summaryrefslogtreecommitdiff
path: root/scripts/Makefile.asm-generic
AgeCommit message (Collapse)Author
2021-03-15kbuild: prefix $(srctree)/ to some included MakefilesMasahiro Yamada
VPATH is used in Kbuild to make pattern rules search for prerequisites in both $(objtree) and $(srctree). Some of *.c, *.S files are not real sources, but generated by tools such as flex, bison, perl. In contrast, I doubt the benefit of --include-dir=$(abs_srctree) because it is always clear which Makefiles are real sources, and which are not. So, my hope is to add $(srctree)/ prefix to all check-in Makefiles, then remove --include-dir=$(abs_srctree) flag in the future. I am touching only some Kbuild core parts for now. Treewide fixes will be needed to achieve this goal. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2019-03-17kbuild: force all architectures except um to include mandatory-yMasahiro Yamada
Currently, every arch/*/include/uapi/asm/Kbuild explicitly includes the common Kbuild.asm file. Factor out the duplicated include directives to scripts/Makefile.asm-generic so that no architecture would opt out of the mandatory-y mechanism. um is not forced to include mandatory-y since it is a very exceptional case which does not support UAPI. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-03-17kbuild: warn redundant generic-yMasahiro Yamada
The generic-y is redundant under the following condition: - arch has its own implementation - the same header is added to generated-y - the same header is added to mandatory-y If a redundant generic-y is found, the warning like follows is displayed: scripts/Makefile.asm-generic:20: redundant generic-y found in arch/arm/include/asm/Kbuild: timex.h I fixed up arch Kbuild files found by this. Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-01-06kbuild: generate asm-generic wrappers if mandatory headers are missingMasahiro Yamada
Some time ago, Sam pointed out a certain degree of overwrap between generic-y and mandatory-y. (https://lkml.org/lkml/2017/7/10/121) I tweaked the meaning of mandatory-y a little bit; now it defines the minimum set of ASM headers that all architectures must have. If arch does not have specific implementation of a mandatory header, Kbuild will let it fallback to the asm-generic one by automatically generating a wrapper. This will allow to drop lots of redundant generic-y defines. Previously, "mandatory" was used in the context of UAPI, but I guess this can be extended to kernel space ASM headers. Suggested-by: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2018-12-17kbuild: refactor Makefile.asm-genericMasahiro Yamada
- Use conventional $(MAKE) $(asm-generic)=<dir> style for directory descending - Remove unneeded FORCE since "all" is a phony target - Remove unneeded "_dummy :=" assignment - Skip $(shell mkdir ...) when headers exist in the directory - Misc cleanups Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2017-11-17Merge tag 'kbuild-v4.15' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: "One of the most remarkable improvements in this cycle is, Kbuild is now able to cache the result of shell commands. Some variables are expensive to compute, for example, $(call cc-option,...) invokes the compiler. It is not efficient to redo this computation every time, even when we are not actually building anything. Kbuild creates a hidden file ".cache.mk" that contains invoked shell commands and their results. The speed-up should be noticeable. Summary: - Fix arch build issues (hexagon, sh) - Clean up various Makefiles and scripts - Fix wrong usage of {CFLAGS,LDFLAGS}_MODULE in arch Makefiles - Cache variables that are expensive to compute - Improve cc-ldopton and ld-option for Clang - Optimize output directory creation" * tag 'kbuild-v4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits) kbuild: move coccicheck help from scripts/Makefile.help to top Makefile sh: decompressor: add shipped files to .gitignore frv: .gitignore: ignore vmlinux.lds selinux: remove unnecessary assignment to subdir- kbuild: specify FORCE in Makefile.headersinst as .PHONY target kbuild: remove redundant mkdir from ./Kbuild kbuild: optimize object directory creation for incremental build kbuild: create object directories simpler and faster kbuild: filter-out PHONY targets from "targets" kbuild: remove redundant $(wildcard ...) for cmd_files calculation kbuild: create directory for make cache only when necessary sh: select KBUILD_DEFCONFIG depending on ARCH kbuild: fix linker feature test macros when cross compiling with Clang kbuild: shrink .cache.mk when it exceeds 1000 lines kbuild: do not call cc-option before KBUILD_CFLAGS initialization kbuild: Cache a few more calls to the compiler kbuild: Add a cache for generated variables kbuild: add forward declaration of default target to Makefile.asm-generic kbuild: remove KBUILD_SUBDIR_ASFLAGS and KBUILD_SUBDIR_CCFLAGS hexagon/kbuild: replace CFLAGS_MODULE with KBUILD_CFLAGS_MODULE ...
