summaryrefslogtreecommitdiff
path: root/net
AgeCommit message (Collapse)Author
2024-11-26tcp_bpf: Fix the sk_mem_uncharge logic in tcp_bpf_sendmsgZijian Zhang
The current sk memory accounting logic in __SK_REDIRECT is pre-uncharging tosend bytes, which is either msg->sg.size or a smaller value apply_bytes. Potential problems with this strategy are as follows: - If the actual sent bytes are smaller than tosend, we need to charge some bytes back, as in line 487, which is okay but seems not clean. - When tosend is set to apply_bytes, as in line 417, and (ret < 0), we may miss uncharging (msg->sg.size - apply_bytes) bytes. [...] 415 tosend = msg->sg.size; 416 if (psock->apply_bytes && psock->apply_bytes < tosend) 417 tosend = psock->apply_bytes; [...] 443 sk_msg_return(sk, msg, tosend); 444 release_sock(sk); 446 origsize = msg->sg.size; 447 ret = tcp_bpf_sendmsg_redir(sk_redir, redir_ingress, 448 msg, tosend, flags); 449 sent = origsize - msg->sg.size; [...] 454 lock_sock(sk); 455 if (unlikely(ret < 0)) { 456 int free = sk_msg_free_nocharge(sk, msg); 458 if (!cork) 459 *copied -= free; 460 } [...] 487 if (eval == __SK_REDIRECT) 488 sk_mem_charge(sk, tosend - sent); [...] When running the selftest test_txmsg_redir_wait_sndmem with txmsg_apply, the following warning will be reported: ------------[ cut here ]------------ WARNING: CPU: 6 PID: 57 at net/ipv4/af_inet.c:156 inet_sock_destruct+0x190/0x1a0 Modules linked in: CPU: 6 UID: 0 PID: 57 Comm: kworker/6:0 Not tainted 6.12.0-rc1.bm.1-amd64+ #43 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014 Workqueue: events sk_psock_destroy RIP: 0010:inet_sock_destruct+0x190/0x1a0 RSP: 0018:ffffad0a8021fe08 EFLAGS: 00010206 RAX: 0000000000000011 RBX: ffff9aab4475b900 RCX: ffff9aab481a0800 RDX: 0000000000000303 RSI: 0000000000000011 RDI: ffff9aab4475b900 RBP: ffff9aab4475b990 R08: 0000000000000000 R09: ffff9aab40050ec0 R10: 0000000000000000 R11: ffff9aae6fdb1d01 R12: ffff9aab49c60400 R13: ffff9aab49c60598 R14: ffff9aab49c60598 R15: dead000000000100 FS: 0000000000000000(0000) GS:ffff9aae6fd80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007ffec7e47bd8 CR3: 00000001a1a1c004 CR4: 0000000000770ef0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <TASK> ? __warn+0x89/0x130 ? inet_sock_destruct+0x190/0x1a0 ? report_bug+0xfc/0x1e0 ? handle_bug+0x5c/0xa0 ? exc_invalid_op+0x17/0x70 ? asm_exc_invalid_op+0x1a/0x20 ? inet_sock_destruct+0x190/0x1a0 __sk_destruct+0x25/0x220 sk_psock_destroy+0x2b2/0x310 process_scheduled_works+0xa3/0x3e0 worker_thread+0x117/0x240 ? __pfx_worker_thread+0x10/0x10 kthread+0xcf/0x100 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x31/0x40 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1a/0x30 </TASK> ---[ end trace 0000000000000000 ]--- In __SK_REDIRECT, a more concise way is delaying the uncharging after sent bytes are finalized, and uncharge this value. When (ret < 0), we shall invoke sk_msg_free. Same thing happens in case __SK_DROP, when tosend is set to apply_bytes, we may miss uncharging (msg->sg.size - apply_bytes) bytes. The same warning will be reported in selftest. [...] 468 case __SK_DROP: 469 default: 470 sk_msg_free_partial(sk, msg, tosend); 471 sk_msg_apply_bytes(psock, tosend); 472 *copied -= (tosend + delta); 473 return -EACCES; [...] So instead of sk_msg_free_partial we can do sk_msg_free here. Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface") Fixes: 8ec95b94716a ("bpf, sockmap: Fix the sk->sk_forward_alloc warning of sk_stream_kill_queues") Signed-off-by: Zijian Zhang <zijianzhang@bytedance.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/20241016234838.3167769-3-zijianzhang@bytedance.com
2024-11-26Bluetooth: SCO: remove the redundant sco_conn_putEdward Adam Davis
When adding conn, it is necessary to increase and retain the conn reference count at the same time. Another problem was fixed along the way, conn_put is missing when hcon is NULL in the timeout routine. Fixes: e6720779ae61 ("Bluetooth: SCO: Use kref to track lifetime of sco_conn") Reported-and-tested-by: syzbot+489f78df4709ac2bfdd3@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=489f78df4709ac2bfdd3 Signed-off-by: Edward Adam Davis <eadavis@qq.com> Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-26Bluetooth: MGMT: Fix possible deadlocksLuiz Augusto von Dentz
This fixes possible deadlocks like the following caused by hci_cmd_sync_dequeue causing the destroy function to run: INFO: task kworker/u19:0:143 blocked for more than 120 seconds. Tainted: G W O 6.8.0-2024-03-19-intel-next-iLS-24ww14 #1 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:kworker/u19:0 state:D stack:0 pid:143 tgid:143 ppid:2 flags:0x00004000 Workqueue: hci0 hci_cmd_sync_work [bluetooth] Call Trace: <TASK> __schedule+0x374/0xaf0 schedule+0x3c/0xf0 schedule_preempt_disabled+0x1c/0x30 __mutex_lock.constprop.0+0x3ef/0x7a0 __mutex_lock_slowpath+0x13/0x20 mutex_lock+0x3c/0x50 mgmt_set_connectable_complete+0xa4/0x150 [bluetooth] ? kfree+0x211/0x2a0 hci_cmd_sync_dequeue+0xae/0x130 [bluetooth] ? __pfx_cmd_complete_rsp+0x10/0x10 [bluetooth] cmd_complete_rsp+0x26/0x80 [bluetooth] mgmt_pending_foreach+0x4d/0x70 [bluetooth] __mgmt_power_off+0x8d/0x180 [bluetooth] ? _raw_spin_unlock_irq+0x23/0x40 hci_dev_close_sync+0x445/0x5b0 [bluetooth] hci_set_powered_sync+0x149/0x250 [bluetooth] set_powered_sync+0x24/0x60 [bluetooth] hci_cmd_sync_work+0x90/0x150 [bluetooth] process_one_work+0x13e/0x300 worker_thread+0x2f7/0x420 ? __pfx_worker_thread+0x10/0x10 kthread+0x107/0x140 ? __pfx_kthread+0x10/0x10 ret_from_fork+0x3d/0x60 ? __pfx_kthread+0x10/0x10 ret_from_fork_asm+0x1b/0x30 </TASK> Tested-by: Kiran K <kiran.k@intel.com> Fixes: f53e1c9c726d ("Bluetooth: MGMT: Fix possible crash on mgmt_index_removed") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-26Bluetooth: MGMT: Fix slab-use-after-free Read in set_powered_syncLuiz Augusto von Dentz
This fixes the following crash: ================================================================== BUG: KASAN: slab-use-after-free in set_powered_sync+0x3a/0xc0 net/bluetooth/mgmt.c:1353 Read of size 8 at addr ffff888029b4dd18 by task kworker/u9:0/54 CPU: 1 UID: 0 PID: 54 Comm: kworker/u9:0 Not tainted 6.11.0-rc6-syzkaller-01155-gf723224742fc #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 08/06/2024 Workqueue: hci0 hci_cmd_sync_work Call Trace: <TASK> __dump_stack lib/dump_stack.c:93 [inline] dump_stack_lvl+0x241/0x360 lib/dump_stack.c:119 print_address_description mm/kasan/report.c:377 [inline] print_report+0x169/0x550 mm/kasan/report.c:488 q kasan_report+0x143/0x180 mm/kasan/report.c:601 set_powered_sync+0x3a/0xc0 net/bluetooth/mgmt.c:1353 hci_cmd_sync_work+0x22b/0x400 net/bluetooth/hci_sync.c:328 process_one_work kernel/workqueue.c:3231 [inline] process_scheduled_works+0xa2c/0x1830 kernel/workqueue.c:3312 worker_thread+0x86d/0xd10 kernel/workqueue.c:3389 kthread+0x2f0/0x390 kernel/kthread.c:389 ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:244 </TASK> Allocated by task 5247: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 poison_kmalloc_redzone mm/kasan/common.c:370 [inline] __kasan_kmalloc+0x98/0xb0 mm/kasan/common.c:387 kasan_kmalloc include/linux/kasan.h:211 [inline] __kmalloc_cache_noprof+0x19c/0x2c0 mm/slub.c:4193 kmalloc_noprof include/linux/slab.h:681 [inline] kzalloc_noprof include/linux/slab.h:807 [inline] mgmt_pending_new+0x65/0x250 net/bluetooth/mgmt_util.c:269 mgmt_pending_add+0x36/0x120 net/bluetooth/mgmt_util.c:296 set_powered+0x3cd/0x5e0 net/bluetooth/mgmt.c:1394 hci_mgmt_cmd+0xc47/0x11d0 net/bluetooth/hci_sock.c:1712 hci_sock_sendmsg+0x7b8/0x11c0 net/bluetooth/hci_sock.c:1832 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x221/0x270 net/socket.c:745 sock_write_iter+0x2dd/0x400 net/socket.c:1160 new_sync_write fs/read_write.c:497 [inline] vfs_write+0xa72/0xc90 fs/read_write.c:590 ksys_write+0x1a0/0x2c0 fs/read_write.c:643 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Freed by task 5246: kasan_save_stack mm/kasan/common.c:47 [inline] kasan_save_track+0x3f/0x80 mm/kasan/common.c:68 kasan_save_free_info+0x40/0x50 mm/kasan/generic.c:579 poison_slab_object+0xe0/0x150 mm/kasan/common.c:240 __kasan_slab_free+0x37/0x60 mm/kasan/common.c:256 kasan_slab_free include/linux/kasan.h:184 [inline] slab_free_hook mm/slub.c:2256 [inline] slab_free mm/slub.c:4477 [inline] kfree+0x149/0x360 mm/slub.c:4598 settings_rsp+0x2bc/0x390 net/bluetooth/mgmt.c:1443 mgmt_pending_foreach+0xd1/0x130 net/bluetooth/mgmt_util.c:259 __mgmt_power_off+0x112/0x420 net/bluetooth/mgmt.c:9455 hci_dev_close_sync+0x665/0x11a0 net/bluetooth/hci_sync.c:5191 hci_dev_do_close net/bluetooth/hci_core.c:483 [inline] hci_dev_close+0x112/0x210 net/bluetooth/hci_core.c:508 sock_do_ioctl+0x158/0x460 net/socket.c:1222 sock_ioctl+0x629/0x8e0 net/socket.c:1341 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:907 [inline] __se_sys_ioctl+0xfc/0x170 fs/ioctl.c:893 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83gv entry_SYSCALL_64_after_hwframe+0x77/0x7f Reported-by: syzbot+03d6270b6425df1605bf@syzkaller.appspotmail.com Tested-by: syzbot+03d6270b6425df1605bf@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=03d6270b6425df1605bf Fixes: 275f3f648702 ("Bluetooth: Fix not checking MGMT cmd pending queue") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
