summaryrefslogtreecommitdiff
path: root/net/xfrm/xfrm_state.c
AgeCommit message (Collapse)Author
2019-11-07xfrm: Fix memleak on xfrm state destroySteffen Klassert
We leak the page that we use to create skb page fragments when destroying the xfrm_state. Fix this by dropping a page reference if a page was assigned to the xfrm_state. Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible") Reported-by: JD <jdtxs00@gmail.com> Reported-by: Paul Wouters <paul@nohats.ca> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-07-01xfrm: remove get_mtu indirection from xfrm_typeFlorian Westphal
esp4_get_mtu and esp6_get_mtu are exactly the same, the only difference is a single sizeof() (ipv4 vs. ipv6 header). Merge both into xfrm_state_mtu() and remove the indirection. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-06-06xfrm: remove type and offload_type map from xfrm_state_afinfoFlorian Westphal
Only a handful of xfrm_types exist, no need to have 512 pointers for them. Reduces size of afinfo struct from 4k to 120 bytes on 64bit platforms. Also, the unregister function doesn't need to return an error, no single caller does anything useful with it. Just place a WARN_ON() where needed instead. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-06-06xfrm: remove state and template sort indirections from xfrm_state_afinfoFlorian Westphal
No module dependency, placing this in xfrm_state.c avoids need for an indirection. This also removes the state spinlock -- I don't see why we would need to hold it during sorting. This in turn allows to remove the 'net' argument passed to xfrm_tmpl_sort. Last, remove the EXPORT_SYMBOL, there are no modular callers. For the CONFIG_IPV6=m case, vmlinux size increase is about 300 byte. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-06-05xfrm: remove init_flags indirection from xfrm_state_afinfoFlorian Westphal
There is only one implementation of this function; just call it directly. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-06-05xfrm: remove init_temprop indirection from xfrm_state_afinfoFlorian Westphal
same as previous patch: just place this in the caller, no need to have an indirection for a structure initialization. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-06-05xfrm: remove init_tempsel indirection from xfrm_state_afinfoFlorian Westphal
Simple initialization, handle it in the caller. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-05-21treewide: Add SPDX license identifier for missed filesThomas Gleixner
Add SPDX license identifiers to all files which: - Have no license information of any form - Have EXPORT_.*_SYMBOL_GPL inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Support AES128-CCM ciphers in kTLS, from Vakul Garg. 2) Add fib_sync_mem to control the amount of dirty memory we allow to queue up between synchronize RCU calls, from David Ahern. 3) Make flow classifier more lockless, from Vlad Buslov. 4) Add PHY downshift support to aquantia driver, from Heiner Kallweit. 5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces contention on SLAB spinlocks in heavy RPC workloads. 6) Partial GSO offload support in XFRM, from Boris Pismenny. 7) Add fast link down support to ethtool, from Heiner Kallweit. 8) Use siphash for IP ID generator, from Eric Dumazet. 9) Pull nexthops even further out from ipv4/ipv6 routes and FIB entries, from David Ahern. 10) Move skb->xmit_more into a per-cpu variable, from Florian Westphal. 11) Improve eBPF verifier speed and increase maximum program size, from Alexei Starovoitov. 12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit spinlocks. From Neil Brown. 13) Allow tunneling with GUE encap in ipvs, from Jacky Hu. 14) Improve link partner cap detection in generic PHY code, from Heiner Kallweit. 15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan Maguire. 16) Remove SKB list implementation assumptions in SCTP, your's truly. 17) Various cleanups, optimizations, and simplifications in r8169 driver. From Heiner Kallweit. 18) Add memory accounting on TX and RX path of SCTP, from Xin Long. 19) Switch PHY drivers over to use dynamic featue detection, from Heiner Kallweit. 20) Support flow steering without masking in dpaa2-eth, from Ioana Ciocoi. 21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri Pirko. 22) Increase the strict parsing of current and future netlink attributes, also export such policies to userspace. From Johannes Berg. 23) Allow DSA tag drivers to be modular, from Andrew Lunn. 24) Remove legacy DSA probing support, also from Andrew Lunn. 25) Allow ll_temac driver to be used on non-x86 platforms, from Esben Haabendal. 26) Add a generic tracepoint for TX queue timeouts to ease debugging, from Cong Wang. 27) More indirect call optimizations, from Paolo Abeni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits) cxgb4: Fix error path in cxgb4_init_module net: phy: improve pause mode reporting in phy_print_status dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings net: macb: Change interrupt and napi enable order in open net: ll_temac: Improve error message on error IRQ net/sched: remove block pointer from common offload structure net: ethernet: support of_get_mac_address new ERR_PTR error net: usb: smsc: fix warning reported by kbuild test robot staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check net: dsa: support of_get_mac_address new ERR_PTR error net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats vrf: sit mtu should not be updated when vrf netdev is the link net: dsa: Fix error cleanup path in dsa_init_module l2tp: Fix possible NULL pointer dereference taprio: add null check on sched_nest to avoid potential null pointer dereference net: mvpp2: cls: fix less than zero check on a u32 variable net_sched: sch_fq: handle non connected flows net_sched: sch_fq: do not assume EDT packets are ordered net: hns3: use devm_kcalloc when allocating desc_cb net: hns3: some cleanup for struct hns3_enet_ring ...
