summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2019-05-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: "Several bug fixes, many are quick merge-window regression cures: - When NLM_F_EXCL is not set, allow same fib rule insertion. From Hangbin Liu. - Several cures in sja1105 DSA driver (while loop exit condition fix, return of negative u8, etc.) from Vladimir Oltean. - Handle tx/rx delays in realtek PHY driver properly, from Serge Semin. - Double free in cls_matchall, from Pieter Jansen van Vuuren. - Disable SIOCSHWTSTAMP in macvlan/vlan containers, from Hangbin Liu. - Endainness fixes in aqc111, from Oliver Neukum. - Handle errors in packet_init properly, from Haibing Yue. - Various W=1 warning fixes in kTLS, from Jakub Kicinski" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (34 commits) nfp: add missing kdoc net/tls: handle errors from padding_length() net/tls: remove set but not used variables docs/btf: fix the missing section marks nfp: bpf: fix static check error through tightening shift amount adjustment selftests: bpf: initialize bpf_object pointers where needed packet: Fix error path in packet_init net/tcp: use deferred jump label for TCP acked data hook net: aquantia: fix undefined devm_hwmon_device_register_with_info reference aqc111: fix double endianness swap on BE aqc111: fix writing to the phy on BE aqc111: fix endianness issue in aqc111_change_mtu vlan: disable SIOCSHWTSTAMP in container macvlan: disable SIOCSHWTSTAMP in container tipc: fix hanging clients using poll with EPOLLOUT flag tuntap: synchronize through tfiles array instead of tun->numqueues tuntap: fix dividing by zero in ebpf queue selection dwmac4_prog_mtl_tx_algorithms() missing write operation ptp_qoriq: fix NULL access if ptp dt node missing net/sched: avoid double free on matchall reoffload ...
2019-05-09net/tls: handle errors from padding_length()Jakub Kicinski
At the time padding_length() is called the record header is still part of the message. If malicious TLS 1.3 peer sends an all-zero record padding_length() will stop at the record header, and return full length of the data including the tail_size. Subsequent subtraction of prot->overhead_size from rxm->full_len will cause rxm->full_len to turn negative. skb accessors, however, will always catch resulting out-of-bounds operation, so in practice this fix comes down to returning the correct error code. It also fixes a set but not used warning. This code was added by commit 130b392c6cd6 ("net: tls: Add tls 1.3 support"). CC: Dave Watson <davejwatson@fb.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09net/tls: remove set but not used variablesJakub Kicinski
Commit 4504ab0e6eb8 ("net/tls: Inform user space about send buffer availability") made us report write_space regardless whether partial record push was successful or not. Remove the now unused return value to clean up the following W=1 warning: net/tls/tls_device.c: In function ‘tls_device_write_space’: net/tls/tls_device.c:546:6: warning: variable ‘rc’ set but not used [-Wunused-but-set-variable] int rc = 0; ^~ CC: Vakul Garg <vakul.garg@nxp.com> CC: Boris Pismenny <borisp@mellanox.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09Merge tag 'nfs-for-5.2-1' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds
Pull NFS client updates from Anna Schumaker: "Highlights include: Stable bugfixes: - Fall back to MDS if no deviceid is found rather than aborting # v4.11+ - NFS4: Fix v4.0 client state corruption when mount Features: - Much improved handling of soft mounts with NFS v4.0: - Reduce risk of false positive timeouts - Faster failover of reads and writes after a timeout - Added a "softerr" mount option to return ETIMEDOUT instead of EIO to the application after a timeout - Increase number of xprtrdma backchannel requests - Add additional xprtrdma tracepoints - Improved send completion batching for xprtrdma Other bugfixes and cleanups: - Return -EINVAL when NFS v4.2 is passed an invalid dedup mode - Reduce usage of GFP_ATOMIC pages in SUNRPC - Various minor NFS over RDMA cleanups and bugfixes - Use the correct container namespace for upcalls - Don't share superblocks between user namespaces - Various other container fixes - Make nfs_match_client() killable to prevent soft lockups - Don't mark all open state for recovery when handling recallable state revoked flag" * tag 'nfs-for-5.2-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (69 commits) SUNRPC: Rebalance a kref in auth_gss.c NFS: Fix a double unlock from nfs_match,get_client nfs: pass the correct prototype to read_cache_page NFSv4: don't mark all open state for recovery when handling recallable state revoked flag SUNRPC: Fix an error code in gss_alloc_msg() SUNRPC: task should be exit if encode return EKEYEXPIRED more times NFS4: Fix v4.0 client state corruption when mount PNFS fallback to MDS if no deviceid found NFS: make nfs_match_client killable lockd: Store the lockd client credential in struct nlm_host NFS: When mounting, don't share filesystems between different user namespaces NFS: Convert NFSv2 to use the container user namespace NFSv4: Convert the NFS client idmapper to use the container user namespace NFS: Convert NFSv3 to use the container user namespace SUNRPC: Use namespace of listening daemon in the client AUTH_GSS upcall SUNRPC: Use the client user namespace when encoding creds NFS: Store the credential of the mount process in the nfs_server SUNRPC: Cache cred of process creating the rpc_client xprtrdma: Remove stale comment xprtrdma: Update comments that reference ib_drain_qp ...
2019-05-09packet: Fix error path in packet_initYueHaibing
kernel BUG at lib/list_debug.c:47! invalid opcode: 0000 [#1 CPU: 0 PID: 12914 Comm: rmmod Tainted: G W 5.1.0+ #47 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:__list_del_entry_valid+0x53/0x90 Code: 48 8b 32 48 39 fe 75 35 48 8b 50 08 48 39 f2 75 40 b8 01 00 00 00 5d c3 48 89 fe 48 89 c2 48 c7 c7 18 75 fe 82 e8 cb 34 78 ff <0f> 0b 48 89 fe 48 c7 c7 50 75 fe 82 e8 ba 34 78 ff 0f 0b 48 89 f2 RSP: 0018:ffffc90001c2fe40 EFLAGS: 00010286 RAX: 000000000000004e RBX: ffffffffa0184000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffff888237a17788 RDI: 00000000ffffffff RBP: ffffc90001c2fe40 R08: 0000000000000000 R09: 0000000000000000 R10: ffffc90001c2fe10 R11: 0000000000000000 R12: 0000000000000000 R13: ffffc90001c2fe50 R14: ffffffffa0184000 R15: 0000000000000000 FS: 00007f3d83634540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000555c350ea818 CR3: 0000000231677000 CR4: 00000000000006f0 Call Trace: unregister_pernet_operations+0x34/0x120 unregister_pernet_subsys+0x1c/0x30 packet_exit+0x1c/0x369 [af_packet __x64_sys_delete_module+0x156/0x260 ? lockdep_hardirqs_on+0x133/0x1b0 ? do_syscall_64+0x12/0x1f0 do_syscall_64+0x6e/0x1f0 entry_SYSCALL_64_after_hwframe+0x49/0xbe When modprobe af_packet, register_pernet_subsys fails and does a cleanup, ops->list is set to LIST_POISON1, but the module init is considered to success, then while rmmod it, BUG() is triggered in __list_del_entry_valid which is called from unregister_pernet_subsys. This patch fix error handing path in packet_init to avoid possilbe issue if some error occur. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09SUNRPC: Rebalance a kref in auth_gss.cChuck Lever
Restore the kref_get that matches the gss_put_auth(gss_msg->auth) done by gss_release_msg(). Fixes: ac83228a7101 ("SUNRPC: Use namespace of listening daemon ...") Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-05-09SUNRPC: Fix an error code in gss_alloc_msg()Dan Carpenter
If kstrdup_const() then this function returns zero (success) but it should return -ENOMEM. Fixes: ac83228a7101 ("SUNRPC: Use namespace of listening daemon in the client AUTH_GSS upcall") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-05-09SUNRPC: task should be exit if encode return EKEYEXPIRED more timesZhangXiaoxu
