summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2020-10-25mm: remove kzfree() compatibility definitionEric Biggers
Commit 453431a54934 ("mm, treewide: rename kzfree() to kfree_sensitive()") renamed kzfree() to kfree_sensitive(), but it left a compatibility definition of kzfree() to avoid being too disruptive. Since then a few more instances of kzfree() have slipped in. Just get rid of them and remove the compatibility definition once and for all. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-24random32: add noise from network and scheduling activityWilly Tarreau
With the removal of the interrupt perturbations in previous random32 change (random32: make prandom_u32() output unpredictable), the PRNG has become 100% deterministic again. While SipHash is expected to be way more robust against brute force than the previous Tausworthe LFSR, there's still the risk that whoever has even one temporary access to the PRNG's internal state is able to predict all subsequent draws till the next reseed (roughly every minute). This may happen through a side channel attack or any data leak. This patch restores the spirit of commit f227e3ec3b5c ("random32: update the net random state on interrupt and activity") in that it will perturb the internal PRNG's statee using externally collected noise, except that it will not pick that noise from the random pool's bits nor upon interrupt, but will rather combine a few elements along the Tx path that are collectively hard to predict, such as dev, skb and txq pointers, packet length and jiffies values. These ones are combined using a single round of SipHash into a single long variable that is mixed with the net_rand_state upon each invocation. The operation was inlined because it produces very small and efficient code, typically 3 xor, 2 add and 2 rol. The performance was measured to be the same (even very slightly better) than before the switch to SipHash; on a 6-core 12-thread Core i7-8700k equipped with a 40G NIC (i40e), the connection rate dropped from 556k/s to 555k/s while the SYN cookie rate grew from 5.38 Mpps to 5.45 Mpps. Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/ Cc: George Spelvin <lkml@sdf.org> Cc: Amit Klein <aksecurity@gmail.com> Cc: Eric Dumazet <edumazet@google.com> Cc: "Jason A. Donenfeld" <Jason@zx2c4.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: tytso@mit.edu Cc: Florian Westphal <fw@strlen.de> Cc: Marc Plumb <lkml.mplumb@gmail.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Signed-off-by: Willy Tarreau <w@1wt.eu>
2020-10-23Merge tag 'net-5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Cross-tree/merge window issues: - rtl8150: don't incorrectly assign random MAC addresses; fix late in the 5.9 cycle started depending on a return code from a function which changed with the 5.10 PR from the usb subsystem Current release regressions: - Revert "virtio-net: ethtool configurable RXCSUM", it was causing crashes at probe when control vq was not negotiated/available Previous release regressions: - ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO bus, only first device would be probed correctly - nexthop: Fix performance regression in nexthop deletion by effectively switching from recently added synchronize_rcu() to synchronize_rcu_expedited() - netsec: ignore 'phy-mode' device property on ACPI systems; the property is not populated correctly by the firmware, but firmware configures the PHY so just keep boot settings Previous releases - always broken: - tcp: fix to update snd_wl1 in bulk receiver fast path, addressing bulk transfers getting "stuck" - icmp: randomize the global rate limiter to prevent attackers from getting useful signal - r8169: fix operation under forced interrupt threading, make the driver always use hard irqs, even on RT, given the handler is light and only wants to schedule napi (and do so through a _irqoff() variant, preferably) - bpf: Enforce pointer id generation for all may-be-null register type to avoid pointers erroneously getting marked as null-checked - tipc: re-configure queue limit for broadcast link - net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels - fix various issues in chelsio inline tls driver Misc: - bpf: improve just-added bpf_redirect_neigh() helper api to support supplying nexthop by the caller - in case BPF program has already done a lookup we can avoid doing another one - remove unnecessary break statements - make MCTCP not select IPV6, but rather depend on it" * tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits) tcp: fix to update snd_wl1 in bulk receiver fast path net: Properly typecast int values to set sk_max_pacing_rate netfilter: nf_fwd_netdev: clear timestamp in forwarding path ibmvnic: save changed mac address to adapter->mac_addr selftests: mptcp: depends on built-in IPv6 Revert "virtio-net: ethtool configurable RXCSUM" rtnetlink: fix data overflow in rtnl_calcit() net: ethernet: mtk-star-emac: select REGMAP_MMIO net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device bpf, libbpf: Guard bpf inline asm from bpf_tail_call_static bpf, selftests: Extend test_tc_redirect to use modified bpf_redirect_neigh() bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop mptcp: depends on IPV6 but not as a module sfc: move initialisation of efx->filter_sem to efx_init_struct() mpls: load mpls_gso after mpls_iptunnel net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action() net: dsa: bcm_sf2: make const array static, makes object smaller mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it ...