2019-05-06Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Ingo Molnar: "This cycle had the following changes: - Timer tracing improvements (Anna-Maria Gleixner) - Continued tasklet reduction work: remove the hrtimer_tasklet (Thomas Gleixner) - Fix CPU hotplug remove race in the tick-broadcast mask handling code (Thomas Gleixner) - Force upper bound for setting CLOCK_REALTIME, to fix ABI inconsistencies with handling values that are close to the maximum supported and the vagueness of when uptime related wraparound might occur. Make the consistent maximum the year 2232 across all relevant ABIs and APIs. (Thomas Gleixner) - various cleanups and smaller fixes" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick: Fix typos in comments tick/broadcast: Fix warning about undefined tick_broadcast_oneshot_offline() timekeeping: Force upper bound for setting CLOCK_REALTIME timer/trace: Improve timer tracing timer/trace: Replace deprecated vsprintf pointer extension %pf by %ps timer: Move trace point to get proper index tick/sched: Update tick_sched struct documentation tick: Remove outgoing CPU from broadcast masks timekeeping: Consistently use unsigned int for seqcount snapshot softirq: Remove tasklet_hrtimer xfrm: Replace hrtimer tasklet with softirq hrtimer mac80211_hwsim: Replace hrtimer tasklet with softirq hrtimer
2019-05-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Three trivial overlapping conflicts. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-23xfrm: remove unneeded export_symbolsFlorian Westphal
None of them have any external callers, make them static. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: store xfrm_mode directly, not its addressFlorian Westphal
This structure is now only 4 bytes, so its more efficient to cache a copy rather than its address. No significant size difference in allmodconfig vmlinux. With non-modular kernel that has all XFRM options enabled, this series reduces vmlinux image size by ~11kb. All xfrm_mode indirections are gone and all modes are built-in. before (ipsec-next master): text data bss dec filename 21071494 7233140 11104324 39408958 vmlinux.master after this series: 21066448 7226772 11104324 39397544 vmlinux.patched With allmodconfig kernel, the size increase is only 362 bytes, even all the xfrm config options removed in this series are modular. before: text data bss dec filename 15731286 6936912 4046908 26715106 vmlinux.master after this series: 15731492 6937068 4046908 26715468 vmlinux Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: make xfrm modes builtinFlorian Westphal
after previous changes, xfrm_mode contains no function pointers anymore and all modules defining such struct contain no code except an init/exit functions to register the xfrm_mode struct with the xfrm core. Just place the xfrm modes core and remove the modules, the run-time xfrm_mode register/unregister functionality is removed. Before: text data bss dec filename 7523 200 2364 10087 net/xfrm/xfrm_input.o 40003 628 440 41071 net/xfrm/xfrm_state.o 15730338 6937080 4046908 26714326 vmlinux 7389 200 2364 9953 net/xfrm/xfrm_input.o 40574 656 440 41670 net/xfrm/xfrm_state.o 15730084 6937068 4046908 26714060 vmlinux The xfrm*_mode_{transport,tunnel,beet} modules are gone. v2: replace CONFIG_INET6_XFRM_MODE_* IS_ENABLED guards with CONFIG_IPV6 ones rather than removing them. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: remove afinfo pointer from xfrm_modeFlorian Westphal
Adds an EXPORT_SYMBOL for afinfo_get_rcu, as it will now be called from ipv6 in case of CONFIG_IPV6=m. This change has virtually no effect on vmlinux size, but it reduces afinfo size and allows followup patch to make xfrm modes const. v2: mark if (afinfo) tests as likely (Sabrina) re-fetch afinfo according to inner_mode in xfrm_prepare_input(). Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-04-08xfrm: place af number into xfrm_mode structFlorian Westphal
This will be useful to know if we're supposed to decode ipv4 or ipv6. While at it, make the unregister function return void, all module_exit functions did just BUG(); there is never a point in doing error checks if there is no way to handle such error. Signed-off-by: Florian Westphal <fw@strlen.de> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-03-26xfrm: clean up xfrm protocol checksCong Wang
In commit 6a53b7593233 ("xfrm: check id proto in validate_tmpl()") I introduced a check for xfrm protocol, but according to Herbert IPSEC_PROTO_ANY should only be used as a wildcard for lookup, so it should be removed from validate_tmpl(). And, IPSEC_PROTO_ANY is expected to only match 3 IPSec-specific protocols, this is why xfrm_state_flush() could still miss IPPROTO_ROUTING, which leads that those entries are left in net->xfrm.state_all before exit net. Fix this by replacing IPSEC_PROTO_ANY with zero. This patch also extracts the check from validate_tmpl() to xfrm_id_proto_valid() and uses it in parse_ipsecrequest(). With this, no other protocols should be added into xfrm. Fixes: 6a53b7593233 ("xfrm: check id proto in validate_tmpl()") Reported-by: syzbot+0bf0519d6e0de15914fe@syzkaller.appspotmail.com Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2019-03-22xfrm: Replace hrtimer tasklet with softirq hrtimerThomas Gleixner
