summaryrefslogtreecommitdiff
path: root/samples
AgeCommit message (Collapse)Author
2021-02-26treewide: Miguel has movedMiguel Ojeda
Update contact info. Link: https://lkml.kernel.org/r/20210206162524.GA11520@kernel.org Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-02-24Merge tag 'char-misc-5.12-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the large set of char/misc/whatever driver subsystem updates for 5.12-rc1. Over time it seems like this tree is collecting more and more tiny driver subsystems in one place, making it easier for those maintainers, which is why this is getting larger. Included in here are: - coresight driver updates - habannalabs driver updates - virtual acrn driver addition (proper acks from the x86 maintainers) - broadcom misc driver addition - speakup driver updates - soundwire driver updates - fpga driver updates - amba driver updates - mei driver updates - vfio driver updates - greybus driver updates - nvmeem driver updates - phy driver updates - mhi driver updates - interconnect driver udpates - fsl-mc bus driver updates - random driver fix - some small misc driver updates (rtsx, pvpanic, etc.) All of these have been in linux-next for a while, with the only reported issue being a merge conflict due to the dfl_device_id addition from the fpga subsystem in here" * tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits) spmi: spmi-pmic-arb: Fix hw_irq overflow Documentation: coresight: Add PID tracing description coresight: etm-perf: Support PID tracing for kernel at EL2 coresight: etm-perf: Clarify comment on perf options ACRN: update MAINTAINERS: mailing list is subscribers-only regmap: sdw-mbq: use MODULE_LICENSE("GPL") regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ regmap: sdw: use _no_pm functions in regmap_read/write soundwire: intel: fix possible crash when no device is detected MAINTAINERS: replace my with email with replacements mhi: Fix double dma free uapi: map_to_7segment: Update example in documentation uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue firewire: replace tricky statement by two simple ones vme: make remove callback return void firmware: google: make coreboot driver's remove callback return void firmware: xilinx: Use explicit values for all enum values sample/acrn: Introduce a sample of HSM ioctl interface usage virt: acrn: Introduce an interface for Service VM to control vCPU ...
2021-02-23Merge tag 'keys-misc-20210126' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull keyring updates from David Howells: "Here's a set of minor keyrings fixes/cleanups that I've collected from various people for the upcoming merge window. A couple of them might, in theory, be visible to userspace: - Make blacklist_vet_description() reject uppercase letters as they don't match the all-lowercase hex string generated for a blacklist search. This may want reconsideration in the future, but, currently, you can't add to the blacklist keyring from userspace and the only source of blacklist keys generates lowercase descriptions. - Fix blacklist_init() to use a new KEY_ALLOC_* flag to indicate that it wants KEY_FLAG_KEEP to be set rather than passing KEY_FLAG_KEEP into keyring_alloc() as KEY_FLAG_KEEP isn't a valid alloc flag. This isn't currently a problem as the blacklist keyring isn't currently writable by userspace. The rest of the patches are cleanups and I don't think they should have any visible effect" * tag 'keys-misc-20210126' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: watch_queue: rectify kernel-doc for init_watch() certs: Replace K{U,G}IDT_INIT() with GLOBAL_ROOT_{U,G}ID certs: Fix blacklist flag type confusion PKCS#7: Fix missing include certs: Fix blacklisted hexadecimal hash string check certs/blacklist: fix kernel doc interface issue crypto: public_key: Remove redundant header file from public_key.h keys: remove trailing semicolon in macro definition crypto: pkcs7: Use match_string() helper to simplify the code PKCS#7: drop function from kernel-doc pkcs7_validate_trust_one encrypted-keys: Replace HTTP links with HTTPS ones crypto: asymmetric_keys: fix some comments in pkcs7_parser.h KEYS: remove redundant memset security: keys: delete repeated words in comments KEYS: asymmetric: Fix kerneldoc security/keys: use kvfree_sensitive() watch_queue: Drop references to /dev/watch_queue keys: Remove outdated __user annotations security: keys: Fix fall-through warnings for Clang
2021-02-22Merge tag 'docs-5.12' of git://git.lwn.net/linuxLinus Torvalds
Pull documentation updates from Jonathan Corbet: "It has been a relatively quiet cycle in docsland. - As promised, the minimum Sphinx version to build the docs is now 1.7, and we have dropped support for Python 2 entirely. That allowed the removal of a bunch of compatibility code. - A set of treewide warning fixups from Mauro that I applied after it became clear nobody else was going to deal with them. - The automarkup mechanism can now create cross-references from relative paths to RST files. - More translations, typo fixes, and warning fixes" * tag 'docs-5.12' of git://git.lwn.net/linux: (75 commits) docs: kernel-hacking: be more civil docs: Remove the Microsoft rhetoric Documentation/admin-guide: kernel-parameters: Update nohlt section doc/admin-guide: fix spelling mistake: "perfomance" -> "performance" docs: Document cross-referencing using relative path docs: Enable usage of relative paths to docs on automarkup docs: thermal: fix spelling mistakes Documentation: admin-guide: Update kvm/xen config option docs: Make syscalls' helpers naming consistent coding-style.rst: Avoid comma statements Documentation: /proc/loadavg: add 3 more field descriptions Documentation/submitting-patches: Add blurb about backtraces in commit messages Docs: drop Python 2 support Move our minimum Sphinx version to 1.7 Documentation: input: define ABS_PRESSURE/ABS_MT_PRESSURE resolution as grams scripts/kernel-doc: add internal hyperlink to DOC: sections Update Documentation/admin-guide/sysctl/fs.rst docs: Update DTB format references docs: zh_CN: add iio index.rst translation docs/zh_CN: add iio ep93xx_adc.rst translation ...
