summaryrefslogtreecommitdiff
path: root/scripts/Makefile
AgeCommit message (Collapse)Author
2024-05-14LoongArch: rust: Switch to use built-in rustc targetWANG Rui
This commit switches to use the LoongArch's built-in rustc target 'loongarch64-unknown-none-softfloat'. The Rust samples have been tested. Acked-by: Miguel Ojeda <ojeda@kernel.org> Tested-by: Miguel Ojeda <ojeda@kernel.org> Signed-off-by: WANG Rui <wangrui@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-03-22Merge tag 'loongarch-6.9' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson Pull LoongArch updates from Huacai Chen: - Add objtool support for LoongArch - Add ORC stack unwinder support for LoongArch - Add kernel livepatching support for LoongArch - Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig - Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig - Some bug fixes and other small changes * tag 'loongarch-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: LoongArch/crypto: Clean up useless assignment operations LoongArch: Define the __io_aw() hook as mmiowb() LoongArch: Remove superfluous flush_dcache_page() definition LoongArch: Move {dmw,tlb}_virt_to_page() definition to page.h LoongArch: Change __my_cpu_offset definition to avoid mis-optimization LoongArch: Select HAVE_ARCH_USERFAULTFD_MINOR in Kconfig LoongArch: Select ARCH_HAS_CURRENT_STACK_POINTER in Kconfig LoongArch: Add kernel livepatching support LoongArch: Add ORC stack unwinder support objtool: Check local label in read_unwind_hints() objtool: Check local label in add_dead_ends() objtool/LoongArch: Enable orc to be built objtool/x86: Separate arch-specific and generic parts objtool/LoongArch: Implement instruction decoder objtool/LoongArch: Enable objtool to be built
2024-03-11LoongArch: Add ORC stack unwinder supportTiezhu Yang
The kernel CONFIG_UNWINDER_ORC option enables the ORC unwinder, which is similar in concept to a DWARF unwinder. The difference is that the format of the ORC data is much simpler than DWARF, which in turn allows the ORC unwinder to be much simpler and faster. The ORC data consists of unwind tables which are generated by objtool. After analyzing all the code paths of a .o file, it determines information about the stack state at each instruction address in the file and outputs that information to the .orc_unwind and .orc_unwind_ip sections. The per-object ORC sections are combined at link time and are sorted and post-processed at boot time. The unwinder uses the resulting data to correlate instruction addresses with their stack states at run time. Most of the logic are similar with x86, in order to get ra info before ra is saved into stack, add ra_reg and ra_offset into orc_entry. At the same time, modify some arch-specific code to silence the objtool warnings. Co-developed-by: Jinyang He <hejinyang@loongson.cn> Signed-off-by: Jinyang He <hejinyang@loongson.cn> Co-developed-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Youling Tang <tangyouling@loongson.cn> Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
2024-02-09rust: Refactor the build target to allow the use of builtin targetsJamie Cunliffe
Eventually we want all architectures to be using the target as defined by rustc. However currently some architectures can't do that and are using the target.json specification. This puts in place the foundation to allow the use of the builtin target definition or a target.json specification. Signed-off-by: Jamie Cunliffe <Jamie.Cunliffe@arm.com> Acked-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Alice Ryhl <aliceryhl@google.com> Link: https://lore.kernel.org/r/20231020155056.3495121-2-Jamie.Cunliffe@arm.com [catalin.marinas@arm.com: squashed loongarch ifneq fix from WANG Rui] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2023-07-19rust: support running Rust documentation tests as KUnit onesMiguel Ojeda