2024-11-26net: hsr: fix hsr_init_sk() vs network/transport headers.Eric Dumazet
Following sequence in hsr_init_sk() is invalid : skb_reset_mac_header(skb); skb_reset_mac_len(skb); skb_reset_network_header(skb); skb_reset_transport_header(skb); It is invalid because skb_reset_mac_len() needs the correct network header, which should be after the mac header. This patch moves the skb_reset_network_header() and skb_reset_transport_header() before the call to dev_hard_header(). As a result skb->mac_len is no longer set to a value close to 65535. Fixes: 48b491a5cc74 ("net: hsr: fix mac_len checks") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: George McCollister <george.mccollister@gmail.com> Link: https://patch.msgid.link/20241122171343.897551-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-26net/ipv6: delete temporary address if mngtmpaddr is removed or unmanagedHangbin Liu
RFC8981 section 3.4 says that existing temporary addresses must have their lifetimes adjusted so that no temporary addresses should ever remain "valid" or "preferred" longer than the incoming SLAAC Prefix Information. This would strongly imply in Linux's case that if the "mngtmpaddr" address is deleted or un-flagged as such, its corresponding temporary addresses must be cleared out right away. But now the temporary address is renewed even after ‘mngtmpaddr’ is removed or becomes unmanaged as manage_tempaddrs() set temporary addresses prefered/valid time to 0, and later in addrconf_verify_rtnl() all checkings failed to remove the addresses. Fix this by deleting the temporary address directly for these situations. Fixes: 778964f2fdf0 ("ipv6/addrconf: fix timing bug in tempaddr regen") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-26s390/iucv: MSG_PEEK causes memory leak in iucv_sock_destruct()Sidraya Jayagond
Passing MSG_PEEK flag to skb_recv_datagram() increments skb refcount (skb->users) and iucv_sock_recvmsg() does not decrement skb refcount at exit. This results in skb memory leak in skb_queue_purge() and WARN_ON in iucv_sock_destruct() during socket close. To fix this decrease skb refcount by one if MSG_PEEK is set in order to prevent memory leak and WARN_ON. WARNING: CPU: 2 PID: 6292 at net/iucv/af_iucv.c:286 iucv_sock_destruct+0x144/0x1a0 [af_iucv] CPU: 2 PID: 6292 Comm: afiucv_test_msg Kdump: loaded Tainted: G W 6.10.0-rc7 #1 Hardware name: IBM 3931 A01 704 (z/VM 7.3.0) Call Trace: [<001587c682c4aa98>] iucv_sock_destruct+0x148/0x1a0 [af_iucv] [<001587c682c4a9d0>] iucv_sock_destruct+0x80/0x1a0 [af_iucv] [<001587c704117a32>] __sk_destruct+0x52/0x550 [<001587c704104a54>] __sock_release+0xa4/0x230 [<001587c704104c0c>] sock_close+0x2c/0x40 [<001587c702c5f5a8>] __fput+0x2e8/0x970 [<001587c7024148c4>] task_work_run+0x1c4/0x2c0 [<001587c7023b0716>] do_exit+0x996/0x1050 [<001587c7023b13aa>] do_group_exit+0x13a/0x360 [<001587c7023b1626>] __s390x_sys_exit_group+0x56/0x60 [<001587c7022bccca>] do_syscall+0x27a/0x380 [<001587c7049a6a0c>] __do_syscall+0x9c/0x160 [<001587c7049ce8a8>] system_call+0x70/0x98 Last Breaking-Event-Address: [<001587c682c4a9d4>] iucv_sock_destruct+0x84/0x1a0 [af_iucv] Fixes: eac3731bd04c ("[S390]: Add AF_IUCV socket support") Reviewed-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com> Signed-off-by: Sidraya Jayagond <sidraya@linux.ibm.com> Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: David Wei <dw@davidwei.uk> Link: https://patch.msgid.link/20241119152219.3712168-1-wintera@linux.ibm.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-26net/l2tp: fix warning in l2tp_exit_net found by syzbotJames Chapman
In l2tp's net exit handler, we check that an IDR is empty before destroying it: WARN_ON_ONCE(!idr_is_empty(&pn->l2tp_tunnel_idr)); idr_destroy(&pn->l2tp_tunnel_idr); By forcing memory allocation failures in idr_alloc_32, syzbot is able to provoke a condition where idr_is_empty returns false despite there being no items in the IDR. This turns out to be because the radix tree of the IDR contains only internal radix-tree nodes and it is this that causes idr_is_empty to return false. The internal nodes are cleaned by idr_destroy. Use idr_for_each to check that the IDR is empty instead of idr_is_empty to avoid the problem. Reported-by: syzbot+332fe1e67018625f63c9@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=332fe1e67018625f63c9 Fixes: 73d33bd063c4 ("l2tp: avoid using drain_workqueue in l2tp_pre_exit_net") Signed-off-by: James Chapman <jchapman@katalix.com> Link: https://patch.msgid.link/20241118140411.1582555-1-jchapman@katalix.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-25xsk: always clear DMA mapping information when unmapping the poolLarysa Zaremba
When the umem is shared, the DMA mapping is also shared between the xsk pools, therefore it should stay valid as long as at least 1 user remains. However, the pool also keeps the copies of DMA-related information that are initialized in the same way in xp_init_dma_info(), but cleared by xp_dma_unmap() only for the last remaining pool, this causes the problems below. The first one is that the commit adbf5a42341f ("ice: remove af_xdp_zc_qps bitmap") relies on pool->dev to determine the presence of a ZC pool on a given queue, avoiding internal bookkeeping. This works perfectly fine if the UMEM is not shared, but reliably fails otherwise as stated in the linked report. The second one is pool->dma_pages which is dynamically allocated and only freed in xp_dma_unmap(), this leads to a small memory leak. kmemleak does not catch it, but by printing the allocation results after terminating the userspace program it is possible to see that all addresses except the one belonging to the last detached pool are still accessible through the kmemleak dump functionality. Always clear the DMA mapping information from the pool and free pool->dma_pages when unmapping the pool, so that the only difference between results of the last remaining user's call and the ones before would be the destruction of the DMA mapping. Fixes: adbf5a42341f ("ice: remove af_xdp_zc_qps bitmap") Fixes: 921b68692abb ("xsk: Enable sharing of dma mappings") Reported-by: Alasdair McWilliam <alasdair.mcwilliam@outlook.com> Closes: https://lore.kernel.org/PA4P194MB10056F208AF221D043F57A3D86512@PA4P194MB1005.EURP194.PROD.OUTLOOK.COM Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by: Larysa Zaremba <larysa.zaremba@intel.com> Link: https://lore.kernel.org/r/20241122112912.89881-1-larysa.zaremba@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-11-25xsk: fix OOB map writes when deleting elementsMaciej Fijalkowski
