| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Two more fixes (in three patches):
* ath9k_htc doesn't like QoS NDP frames, use regular ones
* hwsim: set up wmediumd for radios created later
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
For multipath routes the ONLINK flag can be specified per nexthop in
rtnh_flags or globally in rtm_flags. Update ip6_route_multipath_add
to consider the ONLINK setting coming from rtnh_flags. Each loop over
nexthops the config for the sibling route is initialized to the global
config and then per nexthop settings overlayed. The flag is 'or'ed into
fib6_config to handle the ONLINK flag coming from either rtm_flags or
rtnh_flags.
Fixes: fc1e64e1092f ("net/ipv6: Add support for onlink flag")
Signed-off-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When using seg6 in encap mode, we call ipv6_dev_get_saddr() to set the
source address of the outer IPv6 header, in case none was specified.
Using skb->dev can lead to BUG() when it is in an inconsistent state.
This patch uses the net_device attached to the skb's dst instead.
[940807.667429] BUG: unable to handle kernel NULL pointer dereference at 000000000000047c
[940807.762427] IP: ipv6_dev_get_saddr+0x8b/0x1d0
[940807.815725] PGD 0 P4D 0
[940807.847173] Oops: 0000 [#1] SMP PTI
[940807.890073] Modules linked in:
[940807.927765] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G W 4.16.0-rc1-seg6bpf+ #2
[940808.028988] Hardware name: HP ProLiant DL120 G6/ProLiant DL120 G6, BIOS O26 09/06/2010
[940808.128128] RIP: 0010:ipv6_dev_get_saddr+0x8b/0x1d0
[940808.187667] RSP: 0018:ffff88043fd836b0 EFLAGS: 00010206
[940808.251366] RAX: 0000000000000005 RBX: ffff88042cb1c860 RCX: 00000000000000fe
[940808.338025] RDX: 00000000000002c0 RSI: ffff88042cb1c860 RDI: 0000000000004500
[940808.424683] RBP: ffff88043fd83740 R08: 0000000000000000 R09: ffffffffffffffff
[940808.511342] R10: 0000000000000040 R11: 0000000000000000 R12: ffff88042cb1c850
[940808.598012] R13: ffffffff8208e380 R14: ffff88042ac8da00 R15: 0000000000000002
[940808.684675] FS: 0000000000000000(0000) GS:ffff88043fd80000(0000) knlGS:0000000000000000
[940808.783036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[940808.852975] CR2: 000000000000047c CR3: 00000004255fe000 CR4: 00000000000006e0
[940808.939634] Call Trace:
[940808.970041] <IRQ>
[940808.995250] ? ip6t_do_table+0x265/0x640
[940809.043341] seg6_do_srh_encap+0x28f/0x300
[940809.093516] ? seg6_do_srh+0x1a0/0x210
[940809.139528] seg6_do_srh+0x1a0/0x210
[940809.183462] seg6_output+0x28/0x1e0
[940809.226358] lwtunnel_output+0x3f/0x70
[940809.272370] ip6_xmit+0x2b8/0x530
[940809.313185] ? ac6_proc_exit+0x20/0x20
[940809.359197] inet6_csk_xmit+0x7d/0xc0
[940809.404173] tcp_transmit_skb+0x548/0x9a0
[940809.453304] __tcp_retransmit_skb+0x1a8/0x7a0
[940809.506603] ? ip6_default_advmss+0x40/0x40
[940809.557824] ? tcp_current_mss+0x24/0x90
[940809.605925] tcp_retransmit_skb+0xd/0x80
[940809.654016] tcp_xmit_retransmit_queue.part.17+0xf9/0x210
[940809.719797] tcp_ack+0xa47/0x1110
[940809.760612] tcp_rcv_established+0x13c/0x570
[940809.812865] tcp_v6_do_rcv+0x151/0x3d0
[940809.858879] tcp_v6_rcv+0xa5c/0xb10
[940809.901770] ? seg6_output+0xdd/0x1e0
[940809.946745] ip6_input_finish+0xbb/0x460
[940809.994837] ip6_input+0x74/0x80
[940810.034612] ? ip6_rcv_finish+0xb0/0xb0
[940810.081663] ipv6_rcv+0x31c/0x4c0
...
Fixes: 6c8702c60b886 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Reported-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David Lebrun <dlebrun@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The seg6_build_state() function is called with RCU read lock held,
so we cannot use GFP_KERNEL. This patch uses GFP_ATOMIC instead.
[ 92.770271] =============================
[ 92.770628] WARNING: suspicious RCU usage
[ 92.770921] 4.16.0-rc4+ #12 Not tainted
[ 92.771277] -----------------------------
[ 92.771585] ./include/linux/rcupdate.h:302 Illegal context switch in RCU read-side critical section!
[ 92.772279]
[ 92.772279] other info that might help us debug this:
[ 92.772279]
[ 92.773067]
[ 92.773067] rcu_scheduler_active = 2, debug_locks = 1
[ 92.773514] 2 locks held by ip/2413:
[ 92.773765] #0: (rtnl_mutex){+.+.}, at: [<00000000e5461720>] rtnetlink_rcv_msg+0x441/0x4d0
[ 92.774377] #1: (rcu_read_lock){....}, at: [<00000000df4f161e>] lwtunnel_build_state+0x59/0x210
[ 92.775065]
[ 92.775065] stack backtrace:
[ 92.775371] CPU: 0 PID: 2413 Comm: ip Not tainted 4.16.0-rc4+ #12
[ 92.775791] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1.fc27 04/01/2014
[ 92.776608] Call Trace:
[ 92.776852] dump_stack+0x7d/0xbc
[ 92.777130] __schedule+0x133/0xf00
[ 92.777393] ? unwind_get_return_address_ptr+0x50/0x50
[ 92.777783] ? __sched_text_start+0x8/0x8
[ 92.778073] ? rcu_is_watching+0x19/0x30
[ 92.778383] ? kernel_text_address+0x49/0x60
[ 92.778800] ? __kernel_text_address+0x9/0x30
[ 92.779241] ? unwind_get_return_address+0x29/0x40
[ 92.779727] ? pcpu_alloc+0x102/0x8f0
[ 92.780101] _cond_resched+0x23/0x50
[ 92.780459] __mutex_lock+0xbd/0xad0
[ 92.780818] ? pcpu_alloc+0x102/0x8f0
[ 92.781194] ? seg6_build_state+0x11d/0x240
[ 92.781611] ? save_stack+0x9b/0xb0
[ 92.781965] ? __ww_mutex_wakeup_for_backoff+0xf0/0xf0
[ 92.782480] ? seg6_build_state+0x11d/0x240
[ 92.782925] ? lwtunnel_build_state+0x1bd/0x210
[ 92.783393] ? ip6_route_info_create+0x687/0x1640
[ 92.783846] ? ip6_route_add+0x74/0x110
[ 92.784236] ? inet6_rtm_newroute+0x8a/0xd0
Fixes: 6c8702c60b886 ("ipv6: sr: add support for SRH encapsulation and injection with lwtunnels")
Signed-off-by: David Lebrun <dlebrun@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Simon Wunderlich says:
====================
Here are some batman-adv bugfixes:
- fix possible IPv6 packet loss when multicast extension is used, by Linus Luessing
- fix SKB handling issues for TTVN and DAT, by Matthias Schiffer (two patches)
- fix include for eventpoll, by Sven Eckelmann
- fix skb checksum for ttvn reroutes, by Sven Eckelmann
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcf_skbmod_init() can fail after the idr has been successfully reserved.