2021-02-09sample/acrn: Introduce a sample of HSM ioctl interface usageShuo Liu
Launch a simple guest (with several instructions as payload) on ACRN with demonstration ioctl usage. Signed-off-by: Shuo Liu <shuo.a.liu@intel.com> Link: https://lore.kernel.org/r/20210207031040.49576-19-shuo.a.liu@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-02-02samples: bpf: Remove unneeded semicolonYang Li
Eliminate the following coccicheck warning: ./samples/bpf/cookie_uid_helper_example.c:316:3-4: Unneeded semicolon Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/1612322248-35398-1-git-send-email-yang.lee@linux.alibaba.com
2021-02-02samples/bpf: Add include dir for MIPS Loongson64 to fix build errorsTiezhu Yang
There exists many build errors when make M=samples/bpf on the Loongson platform. This issue is MIPS related, x86 compiles just fine. Here are some errors: CLANG-bpf samples/bpf/sockex2_kern.o In file included from samples/bpf/sockex2_kern.c:2: In file included from ./include/uapi/linux/in.h:24: In file included from ./include/linux/socket.h:8: In file included from ./include/linux/uio.h:8: In file included from ./include/linux/kernel.h:11: In file included from ./include/linux/bitops.h:32: In file included from ./arch/mips/include/asm/bitops.h:19: In file included from ./arch/mips/include/asm/barrier.h:11: ./arch/mips/include/asm/addrspace.h:13:10: fatal error: 'spaces.h' file not found ^~~~~~~~~~ 1 error generated. CLANG-bpf samples/bpf/sockex2_kern.o In file included from samples/bpf/sockex2_kern.c:2: In file included from ./include/uapi/linux/in.h:24: In file included from ./include/linux/socket.h:8: In file included from ./include/linux/uio.h:8: In file included from ./include/linux/kernel.h:11: In file included from ./include/linux/bitops.h:32: In file included from ./arch/mips/include/asm/bitops.h:22: In file included from ./arch/mips/include/asm/cpu-features.h:13: In file included from ./arch/mips/include/asm/cpu-info.h:15: In file included from ./include/linux/cache.h:6: ./arch/mips/include/asm/cache.h:12:10: fatal error: 'kmalloc.h' file not found ^~~~~~~~~~~ 1 error generated. CLANG-bpf samples/bpf/sockex2_kern.o In file included from samples/bpf/sockex2_kern.c:2: In file included from ./include/uapi/linux/in.h:24: In file included from ./include/linux/socket.h:8: In file included from ./include/linux/uio.h:8: In file included from ./include/linux/kernel.h:11: In file included from ./include/linux/bitops.h:32: In file included from ./arch/mips/include/asm/bitops.h:22: ./arch/mips/include/asm/cpu-features.h:15:10: fatal error: 'cpu-feature-overrides.h' file not found ^~~~~~~~~~~~~~~~~~~~~~~~~ 1 error generated. $ find arch/mips/include/asm -name spaces.h | sort arch/mips/include/asm/mach-ar7/spaces.h ... arch/mips/include/asm/mach-generic/spaces.h ... arch/mips/include/asm/mach-loongson64/spaces.h ... arch/mips/include/asm/mach-tx49xx/spaces.h $ find arch/mips/include/asm -name kmalloc.h | sort arch/mips/include/asm/mach-generic/kmalloc.h arch/mips/include/asm/mach-ip32/kmalloc.h arch/mips/include/asm/mach-tx49xx/kmalloc.h $ find arch/mips/include/asm -name cpu-feature-overrides.h | sort arch/mips/include/asm/mach-ath25/cpu-feature-overrides.h ... arch/mips/include/asm/mach-generic/cpu-feature-overrides.h ... arch/mips/include/asm/mach-loongson64/cpu-feature-overrides.h ... arch/mips/include/asm/mach-tx49xx/cpu-feature-overrides.h In the arch/mips/Makefile, there exists the following board-dependent options: include arch/mips/Kbuild.platforms cflags-y += -I$(srctree)/arch/mips/include/asm/mach-generic So we can do the similar things in samples/bpf/Makefile, just add platform specific and generic include dir for MIPS Loongson64 to fix the build errors. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/1611669925-25315-1-git-send-email-yangtiezhu@loongson.cn
2021-01-26samples/bpf: Set flag __SANE_USERSPACE_TYPES__ for MIPS to fix build warningsTiezhu Yang
There exists many build warnings when make M=samples/bpf on the Loongson platform, this issue is MIPS related, x86 compiles just fine. Here are some warnings: CC samples/bpf/ibumad_user.o samples/bpf/ibumad_user.c: In function ‘dump_counts’: samples/bpf/ibumad_user.c:46:24: warning: format ‘%llu’ expects argument of type ‘long long unsigned int’, but argument 3 has type ‘__u64’ {aka ‘long unsigned int’} [-Wformat=] printf("0x%02x : %llu\n", key, value); ~~~^ ~~~~~ %lu CC samples/bpf/offwaketime_user.o samples/bpf/offwaketime_user.c: In function ‘print_ksym’: samples/bpf/offwaketime_user.c:34:17: warning: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 3 has type ‘__u64’ {aka ‘long unsigned int’} [-Wformat=] printf("%s/%llx;", sym->name, addr); ~~~^ ~~~~ %lx samples/bpf/offwaketime_user.c: In function ‘print_stack’: samples/bpf/offwaketime_user.c:68:17: warning: format ‘%lld’ expects argument of type ‘long long int’, but argument 3 has type ‘__u64’ {aka ‘long unsigned int’} [-Wformat=] printf(";%s %lld\n", key->waker, count); ~~~^ ~~~~~ %ld MIPS needs __SANE_USERSPACE_TYPES__ before <linux/types.h> to select 'int-ll64.h' in arch/mips/include/uapi/asm/types.h, then it can avoid build warnings when printing __u64 with %llu, %llx or %lld. The header tools/include/linux/types.h defines __SANE_USERSPACE_TYPES__, it seems that we can include <linux/types.h> in the source files which have build warnings, but it has no effect due to actually it includes usr/include/linux/types.h instead of tools/include/linux/types.h, the problem is that "usr/include" is preferred first than "tools/include" in samples/bpf/Makefile, that sounds like a ugly hack to -Itools/include before -Iusr/include. So define __SANE_USERSPACE_TYPES__ for MIPS in samples/bpf/Makefile is proper, if add "TPROGS_CFLAGS += -D__SANE_USERSPACE_TYPES__" in samples/bpf/Makefile, it appears the following error: Auto-detecting system features: ... libelf: [ on ] ... zlib: [ on ] ... bpf: [ OFF ] BPF API too old make[3]: *** [Makefile:293: bpfdep] Error 1 make[2]: *** [Makefile:156: all] Error 2 With #ifndef __SANE_USERSPACE_TYPES__ in tools/include/linux/types.h, the above error has gone and this ifndef change does not hurt other compilations. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Yonghong Song <yhs@fb.com> Link: https://lore.kernel.org/bpf/1611551146-14052-1-git-send-email-yangtiezhu@loongson.cn
2021-01-23samples/bpf: Add xdp program on egress for xdp_redirect_mapHangbin Liu
This patch add a xdp program on egress to show that we can modify the packet on egress. In this sample we will set the pkt's src mac to egress's mac address. The xdp_prog will be attached when -X option supplied. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/20210122025007.2968381-1-liuhangbin@gmail.com
2021-01-23bpf, docs: Update build procedure for manually compiling LLVM and ClangTiezhu Yang