Jordy says: " In the xsk_map_delete_elem function an unsigned integer (map->max_entries) is compared with a user-controlled signed integer (k). Due to implicit type conversion, a large unsigned value for map->max_entries can bypass the intended bounds check: if (k >= map->max_entries) return -EINVAL; This allows k to hold a negative value (between -2147483648 and -2), which is then used as an array index in m->xsk_map[k], which results in an out-of-bounds access. spin_lock_bh(&m->lock); map_entry = &m->xsk_map[k]; // Out-of-bounds map_entry old_xs = unrcu_pointer(xchg(map_entry, NULL)); // Oob write if (old_xs) xsk_map_sock_delete(old_xs, map_entry); spin_unlock_bh(&m->lock); The xchg operation can then be used to cause an out-of-bounds write. Moreover, the invalid map_entry passed to xsk_map_sock_delete can lead to further memory corruption. " It indeed results in following splat: [76612.897343] BUG: unable to handle page fault for address: ffffc8fc2e461108 [76612.904330] #PF: supervisor write access in kernel mode [76612.909639] #PF: error_code(0x0002) - not-present page [76612.914855] PGD 0 P4D 0 [76612.917431] Oops: Oops: 0002 [#1] PREEMPT SMP [76612.921859] CPU: 11 UID: 0 PID: 10318 Comm: a.out Not tainted 6.12.0-rc1+ #470 [76612.929189] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [76612.939781] RIP: 0010:xsk_map_delete_elem+0x2d/0x60 [76612.944738] Code: 00 00 41 54 55 53 48 63 2e 3b 6f 24 73 38 4c 8d a7 f8 00 00 00 48 89 fb 4c 89 e7 e8 2d bf 05 00 48 8d b4 eb 00 01 00 00 31 ff <48> 87 3e 48 85 ff 74 05 e8 16 ff ff ff 4c 89 e7 e8 3e bc 05 00 31 [76612.963774] RSP: 0018:ffffc9002e407df8 EFLAGS: 00010246 [76612.969079] RAX: 0000000000000000 RBX: ffffc9002e461000 RCX: 0000000000000000 [76612.976323] RDX: 0000000000000001 RSI: ffffc8fc2e461108 RDI: 0000000000000000 [76612.983569] RBP: ffffffff80000001 R08: 0000000000000000 R09: 0000000000000007 [76612.990812] R10: ffffc9002e407e18 R11: ffff888108a38858 R12: ffffc9002e4610f8 [76612.998060] R13: ffff888108a38858 R14: 00007ffd1ae0ac78 R15: ffffc9002e4610c0 [76613.005303] FS: 00007f80b6f59740(0000) GS:ffff8897e0ec0000(0000) knlGS:0000000000000000 [76613.013517] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [76613.019349] CR2: ffffc8fc2e461108 CR3: 000000011e3ef001 CR4: 00000000007726f0 [76613.026595] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [76613.033841] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [76613.041086] PKRU: 55555554 [76613.043842] Call Trace: [76613.046331] <TASK> [76613.048468] ? __die+0x20/0x60 [76613.051581] ? page_fault_oops+0x15a/0x450 [76613.055747] ? search_extable+0x22/0x30 [76613.059649] ? search_bpf_extables+0x5f/0x80 [76613.063988] ? exc_page_fault+0xa9/0x140 [76613.067975] ? asm_exc_page_fault+0x22/0x30 [76613.072229] ? xsk_map_delete_elem+0x2d/0x60 [76613.076573] ? xsk_map_delete_elem+0x23/0x60 [76613.080914] __sys_bpf+0x19b7/0x23c0 [76613.084555] __x64_sys_bpf+0x1a/0x20 [76613.088194] do_syscall_64+0x37/0xb0 [76613.091832] entry_SYSCALL_64_after_hwframe+0x4b/0x53 [76613.096962] RIP: 0033:0x7f80b6d1e88d [76613.100592] Code: 5b 41 5c c3 66 0f 1f 84 00 00 00 00 00 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 b5 0f 00 f7 d8 64 89 01 48 [76613.119631] RSP: 002b:00007ffd1ae0ac68 EFLAGS: 00000206 ORIG_RAX: 0000000000000141 [76613.131330] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f80b6d1e88d [76613.142632] RDX: 0000000000000098 RSI: 00007ffd1ae0ad20 RDI: 0000000000000003 [76613.153967] RBP: 00007ffd1ae0adc0 R08: 0000000000000000 R09: 0000000000000000 [76613.166030] R10: 00007f80b6f77040 R11: 0000000000000206 R12: 00007ffd1ae0aed8 [76613.177130] R13: 000055ddf42ce1e9 R14: 000055ddf42d0d98 R15: 00007f80b6fab040 [76613.188129] </TASK> Fix this by simply changing key type from int to u32. Fixes: fbfc504a24f5 ("bpf: introduce new bpf AF_XDP map type BPF_MAP_TYPE_XSKMAP") CC: stable@vger.kernel.org Reported-by: Jordy Zomer <jordyzomer@google.com> Suggested-by: Jordy Zomer <jordyzomer@google.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/r/20241122121030.716788-2-maciej.fijalkowski@intel.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-11-25bpf, vsock: Invoke proto::close on close()Michal Luczaj
vsock defines a BPF callback to be invoked when close() is called. However, this callback is never actually executed. As a result, a closed vsock socket is not automatically removed from the sockmap/sockhash. Introduce a dummy vsock_close() and make vsock_release() call proto::close. Note: changes in __vsock_release() look messy, but it's only due to indent level reduction and variables xmas tree reorder. Fixes: 634f1a7110b4 ("vsock: support sockmap") Signed-off-by: Michal Luczaj <mhal@rbox.co> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Link: https://lore.kernel.org/r/20241118-vsock-bpf-poll-close-v1-3-f1b9669cacdc@rbox.co Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com>
2024-11-25bpf, vsock: Fix poll() missing a queueMichal Luczaj
When a verdict program simply passes a packet without redirection, sk_msg is enqueued on sk_psock::ingress_msg. Add a missing check to poll(). Fixes: 634f1a7110b4 ("vsock: support sockmap") Signed-off-by: Michal Luczaj <mhal@rbox.co> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Luigi Leonardi <leonardi@redhat.com> Link: https://lore.kernel.org/r/20241118-vsock-bpf-poll-close-v1-1-f1b9669cacdc@rbox.co Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: John Fastabend <john.fastabend@gmail.com>
2024-11-24netlink: fix false positive warning in extack during dumpsJakub Kicinski
Commit under fixes extended extack reporting to dumps. It works under normal conditions, because extack errors are usually reported during ->start() or the first ->dump(), it's quite rare that the dump starts okay but fails later. If the dump does fail later, however, the input skb will already have the initiating message pulled, so checking if bad attr falls within skb->data will fail. Switch the check to using nlh, which is always valid. syzbot found a way to hit that scenario by filling up the receive queue. In this case we initiate a dump but don't call ->dump() until there is read space for an skb. WARNING: CPU: 1 PID: 5845 at net/netlink/af_netlink.c:2210 netlink_ack_tlv_fill+0x1a8/0x560 net/netlink/af_netlink.c:2209 RIP: 0010:netlink_ack_tlv_fill+0x1a8/0x560 net/netlink/af_netlink.c:2209 Call Trace: <TASK> netlink_dump_done+0x513/0x970 net/netlink/af_netlink.c:2250 netlink_dump+0x91f/0xe10 net/netlink/af_netlink.c:2351 netlink_recvmsg+0x6bb/0x11d0 net/netlink/af_netlink.c:1983 sock_recvmsg_nosec net/socket.c:1051 [inline] sock_recvmsg+0x22f/0x280 net/socket.c:1073 __sys_recvfrom+0x246/0x3d0 net/socket.c:2267 __do_sys_recvfrom net/socket.c:2285 [inline] __se_sys_recvfrom net/socket.c:2281 [inline] __x64_sys_recvfrom+0xde/0x100 net/socket.c:2281 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7ff37dd17a79 Reported-by: syzbot+d4373fa8042c06cefa84@syzkaller.appspotmail.com Fixes: 8af4f60472fc ("netlink: support all extack types in dumps") Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Link: https://patch.msgid.link/20241119224432.1713040-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-24rtnetlink: fix rtnl_dump_ifinfo() error pathEric Dumazet
syzbot found that rtnl_dump_ifinfo() could return with a lock held [1] Move code around so that rtnl_link_ops_put() and put_net() can be called at the end of this function. [1] WARNING: lock held when returning to user space! 6.12.0-rc7-syzkaller-01681-g38f83a57aa8e #0 Not tainted syz-executor399/5841 is leaving the kernel with locks still held! 1 lock held by syz-executor399/5841: #0: ffffffff8f46c2a0 (&ops->srcu#2){.+.+}-{0:0}, at: rcu_lock_acquire include/linux/rcupdate.h:337 [inline] #0: ffffffff8f46c2a0 (&ops->srcu#2){.+.+}-{0:0}, at: rcu_read_lock include/linux/rcupdate.h:849 [inline] #0: ffffffff8f46c2a0 (&ops->srcu#2){.+.+}-{0:0}, at: rtnl_link_ops_get+0x22/0x250 net/core/rtnetlink.c:555 Fixes: 43c7ce69d28e ("rtnetlink: Protect struct rtnl_link_ops with SRCU.") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Reviewed-by: Joe Damato <jdamato@fastly.com> Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://patch.msgid.link/20241121194105.3632507-1-edumazet@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-22net/9p/usbg: allow building as standalone moduleDominique Martinet
There is no reason only the usbg transport would not be its own module, so make it tristate. In particular, this fixes a couple of issues the current bool had: - trans_usbg was apparently not compiled at all when NET_9P=m - the workaround added in commit 2193ede180dd ("net/9p/usbg: fix CONFIG_USB_GADGET dependency") became redundant because a tristate item cannot be built-in when its dependency is a module, so we can depend on USB_GADGET "normally" again. Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Link: https://lkml.kernel.org/r/ZzhWRPDNwu225NWz@codewreck.org Message-ID: <20241122144754.1231919-1-asmadeus@codewreck.org> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
2024-11-229p/xen: fix release of IRQAlex Zenla
Kernel logs indicate an IRQ was double-freed. Pass correct device ID during IRQ release. Fixes: 71ebd71921e45 ("xen/9pfs: connect to the backend") Signed-off-by: Alex Zenla <alex@edera.dev> Signed-off-by: Alexander Merritt <alexander@edera.dev> Signed-off-by: Ariadne Conill <ariadne@ariadne.space> Reviewed-by: Juergen Gross <jgross@suse.com> Message-ID: <20241121225100.5736-1-alexander@edera.dev> [Dominique: remove confusing variable reset to 0] Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