Switch the timer to HRTIMER_MODE_SOFT, which executed the timer callback in softirq context and remove the hrtimer_tasklet. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David S. Miller <davem@davemloft.net> Cc: netdev@vger.kernel.org Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Link: https://lkml.kernel.org/r/20190301224821.29843-3-bigeasy@linutronix.de
2019-02-05xfrm: destroy xfrm_state synchronously on net exit pathCong Wang
xfrm_state_put() moves struct xfrm_state to the GC list and schedules the GC work to clean it up. On net exit call path, xfrm_state_flush() is called to clean up and xfrm_flush_gc() is called to wait for the GC work to complete before exit. However, this doesn't work because one of the ->destructor(), ipcomp_destroy(), schedules the same GC work again inside the GC work. It is hard to wait for such a nested async callback. This is also why syzbot still reports the following warning: WARNING: CPU: 1 PID: 33 at net/ipv6/xfrm6_tunnel.c:351 xfrm6_tunnel_net_exit+0x2cb/0x500 net/ipv6/xfrm6_tunnel.c:351 ... ops_exit_list.isra.0+0xb0/0x160 net/core/net_namespace.c:153 cleanup_net+0x51d/0xb10 net/core/net_namespace.c:551 process_one_work+0xd0c/0x1ce0 kernel/workqueue.c:2153 worker_thread+0x143/0x14a0 kernel/workqueue.c:2296 kthread+0x357/0x430 kernel/kthread.c:246 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 In fact, it is perfectly fine to bypass GC and destroy xfrm_state synchronously on net exit call path, because it is in process context and doesn't need a work struct to do any blocking work. This patch introduces xfrm_state_put_sync() which simply bypasses GC, and lets its callers to decide whether to use this synchronous version. On net exit path, xfrm_state_fini() and xfrm6_tunnel_net_exit() use it. And, as ipcomp_destroy() itself is blocking, it can use xfrm_state_put_sync() directly too. Also rename xfrm_state_gc_destroy() to ___xfrm_state_destroy() to reflect this change. Fixes: b48c05ab5d32 ("xfrm: Fix warning in xfrm6_tunnel_net_exit.") Reported-and-tested-by: syzbot+e9aebef558e3ed673934@syzkaller.appspotmail.com Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-12-18Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2018-12-18 1) Fix error return code in xfrm_output_one() when no dst_entry is attached to the skb. From Wei Yongjun. 2) The xfrm state hash bucket count reported to userspace is off by one. Fix from Benjamin Poirier. 3) Fix NULL pointer dereference in xfrm_input when skb_dst_force clears the dst_entry. 4) Fix freeing of xfrm states on acquire. We use a dedicated slab cache for the xfrm states now, so free it properly with kmem_cache_free. From Mathias Krause. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-23xfrm_user: fix freeing of xfrm states on acquireMathias Krause
Commit 565f0fa902b6 ("xfrm: use a dedicated slab cache for struct xfrm_state") moved xfrm state objects to use their own slab cache. However, it missed to adapt xfrm_user to use this new cache when freeing xfrm states. Fix this by introducing and make use of a new helper for freeing xfrm_state objects. Fixes: 565f0fa902b6 ("xfrm: use a dedicated slab cache for struct xfrm_state") Reported-by: Pan Bian <bianpan2016@163.com> Cc: <stable@vger.kernel.org> # v4.18+ Signed-off-by: Mathias Krause <minipli@googlemail.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-11-06xfrm: Fix bucket count reported to userspaceBenjamin Poirier
sadhcnt is reported by `ip -s xfrm state count` as "buckets count", not the hash mask. Fixes: 28d8909bc790 ("[XFRM]: Export SAD info.") Signed-off-by: Benjamin Poirier <bpoirier@suse.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-11-01compat: Cleanup in_compat_syscall() callersDmitry Safonov
Now that in_compat_syscall() is consistent on all architectures and does not longer report true on native i686, the workarounds (ifdeffery and helpers) can be removed. Signed-off-by: Dmitry Safonov <dima@arista.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Andy Lutomirsky <luto@kernel.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: John Stultz <john.stultz@linaro.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-efi@vger.kernel.org Cc: netdev@vger.kernel.org Link: https://lkml.kernel.org/r/20181012134253.23266-3-dima@arista.com
2018-07-20xfrm: Allow xfrmi if_id to be updated by UPDSANathan Harold
Allow attaching an SA to an xfrm interface id after the creation of the SA, so that tasks such as keying which must be done as the SA is created, can remain separate from the decision on how to route traffic from an SA. This permits SA creation to be decomposed in to three separate steps: 1) allocation of a SPI 2) algorithm and key negotiation 3) insertion into the data path Signed-off-by: Nathan Harold <nharold@google.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-07-20xfrm: Remove xfrmi interface ID from flowiBenedict Wong