The current LLVM and Clang build procedure in samples/bpf/README.rst is out of date. See below that the links are not accessible any more. $ git clone http://llvm.org/git/llvm.git Cloning into 'llvm'... fatal: unable to access 'http://llvm.org/git/llvm.git/': Maximum (20) redirects followed $ git clone --depth 1 http://llvm.org/git/clang.git Cloning into 'clang'... fatal: unable to access 'http://llvm.org/git/clang.git/': Maximum (20) redirects followed The LLVM community has adopted new ways to build the compiler. There are different ways to build LLVM and Clang, the Clang Getting Started page [1] has one way. As Yonghong said, it is better to copy the build procedure in Documentation/bpf/bpf_devel_QA.rst to keep consistent. I verified the procedure and it is proved to be feasible, so we should update README.rst to reflect the reality. At the same time, update the related comment in Makefile. Additionally, as Fangrui said, the dir llvm-project/llvm/build/install is not used, BUILD_SHARED_LIBS=OFF is the default option [2], so also change Documentation/bpf/bpf_devel_QA.rst together. At last, we recommend that developers who want the fastest incremental builds use the Ninja build system [1], you can find it in your system's package manager, usually the package is ninja or ninja-build [3], so add ninja to build dependencies suggested by Nathan. [1] https://clang.llvm.org/get_started.html [2] https://www.llvm.org/docs/CMake.html [3] https://github.com/ninja-build/ninja/wiki/Pre-built-Ninja-packages Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Acked-by: Yonghong Song <yhs@fb.com> Cc: Fangrui Song <maskray@google.com> Link: https://lore.kernel.org/bpf/1611279584-26047-1-git-send-email-yangtiezhu@loongson.cn
2021-01-21watch_queue: Drop references to /dev/watch_queueGabriel Krisman Bertazi
The merged API doesn't use a watch_queue device, but instead relies on pipes, so let the documentation reflect that. Fixes: f7e47677e39a ("watch_queue: Add a key/keyring notification facility") Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Ben Boeckel <mathstuf@gmail.com>
2021-01-20samples/bpf: Add BPF_ATOMIC_OP macro for BPF samplesBjörn Töpel
Brendan Jackman added extend atomic operations to the BPF instruction set in commit 7064a7341a0d ("Merge branch 'Atomics for eBPF'"), which introduces the BPF_ATOMIC_OP macro. However, that macro was missing for the BPF samples. Fix that by adding it into bpf_insn.h. Fixes: 91c960b00566 ("bpf: Rename BPF_XADD and prepare to encode other atomics in .imm") Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: Brendan Jackman <jackmanb@google.com> Link: https://lore.kernel.org/bpf/20210118091753.107572-1-bjorn.topel@gmail.com Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2021-01-18samples/kprobes: Add ARM supportMarc Koderer
Plenty of architectures are already supported and this adds ARM support. Signed-off-by: Marc Koderer <marc@koderer.com> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Link: https://lore.kernel.org/r/20210112154054.17138-1-marc@koderer.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2021-01-14bpf: Rename BPF_XADD and prepare to encode other atomics in .immBrendan Jackman
A subsequent patch will add additional atomic operations. These new operations will use the same opcode field as the existing XADD, with the immediate discriminating different operations. In preparation, rename the instruction mode BPF_ATOMIC and start calling the zero immediate BPF_ADD. This is possible (doesn't break existing valid BPF progs) because the immediate field is currently reserved MBZ and BPF_ADD is zero. All uses are removed from the tree but the BPF_XADD definition is kept around to avoid breaking builds for people including kernel headers. Signed-off-by: Brendan Jackman <jackmanb@google.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Björn Töpel <bjorn.topel@gmail.com> Link: https://lore.kernel.org/bpf/20210114181751.768687-5-jackmanb@google.com
2021-01-11samples/kprobes: Remove misleading commentMarc Koderer
The example file supports many architectures not only x86 and PPC. Signed-off-by: Marc Koderer <marc@koderer.com> Cc: trivial@kernel.org Link: https://lore.kernel.org/r/20201228060415.2194-1-marc@koderer.com Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-12-16Merge tag 'arm-soc-drivers-5.11' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "There are a couple of subsystems maintained by other people that merge their drivers through the SoC tree, those changes include: - The SCMI firmware framework gains support for sensor notifications and for controlling voltage domains. - A large update for the Tegra memory controller driver, integrating it better with the interconnect framework - The memory controller subsystem gains support for Mediatek MT8192 - The reset controller framework gains support for sharing pulsed resets For Soc specific drivers in drivers/soc, the main changes are - The Allwinner/sunxi MBUS gets a rework for the way it handles dma_map_ops and offsets between physical and dma address spaces. - An errata fix plus some cleanups for Freescale Layerscape SoCs - A cleanup for renesas drivers regarding MMIO accesses. - New SoC specific drivers for Mediatek MT8192 and MT8183 power domains - New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC identification. - Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and SDX55. - A rework of the TI AM33xx 'genpd' power domain support to use information from DT instead of platform data - Support for TI AM64x SoCs - Allow building some Amlogic drivers as modules instead of built-in Finally, there are numerous cleanups and smaller bug fixes for Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips, Renesas, and Xilinx SoCs" * tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits) soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS firmware: xilinx: Properly align function parameter firmware: xilinx: Add a blank line after function declaration firmware: xilinx: Remove additional newline firmware: xilinx: Fix kernel-doc warnings firmware: xlnx-zynqmp: fix compilation warning soc: xilinx: vcu: add missing register NUM_CORE soc: xilinx: vcu: use vcu-settings syscon registers dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding soc: xilinx: vcu: drop useless success message clk: samsung: mark PM functions as __maybe_unused soc: samsung: exynos-chipid: initialize later - with arch_initcall soc: samsung: exynos-chipid: order list of SoCs by name memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe() memory: ti-emif-sram: only build for ARMv7 memory: tegra30: Support interconnect framework memory: tegra20: Support hardware versioning and clean up OPP table initialization dt-bindings: memory: tegra20-emc: Document opp-supported-hw property soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe() reset-controller: ti: force the write operation when assert or deassert ...