When this happens, every subsequent attempt to configure skbmod rules
using the same idr value will systematically fail with -ENOSPC, unless
the first attempt was done using the 'replace' keyword:
# tc action add action skbmod swap mac index 100
RTNETLINK answers: Cannot allocate memory
We have an error talking to the kernel
# tc action add action skbmod swap mac index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
# tc action add action skbmod swap mac index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
...
Fix this in tcf_skbmod_init(), ensuring that tcf_idr_release() is called
on the error path when the idr has been reserved, but not yet inserted.
Also, don't test 'ovr' in the error path, to avoid a 'replace' failure
implicitly become a 'delete' that leaks refcount in act_skbmod module:
# rmmod act_skbmod; modprobe act_skbmod
# tc action add action skbmod swap mac index 100
# tc action add action skbmod swap mac continue index 100
RTNETLINK answers: File exists
We have an error talking to the kernel
# tc action replace action skbmod swap mac continue index 100
RTNETLINK answers: Cannot allocate memory
We have an error talking to the kernel
# tc action list action skbmod
#
# rmmod act_skbmod
rmmod: ERROR: Module act_skbmod is in use
Fixes: 65a206c01e8e ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcf_vlan_init() can fail after the idr has been successfully reserved.
When this happens, every subsequent attempt to configure vlan rules using
the same idr value will systematically fail with -ENOSPC, unless the first
attempt was done using the 'replace' keyword.
# tc action add action vlan pop index 100
RTNETLINK answers: Cannot allocate memory
We have an error talking to the kernel
# tc action add action vlan pop index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
# tc action add action vlan pop index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
...
Fix this in tcf_vlan_init(), ensuring that tcf_idr_release() is called on
the error path when the idr has been reserved, but not yet inserted. Also,
don't test 'ovr' in the error path, to avoid a 'replace' failure implicitly
become a 'delete' that leaks refcount in act_vlan module:
# rmmod act_vlan; modprobe act_vlan
# tc action add action vlan push id 5 index 100
# tc action replace action vlan push id 7 index 100
RTNETLINK answers: Cannot allocate memory
We have an error talking to the kernel
# tc action list action vlan
#
# rmmod act_vlan
rmmod: ERROR: Module act_vlan is in use
Fixes: 4c5b9d9642c8 ("act_vlan: VLAN action rewrite to use RCU lock/unlock and update")
Fixes: 65a206c01e8e ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
__tcf_ipt_init() can fail after the idr has been successfully reserved.
When this happens, subsequent attempts to configure xt/ipt rules using
the same idr value systematically fail with -ENOSPC:
# tc action add action xt -j LOG --log-prefix test1 index 100
tablename: mangle hook: NF_IP_POST_ROUTING
target: LOG level warning prefix "test1" index 100
RTNETLINK answers: Cannot allocate memory
We have an error talking to the kernel
Command "(null)" is unknown, try "tc actions help".
# tc action add action xt -j LOG --log-prefix test1 index 100
tablename: mangle hook: NF_IP_POST_ROUTING
target: LOG level warning prefix "test1" index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
Command "(null)" is unknown, try "tc actions help".
# tc action add action xt -j LOG --log-prefix test1 index 100
tablename: mangle hook: NF_IP_POST_ROUTING
target: LOG level warning prefix "test1" index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
...
Fix this in the error path of __tcf_ipt_init(), calling tcf_idr_release()
in place of tcf_idr_cleanup(). Since tcf_ipt_release() can now be called
when tcfi_t is NULL, we also need to protect calls to ipt_destroy_target()
to avoid NULL pointer dereference.
Fixes: 65a206c01e8e ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcf_pedit_init() can fail to allocate 'keys' after the idr has been
successfully reserved. When this happens, subsequent attempts to configure
a pedit rule using the same idr value systematically fail with -ENOSPC:
# tc action add action pedit munge ip ttl set 63 index 100
RTNETLINK answers: Cannot allocate memory
We have an error talking to the kernel
# tc action add action pedit munge ip ttl set 63 index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
# tc action add action pedit munge ip ttl set 63 index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
...
Fix this in the error path of tcf_act_pedit_init(), calling
tcf_idr_release() in place of tcf_idr_cleanup().
Fixes: 65a206c01e8e ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
tcf_act_police_init() can fail after the idr has been successfully
reserved (e.g., qdisc_get_rtab() may return NULL). When this happens,
subsequent attempts to configure a police rule using the same idr value
systematiclly fail with -ENOSPC:
# tc action add action police rate 1000 burst 1000 drop index 100
RTNETLINK answers: Cannot allocate memory
We have an error talking to the kernel
# tc action add action police rate 1000 burst 1000 drop index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
# tc action add action police rate 1000 burst 1000 drop index 100
RTNETLINK answers: No space left on device
...
Fix this in the error path of tcf_act_police_init(), calling
tcf_idr_release() in place of tcf_idr_cleanup().
Fixes: 65a206c01e8e ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
if the kernel fails to duplicate 'sdata', creation of a new action fails
with -ENOMEM. However, subsequent attempts to install the same action
using the same value of 'index' systematically fail with -ENOSPC, and
that value of 'index' will no more be usable by act_simple, until rmmod /
insmod of act_simple.ko is done:
# tc actions add action simple sdata hello index 100
# tc actions list action simple
action order 0: Simple <hello>
index 100 ref 1 bind 0
# tc actions flush action simple
# tc actions add action simple sdata hello index 100
RTNETLINK answers: Cannot allocate memory
We have an error talking to the kernel
# tc actions flush action simple
# tc actions add action simple sdata hello index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
# tc actions add action simple sdata hello index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
...
Fix this in the error path of tcf_simp_init(), calling tcf_idr_release()
in place of tcf_idr_cleanup().
Fixes: 65a206c01e8e ("net/sched: Change act_api and act_xxx modules to use IDR")
Suggested-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
when the following command sequence is entered
# tc action add action bpf bytecode '4,40 0 0 12,31 0 1 2048,6 0 0 262144,6 0 0 0' index 100
RTNETLINK answers: Invalid argument
We have an error talking to the kernel
# tc action add action bpf bytecode '4,40 0 0 12,21 0 1 2048,6 0 0 262144,6 0 0 0' index 100
RTNETLINK answers: No space left on device
We have an error talking to the kernel
act_bpf correctly refuses to install the first TC rule, because 31 is not
a valid instruction. However, it refuses to install the second TC rule,
even if the BPF code is correct. Furthermore, it's no more possible to
install any other rule having the same value of 'index' until act_bpf
module is unloaded/inserted again. After the idr has been reserved, call
tcf_idr_release() instead of tcf_idr_cleanup(), to fix this issue.
Fixes: 65a206c01e8e ("net/sched: Change act_api and act_xxx modules to use IDR")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Commit 7b6ddeaf27ec ("mac80211: use QoS NDP for AP probing") added an
argument qos_ok to ieee80211_nullfunc_get to support QoS NDP. Despite
the claim in the commit log "Change all the drivers to *not* allow
QoS NDP for now, even though it looks like most of them should be OK
with that", this commit enables QoS NDP in response to beacons (see
change to mlme.c:ieee80211_send_nullfunc), causing ath9k_htc to lose
IP connectivity. See:
https://patchwork.kernel.org/patch/10241109/
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=891060
Introduce a hardware flag to allow such buggy drivers to override the
correct default behaviour of mac80211 of sending QoS NDP packets.
Signed-off-by: Ben Caradoc-Davies <ben@transient.nz>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
|
|
Fixes: 2f987a76a977 ("net: ipv6: keep sk status consistent after datagram connect failure")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The current code performs unneeded free. Remove the redundant skb freeing
during the error path.