In order to remove performance impact of having the extra u32 in every single flowi, this change removes the flowi_xfrm struct, prefering to take the if_id as a method parameter where needed. In the inbound direction, if_id is only needed during the __xfrm_check_policy() function, and the if_id can be determined at that point based on the skb. As such, xfrmi_decode_session() is only called with the skb in __xfrm_check_policy(). In the outbound direction, the only place where if_id is needed is the xfrm_lookup() call in xfrmi_xmit2(). With this change, the if_id is directly passed into the xfrm_lookup_with_ifid() call. All existing callers can still call xfrm_lookup(), which uses a default if_id of 0. This change does not change any behavior of XFRMIs except for improving overall system performance via flowi size reduction. This change has been tested against the Android Kernel Networking Tests: https://android.googlesource.com/kernel/tests/+/master/net/test Signed-off-by: Benedict Wong <benedictwong@google.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-07-11xfrm: use time64_t for in-kernel timestampsArnd Bergmann
The lifetime managment uses '__u64' timestamps on the user space interface, but 'unsigned long' for reading the current time in the kernel with get_seconds(). While this is probably safe beyond y2038, it will still overflow in 2106, and the get_seconds() call is deprecated because fo that. This changes the xfrm time handling to use time64_t consistently, along with reading the time using the safer ktime_get_real_seconds(). It still suffers from problems that can happen from a concurrent settimeofday() call or (to a lesser degree) a leap second update, but since the time stamps are part of the user API, there is nothing we can do to prevent that. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-07-01xfrm: Allow Set Mark to be Updated Using UPDSANathan Harold
Allow UPDSA to change "set mark" to permit policy separation of packet routing decisions from SA keying in systems that use mark-based routing. The set mark, used as a routing and firewall mark for outbound packets, is made update-able which allows routing decisions to be handled independently of keying/SA creation. To maintain consistency with other optional attributes, the set mark is only updated if sent with a non-zero value. The per-SA lock and the xfrm_state_lock are taken in that order to avoid a deadlock with xfrm_timer_handler(), which also takes the locks in that order. Signed-off-by: Nathan Harold <nharold@google.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-06-25xfrm: policy: remove pcpu policy cacheFlorian Westphal
Kristian Evensen says: In a project I am involved in, we are running ipsec (Strongswan) on different mt7621-based routers. Each router is configured as an initiator and has around ~30 tunnels to different responders (running on misc. devices). Before the flow cache was removed (kernel 4.9), we got a combined throughput of around 70Mbit/s for all tunnels on one router. However, we recently switched to kernel 4.14 (4.14.48), and the total throughput is somewhere around 57Mbit/s (best-case). I.e., a drop of around 20%. Reverting the flow cache removal restores, as expected, performance levels to that of kernel 4.9. When pcpu xdst exists, it has to be validated first before it can be used. A negative hit thus increases cost vs. no-cache. As number of tunnels increases, hit rate decreases so this pcpu caching isn't a viable strategy. Furthermore, the xdst cache also needs to run with BH off, so when removing this the bh disable/enable pairs can be removed too. Kristian tested a 4.14.y backport of this change and reported increased performance: In our tests, the throughput reduction has been reduced from around -20% to -5%. We also see that the overall throughput is independent of the number of tunnels, while before the throughput was reduced as the number of tunnels increased. Reported-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-06-23xfrm: Add a new lookup key to match xfrm interfaces.Steffen Klassert
This patch adds the xfrm interface id as a lookup key for xfrm states and policies. With this we can assign states and policies to virtual xfrm interfaces. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Acked-by: Benedict Wong <benedictwong@google.com> Tested-by: Benedict Wong <benedictwong@google.com> Tested-by: Antony Antony <antony@phenome.org> Reviewed-by: Eyal Birger <eyal.birger@gmail.com>
2018-05-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The bpf syscall and selftests conflicts were trivial overlapping changes. The r8169 change involved moving the added mdelay from 'net' into a different function. A TLS close bug fix overlapped with the splitting of the TLS state into separate TX and RX parts. I just expanded the tests in the bug fix from "ctx->conf == X" into "ctx->tx_conf == X && ctx->rx_conf == X". Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-04xfrm: use a dedicated slab cache for struct xfrm_stateMathias Krause
