summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2020-07-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net into masterLinus Torvalds
Pull networking fixes from David Miller: 1) Fix RCU locaking in iwlwifi, from Johannes Berg. 2) mt76 can access uninitialized NAPI struct, from Felix Fietkau. 3) Fix race in updating pause settings in bnxt_en, from Vasundhara Volam. 4) Propagate error return properly during unbind failures in ax88172a, from George Kennedy. 5) Fix memleak in adf7242_probe, from Liu Jian. 6) smc_drv_probe() can leak, from Wang Hai. 7) Don't muck with the carrier state if register_netdevice() fails in the bonding driver, from Taehee Yoo. 8) Fix memleak in dpaa_eth_probe, from Liu Jian. 9) Need to check skb_put_padto() return value in hsr_fill_tag(), from Murali Karicheri. 10) Don't lose ionic RSS hash settings across FW update, from Shannon Nelson. 11) Fix clobbered SKB control block in act_ct, from Wen Xu. 12) Missing newlink in "tx_timeout" sysfs output, from Xiongfeng Wang. 13) IS_UDPLITE cleanup a long time ago, incorrectly handled transformations involving UDPLITE_RECV_CC. From Miaohe Lin. 14) Unbalanced locking in netdevsim, from Taehee Yoo. 15) Suppress false-positive error messages in qed driver, from Alexander Lobakin. 16) Out of bounds read in ax25_connect and ax25_sendmsg, from Peilin Ye. 17) Missing SKB release in cxgb4's uld_send(), from Navid Emamdoost. 18) Uninitialized value in geneve_changelink(), from Cong Wang. 19) Fix deadlock in xen-netfront, from Andera Righi. 19) flush_backlog() frees skbs with IRQs disabled, so should use dev_kfree_skb_irq() instead of kfree_skb(). From Subash Abhinov Kasiviswanathan. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits) drivers/net/wan: lapb: Corrected the usage of skb_cow dev: Defer free of skbs in flush_backlog qrtr: orphan socket in qrtr_release() xen-netfront: fix potential deadlock in xennet_remove() flow_offload: Move rhashtable inclusion to the source file geneve: fix an uninitialized value in geneve_changelink() bonding: check return value of register_netdevice() in bond_newlink() tcp: allow at most one TLP probe per flight AX.25: Prevent integer overflows in connect and sendmsg cxgb4: add missing release on skb in uld_send() net: atlantic: fix PTP on AQC10X AX.25: Prevent out-of-bounds read in ax25_sendmsg() sctp: shrink stream outq when fails to do addstream reconf sctp: shrink stream outq only when new outcnt < old outcnt AX.25: Fix out-of-bounds read in ax25_connect() enetc: Remove the mdio bus on PF probe bailout net: ethernet: ti: add NETIF_F_HW_TC hw feature flag for taprio offload net: ethernet: ave: Fix error returns in ave_init drivers/net/wan/x25_asy: Fix to make it work ipvs: fix the connection sync failed in some cases ...
2020-07-24dev: Defer free of skbs in flush_backlogSubash Abhinov Kasiviswanathan
IRQs are disabled when freeing skbs in input queue. Use the IRQ safe variant to free skbs here. Fixes: 145dd5f9c88f ("net: flush the softnet backlog in process context") Signed-off-by: Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-24qrtr: orphan socket in qrtr_release()Cong Wang
We have to detach sock from socket in qrtr_release(), otherwise skb->sk may still reference to this socket when the skb is released in tun->queue, particularly sk->sk_wq still points to &sock->wq, which leads to a UAF. Reported-and-tested-by: syzbot+6720d64f31c081c2f708@syzkaller.appspotmail.com Fixes: 28fb4e59a47d ("net: qrtr: Expose tunneling endpoint to user space") Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-24flow_offload: Move rhashtable inclusion to the source fileHerbert Xu
I noticed that touching linux/rhashtable.h causes lib/vsprintf.c to be rebuilt. This dependency came through a bogus inclusion in the file net/flow_offload.h. This patch moves it to the right place. This patch also removes a lingering rhashtable inclusion in cls_api created by the same commit. Fixes: 4e481908c51b ("flow_offload: move tc indirect block to...") Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller
Pablo Neira Ayuso says: ==================== Netfilter/IPVS fixes for net The following patchset contains Netfilter/IPVS fixes for net: 1) Fix NAT hook deletion when table is dormant, from Florian Westphal. 2) Fix IPVS sync stalls, from guodeqing. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-23tcp: allow at most one TLP probe per flightYuchung Cheng
Previously TLP may send multiple probes of new data in one flight. This happens when the sender is cwnd limited. After the initial TLP containing new data is sent, the sender receives another ACK that acks partial inflight. It may re-arm another TLP timer to send more, if no further ACK returns before the next TLP timeout (PTO) expires. The sender may send in theory a large amount of TLP until send queue is depleted. This only happens if the sender sees such irregular uncommon ACK pattern. But it is generally undesirable behavior during congestion especially. The original TLP design restrict only one TLP probe per inflight as published in "Reducing Web Latency: the Virtue of Gentle Aggression", SIGCOMM 2013. This patch changes TLP to send at most one probe per inflight. Note that if the sender is app-limited, TLP retransmits old data and did not have this issue. Signed-off-by: Yuchung Cheng <ycheng@google.com> Signed-off-by: Neal Cardwell <ncardwell@google.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-23AX.25: Prevent integer overflows in connect and sendmsgDan Carpenter
We recently added some bounds checking in ax25_connect() and ax25_sendmsg() and we so we removed the AX25_MAX_DIGIS checks because they were no longer required. Unfortunately, I believe they are required to prevent integer overflows so I have added them back. Fixes: 8885bb0621f0 ("AX.25: Prevent out-of-bounds read in ax25_sendmsg()") Fixes: 2f2a7ffad5c6 ("AX.25: Fix out-of-bounds read in ax25_connect()") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22AX.25: Prevent out-of-bounds read in ax25_sendmsg()Peilin Ye