2020-10-22tcp: fix to update snd_wl1 in bulk receiver fast pathNeal Cardwell
In the header prediction fast path for a bulk data receiver, if no data is newly acknowledged then we do not call tcp_ack() and do not call tcp_ack_update_window(). This means that a bulk receiver that receives large amounts of data can have the incoming sequence numbers wrap, so that the check in tcp_may_update_window fails: after(ack_seq, tp->snd_wl1) If the incoming receive windows are zero in this state, and then the connection that was a bulk data receiver later wants to send data, that connection can find itself persistently rejecting the window updates in incoming ACKs. This means the connection can persistently fail to discover that the receive window has opened, which in turn means that the connection is unable to send anything, and the connection's sending process can get permanently "stuck". The fix is to update snd_wl1 in the header prediction fast path for a bulk data receiver, so that it keeps up and does not see wrapping problems. This fix is based on a very nice and thorough analysis and diagnosis by Apollon Oikonomopoulos (see link below). This is a stable candidate but there is no Fixes tag here since the bug predates current git history. Just for fun: looks like the bug dates back to when header prediction was added in Linux v2.1.8 in Nov 1996. In that version tcp_rcv_established() was added, and the code only updates snd_wl1 in tcp_ack(), and in the new "Bulk data transfer: receiver" code path it does not call tcp_ack(). This fix seems to apply cleanly at least as far back as v3.2. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Neal Cardwell <ncardwell@google.com> Reported-by: Apollon Oikonomopoulos <apoikos@dmesg.gr> Tested-by: Apollon Oikonomopoulos <apoikos@dmesg.gr> Link: https://www.spinics.net/lists/netdev/msg692430.html Acked-by: Soheil Hassas Yeganeh <soheil@google.com> Acked-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201022143331.1887495-1-ncardwell.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-22net: Properly typecast int values to set sk_max_pacing_rateKe Li
In setsockopt(SO_MAX_PACING_RATE) on 64bit systems, sk_max_pacing_rate, after extended from 'u32' to 'unsigned long', takes unintentionally hiked value whenever assigned from an 'int' value with MSB=1, due to binary sign extension in promoting s32 to u64, e.g. 0x80000000 becomes 0xFFFFFFFF80000000. Thus inflated sk_max_pacing_rate causes subsequent getsockopt to return ~0U unexpectedly. It may also result in increased pacing rate. Fix by explicitly casting the 'int' value to 'unsigned int' before assigning it to sk_max_pacing_rate, for zero extension to happen. Fixes: 76a9ebe811fb ("net: extend sk_pacing_rate to unsigned long") Signed-off-by: Ji Li <jli@akamai.com> Signed-off-by: Ke Li <keli@akamai.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://lore.kernel.org/r/20201022064146.79873-1-keli@akamai.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Update debugging in IPVS tcp protocol handler to make it easier to understand, from longguang.yue 2) Update TCP tracker to deal with keepalive packet after re-registration, from Franceso Ruggeri. 3) Missing IP6SKB_FRAGMENTED from netfilter fragment reassembly, from Georg Kohmann. 4) Fix bogus packet drop in ebtables nat extensions, from Thimothee Cocault. 5) Fix typo in flowtable documentation. 6) Reset skb timestamp in nft_fwd_netdev. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski
Daniel Borkmann says: ==================== pull-request: bpf 2020-10-22 1) Fix enforcing NULL check in verifier for new helper return types of RET_PTR_TO_{BTF_ID,MEM_OR_BTF_ID}_OR_NULL, from Martin KaFai Lau. 2) Fix bpf_redirect_neigh() helper API before it becomes frozen by adding nexthop information as argument, from Toke Høiland-Jørgensen. 3) Guard & fix compilation of bpf_tail_call_static() when __bpf__ arch is not defined by compiler or clang too old, from Daniel Borkmann. 4) Remove misplaced break after return in attach_type_to_prog_type(), from Tom Rix. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-22Merge tag 'nfsd-5.10' of git://linux-nfs.org/~bfields/linuxLinus Torvalds
Pull nfsd updates from Bruce Fields: "The one new feature this time, from Anna Schumaker, is READ_PLUS, which has the same arguments as READ but allows the server to return an array of data and hole extents. Otherwise it's a lot of cleanup and bugfixes" * tag 'nfsd-5.10' of git://linux-nfs.org/~bfields/linux: (43 commits) NFSv4.2: Fix NFS4ERR_STALE error when doing inter server copy SUNRPC: fix copying of multiple pages in gss_read_proxy_verf() sunrpc: raise kernel RPC channel buffer size svcrdma: fix bounce buffers for unaligned offsets and multiple pages nfsd: remove unneeded break net/sunrpc: Fix return value for sysctl sunrpc.transports NFSD: Encode a full READ_PLUS reply NFSD: Return both a hole and a data segment NFSD: Add READ_PLUS hole segment encoding NFSD: Add READ_PLUS data support NFSD: Hoist status code encoding into XDR encoder functions NFSD: Map nfserr_wrongsec outside of nfsd_dispatch NFSD: Remove the RETURN_STATUS() macro NFSD: Call NFSv2 encoders on error returns NFSD: Fix .pc_release method for NFSv2 NFSD: Remove vestigial typedefs NFSD: Refactor nfsd_dispatch() error paths NFSD: Clean up nfsd_dispatch() variables NFSD: Clean up stale comments in nfsd_dispatch() NFSD: Clean up switch statement in nfsd_dispatch() ...
2020-10-22Merge tag '9p-for-5.10-rc1' of git://github.com/martinetd/linuxLinus Torvalds
Pull 9p updates from Dominique Martinet: "A couple of small fixes (loff_t overflow on 32bit, syzbot uninitialized variable warning) and code cleanup (xen)" * tag '9p-for-5.10-rc1' of git://github.com/martinetd/linux: net: 9p: initialize sun_server.sun_path to have addr's value only when addr is valid 9p/xen: Fix format argument warning 9P: Cast to loff_t before multiplying
2020-10-22netfilter: nf_fwd_netdev: clear timestamp in forwarding pathPablo Neira Ayuso
Similar to 7980d2eabde8 ("ipvs: clear skb->tstamp in forwarding path"). fq qdisc requires tstamp to be cleared in forwarding path. Fixes: 8203e2d844d3 ("net: clear skb->tstamp in forwarding paths") Fixes: fb420d5d91c1 ("tcp/fq: move back to CLOCK_MONOTONIC") Fixes: 80b14dee2bea ("net: Add a new socket option for a future transmit time.") Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-10-21rtnetlink: fix data overflow in rtnl_calcit()Di Zhu