2020-12-16Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID updates from Jiri Kosina: - AMD SFH (Sensor Fusion Hub) support (Sandeep Singh) - increase of maximum HID report size to 16KB in order to support some of the modern devices (Dean Camera) - control interface support for hidraw (Dean Camera) - Sony DS4 power and firmware reporting fixes (Roderick Colenbrander) - support for ghlive PS3/WII U dongles (Pascal Giard) * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (27 commits) HID: i2c-hid: add Vero K147 to descriptor override HID: ite: Add support for Acer S1002 keyboard-dock HID: sony: support for ghlive ps3/wii u dongles HID: hidraw: Add additional hidraw input/output report ioctls. HID: Increase HID maximum report size to 16KB HID: elecom: drop stray comment HID: mf: add support for 0079:1846 Mayflash/Dragonrise USB Gamecube Adapter HID: elecom: add support for EX-G M-XGL20DLBK wireless mouse HID: elecom: rewrite report based on model specific parameters HID: wacom: Constify attribute_groups HID: input: Fix fall-through warnings for Clang HID: usbhid: Fix fall-through warnings for Clang HID: logitech-hidpp: Add hid_device_id for V470 bluetooth mouse HID: intel-ish-hid: Remove unnecessary assignment to variable rv HID: sony: Workaround for DS4 dongle hotplug kernel crash. HID: sony: Don't use fw_version/hw_version for sysfs cleanup. HID: sony: Report more accurate DS4 power status. SFH: fix error return check for -ERESTARTSYS HID: SFH: Add documentation HID: hid-input: occasionally report stylus battery even if not changed ...
2020-12-16Merge branch 'for-5.11/elecom' into for-linusJiri Kosina
- support for EX-G M-XGL20DLBK device, from YOSHIOKA Takuma
2020-12-10samples/bpf: Fix possible hang in xdpsock with multiple threadsMagnus Karlsson
Fix a possible hang in xdpsock that can occur when using multiple threads. In this case, one or more of the threads might get stuck in the while-loop in tx_only after the user has signaled the main thread to stop execution. In this case, no more Tx packets will be sent, so a thread might get stuck in the aforementioned while-loop. Fix this by introducing a test inside the while-loop to check if the benchmark has been terminated. If so, return from the function. Fixes: cd9e72b6f210 ("samples/bpf: xdpsock: Add option to specify batch size") Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20201210163407.22066-1-magnus.karlsson@gmail.com
2020-12-09Merge tag 'qcom-drivers-for-5.11' of ↵Arnd Bergmann
git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers Qualcomm driver updates for v5.11 This adds support for the core power domains on MSM8916, MSM8939, SDM660 and SDX55. It adds SM8150 support to the last-level cache controller driver and it makes it possible to build the Command DB and RPMh drivers as modules. It also contains a slew of smaller cleanups, style and bug fixes throughout the various drivers. * tag 'qcom-drivers-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (39 commits) soc: qcom: rpmhpd: Add SDX55 power domains dt-bindings: power: Add rpm power domain bindings for sdx55 soc: qcom: rpmh: Use __fill_rpmh_msg API during rpmh_write() samples: qmi: Constify static qmi ops soc: qcom: pdr: Constify static qmi structs soc: qcom: initialize local variable soc: qcom: socinfo: add soc ids for msm8953 variants soc: qcom: geni: Remove "iova" check soc: qcom: llcc: Add configuration data for SM8150 dt-bindings: msm: Add LLCC for SM8150 soc: qcom: rpmh: Fix possible doc-rot in rpmh_write()'s header soc: qcom: kryo-l2-accessors: Fix misnaming of 'val' soc: qcom: rpmhpd: Provide some missing struct member descriptions soc: qcom: llcc-qcom: Fix expected kernel-doc formatting soc: qcom: smp2p: Remove unused struct attribute provide another soc: qcom: wcnss_ctrl: Demote non-conformant struct header and fix function headers soc: qcom: smsm: Fix some kernel-doc formatting and naming problems soc: qcom: smem: Fix formatting and missing documentation issues soc: qcom: qcom-geni-se: Fix misnamed function parameter 'rx_rfr' soc: qcom: qcom_aoss: Add missing description for 'cooling_devs' ... Link: https://lore.kernel.org/r/20201130190142.345246-1-bjorn.andersson@linaro.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-12-04Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-12-03 The main changes are: 1) Support BTF in kernel modules, from Andrii. 2) Introduce preferred busy-polling, from Björn. 3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh. 4) Memcg-based memory accounting for bpf objects, from Roman. 5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits) selftests/bpf: Fix invalid use of strncat in test_sockmap libbpf: Use memcpy instead of strncpy to please GCC selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module selftests/bpf: Add tp_btf CO-RE reloc test for modules libbpf: Support attachment of BPF tracing programs to kernel modules libbpf: Factor out low-level BPF program loading helper bpf: Allow to specify kernel module BTFs when attaching BPF programs bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF selftests/bpf: Add support for marking sub-tests as skipped selftests/bpf: Add bpf_testmod kernel module for testing libbpf: Add kernel module BTF support for CO-RE relocations libbpf: Refactor CO-RE relocs to not assume a single BTF object libbpf: Add internal helper to load BTF data by FD bpf: Keep module's btf_data_size intact after load bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address() selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP bpf: Adds support for setting window clamp samples/bpf: Fix spelling mistake "recieving" -> "receiving" bpf: Fix cold build of test_progs-no_alu32 ... ==================== Link: https://lore.kernel.org/r/20201204021936.85653-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Conflicts: drivers/net/ethernet/ibm/ibmvnic.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03samples/bpf: Fix spelling mistake "recieving" -> "receiving"Colin Ian King
There is a spelling mistake in an error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Björn Töpel <bjorn.topel@intel.com> Link: https://lore.kernel.org/bpf/20201203114452.1060017-1-colin.king@canonical.com