Fixes: 1555d204e743 ("devlink: Support for pipeline debug (dpipe)")
Signed-off-by: Arkadi Sharshevsky <arkadis@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
batadv_check_unicast_ttvn may redirect a packet to itself or another
originator. This involves rewriting the ttvn and the destination address in
the batadv unicast header. These field were not yet pulled (with skb rcsum
update) and thus any change to them also requires a change in the receive
checksum.
Reported-by: Matthias Schiffer <mschiffer@universe-factory.net>
Fixes: a73105b8d4c7 ("batman-adv: improved client announcement mechanism")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
Fixes: a9a08845e9ac ("vfs: do bulk POLL* -> EPOLL* replacement")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
when the following command
# tc action replace action skbmod swap mac index 100
is run for the first time, and tcf_skbmod_init() fails to allocate struct
tcf_skbmod_params, tcf_skbmod_cleanup() calls kfree_rcu(NULL), thus
causing the following error:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
IP: __call_rcu+0x23/0x2b0
PGD 8000000034057067 P4D 8000000034057067 PUD 74937067 PMD 0
Oops: 0002 [#1] SMP PTI
Modules linked in: act_skbmod(E) psample ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec crct10dif_pclmul mbcache jbd2 crc32_pclmul snd_hda_core ghash_clmulni_intel snd_hwdep pcbc snd_seq snd_seq_device snd_pcm aesni_intel snd_timer crypto_simd glue_helper snd cryptd virtio_balloon joydev soundcore pcspkr i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm virtio_console virtio_net virtio_blk ata_piix libata crc32c_intel virtio_pci serio_raw virtio_ring virtio i2c_core floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_skbmod]
CPU: 3 PID: 3144 Comm: tc Tainted: G E 4.16.0-rc4.act_vlan.orig+ #403
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:__call_rcu+0x23/0x2b0
RSP: 0018:ffffbd2e403e7798 EFLAGS: 00010246
RAX: ffffffffc0872080 RBX: ffff981d34bff780 RCX: 00000000ffffffff
RDX: ffffffff922a5f00 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000000021f
R10: 000000003d003000 R11: 0000000000aaaaaa R12: 0000000000000000
R13: ffffffff922a5f00 R14: 0000000000000001 R15: ffff981d3b698c2c
FS: 00007f3678292740(0000) GS:ffff981d3fd80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000008 CR3: 000000007c57a006 CR4: 00000000001606e0
Call Trace:
__tcf_idr_release+0x79/0xf0
tcf_skbmod_init+0x1d1/0x210 [act_skbmod]
tcf_action_init_1+0x2cc/0x430
tcf_action_init+0xd3/0x1b0
tc_ctl_action+0x18b/0x240
rtnetlink_rcv_msg+0x29c/0x310
? _cond_resched+0x15/0x30
? __kmalloc_node_track_caller+0x1b9/0x270
? rtnl_calcit.isra.28+0x100/0x100
netlink_rcv_skb+0xd2/0x110
netlink_unicast+0x17c/0x230
netlink_sendmsg+0x2cd/0x3c0
sock_sendmsg+0x30/0x40
___sys_sendmsg+0x27a/0x290
? filemap_map_pages+0x34a/0x3a0
? __handle_mm_fault+0xbfd/0xe20
__sys_sendmsg+0x51/0x90
do_syscall_64+0x6e/0x1a0
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x7f36776a3ba0
RSP: 002b:00007fff4703b618 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007fff4703b740 RCX: 00007f36776a3ba0
RDX: 0000000000000000 RSI: 00007fff4703b690 RDI: 0000000000000003
RBP: 000000005aaaba36 R08: 0000000000000002 R09: 0000000000000000
R10: 00007fff4703b0a0 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fff4703b754 R14: 0000000000000001 R15: 0000000000669f60
Code: 5d e9 42 da ff ff 66 90 0f 1f 44 00 00 41 57 41 56 41 55 49 89 d5 41 54 55 48 89 fd 53 48 83 ec 08 40 f6 c7 07 0f 85 19 02 00 00 <48> 89 75 08 48 c7 45 00 00 00 00 00 9c 58 0f 1f 44 00 00 49 89
RIP: __call_rcu+0x23/0x2b0 RSP: ffffbd2e403e7798
CR2: 0000000000000008
Fix it in tcf_skbmod_cleanup(), ensuring that kfree_rcu(p, ...) is called
only when p is not NULL.
Fixes: 86da71b57383 ("net_sched: Introduce skbmod action")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
when the following command
# tc action add action sample rate 100 group 100 index 100
is run for the first time, and psample_group_get(100) fails to create a
new group, tcf_sample_cleanup() calls psample_group_put(NULL), thus
causing the following error:
BUG: unable to handle kernel NULL pointer dereference at 000000000000001c
IP: psample_group_put+0x15/0x71 [psample]
PGD 8000000075775067 P4D 8000000075775067 PUD 7453c067 PMD 0
Oops: 0002 [#1] SMP PTI
Modules linked in: act_sample(E) psample ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hda_core mbcache jbd2 crct10dif_pclmul snd_hwdep crc32_pclmul snd_seq ghash_clmulni_intel pcbc snd_seq_device snd_pcm aesni_intel crypto_simd snd_timer glue_helper snd cryptd joydev pcspkr i2c_piix4 soundcore virtio_balloon nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm virtio_net ata_piix virtio_console virtio_blk libata serio_raw crc32c_intel virtio_pci i2c_core virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_tunnel_key]
CPU: 2 PID: 5740 Comm: tc Tainted: G E 4.16.0-rc4.act_vlan.orig+ #403
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:psample_group_put+0x15/0x71 [psample]
RSP: 0018:ffffb8a80032f7d0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000024
RDX: 0000000000000001 RSI: 0000000000000000 RDI: ffffffffc06d93c0
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
R10: 00000000bd003000 R11: ffff979fba04aa59 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: ffff979fbba3f22c
FS: 00007f7638112740(0000) GS:ffff979fbfd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000000000001c CR3: 00000000734ea001 CR4: 00000000001606e0
Call Trace:
__tcf_idr_release+0x79/0xf0
tcf_sample_init+0x125/0x1d0 [act_sample]
tcf_action_init_1+0x2cc/0x430
tcf_action_init+0xd3/0x1b0
tc_ctl_action+0x18b/0x240
rtnetlink_rcv_msg+0x29c/0x310
? _cond_resched+0x15/0x30
? __kmalloc_node_track_caller+0x1b9/0x270
? rtnl_calcit.isra.28+0x100/0x100
netlink_rcv_skb+0xd2/0x110
netlink_unicast+0x17c/0x230
netlink_sendmsg+0x2cd/0x3c0
sock_sendmsg+0x30/0x40
___sys_sendmsg+0x27a/0x290
? filemap_map_pages+0x34a/0x3a0
? __handle_mm_fault+0xbfd/0xe20
__sys_sendmsg+0x51/0x90
do_syscall_64+0x6e/0x1a0
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x7f7637523ba0
RSP: 002b:00007fff0473ef58 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007fff0473f080 RCX: 00007f7637523ba0
RDX: 0000000000000000 RSI: 00007fff0473efd0 RDI: 0000000000000003
RBP: 000000005aaaac80 R08: 0000000000000002 R09: 0000000000000000
R10: 00007fff0473e9e0 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fff0473f094 R14: 0000000000000001 R15: 0000000000669f60
Code: be 02 00 00 00 48 89 df e8 a9 fe ff ff e9 7c ff ff ff 0f 1f 40 00 0f 1f 44 00 00 53 48 89 fb 48 c7 c7 c0 93 6d c0 e8 db 20 8c ef <83> 6b 1c 01 74 10 48 c7 c7 c0 93 6d c0 ff 14 25 e8 83 83 b0 5b
RIP: psample_group_put+0x15/0x71 [psample] RSP: ffffb8a80032f7d0
CR2: 000000000000001c
Fix it in tcf_sample_cleanup(), ensuring that calls to psample_group_put(p)
are done only when p is not NULL.