Rust has documentation tests: these are typically examples of usage of any item (e.g. function, struct, module...). They are very convenient because they are just written alongside the documentation. For instance: /// Sums two numbers. /// /// ``` /// assert_eq!(mymod::f(10, 20), 30); /// ``` pub fn f(a: i32, b: i32) -> i32 { a + b } In userspace, the tests are collected and run via `rustdoc`. Using the tool as-is would be useful already, since it allows to compile-test most tests (thus enforcing they are kept in sync with the code they document) and run those that do not depend on in-kernel APIs. However, by transforming the tests into a KUnit test suite, they can also be run inside the kernel. Moreover, the tests get to be compiled as other Rust kernel objects instead of targeting userspace. On top of that, the integration with KUnit means the Rust support gets to reuse the existing testing facilities. For instance, the kernel log would look like: KTAP version 1 1..1 KTAP version 1 # Subtest: rust_doctests_kernel 1..59 # rust_doctest_kernel_build_assert_rs_0.location: rust/kernel/build_assert.rs:13 ok 1 rust_doctest_kernel_build_assert_rs_0 # rust_doctest_kernel_build_assert_rs_1.location: rust/kernel/build_assert.rs:56 ok 2 rust_doctest_kernel_build_assert_rs_1 # rust_doctest_kernel_init_rs_0.location: rust/kernel/init.rs:122 ok 3 rust_doctest_kernel_init_rs_0 ... # rust_doctest_kernel_types_rs_2.location: rust/kernel/types.rs:150 ok 59 rust_doctest_kernel_types_rs_2 # rust_doctests_kernel: pass:59 fail:0 skip:0 total:59 # Totals: pass:59 fail:0 skip:0 total:59 ok 1 rust_doctests_kernel Therefore, add support for running Rust documentation tests in KUnit. Some other notes about the current implementation and support follow. The transformation is performed by a couple scripts written as Rust hostprogs. Tests using the `?` operator are also supported as usual, e.g.: /// ``` /// # use kernel::{spawn_work_item, workqueue}; /// spawn_work_item!(workqueue::system(), || pr_info!("x"))?; /// # Ok::<(), Error>(()) /// ``` The tests are also compiled with Clippy under `CLIPPY=1`, just like normal code, thus also benefitting from extra linting. The names of the tests are currently automatically generated. This allows to reduce the burden for documentation writers, while keeping them fairly stable for bisection. This is an improvement over the `rustdoc`-generated names, which include the line number; but ideally we would like to get `rustdoc` to provide the Rust item path and a number (for multiple examples in a single documented Rust item). In order for developers to easily see from which original line a failed doctests came from, a KTAP diagnostic line is printed to the log, containing the location (file and line) of the original test (i.e. instead of the location in the generated Rust file): # rust_doctest_kernel_types_rs_2.location: rust/kernel/types.rs:150 This line follows the syntax for declaring test metadata in the proposed KTAP v2 spec [1], which may be used for the proposed KUnit test attributes API [2]. Thus hopefully this will make migration easier later on (suggested by David [3]). The original line in that test attribute is figured out by providing an anchor (suggested by Boqun [4]). The original file is found by walking the filesystem, checking directory prefixes to reduce the amount of combinations to check, and it is only done once per file. Ambiguities are detected and reported. A notable difference from KUnit C tests is that the Rust tests appear to assert using the usual `assert!` and `assert_eq!` macros from the Rust standard library (`core`). We provide a custom version that forwards the call to KUnit instead. Importantly, these macros do not require passing context, unlike the KUnit C ones (i.e. `struct kunit *`). This makes them easier to use, and readers of the documentation do not need to care about which testing framework is used. In addition, it may allow us to test third-party code more easily in the future. However, a current limitation is that KUnit does not support assertions in other tasks. Thus we presently simply print an error to the kernel log if an assertion actually failed. This should be revisited to properly fail the test, perhaps saving the context somewhere else, or letting KUnit handle it. Link: https://lore.kernel.org/lkml/20230420205734.1288498-1-rmoar@google.com/ [1] Link: https://lore.kernel.org/linux-kselftest/20230707210947.1208717-1-rmoar@google.com/ [2] Link: https://lore.kernel.org/rust-for-linux/CABVgOSkOLO-8v6kdAGpmYnZUb+LKOX0CtYCo-Bge7r_2YTuXDQ@mail.gmail.com/ [3] Link: https://lore.kernel.org/rust-for-linux/ZIps86MbJF%2FiGIzd@boqun-archlinux/ [4] Signed-off-by: Miguel Ojeda <ojeda@kernel.org> Reviewed-by: David Gow <davidgow@google.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2023-03-16kbuild: use git-archive for source package creationMasahiro Yamada
Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") added a new tool, scripts/list-gitignored. My intention was to create source packages without cleaning the source tree, without relying on git. Linus strongly objected to it, and suggested using 'git archive' instead. [1] [2] [3] This commit goes in that direction - Remove scripts/list-gitignored.c and rewrites Makefiles and scripts to use 'git archive' for building Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg' use 'git archive' again. Going forward, building source packages is only possible in a git-managed tree. Building binary packages does not require git. [1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/ [2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/ [3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/ Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git") Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git") Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-02-16kbuild: add a tool to list files ignored by gitMasahiro Yamada
In short, the motivation of this commit is to build a source package without cleaning the source tree. The deb-pkg and (src)rpm-pkg targets first run 'make clean' before creating a source tarball. Otherwise build artifacts such as *.o, *.a, etc. would be included in the tarball. Yet, the tarball ends up containing several garbage files since 'make clean' does not clean everything. Cleaning the tree every time is annoying since it makes the incremental build impossible. It is desirable to create a source tarball without cleaning the tree. In fact, there are some ways to achieve this. The easiest solution is 'git archive'. 'make perf-tar*-src-pkg' uses it, but I do not like it because it works only when the source tree is managed by git, and all files you want in the tarball must be committed in advance. I want to make it work without relying on git. We can do this. Files that are ignored by git are generated files, so should be excluded from the source tarball. We can list them out by parsing the .gitignore files. Of course, .gitignore does not cover all the cases, but it works well enough. tar(1) claims to support it: --exclude-vcs-ignores Exclude files that match patterns read from VCS-specific ignore files. Supported files are: .cvsignore, .gitignore, .bzrignore, and .hgignore. The best scenario would be to use 'tar --exclude-vcs-ignores', but this option does not work. --exclude-vcs-ignore does not understand any of the negation (!), preceding slash, following slash, etc.. So, this option is just useless. Hence, I wrote this gitignore parser. The previous version [1], written in Python, was so slow. This version is implemented in C, so it works much faster. I imported the code from git (commit: 23c56f7bd5f1), so we get the same result. This tool traverses the source tree, parsing all .gitignore files, and prints file paths that are ignored by git. The output is similar to 'git ls-files --ignored --directory --others --exclude-per-directory=.gitignore', except [1] Not sorted [2] No trailing slash for directories [2] is intentional because tar's --exclude-from option cannot handle trailing slashes. [How to test this tool] $ git clean -dfx $ make -s -j$(nproc) defconfig all # or allmodconifg or whatever $ git archive -o ../linux1.tar --prefix=./ HEAD $ tar tf ../linux1.tar | LANG=C sort > ../file-list1 # files emitted by 'git archive' $ make scripts_package HOSTCC scripts/list-gitignored $ scripts/list-gitignored --prefix=./ -o ../exclude-list $ tar cf ../linux2.tar --exclude-from=../exclude-list . $ tar tf ../linux2.tar | LANG=C sort > ../file-list2 # files emitted by 'tar' $ diff ../file-list1 ../file-list2 | grep -E '^(<|>)' < ./Documentation/devicetree/bindings/.yamllint < ./drivers/clk/.kunitconfig < ./drivers/gpu/drm/tests/.kunitconfig < ./drivers/hid/.kunitconfig < ./fs/ext4/.kunitconfig < ./fs/fat/.kunitconfig < ./kernel/kcsan/.kunitconfig < ./lib/kunit/.kunitconfig < ./mm/kfence/.kunitconfig < ./tools/testing/selftests/arm64/tags/ < ./tools/testing/selftests/arm64/tags/.gitignore < ./tools/testing/selftests/arm64/tags/Makefile < ./tools/testing/selftests/arm64/tags/run_tags_test.sh < ./tools/testing/selftests/arm64/tags/tags_test.c < ./tools/testing/selftests/kvm/.gitignore < ./tools/testing/selftests/kvm/Makefile < ./tools/testing/selftests/kvm/config < ./tools/testing/selftests/kvm/settings The source tarball contains most of files that are tracked by git. You see some diffs, but it is just because some .gitignore files are wrong. $ git ls-files -i -c --exclude-per-directory=.gitignore Documentation/devicetree/bindings/.yamllint drivers/clk/.kunitconfig drivers/gpu/drm/tests/.kunitconfig drivers/hid/.kunitconfig fs/ext4/.kunitconfig fs/fat/.kunitconfig kernel/kcsan/.kunitconfig lib/kunit/.kunitconfig mm/kfence/.kunitconfig tools/testing/selftests/arm64/tags/.gitignore tools/testing/selftests/arm64/tags/Makefile tools/testing/selftests/arm64/tags/run_tags_test.sh tools/testing/selftests/arm64/tags/tags_test.c tools/testing/selftests/kvm/.gitignore tools/testing/selftests/kvm/Makefile tools/testing/selftests/kvm/config tools/testing/selftests/kvm/settings [1]: https://lore.kernel.org/all/20230128173843.765212-1-masahiroy@kernel.org/ Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2023-01-26scripts: remove bin2cMasahiro Yamada
Commit 80f8be7af03f ("tomoyo: Omit use of bin2c") removed the last use of bin2c. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Nicolas Schier <nicolas@fjasle.eu> Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
2023-01-22kbuild: rust: move rust/target.json to scripts/Masahiro Yamada
scripts/ is a better place to generate files used treewide. With target.json moved to scripts/, you do not need to add target.json to no-clean-files or MRPROPER_FILES. 'make clean' does not visit scripts/, but 'make mrproper' does. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> Tested-by: Miguel Ojeda <ojeda@kernel.org>
2022-09-28Kbuild: add Rust supportMiguel Ojeda
Having most of the new files in place, we now enable Rust support in the build system, including `Kconfig` entries related to Rust, the Rust configuration printer and a few other bits. Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Tested-by: Nick Desaulniers <ndesaulniers@google.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Co-developed-by: Alex Gaynor <alex.gaynor@gmail.com> Signed-off-by: Alex Gaynor <alex.gaynor@gmail.com> Co-developed-by: Finn Behrens <me@kloenk.de> Signed-off-by: Finn Behrens <me@kloenk.de> Co-developed-by: Adam Bratschi-Kaye <ark.email@gmail.com> Signed-off-by: Adam Bratschi-Kaye <ark.email@gmail.com> Co-developed-by: Wedson Almeida Filho <wedsonaf@google.com> Signed-off-by: Wedson Almeida Filho <wedsonaf@google.com> Co-developed-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Co-developed-by: Sven Van Asbroeck <thesven73@gmail.com> Signed-off-by: Sven Van Asbroeck <thesven73@gmail.com> Co-developed-by: Gary Guo <gary@garyguo.net> Signed-off-by: Gary Guo <gary@garyguo.net> Co-developed-by: Boris-Chengbiao Zhou <bobo1239@web.de> Signed-off-by: Boris-Chengbiao Zhou <bobo1239@web.de> Co-developed-by: Boqun Feng <boqun.feng@gmail.com> Signed-off-by: Boqun Feng <boqun.feng@gmail.com> Co-developed-by: Douglas Su <d0u9.su@outlook.com> Signed-off-by: Douglas Su <d0u9.su@outlook.com> Co-developed-by: Dariusz Sosnowski <dsosnowski@dsosnowski.pl> Signed-off-by: Dariusz Sosnowski <dsosnowski@dsosnowski.pl> Co-developed-by: Antonio Terceiro <antonio.terceiro@linaro.org> Signed-off-by: Antonio Terceiro <antonio.terceiro@linaro.org> Co-developed-by: Daniel Xu <dxu@dxuuu.xyz> Signed-off-by: Daniel Xu <dxu@dxuuu.xyz> Co-developed-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Signed-off-by: Björn Roy Baron <bjorn3_gh@protonmail.com> Co-developed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Signed-off-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com> Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2022-04-05kbuild: Allow kernel installation packaging to override pkg-configChun-Tse Shao
Add HOSTPKG_CONFIG to allow tooling that builds the kernel to override what pkg-config and parameters are used. Signed-off-by: Chun-Tse Shao <ctshao@google.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2022-01-27ftrace: Have architectures opt-in for mcount build time sortingSteven Rostedt (Google)