"ip addr show" command execute error when we have a physical network card with a large number of VFs The return value of if_nlmsg_size() in rtnl_calcit() will exceed range of u16 data type when any network cards has a larger number of VFs. rtnl_vfinfo_size() will significant increase needed dump size when the value of num_vfs is larger. Eventually we get a wrong value of min_ifinfo_dump_size because of overflow which decides the memory size needed by netlink dump and netlink_dump() will return -EMSGSIZE because of not enough memory was allocated. So fix it by promoting min_dump_alloc data type to u32 to avoid whole netlink message size overflow and it's also align with the data type of struct netlink_callback{}.min_dump_alloc which is assigned by return value of rtnl_calcit() Signed-off-by: Di Zhu <zhudi21@huawei.com> Link: https://lore.kernel.org/r/20201021020053.1401-1-zhudi21@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-22bpf: Fix bpf_redirect_neigh helper api to support supplying nexthopToke Høiland-Jørgensen
Based on the discussion in [0], update the bpf_redirect_neigh() helper to accept an optional parameter specifying the nexthop information. This makes it possible to combine bpf_fib_lookup() and bpf_redirect_neigh() without incurring a duplicate FIB lookup - since the FIB lookup helper will return the nexthop information even if no neighbour is present, this can simply be passed on to bpf_redirect_neigh() if bpf_fib_lookup() returns BPF_FIB_LKUP_RET_NO_NEIGH. Thus fix & extend it before helper API is frozen. [0] https://lore.kernel.org/bpf/393e17fc-d187-3a8d-2f0d-a627c7c63fca@iogearbox.net/ Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/bpf/160322915615.32199.1187570224032024535.stgit@toke.dk
2020-10-21Merge tag 'ceph-for-5.10-rc1' of git://github.com/ceph/ceph-clientLinus Torvalds
Pull ceph updates from Ilya Dryomov: - a patch that removes crush_workspace_mutex (myself). CRUSH computations are no longer serialized and can run in parallel. - a couple new filesystem client metrics for "ceph fs top" command (Xiubo Li) - a fix for a very old messenger bug that affected the filesystem, marked for stable (myself) - assorted fixups and cleanups throughout the codebase from Jeff and others. * tag 'ceph-for-5.10-rc1' of git://github.com/ceph/ceph-client: (27 commits) libceph: clear con->out_msg on Policy::stateful_server faults libceph: format ceph_entity_addr nonces as unsigned libceph: fix ENTITY_NAME format suggestion libceph: move a dout in queue_con_delay() ceph: comment cleanups and clarifications ceph: break up send_cap_msg ceph: drop separate mdsc argument from __send_cap ceph: promote to unsigned long long before shifting ceph: don't SetPageError on readpage errors ceph: mark ceph_fmt_xattr() as printf-like for better type checking ceph: fold ceph_update_writeable_page into ceph_write_begin ceph: fold ceph_sync_writepages into writepage_nounlock ceph: fold ceph_sync_readpages into ceph_readpage ceph: don't call ceph_update_writeable_page from page_mkwrite ceph: break out writeback of incompatible snap context to separate function ceph: add a note explaining session reject error string libceph: switch to the new "osd blocklist add" command libceph, rbd, ceph: "blacklist" -> "blocklist" ceph: have ceph_writepages_start call pagevec_lookup_range_tag ceph: use kill_anon_super helper ...
2020-10-21mptcp: depends on IPV6 but not as a moduleMatthieu Baerts
Like TCP, MPTCP cannot be compiled as a module. Obviously, MPTCP IPv6' support also depends on CONFIG_IPV6. But not all functions from IPv6 code are exported. To simplify the code and reduce modifications outside MPTCP, it was decided from the beginning to support MPTCP with IPv6 only if CONFIG_IPV6 was built inlined. That's also why CONFIG_MPTCP_IPV6 was created. More modifications are needed to support CONFIG_IPV6=m. Even if it was not explicit, until recently, we were forcing CONFIG_IPV6 to be built-in because we had "select IPV6" in Kconfig. Now that we have "depends on IPV6", we have to explicitly set "IPV6=y" to force CONFIG_IPV6 not to be built as a module. In other words, we can now only have CONFIG_MPTCP_IPV6=y if CONFIG_IPV6=y. Note that the new dependency might hide the fact IPv6 is not supported in MPTCP even if we have CONFIG_IPV6=m. But selecting IPV6 like we did before was forcing it to be built-in while it was maybe not what the user wants. Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Fixes: 010b430d5df5 ("mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it") Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20201021105154.628257-1-matthieu.baerts@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-20mpls: load mpls_gso after mpls_iptunnelAlexander Ovechkin
mpls_iptunnel is used only for mpls encapsuation, and if encaplusated packet is larger than MTU we need mpls_gso for segmentation. Signed-off-by: Alexander Ovechkin <ovov@yandex-team.ru> Acked-by: Dmitry Yakunin <zeil@yandex-team.ru> Reviewed-by: David Ahern <dsahern@gmail.com> Link: https://lore.kernel.org/r/20201020114333.26866-1-ovov@yandex-team.ru Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-20net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnelsDavide Caratti
the following command # tc action add action tunnel_key \ > set src_ip 2001:db8::1 dst_ip 2001:db8::2 id 10 erspan_opts 1:6789:0:0 generates the following splat: BUG: KASAN: slab-out-of-bounds in tunnel_key_copy_opts+0xcc9/0x1010 [act_tunnel_key] Write of size 4 at addr ffff88813f5f1cc8 by task tc/873 CPU: 2 PID: 873 Comm: tc Not tainted 5.9.0+ #282 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 Call Trace: dump_stack+0x99/0xcb print_address_description.constprop.7+0x1e/0x230 kasan_report.cold.13+0x37/0x7c tunnel_key_copy_opts+0xcc9/0x1010 [act_tunnel_key] tunnel_key_init+0x160c/0x1f40 [act_tunnel_key] tcf_action_init_1+0x5b5/0x850 tcf_action_init+0x15d/0x370 tcf_action_add+0xd9/0x2f0 tc_ctl_action+0x29b/0x3a0 rtnetlink_rcv_msg+0x341/0x8d0 netlink_rcv_skb+0x120/0x380 netlink_unicast+0x439/0x630 netlink_sendmsg+0x719/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5ba/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f872a96b338 Code: 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 25 43 2c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 41 89 d4 55 RSP: 002b:00007ffffe367518 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000000005f8f5aed RCX: 00007f872a96b338 RDX: 0000000000000000 RSI: 00007ffffe367580 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000000001c R10: 000000000000000b R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000686760 R14: 0000000000000601 R15: 0000000000000000 Allocated by task 873: kasan_save_stack+0x19/0x40 __kasan_kmalloc.constprop.7+0xc1/0xd0 __kmalloc+0x151/0x310 metadata_dst_alloc+0x20/0x40 tunnel_key_init+0xfff/0x1f40 [act_tunnel_key] tcf_action_init_1+0x5b5/0x850 tcf_action_init+0x15d/0x370 tcf_action_add+0xd9/0x2f0 tc_ctl_action+0x29b/0x3a0 rtnetlink_rcv_msg+0x341/0x8d0 netlink_rcv_skb+0x120/0x380 netlink_unicast+0x439/0x630 