Fixes: cadb9c9fdbc6 ("net/sched: act_sample: Fix error path in init")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
when the following command
# tc action add action tunnel_key unset index 100
is run for the first time, and tunnel_key_init() fails to allocate struct
tcf_tunnel_key_params, tunnel_key_release() dereferences NULL pointers.
This causes the following error:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
IP: tunnel_key_release+0xd/0x40 [act_tunnel_key]
PGD 8000000033787067 P4D 8000000033787067 PUD 74646067 PMD 0
Oops: 0000 [#1] SMP PTI
Modules linked in: act_tunnel_key(E) act_csum ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache jbd2 crct10dif_pclmul crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel snd_hda_intel pcbc snd_hda_codec snd_hda_core snd_hwdep snd_seq aesni_intel snd_seq_device crypto_simd glue_helper snd_pcm cryptd joydev snd_timer pcspkr virtio_balloon snd i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_net virtio_blk drm virtio_console crc32c_intel ata_piix serio_raw i2c_core virtio_pci libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CPU: 2 PID: 3101 Comm: tc Tainted: G E 4.16.0-rc4.act_vlan.orig+ #403
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tunnel_key_release+0xd/0x40 [act_tunnel_key]
RSP: 0018:ffffba46803b7768 EFLAGS: 00010286
RAX: ffffffffc09010a0 RBX: 0000000000000000 RCX: 0000000000000024
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff99ee336d7480
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
R10: 0000000000000220 R11: ffff99ee79d73131 R12: 0000000000000000
R13: ffff99ee32d67610 R14: ffff99ee7671dc38 R15: 00000000fffffff4
FS: 00007febcb2cd740(0000) GS:ffff99ee7fd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 000000007c8e4005 CR4: 00000000001606e0
Call Trace:
__tcf_idr_release+0x79/0xf0
tunnel_key_init+0xd9/0x460 [act_tunnel_key]
tcf_action_init_1+0x2cc/0x430
tcf_action_init+0xd3/0x1b0
tc_ctl_action+0x18b/0x240
rtnetlink_rcv_msg+0x29c/0x310
? _cond_resched+0x15/0x30
? __kmalloc_node_track_caller+0x1b9/0x270
? rtnl_calcit.isra.28+0x100/0x100
netlink_rcv_skb+0xd2/0x110
netlink_unicast+0x17c/0x230
netlink_sendmsg+0x2cd/0x3c0
sock_sendmsg+0x30/0x40
___sys_sendmsg+0x27a/0x290
__sys_sendmsg+0x51/0x90
do_syscall_64+0x6e/0x1a0
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x7febca6deba0
RSP: 002b:00007ffe7b0dd128 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007ffe7b0dd250 RCX: 00007febca6deba0
RDX: 0000000000000000 RSI: 00007ffe7b0dd1a0 RDI: 0000000000000003
RBP: 000000005aaa90cb R08: 0000000000000002 R09: 0000000000000000
R10: 00007ffe7b0dcba0 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffe7b0dd264 R14: 0000000000000001 R15: 0000000000669f60
Code: 44 00 00 8b 0d b5 23 00 00 48 8b 87 48 10 00 00 48 8b 3c c8 e9 a5 e5 d8 c3 0f 1f 44 00 00 0f 1f 44 00 00 53 48 8b 9f b0 00 00 00 <83> 7b 10 01 74 0b 48 89 df 31 f6 5b e9 f2 fa 7f c3 48 8b 7b 18
RIP: tunnel_key_release+0xd/0x40 [act_tunnel_key] RSP: ffffba46803b7768
CR2: 0000000000000010
Fix this in tunnel_key_release(), ensuring 'param' is not NULL before
dereferencing it.
Fixes: d0f6dd8a914f ("net/sched: Introduce act_tunnel_key")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
when the following command
# tc action add action csum udp continue index 100
is run for the first time, and tcf_csum_init() fails allocating struct
tcf_csum, tcf_csum_cleanup() calls kfree_rcu(NULL,...). This causes the
following error:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
IP: __call_rcu+0x23/0x2b0
PGD 80000000740b4067 P4D 80000000740b4067 PUD 32e7f067 PMD 0
Oops: 0002 [#1] SMP PTI
Modules linked in: act_csum(E) act_vlan ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache jbd2 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_generic pcbc snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm snd_timer aesni_intel crypto_simd glue_helper cryptd snd joydev pcspkr virtio_balloon i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_blk drm virtio_net virtio_console ata_piix crc32c_intel libata virtio_pci serio_raw i2c_core virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_vlan]
CPU: 2 PID: 5763 Comm: tc Tainted: G E 4.16.0-rc4.act_vlan.orig+ #403
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:__call_rcu+0x23/0x2b0
RSP: 0018:ffffb275803e77c0 EFLAGS: 00010246
RAX: ffffffffc057b080 RBX: ffff9674bc6f5240 RCX: 00000000ffffffff
RDX: ffffffff928a5f00 RSI: 0000000000000008 RDI: 0000000000000008
RBP: 0000000000000008 R08: 0000000000000001 R09: 0000000000000044
R10: 0000000000000220 R11: ffff9674b9ab4821 R12: 0000000000000000
R13: ffffffff928a5f00 R14: 0000000000000000 R15: 0000000000000001
FS: 00007fa6368d8740(0000) GS:ffff9674bfd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000010 CR3: 0000000073dec001 CR4: 00000000001606e0
Call Trace:
__tcf_idr_release+0x79/0xf0
tcf_csum_init+0xfb/0x180 [act_csum]
tcf_action_init_1+0x2cc/0x430
tcf_action_init+0xd3/0x1b0
tc_ctl_action+0x18b/0x240
rtnetlink_rcv_msg+0x29c/0x310
? _cond_resched+0x15/0x30
? __kmalloc_node_track_caller+0x1b9/0x270
? rtnl_calcit.isra.28+0x100/0x100
netlink_rcv_skb+0xd2/0x110
netlink_unicast+0x17c/0x230
netlink_sendmsg+0x2cd/0x3c0
sock_sendmsg+0x30/0x40
___sys_sendmsg+0x27a/0x290
? filemap_map_pages+0x34a/0x3a0
? __handle_mm_fault+0xbfd/0xe20
__sys_sendmsg+0x51/0x90
do_syscall_64+0x6e/0x1a0
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x7fa635ce9ba0
RSP: 002b:00007ffc185b0fc8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007ffc185b10f0 RCX: 00007fa635ce9ba0
RDX: 0000000000000000 RSI: 00007ffc185b1040 RDI: 0000000000000003
RBP: 000000005aaa85e0 R08: 0000000000000002 R09: 0000000000000000
R10: 00007ffc185b0a20 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffc185b1104 R14: 0000000000000001 R15: 0000000000669f60
Code: 5d e9 42 da ff ff 66 90 0f 1f 44 00 00 41 57 41 56 41 55 49 89 d5 41 54 55 48 89 fd 53 48 83 ec 08 40 f6 c7 07 0f 85 19 02 00 00 <48> 89 75 08 48 c7 45 00 00 00 00 00 9c 58 0f 1f 44 00 00 49 89
RIP: __call_rcu+0x23/0x2b0 RSP: ffffb275803e77c0
CR2: 0000000000000010
fix this in tcf_csum_cleanup(), ensuring that kfree_rcu(param, ...) is
called only when param is not NULL.