If the rpc.gssd always return cred success, but now the cred is expired, then the task will loop in call_refresh and call_transmit. Exit the rpc task after retry. Signed-off-by: ZhangXiaoxu <zhangxiaoxu5@huawei.com> Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
2019-05-09net/tcp: use deferred jump label for TCP acked data hookJakub Kicinski
User space can flip the clean_acked_data_enabled static branch on and off with TLS offload when CONFIG_TLS_DEVICE is enabled. jump_label.h suggests we use the delayed version in this case. Deferred branches now also don't take the branch mutex on decrement, so we avoid potential locking issues. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09Merge tag 'batadv-net-for-davem-20190509' of git://git.open-mesh.org/linux-mergeDavid S. Miller
Simon Wunderlich says: ==================== This feature/cleanup patchset includes the following patches: - bump version strings, by Simon Wunderlich (we forgot to include this patch previously ...) - fix multicast tt/tvlv worker locking, by Linus Lüssing ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09vlan: disable SIOCSHWTSTAMP in containerHangbin Liu
With NET_ADMIN enabled in container, a normal user could be mapped to root and is able to change the real device's rx filter via ioctl on vlan, which would affect the other ptp process on host. Fix it by disabling SIOCSHWTSTAMP in container. Fixes: a6111d3c93d0 ("vlan: Pass SIOC[SG]HWTSTAMP ioctls to real device") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09tipc: fix hanging clients using poll with EPOLLOUT flagParthasarathy Bhuvaragan
commit 517d7c79bdb398 ("tipc: fix hanging poll() for stream sockets") introduced a regression for clients using non-blocking sockets. After the commit, we send EPOLLOUT event to the client even in TIPC_CONNECTING state. This causes the subsequent send() to fail with ENOTCONN, as the socket is still not in TIPC_ESTABLISHED state. In this commit, we: - improve the fix for hanging poll() by replacing sk_data_ready() with sk_state_change() to wake up all clients. - revert the faulty updates introduced by commit 517d7c79bdb398 ("tipc: fix hanging poll() for stream sockets"). Fixes: 517d7c79bdb398 ("tipc: fix hanging poll() for stream sockets") Signed-off-by: Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@gmail.com> Acked-by: Jon Maloy <jon.maloy@ericsson.se> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-09Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds
Pull rdma updates from Jason Gunthorpe: "This has been a smaller cycle than normal. One new driver was accepted, which is unusual, and at least one more driver remains in review on the list. Summary: - Driver fixes for hns, hfi1, nes, rxe, i40iw, mlx5, cxgb4, vmw_pvrdma - Many patches from MatthewW converting radix tree and IDR users to use xarray - Introduction of tracepoints to the MAD layer - Build large SGLs at the start for DMA mapping and get the driver to split them - Generally clean SGL handling code throughout the subsystem - Support for restricting RDMA devices to net namespaces for containers - Progress to remove object allocation boilerplate code from drivers - Change in how the mlx5 driver shows representor ports linked to VFs - mlx5 uapi feature to access the on chip SW ICM memory - Add a new driver for 'EFA'. This is HW that supports user space packet processing through QPs in Amazon's cloud" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (186 commits) RDMA/ipoib: Allow user space differentiate between valid dev_port IB/core, ipoib: Do not overreact to SM LID change event RDMA/device: Don't fire uevent before device is fully initialized lib/scatterlist: Remove leftover from sg_page_iter comment RDMA/efa: Add driver to Kconfig/Makefile RDMA/efa: Add the efa module RDMA/efa: Add EFA verbs implementation RDMA/efa: Add common command handlers RDMA/efa: Implement functions that submit and complete admin commands RDMA/efa: Add the ABI definitions RDMA/efa: Add the com service API definitions RDMA/efa: Add the efa_com.h file RDMA/efa: Add the efa.h header file RDMA/efa: Add EFA device definitions RDMA: Add EFA related definitions RDMA/umem: Remove hugetlb flag RDMA/bnxt_re: Use core helpers to get aligned DMA address RDMA/i40iw: Use core helpers to get aligned DMA address within a supported page size RDMA/verbs: Add a DMA iterator to return aligned contiguous memory blocks RDMA/umem: Add API to find best driver supported page size in an MR ...
2019-05-08net/sched: avoid double free on matchall reoffloadPieter Jansen van Vuuren
Avoid freeing cls_mall.rule twice when failing to setup flow_action offload used in the hardware intermediate representation. This is achieved by returning 0 when the setup fails but the skip software flag has not been set. Fixes: f00cbf196814 ("net/sched: use the hardware intermediate representation for matchall") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-08openvswitch: Replace removed NF_NAT_NEEDED with IS_ENABLED(CONFIG_NF_NAT)Geert Uytterhoeven
Commit 4806e975729f99c7 ("netfilter: replace NF_NAT_NEEDED with IS_ENABLED(CONFIG_NF_NAT)") removed CONFIG_NF_NAT_NEEDED, but a new user popped up afterwards. Fixes: fec9c271b8f1bde1 ("openvswitch: load and reference the NAT helper.") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Florian Westphal <fw@strlen.de> Acked-by: Flavio Leitner <fbl@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-08ipv4: Fix raw socket lookup for local trafficDavid Ahern
inet_iif should be used for the raw socket lookup. inet_iif considers rt_iif which handles the case of local traffic. As it stands, ping to a local address with the '-I <dev>' option fails ever since ping was changed to use SO_BINDTODEVICE instead of cmsg + IP_PKTINFO. IPv6 works fine. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-08fib_rules: return 0 directly if an exactly same rule exists when NLM_F_EXCL ↵Hangbin Liu
not supplied With commit 153380ec4b9 ("fib_rules: Added NLM_F_EXCL support to fib_nl_newrule") we now able to check if a rule already exists. But this only works with iproute2. For other tools like libnl, NetworkManager, it still could add duplicate rules with only NLM_F_CREATE flag, like [localhost ~ ]# ip rule 0: from all lookup local 32766: from all lookup main 32767: from all lookup default 100000: from 192.168.7.5 lookup 5 100000: from 192.168.7.5 lookup 5 As it doesn't make sense to create two duplicate rules, let's just return 0 if the rule exists. Fixes: 153380ec4b9 ("fib_rules: Added NLM_F_EXCL support to fib_nl_newrule") Reported-by: Thomas Haller <thaller@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: "Highlights: 1) Support AES128-CCM ciphers in kTLS, from Vakul Garg. 2) Add fib_sync_mem to control the amount of dirty memory we allow to queue up between synchronize RCU calls, from David Ahern. 3) Make flow classifier more lockless, from Vlad Buslov. 4) Add PHY downshift support to aquantia driver, from Heiner Kallweit. 5) Add SKB cache for TCP rx and tx, from Eric Dumazet. This reduces contention on SLAB spinlocks in heavy RPC workloads. 6) Partial GSO offload support in XFRM, from Boris Pismenny. 7) Add fast link down support to ethtool, from Heiner Kallweit. 8) Use siphash for IP ID generator, from Eric Dumazet. 9) Pull nexthops even further out from ipv4/ipv6 routes and FIB entries, from David Ahern. 10) Move skb->xmit_more into a per-cpu variable, from Florian Westphal. 11) Improve eBPF verifier speed and increase maximum program size, from Alexei Starovoitov. 12) Eliminate per-bucket spinlocks in rhashtable, and instead use bit spinlocks. From Neil Brown. 13) Allow tunneling with GUE encap in ipvs, from Jacky Hu. 14) Improve link partner cap detection in generic PHY code, from Heiner Kallweit. 15) Add layer 2 encap support to bpf_skb_adjust_room(), from Alan Maguire. 