First S390 complained that the sorting of the mcount sections at build time caused the kernel to crash on their architecture. Now PowerPC is complaining about it too. And also ARM64 appears to be having issues. It may be necessary to also update the relocation table for the values in the mcount table. Not only do we have to sort the table, but also update the relocations that may be applied to the items in the table. If the system is not relocatable, then it is fine to sort, but if it is, some architectures may have issues (although x86 does not as it shifts all addresses the same). Add a HAVE_BUILDTIME_MCOUNT_SORT that an architecture can set to say it is safe to do the sorting at build time. Also update the config to compile in build time sorting in the sorttable code in scripts/ to depend on CONFIG_BUILDTIME_MCOUNT_SORT. Link: https://lore.kernel.org/all/944D10DA-8200-4BA9-8D0A-3BED9AA99F82@linux.ibm.com/ Link: https://lkml.kernel.org/r/20220127153821.3bc1ac6e@gandalf.local.home Cc: Ingo Molnar <mingo@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Yinan Liu <yinan@linux.alibaba.com> Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Kees Cook <keescook@chromium.org> Reported-by: Sachin Sant <sachinp@linux.ibm.com> Reviewed-by: Mark Rutland <mark.rutland@arm.com> Tested-by: Mark Rutland <mark.rutland@arm.com> [arm64] Tested-by: Sachin Sant <sachinp@linux.ibm.com> Fixes: 72b3942a173c ("scripts: ftrace - move the sort-processing in ftrace_init") Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
2022-01-19Merge tag 'kbuild-v5.17' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add new kconfig target 'make mod2noconfig', which will be useful to speed up the build and test iteration. - Raise the minimum supported version of LLVM to 11.0.0 - Refactor certs/Makefile - Change the format of include/config/auto.conf to stop double-quoting string type CONFIG options. - Fix ARCH=sh builds in dash - Separate compression macros for general purposes (cmd_bzip2 etc.) and the ones for decompressors (cmd_bzip2_with_size etc.) - Misc Makefile cleanups * tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits) kbuild: add cmd_file_size arch: decompressor: remove useless vmlinux.bin.all-y kbuild: rename cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22} kbuild: drop $(size_append) from cmd_zstd sh: rename suffix-y to suffix_y doc: kbuild: fix default in `imply` table microblaze: use built-in function to get CPU_{MAJOR,MINOR,REV} certs: move scripts/extract-cert to certs/ kbuild: do not quote string values in include/config/auto.conf kbuild: do not include include/config/auto.conf from shell scripts certs: simplify $(srctree)/ handling and remove config_filename macro kbuild: stop using config_filename in scripts/Makefile.modsign certs: remove misleading comments about GCC PR certs: refactor file cleaning certs: remove unneeded -I$(srctree) option for system_certificates.o certs: unify duplicated cmd_extract_certs and improve the log certs: use $< and $@ to simplify the key generation rule kbuild: remove headers_check stub kbuild: move headers_check.pl to usr/include/ certs: use if_changed to re-generate the key when the key type is changed ...
2022-01-13scripts: ftrace - move the sort-processing in ftrace_initYinan Liu
When the kernel starts, the initialization of ftrace takes up a portion of the time (approximately 6~8ms) to sort mcount addresses. We can save this time by moving mcount-sorting to compile time. Link: https://lkml.kernel.org/r/20211212113358.34208-2-yinan@linux.alibaba.com Signed-off-by: Yinan Liu <yinan@linux.alibaba.com> Reported-by: kernel test robot <lkp@intel.com> Reported-by: kernel test robot <oliver.sang@intel.com> Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
2022-01-08certs: move scripts/extract-cert to certs/Masahiro Yamada