Fixes: 9c5f69bbd75a ("net/sched: act_csum: don't use spinlock in the fast path")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
when the following command
# tc actions replace action vlan pop index 100
is run for the first time, and tcf_vlan_init() fails allocating struct
tcf_vlan_params, tcf_vlan_cleanup() calls kfree_rcu(NULL, ...). This causes
the following error:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000018
IP: __call_rcu+0x23/0x2b0
PGD 80000000760a2067 P4D 80000000760a2067 PUD 742c1067 PMD 0
Oops: 0002 [#1] SMP PTI
Modules linked in: act_vlan(E) ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic snd_hda_intel mbcache snd_hda_codec jbd2 snd_hda_core crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc snd_hwdep snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd snd_timer glue_helper snd cryptd joydev soundcore virtio_balloon pcspkr i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm virtio_console virtio_blk virtio_net ata_piix crc32c_intel libata virtio_pci i2c_core virtio_ring serio_raw virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_vlan]
CPU: 3 PID: 3119 Comm: tc Tainted: G E 4.16.0-rc4.act_vlan.orig+ #403
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:__call_rcu+0x23/0x2b0
RSP: 0018:ffffaac3005fb798 EFLAGS: 00010246
RAX: ffffffffc0704080 RBX: ffff97f2b4bbe900 RCX: 00000000ffffffff
RDX: ffffffffabca5f00 RSI: 0000000000000010 RDI: 0000000000000010
RBP: 0000000000000010 R08: 0000000000000001 R09: 0000000000000044
R10: 00000000fd003000 R11: ffff97f2faab5b91 R12: 0000000000000000
R13: ffffffffabca5f00 R14: ffff97f2fb80202c R15: 00000000fffffff4
FS: 00007f68f75b4740(0000) GS:ffff97f2ffd80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000018 CR3: 0000000072b52001 CR4: 00000000001606e0
Call Trace:
__tcf_idr_release+0x79/0xf0
tcf_vlan_init+0x168/0x270 [act_vlan]
tcf_action_init_1+0x2cc/0x430
tcf_action_init+0xd3/0x1b0
tc_ctl_action+0x18b/0x240
rtnetlink_rcv_msg+0x29c/0x310
? _cond_resched+0x15/0x30
? __kmalloc_node_track_caller+0x1b9/0x270
? rtnl_calcit.isra.28+0x100/0x100
netlink_rcv_skb+0xd2/0x110
netlink_unicast+0x17c/0x230
netlink_sendmsg+0x2cd/0x3c0
sock_sendmsg+0x30/0x40
___sys_sendmsg+0x27a/0x290
? filemap_map_pages+0x34a/0x3a0
? __handle_mm_fault+0xbfd/0xe20
__sys_sendmsg+0x51/0x90
do_syscall_64+0x6e/0x1a0
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x7f68f69c5ba0
RSP: 002b:00007fffd79c1118 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007fffd79c1240 RCX: 00007f68f69c5ba0
RDX: 0000000000000000 RSI: 00007fffd79c1190 RDI: 0000000000000003
RBP: 000000005aaa708e R08: 0000000000000002 R09: 0000000000000000
R10: 00007fffd79c0ba0 R11: 0000000000000246 R12: 0000000000000000
R13: 00007fffd79c1254 R14: 0000000000000001 R15: 0000000000669f60
Code: 5d e9 42 da ff ff 66 90 0f 1f 44 00 00 41 57 41 56 41 55 49 89 d5 41 54 55 48 89 fd 53 48 83 ec 08 40 f6 c7 07 0f 85 19 02 00 00 <48> 89 75 08 48 c7 45 00 00 00 00 00 9c 58 0f 1f 44 00 00 49 89
RIP: __call_rcu+0x23/0x2b0 RSP: ffffaac3005fb798
CR2: 0000000000000018
fix this in tcf_vlan_cleanup(), ensuring that kfree_rcu(p, ...) is called
only when p is not NULL.
Fixes: 4c5b9d9642c8 ("act_vlan: VLAN action rewrite to use RCU lock/unlock and update")
Acked-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Manish Kurup <manish.kurup@verizon.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
syzbot reported one use-after-free in pfifo_fast_enqueue() [1]
Issue here is that we can not reuse skb after a successful skb_array_produce()
since another cpu might have consumed it already.
I believe a similar problem exists in try_bulk_dequeue_skb_slow()
in case we put an skb into qdisc_enqueue_skb_bad_txq() for lockless qdisc.
[1]
BUG: KASAN: use-after-free in qdisc_pkt_len include/net/sch_generic.h:610 [inline]
BUG: KASAN: use-after-free in qdisc_qstats_cpu_backlog_inc include/net/sch_generic.h:712 [inline]
BUG: KASAN: use-after-free in pfifo_fast_enqueue+0x4bc/0x5e0 net/sched/sch_generic.c:639
Read of size 4 at addr ffff8801cede37e8 by task syzkaller717588/5543
CPU: 1 PID: 5543 Comm: syzkaller717588 Not tainted 4.16.0-rc4+ #265
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x24d lib/dump_stack.c:53
print_address_description+0x73/0x250 mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report+0x23c/0x360 mm/kasan/report.c:412
__asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:432
qdisc_pkt_len include/net/sch_generic.h:610 [inline]
qdisc_qstats_cpu_backlog_inc include/net/sch_generic.h:712 [inline]
pfifo_fast_enqueue+0x4bc/0x5e0 net/sched/sch_generic.c:639
__dev_xmit_skb net/core/dev.c:3216 [inline]
Fixes: c5ad119fb6c0 ("net: sched: pfifo_fast use skb_array")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot+ed43b6903ab968b16f54@syzkaller.appspotmail.com
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Jiri Pirko <jiri@resnulli.us>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Checking for 0 is insufficient: when an SKB without a batadv header, but
with a VLAN header is received, hdr_size will be 4, making the following
code interpret the Ethernet header as a batadv header.
Fixes: be1db4f6615b ("batman-adv: make the Distributed ARP Table vlan aware")
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
batadv_check_unicast_ttvn() calls skb_cow(), so pointers into the SKB data
must be (re)set after calling it. The ethhdr variable is dropped
altogether.
Fixes: 7cdcf6dddc42 ("batman-adv: add UNICAST_4ADDR packet type")
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
|
|
When errors are enqueued to the error queue via sock_queue_err_skb()
function, it is possible that the waiting application is not notified.
Calling 'sk->sk_data_ready()' would not notify applications that
selected only POLLERR events in poll() (for example).
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Randy E. Witt <randy.e.witt@intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
nlmsg_multicast() consumes always the skb, thus the original skb must be
freed only when this function is called with a clone.
Fixes: cb9f7a9a5c96 ("netlink: ensure to loop over all netns in genlmsg_multicast_allns()")
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Free memory by calling put_device(), if afiucv_iucv_init is not
successful.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com>
Signed-off-by: Julian Wiedmann <jwi@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Need to lock lower socket in order to provide mutual exclusion
with kcm_unattach.
v2: Add Reported-by for syzbot
Fixes: ab7ac4eb9832e32a09f4e804 ("kcm: Kernel Connection Multiplexor module")
Reported-by: syzbot+ea75c0ffcd353d32515f064aaebefc5279e6161e@syzkaller.appspotmail.com
Signed-off-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
With reorder header off, received packets are untagged in skb_vlan_untag()
called from within __netif_receive_skb_core(), and later the tag will be
inserted back in vlan_do_receive().