16) Remove SKB list implementation assumptions in SCTP, your's truly. 17) Various cleanups, optimizations, and simplifications in r8169 driver. From Heiner Kallweit. 18) Add memory accounting on TX and RX path of SCTP, from Xin Long. 19) Switch PHY drivers over to use dynamic featue detection, from Heiner Kallweit. 20) Support flow steering without masking in dpaa2-eth, from Ioana Ciocoi. 21) Implement ndo_get_devlink_port in netdevsim driver, from Jiri Pirko. 22) Increase the strict parsing of current and future netlink attributes, also export such policies to userspace. From Johannes Berg. 23) Allow DSA tag drivers to be modular, from Andrew Lunn. 24) Remove legacy DSA probing support, also from Andrew Lunn. 25) Allow ll_temac driver to be used on non-x86 platforms, from Esben Haabendal. 26) Add a generic tracepoint for TX queue timeouts to ease debugging, from Cong Wang. 27) More indirect call optimizations, from Paolo Abeni" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1763 commits) cxgb4: Fix error path in cxgb4_init_module net: phy: improve pause mode reporting in phy_print_status dt-bindings: net: Fix a typo in the phy-mode list for ethernet bindings net: macb: Change interrupt and napi enable order in open net: ll_temac: Improve error message on error IRQ net/sched: remove block pointer from common offload structure net: ethernet: support of_get_mac_address new ERR_PTR error net: usb: smsc: fix warning reported by kbuild test robot staging: octeon-ethernet: Fix of_get_mac_address ERR_PTR check net: dsa: support of_get_mac_address new ERR_PTR error net: dsa: sja1105: Fix status initialization in sja1105_get_ethtool_stats vrf: sit mtu should not be updated when vrf netdev is the link net: dsa: Fix error cleanup path in dsa_init_module l2tp: Fix possible NULL pointer dereference taprio: add null check on sched_nest to avoid potential null pointer dereference net: mvpp2: cls: fix less than zero check on a u32 variable net_sched: sch_fq: handle non connected flows net_sched: sch_fq: do not assume EDT packets are ordered net: hns3: use devm_kcalloc when allocating desc_cb net: hns3: some cleanup for struct hns3_enet_ring ...
2019-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Minor conflict with the DSA legacy code removal. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07Merge tag 'driver-core-5.2-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core/kobject updates from Greg KH: "Here is the "big" set of driver core patches for 5.2-rc1 There are a number of ACPI patches in here as well, as Rafael said they should go through this tree due to the driver core changes they required. They have all been acked by the ACPI developers. There are also a number of small subsystem-specific changes in here, due to some changes to the kobject core code. Those too have all been acked by the various subsystem maintainers. As for content, it's pretty boring outside of the ACPI changes: - spdx cleanups - kobject documentation updates - default attribute groups for kobjects - other minor kobject/driver core fixes All have been in linux-next for a while with no reported issues" * tag 'driver-core-5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (47 commits) kobject: clean up the kobject add documentation a bit more kobject: Fix kernel-doc comment first line kobject: Remove docstring reference to kset firmware_loader: Fix a typo ("syfs" -> "sysfs") kobject: fix dereference before null check on kobj Revert "driver core: platform: Fix the usage of platform device name(pdev->name)" init/config: Do not select BUILD_BIN2C for IKCONFIG Provide in-kernel headers to make extending kernel easier kobject: Improve doc clarity kobject_init_and_add() kobject: Improve docs for kobject_add/del driver core: platform: Fix the usage of platform device name(pdev->name) livepatch: Replace klp_ktype_patch's default_attrs with groups cpufreq: schedutil: Replace default_attrs field with groups padata: Replace padata_attr_type default_attrs field with groups irqdesc: Replace irq_kobj_type's default_attrs field with groups net-sysfs: Replace ktype default_attrs field with groups block: Replace all ktype default_attrs with groups samples/kobject: Replace foo_ktype's default_attrs field with groups kobject: Add support for default attribute groups to kobj_type driver core: Postpone DMA tear-down until after devres release for probe failure ...
2019-05-07net/sched: remove block pointer from common offload structurePieter Jansen van Vuuren
Based on feedback from Jiri avoid carrying a pointer to the tcf_block structure in the tc_cls_common_offload structure. Instead store a flag in driver private data which indicates if offloads apply to a shared block at block binding time. Suggested-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: ethernet: support of_get_mac_address new ERR_PTR errorPetr Štetiar
There was NVMEM support added to of_get_mac_address, so it could now return ERR_PTR encoded error values, so we need to adjust all current users of of_get_mac_address to this new fact. While at it, remove superfluous is_valid_ether_addr as the MAC address returned from of_get_mac_address is always valid and checked by is_valid_ether_addr anyway. Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Petr Štetiar <ynezz@true.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: dsa: support of_get_mac_address new ERR_PTR errorPetr Štetiar
There was NVMEM support added to of_get_mac_address, so it could now return ERR_PTR encoded error values, so we need to adjust all current users of of_get_mac_address to this new fact. While at it, remove superfluous is_valid_ether_addr as the MAC address returned from of_get_mac_address is always valid and checked by is_valid_ether_addr anyway. Fixes: d01f449c008a ("of_net: add NVMEM support to of_get_mac_address") Signed-off-by: Petr Štetiar <ynezz@true.cz> Tested-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07vrf: sit mtu should not be updated when vrf netdev is the linkStephen Suryaputra
VRF netdev mtu isn't typically set and have an mtu of 65536. When the link of a tunnel is set, the tunnel mtu is changed from 1480 to the link mtu minus tunnel header. In the case of VRF netdev is the link, then the tunnel mtu becomes 65516. So, fix it by not setting the tunnel mtu in this case. Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net: dsa: Fix error cleanup path in dsa_init_moduleYueHaibing
BUG: unable to handle kernel paging request at ffffffffa01c5430 PGD 3270067 P4D 3270067 PUD 3271063 PMD 230bc5067 PTE 0 Oops: 0000 [#1 CPU: 0 PID: 6159 Comm: modprobe Not tainted 5.1.0+ #33 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:raw_notifier_chain_register+0x16/0x40 Code: 63 f8 66 90 e9 5d ff ff ff 90 90 90 90 90 90 90 90 90 90 90 55 48 8b 07 48 89 e5 48 85 c0 74 1c 8b 56 10 3b 50 10 7e 07 eb 12 <39> 50 10 7c 0d 48 8d 78 08 48 8b 40 08 48 85 c0 75 ee 48 89 46 08 RSP: 0018:ffffc90001c33c08 EFLAGS: 00010282 RAX: ffffffffa01c5420 RBX: ffffffffa01db420 RCX: 4fcef45928070a8b RDX: 0000000000000000 RSI: ffffffffa01db420 RDI: ffffffffa01b0068 RBP: ffffc90001c33c08 R08: 000000003e0a33d0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000094443661 R12: ffff88822c320700 R13: ffff88823109be80 R14: 0000000000000000 R15: ffffc90001c33e78 FS: 00007fab8bd08540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffa01c5430 CR3: 00000002297ea000 CR4: 00000000000006f0 Call Trace: register_netdevice_notifier+0x43/0x250 ? 0xffffffffa01e0000 dsa_slave_register_notifier+0x13/0x70 [dsa_core ? 0xffffffffa01e0000 dsa_init_module+0x2e/0x1000 [dsa_core do_one_initcall+0x6c/0x3cc ? do_init_module+0x22/0x1f1 ? rcu_read_lock_sched_held+0x97/0xb0 ? kmem_cache_alloc_trace+0x325/0x3b0 do_init_module+0x5b/0x1f1 load_module+0x1db1/0x2690 ? m_show+0x1d0/0x1d0 __do_sys_finit_module+0xc5/0xd0 __x64_sys_finit_module+0x15/0x20 do_syscall_64+0x6b/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe Cleanup allocated resourses if there are errors, otherwise it will trgger memleak. Fixes: c9eb3e0f8701 ("net: dsa: Add support for learning FDB through notification") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07l2tp: Fix possible NULL pointer dereferenceYueHaibing