Checks on `addr_len` and `usax->sax25_ndigis` are insufficient. ax25_sendmsg() can go out of bounds when `usax->sax25_ndigis` equals to 7 or 8. Fix it. It is safe to remove `usax->sax25_ndigis > AX25_MAX_DIGIS`, since `addr_len` is guaranteed to be less than or equal to `sizeof(struct full_sockaddr_ax25)` Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22sctp: shrink stream outq when fails to do addstream reconfXin Long
When adding a stream with stream reconf, the new stream firstly is in CLOSED state but new out chunks can still be enqueued. Then once gets the confirmation from the peer, the state will change to OPEN. However, if the peer denies, it needs to roll back the stream. But when doing that, it only sets the stream outcnt back, and the chunks already in the new stream don't get purged. It caused these chunks can still be dequeued in sctp_outq_dequeue_data(). As its stream is still in CLOSE, the chunk will be enqueued to the head again by sctp_outq_head_data(). This chunk will never be sent out, and the chunks after it can never be dequeued. The assoc will be 'hung' in a dead loop of sending this chunk. To fix it, this patch is to purge these chunks already in the new stream by calling sctp_stream_shrink_out() when failing to do the addstream reconf. Fixes: 11ae76e67a17 ("sctp: implement receiver-side procedures for the Reconf Response Parameter") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22sctp: shrink stream outq only when new outcnt < old outcntXin Long
It's not necessary to go list_for_each for outq->out_chunk_list when new outcnt >= old outcnt, as no chunk with higher sid than new (outcnt - 1) exists in the outqueue. While at it, also move the list_for_each code in a new function sctp_stream_shrink_out(), which will be used in the next patch. Signed-off-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22AX.25: Fix out-of-bounds read in ax25_connect()Peilin Ye
Checks on `addr_len` and `fsa->fsa_ax25.sax25_ndigis` are insufficient. ax25_connect() can go out of bounds when `fsa->fsa_ax25.sax25_ndigis` equals to 7 or 8. Fix it. This issue has been reported as a KMSAN uninit-value bug, because in such a case, ax25_connect() reaches into the uninitialized portion of the `struct sockaddr_storage` statically allocated in __sys_connect(). It is safe to remove `fsa->fsa_ax25.sax25_ndigis > AX25_MAX_DIGIS` because `addr_len` is guaranteed to be less than or equal to `sizeof(struct full_sockaddr_ax25)`. Reported-by: syzbot+c82752228ed975b0a623@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=55ef9d629f3b3d7d70b69558015b63b48d01af66 Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-22ipvs: fix the connection sync failed in some casesguodeqing
The sync_thread_backup only checks sk_receive_queue is empty or not, there is a situation which cannot sync the connection entries when sk_receive_queue is empty and sk_rmem_alloc is larger than sk_rcvbuf, the sync packets are dropped in __udp_enqueue_schedule_skb, this is because the packets in reader_queue is not read, so the rmem is not reclaimed. Here I add the check of whether the reader_queue of the udp sock is empty or not to solve this problem. Fixes: 2276f58ac589 ("udp: use a separate rx queue for packet reception") Reported-by: zhouxudong <zhouxudong8@huawei.com> Signed-off-by: guodeqing <geffrey.guo@huawei.com> Acked-by: Julian Anastasov <ja@ssi.bg> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-07-21net: udp: Fix wrong clean up for IS_UDPLITE macroMiaohe Lin
We can't use IS_UDPLITE to replace udp_sk->pcflag when UDPLITE_RECV_CC is checked. Fixes: b2bf1e2659b1 ("[UDP]: Clean up for IS_UDPLITE macro") Signed-off-by: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21net-sysfs: add a newline when printing 'tx_timeout' by sysfsXiongfeng Wang
When I cat 'tx_timeout' by sysfs, it displays as follows. It's better to add a newline for easy reading. root@syzkaller:~# cat /sys/devices/virtual/net/lo/queues/tx-0/tx_timeout 0root@syzkaller:~# Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21udp: Improve load balancing for SO_REUSEPORT.Kuniyuki Iwashima
Currently, SO_REUSEPORT does not work well if connected sockets are in a UDP reuseport group. Then reuseport_has_conns() returns true and the result of reuseport_select_sock() is discarded. Also, unconnected sockets have the same score, hence only does the first unconnected socket in udp_hslot always receive all packets sent to unconnected sockets. So, the result of reuseport_select_sock() should be used for load balancing. The noteworthy point is that the unconnected sockets placed after connected sockets in sock_reuseport.socks will receive more packets than others because of the algorithm in reuseport_select_sock(). index | connected | reciprocal_scale | result --------------------------------------------- 0 | no | 20% | 40% 1 | no | 20% | 20% 2 | yes | 20% | 0% 3 | no | 20% | 40% 4 | yes | 20% | 0% If most of the sockets are connected, this can be a problem, but it still works better than now. Fixes: acdcecc61285 ("udp: correct reuseport selection with connected sockets") CC: Willem de Bruijn <willemb@google.com> Reviewed-by: Benjamin Herrenschmidt <benh@amazon.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-21udp: Copy has_conns in reuseport_grow().Kuniyuki Iwashima
If an unconnected socket in a UDP reuseport group connect()s, has_conns is set to 1. Then, when a packet is received, udp[46]_lib_lookup2() scans all sockets in udp_hslot looking for the connected socket with the highest score. However, when the number of sockets bound to the port exceeds max_socks, reuseport_grow() resets has_conns to 0. It can cause udp[46]_lib_lookup2() to return without scanning all sockets, resulting in that packets sent to connected sockets may be distributed to unconnected sockets. Therefore, reuseport_grow() should copy has_conns. Fixes: acdcecc61285 ("udp: correct reuseport selection with connected sockets") CC: Willem de Bruijn <willemb@google.com> Reviewed-by: Benjamin Herrenschmidt <benh@amazon.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Acked-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20tipc: allow to build NACK message in link timeout functionTung Nguyen