2024-11-21Merge tag 'net-next-6.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Paolo Abeni: "The most significant set of changes is the per netns RTNL. The new behavior is disabled by default, regression risk should be contained. Notably the new config knob PTP_1588_CLOCK_VMCLOCK will inherit its default value from PTP_1588_CLOCK_KVM, as the first is intended to be a more reliable replacement for the latter. Core: - Started a very large, in-progress, effort to make the RTNL lock scope per network-namespace, thus reducing the lock contention significantly in the containerized use-case, comprising: - RCU-ified some relevant slices of the FIB control path - introduce basic per netns locking helpers - namespacified the IPv4 address hash table - remove rtnl_register{,_module}() in favour of rtnl_register_many() - refactor rtnl_{new,del,set}link() moving as much validation as possible out of RTNL lock - convert all phonet doit() and dumpit() handlers to RCU - convert IPv4 addresses manipulation to per-netns RTNL - convert virtual interface creation to per-netns RTNL the per-netns lock infrastructure is guarded by the CONFIG_DEBUG_NET_SMALL_RTNL knob, disabled by default ad interim. - Introduce NAPI suspension, to efficiently switching between busy polling (NAPI processing suspended) and normal processing. - Migrate the IPv4 routing input, output and control path from direct ToS usage to DSCP macros. This is a work in progress to make ECN handling consistent and reliable. - Add drop reasons support to the IPv4 rotue input path, allowing better introspection in case of packets drop. - Make FIB seqnum lockless, dropping RTNL protection for read access. - Make inet{,v6} addresses hashing less predicable. - Allow providing timestamp OPT_ID via cmsg, to correlate TX packets and timestamps Things we sprinkled into general kernel code: - Add small file operations for debugfs, to reduce the struct ops size. - Refactoring and optimization for the implementation of page_frag API, This is a preparatory work to consolidate the page_frag implementation. Netfilter: - Optimize set element transactions to reduce memory consumption - Extended netlink error reporting for attribute parser failure. - Make legacy xtables configs user selectable, giving users the option to configure iptables without enabling any other config. - Address a lot of false-positive RCU issues, pointed by recent CI improvements. BPF: - Put xsk sockets on a struct diet and add various cleanups. Overall, this helps to bump performance by 12% for some workloads. - Extend BPF selftests to increase coverage of XDP features in combination with BPF cpumap. - Optimize and homogenize bpf_csum_diff helper for all archs and also add a batch of new BPF selftests for it. - Extend netkit with an option to delegate skb->{mark,priority} scrubbing to its BPF program. - Make the bpf_get_netns_cookie() helper available also to tc(x) BPF programs. Protocols: - Introduces 4-tuple hash for connected udp sockets, speeding-up significantly connected sockets lookup. - Add a fastpath for some TCP timers that usually expires after close, the socket lock contention. - Add inbound and outbound xfrm state caches to speed up state lookups. - Avoid sending MPTCP advertisements on stale subflows, reducing risks on loosing them. - Make neighbours table flushing more scalable, maintaining per device neigh lists. Driver API: - Introduce a unified interface to configure transmission H/W shaping, and expose it to user-space via generic-netlink. - Add support for per-NAPI config via netlink. This makes napi configuration persistent across queues removal and re-creation. Requires driver updates, currently supported drivers are: nVidia/Mellanox mlx4 and mlx5, Broadcom brcm and Intel ice. - Add ethtool support for writing SFP / PHY firmware blocks. - Track RSS context allocation from ethtool core. - Implement support for mirroring to DSA CPU port, via TC mirror offload. - Consolidate FDB updates notification, to avoid duplicates on device-specific entries. - Expose DPLL clock quality level to the user-space. - Support master-slave PHY config via device tree. Tests and tooling: - forwarding: introduce deferred commands, to simplify the cleanup phase Drivers: - Updated several drivers - Amazon vNic, Google vNic, Microsoft vNic, Intel e1000e and Broadcom Tigon3 - to use netdev-genl to link the IRQs and queues to NAPI IDs, allowing busy polling and better introspection. - Ethernet high-speed NICs: - nVidia/Mellanox: - mlx5: - a large refactor to implement support for cross E-Switch scheduling - refactor H/W conter management to let it scale better - H/W GRO cleanups - Intel (100G, ice):: - add support for ethtool reset - implement support for per TX queue H/W shaping - AMD/Solarflare: - implement per device queue stats support - Broadcom (bnxt): - improve wildcard l4proto on IPv4/IPv6 ntuple rules - Marvell Octeon: - Add representor support for each Resource Virtualization Unit (RVU) device. - Hisilicon: - add support for the BMC Gigabit Ethernet - IBM (EMAC): - driver cleanup and modernization - Cisco (VIC): - raise the queues number limit to 256 - Ethernet virtual: - Google vNIC: - implement page pool support - macsec: - inherit lower device's features and TSO limits when offloading - virtio_net: - enable premapped mode by default - support for XDP socket(AF_XDP) zerocopy TX - wireguard: - set the TSO max size to be GSO_MAX_SIZE, to aggregate larger packets. - Ethernet NICs embedded and virtual: - Broadcom ASP: - enable software timestamping - Freescale: - add enetc4 PF driver - MediaTek: Airoha SoC: - implement BQL support - RealTek r8169: - enable TSO by default on r8168/r8125 - implement extended ethtool stats - Renesas AVB: - enable TX checksum offload - Synopsys (stmmac): - support header splitting for vlan tagged packets - move common code for DWMAC4 and DWXGMAC into a separate FPE module. - add dwmac driver support for T-HEAD TH1520 SoC - Synopsys (xpcs): - driver refactor and cleanup - TI: - icssg_prueth: add VLAN offload support - Xilinx emaclite: - add clock support - Ethernet switches: - Microchip: - implement support for the lan969x Ethernet switch family - add LAN9646 switch support to KSZ DSA driver - Ethernet PHYs: - Marvel: 88q2x: enable auto negotiation - Microchip: add support for LAN865X Rev B1 and LAN867X Rev C1/C2 - PTP: - Add support for the Amazon virtual clock device - Add PtP driver for s390 clocks - WiFi: - mac80211 - EHT 1024 aggregation size for transmissions - new operation to indicate that a new interface is to be added - support radio separation of multi-band devices - move wireless extension spy implementation to libiw - Broadcom: - brcmfmac: optional LPO clock support - Microchip: - add support for Atmel WILC3000 - Qualcomm (ath12k): - firmware coredump collection support - add debugfs support for a multitude of statistics - Qualcomm (ath5k): - Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support - Realtek: - rtw88: 8821au and 8812au USB adapters support - rtw89: add thermal protection - rtw89: fine tune BT-coexsitence to improve user experience - rtw89: firmware secure boot for WiFi 6 chip - Bluetooth - add Qualcomm WCN785x support for ids Foxconn 0xe0fc/0xe0f3 and 0x13d3:0x3623 - add Realtek RTL8852BE support for id Foxconn 0xe123 - add MediaTek MT7920 support for wireless module ids - btintel_pcie: add handshake between driver and firmware - btintel_pcie: add recovery mechanism - btnxpuart: add GPIO support to power save feature" * tag 'net-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1475 commits) mm: page_frag: fix a compile error when kernel is not compiled Documentation: tipc: fix formatting issue in tipc.rst selftests: nic_performance: Add selftest for performance of NIC driver selftests: nic_link_layer: Add selftest case for speed and duplex states selftests: nic_link_layer: Add link layer selftest for NIC driver bnxt_en: Add FW trace coredump segments to the coredump bnxt_en: Add a new ethtool -W dump flag bnxt_en: Add 2 parameters to bnxt_fill_coredump_seg_hdr() bnxt_en: Add functions to copy host context memory bnxt_en: Do not free FW log context memory bnxt_en: Manage the FW trace context memory bnxt_en: Allocate backing store memory for FW trace logs bnxt_en: Add a 'force' parameter to bnxt_free_ctx_mem() bnxt_en: Refactor bnxt_free_ctx_mem() bnxt_en: Add mem_valid bit to struct bnxt_ctx_mem_type bnxt_en: Update firmware interface spec to 1.10.3.85 selftests/bpf: Add some tests with sockmap SK_PASS bpf: fix recursive lock when verdict program return SK_PASS wireguard: device: support big tcp GSO wireguard: selftests: load nf_conntrack if not present ...
