summaryrefslogtreecommitdiff
path: root/net/xfrm
AgeCommit message (Collapse)Author
2015-04-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The dwmac-socfpga.c conflict was a case of a bug fix overlapping changes in net-next to handle an error pointer differently. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-09Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2015-04-09 1) Prohibit the use/abuse of the xfrm netlink interface on 32/64 bit compatibility tasks. We need a full compat layer before we can allow this. From Fan Du. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-07netfilter: Pass socket pointer down through okfn().David Miller
On the output paths in particular, we have to sometimes deal with two socket contexts. First, and usually skb->sk, is the local socket that generated the frame. And second, is potentially the socket used to control a tunneling socket, such as one the encapsulates using UDP. We do not want to disassociate skb->sk when encapsulating in order to fix this, because that would break socket memory accounting. The most extreme case where this can cause huge problems is an AF_PACKET socket transmitting over a vxlan device. We hit code paths doing checks that assume they are dealing with an ipv4 socket, but are actually operating upon the AF_PACKET one. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-07xfrm: fix xfrm_input/xfrm_tunnel_check oopsAlexey Dobriyan
https://bugzilla.kernel.org/show_bug.cgi?id=95211 Commit 70be6c91c86596ad2b60c73587880b47df170a41 ("xfrm: Add xfrm_tunnel_skb_cb to the skb common buffer") added check which dereferences ->outer_mode too early but larval SAs don't have this pointer set (yet). So check for tunnel stuff later. Mike Noordermeer reported this bug and patiently applied all the debugging. Technically this is remote-oops-in-interrupt-context type of thing. BUG: unable to handle kernel NULL pointer dereference at 0000000000000034 IP: [<ffffffff8150dca2>] xfrm_input+0x3c2/0x5a0 ... [<ffffffff81500fc6>] ? xfrm4_esp_rcv+0x36/0x70 [<ffffffff814acc9a>] ? ip_local_deliver_finish+0x9a/0x200 [<ffffffff81471b83>] ? __netif_receive_skb_core+0x6f3/0x8f0 ... RIP [<ffffffff8150dca2>] xfrm_input+0x3c2/0x5a0 Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-03-31xfrm: simplify xfrm_address_t useJiri Benc
In many places, the a6 field is typecasted to struct in6_addr. As the fields are in union anyway, just add in6_addr type to the union and get rid of the typecasting. Modifying the uapi header is okay, the union has still the same size. Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-16Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2015-03-16 1) Fix the network header offset in _decode_session6 when multiple IPv6 extension headers are present. From Hajime Tazaki. 2) Fix an interfamily tunnel crash. We set outer mode protocol too early and may dispatch to the wrong address family. Move the setting of the outer mode protocol behind the last accessing of the inner mode to fix the crash. 3) Most callers of xfrm_lookup() expect that dst_orig is released on error. But xfrm_lookup_route() may need dst_orig to handle certain error cases. So introduce a flag that tells what should be done in case of error. From Huaibin Wang. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-03xfrm: Do not parse 32bits compiled xfrm netlink msg on 64bits hostFan Du
structure like xfrm_usersa_info or xfrm_userpolicy_info has different sizeof when compiled as 32bits and 64bits due to not appending pack attribute in their definition. This will result in broken SA and SP information when user trying to configure them through netlink interface. Inform user land about this situation instead of keeping silent, the upper test scripts would behave accordingly. Signed-off-by: Fan Du <fan.du@intel.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-02-12xfrm: release dst_orig in case of error in xfrm_lookup()huaibin Wang
dst_orig should be released on error. Function like __xfrm_route_forward() expects that behavior. Since a recent commit, xfrm_lookup() may also be called by xfrm_lookup_route(), which expects the opposite. Let's introduce a new flag (XFRM_LOOKUP_KEEP_DST_REF) to tell what should be done in case of error. Fixes: f92ee61982d("xfrm: Generate blackhole routes only from route lookup functions") Signed-off-by: huaibin Wang <huaibin.wang@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2015-01-18netlink: make nlmsg_end() and genlmsg_end() voidJohannes Berg