2020-12-03samples/bpf: Sample application for eBPF load and socket creation splitMariusz Dudek
Introduce a sample program to demonstrate the control and data plane split. For the control plane part a new program called xdpsock_ctrl_proc is introduced. For the data plane part, some code was added to xdpsock_user.c to act as the data plane entity. Application xdpsock_ctrl_proc works as control entity with sudo privileges (CAP_SYS_ADMIN and CAP_NET_ADMIN are sufficient) and the extended xdpsock as data plane entity with CAP_NET_RAW capability only. Usage example: sudo ./samples/bpf/xdpsock_ctrl_proc -i <interface> sudo ./samples/bpf/xdpsock -i <interface> -q <queue_id> -n <interval> -N -l -R Signed-off-by: Mariusz Dudek <mariuszx.dudek@intel.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20201203090546.11976-3-mariuszx.dudek@intel.com
2020-12-02bpf: samples: Do not touch RLIMIT_MEMLOCKRoman Gushchin
Since bpf is not using rlimit memlock for the memory accounting and control, do not change the limit in sample applications. Signed-off-by: Roman Gushchin <guro@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20201201215900.3569844-35-guro@fb.com
2020-12-01Merge tag 'trace-v5.10-rc6' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace Pull tracing fixes from Steven Rostedt: - Use correct timestamp variable for ring buffer write stamp update - Fix up before stamp and write stamp when crossing ring buffer sub buffers - Keep a zero delta in ring buffer in slow path if cmpxchg fails - Fix trace_printk static buffer for archs that care - Fix ftrace record accounting for ftrace ops with trampolines - Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency - Remove WARN_ON in hwlat tracer that triggers on something that is OK - Make "my_tramp" trampoline in ftrace direct sample code global - Fixes in the bootconfig tool for better alignment management * tag 'trace-v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ring-buffer: Always check to put back before stamp when crossing pages ftrace: Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency ftrace: Fix updating FTRACE_FL_TRAMP tracing: Fix alignment of static buffer tracing: Remove WARN_ON in start_thread() samples/ftrace: Mark my_tramp[12]? global ring-buffer: Set the right timestamp in the slow path of __rb_reserve_next() ring-buffer: Update write stamp with the correct ts docs: bootconfig: Update file format on initrd image tools/bootconfig: Align the bootconfig applied initrd image size to 4 tools/bootconfig: Fix to check the write failure correctly tools/bootconfig: Fix errno reference after printf()
2020-11-30samples/ftrace: Mark my_tramp[12]? globalSami Tolvanen
my_tramp[12]? are declared as global functions in C, but they are not marked global in the inline assembly definition. This mismatch confuses Clang's Control-Flow Integrity checking. Fix the definitions by adding .globl. Link: https://lkml.kernel.org/r/20201113183414.1446671-1-samitolvanen@google.com Fixes: 9d907f1ae80b8 ("ftrace/samples: Add a sample module that implements modify_ftrace_direct()") Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
2020-12-01samples/bpf: Add option to set the busy-poll budgetBjörn Töpel
Support for the SO_BUSY_POLL_BUDGET setsockopt, via the batching option ('b'). Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20201130185205.196029-11-bjorn.topel@gmail.com
2020-12-01samples/bpf: Add busy-poll support to xdpsockBjörn Töpel
Add a new option to xdpsock, 'B', for busy-polling. This option will also set the batching size, 'b' option, to the busy-poll budget. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20201130185205.196029-10-bjorn.topel@gmail.com
2020-12-01samples/bpf: Use recvfrom() in xdpsock/l2fwdBjörn Töpel
Start using recvfrom() the l2fwd scenario, instead of poll() which is more expensive and need additional knobs for busy-polling. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20201130185205.196029-9-bjorn.topel@gmail.com
2020-12-01samples/bpf: Use recvfrom() in xdpsock/rxdropBjörn Töpel
Start using recvfrom() the rxdrop scenario. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20201130185205.196029-8-bjorn.topel@gmail.com
2020-11-27HID: hidraw: Add additional hidraw input/output report ioctls.Dean Camera
Currently the hidraw module can only read and write feature HID reports on demand, via dedicated ioctls. Input reports are read from the device through the read() interface, while output reports are written through the write interface(). This is insufficient; it is desirable in many situations to be able to read and write input and output reports through the control interface to cover additional scenarios: - Reading an input report by its report ID, to get initial state - Writing an input report, to set initial input state in the device - Reading an output report by its report ID, to obtain current state - Writing an output report by its report ID, out of band This patch adds these missing ioctl requests to read and write the remaining HID report types. Note that not all HID backends will neccesarily support this (e.g. while the USB link layer supports setting Input reports, others may not). Also included are documentation and example updates. The current hidraw documentation states that feature reports read from the device does *not* include the report ID, however this is not the case and the returned report will have its report ID prepended by conforming HID devices, as the report data sent from the device over the control endpoint must be indentical in format to those sent over the regular transport. Signed-off-by: Dean Camera <dean@fourwalledcubicle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2020-11-26samples: bpf: Remove bpf_load loader completelyDaniel T. Lee