Commit 02288248b051 ("tipc: eliminate gap indicator from ACK messages") eliminated sending of the 'gap' indicator in regular ACK messages and only allowed to build NACK message with enabled probe/probe_reply. However, necessary correction for building NACK message was missed in tipc_link_timeout() function. This leads to significant delay and link reset (due to retransmission failure) in lossy environment. This commit fixes it by setting the 'probe' flag to 'true' when the receive deferred queue is not empty. As a result, NACK message will be built to send back to another peer. Fixes: 02288248b051 ("tipc: eliminate gap indicator from ACK messages") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tung Nguyen <tung.q.nguyen@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net/sched: act_ct: fix restore the qdisc_skb_cb after defragwenxu
The fragment packets do defrag in tcf_ct_handle_fragments will clear the skb->cb which make the qdisc_skb_cb clear too. So the qdsic_skb_cb should be store before defrag and restore after that. It also update the pkt_len after all the fragments finish the defrag to one packet and make the following actions counter correct. Fixes: b57dc7c13ea9 ("net/sched: Introduce action ct") Signed-off-by: wenxu <wenxu@ucloud.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net: hsr: check for return value of skb_put_padto()Murali Karicheri
skb_put_padto() can fail. So check for return type and return NULL for skb. Caller checks for skb and acts correctly if it is NULL. Fixes: 6d6148bc78d2 ("net: hsr: fix incorrect lsdu size in the tag of HSR frames for small frames") Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net/smc: fix dmb buffer shortageKarsten Graul
There is a current limit of 1920 registered dmb buffers per ISM device for smc-d. One link group can contain 255 connections, each connection is using one dmb buffer. When the connection is closed then the registered buffer is held in a queue and is reused by the next connection. When a link group is 'full' then another link group is created and uses an own buffer pool. The link groups are added to a list using list_add() which puts a new link group to the first position in the list. In the situation that many connections are opened (>1920) and a few of them stay open while others are closed quickly we end up with at least 8 link groups. For a new connection a matching link group is looked up, iterating over the list of link groups. The trailing 7 link groups all have registered dmb buffers which could be reused, while the first link group has only a few dmb buffers and then hit the 1920 limit. Because the first link group is not full (255 connection limit not reached) it is chosen and finally the connection falls back to TCP because there is no dmb buffer available in this link group. There are multiple ways to fix that: using list_add_tail() allows to scan older link groups first for free buffers which ensures that buffers are reused first. This fixes the problem for smc-r link groups as well. For smc-d there is an even better way to address this problem because smc-d does not have the 255 connections per link group limit. So fix the problem for smc-d by allowing large link groups. Fixes: c6ba7c9ba43d ("net/smc: add base infrastructure for SMC-D and ISM") Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20net/smc: put slot when connection is killedKarsten Graul
To get a send slot smc_wr_tx_get_free_slot() is called, which might wait for a free slot. When smc_wr_tx_get_free_slot() returns there is a check if the connection was killed in the meantime. In that case don't only return an error, but also put back the free slot. Fixes: b290098092e4 ("net/smc: cancel send and receive for terminated socket") Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-20rxrpc: Fix sendmsg() returning EPIPE due to recvmsg() returning ENODATADavid Howells
rxrpc_sendmsg() returns EPIPE if there's an outstanding error, such as if rxrpc_recvmsg() indicating ENODATA if there's nothing for it to read. Change rxrpc_recvmsg() to return EAGAIN instead if there's nothing to read as this particular error doesn't get stored in ->sk_err by the networking core. Also change rxrpc_sendmsg() so that it doesn't fail with delayed receive errors (there's no way for it to report which call, if any, the error was caused by). Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: fix restoring of fallback changesKarsten Graul
When a listen socket is closed then all non-accepted sockets in its accept queue are to be released. Inside __smc_release() the helper smc_restore_fallback_changes() restores the changes done to the socket without to check if the clcsocket has a file set. This can result in a crash. Fix this by checking the file pointer first. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: f536dffc0b79 ("net/smc: fix closing of fallback SMC sockets") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: remove freed buffer from listKarsten Graul
Two buffers are allocated for each SMC connection. Each buffer is added to a buffer list after creation. When the second buffer allocation fails, the first buffer is freed but not deleted from the list. This might result in crashes when another connection picks up the freed buffer later and starts to work with it. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: 6511aad3f039 ("net/smc: change smc_buf_free function parameters") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: do not call dma sync for unmapped memoryKarsten Graul
The dma related ...sync_sg... functions check the link state before the dma function is actually called. But the check in smc_link_usable() allows links in ACTIVATING state which are not yet mapped to dma memory. Under high load it may happen that the sync_sg functions are called for such a link which results in an debug output like DMA-API: mlx5_core 0002:00:00.0: device driver tries to sync DMA memory it has not allocated [device address=0x0000000103370000] [size=65536 bytes] To fix that introduce a helper to check for the link state ACTIVE and use it where appropriate. And move the link state update to ACTIVATING to the end of smcr_link_init() when most initial setup is done. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: d854fcbfaeda ("net/smc: add new link state and related helpers") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: fix handling of delete link requestsKarsten Graul