Contrary to common expectations for an "int" return, these functions return only a positive value -- if used correctly they cannot even return 0 because the message header will necessarily be in the skb. This makes the very common pattern of if (genlmsg_end(...) < 0) { ... } be a whole bunch of dead code. Many places also simply do return nlmsg_end(...); and the caller is expected to deal with it. This also commonly (at least for me) causes errors, because it is very common to write if (my_function(...)) /* error condition */ and if my_function() does "return nlmsg_end()" this is of course wrong. Additionally, there's not a single place in the kernel that actually needs the message length returned, and if anyone needs it later then it'll be very easy to just use skb->len there. Remove this, and make the functions void. This removes a bunch of dead code as described above. The patch adds lines because I did - return nlmsg_end(...); + nlmsg_end(...); + return 0; I could have preserved all the function's return values by returning skb->len, but instead I've audited all the places calling the affected functions and found that none cared. A few places actually compared the return value with <= 0 in dump functionality, but that could just be changed to < 0 with no change in behaviour, so I opted for the more efficient version. One instance of the error I've made numerous times now is also present in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't check for <0 or <=0 and thus broke out of the loop every single time. I've preserved this since it will (I think) have caused the messages to userspace to be formatted differently with just a single message for every SKB returned to userspace. It's possible that this isn't needed for the tools that actually use this, but I don't even know what they are so couldn't test that changing this behaviour would be acceptable. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-12net: xfrm: xfrm_algo: Remove unused functionRickard Strandqvist
Remove the function aead_entries() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-08Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2014-12-03 1) Fix a set but not used warning. From Fabian Frederick. 2) Currently we make sequence number values available to userspace only if we use ESN. Make the sequence number values also available for non ESN states. From Zhi Ding. 3) Remove socket policy hashing. We don't need it because socket policies are always looked up via a linked list. From Herbert Xu. 4) After removing socket policy hashing, we can use __xfrm_policy_link in xfrm_policy_insert. From Herbert Xu. 5) Add a lookup method for vti6 tunnels with wildcard endpoints. I forgot this when I initially implemented vti6. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-13xfrm: Use __xfrm_policy_link in xfrm_policy_insertHerbert Xu
For a long time we couldn't actually use __xfrm_policy_link in xfrm_policy_insert because the latter wanted to do hashing at a specific position. Now that __xfrm_policy_link no longer does hashing it can now be safely used in xfrm_policy_insert to kill some duplicate code, finally reuniting general policies with socket policies. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-11-13xfrm: Do not hash socket policiesHerbert Xu
Back in 2003 when I added policy expiration, I half-heartedly did a clean-up and renamed xfrm_sk_policy_link/xfrm_sk_policy_unlink to __xfrm_policy_link/__xfrm_policy_unlink, because the latter could be reused for all policies. I never actually got around to using __xfrm_policy_link for non-socket policies. Later on hashing was added to all xfrm policies, including socket policies. In fact, we don't need hashing on socket policies at all since they're always looked up via a linked list. This patch restores xfrm_sk_policy_link/xfrm_sk_policy_unlink as wrappers around __xfrm_policy_link/__xfrm_policy_unlink so that it's obvious we're dealing with socket policies. This patch also removes hashing from __xfrm_policy_link as for now it's only used by socket policies which do not need to be hashed. Ironically this will in fact allow us to use this helper for non-socket policies which I shall do later. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-11-03xfrm: add XFRMA_REPLAY_VAL attribute to SA messagesdingzhi