2024-11-21Merge tag 'bpf-next-6.13' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next Pull bpf updates from Alexei Starovoitov: - Add BPF uprobe session support (Jiri Olsa) - Optimize uprobe performance (Andrii Nakryiko) - Add bpf_fastcall support to helpers and kfuncs (Eduard Zingerman) - Avoid calling free_htab_elem() under hash map bucket lock (Hou Tao) - Prevent tailcall infinite loop caused by freplace (Leon Hwang) - Mark raw_tracepoint arguments as nullable (Kumar Kartikeya Dwivedi) - Introduce uptr support in the task local storage map (Martin KaFai Lau) - Stringify errno log messages in libbpf (Mykyta Yatsenko) - Add kmem_cache BPF iterator for perf's lock profiling (Namhyung Kim) - Support BPF objects of either endianness in libbpf (Tony Ambardar) - Add ksym to struct_ops trampoline to fix stack trace (Xu Kuohai) - Introduce private stack for eligible BPF programs (Yonghong Song) - Migrate samples/bpf tests to selftests/bpf test_progs (Daniel T. Lee) - Migrate test_sock to selftests/bpf test_progs (Jordan Rife) * tag 'bpf-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (152 commits) libbpf: Change hash_combine parameters from long to unsigned long selftests/bpf: Fix build error with llvm 19 libbpf: Fix memory leak in bpf_program__attach_uprobe_multi bpf: use common instruction history across all states bpf: Add necessary migrate_disable to range_tree. bpf: Do not alloc arena on unsupported arches selftests/bpf: Set test path for token/obj_priv_implicit_token_envvar selftests/bpf: Add a test for arena range tree algorithm bpf: Introduce range_tree data structure and use it in bpf arena samples/bpf: Remove unused variable in xdp2skb_meta_kern.c samples/bpf: Remove unused variables in tc_l2_redirect_kern.c bpftool: Cast variable `var` to long long bpf, x86: Propagate tailcall info only for subprogs bpf: Add kernel symbol for struct_ops trampoline bpf: Use function pointers count as struct_ops links count bpf: Remove unused member rcu from bpf_struct_ops_map selftests/bpf: Add struct_ops prog private stack tests bpf: Support private stack for struct_ops progs selftests/bpf: Add tracing prog private stack tests bpf, x86: Support private stack in jit ...
2024-11-219p/xen: fix init sequenceAlex Zenla
Large amount of mount hangs observed during hotplugging of 9pfs devices. The 9pfs Xen driver attempts to initialize itself more than once, causing the frontend and backend to disagree: the backend listens on a channel that the frontend does not send on, resulting in stalled processing. Only allow initialization of 9p frontend once. Fixes: c15fe55d14b3b ("9p/xen: fix connection sequence") Signed-off-by: Alex Zenla <alex@edera.dev> Signed-off-by: Alexander Merritt <alexander@edera.dev> Signed-off-by: Ariadne Conill <ariadne@ariadne.space> Reviewed-by: Juergen Gross <jgross@suse.com> Message-ID: <20241119211633.38321-1-alexander@edera.dev> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
2024-11-19Merge tag 'timers-core-2024-11-18' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "A rather large update for timekeeping and timers: - The final step to get rid of auto-rearming posix-timers posix-timers are currently auto-rearmed by the kernel when the signal of the timer is ignored so that the timer signal can be delivered once the corresponding signal is unignored. This requires to throttle the timer to prevent a DoS by small intervals and keeps the system pointlessly out of low power states for no value. This is a long standing non-trivial problem due to the lock order of posix-timer lock and the sighand lock along with life time issues as the timer and the sigqueue have different life time rules. Cure this by: - Embedding the sigqueue into the timer struct to have the same life time rules. Aside of that this also avoids the lookup of the timer in the signal delivery and rearm path as it's just a always valid container_of() now. - Queuing ignored timer signals onto a seperate ignored list. - Moving queued timer signals onto the ignored list when the signal is switched to SIG_IGN before it could be delivered. - Walking the ignored list when SIG_IGN is lifted and requeue the signals to the actual signal lists. This allows the signal delivery code to rearm the timer. This also required to consolidate the signal delivery rules so they are consistent across all situations. With that all self test scenarios finally succeed. - Core infrastructure for VFS multigrain timestamping This is required to allow the kernel to use coarse grained time stamps by default and switch to fine grained time stamps when inode attributes are actively observed via getattr(). These changes have been provided to the VFS tree as well, so that the VFS specific infrastructure could be built on top. - Cleanup and consolidation of the sleep() infrastructure - Move all sleep and timeout functions into one file - Rework udelay() and ndelay() into proper documented inline functions and replace the hardcoded magic numbers by proper defines. - Rework the fsleep() implementation to take the reality of the timer wheel granularity on different HZ values into account. Right now the boundaries are hard coded time ranges which fail to provide the requested accuracy on different HZ settings. - Update documentation for all sleep/timeout related functions and fix up stale documentation links all over the place - Fixup a few usage sites - Rework of timekeeping and adjtimex(2) to prepare for multiple PTP clocks A system can have multiple PTP clocks which are participating in seperate and independent PTP clock domains. So far the kernel only considers the PTP clock which is based on CLOCK TAI relevant as that's the clock which drives the timekeeping adjustments via the various user space daemons through adjtimex(2). The non TAI based clock domains are accessible via the file descriptor based posix clocks, but their usability is very limited. They can't be accessed fast as they always go all the way out to the hardware and they cannot be utilized in the kernel itself. As Time Sensitive Networking (TSN) gains traction it is required to provide fast user and kernel space access to these clocks. The approach taken is to utilize the timekeeping and adjtimex(2) infrastructure to provide this access in a similar way how the kernel provides access to clock MONOTONIC, REALTIME etc. Instead of creating a duplicated infrastructure this rework converts timekeeping and adjtimex(2) into generic functionality which operates on pointers to data structures instead of using static variables. This allows to provide time accessors and adjtimex(2) functionality for the independent PTP clocks in a subsequent step. - Consolidate hrtimer initialization hrtimers are set up by initializing the data structure and then seperately setting the callback function for historical reasons. That's an extra unnecessary step and makes Rust support less straight forward than it should be. Provide a new set of hrtimer_setup*() functions and convert the core code and a few usage sites of the less frequently used interfaces over. The bulk of the htimer_init() to hrtimer_setup() conversion is already prepared and scheduled for the next merge window. - Drivers: - Ensure that the global timekeeping clocksource is utilizing the cluster 0 timer on MIPS multi-cluster systems. Otherwise CPUs on different clusters use their cluster specific clocksource which is not guaranteed to be synchronized with other clusters. - Mostly boring cleanups, fixes, improvements and code movement" * tag 'timers-core-2024-11-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (140 commits) posix-timers: Fix spurious warning on double enqueue versus do_exit() clocksource/drivers/arm_arch_timer: Use of_property_present() for non-boolean properties clocksource/drivers/gpx: Remove redundant casts clocksource/drivers/timer-ti-dm: Fix child node refcount handling dt-bindings: timer: actions,owl-timer: convert to YAML clocksource/drivers/ralink: Add Ralink System Tick Counter driver clocksource/drivers/mips-gic-timer: Always use cluster 0 counter as clocksource clocksource/drivers/timer-ti-dm: Don't fail probe if int not found clocksource/drivers:sp804: Make user selectable clocksource/drivers/dw_apb: Remove unused dw_apb_clockevent functions hrtimers: Delete hrtimer_init_on_stack() alarmtimer: Switch to use hrtimer_setup() and hrtimer_setup_on_stack() io_uring: Switch to use hrtimer_setup_on_stack() sched/idle: Switch to use hrtimer_setup_on_stack() hrtimers: Delete hrtimer_init_sleeper_on_stack() wait: Switch to use hrtimer_setup_sleeper_on_stack() timers: Switch to use hrtimer_setup_sleeper_on_stack() net: pktgen: Switch to use hrtimer_setup_sleeper_on_stack() futex: Switch to use hrtimer_setup_sleeper_on_stack() fs/aio: Switch to use hrtimer_setup_sleeper_on_stack() ...