BUG: unable to handle kernel NULL pointer dereference at 0000000000000128 PGD 0 P4D 0 Oops: 0000 [#1 CPU: 0 PID: 5697 Comm: modprobe Tainted: G W 5.1.0-rc7+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.9.3-0-ge2fc41e-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:__lock_acquire+0x53/0x10b0 Code: 8b 1c 25 40 5e 01 00 4c 8b 6d 10 45 85 e4 0f 84 bd 06 00 00 44 8b 1d 7c d2 09 02 49 89 fe 41 89 d2 45 85 db 0f 84 47 02 00 00 <48> 81 3f a0 05 70 83 b8 00 00 00 00 44 0f 44 c0 83 fe 01 0f 86 3a RSP: 0018:ffffc90001c07a28 EFLAGS: 00010002 RAX: 0000000000000000 RBX: ffff88822f038440 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000128 RBP: ffffc90001c07a88 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001 R13: 0000000000000000 R14: 0000000000000128 R15: 0000000000000000 FS: 00007fead0811540(0000) GS:ffff888237a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000128 CR3: 00000002310da000 CR4: 00000000000006f0 Call Trace: ? __lock_acquire+0x24e/0x10b0 lock_acquire+0xdf/0x230 ? flush_workqueue+0x71/0x530 flush_workqueue+0x97/0x530 ? flush_workqueue+0x71/0x530 l2tp_exit_net+0x170/0x2b0 [l2tp_core ? l2tp_exit_net+0x93/0x2b0 [l2tp_core ops_exit_list.isra.6+0x36/0x60 unregister_pernet_operations+0xb8/0x110 unregister_pernet_device+0x25/0x40 l2tp_init+0x55/0x1000 [l2tp_core ? 0xffffffffa018d000 do_one_initcall+0x6c/0x3cc ? do_init_module+0x22/0x1f1 ? rcu_read_lock_sched_held+0x97/0xb0 ? kmem_cache_alloc_trace+0x325/0x3b0 do_init_module+0x5b/0x1f1 load_module+0x1db1/0x2690 ? m_show+0x1d0/0x1d0 __do_sys_finit_module+0xc5/0xd0 __x64_sys_finit_module+0x15/0x20 do_syscall_64+0x6b/0x1d0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fead031a839 Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007ffe8d9acca8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139 RAX: ffffffffffffffda RBX: 0000560078398b80 RCX: 00007fead031a839 RDX: 0000000000000000 RSI: 000056007659dc2e RDI: 0000000000000003 RBP: 000056007659dc2e R08: 0000000000000000 R09: 0000560078398b80 R10: 0000000000000003 R11: 0000000000000246 R12: 0000000000000000 R13: 00005600783a04a0 R14: 0000000000040000 R15: 0000560078398b80 Modules linked in: l2tp_core(+) e1000 ip_tables ipv6 [last unloaded: l2tp_core CR2: 0000000000000128 ---[ end trace 8322b2b8bf83f8e1 If alloc_workqueue fails in l2tp_init, l2tp_net_ops is unregistered on failure path. Then l2tp_exit_net is called which will flush NULL workqueue, this patch add a NULL check to fix it. Fixes: 67e04c29ec0d ("l2tp: unregister l2tp_net_ops on failure path") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07taprio: add null check on sched_nest to avoid potential null pointer dereferenceColin Ian King
The call to nla_nest_start_noflag can return a null pointer and currently this is not being checked and this can lead to a null pointer dereference when the null pointer sched_nest is passed to function nla_nest_end. Fix this by adding in a null pointer check. Addresses-Coverity: ("Dereference null return value") Fixes: a3d43c0d56f1 ("taprio: Add support adding an admin schedule") Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07Merge tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linuxLinus Torvalds
Pull stream_open conversion from Kirill Smelkov: - remove unnecessary double nonseekable_open from drivers/char/dtlk.c as noticed by Pavel Machek while reviewing nonseekable_open -> stream_open mass conversion. - the mass conversion patch promised in commit 10dce8af3422 ("fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock") and is automatically generated by running $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. More details on this in the patch. - finally, change VFS to pass ppos=NULL into .read/.write for files that declare themselves streams. It was suggested by Rasmus Villemoes and makes sure that if ppos starts to be erroneously used in a stream file, such bug won't go unnoticed and will produce an oops instead of creating illusion of position change being taken into account. Note: this patch does not conflict with "fuse: Add FOPEN_STREAM to use stream_open()" that will be hopefully coming via FUSE tree, because fs/fuse/ uses new-style .read_iter/.write_iter, and for these accessors position is still passed as non-pointer kiocb.ki_pos . * tag 'stream_open-5.2' of https://lab.nexedi.com/kirr/linux: vfs: pass ppos=NULL to .read()/.write() of FMODE_STREAM files *: convert stream-like files from nonseekable_open -> stream_open dtlk: remove double call to nonseekable_open
2019-05-07net_sched: sch_fq: handle non connected flowsEric Dumazet
FQ packet scheduler assumed that packets could be classified based on their owning socket. This means that if a UDP server uses one UDP socket to send packets to different destinations, packets all land in one FQ flow. This is unfair, since each TCP flow has a unique bucket, meaning that in case of pressure (fully utilised uplink), TCP flows have more share of the bandwidth. If we instead detect unconnected sockets, we can use a stochastic hash based on the 4-tuple hash. This also means a QUIC server using one UDP socket will properly spread the outgoing packets to different buckets, and in-kernel pacing based on EDT model will no longer risk having big rb-tree on one flow. Note that UDP application might provide the skb->hash in an ancillary message at sendmsg() time to avoid the cost of a dissection in fq packet scheduler. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07net_sched: sch_fq: do not assume EDT packets are orderedEric Dumazet
TCP stack makes sure packets for a given flow are monotically increasing, but we want to allow UDP packets to use EDT as well, so that QUIC servers can use in-kernel pacing. This patch adds a per-flow rb-tree on which packets might be stored. We still try to use the linear list for the typical cases where packets are queued with monotically increasing skb->tstamp, since queue/dequeue packets on a standard list is O(1). Note that the ability to store packets in arbitrary EDT order will allow us to implement later a per TCP socket mechanism adding delays (with jitter eventually) and reorders, to implement convenient network emulators. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07Merge branch 'work.icache' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull vfs inode freeing updates from Al Viro: "Introduction of separate method for RCU-delayed part of ->destroy_inode() (if any). Pretty much as posted, except that destroy_inode() stashes ->free_inode into the victim (anon-unioned with ->i_fops) before scheduling i_callback() and the last two patches (sockfs conversion and folding struct socket_wq into struct socket) are excluded - that pair should go through netdev once davem reopens his tree" * 'work.icache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (58 commits) orangefs: make use of ->free_inode() shmem: make use of ->free_inode() hugetlb: make use of ->free_inode() overlayfs: make use of ->free_inode() jfs: switch to ->free_inode() fuse: switch to ->free_inode() ext4: make use of ->free_inode() ecryptfs: make use of ->free_inode() ceph: use ->free_inode() btrfs: use ->free_inode() afs: switch to use of ->free_inode() dax: make use of ->free_inode() ntfs: switch to ->free_inode() securityfs: switch to ->free_inode() apparmor: switch to ->free_inode() rpcpipe: switch to ->free_inode() bpf: switch to ->free_inode() mqueue: switch to ->free_inode() ufs: switch to ->free_inode() coda: switch to ->free_inode() ...