netlink_sendmsg+0x719/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5ba/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff88813f5f1c00 which belongs to the cache kmalloc-256 of size 256 The buggy address is located 200 bytes inside of 256-byte region [ffff88813f5f1c00, ffff88813f5f1d00) The buggy address belongs to the page: page:0000000011b48a19 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x13f5f0 head:0000000011b48a19 order:1 compound_mapcount:0 flags: 0x17ffffc0010200(slab|head) raw: 0017ffffc0010200 0000000000000000 0000000d00000001 ffff888107c43400 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88813f5f1b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88813f5f1c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >ffff88813f5f1c80: 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc ^ ffff88813f5f1d00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88813f5f1d80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc using IPv6 tunnels, act_tunnel_key allocates a fixed amount of memory for the tunnel metadata, but then it expects additional bytes to store tunnel specific metadata with tunnel_key_copy_opts(). Fix the arguments of __ipv6_tun_set_dst(), so that 'md_size' contains the size previously computed by tunnel_key_get_opts_len(), like it's done for IPv4 tunnels. Fixes: 0ed5269f9e41 ("net/sched: add tunnel option support to act_tunnel_key") Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Link: https://lore.kernel.org/r/36ebe969f6d13ff59912d6464a4356fe6f103766.1603231100.git.dcaratti@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-20net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action()Guillaume Nault
We need to jump to the "err_out_locked" label when tcf_gate_get_entries() fails. Otherwise, tc_setup_flow_action() exits with ->tcfa_lock still held. Fixes: d29bdd69ecdd ("net: schedule: add action gate offloading") Signed-off-by: Guillaume Nault <gnault@redhat.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Link: https://lore.kernel.org/r/12f60e385584c52c22863701c0185e40ab08a7a7.1603207948.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-20mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting itGeert Uytterhoeven
MPTCP_IPV6 selects IPV6, thus enabling an optional feature the user may not want to enable. Fix this by making MPTCP_IPV6 depend on IPV6, like is done for all other IPv6 features. Fixes: f870fa0b5768842c ("mptcp: Add MPTCP socket stubs") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20201020073839.29226-1-geert@linux-m68k.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-20nfc: Ensure presence of NFC_ATTR_FIRMWARE_NAME attribute in ↵Defang Bo
nfc_genl_fw_download() Check that the NFC_ATTR_FIRMWARE_NAME attributes are provided by the netlink client prior to accessing them.This prevents potential unhandled NULL pointer dereference exceptions which can be triggered by malicious user-mode programs, if they omit one or both of these attributes. Similar to commit a0323b979f81 ("nfc: Ensure presence of required attributes in the activate_target handler"). Fixes: 9674da8759df ("NFC: Add firmware upload netlink command") Signed-off-by: Defang Bo <bodefang@126.com> Link: https://lore.kernel.org/r/1603107538-4744-1-git-send-email-bodefang@126.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-20mptcp: MPTCP_KUNIT_TESTS should depend on MPTCP instead of selecting itGeert Uytterhoeven
MPTCP_KUNIT_TESTS selects MPTCP, thus enabling an optional feature the user may not want to enable. Fix this by making the test depend on MPTCP instead. Fixes: a00a582203dbc43e ("mptcp: move crypto test to KUNIT") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20201019113240.11516-1-geert@linux-m68k.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-20mptcp: move mptcp_options_received's port initializationGeliang Tang
Move mptcp_options_received's port initialization from mptcp_parse_option to mptcp_get_options, put it together with the other fields initializations of mptcp_options_received. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-20mptcp: initialize mptcp_options_received's ahmacGeliang Tang
Initialize mptcp_options_received's ahmac to zero, otherwise it will be a random number when receiving ADD_ADDR suboption with echo-flag=1. Fixes: 3df523ab582c5 ("mptcp: Add ADD_ADDR handling") Signed-off-by: Geliang Tang <geliangtang@gmail.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-20net/sched: act_ct: Fix adding udp port mangle operationRoi Dayan
Need to use the udp header type and not tcp. Fixes: 9c26ba9b1f45 ("net/sched: act_ct: Instantiate flow table entry actions") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Link: https://lore.kernel.org/r/20201019090244.3015186-1-roid@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-20Merge tag 'nfs-for-5.10-1' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds
Pull NFS client updates from Anna Schumaker: "Stable Fixes: - Wait for stateid updates after CLOSE/OPEN_DOWNGRADE # v5.4+ - Fix nfs_path in case of a rename retry - Support EXCHID4_FLAG_SUPP_FENCE_OPS v4.2 EXCHANGE_ID flag New features and improvements: - Replace dprintk() calls with tracepoints - Make cache consistency bitmap dynamic - Added support for the NFS v4.2 READ_PLUS operation - Improvements to net namespace uniquifier Other bugfixes and cleanups: - Remove redundant clnt pointer - Don't update timeout values on connection resets - Remove redundant tracepoints - Various cleanups to comments - Fix oops when trying to use copy_file_range with v4.0 source server - Improvements to flexfiles mirrors - Add missing 'local_lock=posix' mount option" * tag 'nfs-for-5.10-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (55 commits) NFSv4.2: support EXCHGID4_FLAG_SUPP_FENCE_OPS 4.2 EXCHANGE_ID flag NFSv4: Fix up RCU annotations for struct nfs_netns_client NFS: Only reference user namespace from nfs4idmap struct instead of cred nfs: add missing "posix" local_lock constant table definition NFSv4: Use the net namespace uniquifier if it is set NFSv4: Clean up initialisation of uniquified client id strings NFS: Decode a full READ_PLUS reply SUNRPC: Add an xdr_align_data() function NFS: Add READ_PLUS hole segment decoding SUNRPC: Add the ability to expand holes in data pages SUNRPC: Split out _shift_data_right_tail() SUNRPC: Split out xdr_realign_pages() from xdr_align_pages() NFS: Add READ_PLUS data segment support NFS: Use xdr_page_pos() in NFSv4 decode_getacl() SUNRPC: Implement a xdr_page_pos() function SUNRPC: Split out a function for setting current page NFS: fix nfs_path in case of a rename retry fs: nfs: return per memcg count for xattr shrinkers NFSv4: Wait for stateid updates after CLOSE/OPEN_DOWNGRADE nfs: remove incorrect fallthrough label ...