As smc client the delete link requests are assigned to the flow when _any_ flow is active. This may break other flows that do not expect delete link requests during their handling. Fix that by assigning the request only when an add link flow is active. With that fix the code for smc client and smc server is the same, so remove the separate handling. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: 9ec6bf19ec8b ("net/smc: llc_del_link_work and use the LLC flow for delete link") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: move add link processing for new device into llc layerKarsten Graul
When a new ib device is up smc will send an add link invitation to the peer if needed. This is currently done with rudimentary flow control. Under high workload these add link invitations can disturb other llc flows because they arrive unexpected. Fix this by integrating the invitations into the normal llc event flow and handle them as a flow. While at it, check for already assigned requests in the flow before the new add link request is assigned. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: 1f90a05d9ff9 ("net/smc: add smcr_port_add() and smcr_link_up() processing") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: drop out-of-flow llc response messagesKarsten Graul
To be save from unexpected or late llc response messages check if the arrived message fits to the current flow type and drop out-of-flow messages. And drop it when there is already a response assigned to the flow. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: ef79d439cd12 ("net/smc: process llc responses in tasklet context") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: protect smc ib device initializationKarsten Graul
Before an smc ib device is used the first time for an smc link it is lazily initialized. When there are 2 active link groups and a new ib device is brought online then it might happen that 2 link creations run in parallel and enter smc_ib_setup_per_ibdev(). Both allocate new send and receive completion queues on the device, but only one set of them keeps assigned and the other leaks. Fix that by protecting the setup and cleanup code using a mutex. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: f3c1deddb21c ("net/smc: separate function for link initialization") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: fix link lookup for new rdma connectionsKarsten Graul
For new rdma connections the SMC server assigns the link and sends the link data in the clc accept message. To match the correct link use not only the qp_num but also the gid and the mac of the links. If there are equal qp_nums for different links the wrong link would be chosen. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: 0fb0b02bd6fd ("net/smc: adapt SMC client code to use the LLC flow") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: clear link during SMC client link down processingKarsten Graul
In a link-down condition we notify the SMC server and expect that the server will finally trigger the link clear processing on the client side. This could fail when anything along this notification path goes wrong. Clear the link as part of SMC client link-down processing to prevent dangling links. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: 541afa10c126 ("net/smc: add smcr_port_err() and smcr_link_down() processing") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-19net/smc: handle unexpected response types for confirm linkKarsten Graul
A delete link could arrive during confirm link processing. Handle this situation directly in smc_llc_srv_conf_link() rather than using the logic in smc_llc_wait() to avoid the unexpected message handling there. Reviewed-by: Ursula Braun <ubraun@linux.ibm.com> Fixes: 1551c95b6124 ("net/smc: final part of add link processing as SMC server") Signed-off-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-17net: hsr: validate address B before copying to skbMurali Karicheri
Validate MAC address before copying the same to outgoing frame skb destination address. Since a node can have zero mac address for Link B until a valid frame is received over that link, this fix address the issue of a zero MAC address being in the packet. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-17net: hsr: fix incorrect lsdu size in the tag of HSR frames for small framesMurali Karicheri
For small Ethernet frames with size less than minimum size 66 for HSR vs 60 for regular Ethernet frames, hsr driver currently doesn't pad the frame to make it minimum size. This results in incorrect LSDU size being populated in the HSR tag for these frames. Fix this by padding the frame to the minimum size applicable for HSR. Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-17nfc: nci: add missed destroy_workqueue in nci_register_deviceWang Hai
When nfc_register_device fails in nci_register_device, destroy_workqueue() shouled be called to destroy ndev->tx_wq. Fixes: 3c1c0f5dc80b ("NFC: NCI: Fix nci_register_device init sequence") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-17rtnetlink: Fix memory(net_device) leak when ->newlink failsWeilong Chen
When vlan_newlink call register_vlan_dev fails, it might return error with dev->reg_state = NETREG_UNREGISTERED. The rtnl_newlink should free the memory. But currently rtnl_newlink only free the memory which state is NETREG_UNINITIALIZED. BUG: memory leak unreferenced object 0xffff8881051de000 (size 4096): comm "syz-executor139", pid 560, jiffies 4294745346 (age 32.445s) hex dump (first 32 bytes): 76 6c 61 6e 32 00 00 00 00 00 00 00 00 00 00 00 vlan2........... 