2019-05-07Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf-next 2019-05-06 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Two AF_XDP libbpf fixes for socket teardown; first one an invalid munmap and the other one an invalid skmap cleanup, both from Björn. 2) More graceful CONFIG_DEBUG_INFO_BTF handling when pahole is not present in the system to generate vmlinux btf info, from Andrii. 3) Fix libbpf and thus fix perf build error with uClibc on arc architecture, from Vineet. 4) Fix missing libbpf_util.h header install in libbpf, from William. 5) Exclude bash-completion/bpftool from .gitignore pattern, from Masahiro. 6) Fix up rlimit in test_libbpf_open kselftest test case, from Yonghong. 7) Minor misc cleanups. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-07Merge tag 'printk-for-5.2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk Pull printk updates from Petr Mladek: - Allow state reset of printk_once() calls. - Prevent crashes when dereferencing invalid pointers in vsprintf(). Only the first byte is checked for simplicity. - Make vsprintf warnings consistent and inlined. - Treewide conversion of obsolete %pf, %pF to %ps, %pF printf modifiers. - Some clean up of vsprintf and test_printf code. * tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk: lib/vsprintf: Make function pointer_string static vsprintf: Limit the length of inlined error messages vsprintf: Avoid confusion between invalid address and value vsprintf: Prevent crash when dereferencing invalid pointers vsprintf: Consolidate handling of unknown pointer specifiers vsprintf: Factor out %pO handler as kobject_string() vsprintf: Factor out %pV handler as va_format() vsprintf: Factor out %p[iI] handler as ip_addr_string() vsprintf: Do not check address of well-known strings vsprintf: Consistent %pK handling for kptr_restrict == 0 vsprintf: Shuffle restricted_pointer() printk: Tie printk_once / printk_deferred_once into .data.once for reset treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively lib/test_printf: Switch to bitmap_zalloc()
2019-05-06Merge branch 'linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto update from Herbert Xu: "API: - Add support for AEAD in simd - Add fuzz testing to testmgr - Add panic_on_fail module parameter to testmgr - Use per-CPU struct instead multiple variables in scompress - Change verify API for akcipher Algorithms: - Convert x86 AEAD algorithms over to simd - Forbid 2-key 3DES in FIPS mode - Add EC-RDSA (GOST 34.10) algorithm Drivers: - Set output IV with ctr-aes in crypto4xx - Set output IV in rockchip - Fix potential length overflow with hashing in sun4i-ss - Fix computation error with ctr in vmx - Add SM4 protected keys support in ccree - Remove long-broken mxc-scc driver - Add rfc4106(gcm(aes)) cipher support in cavium/nitrox" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (179 commits) crypto: ccree - use a proper le32 type for le32 val crypto: ccree - remove set but not used variable 'du_size' crypto: ccree - Make cc_sec_disable static crypto: ccree - fix spelling mistake "protedcted" -> "protected" crypto: caam/qi2 - generate hash keys in-place crypto: caam/qi2 - fix DMA mapping of stack memory crypto: caam/qi2 - fix zero-length buffer DMA mapping crypto: stm32/cryp - update to return iv_out crypto: stm32/cryp - remove request mutex protection crypto: stm32/cryp - add weak key check for DES crypto: atmel - remove set but not used variable 'alg_name' crypto: picoxcell - Use dev_get_drvdata() crypto: crypto4xx - get rid of redundant using_sd variable crypto: crypto4xx - use sync skcipher for fallback crypto: crypto4xx - fix cfb and ofb "overran dst buffer" issues crypto: crypto4xx - fix ctr-aes missing output IV crypto: ecrdsa - select ASN1 and OID_REGISTRY for EC-RDSA crypto: ux500 - use ccflags-y instead of CFLAGS_<basename>.o crypto: ccree - handle tee fips error during power management resume crypto: ccree - add function to handle cryptocell tee fips error ...
2019-05-06Merge branch 'timers-core-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Ingo Molnar: "This cycle had the following changes: - Timer tracing improvements (Anna-Maria Gleixner) - Continued tasklet reduction work: remove the hrtimer_tasklet (Thomas Gleixner) - Fix CPU hotplug remove race in the tick-broadcast mask handling code (Thomas Gleixner) - Force upper bound for setting CLOCK_REALTIME, to fix ABI inconsistencies with handling values that are close to the maximum supported and the vagueness of when uptime related wraparound might occur. Make the consistent maximum the year 2232 across all relevant ABIs and APIs. (Thomas Gleixner) - various cleanups and smaller fixes" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick: Fix typos in comments tick/broadcast: Fix warning about undefined tick_broadcast_oneshot_offline() timekeeping: Force upper bound for setting CLOCK_REALTIME timer/trace: Improve timer tracing timer/trace: Replace deprecated vsprintf pointer extension %pf by %ps timer: Move trace point to get proper index tick/sched: Update tick_sched struct documentation tick: Remove outgoing CPU from broadcast masks timekeeping: Consistently use unsigned int for seqcount snapshot softirq: Remove tasklet_hrtimer xfrm: Replace hrtimer tasklet with softirq hrtimer mac80211_hwsim: Replace hrtimer tasklet with softirq hrtimer
2019-05-06Merge branch 'core-rcu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RCU updates from Ingo Molnar: "This cycles's RCU changes include: - a couple of straggling RCU flavor consolidation updates - SRCU updates - RCU CPU stall-warning updates - torture-test updates - an LKMM commit adding support for synchronize_srcu_expedited() - documentation updates - miscellaneous fixes" * 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (57 commits) net/ipv4/netfilter: Update comment from call_rcu_bh() to call_rcu() tools/memory-model: Add support for synchronize_srcu_expedited() doc/kprobes: Update obsolete RCU update functions torture: Suppress false-positive CONFIG_INITRAMFS_SOURCE complaint locktorture: NULL cxt.lwsa and cxt.lrsa to allow bad-arg detection rcuperf: Fix cleanup path for invalid perf_type strings rcutorture: Fix cleanup path for invalid torture_type strings rcutorture: Fix expected forward progress duration in OOM notifier rcutorture: Remove ->ext_irq_conflict field rcutorture: Make rcutorture_extend_mask() comment match the code tools/.../rcutorture: Convert to SPDX license identifier torture: Don't try to offline the last CPU rcu: Fix nohz status in stall warning rcu: Move forward-progress checkers into tree_stall.h rcu: Move irq-disabled stall-warning checking to tree_stall.h rcu: Organize functions in tree_stall.h rcu: Move FAST_NO_HZ stall-warning code to tree_stall.h rcu: Inline RCU stall-warning info helper functions rcu: Move rcu_print_task_exp_stall() to tree_exp.h rcu: Inline RCU task stall-warning helper functions ...