2020-10-20SUNRPC: fix copying of multiple pages in gss_read_proxy_verf()Martijn de Gouw
When the passed token is longer than 4032 bytes, the remaining part of the token must be copied from the rqstp->rq_arg.pages. But the copy must make sure it happens in a consecutive way. With the existing code, the first memcpy copies 'length' bytes from argv->iobase, but since the header is in front, this never fills the whole first page of in_token->pages. The mecpy in the loop copies the following bytes, but starts writing at the next page of in_token->pages. This leaves the last bytes of page 0 unwritten. Symptoms were that users with many groups were not able to access NFS exports, when using Active Directory as the KDC. Signed-off-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com> Fixes: 5866efa8cbfb "SUNRPC: Fix svcauth_gss_proxy_init()" Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-10-20sunrpc: raise kernel RPC channel buffer sizeRoberto Bergantinos Corpas
Its possible that using AUTH_SYS and mountd manage-gids option a user may hit the 8k RPC channel buffer limit. This have been observed on field, causing unanswered RPCs on clients after mountd fails to write on channel : rpc.mountd[11231]: auth_unix_gid: error writing reply Userland nfs-utils uses a buffer size of 32k (RPC_CHAN_BUF_SIZE), so lets match those two. Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-10-20netfilter: nftables_offload: KASAN slab-out-of-bounds Read in ↵Saeed Mirzamohammadi
nft_flow_rule_create This patch fixes the issue due to: BUG: KASAN: slab-out-of-bounds in nft_flow_rule_create+0x622/0x6a2 net/netfilter/nf_tables_offload.c:40 Read of size 8 at addr ffff888103910b58 by task syz-executor227/16244 The error happens when expr->ops is accessed early on before performing the boundary check and after nft_expr_next() moves the expr to go out-of-bounds. This patch checks the boundary condition before expr->ops that fixes the slab-out-of-bounds Read issue. Add nft_expr_more() and use it to fix this problem. Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-10-20netfilter: ebtables: Fixes dropping of small packets in bridge natTimothée COCAULT
Fixes an error causing small packets to get dropped. skb_ensure_writable expects the second parameter to be a length in the ethernet payload.=20 If we want to write the ethernet header (src, dst), we should pass 0. Otherwise, packets with small payloads (< ETH_ALEN) will get dropped. Fixes: c1a831167901 ("netfilter: bridge: convert skb_make_writable to skb_ensure_writable") Signed-off-by: Timothée COCAULT <timothee.cocault@orange.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-10-20netfilter: Drop fragmented ndisc packets assembled in netfilterGeorg Kohmann
Fragmented ndisc packets assembled in netfilter not dropped as specified in RFC 6980, section 5. This behaviour breaks TAHI IPv6 Core Conformance Tests v6LC.2.1.22/23, V6LC.2.2.26/27 and V6LC.2.3.18. Setting IP6SKB_FRAGMENTED flag during reassembly. References: commit b800c3b966bc ("ipv6: drop fragmented ndisc packets by default (RFC 6980)") Signed-off-by: Georg Kohmann <geokohma@cisco.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-10-20netfilter: conntrack: connection timeout after re-registerFrancesco Ruggeri
If the first packet conntrack sees after a re-register is an outgoing keepalive packet with no data (SEG.SEQ = SND.NXT-1), td_end is set to SND.NXT-1. When the peer correctly acknowledges SND.NXT, tcp_in_window fails check III (Upper bound for valid (s)ack: sack <= receiver.td_end) and returns false, which cascades into nf_conntrack_in setting skb->_nfct = 0 and in later conntrack iptables rules not matching. In cases where iptables are dropping packets that do not match conntrack rules this can result in idle tcp connections to time out. v2: adjust td_end when getting the reply rather than when sending out the keepalive packet. Fixes: f94e63801ab2 ("netfilter: conntrack: reset tcp maxwin on re-register") Signed-off-by: Francesco Ruggeri <fruggeri@arista.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-10-20ipvs: adjust the debug info in function set_tcp_statelongguang.yue
Outputting client,virtual,dst addresses info when tcp state changes, which makes the connection debug more clear Signed-off-by: longguang.yue <bigclouds@163.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-10-19nexthop: Fix performance regression in nexthop deletionIdo Schimmel
While insertion of 16k nexthops all using the same netdev ('dummy10') takes less than a second, deletion takes about 130 seconds: # time -p ip -b nexthop.batch real 0.29 user 0.01 sys 0.15 # time -p ip link set dev dummy10 down real 131.03 user 0.06 sys 0.52 This is because of repeated calls to synchronize_rcu() whenever a nexthop is removed from a nexthop group: # /usr/share/bcc/tools/offcputime -p `pgrep -nx ip` -K ... b'finish_task_switch' b'schedule' b'schedule_timeout' b'wait_for_completion' b'__wait_rcu_gp' b'synchronize_rcu.part.0' b'synchronize_rcu' b'__remove_nexthop' b'remove_nexthop' b'nexthop_flush_dev' b'nh_netdev_event' b'raw_notifier_call_chain' b'call_netdevice_notifiers_info' b'__dev_notify_flags' b'dev_change_flags' b'do_setlink' b'__rtnl_newlink' b'rtnl_newlink' b'rtnetlink_rcv_msg' b'netlink_rcv_skb' b'rtnetlink_rcv' b'netlink_unicast' b'netlink_sendmsg' b'____sys_sendmsg' b'___sys_sendmsg' b'__sys_sendmsg' b'__x64_sys_sendmsg' b'do_syscall_64' b'entry_SYSCALL_64_after_hwframe' - ip (277) 126554955 Since nexthops are always deleted under RTNL, synchronize_net() can be used instead. It will call synchronize_rcu_expedited() which only blocks for several microseconds as opposed to multiple milliseconds like synchronize_rcu(). With this patch deletion of 16k nexthops takes less than a second: # time -p ip link set dev dummy10 down real 0.12 user 0.00 sys 0.04 Tested with fib_nexthops.sh which includes torture tests that prompted the initial change: # ./fib_nexthops.sh ... Tests passed: 134 Tests failed: 0 Fixes: 90f33bffa382 ("nexthops: don't modify published nexthop groups") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Reviewed-by: David Ahern <dsahern@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Link: https://lore.kernel.org/r/20201016172914.643282-1-idosch@idosch.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-19net: dsa: tag_ksz: KSZ8795 and KSZ9477 also use tail tagsChristian Eggers