This caused out of order vlan headers when we create a vlan device on top
of another vlan device, because vlan_do_receive() inserts a tag as the
outermost vlan tag. E.g. the outer tag is first removed in skb_vlan_untag()
and inserted back in vlan_do_receive(), then the inner tag is next removed
and inserted back as the outermost tag.
This patch fixes the behaviour by inserting the inner tag at the right
position.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When we have a bridge with vlan_filtering on and a vlan device on top of
it, packets would be corrupted in skb_vlan_untag() called from
br_dev_xmit().
The problem sits in skb_reorder_vlan_header() used in skb_vlan_untag(),
which makes use of skb->mac_len. In this function mac_len is meant for
handling rx path with vlan devices with reorder_header disabled, but in
tx path mac_len is typically 0 and cannot be used, which is the problem
in this case.
The current code even does not properly handle rx path (skb_vlan_untag()
called from __netif_receive_skb_core()) with reorder_header off actually.
In rx path single tag case, it works as follows:
- Before skb_reorder_vlan_header()
mac_header data
v v
+-------------------+-------------+------+----
| ETH | VLAN | ETH |
| ADDRS | TPID | TCI | TYPE |
+-------------------+-------------+------+----
<-------- mac_len --------->
<------------->
to be removed
- After skb_reorder_vlan_header()
mac_header data
v v
+-------------------+------+----
| ETH | ETH |
| ADDRS | TYPE |
+-------------------+------+----
<-------- mac_len --------->
This is ok, but in rx double tag case, it corrupts packets:
- Before skb_reorder_vlan_header()
mac_header data
v v
+-------------------+-------------+-------------+------+----
| ETH | VLAN | VLAN | ETH |
| ADDRS | TPID | TCI | TPID | TCI | TYPE |
+-------------------+-------------+-------------+------+----
<--------------- mac_len ---------------->
<------------->
should be removed
<--------------------------->
actually will be removed
- After skb_reorder_vlan_header()
mac_header data
v v
+-------------------+------+----
| ETH | ETH |
| ADDRS | TYPE |
+-------------------+------+----
<--------------- mac_len ---------------->
So, two of vlan tags are both removed while only inner one should be
removed and mac_header (and mac_len) is broken.
skb_vlan_untag() is meant for removing the vlan header at (skb->data - 2),
so use skb->data and skb->mac_header to calculate the right offset.
Reported-by: Brandon Carpenter <brandon.carpenter@cypherpath.com>
Fixes: a6e18ff11170 ("vlan: Fix untag operations of stacked vlans with REORDER_HEADER off")
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
If set/unset mode of the tunnel_key action is not provided, ->init() still
returns 0, and the caller proceeds with bogus 'struct tc_action *' object,
this results in crash:
% tc actions add action tunnel_key src_ip 1.1.1.1 dst_ip 2.2.2.1 id 7 index 1
[ 35.805515] general protection fault: 0000 [#1] SMP PTI
[ 35.806161] Modules linked in: act_tunnel_key kvm_intel kvm irqbypass
crct10dif_pclmul crc32_pclmul ghash_clmulni_intel pcbc aesni_intel aes_x86_64
crypto_simd glue_helper cryptd serio_raw
[ 35.808233] CPU: 1 PID: 428 Comm: tc Not tainted 4.16.0-rc4+ #286
[ 35.808929] RIP: 0010:tcf_action_init+0x90/0x190
[ 35.809457] RSP: 0018:ffffb8edc068b9a0 EFLAGS: 00010206
[ 35.810053] RAX: 1320c000000a0003 RBX: 0000000000000001 RCX: 0000000000000000
[ 35.810866] RDX: 0000000000000070 RSI: 0000000000007965 RDI: ffffb8edc068b910
[ 35.811660] RBP: ffffb8edc068b9d0 R08: 0000000000000000 R09: ffffb8edc068b808
[ 35.812463] R10: ffffffffc02bf040 R11: 0000000000000040 R12: ffffb8edc068bb38
[ 35.813235] R13: 0000000000000000 R14: 0000000000000000 R15: ffffb8edc068b910
[ 35.814006] FS: 00007f3d0d8556c0(0000) GS:ffff91d1dbc40000(0000)
knlGS:0000000000000000
[ 35.814881] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 35.815540] CR2: 000000000043f720 CR3: 0000000019248001 CR4: 00000000001606a0
[ 35.816457] Call Trace:
[ 35.817158] tc_ctl_action+0x11a/0x220
[ 35.817795] rtnetlink_rcv_msg+0x23d/0x2e0
[ 35.818457] ? __slab_alloc+0x1c/0x30
[ 35.819079] ? __kmalloc_node_track_caller+0xb1/0x2b0
[ 35.819544] ? rtnl_calcit.isra.30+0xe0/0xe0
[ 35.820231] netlink_rcv_skb+0xce/0x100
[ 35.820744] netlink_unicast+0x164/0x220
[ 35.821500] netlink_sendmsg+0x293/0x370
[ 35.822040] sock_sendmsg+0x30/0x40
[ 35.822508] ___sys_sendmsg+0x2c5/0x2e0
[ 35.823149] ? pagecache_get_page+0x27/0x220
[ 35.823714] ? filemap_fault+0xa2/0x640
[ 35.824423] ? page_add_file_rmap+0x108/0x200
[ 35.825065] ? alloc_set_pte+0x2aa/0x530
[ 35.825585] ? finish_fault+0x4e/0x70
[ 35.826140] ? __handle_mm_fault+0xbc1/0x10d0
[ 35.826723] ? __sys_sendmsg+0x41/0x70
[ 35.827230] __sys_sendmsg+0x41/0x70
[ 35.827710] do_syscall_64+0x68/0x120
[ 35.828195] entry_SYSCALL_64_after_hwframe+0x3d/0xa2
[ 35.828859] RIP: 0033:0x7f3d0ca4da67
[ 35.829331] RSP: 002b:00007ffc9f284338 EFLAGS: 00000246 ORIG_RAX:
000000000000002e
[ 35.830304] RAX: ffffffffffffffda RBX: 00007ffc9f284460 RCX: 00007f3d0ca4da67
[ 35.831247] RDX: 0000000000000000 RSI: 00007ffc9f2843b0 RDI: 0000000000000003
[ 35.832167] RBP: 000000005aa6a7a9 R08: 0000000000000001 R09: 0000000000000000
[ 35.833075] R10: 00000000000005f1 R11: 0000000000000246 R12: 0000000000000000
[ 35.833997] R13: 00007ffc9f2884c0 R14: 0000000000000001 R15: 0000000000674640
[ 35.834923] Code: 24 30 bb 01 00 00 00 45 31 f6 eb 5e 8b 50 08 83 c2 07 83 e2
fc 83 c2 70 49 8b 07 48 8b 40 70 48 85 c0 74 10 48 89 14 24 4c 89 ff <ff> d0 48
8b 14 24 48 01 c2 49 01 d6 45 85 ed 74 05 41 83 47 2c
[ 35.837442] RIP: tcf_action_init+0x90/0x190 RSP: ffffb8edc068b9a0
[ 35.838291] ---[ end trace a095c06ee4b97a26 ]---
Fixes: d0f6dd8a914f ("net/sched: Introduce act_tunnel_key")
Signed-off-by: Roman Mashak <mrv@mojatatu.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Closing of a listen socket wakes up kernel_accept() of
smc_tcp_listen_worker(), and then has to wait till smc_tcp_listen_worker()
gives up the internal clcsock. The wait logic introduced with
commit 127f49705823 ("net/smc: release clcsock from tcp_listen_worker")
might wait longer than necessary. This patch implements the idea to
implement the wait just with flush_work(), and gets rid of the extra
smc_close_wait_listen_clcsock() function.