2019-05-06*: convert stream-like files from nonseekable_open -> stream_openKirill Smelkov
Using scripts/coccinelle/api/stream_open.cocci added in 10dce8af3422 ("fs: stream_open - opener for stream-like files so that read and write can run simultaneously without deadlock"), search and convert to stream_open all in-kernel nonseekable_open users for which read and write actually do not depend on ppos and where there is no other methods in file_operations which assume @offset access. I've verified each generated change manually - that it is correct to convert - and each other nonseekable_open instance left - that it is either not correct to convert there, or that it is not converted due to current stream_open.cocci limitations. The script also does not convert files that should be valid to convert, but that currently have .llseek = noop_llseek or generic_file_llseek for unknown reason despite file being opened with nonseekable_open (e.g. drivers/input/mousedev.c) Among cases converted 14 were potentially vulnerable to read vs write deadlock (see details in 10dce8af3422): drivers/char/pcmcia/cm4000_cs.c:1685:7-23: ERROR: cm4000_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/gnss/core.c:45:1-17: ERROR: gnss_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/hid/uhid.c:635:1-17: ERROR: uhid_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/infiniband/core/user_mad.c:988:1-17: ERROR: umad_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/evdev.c:527:1-17: ERROR: evdev_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/input/misc/uinput.c:401:1-17: ERROR: uinput_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/isdn/capi/capi.c:963:8-24: ERROR: capi_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/leds/uleds.c:77:1-17: ERROR: uleds_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/media/rc/lirc_dev.c:198:1-17: ERROR: lirc_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/s390/char/fs3270.c:488:1-17: ERROR: fs3270_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/usb/misc/ldusb.c:310:1-17: ERROR: ld_usb_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. drivers/xen/evtchn.c:667:8-24: ERROR: evtchn_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/batman-adv/icmp_socket.c:80:1-17: ERROR: batadv_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. net/rfkill/core.c:1146:8-24: ERROR: rfkill_fops: .read() can deadlock .write(); change nonseekable_open -> stream_open to fix. and the rest were just safe to convert to stream_open because their read and write do not use ppos at all and corresponding file_operations do not have methods that assume @offset file access(*): arch/powerpc/platforms/52xx/mpc52xx_gpt.c:631:8-24: WARNING: mpc52xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_ibox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_mbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/powerpc/platforms/cell/spufs/file.c:591:8-24: WARNING: spufs_wbox_stat_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. arch/um/drivers/harddog_kern.c:88:8-24: WARNING: harddog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. arch/x86/kernel/cpu/microcode/core.c:430:33-49: WARNING: microcode_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ds1620.c:215:8-24: WARNING: ds1620_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/dtlk.c:301:1-17: WARNING: dtlk_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/ipmi/ipmi_watchdog.c:840:9-25: WARNING: ipmi_wdog_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/pcmcia/scr24x_cs.c:95:8-24: WARNING: scr24x_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/char/tb0219.c:246:9-25: WARNING: tb0219_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/firewire/nosy.c:306:8-24: WARNING: nosy_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/fschmd.c:840:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/hwmon/w83793.c:1344:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucma.c:1747:8-24: WARNING: ucma_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/ucm.c:1178:8-24: WARNING: ucm_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/infiniband/core/uverbs_main.c:1086:8-24: WARNING: uverbs_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/input/joydev.c:282:1-17: WARNING: joydev_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/pci/switch/switchtec.c:393:1-17: WARNING: switchtec_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/platform/chrome/cros_ec_debugfs.c:135:8-24: WARNING: cros_ec_console_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-ds1374.c:470:9-25: WARNING: ds1374_wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/rtc/rtc-m41t80.c:805:9-25: WARNING: wdt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/tape_char.c:293:2-18: WARNING: tape_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/char/zcore.c:194:8-24: WARNING: zcore_reipl_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/s390/crypto/zcrypt_api.c:528:8-24: WARNING: zcrypt_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/spi/spidev.c:594:1-17: WARNING: spidev_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/staging/pi433/pi433_if.c:974:1-17: WARNING: pi433_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/acquirewdt.c:203:8-24: WARNING: acq_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/advantechwdt.c:202:8-24: WARNING: advwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim1535_wdt.c:252:8-24: WARNING: ali_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/alim7101_wdt.c:217:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ar7_wdt.c:166:8-24: WARNING: ar7_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/at91rm9200_wdt.c:113:8-24: WARNING: at91wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ath79_wdt.c:135:8-24: WARNING: ath79_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/bcm63xx_wdt.c:119:8-24: WARNING: bcm63xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpu5wdt.c:143:8-24: WARNING: cpu5wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/cpwd.c:397:8-24: WARNING: cpwd_fops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/eurotechwdt.c:319:8-24: WARNING: eurwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/f71808e_wdt.c:528:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/gef_wdt.c:232:8-24: WARNING: gef_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/geodewdt.c:95:8-24: WARNING: geodewdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ib700wdt.c:241:8-24: WARNING: ibwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ibmasr.c:326:8-24: WARNING: asr_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/indydog.c:80:8-24: WARNING: indydog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/intel_scu_watchdog.c:307:8-24: WARNING: intel_scu_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/iop_wdt.c:104:8-24: WARNING: iop_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/it8712f_wdt.c:330:8-24: WARNING: it8712f_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ixp4xx_wdt.c:68:8-24: WARNING: ixp4xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/ks8695_wdt.c:145:8-24: WARNING: ks8695wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/m54xx_wdt.c:88:8-24: WARNING: m54xx_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/machzwd.c:336:8-24: WARNING: zf_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mixcomwd.c:153:8-24: WARNING: mixcomwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mtx-1_wdt.c:121:8-24: WARNING: mtx1_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/mv64x60_wdt.c:136:8-24: WARNING: mv64x60_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nuc900_wdt.c:134:8-24: WARNING: nuc900wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/nv_tco.c:164:8-24: WARNING: nv_tco_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pc87413_wdt.c:289:8-24: WARNING: pc87413_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:698:8-24: WARNING: pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd.c:737:8-24: WARNING: pcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:581:8-24: WARNING: pcipcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_pci.c:623:8-24: WARNING: pcipcwd_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:488:8-24: WARNING: usb_pcwd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pcwd_usb.c:527:8-24: WARNING: usb_pcwd_temperature_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pika_wdt.c:121:8-24: WARNING: pikawdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/pnx833x_wdt.c:119:8-24: WARNING: pnx833x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rc32434_wdt.c:153:8-24: WARNING: rc32434_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/rdc321x_wdt.c:145:8-24: WARNING: rdc321x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/riowd.c:79:1-17: WARNING: riowd_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sa1100_wdt.c:62:8-24: WARNING: sa1100dog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc60xxwdt.c:211:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc7240_wdt.c:139:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc8360.c:274:8-24: WARNING: sbc8360_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_epx_c3.c:81:8-24: WARNING: epx_c3_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sbc_fitpc2_wdt.c:78:8-24: WARNING: fitpc2_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sb_wdog.c:108:1-17: WARNING: sbwdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc1200wdt.c:181:8-24: WARNING: sc1200wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sc520_wdt.c:261:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/sch311x_wdt.c:319:8-24: WARNING: sch311x_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/scx200_wdt.c:105:8-24: WARNING: scx200_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/smsc37b787_wdt.c:369:8-24: WARNING: wb_smsc_wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83877f_wdt.c:227:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/w83977f_wdt.c:301:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wafer5823wdt.c:200:8-24: WARNING: wafwdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/watchdog_dev.c:828:8-24: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:379:8-24: WARNING: wdrtas_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdrtas.c:445:8-24: WARNING: wdrtas_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt285.c:104:1-17: WARNING: watchdog_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt977.c:276:8-24: WARNING: wdt977_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:424:8-24: WARNING: wdt_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt.c:484:8-24: WARNING: wdt_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:464:8-24: WARNING: wdtpci_fops: .write() has stream semantic; safe to change nonseekable_open -> stream_open. drivers/watchdog/wdt_pci.c:527:8-24: WARNING: wdtpci_temp_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. net/batman-adv/log.c:105:1-17: WARNING: batadv_log_fops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/control.c:57:7-23: WARNING: snd_ctl_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. sound/core/rawmidi.c:385:7-23: WARNING: snd_rawmidi_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/seq/seq_clientmgr.c:310:7-23: WARNING: snd_seq_f_ops: .read() and .write() have stream semantic; safe to change nonseekable_open -> stream_open. sound/core/timer.c:1428:7-23: WARNING: snd_timer_f_ops: .read() has stream semantic; safe to change nonseekable_open -> stream_open. One can also recheck/review the patch via generating it with explanation comments included via $ make coccicheck MODE=patch COCCI=scripts/coccinelle/api/stream_open.cocci SPFLAGS="-D explain" (*) This second group also contains cases with read/write deadlocks that stream_open.cocci don't yet detect, but which are still valid to convert to stream_open since ppos is not used. For example drivers/pci/switch/switchtec.c calls wait_for_completion_interruptible() in its .read, but stream_open.cocci currently detects only "wait_event*" as blocking. Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yongzhi Pan <panyongzhi@gmail.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Juergen Gross <jgross@suse.com> Cc: Miklos Szeredi <miklos@szeredi.hu> Cc: Tejun Heo <tj@kernel.org> Cc: Kirill Tkhai <ktkhai@virtuozzo.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Nikolaus Rath <Nikolaus@rath.org> Cc: Han-Wen Nienhuys <hanwen@google.com> Cc: Anatolij Gustschin <agust@denx.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "James R. Van Zandt" <jrv@vanzandt.mv.com> Cc: Corey Minyard <minyard@acm.org> Cc: Harald Welte <laforge@gnumonks.org> Acked-by: Lubomir Rintel <lkundrak@v3.sk> [scr24x_cs] Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: Johan Hovold <johan@kernel.org> Cc: David Herrmann <dh.herrmann@googlemail.com> Cc: Jiri Kosina <jikos@kernel.org> Cc: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: Jean Delvare <jdelvare@suse.com> Acked-by: Guenter Roeck <linux@roeck-us.net> [watchdog/* hwmon/*] Cc: Rudolf Marek <r.marek@assembler.cz> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Karsten Keil <isdn@linux-pingi.de> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Kurt Schwemmer <kurt.schwemmer@microsemi.com> Acked-by: Logan Gunthorpe <logang@deltatee.com> [drivers/pci/switch/switchtec] Acked-by: Bjorn Helgaas <bhelgaas@google.com> [drivers/pci/switch/switchtec] Cc: Benson Leung <bleung@chromium.org> Acked-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> [platform/chrome] Cc: Alessandro Zummo <a.zummo@towertech.it> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> [rtc/*] Cc: Mark Brown <broonie@kernel.org> Cc: Wim Van Sebroeck <wim@linux-watchdog.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: bcm-kernel-feedback-list@broadcom.com Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: Zwane Mwaikambo <zwanem@gmail.com> Cc: Marek Lindner <mareklindner@neomailbox.ch> Cc: Simon Wunderlich <sw@simonwunderlich.de> Cc: Antonio Quartulli <a@unstable.cc> Cc: "David S. Miller" <davem@davemloft.net> Cc: Johannes Berg <johannes@sipsolutions.net> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Signed-off-by: Kirill Smelkov <kirr@nexedi.com>
2019-05-06batman-adv: mcast: fix multicast tt/tvlv worker lockingLinus Lüssing
Syzbot has reported some issues with the locking assumptions made for the multicast tt/tvlv worker: It was able to trigger the WARN_ON() in batadv_mcast_mla_tt_retract() and batadv_mcast_mla_tt_add(). While hard/not reproduceable for us so far it seems that the delayed_work_pending() we use might not be quite safe from reordering. Therefore this patch adds an explicit, new spinlock to protect the update of the mla_list and flags in bat_priv and then removes the WARN_ON(delayed_work_pending()). Reported-by: syzbot+83f2d54ec6b7e417e13f@syzkaller.appspotmail.com Reported-by: syzbot+050927a651272b145a5d@syzkaller.appspotmail.com Reported-by: syzbot+979ffc89b87309b1b94b@syzkaller.appspotmail.com Reported-by: syzbot+f9f3f388440283da2965@syzkaller.appspotmail.com Fixes: cbebd363b2e9 ("batman-adv: Use own timer for multicast TT and TVLV updates") Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by: Sven Eckelmann <sven@narfation.org> Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-05-06batman-adv: Start new development cycleSimon Wunderlich
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
2019-05-05sch_htb: redefine htb qdisc overlimitsCong Wang
In commit 3c75f6ee139d ("net_sched: sch_htb: add per class overlimits counter") we added an overlimits counter for each HTB class which could properly reflect how many times we use up all the bandwidth on each class. However, the overlimits counter in HTB qdisc does not, it is way bigger than the sum of each HTB class. In fact, this qdisc overlimits counter increases when we have no skb to dequeue, which happens more often than we run out of bandwidth. It makes more sense to make this qdisc overlimits counter just be a sum of each HTB class, in case people still get confused. I have verified this patch with one single HTB class, where HTB qdisc counters now always match HTB class counters as expected. Eric suggested we could fold this field into 'direct_pkts' as we only use its 32bit on 64bit CPU, this saves one cache line. Cc: Eric Dumazet <edumazet@google.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net: dsa: sja1105: Add support for traffic through standalone portsVladimir Oltean
In order to support this, we are creating a make-shift switch tag out of a VLAN trunk configured on the CPU port. Termination of normal traffic on switch ports only works when not under a vlan_filtering bridge. Termination of management (PTP, BPDU) traffic works under all circumstances because it uses a different tagging mechanism (incl_srcpt). We are making use of the generic CONFIG_NET_DSA_TAG_8021Q code and leveraging it from our own CONFIG_NET_DSA_TAG_SJA1105. There are two types of traffic: regular and link-local. The link-local traffic received on the CPU port is trapped from the switch's regular forwarding decisions because it matched one of the two DMAC filters for management traffic. On transmission, the switch requires special massaging for these link-local frames. Due to a weird implementation of the switching IP, by default it drops link-local frames that originate on the CPU port. It needs to be told where to forward them to, through an SPI command ("management route") that is valid for only a single frame. So when we're sending link-local traffic, we are using the dsa_defer_xmit mechanism. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net: dsa: Add support for deferred xmitVladimir Oltean
Some hardware needs to take work to get convinced to receive frames on the CPU port (such as the sja1105 which takes temporary L2 forwarding rules over SPI that last for a single frame). Such work needs a sleepable context, and because the regular .ndo_start_xmit is atomic, this cannot be done in the tagger. So introduce a generic DSA mechanism that sets up a transmit skb queue and a workqueue for deferred transmission. The new driver callback (.port_deferred_xmit) is in dsa_switch and not in the tagger because the operations that require sleeping typically also involve interacting with the hardware, and not simply skb manipulations. Therefore having it there simplifies the structure a bit and makes it unnecessary to export functions from the driver to the tagger. The driver is responsible of calling dsa_enqueue_skb which transfers it to the master netdevice. This is so that it has a chance of performing some more work afterwards, such as cleanup or TX timestamping. To tell DSA that skb xmit deferral is required, I have thought about changing the return type of the tagger .xmit from struct sk_buff * into a enum dsa_tx_t that could potentially encode a DSA_XMIT_DEFER value. But the trailer tagger is reallocating every skb on xmit and therefore making a valid use of the pointer return value. So instead of reworking the API in complicated ways, right now a boolean property in the newly introduced DSA_SKB_CB is set. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net: dsa: Allow drivers to filter packets they can decode source port fromVladimir Oltean