struct xfrm_state is rather large (768 bytes here) and therefore wastes quite a lot of memory as it falls into the kmalloc-1024 slab cache, leaving 256 bytes of unused memory per XFRM state object -- a net waste of 25%. Using a dedicated slab cache for struct xfrm_state reduces the level of internal fragmentation to a minimum. On my configuration SLUB chooses to create a slab cache covering 4 pages holding 21 objects, resulting in an average memory waste of ~13 bytes per object -- a net waste of only 1.6%. In my tests this led to memory savings of roughly 2.3MB for 10k XFRM states. Signed-off-by: Mathias Krause <minipli@googlemail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-04-16xfrm: Fix warning in xfrm6_tunnel_net_exit.Steffen Klassert
We need to make sure that all states are really deleted before we check that the state lists are empty. Otherwise we trigger a warning. Fixes: baeb0dbbb5659 ("xfrm6_tunnel: exit_net cleanup check added") Reported-and-tested-by:syzbot+777bf170a89e7b326405@syzkaller.appspotmail.com Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-02-02xfrm: Refuse to insert 32 bit userspace socket policies on 64 bit systemsSteffen Klassert
We don't have a compat layer for xfrm, so userspace and kernel structures have different sizes in this case. This results in a broken configuration, so refuse to configure socket policies when trying to insert from 32 bit userspace as we do it already with policies inserted via netlink. Reported-and-tested-by: syzbot+e1a1577ca8bcb47b769a@syzkaller.appspotmail.com Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-01-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-23xfrm: fix boolean assignment in xfrm_get_type_offloadGustavo A. R. Silva
Assign true or false to boolean variables instead of an integer value. This issue was detected with the help of Coccinelle. Fixes: ffdb5211da1c ("xfrm: Auto-load xfrm offload modules") Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-01-18xfrm: Add SA to hardware at the end of xfrm_state_construct()Yossi Kuperman
Current code configures the hardware with a new SA before the state has been fully initialized. During this time interval, an incoming ESP packet can cause a crash due to a NULL dereference. More specifically, xfrm_input() considers the packet as valid, and yet, anti-replay mechanism is not initialized. Move hardware configuration to the end of xfrm_state_construct(), and mark the state as valid once the SA is fully initialized. Fixes: d77e38e612a0 ("xfrm: Add an IPsec hardware offloading API") Signed-off-by: Aviad Yehezkel <aviadye@mellnaox.com> Signed-off-by: Aviv Heller <avivh@mellanox.com> Signed-off-by: Yossi Kuperman <yossiku@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-01-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Overlapping changes all over. The mini-qdisc bits were a little bit tricky, however. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-31xfrm: fix rcu usage in xfrm_get_type_offloadSabrina Dubroca
request_module can sleep, thus we cannot hold rcu_read_lock() while calling it. The function also jumps back and takes rcu_read_lock() again (in xfrm_state_get_afinfo()), resulting in an imbalance. This codepath is triggered whenever a new offloaded state is created. Fixes: ffdb5211da1c ("xfrm: Auto-load xfrm offload modules") Reported-by: syzbot+ca425f44816d749e8eb49755567a75ee48cf4a30@syzkaller.appspotmail.com Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-12-30xfrm: Forbid state updates from changing encap typeHerbert Xu
Currently we allow state updates to competely replace the contents of x->encap. This is bad because on the user side ESP only sets up header lengths depending on encap_type once when the state is first created. This could result in the header lengths getting out of sync with the actual state configuration. In practice key managers will never do a state update to change the encapsulation type. Only the port numbers need to be changed as the peer NAT entry is updated. Therefore this patch adds a check in xfrm_state_update to forbid any changes to the encap_type. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-12-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
net/ipv6/ip6_gre.c is a case of parallel adds. include/trace/events/tcp.h is a little bit more tricky. The removal of in-trace-macro ifdefs in 'net' paralleled with moving show_tcp_state_name and friends over to include/trace/events/sock.h in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-27Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2017-12-22 1) Check for valid id proto in validate_tmpl(), otherwise we may trigger a warning in xfrm_state_fini(). From Cong Wang. 2) Fix a typo on XFRMA_OUTPUT_MARK policy attribute. From Michal Kubecek. 3) Verify the state is valid when encap_type < 0, otherwise we may crash on IPsec GRO . From Aviv Heller. 4) Fix stack-out-of-bounds read on socket policy lookup. We access the flowi of the wrong address family in the IPv4 mapped IPv6 case, fix this by catching address family missmatches before we do the lookup. 