2024-11-19Merge tag 'random-6.13-rc1-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull random number generator updates from Jason Donenfeld: "This contains a single series from Uros to replace uses of <linux/random.h> with prandom.h or other more specific headers as needed, in order to avoid a circular header issue. Uros' goal is to be able to use percpu.h from prandom.h, which will then allow him to define __percpu in percpu.h rather than in compiler_types.h" * tag 'random-6.13-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: Include <linux/percpu.h> in <linux/prandom.h> random: Do not include <linux/prandom.h> in <linux/random.h> netem: Include <linux/prandom.h> in sch_netem.c lib/test_scanf: Include <linux/prandom.h> instead of <linux/random.h> lib/test_parman: Include <linux/prandom.h> instead of <linux/random.h> bpf/tests: Include <linux/prandom.h> instead of <linux/random.h> lib/rbtree-test: Include <linux/prandom.h> instead of <linux/random.h> random32: Include <linux/prandom.h> instead of <linux/random.h> kunit: string-stream-test: Include <linux/prandom.h> lib/interval_tree_test.c: Include <linux/prandom.h> instead of <linux/random.h> bpf: Include <linux/prandom.h> instead of <linux/random.h> scsi: libfcoe: Include <linux/prandom.h> instead of <linux/random.h> fscrypt: Include <linux/once.h> in fs/crypto/keyring.c mtd: tests: Include <linux/prandom.h> instead of <linux/random.h> media: vivid: Include <linux/prandom.h> in vivid-vid-cap.c drm/lib: Include <linux/prandom.h> instead of <linux/random.h> drm/i915/selftests: Include <linux/prandom.h> instead of <linux/random.h> crypto: testmgr: Include <linux/prandom.h> instead of <linux/random.h> x86/kaslr: Include <linux/prandom.h> instead of <linux/random.h>
2024-11-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Merge in late fixes to prepare for the 6.13 net-next PR. Conflicts: include/linux/phy.h 41ffcd95015f net: phy: fix phylib's dual eee_enabled 721aa69e708b net: phy: convert eee_broken_modes to a linkmode bitmap https://lore.kernel.org/all/20241118135512.1039208b@canb.auug.org.au/ drivers/net/ethernet/wangxun/txgbe/txgbe_phy.c 2160428bcb20 net: txgbe: fix null pointer to pcs 2160428bcb20 net: txgbe: remove GPIO interrupt controller Adjacent commits: include/linux/phy.h 41ffcd95015f net: phy: fix phylib's dual eee_enabled 516a5f11eb97 net: phy: respect cached advertising when re-enabling EEE Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-11-18bpf: fix recursive lock when verdict program return SK_PASSJiayuan Chen
When the stream_verdict program returns SK_PASS, it places the received skb into its own receive queue, but a recursive lock eventually occurs, leading to an operating system deadlock. This issue has been present since v6.9. ''' sk_psock_strp_data_ready write_lock_bh(&sk->sk_callback_lock) strp_data_ready strp_read_sock read_sock -> tcp_read_sock strp_recv cb.rcv_msg -> sk_psock_strp_read # now stream_verdict return SK_PASS without peer sock assign __SK_PASS = sk_psock_map_verd(SK_PASS, NULL) sk_psock_verdict_apply sk_psock_skb_ingress_self sk_psock_skb_ingress_enqueue sk_psock_data_ready read_lock_bh(&sk->sk_callback_lock) <= dead lock ''' This topic has been discussed before, but it has not been fixed. Previous discussion: https://lore.kernel.org/all/6684a5864ec86_403d20898@john.notmuch Fixes: 6648e613226e ("bpf, skmsg: Fix NULL pointer dereference in sk_psock_skb_ingress_enqueue") Reported-by: Vincent Whitchurch <vincent.whitchurch@datadoghq.com> Signed-off-by: Jiayuan Chen <mrpre@163.com> Signed-off-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://patch.msgid.link/20241118030910.36230-2-mrpre@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18netpoll: Use rcu_access_pointer() in __netpoll_setupBreno Leitao
The ndev->npinfo pointer in __netpoll_setup() is RCU-protected but is being accessed directly for a NULL check. While no RCU read lock is held in this context, we should still use proper RCU primitives for consistency and correctness. Replace the direct NULL check with rcu_access_pointer(), which is the appropriate primitive when only checking for NULL without dereferencing the pointer. This function provides the necessary ordering guarantees without requiring RCU read-side protection. Reviewed-by: Michal Kubiak <michal.kubiak@intel.com> Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20241118-netpoll_rcu-v1-1-a1888dcb4a02@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18net: ip: fix unexpected return in fib_validate_source()Menglong Dong
The errno should be replaced with drop reasons in fib_validate_source(), and the "-EINVAL" shouldn't be returned. And this causes a warning, which is reported by syzkaller: netlink: 'syz-executor371': attribute type 4 has an invalid length. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 5842 at net/core/skbuff.c:1219 __sk_skb_reason_drop net/core/skbuff.c:1216 [inline] WARNING: CPU: 0 PID: 5842 at net/core/skbuff.c:1219 sk_skb_reason_drop+0x87/0x380 net/core/skbuff.c:1241 Modules linked in: CPU: 0 UID: 0 PID: 5842 Comm: syz-executor371 Not tainted 6.12.0-rc6-syzkaller-01362-ga58f00ed24b8 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/30/2024 RIP: 0010:__sk_skb_reason_drop net/core/skbuff.c:1216 [inline] RIP: 0010:sk_skb_reason_drop+0x87/0x380 net/core/skbuff.c:1241 Code: 00 00 00 fc ff df 41 8d 9e 00 00 fc ff bf 01 00 fc ff 89 de e8 ea 9f 08 f8 81 fb 00 00 fc ff 77 3a 4c 89 e5 e8 9a 9b 08 f8 90 <0f> 0b 90 eb 5e bf 01 00 00 00 89 ee e8 c8 9f 08 f8 85 ed 0f 8e 49 RSP: 0018:ffffc90003d57078 EFLAGS: 00010293 RAX: ffffffff898c3ec6 RBX: 00000000fffbffea RCX: ffff8880347a5a00 RDX: 0000000000000000 RSI: 00000000fffbffea RDI: 00000000fffc0001 RBP: dffffc0000000000 R08: ffffffff898c3eb6 R09: 1ffff110023eb7d4 R10: dffffc0000000000 R11: ffffed10023eb7d5 R12: dffffc0000000000 R13: ffff888011f5bdc0 R14: 00000000ffffffea R15: 0000000000000000 FS: 000055557d41e380(0000) GS:ffff8880b8600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000056519d31d608 CR3: 000000007854e000 CR4: 00000000003526f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> kfree_skb_reason include/linux/skbuff.h:1263 [inline] ip_rcv_finish_core+0xfde/0x1b50 net/ipv4/ip_input.c:424 ip_list_rcv_finish net/ipv4/ip_input.c:610 [inline] ip_sublist_rcv+0x3b1/0xab0 net/ipv4/ip_input.c:636 ip_list_rcv+0x42b/0x480 net/ipv4/ip_input.c:670 __netif_receive_skb_list_ptype net/core/dev.c:5715 [inline] __netif_receive_skb_list_core+0x94e/0x980 net/core/dev.c:5762 __netif_receive_skb_list net/core/dev.c:5814 [inline] netif_receive_skb_list_internal+0xa51/0xe30 net/core/dev.c:5905 netif_receive_skb_list+0x55/0x4b0 net/core/dev.c:5957 xdp_recv_frames net/bpf/test_run.c:280 [inline] xdp_test_run_batch net/bpf/test_run.c:361 [inline] bpf_test_run_xdp_live+0x1b5e/0x21b0 net/bpf/test_run.c:390 bpf_prog_test_run_xdp+0x805/0x11e0 net/bpf/test_run.c:1318 bpf_prog_test_run+0x2e4/0x360 kernel/bpf/syscall.c:4266 __sys_bpf+0x48d/0x810 kernel/bpf/syscall.c:5671 __do_sys_bpf kernel/bpf/syscall.c:5760 [inline] __se_sys_bpf kernel/bpf/syscall.c:5758 [inline] __x64_sys_bpf+0x7c/0x90 kernel/bpf/syscall.c:5758 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f18af25a8e9 Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffee4090af8 EFLAGS: 00000246 ORIG_RAX: 0000000000000141 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f18af25a8e9 RDX: 0000000000000048 RSI: 0000000020000600 RDI: 000000000000000a RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Fix it by returning "-SKB_DROP_REASON_IP_LOCAL_SOURCE" instead of "-EINVAL" in fib_validate_source(). Reported-by: syzbot+52fbd90f020788ec7709@syzkaller.appspotmail.com Closes: https://lore.kernel.org/netdev/6738e539.050a0220.e1c64.0002.GAE@google.com/ Fixes: 82d9983ebeb8 ("net: ip: make ip_route_input_noref() return drop reasons") Signed-off-by: Menglong Dong <dongml2@chinatelecom.cn> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18Revert "net: ethtool: Avoid thousands of -Wflex-array-member-not-at-end ↵Kees Cook
warnings" This reverts commit 3bd9b9abdf1563a22041b7255baea6d449902f1a. We cannot use the new tagged struct group because it throws C++ errors even under "extern C". Signed-off-by: Kees Cook <kees@kernel.org> Link: https://patch.msgid.link/20241115204308.3821419-1-kees@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18mptcp: pm: avoid code duplication to lookup endpGeliang Tang
The helper __lookup_addr() can be used in mptcp_pm_nl_get_local_id() and mptcp_pm_nl_is_backup() to simplify the code, and avoid code duplication. Co-developed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241115-net-next-mptcp-pm-lockless-dump-v1-2-f4a1bcb4ca2c@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18mptcp: pm: lockless list traversal to dump endpMatthieu Baerts (NGI0)
To return an endpoint to the userspace via Netlink, and to dump all of them, the endpoint list was iterated while holding the pernet->lock, but only to read the content of the list. In these cases, the spin locks can be replaced by RCU read ones, and use the _rcu variants to iterate over the entries list in a lockless way. Note that the __lookup_addr_by_id() helper has been modified to use the _rcu variants of list_for_each_entry(), but with an extra conditions, so it can be called either while the RCU read lock is held, or when the associated pernet->lock is held. Reviewed-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20241115-net-next-mptcp-pm-lockless-dump-v1-1-f4a1bcb4ca2c@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18net/neighbor: clear error in case strict check is not setJakub Kicinski