After this commit, the attribute XFRMA_REPLAY_VAL is added when no ESN replay value is defined. Thus sequence number values are always notified to userspace. Signed-off-by: dingzhi <zhi.ding@6wind.com> Signed-off-by: Adrien Mazarguil <adrien.mazarguil@6wind.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-10-30net: skb_fclone_busy() needs to detect orphaned skbEric Dumazet
Some drivers are unable to perform TX completions in a bound time. They instead call skb_orphan() Problem is skb_fclone_busy() has to detect this case, otherwise we block TCP retransmits and can freeze unlucky tcp sessions on mostly idle hosts. Signed-off-by: Eric Dumazet <edumazet@google.com> Fixes: 1f3279ae0c13 ("tcp: avoid retransmits of TCP packets hanging in host queues") Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-27xfrm: fix set but not used warning in xfrm_policy_queue_process()Fabian Frederick
err was set but unused. Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-10-20net: make skb_gso_segment error handling more robustFlorian Westphal
skb_gso_segment has three possible return values: 1. a pointer to the first segmented skb 2. an errno value (IS_ERR()) 3. NULL. This can happen when GSO is used for header verification. However, several callers currently test IS_ERR instead of IS_ERR_OR_NULL and would oops when NULL is returned. Note that these call sites should never actually see such a NULL return value; all callers mask out the GSO bits in the feature argument. However, there have been issues with some protocol handlers erronously not respecting the specified feature mask in some cases. It is preferable to get 'have to turn off hw offloading, else slow' reports rather than 'kernel crashes'. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01net: cleanup and document skb fclone layoutEric Dumazet
Lets use a proper structure to clearly document and implement skb fast clones. Then, we might experiment more easily alternative layouts. This patch adds a new skb_fclone_busy() helper, used by tcp and xfrm, to stop leaking of implementation details. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-28Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2014-09-25 1) Remove useless hash_resize_mutex in xfrm_hash_resize(). This mutex is used only there, but xfrm_hash_resize() can't be called concurrently at all. From Ying Xue. 2) Extend policy hashing to prefixed policies based on prefix lenght thresholds. From Christophe Gouault. 3) Make the policy hash table thresholds configurable via netlink. From Christophe Gouault. 4) Remove the maximum authentication length for AH. This was needed to limit stack usage. We switched already to allocate space, so no need to keep the limit. From Herbert Xu. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: arch/mips/net/bpf_jit.c drivers/net/can/flexcan.c Both the flexcan and MIPS bpf_jit conflicts were cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-18ipsec: Remove obsolete MAX_AH_AUTH_LENHerbert Xu
While tracking down the MAX_AH_AUTH_LEN crash in an old kernel I thought that this limit was rather arbitrary and we should just get rid of it. In fact it seems that we've already done all the work needed to remove it apart from actually removing it. This limit was there in order to limit stack usage. Since we've already switched over to allocating scratch space using kmalloc, there is no longer any need to limit the authentication length. This patch kills all references to it, including the BUG_ONs that led me here. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-09-16xfrm: Generate queueing routes only from route lookup functionsSteffen Klassert
Currently we genarate a queueing route if we have matching policies but can not resolve the states and the sysctl xfrm_larval_drop is disabled. Here we assume that dst_output() is called to kill the queued packets. Unfortunately this assumption is not true in all cases, so it is possible that these packets leave the system unwanted. We fix this by generating queueing routes only from the route lookup functions, here we can guarantee a call to dst_output() afterwards. Fixes: a0073fe18e71 ("xfrm: Add a state resolution packet queue") Reported-by: Konstantinos Kolelis <k.kolelis@sirrix.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-09-16xfrm: Generate blackhole routes only from route lookup functionsSteffen Klassert