00 45 28 03 81 88 ff ff 00 00 00 00 00 00 00 00 .E(............. backtrace: [<0000000047527e31>] kmalloc_node include/linux/slab.h:578 [inline] [<0000000047527e31>] kvmalloc_node+0x33/0xd0 mm/util.c:574 [<000000002b59e3bc>] kvmalloc include/linux/mm.h:753 [inline] [<000000002b59e3bc>] kvzalloc include/linux/mm.h:761 [inline] [<000000002b59e3bc>] alloc_netdev_mqs+0x83/0xd90 net/core/dev.c:9929 [<000000006076752a>] rtnl_create_link+0x2c0/0xa20 net/core/rtnetlink.c:3067 [<00000000572b3be5>] __rtnl_newlink+0xc9c/0x1330 net/core/rtnetlink.c:3329 [<00000000e84ea553>] rtnl_newlink+0x66/0x90 net/core/rtnetlink.c:3397 [<0000000052c7c0a9>] rtnetlink_rcv_msg+0x540/0x990 net/core/rtnetlink.c:5460 [<000000004b5cb379>] netlink_rcv_skb+0x12b/0x3a0 net/netlink/af_netlink.c:2469 [<00000000c71c20d3>] netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] [<00000000c71c20d3>] netlink_unicast+0x4c6/0x690 net/netlink/af_netlink.c:1329 [<00000000cca72fa9>] netlink_sendmsg+0x735/0xcc0 net/netlink/af_netlink.c:1918 [<000000009221ebf7>] sock_sendmsg_nosec net/socket.c:652 [inline] [<000000009221ebf7>] sock_sendmsg+0x109/0x140 net/socket.c:672 [<000000001c30ffe4>] ____sys_sendmsg+0x5f5/0x780 net/socket.c:2352 [<00000000b71ca6f3>] ___sys_sendmsg+0x11d/0x1a0 net/socket.c:2406 [<0000000007297384>] __sys_sendmsg+0xeb/0x1b0 net/socket.c:2439 [<000000000eb29b11>] do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 [<000000006839b4d0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: cb626bf566eb ("net-sysfs: Fix reference count leak") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Weilong Chen <chenweilong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-15vsock/virtio: annotate 'the_virtio_vsock' RCU pointerStefano Garzarella
Commit 0deab087b16a ("vsock/virtio: use RCU to avoid use-after-free on the_virtio_vsock") starts to use RCU to protect 'the_virtio_vsock' pointer, but we forgot to annotate it. This patch adds the annotation to fix the following sparse errors: net/vmw_vsock/virtio_transport.c:73:17: error: incompatible types in comparison expression (different address spaces): net/vmw_vsock/virtio_transport.c:73:17: struct virtio_vsock [noderef] __rcu * net/vmw_vsock/virtio_transport.c:73:17: struct virtio_vsock * net/vmw_vsock/virtio_transport.c:171:17: error: incompatible types in comparison expression (different address spaces): net/vmw_vsock/virtio_transport.c:171:17: struct virtio_vsock [noderef] __rcu * net/vmw_vsock/virtio_transport.c:171:17: struct virtio_vsock * net/vmw_vsock/virtio_transport.c:207:17: error: incompatible types in comparison expression (different address spaces): net/vmw_vsock/virtio_transport.c:207:17: struct virtio_vsock [noderef] __rcu * net/vmw_vsock/virtio_transport.c:207:17: struct virtio_vsock * net/vmw_vsock/virtio_transport.c:561:13: error: incompatible types in comparison expression (different address spaces): net/vmw_vsock/virtio_transport.c:561:13: struct virtio_vsock [noderef] __rcu * net/vmw_vsock/virtio_transport.c:561:13: struct virtio_vsock * net/vmw_vsock/virtio_transport.c:612:9: error: incompatible types in comparison expression (different address spaces): net/vmw_vsock/virtio_transport.c:612:9: struct virtio_vsock [noderef] __rcu * net/vmw_vsock/virtio_transport.c:612:9: struct virtio_vsock * net/vmw_vsock/virtio_transport.c:631:9: error: incompatible types in comparison expression (different address spaces): net/vmw_vsock/virtio_transport.c:631:9: struct virtio_vsock [noderef] __rcu * net/vmw_vsock/virtio_transport.c:631:9: struct virtio_vsock * Fixes: 0deab087b16a ("vsock/virtio: use RCU to avoid use-after-free on the_virtio_vsock") Reported-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-07-15netfilter: nf_tables: fix nat hook table deletionFlorian Westphal
sybot came up with following transaction: add table ip syz0 add chain ip syz0 syz2 { type nat hook prerouting priority 0; policy accept; } add table ip syz0 { flags dormant; } delete chain ip syz0 syz2 delete table ip syz0 which yields: hook not found, pf 2 num 0 WARNING: CPU: 0 PID: 6775 at net/netfilter/core.c:413 __nf_unregister_net_hook+0x3e6/0x4a0 net/netfilter/core.c:413 [..] nft_unregister_basechain_hooks net/netfilter/nf_tables_api.c:206 [inline] nft_table_disable net/netfilter/nf_tables_api.c:835 [inline] nf_tables_table_disable net/netfilter/nf_tables_api.c:868 [inline] nf_tables_commit+0x32d3/0x4d70 net/netfilter/nf_tables_api.c:7550 nfnetlink_rcv_batch net/netfilter/nfnetlink.c:486 [inline] nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:544 [inline] nfnetlink_rcv+0x14a5/0x1e50 net/netfilter/nfnetlink.c:562 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] Problem is that when I added ability to override base hook registration to make nat basechains register with the nat core instead of netfilter core, I forgot to update nft_table_disable() to use that instead of the 'raw' hook register interface. In syzbot transaction, the basechain is of 'nat' type. Its registered with the nat core. The switch to 'dormant mode' attempts to delete from netfilter core instead. After updating nft_table_disable/enable to use the correct helper, nft_(un)register_basechain_hooks can be folded into the only remaining caller. Because nft_trans_table_enable() won't do anything when the DORMANT flag is set, remove the flag first, then re-add it in case re-enablement fails, else this patch breaks sequence: add table ip x { flags dormant; } /* add base chains */ add table ip x The last 'add' will remove the dormant flags, but won't have any other effect -- base chains are not registered. Then, next 'set dormant flag' will create another 'hook not found' splat. Reported-by: syzbot+2570f2c036e3da5db176@syzkaller.appspotmail.com Fixes: 4e25ceb80b58 ("netfilter: nf_tables: allow chain type to override hook register") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-07-15xprtrdma: fix incorrect header size calculationsColin Ian King
Currently the header size calculations are using an assignment operator instead of a += operator when accumulating the header size leading to incorrect sizes. Fix this by using the correct operator. Addresses-Coverity: ("Unused value") Fixes: 302d3deb2068 ("xprtrdma: Prevent inline overflow") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-07-13ip6_gre: fix null-ptr-deref in ip6gre_init_net()Wei Yongjun