Fixes: 127f49705823 ("net/smc: release clcsock from tcp_listen_worker")
Reported-by: Hans Wippel <hwippel@linux.vnet.ibm.com>
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Prior to the rework of PMTU information storage in commit
2c8cec5c10bc ("ipv4: Cache learned PMTU information in inetpeer."),
when a PMTU event advertising a PMTU smaller than
net.ipv4.route.min_pmtu was received, we would disable setting the DF
flag on packets by locking the MTU metric, and set the PMTU to
net.ipv4.route.min_pmtu.
Since then, we don't disable DF, and set PMTU to
net.ipv4.route.min_pmtu, so the intermediate router that has this link
with a small MTU will have to drop the packets.
This patch reestablishes pre-2.6.39 behavior by splitting
rtable->rt_pmtu into a bitfield with rt_mtu_locked and rt_pmtu.
rt_mtu_locked indicates that we shouldn't set the DF bit on that path,
and is checked in ip_dont_fragment().
One possible workaround is to set net.ipv4.route.min_pmtu to a value low
enough to accommodate the lowest MTU encountered.
Fixes: 2c8cec5c10bc ("ipv4: Cache learned PMTU information in inetpeer.")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Andrei Vagin reported a KASAN: slab-out-of-bounds error in
skb_update_prio()
Since SYNACK might be attached to a request socket, we need to
get back to the listener socket.
Since this listener is manipulated without locks, add const
qualifiers to sock_cgroup_prioidx() so that the const can also
be used in skb_update_prio()
Also add the const qualifier to sock_cgroup_classid() for consistency.
Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andrei Vagin <avagin@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2018-03-13
1) Refuse to insert 32 bit userspace socket policies on 64
bit systems like we do it for standard policies. We don't
have a compat layer, so inserting socket policies from
32 bit userspace will lead to a broken configuration.
2) Make the policy hold queue work without the flowcache.
Dummy bundles are not chached anymore, so we need to
generate a new one on each lookup as long as the SAs
are not yet in place.
3) Fix the validation of the esn replay attribute. The
The sanity check in verify_replay() is bypassed if
the XFRM_STATE_ESN flag is not set. Fix this by doing
the sanity check uncoditionally.
From Florian Westphal.
4) After most of the dst_entry garbage collection code
is removed, we may leak xfrm_dst entries as they are
neither cached nor tracked somewhere. Fix this by
reusing the 'uncached_list' to track xfrm_dst entries
too. From Xin Long.
5) Fix a rcu_read_lock/rcu_read_unlock imbalance in
xfrm_get_tos() From Xin Long.
6) Fix an infinite loop in xfrm_get_dst_nexthop. On
transport mode we fetch the child dst_entry after
we continue, so this pointer is never updated.
Fix this by fetching it before we continue.
7) Fix ESN sequence number gap after IPsec GSO packets.
We accidentally increment the sequence number counter
on the xfrm_state by one packet too much in the ESN
case. Fix this by setting the sequence number to the
correct value.
8) Reset the ethernet protocol after decapsulation only if a
mac header was set. Otherwise it breaks configurations
with TUN devices. From Yossi Kuperman.
9) Fix __this_cpu_read() usage in preemptible code. Use
this_cpu_read() instead in ipcomp_alloc_tfms().
From Greg Hackmann.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
f7c83bcbfaf5 ("net: xfrm: use __this_cpu_read per-cpu helper") added a
__this_cpu_read() call inside ipcomp_alloc_tfms().
At the time, __this_cpu_read() required the caller to either not care
about races or to handle preemption/interrupt issues. 3.15 tightened
the rules around some per-cpu operations, and now __this_cpu_read()
should never be used in a preemptible context. On 3.15 and later, we
need to use this_cpu_read() instead.
syzkaller reported this leading to the following kernel BUG while
fuzzing sendmsg:
BUG: using __this_cpu_read() in preemptible [00000000] code: repro/3101
caller is ipcomp_init_state+0x185/0x990
CPU: 3 PID: 3101 Comm: repro Not tainted 4.16.0-rc4-00123-g86f84779d8e9 #154
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014
Call Trace:
dump_stack+0xb9/0x115
check_preemption_disabled+0x1cb/0x1f0
ipcomp_init_state+0x185/0x990
? __xfrm_init_state+0x876/0xc20
? lock_downgrade+0x5e0/0x5e0
ipcomp4_init_state+0xaa/0x7c0
__xfrm_init_state+0x3eb/0xc20
xfrm_init_state+0x19/0x60
pfkey_add+0x20df/0x36f0
? pfkey_broadcast+0x3dd/0x600
? pfkey_sock_destruct+0x340/0x340
? pfkey_seq_stop+0x80/0x80
? __skb_clone+0x236/0x750
? kmem_cache_alloc+0x1f6/0x260
? pfkey_sock_destruct+0x340/0x340
? pfkey_process+0x62a/0x6f0
pfkey_process+0x62a/0x6f0
? pfkey_send_new_mapping+0x11c0/0x11c0
? mutex_lock_io_nested+0x1390/0x1390
pfkey_sendmsg+0x383/0x750
? dump_sp+0x430/0x430
sock_sendmsg+0xc0/0x100
___sys_sendmsg+0x6c8/0x8b0
? copy_msghdr_from_user+0x3b0/0x3b0
? pagevec_lru_move_fn+0x144/0x1f0
? find_held_lock+0x32/0x1c0
? do_huge_pmd_anonymous_page+0xc43/0x11e0
? lock_downgrade+0x5e0/0x5e0
? get_kernel_page+0xb0/0xb0
? _raw_spin_unlock+0x29/0x40
? do_huge_pmd_anonymous_page+0x400/0x11e0
? __handle_mm_fault+0x553/0x2460
? __fget_light+0x163/0x1f0
? __sys_sendmsg+0xc7/0x170
__sys_sendmsg+0xc7/0x170
? SyS_shutdown+0x1a0/0x1a0
? __do_page_fault+0x5a0/0xca0
? lock_downgrade+0x5e0/0x5e0
SyS_sendmsg+0x27/0x40
? __sys_sendmsg+0x170/0x170
do_syscall_64+0x19f/0x640
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x7f0ee73dfb79
RSP: 002b:00007ffe14fc15a8 EFLAGS: 00000207 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f0ee73dfb79
RDX: 0000000000000000 RSI: 00000000208befc8 RDI: 0000000000000004
RBP: 00007ffe14fc15b0 R08: 00007ffe14fc15c0 R09: 00007ffe14fc15c0
R10: 0000000000000000 R11: 0000000000000207 R12: 0000000000400440
R13: 00007ffe14fc16b0 R14: 0000000000000000 R15: 0000000000000000
Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
|
|
During the conversion to dsa_is_user_port(), a condition ended up being
reversed, which would prevent the creation of any user port when using
the legacy binding and/or platform data, fix that.
Fixes: 4a5b85ffe2a0 ("net: dsa: use dsa_is_user_port everywhere")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The l2tp_tunnel_create() function checks for v4mapped ipv6
sockets and cache that flag, so that l2tp core code can
reusing it at xmit time.
