: testmgr - dynamically allocate testvec_config crypto: talitos - eliminate unneeded 'done' functions at build time ...
2019-07-08Merge tag 'keys-acl-20190703' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull keyring ACL support from David Howells: "This changes the permissions model used by keys and keyrings to be based on an internal ACL by the following means: - Replace the permissions mask internally with an ACL that contains a list of ACEs, each with a specific subject with a permissions mask. Potted default ACLs are available for new keys and keyrings. ACE subjects can be macroised to indicate the UID and GID specified on the key (which remain). Future commits will be able to add additional subject types, such as specific UIDs or domain tags/namespaces. Also split a number of permissions to give finer control. Examples include splitting the revocation permit from the change-attributes permit, thereby allowing someone to be granted permission to revoke a key without allowing them to change the owner; also the ability to join a keyring is split from the ability to link to it, thereby stopping a process accessing a keyring by joining it and thus acquiring use of possessor permits. - Provide a keyctl to allow the granting or denial of one or more permits to a specific subject. Direct access to the ACL is not granted, and the ACL cannot be viewed" * tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: keys: Provide KEYCTL_GRANT_PERMISSION keys: Replace uid/gid/perm permissions checking with an ACL
2019-06-27keys: Replace uid/gid/perm permissions checking with an ACLDavid Howells
Replace the uid/gid/perm permissions checking on a key with an ACL to allow the SETATTR and SEARCH permissions to be split. This will also allow a greater range of subjects to represented. ============ WHY DO THIS? ============ The problem is that SETATTR and SEARCH cover a slew of actions, not all of which should be grouped together. For SETATTR, this includes actions that are about controlling access to a key: (1) Changing a key's ownership. (2) Changing a key's security information. (3) Setting a keyring's restriction. And actions that are about managing a key's lifetime: (4) Setting an expiry time. (5) Revoking a key. and (proposed) managing a key as part of a cache: (6) Invalidating a key. Managing a key's lifetime doesn't really have anything to do with controlling access to that key. Expiry time is awkward since it's more about the lifetime of the content and so, in some ways goes better with WRITE permission. It can, however, be set unconditionally by a process with an appropriate authorisation token for instantiating a key, and can also be set by the key type driver when a key is instantiated, so lumping it with the access-controlling actions is probably okay. As for SEARCH permission, that currently covers: (1) Finding keys in a keyring tree during a search. (2) Permitting keyrings to be joined. (3) Invalidation. But these don't really belong together either, since these actions really need to be controlled separately. Finally, there are number of special cases to do with granting the administrator special rights to invalidate or clear keys that I would like to handle with the ACL rather than key flags and special checks. =============== WHAT IS CHANGED =============== The SETATTR permission is split to create two new permissions: (1) SET_SECURITY - which allows the key's owner, group and ACL to be changed and a restriction to be placed on a keyring. (2) REVOKE - which allows a key to be revoked. The SEARCH permission is split to create: (1) SEARCH - which allows a keyring to be search and a key to be found. (2) JOIN - which allows a keyring to be joined as a session keyring. (3) INVAL - which allows a key to be invalidated. The WRITE permission is also split to create: (1) WRITE - which allows a key's content to be altered and links to be added, removed and replaced in a keyring. (2) CLEAR - which allows a keyring to be cleared completely. This is split out to make it possible to give just this to an administrator. (3) REVOKE - see above. Keys acquire ACLs which consist of a series of ACEs, and all that apply are unioned together. An ACE specifies a subject, such as: (*) Possessor - permitted to anyone who 'possesses' a key (*) Owner - permitted to the key owner (*) Group - permitted to the key group (*) Everyone - permitted to everyone Note that 'Other' has been replaced with 'Everyone' on the assumption that you wouldn't grant a permit to 'Other' that you wouldn't also grant to everyone else. Further subjects may be made available by later patches. The ACE also specifies a permissions mask. The set of permissions is now: VIEW Can view the key metadata READ Can read the key content WRITE Can update/modify the key content SEARCH Can find the key by searching/requesting LINK Can make a link to the key SET_SECURITY Can change owner, ACL, expiry INVAL Can invalidate REVOKE Can revoke JOIN Can join this keyring CLEAR Can clear this keyring The KEYCTL_SETPERM function is then deprecated. The KEYCTL_SET_TIMEOUT function then is permitted if SET_SECURITY is set, or if the caller has a valid instantiation auth token. The KEYCTL_INVALIDATE function then requires INVAL. The KEYCTL_REVOKE function then requires REVOKE. The KEYCTL_JOIN_SESSION_KEYRING function then requires JOIN to join an existing keyring. The JOIN permission is enabled by default for session keyrings and manually created keyrings only. ====================== BACKWARD COMPATIBILITY ====================== To maintain backward compatibility, KEYCTL_SETPERM will translate the permissions mask it is given into a new ACL for a key - unless KEYCTL_SET_ACL has been called on that key, in which case an error will be returned. It will convert possessor, owner, group and other permissions into separate ACEs, if each portion of the mask is non-zero. SETATTR permission turns on all of INVAL, REVOKE and SET_SECURITY. WRITE permission turns on WRITE, REVOKE and, if a keyring, CLEAR. JOIN is turned on if a keyring is being altered. The KEYCTL_DESCRIBE function translates the ACL back into a permissions mask to return depending on possessor, owner, group and everyone ACEs. It will make the following mappings: (1) INVAL, JOIN -> SEARCH (2) SET_SECURITY -> SETATTR (3) REVOKE -> WRITE if SETATTR isn't already set (4) CLEAR -> WRITE Note that the value subsequently returned by KEYCTL_DESCRIBE may not match the value set with KEYCTL_SETATTR. ======= TESTING ======= This passes the keyutils testsuite for all but a couple of tests: (1) tests/keyctl/dh_compute/badargs: The first wrong-key-type test now returns EOPNOTSUPP rather than ENOKEY as READ permission isn't removed if the type doesn't have ->read(). You still can't actually read the key. (2) tests/keyctl/permitting/valid: The view-other-permissions test doesn't work as Other has been replaced with Everyone in the ACL. Signed-off-by: David Howells <dhowells@redhat.com>