Frames get processed by DSA and redirected to switch port net devices based on the ETH_P_XDSA multiplexed packet_type handler found by the network stack when calling eth_type_trans(). The running assumption is that once the DSA .rcv function is called, DSA is always able to decode the switch tag in order to change the skb->dev from its master. However there are tagging protocols (such as the new DSA_TAG_PROTO_SJA1105, user of DSA_TAG_PROTO_8021Q) where this assumption is not completely true, since switch tagging piggybacks on the absence of a vlan_filtering bridge. Moreover, management traffic (BPDU, PTP) for this switch doesn't rely on switch tagging, but on a different mechanism. So it would make sense to at least be able to terminate that. Having DSA receive traffic it can't decode would put it in an impossible situation: the eth_type_trans() function would invoke the DSA .rcv(), which could not change skb->dev, then eth_type_trans() would be invoked again, which again would call the DSA .rcv, and the packet would never be able to exit the DSA filter and would spiral in a loop until the whole system dies. This happens because eth_type_trans() doesn't actually look at the skb (so as to identify a potential tag) when it deems it as being ETH_P_XDSA. It just checks whether skb->dev has a DSA private pointer installed (therefore it's a DSA master) and that there exists a .rcv callback (everybody except DSA_TAG_PROTO_NONE has that). This is understandable as there are many switch tags out there, and exhaustively checking for all of them is far from ideal. The solution lies in introducing a filtering function for each tagging protocol. In the absence of a filtering function, all traffic is passed to the .rcv DSA callback. The tagging protocol should see the filtering function as a pre-validation that it can decode the incoming skb. The traffic that doesn't match the filter will bypass the DSA .rcv callback and be left on the master netdevice, which wasn't previously possible. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net: dsa: Optional VLAN-based port separation for switches without taggingVladimir Oltean
This patch provides generic DSA code for using VLAN (802.1Q) tags for the same purpose as a dedicated switch tag for injection/extraction. It is based on the discussions and interest that has been so far expressed in https://www.spinics.net/lists/netdev/msg556125.html. Unlike all other DSA-supported tagging protocols, CONFIG_NET_DSA_TAG_8021Q does not offer a complete solution for drivers (nor can it). Instead, it provides generic code that driver can opt into calling: - dsa_8021q_xmit: Inserts a VLAN header with the specified contents. Can be called from another tagging protocol's xmit function. Currently the LAN9303 driver is inserting headers that are simply 802.1Q with custom fields, so this is an opportunity for code reuse. - dsa_8021q_rcv: Retrieves the TPID and TCI from a VLAN-tagged skb. Removing the VLAN header is left as a decision for the caller to make. - dsa_port_setup_8021q_tagging: For each user port, installs an Rx VID and a Tx VID, for proper untagged traffic identification on ingress and steering on egress. Also sets up the VLAN trunk on the upstream (CPU or DSA) port. Drivers are intentionally left to call this function explicitly, depending on the context and hardware support. The expected switch behavior and VLAN semantics should not be violated under any conditions. That is, after calling dsa_port_setup_8021q_tagging, the hardware should still pass all ingress traffic, be it tagged or untagged. For uniformity with the other tagging protocols, a module for the dsa_8021q_netdev_ops structure is registered, but the typical usage is to set up another tagging protocol which selects CONFIG_NET_DSA_TAG_8021Q, and calls the API from tag_8021q.h. Null function definitions are also provided so that a "depends on" is not forced in the Kconfig. This tagging protocol only works when switch ports are standalone, or when they are added to a VLAN-unaware bridge. It will probably remain this way for the reasons below. When added to a bridge that has vlan_filtering 1, the bridge core will install its own VLANs and reset the pvids through switchdev. For the bridge core, switchdev is a write-only pipe. All VLAN-related state is kept in the bridge core and nothing is read from DSA/switchdev or from the driver. So the bridge core will break this port separation because it will install the vlan_default_pvid into all switchdev ports. Even if we could teach the bridge driver about switchdev preference of a certain vlan_default_pvid (task difficult in itself since the current setting is per-bridge but we would need it per-port), there would still exist many other challenges. Firstly, in the DSA rcv callback, a driver would have to perform an iterative reverse lookup to find the correct switch port. That is because the port is a bridge slave, so its Rx VID (port PVID) is subject to user configuration. How would we ensure that the user doesn't reset the pvid to a different value (which would make an O(1) translation impossible), or to a non-unique value within this DSA switch tree (which would make any translation impossible)? Finally, not all switch ports are equal in DSA, and that makes it difficult for the bridge to be completely aware of this anyway. The CPU port needs to transmit tagged packets (VLAN trunk) in order for the DSA rcv code to be able to decode source information. But the bridge code has absolutely no idea which switch port is the CPU port, if nothing else then just because there is no netdevice registered by DSA for the CPU port. Also DSA does not currently allow the user to specify that they want the CPU port to do VLAN trunking anyway. VLANs are added to the CPU port using the same flags as they were added on the user port. So the VLANs installed by dsa_port_setup_8021q_tagging per driver request should remain private from the bridge's and user's perspective, and should not alter the VLAN semantics observed by the user. In the current implementation a VLAN range ending at 4095 (VLAN_N_VID) is reserved for this purpose. Each port receives a unique Rx VLAN and a unique Tx VLAN. Separate VLANs are needed for Rx and Tx because they serve different purposes: on Rx the switch must process traffic as untagged and process it with a port-based VLAN, but with care not to hinder bridging. On the other hand, the Tx VLAN is where the reachability restrictions are imposed, since by tagging frames in the xmit callback we are telling the switch onto which port to steer the frame. Some general guidance on how this support might be employed for real-life hardware (some comments made by Florian Fainelli): - If the hardware supports VLAN tag stacking, it should somehow back up its private VLAN settings when the bridge tries to override them. Then the driver could re-apply them as outer tags. Dedicating an outer tag per bridge device would allow identical inner tag VID numbers to co-exist, yet preserve broadcast domain isolation. - If the switch cannot handle VLAN tag stacking, it should disable this port separation when added as slave to a vlan_filtering bridge, in that case having reduced functionality. - Drivers for old switches that don't support the entire VLAN_N_VID range will need to rework the current range selection mechanism. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net: dsa: Export symbols for dsa_port_vid_{add, del}Vladimir Oltean
This is needed so that the newly introduced tag_8021q may access these core DSA functions when built as a module. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net: dsa: Call driver's setup callback after setting up its switchdev notifierVladimir Oltean
This allows the driver to perform some manipulations of its own during setup, using generic switchdev calls. Having the notifiers registered at setup time is important because otherwise any switchdev transaction emitted during this time would be ignored (dispatched to an empty call chain). One current usage scenario is for the driver to request DSA to set up 802.1Q based switch tagging for its ports. There is no danger for the driver setup code to start racing now with switchdev events emitted from the network stack (such as bridge core) even if the notifier is registered earlier. This is because the network stack needs a net_device as a vehicle to perform switchdev operations, and the slave net_devices are registered later than the core driver setup anyway (ds->ops->setup in dsa_switch_setup vs dsa_port_setup). Luckily DSA doesn't need a net_device to carry out switchdev callbacks, and therefore drivers shouldn't assume either that net_devices are available at the time their switchdev callbacks get invoked. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Vivien Didelot <vivien.didelot@gmail.com>- Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net/sched: add block pointer to tc_cls_common_offload structurePieter Jansen van Vuuren
Some actions like the police action are stateful and could share state between devices. This is incompatible with offloading to multiple devices and drivers might want to test for shared blocks when offloading. Store a pointer to the tcf_block structure in the tc_cls_common_offload structure to allow drivers to determine when offloads apply to a shared block. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net/sched: allow stats updates from offloaded police actionsPieter Jansen van Vuuren
Implement the stats_update callback for the police action that will be used by drivers for hardware offload. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net/sched: extend matchall offload for hardware statisticsPieter Jansen van Vuuren
Introduce a new command for matchall classifiers that allows hardware to update statistics. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-05net/sched: add police action to the hardware intermediate representationPieter Jansen van Vuuren
Add police action to the hardware intermediate representation which would subsequently allow it to be used by drivers for offload. Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>