Currently we genarate a blackhole route route whenever we have matching policies but can not resolve the states. Here we assume that dst_output() is called to kill the balckholed packets. Unfortunately this assumption is not true in all cases, so it is possible that these packets leave the system unwanted. We fix this by generating blackhole routes only from the route lookup functions, here we can guarantee a call to dst_output() afterwards. Fixes: 2774c131b1d ("xfrm: Handle blackhole route creation via afinfo.") Reported-by: Konstantinos Kolelis <k.kolelis@sirrix.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-09-09net: use kfree_skb_list() helper in more placesFlorian Westphal
Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-09-02xfrm: configure policy hash table thresholds by netlinkChristophe Gouault
Enable to specify local and remote prefix length thresholds for the policy hash table via a netlink XFRM_MSG_NEWSPDINFO message. prefix length thresholds are specified by XFRMA_SPD_IPV4_HTHRESH and XFRMA_SPD_IPV6_HTHRESH optional attributes (struct xfrmu_spdhthresh). example: struct xfrmu_spdhthresh thresh4 = { .lbits = 0; .rbits = 24; }; struct xfrmu_spdhthresh thresh6 = { .lbits = 0; .rbits = 56; }; struct nlmsghdr *hdr; struct nl_msg *msg; msg = nlmsg_alloc(); hdr = nlmsg_put(msg, NL_AUTO_PORT, NL_AUTO_SEQ, XFRMA_SPD_IPV4_HTHRESH, sizeof(__u32), NLM_F_REQUEST); nla_put(msg, XFRMA_SPD_IPV4_HTHRESH, sizeof(thresh4), &thresh4); nla_put(msg, XFRMA_SPD_IPV6_HTHRESH, sizeof(thresh6), &thresh6); nla_send_auto(sk, msg); The numbers are the policy selector minimum prefix lengths to put a policy in the hash table. - lbits is the local threshold (source address for out policies, destination address for in and fwd policies). - rbits is the remote threshold (destination address for out policies, source address for in and fwd policies). The default values are: XFRMA_SPD_IPV4_HTHRESH: 32 32 XFRMA_SPD_IPV6_HTHRESH: 128 128 Dynamic re-building of the SPD is performed when the thresholds values are changed. The current thresholds can be read via a XFRM_MSG_GETSPDINFO request: the kernel replies to XFRM_MSG_GETSPDINFO requests by an XFRM_MSG_NEWSPDINFO message, with both attributes XFRMA_SPD_IPV4_HTHRESH and XFRMA_SPD_IPV6_HTHRESH. Signed-off-by: Christophe Gouault <christophe.gouault@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-09-02xfrm: hash prefixed policies based on preflen thresholdsChristophe Gouault
The idea is an extension of the current policy hashing. Today only non-prefixed policies are stored in a hash table. This patch relaxes the constraints, and hashes policies whose prefix lengths are greater or equal to a configurable threshold. Each hash table (one per direction) maintains its own set of IPv4 and IPv6 thresholds (dbits4, sbits4, dbits6, sbits6), by default (32, 32, 128, 128). Example, if the output hash table is configured with values (16, 24, 56, 64): ip xfrm policy add dir out src 10.22.0.0/20 dst 10.24.1.0/24 ... => hashed ip xfrm policy add dir out src 10.22.0.0/16 dst 10.24.1.1/32 ... => hashed ip xfrm policy add dir out src 10.22.0.0/16 dst 10.24.0.0/16 ... => unhashed ip xfrm policy add dir out \ src 3ffe:304:124:2200::/60 dst 3ffe:304:124:2401::/64 ... => hashed ip xfrm policy add dir out \ src 3ffe:304:124:2200::/56 dst 3ffe:304:124:2401::2/128 ... => hashed ip xfrm policy add dir out \ src 3ffe:304:124:2200::/56 dst 3ffe:304:124:2400::/56 ... => unhashed The high order bits of the addresses (up to the threshold) are used to compute the hash key. Signed-off-by: Christophe Gouault <christophe.gouault@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-08-29xfrm: remove useless hash_resize_mutex locksYing Xue
In xfrm_state.c, hash_resize_mutex is defined as a local variable and only used in xfrm_hash_resize() which is declared as a work handler of xfrm.state_hash_work. But when the xfrm.state_hash_work work is put in the global workqueue(system_wq) with schedule_work(), the work will be really inserted in the global workqueue if it was not already queued, otherwise, it is still left in the same position on the the global workqueue. This means the xfrm_hash_resize() work handler is only executed once at any time no matter how many times its work is scheduled, that is, xfrm_hash_resize() is not called concurrently at all, so hash_resize_mutex is redundant for us. Cc: Christophe Gouault <christophe.gouault@6wind.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Ying Xue <ying.xue@windriver.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-08-06list: fix order of arguments for hlist_add_after(_rcu)Ken Helias