extract-cert is only used in certs/Makefile. Move it there and build extract-cert on demand. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-04-26Merge tag 'keys-cve-2020-26541-v3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull x509 dbx/mokx UEFI support from David Howells: "Here's a set of patches from Eric Snowberg[1] that add support for EFI_CERT_X509_GUID entries in the dbx and mokx UEFI tables (such entries cause matching certificates to be rejected). These are currently ignored and only the hash entries are made use of. Additionally Eric included his patches to allow such certificates to be preloaded. These patches deal with CVE-2020-26541. To quote Eric: 'This is the fifth patch series for adding support for EFI_CERT_X509_GUID entries [2]. It has been expanded to not only include dbx entries but also entries in the mokx. Additionally my series to preload these certificate [3] has also been included'" Link: https://lore.kernel.org/r/20210122181054.32635-1-eric.snowberg@oracle.com [1] Link: https://patchwork.kernel.org/project/linux-security-module/patch/20200916004927.64276-1-eric.snowberg@oracle.com/ [2] Link: https://lore.kernel.org/patchwork/cover/1315485/ [3] * tag 'keys-cve-2020-26541-v3' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: integrity: Load mokx variables into the blacklist keyring certs: Add ability to preload revocation certs certs: Move load_system_certificate_list to a common function certs: Add EFI_CERT_X509_GUID support for dbx entries
2021-03-11certs: Add ability to preload revocation certsEric Snowberg
Add a new Kconfig option called SYSTEM_REVOCATION_KEYS. If set, this option should be the filename of a PEM-formated file containing X.509 certificates to be included in the default blacklist keyring. DH Changes: - Make the new Kconfig option depend on SYSTEM_REVOCATION_LIST. - Fix SYSTEM_REVOCATION_KEYS=n, but CONFIG_SYSTEM_REVOCATION_LIST=y[1][2]. - Use CONFIG_SYSTEM_REVOCATION_LIST for extract-cert[3]. - Use CONFIG_SYSTEM_REVOCATION_LIST for revocation_certificates.o[3]. Signed-off-by: Eric Snowberg <eric.snowberg@oracle.com> Acked-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: David Howells <dhowells@redhat.com> cc: Randy Dunlap <rdunlap@infradead.org> cc: keyrings@vger.kernel.org Link: https://lore.kernel.org/r/e1c15c74-82ce-3a69-44de-a33af9b320ea@infradead.org/ [1] Link: https://lore.kernel.org/r/20210303034418.106762-1-eric.snowberg@oracle.com/ [2] Link: https://lore.kernel.org/r/20210304175030.184131-1-eric.snowberg@oracle.com/ [3] Link: https://lore.kernel.org/r/20200930201508.35113-3-eric.snowberg@oracle.com/ Link: https://lore.kernel.org/r/20210122181054.32635-4-eric.snowberg@oracle.com/ # v5 Link: https://lore.kernel.org/r/161428673564.677100.4112098280028451629.stgit@warthog.procyon.org.uk/ Link: https://lore.kernel.org/r/161433312452.902181.4146169951896577982.stgit@warthog.procyon.org.uk/ # v2 Link: https://lore.kernel.org/r/161529606657.163428.3340689182456495390.stgit@warthog.procyon.org.uk/ # v3
2021-02-15scripts: set proper OpenSSL include dir also for sign-fileRolf Eike Beer
Fixes: 2cea4a7a1885 ("scripts: use pkg-config to locate libcrypto") Signed-off-by: Rolf Eike Beer <eb@emlix.com> Cc: stable@vger.kernel.org # 5.6.x Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-01-28scripts: use pkg-config to locate libcryptoRolf Eike Beer
Otherwise build fails if the headers are not in the default location. While at it also ask pkg-config for the libs, with fallback to the existing value. Signed-off-by: Rolf Eike Beer <eb@emlix.com> Cc: stable@vger.kernel.org # 5.6.x Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-09-25kbuild: preprocess module linker scriptMasahiro Yamada
There was a request to preprocess the module linker script like we do for the vmlinux one. (https://lkml.org/lkml/2020/8/21/512) The difference between vmlinux.lds and module.lds is that the latter is needed for external module builds, thus must be cleaned up by 'make mrproper' instead of 'make clean'. Also, it must be created by 'make modules_prepare'. You cannot put it in arch/$(SRCARCH)/kernel/, which is cleaned up by 'make clean'. I moved arch/$(SRCARCH)/kernel/module.lds to arch/$(SRCARCH)/include/asm/module.lds.h, which is included from scripts/module.lds.S. scripts/module.lds is fine because 'make clean' keeps all the build artifacts under scripts/. You can add arch-specific sections in <asm/module.lds.h>. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: Jessica Yu <jeyu@kernel.org> Acked-by: Will Deacon <will@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Acked-by: Jessica Yu <jeyu@kernel.org>