The Marvell 88E6060 uses tag_trailer.c and the KSZ8795, KSZ9477 and KSZ9893 switches also use tail tags. Fixes: 7a6ffe764be3 ("net: dsa: point out the tail taggers") Signed-off-by: Christian Eggers <ceggers@arri.de> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20201016171603.10587-1-ceggers@arri.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-18net: core: use list_del_init() instead of list_del() in netdev_run_todo()Taehee Yoo
dev->unlink_list is reused unless dev is deleted. So, list_del() should not be used. Due to using list_del(), dev->unlink_list can't be reused so that dev->nested_level update logic doesn't work. In order to fix this bug, list_del_init() should be used instead of list_del(). Test commands: ip link add bond0 type bond ip link add bond1 type bond ip link set bond0 master bond1 ip link set bond0 nomaster ip link set bond1 master bond0 ip link set bond1 nomaster Splat looks like: [ 255.750458][ T1030] ============================================ [ 255.751967][ T1030] WARNING: possible recursive locking detected [ 255.753435][ T1030] 5.9.0-rc8+ #772 Not tainted [ 255.754553][ T1030] -------------------------------------------- [ 255.756047][ T1030] ip/1030 is trying to acquire lock: [ 255.757304][ T1030] ffff88811782a280 (&dev_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync_multiple+0xc2/0x150 [ 255.760056][ T1030] [ 255.760056][ T1030] but task is already holding lock: [ 255.761862][ T1030] ffff88811130a280 (&dev_addr_list_lock_key/1){+...}-{2:2}, at: bond_enslave+0x3d4d/0x43e0 [bonding] [ 255.764581][ T1030] [ 255.764581][ T1030] other info that might help us debug this: [ 255.766645][ T1030] Possible unsafe locking scenario: [ 255.766645][ T1030] [ 255.768566][ T1030] CPU0 [ 255.769415][ T1030] ---- [ 255.770259][ T1030] lock(&dev_addr_list_lock_key/1); [ 255.771629][ T1030] lock(&dev_addr_list_lock_key/1); [ 255.772994][ T1030] [ 255.772994][ T1030] *** DEADLOCK *** [ 255.772994][ T1030] [ 255.775091][ T1030] May be due to missing lock nesting notation [ 255.775091][ T1030] [ 255.777182][ T1030] 2 locks held by ip/1030: [ 255.778299][ T1030] #0: ffffffffb1f63250 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x2e4/0x8b0 [ 255.780600][ T1030] #1: ffff88811130a280 (&dev_addr_list_lock_key/1){+...}-{2:2}, at: bond_enslave+0x3d4d/0x43e0 [bonding] [ 255.783411][ T1030] [ 255.783411][ T1030] stack backtrace: [ 255.784874][ T1030] CPU: 7 PID: 1030 Comm: ip Not tainted 5.9.0-rc8+ #772 [ 255.786595][ T1030] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014 [ 255.789030][ T1030] Call Trace: [ 255.789850][ T1030] dump_stack+0x99/0xd0 [ 255.790882][ T1030] __lock_acquire.cold.71+0x166/0x3cc [ 255.792285][ T1030] ? register_lock_class+0x1a30/0x1a30 [ 255.793619][ T1030] ? rcu_read_lock_sched_held+0x91/0xc0 [ 255.794963][ T1030] ? rcu_read_lock_bh_held+0xa0/0xa0 [ 255.796246][ T1030] lock_acquire+0x1b8/0x850 [ 255.797332][ T1030] ? dev_mc_sync_multiple+0xc2/0x150 [ 255.798624][ T1030] ? bond_enslave+0x3d4d/0x43e0 [bonding] [ 255.800039][ T1030] ? check_flags+0x50/0x50 [ 255.801143][ T1030] ? lock_contended+0xd80/0xd80 [ 255.802341][ T1030] _raw_spin_lock_nested+0x2e/0x70 [ 255.803592][ T1030] ? dev_mc_sync_multiple+0xc2/0x150 [ 255.804897][ T1030] dev_mc_sync_multiple+0xc2/0x150 [ 255.806168][ T1030] bond_enslave+0x3d58/0x43e0 [bonding] [ 255.807542][ T1030] ? __lock_acquire+0xe53/0x51b0 [ 255.808824][ T1030] ? bond_update_slave_arr+0xdc0/0xdc0 [bonding] [ 255.810451][ T1030] ? check_chain_key+0x236/0x5e0 [ 255.811742][ T1030] ? mutex_is_locked+0x13/0x50 [ 255.812910][ T1030] ? rtnl_is_locked+0x11/0x20 [ 255.814061][ T1030] ? netdev_master_upper_dev_get+0xf/0x120 [ 255.815553][ T1030] do_setlink+0x94c/0x3040 [ ... ] Reported-by: syzbot+4a0f7bc34e3997a6c7df@syzkaller.appspotmail.com Fixes: 1fc70edb7d7b ("net: core: add nested_level variable in net_device") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Link: https://lore.kernel.org/r/20201015162606.9377-1-ap420073@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-18net: openvswitch: fix to make sure flow_lookup() is not preemptedEelco Chaudron
The flow_lookup() function uses per CPU variables, which must be called with BH disabled. However, this is fine in the general NAPI use case where the local BH is disabled. But, it's also called from the netlink context. The below patch makes sure that even in the netlink path, the BH is disabled. In addition, u64_stats_update_begin() requires a lock to ensure one writer which is not ensured here. Making it per-CPU and disabling NAPI (softirq) ensures that there is always only one writer. Fixes: eac87c413bf9 ("net: openvswitch: reorder masks array based on usage") Reported-by: Juri Lelli <jlelli@redhat.com> Signed-off-by: Eelco Chaudron <echaudro@redhat.com> Link: https://lore.kernel.org/r/160295903253.7789.826736662555102345.stgit@ebuild Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-16icmp: randomize the global rate limiterEric Dumazet