Numerous refactoring that rewrites BPF programs written with bpf_load to use the libbpf loader was finally completed, resulting in BPF programs using bpf_load within the kernel being completely no longer present. This commit removes bpf_load, an outdated bpf loader that is difficult to keep up with the latest kernel BPF and causes confusion. Also, this commit removes the unused trace_helper and bpf_load from samples/bpf target objects from Makefile. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201124090310.24374-8-danieltimlee@gmail.com
2020-11-26samples: bpf: Fix lwt_len_hist reusing previous BPF mapDaniel T. Lee
Currently, lwt_len_hist's map lwt_len_hist_map is uses pinning, and the map isn't cleared on test end. This leds to reuse of that map for each test, which prevents the results of the test from being accurate. This commit fixes the problem by removing of pinned map from bpffs. Also, this commit add the executable permission to shell script files. Fixes: f74599f7c5309 ("bpf: Add tests and samples for LWT-BPF") Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201124090310.24374-7-danieltimlee@gmail.com
2020-11-26samples: bpf: Refactor test_overhead program with libbpfDaniel T. Lee
This commit refactors the existing program with libbpf bpf loader. Since the kprobe, tracepoint and raw_tracepoint bpf program can be attached with single bpf_program__attach() interface, so the corresponding function of libbpf is used here. Rather than specifying the number of cpus inside the code, this commit uses the number of available cpus with _SC_NPROCESSORS_ONLN. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201124090310.24374-6-danieltimlee@gmail.com
2020-11-26samples: bpf: Refactor ibumad program with libbpfDaniel T. Lee
This commit refactors the existing ibumad program with libbpf bpf loader. Attach/detach of Tracepoint bpf programs has been managed with the generic bpf_program__attach() and bpf_link__destroy() from the libbpf. Also, instead of using the previous BPF MAP definition, this commit refactors ibumad MAP definition with the new BTF-defined MAP format. To verify that this bpf program works without an infiniband device, try loading ib_umad kernel module and test the program as follows: # modprobe ib_umad # ./ibumad Moreover, TRACE_HELPERS has been removed from the Makefile since it is not used on this program. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201124090310.24374-5-danieltimlee@gmail.com
2020-11-26samples: bpf: Refactor task_fd_query program with libbpfDaniel T. Lee
This commit refactors the existing kprobe program with libbpf bpf loader. To attach bpf program, this uses generic bpf_program__attach() approach rather than using bpf_load's load_bpf_file(). To attach bpf to perf_event, instead of using previous ioctl method, this commit uses bpf_program__attach_perf_event since it manages the enable of perf_event and attach of BPF programs to it, which is much more intuitive way to achieve. Also, explicit close(fd) has been removed since event will be closed inside bpf_link__destroy() automatically. Furthermore, to prevent conflict of same named uprobe events, O_TRUNC flag has been used to clear 'uprobe_events' interface. Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201124090310.24374-4-danieltimlee@gmail.com
2020-11-26samples: bpf: Refactor test_cgrp2_sock2 program with libbpfDaniel T. Lee
This commit refactors the existing cgroup program with libbpf bpf loader. The original test_cgrp2_sock2 has keeped the bpf program attached to the cgroup hierarchy even after the exit of user program. To implement the same functionality with libbpf, this commit uses the BPF_LINK_PINNING to pin the link attachment even after it is closed. Since this uses LINK instead of ATTACH, detach of bpf program from cgroup with 'test_cgrp2_sock' is not used anymore. The code to mount the bpf was added to the .sh file in case the bpff was not mounted on /sys/fs/bpf. Additionally, to fix the problem that shell script cannot find the binary object from the current path, relative path './' has been added in front of binary. Fixes: 554ae6e792ef3 ("samples/bpf: add userspace example for prohibiting sockets") Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201124090310.24374-3-danieltimlee@gmail.com
2020-11-26samples: bpf: Refactor hbm program with libbpfDaniel T. Lee
This commit refactors the existing cgroup programs with libbpf bpf loader. Since bpf_program__attach doesn't support cgroup program attachment, this explicitly attaches cgroup bpf program with bpf_program__attach_cgroup(bpf_prog, cg1). Also, to change attach_type of bpf program, this uses libbpf's bpf_program__set_expected_attach_type helper to switch EGRESS to INGRESS. To keep bpf program attached to the cgroup hierarchy even after the exit, this commit uses the BPF_LINK_PINNING to pin the link attachment even after it is closed. Besides, this program was broken due to the typo of BPF MAP definition. But this commit solves the problem by fixing this from 'queue_stats' map struct hvm_queue_stats -> hbm_queue_stats. Fixes: 36b5d471135c ("selftests/bpf: samples/bpf: Split off legacy stuff from bpf_helpers.h") Signed-off-by: Daniel T. Lee <danieltimlee@gmail.com> Signed-off-by: Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/20201124090310.24374-2-danieltimlee@gmail.com
2020-11-24samples: qmi: Constify static qmi opsRikard Falkeborn
The only usage of qmi_sample_handlers[] and lookup_ops is to pass their addresses to qmi_handle_init() which accepts const pointers to both qmi_ops and qmi_msg_handler. Make them const to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20201124212954.17750-1-rikard.falkeborn@gmail.com Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2020-11-17samples/bpf: Increment Tx stats at sendingMagnus Karlsson
Increment the statistics over how many Tx packets have been sent at the time of sending instead of at the time of completion. This as a completion event means that the buffer has been sent AND returned to user space. The packet always gets sent shortly after sendto() is called. The kernel might, for performance reasons, decide to not return every single buffer to user space immediately after sending, for example, only after a batch of packets have been transmitted. Incrementing the number of packets sent at completion, will in that case be confusing as if you send a single packet, the counter might show zero for a while even though the packet has been transmitted. Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/1605525167-14450-2-git-send-email-magnus.karlsson@gmail.com