2020-08-10kbuild: introduce hostprogs-always-y and userprogs-always-yMasahiro Yamada
To build host programs, you need to add the program names to 'hostprogs' to use the necessary build rule, but it is not enough to build them because there is no dependency. There are two types of host programs: built as the prerequisite of another (e.g. gen_crc32table in lib/Makefile), or always built when Kbuild visits the Makefile (e.g. genksyms in scripts/genksyms/Makefile). The latter is typical in Makefiles under scripts/, which contains host programs globally used during the kernel build. To build them, you need to add them to both 'hostprogs' and 'always-y'. This commit adds hostprogs-always-y as a shorthand. The same applies to user programs. net/bpfilter/Makefile builds bpfilter_umh on demand, hence always-y is unneeded. In contrast, programs under samples/ are added to both 'userprogs' and 'always-y' so they are always built when Kbuild visits the Makefiles. userprogs-always-y works as a shorthand. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
2020-04-09kbuild: remove -I$(srctree)/tools/include from scripts/MakefileMasahiro Yamada
I do not like to add an extra include path for every tool with no good reason. This should be specified per file. This line was added by commit 6520fe5564ac ("x86, realmode: 16-bit real-mode code support for relocs tool"), which did not touch anything else in scripts/. I see no reason to add this. Also, remove the comment about kallsyms because we do not have any for the rest of programs. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-02-04kbuild: rename hostprogs-y/always to hostprogs/always-yMasahiro Yamada
In old days, the "host-progs" syntax was used for specifying host programs. It was renamed to the current "hostprogs-y" in 2004. It is typically useful in scripts/Makefile because it allows Kbuild to selectively compile host programs based on the kernel configuration. This commit renames like follows: always -> always-y hostprogs-y -> hostprogs So, scripts/Makefile will look like this: always-$(CONFIG_BUILD_BIN2C) += ... always-$(CONFIG_KALLSYMS) += ... ... hostprogs := $(always-y) $(always-m) I think this makes more sense because a host program is always a host program, irrespective of the kernel configuration. We want to specify which ones to compile by CONFIG options, so always-y will be handier. The "always", "hostprogs-y", "hostprogs-m" will be kept for backward compatibility for a while. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-01-29Merge tag 'tty-5.6-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver updates from Greg KH: "Here are the big set of tty and serial driver updates for 5.6-rc1 Included in here are: - dummy_con cleanups (touches lots of arch code) - sysrq logic cleanups (touches lots of serial drivers) - samsung driver fixes (wasn't really being built) - conmakeshash move to tty subdir out of scripts - lots of small tty/serial driver updates All of these have been in linux-next for a while with no reported issues" * tag 'tty-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (140 commits) tty: n_hdlc: Use flexible-array member and struct_size() helper tty: baudrate: SPARC supports few more baud rates tty: baudrate: Synchronise baud_table[] and baud_bits[] tty: serial: meson_uart: Add support for kernel debugger serial: imx: fix a race condition in receive path serial: 8250_bcm2835aux: Document struct bcm2835aux_data serial: 8250_bcm2835aux: Use generic remapping code serial: 8250_bcm2835aux: Allocate uart_8250_port on stack serial: 8250_bcm2835aux: Suppress register_port error on -EPROBE_DEFER serial: 8250_bcm2835aux: Suppress clk_get error on -EPROBE_DEFER serial: 8250_bcm2835aux: Fix line mismatch on driver unbind serial_core: Remove unused member in uart_port vt: Correct comment documenting do_take_over_console() vt: Delete comment referencing non-existent unbind_con_driver() arch/xtensa/setup: Drop dummy_con initialization arch/x86/setup: Drop dummy_con initialization arch/unicore32/setup: Drop dummy_con initialization arch/sparc/setup: Drop dummy_con initialization arch/sh/setup: Drop dummy_con initialization arch/s390/setup: Drop dummy_con initialization ...