KASAN report null-ptr-deref error when register_netdev() failed: KASAN: null-ptr-deref in range [0x00000000000003c0-0x00000000000003c7] CPU: 2 PID: 422 Comm: ip Not tainted 5.8.0-rc4+ #12 Call Trace: ip6gre_init_net+0x4ab/0x580 ? ip6gre_tunnel_uninit+0x3f0/0x3f0 ops_init+0xa8/0x3c0 setup_net+0x2de/0x7e0 ? rcu_read_lock_bh_held+0xb0/0xb0 ? ops_init+0x3c0/0x3c0 ? kasan_unpoison_shadow+0x33/0x40 ? __kasan_kmalloc.constprop.0+0xc2/0xd0 copy_net_ns+0x27d/0x530 create_new_namespaces+0x382/0xa30 unshare_nsproxy_namespaces+0xa1/0x1d0 ksys_unshare+0x39c/0x780 ? walk_process_tree+0x2a0/0x2a0 ? trace_hardirqs_on+0x4a/0x1b0 ? _raw_spin_unlock_irq+0x1f/0x30 ? syscall_trace_enter+0x1a7/0x330 ? do_syscall_64+0x1c/0xa0 __x64_sys_unshare+0x2d/0x40 do_syscall_64+0x56/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ip6gre_tunnel_uninit() has set 'ign->fb_tunnel_dev' to NULL, later access to ign->fb_tunnel_dev cause null-ptr-deref. Fix it by saving 'ign->fb_tunnel_dev' to local variable ndev. Fixes: dafabb6590cb ("ip6_gre: fix use-after-free in ip6gre_tunnel_lookup()") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13xprtrdma: Fix handling of connect errorsChuck Lever
Ensure that the connect worker is awoken if an attempt to establish a connection is unsuccessful. Otherwise the worker waits forever and the transport workload hangs. Connect errors should not attempt to destroy the ep, since the connect worker continues to use it after the handler runs, so these errors are now handled independently of DISCONNECTED events. Reported-by: Dan Aloni <dan@kernelim.com> Fixes: e28ce90083f0 ("xprtrdma: kmalloc rpcrdma_ep separate from rpcrdma_xprt") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-07-13xprtrdma: Fix return code from rpcrdma_xprt_connect()Chuck Lever
I noticed that when rpcrdma_xprt_connect() returns -ENOMEM, instead of retrying the connect, the RPC client kills the RPC task that requested the connection. We want a retry here. Fixes: cb586decbb88 ("xprtrdma: Make sendctx queue lifetime the same as connection lifetime") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-07-13xprtrdma: Fix recursion into rpcrdma_xprt_disconnect()Chuck Lever
Both Dan and I have observed two processes invoking rpcrdma_xprt_disconnect() concurrently. In my case: 1. The connect worker invokes rpcrdma_xprt_disconnect(), which drains the QP and waits for the final completion 2. This causes the newly posted Receive to flush and invoke xprt_force_disconnect() 3. xprt_force_disconnect() sets CLOSE_WAIT and wakes up the RPC task that is holding the transport lock 4. The RPC task invokes xprt_connect(), which calls ->ops->close 5. xprt_rdma_close() invokes rpcrdma_xprt_disconnect(), which tries to destroy the QP. Deadlock. To prevent xprt_force_disconnect() from waking anything, handle the clean up after a failed connection attempt in the xprt's sndtask. The retry loop is removed from rpcrdma_xprt_connect() to ensure that the newly allocated ep and id are properly released before a REJECTED connection attempt can be retried. Reported-by: Dan Aloni <dan@kernelim.com> Fixes: e28ce90083f0 ("xprtrdma: kmalloc rpcrdma_ep separate from rpcrdma_xprt") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-07-13xprtrdma: Fix double-free in rpcrdma_ep_create()Chuck Lever
In the error paths, there's no need to call kfree(ep) after calling rpcrdma_ep_put(ep). Fixes: e28ce90083f0 ("xprtrdma: kmalloc rpcrdma_ep separate from rpcrdma_xprt") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2020-07-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds
Pull networking fixes from David Miller: 1) Restore previous behavior of CAP_SYS_ADMIN wrt loading networking BPF programs, from Maciej Żenczykowski. 2) Fix dropped broadcasts in mac80211 code, from Seevalamuthu Mariappan. 3) Slay memory leak in nl80211 bss color attribute parsing code, from Luca Coelho. 4) Get route from skb properly in ip_route_use_hint(), from Miaohe Lin. 5) Don't allow anything other than ARPHRD_ETHER in llc code, from Eric Dumazet. 6) xsk code dips too deeply into DMA mapping implementation internals. Add dma_need_sync and use it. From Christoph Hellwig 7) Enforce power-of-2 for BPF ringbuf sizes. From Andrii Nakryiko. 8) Check for disallowed attributes when loading flow dissector BPF programs. From Lorenz Bauer. 9) Correct packet injection to L3 tunnel devices via AF_PACKET, from Jason A. Donenfeld. 10) Don't advertise checksum offload on ipa devices that don't support it. From Alex Elder. 11) Resolve several issues in TCP MD5 signature support. Missing memory barriers, bogus options emitted when using syncookies, and failure to allow md5 key changes in established states. All from Eric Dumazet. 12) Fix interface leak in hsr code, from Taehee Yoo. 13) VF reset fixes in hns3 driver, from Huazhong Tan. 14) Make loopback work again with ipv6 anycast, from David Ahern. 15) Fix TX starvation under high load in fec driver, from Tobias Waldekranz. 16) MLD2 payload lengths not checked properly in bridge multicast code, from Linus Lüssing. 17) Packet scheduler code that wants to find the inner protocol currently only works for one level of VLAN encapsulation. Allow Q-in-Q situations to work properly here, from Toke Høiland-Jørgensen. 18) Fix route leak in l2tp, from Xin Long. 19) Resolve conflict between the sk->sk_user_data usage of bpf reuseport support and various protocols. From Martin KaFai Lau. 20) Fix socket cgroup v2 reference counting in some situations, from Cong Wang. 21) Cure memory leak in mlx5 connection tracking offload support, from Eli Britstein. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (146 commits) mlxsw: pci: Fix use-after-free in case of failed devlink reload mlxsw: spectrum_router: Remove inappropriate usage of WARN_ON() net: macb: fix call to pm_runtime in the suspend/resume functions net: macb: fix macb_suspend() by removing call to netif_carrier_off() net: macb: fix macb_get/set_wol() when moving to phylink net: macb: mark device wake capable when "magic-packet" property present net: macb: fix wakeup test in runtime suspend/resume routines bnxt_en: fix NULL dereference in case SR-IOV configuration fails libbpf: Fix libbpf hashmap on (I)LP32 architectures net/mlx5e: CT: Fix memory leak in cleanup net/mlx5e: Fix port buffers cell size value net/mlx5e: Fix 50G per lane indication net/mlx5e: Fix CPU mapping after function reload to avoid aRFS RX crash net/mlx5e: Fix VXLAN configuration restore after function reload net/mlx5e: Fix usage of rcu-protected pointer net/mxl5e: Verify that rpriv is not NULL net/mlx5: E-Switch, Fix vlan or qos setting in legacy mode net/mlx5: Fix eeprom support for SFP module cgroup: Fix sock_cgroup_data on big-endian. selftests: bpf: Fix detach from sockmap tests ...