2020-11-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-11-14 1) Add BTF generation for kernel modules and extend BTF infra in kernel e.g. support for split BTF loading and validation, from Andrii Nakryiko. 2) Support for pointers beyond pkt_end to recognize LLVM generated patterns on inlined branch conditions, from Alexei Starovoitov. 3) Implements bpf_local_storage for task_struct for BPF LSM, from KP Singh. 4) Enable FENTRY/FEXIT/RAW_TP tracing program to use the bpf_sk_storage infra, from Martin KaFai Lau. 5) Add XDP bulk APIs that introduce a defer/flush mechanism to optimize the XDP_REDIRECT path, from Lorenzo Bianconi. 6) Fix a potential (although rather theoretical) deadlock of hashtab in NMI context, from Song Liu. 7) Fixes for cross and out-of-tree build of bpftool and runqslower allowing build for different target archs on same source tree, from Jean-Philippe Brucker. 8) Fix error path in htab_map_alloc() triggered from syzbot, from Eric Dumazet. 9) Move functionality from test_tcpbpf_user into the test_progs framework so it can run in BPF CI, from Alexander Duyck. 10) Lift hashtab key_size limit to be larger than MAX_BPF_STACK, from Florian Lehner. Note that for the fix from Song we have seen a sparse report on context imbalance which requires changes in sparse itself for proper annotation detection where this is currently being discussed on linux-sparse among developers [0]. Once we have more clarification/guidance after their fix, Song will follow-up. [0] https://lore.kernel.org/linux-sparse/CAHk-=wh4bx8A8dHnX612MsDO13st6uzAz1mJ1PaHHVevJx_ZCw@mail.gmail.com/T/ https://lore.kernel.org/linux-sparse/20201109221345.uklbp3lzgq6g42zb@ltop.local/T/ * git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (66 commits) net: mlx5: Add xdp tx return bulking support net: mvpp2: Add xdp tx return bulking support net: mvneta: Add xdp tx return bulking support net: page_pool: Add bulk support for ptr_ring net: xdp: Introduce bulking for xdp tx return path bpf: Expose bpf_d_path helper to sleepable LSM hooks bpf: Augment the set of sleepable LSM hooks bpf: selftest: Use bpf_sk_storage in FENTRY/FEXIT/RAW_TP bpf: Allow using bpf_sk_storage in FENTRY/FEXIT/RAW_TP bpf: Rename some functions in bpf_sk_storage bpf: Folding omem_charge() into sk_storage_charge() selftests/bpf: Add asm tests for pkt vs pkt_end comparison. selftests/bpf: Add skb_pkt_end test bpf: Support for pointers beyond pkt_end. tools/bpf: Always run the *-clean recipes tools/bpf: Add bootstrap/ to .gitignore bpf: Fix NULL dereference in bpf_task_storage tools/bpftool: Fix build slowdown tools/runqslower: Build bpftool using HOSTCC tools/runqslower: Enable out-of-tree build ... ==================== Link: https://lore.kernel.org/r/20201114020819.29584-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-10samples/bpf: Remove unused test_ipip.shHangbin Liu
The tcbpf2_kern.o and related kernel sections are moved to bpf selftest folder since b05cd7404323 ("samples/bpf: remove the bpf tunnel testsuite."). Remove this one as well. Fixes: b05cd7404323 ("samples/bpf: remove the bpf tunnel testsuite.") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20201110015013.1570716-3-liuhangbin@gmail.com
2020-11-10samples/bpf: Remove duplicate include in hbmMenglong Dong
The 'bpf/bpf.h' include in 'samples/bpf/hbm.c' is duplicated. Signed-off-by: Menglong Dong <dong.menglong@zte.com.cn> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/1604654034-52821-1-git-send-email-dong.menglong@zte.com.cn
2020-11-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski
Alexei Starovoitov says: ==================== pull-request: bpf 2020-11-06 1) Pre-allocated per-cpu hashmap needs to zero-fill reused element, from David. 2) Tighten bpf_lsm function check, from KP. 3) Fix bpftool attaching to flow dissector, from Lorenz. 4) Use -fno-gcse for the whole kernel/bpf/core.c instead of function attribute, from Ard. * git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Update verification logic for LSM programs bpf: Zero-fill re-used per-cpu map element bpf: BPF_PRELOAD depends on BPF_SYSCALL tools/bpftool: Fix attaching flow dissector libbpf: Fix possible use after free in xsk_socket__delete libbpf: Fix null dereference in xsk_socket__delete libbpf, hashmap: Fix undefined behavior in hash_bits bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE tools, bpftool: Remove two unused variables. tools, bpftool: Avoid array index warnings. xsk: Fix possible memory leak at socket close bpf: Add struct bpf_redir_neigh forward declaration to BPF helper defs samples/bpf: Set rlimit for memlock to infinity in all samples bpf: Fix -Wshadow warnings selftest/bpf: Fix profiler test using CO-RE relocation for enums ==================== Link: https://lore.kernel.org/r/20201106221759.24143-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-28misc: mic: remove the MIC driversSudeep Dutt
This patch removes the MIC drivers from the kernel tree since the corresponding devices have been discontinued. Removing the dma and char-misc changes in one patch and merging via the char-misc tree is best to avoid any potential build breakage. Cc: Nikhil Rao <nikhil.rao@intel.com> Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com> Acked-By: Vinod Koul <vkoul@kernel.org> Reviewed-by: Sherry Sun <sherry.sun@nxp.com> Link: https://lore.kernel.org/r/8c1443136563de34699d2c084df478181c205db4.1603854416.git.sudeep.dutt@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-27samples/bpf: Set rlimit for memlock to infinity in all samplesToke Høiland-Jørgensen