2017-11-13kbuild: add forward declaration of default target to Makefile.asm-genericMasahiro Yamada
$(kbuild-file) and Kbuild.include are included before the default target "all". We will add a target into Kbuild.include. In advance, add a forward declaration of the default target. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Douglas Anderson <dianders@chromium.org>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-08-25kbuild: update comments of Makefile.asm-genericCao jin
Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-06-22kbuild: replace genhdr-y with generated-yMasahiro Yamada
Originally, generated-y and genhdr-y had different meaning, like follows: - generated-y: generated headers (other than asm-generic wrappers) - header-y : headers to be exported - genhdr-y : generated headers to be exported (generated-y + header-y) Since commit fcc8487d477a ("uapi: export all headers under uapi directories"), headers under UAPI directories are all exported. So, there is no more difference between generated-y and genhdr-y. We see two users of genhdr-y, arch/{arm,x86}/include/uapi/asm/Kbuild. They generate some headers in arch/{arm,x86}/include/generated/uapi/asm directories, which are obviously exported. Replace them with generated-y, and abolish genhdr-y. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
2016-07-07kbuild: Remove stale asm-generic wrappersJames Hogan
When a header file is removed from generic-y (often accompanied by the addition of an arch specific header), the generated wrapper file will persist, and in some cases may still take precedence over the new arch header. For example commit f1fe2d21f4e1 ("MIPS: Add definitions for extended context") removed ucontext.h from generic-y in arch/mips/include/asm/, and added an arch/mips/include/uapi/asm/ucontext.h. The continued use of the wrapper when reusing a dirty build tree resulted in build failures in arch/mips/kernel/signal.c: arch/mips/kernel/signal.c: In function ‘sc_to_extcontext’: arch/mips/kernel/signal.c:142:12: error: ‘struct ucontext’ has no member named ‘uc_extcontext’ return &uc->uc_extcontext; ^ Fix by detecting and removing wrapper headers in generated header directories that do not correspond to a filename in generic-y, genhdr-y, or the newly introduced generated-y. Reported-by: Jacek Anaszewski <j.anaszewski@samsung.com> Reported-by: Hauke Mehrtens <hauke@hauke-m.de> Reported-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Cc: linux-arch@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-kbuild@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Michal Marek <mmarek@suse.com> Link: http://lkml.kernel.org/r/1466808144-23209-3-git-send-email-james.hogan@imgtec.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-06-10kbuild: trivial - remove trailing empty linesMasahiro Yamada
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
2012-10-17uapi: Allow automatic generation of uapi/asm/ header filesCatalin Marinas
Several arch/*/include/uapi/asm/* header simply include the corresponding <asm-generic/*> file. This patch allows such files to be specified in uapi/asm/Kbuild via "generic-y += ..." to be automatically generated (similar to asm/Kbuild). Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: David Howells <dhowells@redhat.com> Cc: Michal Marek <mmarek@suse.cz> Cc: Arnd Bergmann <arnd@arndb.de>
2011-06-09kbuild: silence Nothing to be done for 'all' messagePeter Foley
This patch silences a Makefile.asm-generic message by defining a dummy rule for all. make -f /usr/src/git/scripts/Makefile.asm-generic \ obj=arch/x86/include/generated/asm make[1]: Nothing to be done for `all'. Signed-off-by: Peter Foley <pefoley2@verizon.net> Signed-off-by: Michal Marek <mmarek@suse.cz>
2011-05-02kbuild: Fix Makefile.asm-generic for umMichal Marek
Do nothing if arch/$(SRCARCH)/include/asm/Kbuild does not exist, which is the case of um. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Michal Marek <mmarek@suse.cz> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Sam Ravnborg <sam@ravnborg.org>
2011-04-28kbuild: asm-generic supportSam Ravnborg
There is an increasing amount of header files shared between individual architectures in asm-generic. To avoid a lot of dummy wrapper files that just include the corresponding file in asm-generic provide some basic support in kbuild for this. With the following patch an architecture can maintain a list of files in the file arch/$(ARCH)/include/asm/Kbuild To use a generic file just add: generic-y += <name-of-header-file.h> For each file listed kbuild will generate the necessary wrapper in arch/$(ARCH)/include/generated/asm. When installing userspace headers a wrapper is likewise created. The original inspiration for this came from the unicore32 patchset - although a different method is used. The patch includes several improvements from Arnd Bergmann. Michael Marek contributed Makefile.asm-generic. Remis Baima did an intial implementation along to achive the same - see https://patchwork.kernel.org/patch/13352/ Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Guan Xuetao <guanxuetao@mprc.pku.edu.cn> Tested-by: Guan Xuetao <guanxuetao@mprc.pku.edu.cn> Acked-by: Arnd Bergmann <arnd@arndb.de> Cc: Remis Lima Baima <remis.developer@googlemail.com> Signed-off-by: Michal Marek <mmarek@suse.cz>