2020-07-10Merge tag 'cleanup-kernel_read_write' of git://git.infradead.org/users/hch/miscLinus Torvalds
Pull in-kernel read and write op cleanups from Christoph Hellwig: "Cleanup in-kernel read and write operations Reshuffle the (__)kernel_read and (__)kernel_write helpers, and ensure all users of in-kernel file I/O use them if they don't use iov_iter based methods already. The new WARN_ONs in combination with syzcaller already found a missing input validation in 9p. The fix should be on your way through the maintainer ASAP". [ This is prep-work for the real changes coming 5.9 ] * tag 'cleanup-kernel_read_write' of git://git.infradead.org/users/hch/misc: fs: remove __vfs_read fs: implement kernel_read using __kernel_read integrity/ima: switch to using __kernel_read fs: add a __kernel_read helper fs: remove __vfs_write fs: implement kernel_write using __kernel_write fs: check FMODE_WRITE in __kernel_write fs: unexport __kernel_write bpfilter: switch to kernel_write autofs: switch to kernel_write cachefiles: switch to kernel_write
2020-07-09Merge tag 'kallsyms_show_value-v5.8-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull kallsyms fix from Kees Cook: "Refactor kallsyms_show_value() users for correct cred. I'm not delighted by the timing of getting these changes to you, but it does fix a handful of kernel address exposures, and no one has screamed yet at the patches. Several users of kallsyms_show_value() were performing checks not during "open". Refactor everything needed to gain proper checks against file->f_cred for modules, kprobes, and bpf" * tag 'kallsyms_show_value-v5.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: selftests: kmod: Add module address visibility test bpf: Check correct cred for CAP_SYSLOG in bpf_dump_raw_ok() kprobes: Do not expose probe addresses to non-CAP_SYSLOG module: Do not expose section addresses to non-CAP_SYSLOG module: Refactor section attr into bin attribute kallsyms: Refactor kallsyms_show_value() to take cred
2020-07-09tcp: make sure listeners don't initialize congestion-control stateChristoph Paasch
syzkaller found its way into setsockopt with TCP_CONGESTION "cdg". tcp_cdg_init() does a kcalloc to store the gradients. As sk_clone_lock just copies all the memory, the allocated pointer will be copied as well, if the app called setsockopt(..., TCP_CONGESTION) on the listener. If now the socket will be destroyed before the congestion-control has properly been initialized (through a call to tcp_init_transfer), we will end up freeing memory that does not belong to that particular socket, opening the door to a double-free: [ 11.413102] ================================================================== [ 11.414181] BUG: KASAN: double-free or invalid-free in tcp_cleanup_congestion_control+0x58/0xd0 [ 11.415329] [ 11.415560] CPU: 3 PID: 4884 Comm: syz-executor.5 Not tainted 5.8.0-rc2 #80 [ 11.416544] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 [ 11.418148] Call Trace: [ 11.418534] <IRQ> [ 11.418834] dump_stack+0x7d/0xb0 [ 11.419297] print_address_description.constprop.0+0x1a/0x210 [ 11.422079] kasan_report_invalid_free+0x51/0x80 [ 11.423433] __kasan_slab_free+0x15e/0x170 [ 11.424761] kfree+0x8c/0x230 [ 11.425157] tcp_cleanup_congestion_control+0x58/0xd0 [ 11.425872] tcp_v4_destroy_sock+0x57/0x5a0 [ 11.426493] inet_csk_destroy_sock+0x153/0x2c0 [ 11.427093] tcp_v4_syn_recv_sock+0xb29/0x1100 [ 11.427731] tcp_get_cookie_sock+0xc3/0x4a0 [ 11.429457] cookie_v4_check+0x13d0/0x2500 [ 11.433189] tcp_v4_do_rcv+0x60e/0x780 [ 11.433727] tcp_v4_rcv+0x2869/0x2e10 [ 11.437143] ip_protocol_deliver_rcu+0x23/0x190 [ 11.437810] ip_local_deliver+0x294/0x350 [ 11.439566] __netif_receive_skb_one_core+0x15d/0x1a0 [ 11.441995] process_backlog+0x1b1/0x6b0 [ 11.443148] net_rx_action+0x37e/0xc40 [ 11.445361] __do_softirq+0x18c/0x61a [ 11.445881] asm_call_on_stack+0x12/0x20 [ 11.446409] </IRQ> [ 11.446716] do_softirq_own_stack+0x34/0x40 [ 11.447259] do_softirq.part.0+0x26/0x30 [ 11.447827] __local_bh_enable_ip+0x46/0x50 [ 11.448406] ip_finish_output2+0x60f/0x1bc0 [ 11.450109] __ip_queue_xmit+0x71c/0x1b60 [ 11.451861] __tcp_transmit_skb+0x1727/0x3bb0 [ 11.453789] tcp_rcv_state_process+0x3070/0x4d3a [ 11.456810] tcp_v4_do_rcv+0x2ad/0x780 [ 11.457995] __release_sock+0x14b/0x2c0 [ 11.458529] release_sock+0x4a/0x170 [ 11.459005] __inet_stream_connect+0x467/0xc80 [ 11.461435] inet_stream_connect+0x4e/0xa0 [ 11.462043] __sys_connect+0x204/0x270 [ 11.465515] __x64_sys_connect+0x6a/0xb0 [ 11.466088] do_syscall_64+0x3e/0x70 [ 11.466617] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 11.467341] RIP: 0033:0x7f56046dc469 [ 11.467844] Code: Bad RIP value. [ 11.468282] RSP: 002b:00007f5604dccdd8 EFLAGS: 00000246 ORIG_RAX: 000000000000002a [ 11.469326] RAX: ffffffffffffffda RBX: 000000000068bf00 RCX: 00007f56046dc469 [ 11.470379] RDX: 0000000000000010 RSI: 0000000020000000 RDI: 0000000000000004 [ 11.471311] RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000000 [ 11.472286] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 [ 11.473341] R13: 000000000041427c R14: 00007f5604dcd5c0 R15: 0000000000000003 [ 11.474321] [ 11.474527] Allocated by task 4884: [ 11.475031] save_stack+0x1b/0x40 [ 11.475548] __kasan_kmalloc.constprop.0+0xc2/0xd0 [ 11.476182] tcp_cdg_init+0xf0/0x150 [ 11.476744] tcp_init_congestion_control+0x9b/0x3a0 [ 11.477435] tcp_set_congestion_control+0x270/0x32f [ 11.478088] do_tcp_setsockopt.isra.0+0x521/0x1a00 [ 11.478744] __sys_setsockopt+0xff/0x1e0 [ 11.479259] __x64_sys_setsockopt+0xb5/0x150 [ 11.479895] do_syscall_64+0x3e/0x70 [ 11.480395] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 11.481097] [ 11.481321] Freed by task 4872: [ 11.481783] save_stack+0x1b/0x40 [ 11.482230] __kasan_slab_free+0x12c/0x170 [ 11.482839] kfree+0x8c/0x230 [ 11.483240] tcp_cleanup_congestion_control+0x58/0xd0 [ 11.483948] tcp_v4_destroy_sock+0x57/0x5a0 [ 11.484502] inet_csk_destroy_sock+0x153/0x2c0 [ 11.485144] tcp_close+0x932/0xfe0 [ 11.485642] inet_release+0xc1/0x1c0 [ 11.486131] __sock_release+0xc0/0x270 [ 11.486697] sock_close+0xc/0x10 [ 11.487145] __fput+0x277/0x780 [ 11.487632] task_work_run+0xeb/0x180 [ 11.488118] __prepare_exit_to_usermode+0x15a/0x160 [ 11.488834] do_syscall_64+0x4a/0x70 [ 11.489326] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Wei Wang fixed a part of these CDG-malloc issues with commit c12014440750 ("tcp: memset ca_priv data to 0 properly"). This patch here fixes the listener-scenario: We make sure that listeners setting the congestion-control through setsockopt won't initialize it (thus CDG never allocates on listeners). For those who use AF_UNSPEC to reuse a socket, tcp_disconnect() is changed to cleanup afterwards. (The issue can be reproduced at least down to v4.4.x.) Cc: Wei Wang <weiwan@google.com> Cc: Eric Dumazet <edumazet@google.com> Fixes: 2b0a8c9eee81 ("tcp: add CDG congestion control") Signed-off-by: Christoph Paasch <cpaasch@apple.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09ethtool: fix genlmsg_put() failure handling in ethnl_default_dumpit()Michal Kubecek
If the genlmsg_put() call in ethnl_default_dumpit() fails, we bail out without checking if we already have some messages in current skb like we do with ethnl_default_dump_one() failure later. Therefore if existing messages almost fill up the buffer so that there is not enough space even for netlink and genetlink header, we lose all prepared messages and return and error. Rather than duplicating the skb->len check, move the genlmsg_put(), genlmsg_cancel() and genlmsg_end() calls into ethnl_default_dump_one(). This is also more logical as all message composition will be in ethnl_default_dump_one() and only iteration logic will be left in ethnl_default_dumpit(). Fixes: 728480f12442 ("ethtool: default handlers for GET requests") Reported-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-09net_sched: fix a memory leak in atm_tc_init()Cong Wang
When tcf_block_get() fails inside atm_tc_init(), atm_tc_put() is called to release the qdisc p->link.q. But the flow->ref prevents it to do so, as the flow->ref is still zero. Fix this by moving the p->link.ref initialization before tcf_block_get(). Fixes: 6529eaba33f0 ("net: sched: introduce tcf block infractructure") Reported-and-tested-by: syzbot+d411cff6ab29cc2c311b@syzkaller.appspotmail.com Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>