Keyu Man reported that the ICMP rate limiter could be used by attackers to get useful signal. Details will be provided in an upcoming academic publication. Our solution is to add some noise, so that the attackers no longer can get help from the predictable token bucket limiter. Fixes: 4cdf507d5452 ("icmp: add a global rate limitation") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Keyu Man <kman001@ucr.edu> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-16tipc: fix incorrect setting window for bcast linkHoang Huu Le
In commit 16ad3f4022bb ("tipc: introduce variable window congestion control"), we applied the algorithm to select window size from minimum window to the configured maximum window for unicast link, and, besides we chose to keep the window size for broadcast link unchanged and equal (i.e fix window 50) However, when setting maximum window variable via command, the window variable was re-initialized to unexpect value (i.e 32). We fix this by updating the fix window for broadcast as we stated. Fixes: 16ad3f4022bb ("tipc: introduce variable window congestion control") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Hoang Huu Le <hoang.h.le@dektech.com.au> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-16tipc: re-configure queue limit for broadcast linkHoang Huu Le
The queue limit of the broadcast link is being calculated base on initial MTU. However, when MTU value changed (e.g manual changing MTU on NIC device, MTU negotiation etc.,) we do not re-calculate queue limit. This gives throughput does not reflect with the change. So fix it by calling the function to re-calculate queue limit of the broadcast link. Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Hoang Huu Le <hoang.h.le@dektech.com.au> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-16svcrdma: fix bounce buffers for unaligned offsets and multiple pagesDan Aloni
This was discovered using O_DIRECT at the client side, with small unaligned file offsets or IOs that span multiple file pages. Fixes: e248aa7be86 ("svcrdma: Remove max_sge check at connect time") Signed-off-by: Dan Aloni <dan@kernelim.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-10-16net/sunrpc: Fix return value for sysctl sunrpc.transportsArtur Molchanov
Fix returning value for sysctl sunrpc.transports. Return error code from sysctl proc_handler function proc_do_xprt instead of number of the written bytes. Otherwise sysctl returns random garbage for this key. Since v1: - Handle negative returned value from memory_read_from_buffer as an error Signed-off-by: Artur Molchanov <arturmolchanov@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-10-15Merge tag 'net-next-5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: - Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. - Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). - Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. - Allow more than 255 IPv4 multicast interfaces. - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. - In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. - Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. - Allow more calls to same peer in RxRPC. - Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. - Add TC actions for implementing MPLS L2 VPNs. - Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. - Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. - Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. - Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. - Support sleepable BPF programs, initially targeting LSM and tracing. - Add bpf_d_path() helper for returning full path for given 'struct path'. - Make bpf_tail_call compatible with bpf-to-bpf calls. - Allow BPF programs to call map_update_elem on sockmaps. - Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). - Support listing and getting information about bpf_links via the bpf syscall. - Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). - Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. - Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). - In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. - Add XDP support for Intel's igb driver. - Support offloading TC flower classification and filtering rules to mscc_ocelot switches. - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. - Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. - Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. - Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. - Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. - Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). * tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits) Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH" net, sockmap: Don't call bpf_prog_put() on NULL pointer bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo bpf, sockmap: Add locking annotations to iterator netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements net: fix pos incrementment in ipv6_route_seq_next net/smc: fix invalid return code in smcd_new_buf_create() net/smc: fix valid DMBE buffer sizes net/smc: fix use-after-free of delayed events bpfilter: Fix build error with CONFIG_BPFILTER_UMH cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info bpf: Fix register equivalence tracking. rxrpc: Fix loss of final ack on shutdown rxrpc: Fix bundle counting for exclusive connections netfilter: restore NF_INET_NUMHOOKS ibmveth: Identify ingress large send packets. ibmveth: Switch order of ibmveth_helper calls. cxgb4: handle 4-tuple PEDIT to NAT mode translation selftests: Add VRF route leaking tests ...