The memlock rlimit is a notorious source of failure for BPF programs. Most of the samples just set it to infinity, but a few used a lower limit. The problem with unconditionally setting a lower limit is that this will also override the limit if the system-wide setting is *higher* than the limit being set, which can lead to failures on systems that lock a lot of memory, but set 'ulimit -l' to unlimited before running a sample. One fix for this is to only conditionally set the limit if the current limit is lower, but it is simpler to just unify all the samples and have them all set the limit to infinity. Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/bpf/20201026233623.91728-1-toke@redhat.com
2020-10-22bpf, libbpf: Guard bpf inline asm from bpf_tail_call_staticDaniel Borkmann
Yaniv reported a compilation error after pulling latest libbpf: [...] ../libbpf/src/root/usr/include/bpf/bpf_helpers.h:99:10: error: unknown register name 'r0' in asm : "r0", "r1", "r2", "r3", "r4", "r5"); [...] The issue got triggered given Yaniv was compiling tracing programs with native target (e.g. x86) instead of BPF target, hence no BTF generated vmlinux.h nor CO-RE used, and later llc with -march=bpf was invoked to compile from LLVM IR to BPF object file. Given that clang was expecting x86 inline asm and not BPF one the error complained that these regs don't exist on the former. Guard bpf_tail_call_static() with defined(__bpf__) where BPF inline asm is valid to use. BPF tracing programs on more modern kernels use BPF target anyway and thus the bpf_tail_call_static() function will be available for them. BPF inline asm is supported since clang 7 (clang <= 6 otherwise throws same above error), and __bpf_unreachable() since clang 8, therefore include the latter condition in order to prevent compilation errors for older clang versions. Given even an old Ubuntu 18.04 LTS has official LLVM packages all the way up to llvm-10, I did not bother to special case the __bpf_unreachable() inside bpf_tail_call_static() further. Also, undo the sockex3_kern's use of bpf_tail_call_static() sample given they still have the old hacky way to even compile networking progs with native instead of BPF target so bpf_tail_call_static() won't be defined there anymore. Fixes: 0e9f6841f664 ("bpf, libbpf: Add bpf_tail_call_static helper for bpf programs") Reported-by: Yaniv Agman <yanivagman@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Andrii Nakryiko <andrii@kernel.org> Acked-by: Yonghong Song <yhs@fb.com> Tested-by: Yaniv Agman <yanivagman@gmail.com> Link: https://lore.kernel.org/bpf/CAMy7=ZUk08w5Gc2Z-EKi4JFtuUCaZYmE4yzhJjrExXpYKR4L8w@mail.gmail.com Link: https://lore.kernel.org/bpf/20201021203257.26223-1-daniel@iogearbox.net
2020-10-15Merge tag 'net-next-5.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: - Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. - Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). - Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. - Allow more than 255 IPv4 multicast interfaces. - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. - In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. - Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. - Allow more calls to same peer in RxRPC. - Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. - Add TC actions for implementing MPLS L2 VPNs. - Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. - Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. - Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. - Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. - Support sleepable BPF programs, initially targeting LSM and tracing. - Add bpf_d_path() helper for returning full path for given 'struct path'. - Make bpf_tail_call compatible with bpf-to-bpf calls. - Allow BPF programs to call map_update_elem on sockmaps. - Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). - Support listing and getting information about bpf_links via the bpf syscall. - Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). - Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. - Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). - In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. - Add XDP support for Intel's igb driver. - Support offloading TC flower classification and filtering rules to mscc_ocelot switches. - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. - Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. - Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. - Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. - Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. - Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). * tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits) Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH" net, sockmap: Don't call bpf_prog_put() on NULL pointer bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo bpf, sockmap: Add locking annotations to iterator netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements net: fix pos incrementment in ipv6_route_seq_next net/smc: fix invalid return code in smcd_new_buf_create() net/smc: fix valid DMBE buffer sizes net/smc: fix use-after-free of delayed events bpfilter: Fix build error with CONFIG_BPFILTER_UMH cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info bpf: Fix register equivalence tracking. rxrpc: Fix loss of final ack on shutdown rxrpc: Fix bundle counting for exclusive connections netfilter: restore NF_INET_NUMHOOKS ibmveth: Identify ingress large send packets. ibmveth: Switch order of ibmveth_helper calls. cxgb4: handle 4-tuple PEDIT to NAT mode translation selftests: Add VRF route leaking tests ...
2020-10-15Merge tag 'configfs-5.10' of git://git.infradead.org/users/hch/configfsLinus Torvalds
Pull configfs updates from Christoph Hellwig: "Various cleanups for the configfs samples (Bartosz Golaszewski)" * tag 'configfs-5.10' of git://git.infradead.org/users/hch/configfs: samples: configfs: prefer pr_err() over bare printk(KERN_ERR samples: configfs: don't use spaces before tabs samples: configfs: consolidate local variables of the same type samples: configfs: don't reinitialize variables which are already zeroed samples: configfs: replace simple_strtoul() with kstrtoint() samples: configfs: fix alignment in item struct samples: configfs: drop unnecessary ternary operators samples: configfs: remove redundant newlines MAINTAINERS: add the sample directory to the configfs entry