If the socket is provided by the userspace, the connection
status of the tunnel sockets can change between the tunnel
creation and the xmit call, so that syzbot is able to
trigger the following splat:
BUG: KASAN: use-after-free in ip6_dst_idev include/net/ip6_fib.h:192
[inline]
BUG: KASAN: use-after-free in ip6_xmit+0x1f76/0x2260
net/ipv6/ip6_output.c:264
Read of size 8 at addr ffff8801bd949318 by task syz-executor4/23448
CPU: 0 PID: 23448 Comm: syz-executor4 Not tainted 4.16.0-rc4+ #65
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x194/0x24d lib/dump_stack.c:53
print_address_description+0x73/0x250 mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report+0x23c/0x360 mm/kasan/report.c:412
__asan_report_load8_noabort+0x14/0x20 mm/kasan/report.c:433
ip6_dst_idev include/net/ip6_fib.h:192 [inline]
ip6_xmit+0x1f76/0x2260 net/ipv6/ip6_output.c:264
inet6_csk_xmit+0x2fc/0x580 net/ipv6/inet6_connection_sock.c:139
l2tp_xmit_core net/l2tp/l2tp_core.c:1053 [inline]
l2tp_xmit_skb+0x105f/0x1410 net/l2tp/l2tp_core.c:1148
pppol2tp_sendmsg+0x470/0x670 net/l2tp/l2tp_ppp.c:341
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg+0xca/0x110 net/socket.c:640
___sys_sendmsg+0x767/0x8b0 net/socket.c:2046
__sys_sendmsg+0xe5/0x210 net/socket.c:2080
SYSC_sendmsg net/socket.c:2091 [inline]
SyS_sendmsg+0x2d/0x50 net/socket.c:2087
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x453e69
RSP: 002b:00007f819593cc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f819593d6d4 RCX: 0000000000453e69
RDX: 0000000000000081 RSI: 000000002037ffc8 RDI: 0000000000000004
RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000004c3 R14: 00000000006f72e8 R15: 0000000000000000
This change addresses the issues:
* explicitly checking for TCP_ESTABLISHED for user space provided sockets
* dropping the v4mapped flag usage - it can become outdated - and
explicitly invoking ipv6_addr_v4mapped() instead
The issue is apparently there since ancient times.
v1 -> v2: (many thanks to Guillaume)
- with csum issue introduced in v1
- replace pr_err with pr_debug
- fix build issue with IPV6 disabled
- move l2tp_sk_is_v4mapped in l2tp_core.c
v2 -> v3:
- don't update inet_daddr for v4mapped address, unneeded
- drop rendundant check at creation time
Reported-and-tested-by: syzbot+92fa328176eb07e4ac1a@syzkaller.appspotmail.com
Fixes: 3557baabf280 ("[L2TP]: PPP over L2TP driver core")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
On unsuccesful ip6_datagram_connect(), if the failure is caused by
ip6_datagram_dst_update(), the sk peer information are cleared, but
the sk->sk_state is preserved.
If the socket was already in an established status, the overall sk
status is inconsistent and fouls later checks in datagram code.
Fix this saving the old peer information and restoring them in
case of failure. This also aligns ipv6 datagram connect() behavior
with ipv4.
v1 -> v2:
- added missing Fixes tag
Fixes: 85cb73ff9b74 ("net: ipv6: reset daddr and dport in sk if connect() fails")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for your net tree, they are:
1) Fixed hashtable representation doesn't support timeout flag, skip it
otherwise rules to add elements from the packet fail bogusly fail with
EOPNOTSUPP.
2) Fix bogus error with 32-bits ebtables userspace and 64-bits kernel,
patch from Florian Westphal.
3) Sanitize proc names in several x_tables extensions, also from Florian.
4) Add sanitization to ebt_among wormhash logic, from Florian.
5) Missing release of hook array in flowtable.
====================
|
|
registered
Now when using 'ss' in iproute, kernel would try to load all _diag
modules, which also causes corresponding family and proto modules
to be loaded as well due to module dependencies.
Like after running 'ss', sctp, dccp, af_packet (if it works as a module)
would be loaded.
For example:
$ lsmod|grep sctp
$ ss
$ lsmod|grep sctp
sctp_diag 16384 0
sctp 323584 5 sctp_diag
inet_diag 24576 4 raw_diag,tcp_diag,sctp_diag,udp_diag
libcrc32c 16384 3 nf_conntrack,nf_nat,sctp
As these family and proto modules are loaded unintentionally, it
could cause some problems, like:
- Some debug tools use 'ss' to collect the socket info, which loads all
those diag and family and protocol modules. It's noisy for identifying
issues.
- Users usually expect to drop sctp init packet silently when they
have no sense of sctp protocol instead of sending abort back.
- It wastes resources (especially with multiple netns), and SCTP module
can't be unloaded once it's loaded.
...
In short, it's really inappropriate to have these family and proto
modules loaded unexpectedly when just doing debugging with inet_diag.
This patch is to introduce sock_load_diag_module() where it loads
the _diag module only when it's corresponding family or proto has
been already registered.
Note that we can't just load _diag module without the family or
proto loaded, as some symbols used in _diag module are from the
family or proto module.
v1->v2:
- move inet proto check to inet_diag to avoid a compiling err.
v2->v3:
- define sock_load_diag_module in sock.c and export one symbol
only.
- improve the changelog.
Reported-by: Sabrina Dubroca <sd@queasysnail.net>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Acked-by: Phil Sutter <phil@nwl.cc>
Acked-by: Sabrina Dubroca <sd@queasysnail.net>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Max delat_t should be the full_bucket/rate instead of the full_bucket.
Also report EINVAL if the rate is zero.
Fixes: 96fbc13d7e77 ("openvswitch: Add meter infrastructure")
Cc: Andy Zhou <azhou@ovn.org>
Signed-off-by: zhangliping <zhangliping02@baidu.com>
Acked-by: Pravin B Shelar <pshelar@ovn.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Otherwise we leak this array.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
ebt_among is special, it has a dynamic match size and is exempt
from the central size checks.
commit c4585a2823edf ("bridge: ebt_among: add missing match size checks")
added validation for pool size, but missed fact that the macros
ebt_among_wh_src/dst can already return out-of-bound result because
they do not check value of wh_src/dst_ofs (an offset) vs. the size
of the match that userspace gave to us.
v2:
check that offset has correct alignment.
Paolo Abeni points out that we should also check that src/dst
wormhash arrays do not overlap, and src + length lines up with
start of dst (or vice versa).
v3: compact wormhash_sizes_valid() part
NB: Fixes tag is intentionally wrong, this bug exists from day
one when match was added for 2.6 kernel. Tag is there so stable
maintainers will notice this one too.
Tested with same rules from the earlier patch.
Fixes: c4585a2823edf ("bridge: ebt_among: add missing match size checks")
Reported-by: <syzbot+bdabab6f1983a03fc009@syzkaller.appspotmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
recent and hashlimit both create /proc files, but only check that
name is 0 terminated.
This can trigger WARN() from procfs when name is "" or "/".
Add helper for this and then use it for both.
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: Eric Dumazet <eric.dumazet@gmail.com>
Reported-by: <syzbot+0502b00edac2a0680b61@syzkaller.appspotmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The last rule in the blob has next_entry offset that is same as total size.
This made "ebtables32 -A OUTPUT -d de:ad:be:ef:01:02" fail on 64 bit kernel.
Fixes: b71812168571fa ("netfilter: ebtables: CONFIG_COMPAT: don't trust userland offsets")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
|
|
The patch adds skb_cow_header() to ensure enough headroom
at ip6erspan_tunnel_xmit before pushing the erspan header
to the skb.
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
When users fill in incorrect erspan version number through
the struct erspan_metadata uapi, current code skips pushing
the erspan header but continue pushing the gre header, which
is incorrect. The patch fixes it by returning error.
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The patch adds the erspan v2 proto in ip6gre_tunnel_lookup
so the erspan v2 tunnel can be found correctly.
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