All other add functions for lists have the new item as first argument and the position where it is added as second argument. This was changed for no good reason in this function and makes using it unnecessary confusing. The name was changed to hlist_add_behind() to cause unconverted code to generate a compile error instead of using the wrong parameter order. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Ken Helias <kenhelias@firemail.de> Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> [intel driver bits] Cc: Hugh Dickins <hughd@google.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-30xfrm: Fix installation of AH IPsec SAsTobias Brunner
The SPI check introduced in ea9884b3acf3311c8a11db67bfab21773f6f82ba was intended for IPComp SAs but actually prevented AH SAs from getting installed (depending on the SPI). Fixes: ea9884b3acf3 ("xfrm: check user specified spi for IPComp") Cc: Fan Du <fan.du@windriver.com> Signed-off-by: Tobias Brunner <tobias@strongswan.org> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-06-26xfrm: Fix refcount imbalance in xfrm_lookupSteffen Klassert
xfrm_lookup must return a dst_entry with a refcount for the caller. Git commit 1a1ccc96abb ("xfrm: Remove caching of xfrm_policy_sk_bundles") removed this refcount for the socket policy case accidentally. This patch restores it and sets DST_NOCACHE flag to make sure that the dst_entry is freed when the refcount becomes null. Fixes: 1a1ccc96abb ("xfrm: Remove caching of xfrm_policy_sk_bundles") Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: include/net/inetpeer.h net/ipv6/output_core.c Changes in net were fixing bugs in code removed in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-06-03xfrm: fix race between netns cleanup and state expire notificationMichal Kubecek
The xfrm_user module registers its pernet init/exit after xfrm itself so that its net exit function xfrm_user_net_exit() is executed before xfrm_net_exit() which calls xfrm_state_fini() to cleanup the SA's (xfrm states). This opens a window between zeroing net->xfrm.nlsk pointer and deleting all xfrm_state instances which may access it (via the timer). If an xfrm state expires in this window, xfrm_exp_state_notify() will pass null pointer as socket to nlmsg_multicast(). As the notifications are called inside rcu_read_lock() block, it is sufficient to retrieve the nlsk socket with rcu_dereference() and check the it for null. Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-22Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2014-05-22 This is the last ipsec pull request before I leave for a three weeks vacation tomorrow. David, can you please take urgent ipsec patches directly into net/net-next during this time? I'll continue to run the ipsec/ipsec-next trees as soon as I'm back. 1) Simplify the xfrm audit handling, from Tetsuo Handa. 2) Codingstyle cleanup for xfrm_output, from abian Frederick. Please pull or let me know if there are problems. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-13net/xfrm/xfrm_output.c: move EXPORT_SYMBOLFabian Frederick
Fix checkpatch warning: "WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable" Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Fabian Frederick <fabf@skynet.be> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/ethernet/altera/altera_sgdma.c net/netlink/af_netlink.c net/sched/cls_api.c net/sched/sch_api.c The netlink conflict dealt with moving to netlink_capable() and netlink_ns_capable() in the 'net' tree vs. supporting 'tc' operations in non-init namespaces. These were simple transformations from netlink_capable to netlink_ns_capable. The Altera driver conflict was simply code removal overlapping some void pointer cast cleanups in net-next. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-05-07net: clean up snmp stats codeWANG Cong
commit 8f0ea0fe3a036a47767f9c80e (snmp: reduce percpu needs by 50%) reduced snmp array size to 1, so technically it doesn't have to be an array any more. What's more, after the following commit: commit 933393f58fef9963eac61db8093689544e29a600 Date: Thu Dec 22 11:58:51 2011 -0600 percpu: Remove irqsafe_cpu_xxx variants We simply say that regular this_cpu use must be safe regardless of preemption and interrupt state. That has no material change for x86 and s390 implementations of this_cpu operations. However, arches that do not provide their own implementation for this_cpu operations will now get code generated that disables interrupts instead of preemption. probably no arch wants to have SNMP_ARRAY_SZ == 2. At least after almost 3 years, no one complains. So, just convert the array to a single pointer and remove snmp_mib_init() and snmp_mib_free() as well. Cc: Christoph Lameter <cl@linux.com> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-24net: Use netlink_ns_capable to verify the permisions of netlink messagesEric W. Biederman