2020-10-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-10-15 The main changes are: 1) Fix register equivalence tracking in verifier, from Alexei Starovoitov. 2) Fix sockmap error path to not call bpf_prog_put() with NULL, from Alex Dewar. 3) Fix sockmap to add locking annotations to iterator, from Lorenz Bauer. 4) Fix tcp_hdr_options test to use loopback address, from Martin KaFai Lau. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Minor conflicts in net/mptcp/protocol.h and tools/testing/selftests/net/Makefile. In both cases code was added on both sides in the same place so just keep both. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-15Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"Jakub Kicinski
This reverts commit 1d273fcc2c29343e59658276b77b02e5897a3123. Alexei points out there's nothing implying headers will be built and therefore exist under usr/include, so this fix doesn't make much sense. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-15net, sockmap: Don't call bpf_prog_put() on NULL pointerAlex Dewar
If bpf_prog_inc_not_zero() fails for skb_parser, then bpf_prog_put() is called unconditionally on skb_verdict, even though it may be NULL. Fix and tidy up error path. Fixes: 743df8b7749f ("bpf, sockmap: Check skb_verdict and skb_parser programs explicitly") Addresses-Coverity-ID: 1497799: Null pointer dereferences (FORWARD_NULL) Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jakub Sitnicki <jakub@cloudflare.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20201012170952.60750-1-alex.dewar90@gmail.com
2020-10-15bpf, sockmap: Add locking annotations to iteratorLorenz Bauer
The sparse checker currently outputs the following warnings: include/linux/rcupdate.h:632:9: sparse: sparse: context imbalance in 'sock_hash_seq_start' - wrong count at exit include/linux/rcupdate.h:632:9: sparse: sparse: context imbalance in 'sock_map_seq_start' - wrong count at exit Add the necessary __acquires and __release annotations to make the iterator locking schema palatable to sparse. Also add __must_hold for good measure. The kernel codebase uses both __acquires(rcu) and __acquires(RCU). I couldn't find any guidance which one is preferred, so I used what is easier to type out. Fixes: 0365351524d7 ("net: Allow iterating sockmap and sockhash") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Lorenz Bauer <lmb@cloudflare.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Jakub Sitnicki <jakub@cloudflare.com> Link: https://lore.kernel.org/bpf/20201012091850.67452-1-lmb@cloudflare.com
2020-10-15netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statementsDavide Caratti
nftables payload statements are used to mangle SCTP headers, but they can only replace the Internet Checksum. As a consequence, nftables rules that mangle sport/dport/vtag in SCTP headers potentially generate packets that are discarded by the receiver, unless the CRC-32C is "offloaded" (e.g the rule mangles a skb having 'ip_summed' equal to 'CHECKSUM_PARTIAL'. Fix this extending uAPI definitions and L4 checksum update function, in a way that userspace programs (e.g. nft) can instruct the kernel to compute CRC-32C in SCTP headers. Also ensure that LIBCRC32C is built if NF_TABLES is 'y' or 'm' in the kernel build configuration. Signed-off-by: Davide Caratti <dcaratti@redhat.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-15net: fix pos incrementment in ipv6_route_seq_nextYonghong Song
Commit 4fc427e05158 ("ipv6_route_seq_next should increase position index") tried to fix the issue where seq_file pos is not increased if a NULL element is returned with seq_ops->next(). See bug https://bugzilla.kernel.org/show_bug.cgi?id=206283 The commit effectively does: - increase pos for all seq_ops->start() - increase pos for all seq_ops->next() For ipv6_route, increasing pos for all seq_ops->next() is correct. But increasing pos for seq_ops->start() is not correct since pos is used to determine how many items to skip during seq_ops->start(): iter->skip = *pos; seq_ops->start() just fetches the *current* pos item. The item can be skipped only after seq_ops->show() which essentially is the beginning of seq_ops->next(). For example, I have 7 ipv6 route entries, root@arch-fb-vm1:~/net-next dd if=/proc/net/ipv6_route bs=4096 00000000000000000000000000000000 40 00000000000000000000000000000000 00 00000000000000000000000000000000 00000400 00000001 00000000 00000001 eth0 fe800000000000000000000000000000 40 00000000000000000000000000000000 00 00000000000000000000000000000000 00000100 00000001 00000000 00000001 eth0 00000000000000000000000000000000 00 00000000000000000000000000000000 00 00000000000000000000000000000000 ffffffff 00000001 00000000 00200200 lo 00000000000000000000000000000001 80 00000000000000000000000000000000 00 00000000000000000000000000000000 00000000 00000003 00000000 80200001 lo fe800000000000002050e3fffebd3be8 80 00000000000000000000000000000000 00 00000000000000000000000000000000 00000000 00000002 00000000 80200001 eth0 ff000000000000000000000000000000 08 00000000000000000000000000000000 00 00000000000000000000000000000000 00000100 00000004 00000000 00000001 eth0 00000000000000000000000000000000 00 00000000000000000000000000000000 00 00000000000000000000000000000000 ffffffff 00000001 00000000 00200200 lo 0+1 records in 0+1 records out 1050 bytes (1.0 kB, 1.0 KiB) copied, 0.00707908 s, 148 kB/s root@arch-fb-vm1:~/net-next In the above, I specify buffer size 4096, so all records can be returned to user space with a single trip to the kernel. If I use buffer size 128, since each record size is 149, internally kernel seq_read() will read 149 into its internal buffer and return the data to user space in two read() syscalls. Then user read() syscall will trigger next seq_ops->start(). Since the current implementation increased pos even for seq_ops->start(), it will skip record #2, #4 and #6, assuming the first record is #1. root@arch-fb-vm1:~/net-next dd if=/proc/net/ipv6_route bs=128 00000000000000000000000000000000 40 00000000000000000000000000000000 00 00000000000000000000000000000000 00000400 00000001 00000000 00000001 eth0 00000000000000000000000000000000 00 00000000000000000000000000000000 00 00000000000000000000000000000000 ffffffff 00000001 00000000 00200200 lo fe800000000000002050e3fffebd3be8 80 00000000000000000000000000000000 00 00000000000000000000000000000000 00000000 00000002 00000000 80200001 eth0 00000000000000000000000000000000 00 00000000000000000000000000000000 00 00000000000000000000000000000000 ffffffff 00000001 00000000 00200200 lo 4+1 records in 4+1 records out 600 bytes copied, 0.00127758 s, 470 kB/s To fix the problem, create a fake pos pointer so seq_ops->start() won't actually increase seq_file pos. With this fix, the above `dd` command with `bs=128` will show correct result. Fixes: 4fc427e05158 ("ipv6_route_seq_next should increase position index") Cc: Alexei Starovoitov <ast@kernel.org> Suggested-by: Vasily Averin <vvs@virtuozzo.com> Reviewed-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: Yonghong Song <yhs@fb.com> Acked-by: Martin KaFai Lau <kafai@fb.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-15net/smc: fix invalid return code in smcd_new_buf_create()Karsten Graul
smc_ism_register_dmb() returns error codes set by the ISM driver which are not guaranteed to be negative or in the errno range. Such values would not be handled by ERR_PTR() and finally the return code will be used as a memory address. Fix that by using a valid negative errno value with ERR_PTR(). Fixes: 72b7f6c48708 ("net/smc: unique reason code for exceeded max dmb count") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-15net/smc: fix valid DMBE buffer sizesKarsten Graul
The SMCD_DMBE_SIZES should include all valid DMBE buffer sizes, so the correct value is 6 which means 1MB. With 7 the registration of an ISM buffer would always fail because of the invalid size requested. Fix that and set the value to 6. Fixes: c6ba7c9ba43d ("net/smc: add base infrastructure for SMC-D and ISM") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>