5) fix xfrm_do_migrate() with AEAD to copy the geniv field too. Otherwise the state is not fully initialized and migration fails. From Antony Antony. 6) Fix stack-out-of-bounds with misconfigured transport mode policies. Our policy template validation is not strict enough. It is possible to configure policies with transport mode template where the address family of the template does not match the selectors address family. Fix this by refusing such a configuration, address family can not change on transport mode. 7) Fix a policy reference leak when reusing pcpu xdst entry. From Florian Westphal. 8) Reinject transport-mode packets through tasklet, otherwise it is possible to reate a recursion loop. From Herbert Xu. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2017-12-08xfrm: fix xfrm_do_migrate() with AEAD e.g(AES-GCM)Antony Antony
copy geniv when cloning the xfrm state. x->geniv was not copied to the new state and migration would fail. xfrm_do_migrate .. xfrm_state_clone() .. .. esp_init_aead() crypto_alloc_aead() crypto_alloc_tfm() crypto_find_alg() return EAGAIN and failed Signed-off-by: Antony Antony <antony@phenome.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-11-30net: xfrm: allow clearing socket xfrm policies.Lorenzo Colitti
Currently it is possible to add or update socket policies, but not clear them. Therefore, once a socket policy has been applied, the socket cannot be used for unencrypted traffic. This patch allows (privileged) users to clear socket policies by passing in a NULL pointer and zero length argument to the {IP,IPV6}_{IPSEC,XFRM}_POLICY setsockopts. This results in both the incoming and outgoing policies being cleared. The simple approach taken in this patch cannot clear socket policies in only one direction. If desired this could be added in the future, for example by continuing to pass in a length of zero (which currently is guaranteed to return EMSGSIZE) and making the policy be a pointer to an integer that contains one of the XFRM_POLICY_{IN,OUT} enum values. An alternative would have been to interpret the length as a signed integer and use XFRM_POLICY_IN (i.e., 0) to clear the input policy and -XFRM_POLICY_OUT (i.e., -1) to clear the output policy. Tested: https://android-review.googlesource.com/539816 Signed-off-by: Lorenzo Colitti <lorenzo@google.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-11-21treewide: setup_timer() -> timer_setup()Kees Cook
This converts all remaining cases of the old setup_timer() API into using timer_setup(), where the callback argument is the structure already holding the struct timer_list. These should have no behavioral changes, since they just change which pointer is passed into the callback with the same available pointers after conversion. It handles the following examples, in addition to some other variations. Casting from unsigned long: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... setup_timer(&ptr->my_timer, my_callback, ptr); and forced object casts: void my_callback(struct something *ptr) { ... } ... setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr); become: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... timer_setup(&ptr->my_timer, my_callback, 0); Direct function assignments: void my_callback(unsigned long data) { struct something *ptr = (struct something *)data; ... } ... ptr->my_timer.function = my_callback; have a temporary cast added, along with converting the args: void my_callback(struct timer_list *t) { struct something *ptr = from_timer(ptr, t, my_timer); ... } ... ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback; And finally, callbacks without a data assignment: void my_callback(unsigned long data) { ... } ... setup_timer(&ptr->my_timer, my_callback, 0); have their argument renamed to verify they're unused during conversion: void my_callback(struct timer_list *unused) { ... } ... timer_setup(&ptr->my_timer, my_callback, 0); The conversion is done with the following Coccinelle script: spatch --very-quiet --all-includes --include-headers \ -I ./arch/x86/include -I ./arch/x86/include/generated \ -I ./include -I ./arch/x86/include/uapi \ -I ./arch/x86/include/generated/uapi -I ./include/uapi \ -I ./include/generated/uapi --include ./include/linux/kconfig.h \ --dir . \ --cocci-file ~/src/data/timer_setup.cocci @fix_address_of@ expression e; @@ setup_timer( -&(e) +&e , ...) // Update any raw setup_timer() usages that have a NULL callback, but // would otherwise match change_timer_function_usage, since the latter // will update all function assignments done in the face of a NULL // function initialization in setup_timer(). @change_timer_function_usage_NULL@ expression _E; identifier _timer; type _cast_data; @@ ( -setup_timer(&_E->_timer, NULL, _E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E->_timer, NULL, (_cast_data)_E); +timer_setup(&_E->_timer, NULL, 0); | -setup_timer(&_E._timer, NULL, &_E); +timer_setup(&_E._timer, NULL, 0); | -setup_timer(&_E._timer, NULL, (_cast_data)&_E); +timer_setup(&_E._timer, NULL, 0); ) @change_timer_function_usage@ expression _E; identifier _timer; struct timer_list _stl; identifier _callback; type _cast_func, _cast_data; @@ ( -setup_timer(&_E->_timer, _callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, &_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, _E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, &_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E); +timer_setup(&_E._timer, _callback, 0); | _E->_timer@_stl.function = _callback; | _E->_timer@_stl.function = &_callback; | _E->_timer@_stl.function = (_cast_func)_callback; | _E->_timer@_stl.function = (_cast_func)&_callback; | _E._timer@_stl.function = _callback; | _E._timer@_stl.function = &_callback; | _E._timer@_stl.function = (_cast_func)_callback; | _E._timer@_stl.function = (_cast_func)&_callback; ) // callback(unsigned long arg) @change_callback_handle_cast depends on change_timer_function_usage@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; identifier _handle; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { ( ... when != _origarg _handletype *_handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(_handletype *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg | ... when != _origarg _handletype *_handle; ... when != _handle _handle = -(void *)_origarg; +from_timer(_handle, t, _timer); ... when != _origarg ) } // callback(unsigned long arg) without existing variable @change_callback_handle_cast_no_arg depends on change_timer_function_usage && !change_callback_handle_cast@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _origtype; identifier _origarg; type _handletype; @@ void _callback( -_origtype _origarg +struct timer_list *t ) { + _handletype *_origarg = from_timer(_origarg, t, _timer); + ... when != _origarg - (_handletype *)_origarg + _origarg ... when != _origarg } // Avoid already converted callbacks. @match_callback_converted depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier t; @@ void _callback(struct timer_list *t) { ... } // callback(struct something *handle) @change_callback_handle_arg depends on change_timer_function_usage && !match_callback_converted && !change_callback_handle_cast && !change_callback_handle_cast_no_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; @@ void _callback( -_handletype *_handle +struct timer_list *t ) { + _handletype *_handle = from_timer(_handle, t, _timer); ... } // If change_callback_handle_arg ran on an empty function, remove // the added handler. @unchange_callback_handle_arg depends on change_timer_function_usage && change_callback_handle_arg@ identifier change_timer_function_usage._callback; identifier change_timer_function_usage._timer; type _handletype; identifier _handle; identifier t; @@ void _callback(struct timer_list *t) { - _handletype *_handle = from_timer(_handle, t, _timer); } // We only want to refactor the setup_timer() data argument if we've found // the matching callback. This undoes changes in change_timer_function_usage. @unchange_timer_function_usage depends on change_timer_function_usage && !change_callback_handle_cast && !change_callback_handle_cast_no_arg && !change_callback_handle_arg@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type change_timer_function_usage._cast_data; @@ ( -timer_setup(&_E->_timer, _callback, 0); +setup_timer(&_E->_timer, _callback, (_cast_data)_E); | -timer_setup(&_E._timer, _callback, 0); +setup_timer(&_E._timer, _callback, (_cast_data)&_E); ) // If we fixed a callback from a .function assignment, fix the // assignment cast now. @change_timer_function_assignment depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression change_timer_function_usage._E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_func; typedef TIMER_FUNC_TYPE; @@ ( _E->_timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -&_callback +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)_callback; +(TIMER_FUNC_TYPE)_callback ; | _E->_timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -&_callback; +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)_callback +(TIMER_FUNC_TYPE)_callback ; | _E._timer.function = -(_cast_func)&_callback +(TIMER_FUNC_TYPE)_callback ; ) // Sometimes timer functions are called directly. Replace matched args. @change_timer_function_calls depends on change_timer_function_usage && (change_callback_handle_cast || change_callback_handle_cast_no_arg || change_callback_handle_arg)@ expression _E; identifier change_timer_function_usage._timer; identifier change_timer_function_usage._callback; type _cast_data; @@ _callback( ( -(_cast_data)_E +&_E->_timer | -(_cast_data)&_E +&_E._timer | -_E +&_E->_timer ) ) // If a timer has been configured without a data argument, it can be // converted without regard to the callback argument, since it is unused. @match_timer_function_unused_data@ expression _E; identifier _timer; identifier _callback; @@ ( -setup_timer(&_E->_timer, _callback, 0); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0L); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E->_timer, _callback, 