It is possible by passing a netlink socket to a more privileged executable and then to fool that executable into writing to the socket data that happens to be valid netlink message to do something that privileged executable did not intend to do. To keep this from happening replace bare capable and ns_capable calls with netlink_capable, netlink_net_calls and netlink_ns_capable calls. Which act the same as the previous calls except they verify that the opener of the socket had the desired permissions as well. Reported-by: Andy Lutomirski <luto@amacapital.net> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-04-23xfrm: Remove useless xfrm_audit struct.Tetsuo Handa
Commit f1370cc4 "xfrm: Remove useless secid field from xfrm_audit." changed "struct xfrm_audit" to have either { audit_get_loginuid(current) / audit_get_sessionid(current) } or { INVALID_UID / -1 } pair. This means that we can represent "struct xfrm_audit" as "bool". This patch replaces "struct xfrm_audit" argument with "bool". Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-04-22xfrm: Remove useless secid field from xfrm_audit.Tetsuo Handa
It seems to me that commit ab5f5e8b "[XFRM]: xfrm audit calls" is doing something strange at xfrm_audit_helper_usrinfo(). If secid != 0 && security_secid_to_secctx(secid) != 0, the caller calls audit_log_task_context() which basically does secid != 0 && security_secid_to_secctx(secid) == 0 case except that secid is obtained from current thread's context. Oh, what happens if secid passed to xfrm_audit_helper_usrinfo() was obtained from other thread's context? It might audit current thread's context rather than other thread's context if security_secid_to_secctx() in xfrm_audit_helper_usrinfo() failed for some reason. Then, are all the caller of xfrm_audit_helper_usrinfo() passing either secid obtained from current thread's context or secid == 0? It seems to me that they are. If I didn't miss something, we don't need to pass secid to xfrm_audit_helper_usrinfo() because audit_log_task_context() will obtain secid from current thread's context. Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-04-15ipv4: add a sock pointer to dst->output() path.Eric Dumazet
In the dst->output() path for ipv4, the code assumes the skb it has to transmit is attached to an inet socket, specifically via ip_mc_output() : The sk_mc_loop() test triggers a WARN_ON() when the provider of the packet is an AF_PACKET socket. The dst->output() method gets an additional 'struct sock *sk' parameter. This needs a cascade of changes so that this parameter can be propagated from vxlan to final consumer. Fixes: 8f646c922d55 ("vxlan: keep original skb ownership") Reported-by: lucien xin <lucien.xin@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: Documentation/devicetree/bindings/net/micrel-ks8851.txt net/core/netpoll.c The net/core/netpoll.c conflict is a bug fix in 'net' happening to code which is completely removed in 'net-next'. In micrel-ks8851.txt we simply have overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-18Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== One patch to rename a newly introduced struct. The rest is the rework of the IPsec virtual tunnel interface for ipv6 to support inter address family tunneling and namespace crossing. 1) Rename the newly introduced struct xfrm_filter to avoid a conflict with iproute2. From Nicolas Dichtel. 2) Introduce xfrm_input_afinfo to access the address family dependent tunnel callback functions properly. 3) Add and use a IPsec protocol multiplexer for ipv6. 4) Remove dst_entry caching. vti can lookup multiple different dst entries, dependent of the configured xfrm states. Therefore it does not make to cache a dst_entry. 5) Remove caching of flow informations. vti6 does not use the the tunnel endpoint addresses to do route and xfrm lookups. 6) Update the vti6 to use its own receive hook. 7) Remove the now unused xfrm_tunnel_notifier. This was used from vti and is replaced by the IPsec protocol multiplexer hooks. 8) Support inter address family tunneling for vti6. 9) Check if the tunnel endpoints of the xfrm state and the vti interface are matching and return an error otherwise. 10) Enable namespace crossing for vti devices. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-14xfrm: Introduce xfrm_input_afinfo to access the the callbacks properlySteffen Klassert