Commit 51183d233b5a ("net/neighbor: Update neigh_dump_info for strict data checking") added strict checking. The err variable is not cleared, so if we find no table to dump we will return the validation error even if user did not want strict checking. I think the only way to hit this is to send an buggy request, and ask for a table which doesn't exist, so there's no point treating this as a real fix. I only noticed it because a syzbot repro depended on it to trigger another bug. Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20241115003221.733593-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-18Merge tag 'lsm-pr-20241112' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm Pull lsm updates from Paul Moore: "Thirteen patches, all focused on moving away from the current 'secid' LSM identifier to a richer 'lsm_prop' structure. This move will help reduce the translation that is necessary in many LSMs, offering better performance, and make it easier to support different LSMs in the future" * tag 'lsm-pr-20241112' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm: lsm: remove lsm_prop scaffolding netlabel,smack: use lsm_prop for audit data audit: change context data from secid to lsm_prop lsm: create new security_cred_getlsmprop LSM hook audit: use an lsm_prop in audit_names lsm: use lsm_prop in security_inode_getsecid lsm: use lsm_prop in security_current_getsecid audit: update shutdown LSM data lsm: use lsm_prop in security_ipc_getsecid audit: maintain an lsm_prop in audit_context lsm: add lsmprop_to_secctx hook lsm: use lsm_prop in security_audit_rule_match lsm: add the lsm_prop data structure
2024-11-18svcrdma: fix miss destroy percpu_counter in svc_rdma_proc_init()Ye Bin
There's issue as follows: RPC: Registered rdma transport module. RPC: Registered rdma backchannel transport module. RPC: Unregistered rdma transport module. RPC: Unregistered rdma backchannel transport module. BUG: unable to handle page fault for address: fffffbfff80c609a PGD 123fee067 P4D 123fee067 PUD 123fea067 PMD 10c624067 PTE 0 Oops: Oops: 0000 [#1] PREEMPT SMP KASAN NOPTI RIP: 0010:percpu_counter_destroy_many+0xf7/0x2a0 Call Trace: <TASK> __die+0x1f/0x70 page_fault_oops+0x2cd/0x860 spurious_kernel_fault+0x36/0x450 do_kern_addr_fault+0xca/0x100 exc_page_fault+0x128/0x150 asm_exc_page_fault+0x26/0x30 percpu_counter_destroy_many+0xf7/0x2a0 mmdrop+0x209/0x350 finish_task_switch.isra.0+0x481/0x840 schedule_tail+0xe/0xd0 ret_from_fork+0x23/0x80 ret_from_fork_asm+0x1a/0x30 </TASK> If register_sysctl() return NULL, then svc_rdma_proc_cleanup() will not destroy the percpu counters which init in svc_rdma_proc_init(). If CONFIG_HOTPLUG_CPU is enabled, residual nodes may be in the 'percpu_counters' list. The above issue may occur once the module is removed. If the CONFIG_HOTPLUG_CPU configuration is not enabled, memory leakage occurs. To solve above issue just destroy all percpu counters when register_sysctl() return NULL. Fixes: 1e7e55731628 ("svcrdma: Restore read and write stats") Fixes: 22df5a22462e ("svcrdma: Convert rdma_stat_sq_starve to a per-CPU counter") Fixes: df971cd853c0 ("svcrdma: Convert rdma_stat_recv to a per-CPU counter") Signed-off-by: Ye Bin <yebin10@huawei.com> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2024-11-18SUNRPC: make sure cache entry active before cache_showYang Erkun
The function `c_show` was called with protection from RCU. This only ensures that `cp` will not be freed. Therefore, the reference count for `cp` can drop to zero, which will trigger a refcount use-after-free warning when `cache_get` is called. To resolve this issue, use `cache_get_rcu` to ensure that `cp` remains active. ------------[ cut here ]------------ refcount_t: addition on 0; use-after-free. WARNING: CPU: 7 PID: 822 at lib/refcount.c:25 refcount_warn_saturate+0xb1/0x120 CPU: 7 UID: 0 PID: 822 Comm: cat Not tainted 6.12.0-rc3+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.1-2.fc37 04/01/2014 RIP: 0010:refcount_warn_saturate+0xb1/0x120 Call Trace: <TASK> c_show+0x2fc/0x380 [sunrpc] seq_read_iter+0x589/0x770 seq_read+0x1e5/0x270 proc_reg_read+0xe1/0x140 vfs_read+0x125/0x530 ksys_read+0xc1/0x160 do_syscall_64+0x5f/0x170 entry_SYSCALL_64_after_hwframe+0x76/0x7e Cc: stable@vger.kernel.org # v4.20+ Signed-off-by: Yang Erkun <yangerkun@huawei.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
2024-11-18Merge tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds
Pull 'struct fd' class updates from Al Viro: "The bulk of struct fd memory safety stuff Making sure that struct fd instances are destroyed in the same scope where they'd been created, getting rid of reassignments and passing them by reference, converting to CLASS(fd{,_pos,_raw}). We are getting very close to having the memory safety of that stuff trivial to verify" * tag 'pull-fd' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (28 commits) deal with the last remaing boolean uses of fd_file() css_set_fork(): switch to CLASS(fd_raw, ...) memcg_write_event_control(): switch to CLASS(fd) assorted variants of irqfd setup: convert to CLASS(fd) do_pollfd(): convert to CLASS(fd) convert do_select() convert vfs_dedupe_file_range(). convert cifs_ioctl_copychunk() convert media_request_get_by_fd() convert spu_run(2) switch spufs_calls_{get,put}() to CLASS() use convert cachestat(2) convert do_preadv()/do_pwritev() fdget(), more trivial conversions fdget(), trivial conversions privcmd_ioeventfd_assign(): don't open-code eventfd_ctx_fdget() o2hb_region_dev_store(): avoid goto around fdget()/fdput() introduce "fd_pos" class, convert fdget_pos() users to it. fdget_raw() users: switch to CLASS(fd_raw) convert vmsplice() to CLASS(fd) ...
2024-11-18Merge tag 'vfs-6.13.file' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs Pull vfs file updates from Christian Brauner: "This contains changes the changes for files for this cycle: - Introduce a new reference counting mechanism for files. As atomic_inc_not_zero() is implemented with a try_cmpxchg() loop it has O(N^2) behaviour under contention with N concurrent operations and it is in a hot path in __fget_files_rcu(). The rcuref infrastructures remedies this problem by using an unconditional increment relying on safe- and dead zones to make this work and requiring rcu protection for the data structure in question. This not just scales better it also introduces overflow protection. However, in contrast to generic rcuref, files require a memory barrier and thus cannot rely on *_relaxed() atomic operations and also require to be built on atomic_long_t as having massive amounts of reference isn't unheard of even if it is just an attack. This adds a file specific variant instead of making this a generic library. This has been tested by various people and it gives consistent improvement up to 3-5% on workloads with loads of threads. - Add a fastpath for find_next_zero_bit(). Skip 2-levels searching via find_next_zero_bit() when there is a free slot in the word that contains the next fd. This improves pts/blogbench-1.1.0 read by 8% and write by 4% on Intel ICX 160. - Conditionally clear full_fds_bits since it's very likely that a bit in full_fds_bits has been cleared during __clear_open_fds(). This improves pts/blogbench-1.1.0 read up to 13%, and write up to 5% on Intel ICX 160. - Get rid of all lookup_*_fdget_rcu() variants. They were used to lookup files without taking a reference count. That became invalid once files were switched to SLAB_TYPESAFE_BY_RCU and now we're always taking a reference count. Switch to an already existing helper and remove the legacy variants. - Remove pointless includes of <linux/fdtable.h>. - Avoid cmpxchg() in close_files() as nobody else has a reference to the files_struct at that point. - Move close_range() into fs/file.c and fold __close_range() into it. - Cleanup calling conventions of alloc_fdtable() and expand_files(). - Merge __{set,clear}_close_on_exec() into one. - Make __set_open_fd() set cloexec as well instead of doing it in two separate steps" * tag 'vfs-6.13.file' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: selftests: add file SLAB_TYPESAFE_BY_RCU recycling stressor fs: port files to file_ref fs: add file_ref expand_files(): simplify calling conventions make __set_open_fd() set cloexec state as well fs: protect backing files with rcu file.c: merge __{set,clear}_close_on_exec() alloc_fdtable(): change calling conventions. fs/file.c: add fast path in find_next_fd() fs/file.c: conditionally clear full_fds fs/file.c: remove sanity_check and add likely/unlikely in alloc_fd() move close_range(2) into fs/file.c, fold __close_range() into it close_files(): don't bother with xchg() remove pointless includes of <linux/fdtable.h> get rid of ...lookup...fdget_rcu() family
2024-11-18libceph: Remove unused ceph_crypto_key_encodeDr. David Alan Gilbert
ceph_crypto_key_encode() was added in 2010's commit 8b6e4f2d8b21 ("ceph: aes crypto and base64 encode/decode helpers") but has remained unused (the decode is used). Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2024-11-18libceph: Remove unused ceph_osdc_watch_checkDr. David Alan Gilbert
ceph_osdc_watch_check() has been unused since it was added in commit b07d3c4bd727 ("libceph: support for checking on status of watch") Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2024-11-18libceph: Remove unused pagevec functionsDr. David Alan Gilbert
ceph_copy_user_to_page_vector() has been unused since 2013's commit e8344e668915 ("ceph: Implement writev/pwritev for sync operation.") ceph_copy_to_page_vector() has been unused since 2012's commit 913d2fdcf605 ("rbd: always pass ops array to rbd_req_sync_op()") Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2024-11-18libceph: Remove unused ceph_pagelist functionsDr. David Alan Gilbert
ceph_pagelist_truncate() and ceph_pagelist_set_cursor() have been unused since commit 39be95e9c8c0 ("ceph: ceph_pagelist_append might sleep while atomic") Remove them. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Reviewed-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
2024-11-18ipv6/udp: Add 4-tuple hash for connected socketPhilo Lu
Implement ipv6 udp hash4 like that in ipv4. The major difference is that the hash value should be calculated with udp6_ehashfn(). Besides, ipv4-mapped ipv6 address is handled before hash() and rehash(). Export udp_ehashfn because now we use it in udpv6 rehash. Core procedures of hash/unhash/rehash are same as ipv4, and udpv4 and udpv6 share the same udptable, so some functions in ipv4 hash4 can also be shared. Co-developed-by: Cambda Zhu <cambda@linux.alibaba.com> Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com> Co-developed-by: Fred Chen <fred.cc@alibaba-inc.com> Signed-off-by: Fred Chen <fred.cc@alibaba-inc.com> Co-developed-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com> Signed-off-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com> Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-18ipv4/udp: Add 4-tuple hash for connected socketPhilo Lu