0UL); +timer_setup(&_E->_timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0L); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_E._timer, _callback, 0UL); +timer_setup(&_E._timer, _callback, 0); | -setup_timer(&_timer, _callback, 0); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0L); +timer_setup(&_timer, _callback, 0); | -setup_timer(&_timer, _callback, 0UL); +timer_setup(&_timer, _callback, 0); | -setup_timer(_timer, _callback, 0); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0L); +timer_setup(_timer, _callback, 0); | -setup_timer(_timer, _callback, 0UL); +timer_setup(_timer, _callback, 0); ) @change_callback_unused_data depends on match_timer_function_unused_data@ identifier match_timer_function_unused_data._callback; type _origtype; identifier _origarg; @@ void _callback( -_origtype _origarg +struct timer_list *unused ) { ... when != _origarg } Signed-off-by: Kees Cook <keescook@chromium.org>
2017-10-26xfrm: Clear sk_dst_cache when applying per-socket policy.Jonathan Basseri
If a socket has a valid dst cache, then xfrm_lookup_route will get skipped. However, the cache is not invalidated when applying policy to a socket (i.e. IPV6_XFRM_POLICY). The result is that new policies are sometimes ignored on those sockets. (Note: This was broken for IPv4 and IPv6 at different times.) This can be demonstrated like so, 1. Create UDP socket. 2. connect() the socket. 3. Apply an outbound XFRM policy to the socket. (setsockopt) 4. send() data on the socket. Packets will continue to be sent in the clear instead of matching an xfrm or returning a no-match error (EAGAIN). This affects calls to send() and not sendto(). Invalidating the sk_dst_cache is necessary to correctly apply xfrm policies. Since we do this in xfrm_user_policy(), the sk_lock was already acquired in either do_ip_setsockopt() or do_ipv6_setsockopt(), and we may call __sk_dst_reset(). Performance impact should be negligible, since this code is only called when changing xfrm policy, and only affects the socket in question. Fixes: 00bc0ef5880d ("ipv6: Skip XFRM lookup if dst_entry in socket cache is valid") Tested: https://android-review.googlesource.com/517555 Tested: https://android-review.googlesource.com/418659 Signed-off-by: Jonathan Basseri <misterikkit@google.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-09-28xfrm: don't call xfrm_policy_cache_flush under xfrm_state_lockArtem Savkov
I might be wrong but it doesn't look like xfrm_state_lock is required for xfrm_policy_cache_flush and calling it under this lock triggers both "sleeping function called from invalid context" and "possible circular locking dependency detected" warnings on flush. Fixes: ec30d78c14a8 xfrm: add xdst pcpu cache Signed-off-by: Artem Savkov <asavkov@redhat.com> Acked-by: Florian Westphal <fw@strlen.de> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-09-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Three cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-08-02xfrm: fix null pointer dereference on state and tmpl sortKoichiro Den
Creating sub policy that matches the same outer flow as main policy does leads to a null pointer dereference if the outer mode's family is ipv4. For userspace compatibility, this patch just eliminates the crash i.e., does not introduce any new sorting rule, which would fruitlessly affect all but the aforementioned case. Signed-off-by: Koichiro Den <den@klaipeden.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-08-02xfrm: Auto-load xfrm offload modulesIlan Tayari
IPSec crypto offload depends on the protocol-specific offload module (such as esp_offload.ko). When the user installs an SA with crypto-offload, load the offload module automatically, in the same way that the protocol module is loaded (such as esp.ko) Signed-off-by: Ilan Tayari <ilant@mellanox.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-07-18xfrm: add xdst pcpu cacheFlorian Westphal
retain last used xfrm_dst in a pcpu cache. On next request, reuse this dst if the policies are the same. The cache will not help with strict RR workloads as there is no hit. The cache packet-path part is reasonably small, the notifier part is needed so we do not add long hangs when a device is dismantled but some pcpu xdst still holds a reference, there are also calls to the flush operation when userspace deletes SAs so modules can be removed (there is no hit. We need to run the dst_release on the correct cpu to avoid races with packet path. This is done by adding a work_struct for each cpu and then doing the actual test/release on each affected cpu via schedule_work_on(). Test results using 4 network namespaces and null encryption: ns1 ns2 -> ns3 -> ns4 netperf -> xfrm/null enc -> xfrm/null dec -> netserver what TCP_STREAM UDP_STREAM UDP_RR Flow cache: 14644.61 294.35 327231.64 No flow cache: 14349.81 242.64 202301.72 Pcpu cache: 14629.70 292.21 205595.22 UDP tests used 64byte packets, tests ran for one minute each, value is average over ten iterations. 'Flow cache' is 'net-next', 'No flow cache' is net-next plus this series but without this patch. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>