IPv6 can be build as a module, so we need mechanism to access the address family dependent callback functions properly. Therefore we introduce xfrm_input_afinfo, similar to that what we have for the address family dependent part of policies and states. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-03-12flowcache: Fix resource leaks on namespace exit.Steffen Klassert
We leak an active timer, the hotcpu notifier and all allocated resources when we exit a namespace. Fix this by introducing a flow_cache_fini() function where we release the resources before we exit. Fixes: ca925cf1534e ("flowcache: Make flow cache name space aware") Reported-by: Jakub Kicinski <moorray3@wp.pl> Tested-by: Jakub Kicinski <moorray3@wp.pl> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: Fan Du <fan.du@windriver.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-10selinux: add gfp argument to security_xfrm_policy_alloc and fix callersNikolay Aleksandrov
security_xfrm_policy_alloc can be called in atomic context so the allocation should be done with GFP_ATOMIC. Add an argument to let the callers choose the appropriate way. In order to do so a gfp argument needs to be added to the method xfrm_policy_alloc_security in struct security_operations and to the internal function selinux_xfrm_alloc_user. After that switch to GFP_ATOMIC in the atomic callers and leave GFP_KERNEL as before for the rest. The path that needed the gfp argument addition is: security_xfrm_policy_alloc -> security_ops.xfrm_policy_alloc_security -> all users of xfrm_policy_alloc_security (e.g. selinux_xfrm_policy_alloc) -> selinux_xfrm_alloc_user (here the allocation used to be GFP_KERNEL only) Now adding a gfp argument to selinux_xfrm_alloc_user requires us to also add it to security_context_to_sid which is used inside and prior to this patch did only GFP_KERNEL allocation. So add gfp argument to security_context_to_sid and adjust all of its callers as well. CC: Paul Moore <paul@paul-moore.com> CC: Dave Jones <davej@redhat.com> CC: Steffen Klassert <steffen.klassert@secunet.com> CC: Fan Du <fan.du@windriver.com> CC: David S. Miller <davem@davemloft.net> CC: LSM list <linux-security-module@vger.kernel.org> CC: SELinux list <selinux@tycho.nsa.gov> Signed-off-by: Nikolay Aleksandrov <nikolay@redhat.com> Acked-by: Paul Moore <paul@paul-moore.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-03-07xfrm: rename struct xfrm_filterNicolas Dichtel
iproute2 already defines a structure with that name, let's use another one to avoid any conflict. CC: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-03-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Conflicts: drivers/net/wireless/ath/ath9k/recv.c drivers/net/wireless/mwifiex/pcie.c net/ipv6/sit.c The SIT driver conflict consists of a bug fix being done by hand in 'net' (missing u64_stats_init()) whilst in 'net-next' a helper was created (netdev_alloc_pcpu_stats()) which takes care of this. The two wireless conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-26xfrm: Fix unlink race when policies are deleted.Steffen Klassert
When a policy is unlinked from the lists in thread context, the xfrm timer can fire before we can mark this policy as dead. So reinitialize the bydst hlist, then hlist_unhashed() will notice that this policy is not linked and will avoid a doulble unlink of that policy. Reported-by: Xianpeng Zhao <673321875@qq.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-25xfrm: Add xfrm_tunnel_skb_cb to the skb common bufferSteffen Klassert
IPsec vti_rcv needs to remind the tunnel pointer to check it later at the vti_rcv_cb callback. So add this pointer to the IPsec common buffer, initialize it and check it to avoid transport state matching of a tunneled packet. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-25xfrm4: Add IPsec protocol multiplexerSteffen Klassert
This patch add an IPsec protocol multiplexer. With this it is possible to add alternative protocol handlers as needed for IPsec virtual tunnel interfaces. Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>