Currently, the udp_table has two hash table, the port hash and portaddr hash. Usually for UDP servers, all sockets have the same local port and addr, so they are all on the same hash slot within a reuseport group. In some applications, UDP servers use connect() to manage clients. In particular, when firstly receiving from an unseen 4 tuple, a new socket is created and connect()ed to the remote addr:port, and then the fd is used exclusively by the client. Once there are connected sks in a reuseport group, udp has to score all sks in the same hash2 slot to find the best match. This could be inefficient with a large number of connections, resulting in high softirq overhead. To solve the problem, this patch implement 4-tuple hash for connected udp sockets. During connect(), hash4 slot is updated, as well as a corresponding counter, hash4_cnt, in hslot2. In __udp4_lib_lookup(), hslot4 will be searched firstly if the counter is non-zero. Otherwise, hslot2 is used like before. Note that only connected sockets enter this hash4 path, while un-connected ones are not affected. hlist_nulls is used for hash4, because we probably move to another hslot wrongly when lookup with concurrent rehash. Then we check nulls at the list end to see if we should restart lookup. Because udp does not use SLAB_TYPESAFE_BY_RCU, we don't need to touch sk_refcnt when lookup. Stress test results (with 1 cpu fully used) are shown below, in pps: (1) _un-connected_ socket as server [a] w/o hash4: 1,825176 [b] w/ hash4: 1,831750 (+0.36%) (2) 500 _connected_ sockets as server [c] w/o hash4: 290860 (only 16% of [a]) [d] w/ hash4: 1,889658 (+3.1% compared with [b]) With hash4, compute_score is skipped when lookup, so [d] is slightly better than [b]. Co-developed-by: Cambda Zhu <cambda@linux.alibaba.com> Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com> Co-developed-by: Fred Chen <fred.cc@alibaba-inc.com> Signed-off-by: Fred Chen <fred.cc@alibaba-inc.com> Co-developed-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com> Signed-off-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com> Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-18net/udp: Add 4-tuple hash list basisPhilo Lu
Add a new hash list, hash4, in udp table. It will be used to implement 4-tuple hash for connected udp sockets. This patch adds the hlist to table, and implements helpers and the initialization. 4-tuple hash is implemented in the following patch. hash4 uses hlist_nulls to avoid moving wrongly onto another hlist due to concurrent rehash, because rehash() can happen with lookup(). Co-developed-by: Cambda Zhu <cambda@linux.alibaba.com> Signed-off-by: Cambda Zhu <cambda@linux.alibaba.com> Co-developed-by: Fred Chen <fred.cc@alibaba-inc.com> Signed-off-by: Fred Chen <fred.cc@alibaba-inc.com> Co-developed-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com> Signed-off-by: Yubing Qiu <yubing.qiuyubing@alibaba-inc.com> Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-18net/udp: Add a new struct for hash2 slotPhilo Lu
Preparing for udp 4-tuple hash (uhash4 for short). To implement uhash4 without cache line missing when lookup, hslot2 is used to record the number of hashed sockets in hslot4. Thus adding a new struct udp_hslot_main with field hash4_cnt, which is used by hash2. The new struct is used to avoid doubling the size of udp_hslot. Before uhash4 lookup, firstly checking hash4_cnt to see if there are hashed sks in hslot4. Because hslot2 is always used in lookup, there is no cache line miss. Related helpers are updated, and use the helpers as possible. uhash4 is implemented in following patches. Signed-off-by: Philo Lu <lulie@linux.alibaba.com> Acked-by: Willem de Bruijn <willemb@google.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-18Merge tag 'ipsec-next-2024-11-15' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== ipsec-next-11-15 1) Add support for RFC 9611 per cpu xfrm state handling. 2) Add inbound and outbound xfrm state caches to speed up state lookups. 3) Convert xfrm to dscp_t. From Guillaume Nault. 4) Fix error handling in build_aevent. From Everest K.C. 5) Replace strncpy with strscpy_pad in copy_to_user_auth. From Daniel Yang. 6) Fix an uninitialized symbol during acquire state insertion. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2024-11-16net/9p/usbg: fix handling of the failed kzalloc() memory allocationMirsad Todorovac
On the linux-next, next-20241108 vanilla kernel, the coccinelle tool gave the following error report: ./net/9p/trans_usbg.c:912:5-11: ERROR: allocation function on line 911 returns NULL not ERR_PTR on failure kzalloc() failure is fixed to handle the NULL return case on the memory exhaustion. Fixes: a3be076dc174d ("net/9p/usbg: Add new usb gadget function transport") Cc: Michael Grzeschik <m.grzeschik@pengutronix.de> Cc: Eric Van Hensbergen <ericvh@kernel.org> Cc: Latchesar Ionkov <lucho@ionkov.net> Cc: Dominique Martinet <asmadeus@codewreck.org> Cc: Christian Schoenebeck <linux_oss@crudebyte.com> Cc: v9fs@lists.linux.dev Cc: linux-kernel@vger.kernel.org Signed-off-by: Mirsad Todorovac <mtodorovac69@gmail.com> Message-ID: <20241109211840.721226-2-mtodorovac69@gmail.com> Signed-off-by: Dominique Martinet <asmadeus@codewreck.org>
2024-11-15ndo_fdb_del: Add a parameter to report whether notification was sentPetr Machata
In a similar fashion to ndo_fdb_add, which was covered in the previous patch, add the bool *notified argument to ndo_fdb_del. Callees that send a notification on their own set the flag to true. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/06b1acf4953ef0a5ed153ef1f32d7292044f2be6.1731589511.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15ndo_fdb_add: Add a parameter to report whether notification was sentPetr Machata
Currently when FDB entries are added to or deleted from a VXLAN netdevice, the VXLAN driver emits one notification, including the VXLAN-specific attributes. The core however always sends a notification as well, a generic one. Thus two notifications are unnecessarily sent for these operations. A similar situation comes up with bridge driver, which also emits notifications on its own: # ip link add name vx type vxlan id 1000 dstport 4789 # bridge monitor fdb & [1] 1981693 # bridge fdb add de:ad:be:ef:13:37 dev vx self dst 192.0.2.1 de:ad:be:ef:13:37 dev vx dst 192.0.2.1 self permanent de:ad:be:ef:13:37 dev vx self permanent In order to prevent this duplicity, add a paremeter to ndo_fdb_add, bool *notified. The flag is primed to false, and if the callee sends a notification on its own, it sets it to true, thus informing the core that it should not generate another notification. Signed-off-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://patch.msgid.link/cbf6ae8195e85cbf922f8058ce4eba770f3b71ed.1731589511.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15net: netpoll: flush skb pool during cleanupBreno Leitao
The netpoll subsystem maintains a pool of 32 pre-allocated SKBs per instance, but these SKBs are not freed when the netpoll user is brought down. This leads to memory waste as these buffers remain allocated but unused. Add skb_pool_flush() to properly clean up these SKBs when netconsole is terminated, improving memory efficiency. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20241114-skb_buffers_v2-v3-2-9be9f52a8b69@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15net: netpoll: Individualize the skb poolBreno Leitao
The current implementation of the netpoll system uses a global skb pool, which can lead to inefficient memory usage and waste when targets are disabled or no longer in use. This can result in a significant amount of memory being unnecessarily allocated and retained, potentially causing performance issues and limiting the availability of resources for other system components. Modify the netpoll system to assign a skb pool to each target instead of using a global one. This approach allows for more fine-grained control over memory allocation and deallocation, ensuring that resources are only allocated and retained as needed. Signed-off-by: Breno Leitao <leitao@debian.org> Link: https://patch.msgid.link/20241114-skb_buffers_v2-v3-1-9be9f52a8b69@debian.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15net/netlink: Correct the comment on netlink message max capDmitry Safonov
Since commit d35c99ff77ec ("netlink: do not enter direct reclaim from netlink_dump()") the cap is 32KiB. Signed-off-by: Dmitry Safonov <0x7f454c46@gmail.com> Link: https://patch.msgid.link/20241113-tcp-md5-diag-prep-v2-5-00a2a7feb1fa@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-11-15xsk: Free skb when TX metadata options are invalidFelix Maurer
When a new skb is allocated for transmitting an xsk descriptor, i.e., for every non-multibuf descriptor or the first frag of a multibuf descriptor, but the descriptor is later found to have invalid options set for the TX metadata, the new skb is never freed. This can leak skbs until the send buffer is full which makes sending more packets impossible. Fix this by freeing the skb in the error path if we are currently dealing with the first frag, i.e., an skb allocated in this iteration of xsk_build_skb. Fixes: 48eb03dd2630 ("xsk: Add TX timestamp and TX checksum offload support") Reported-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: Felix Maurer <fmaurer@redhat.com> Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Stanislav Fomichev <sdf@fomichev.me> Acked-by: Martin KaFai Lau <martin.lau@kernel.org> Link: https://patch.msgid.link/edb9b00fb19e680dff5a3350cd7581c5927975a8.1731581697.git.fmaurer@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2025-04-05 06:13:47 +0000