2019-12-17tty: vt: move conmakehash to drivers/tty/vt/ from scripts/Masahiro Yamada
scripts/conmakehash is only used for generating drivers/tty/vt/consolemap_deftbl.c Move it to the related directory. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Link: https://lore.kernel.org/r/20191217110633.8796-1-masahiroy@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-13scripts/sorttable: Implement build-time ORC unwind table sortingShile Zhang
The ORC unwinder has two tables: .orc_unwind_ip and .orc_unwind, which need to be sorted for binary search. Previously this sorting was done during bootup. Sort them at build time to speed up booting. Add the ORC tables sorting in a parallel build process to speed up the build. [ mingo: Rewrote the changelog and fixed some comments. ] Suggested-by: Andy Lutomirski <luto@amacapital.net> Suggested-by: Peter Zijlstra <peterz@infradead.org> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: linux-kbuild@vger.kernel.org Link: https://lkml.kernel.org/r/20191204004633.88660-7-shile.zhang@linux.alibaba.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-12-13scripts/sorttable: Rename 'sortextable' to 'sorttable'Shile Zhang
Use a more generic name for additional table sorting usecases, such as the upcoming ORC table sorting feature. This tool is not tied to exception table sorting anymore. No functional changes intended. [ mingo: Rewrote the changelog. ] Signed-off-by: Shile Zhang <shile.zhang@linux.alibaba.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: linux-kbuild@vger.kernel.org Link: https://lkml.kernel.org/r/20191204004633.88660-6-shile.zhang@linux.alibaba.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2019-11-11video/logo: move pnmtologo tool to drivers/video/logo/ from scripts/Masahiro Yamada
This tool is only used by drivers/video/logo/Makefile. No reason to keep it in scripts/. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-09-27Merge branch 'next-integrity' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity Pull integrity updates from Mimi Zohar: "The major feature in this time is IMA support for measuring and appraising appended file signatures. In addition are a couple of bug fixes and code cleanup to use struct_size(). In addition to the PE/COFF and IMA xattr signatures, the kexec kernel image may be signed with an appended signature, using the same scripts/sign-file tool that is used to sign kernel modules. Similarly, the initramfs may contain an appended signature. This contained a lot of refactoring of the existing appended signature verification code, so that IMA could retain the existing framework of calculating the file hash once, storing it in the IMA measurement list and extending the TPM, verifying the file's integrity based on a file hash or signature (eg. xattrs), and adding an audit record containing the file hash, all based on policy. (The IMA support for appended signatures patch set was posted and reviewed 11 times.) The support for appended signature paves the way for adding other signature verification methods, such as fs-verity, based on a single system-wide policy. The file hash used for verifying the signature and the signature, itself, can be included in the IMA measurement list" * 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: ima_api: Use struct_size() in kzalloc() ima: use struct_size() in kzalloc() sefltest/ima: support appended signatures (modsig) ima: Fix use after free in ima_read_modsig() MODSIGN: make new include file self contained ima: fix freeing ongoing ahash_request ima: always return negative code for error ima: Store the measurement again when appraising a modsig ima: Define ima-modsig template ima: Collect modsig ima: Implement support for module-style appended signatures ima: Factor xattr_verify() out of ima_appraise_measurement() ima: Add modsig appraise_type option for module-style appended signatures integrity: Select CONFIG_KEYS instead of depending on it PKCS#7: Introduce pkcs7_get_digest() PKCS#7: Refactor verify_pkcs7_signature() MODSIGN: Export module signature definitions ima: initialize the "template" field with the default template
2019-08-25kbuild: pkg: clean up package files/dirs from the top MakefileMasahiro Yamada
I am not a big fan of the $(objtree)/ hack for clean-files/clean-dirs. These are created in the top of $(objtree), so let's clean them up from the top Makefile. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-08-05MODSIGN: Export module signature definitionsThiago Jung Bauermann
IMA will use the module_signature format for append signatures, so export the relevant definitions and factor out the code which verifies that the appended signature trailer is valid. Also, create a CONFIG_MODULE_SIG_FORMAT option so that IMA can select it and be able to use mod_check_sig() without having to depend on either CONFIG_MODULE_SIG or CONFIG_MODULES. s390 duplicated the definition of struct module_signature so now they can use the new <linux/module_signature.h> header instead. Signed-off-by: Thiago Jung Bauermann <bauerman@linux.ibm.com> Acked-by: Jessica Yu <jeyu@kernel.org> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2019-06-15kbuild: remove build_unifdef target in scripts/MakefileMasahiro Yamada
Since commit 2aedcd098a94 ("kbuild: suppress annoying "... is up to date." message"), if_changed and friends nicely suppress "is up to date" messages. We do not need per-Makefile tricks. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2019-02-27scripts/gdb: do not descend into scripts/gdb from scriptsMasahiro Yamada
Currently, Kbuild descends from scripts/Makefile to scripts/gdb/Makefile just for creating symbolic links, but it does not need to do it so early. Merge the two descending paths to simplify the code. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
2018-12-01kbuild: descend into scripts/gcc-plugins/ via scripts/MakefileMasahiro Yamada
Now that 'archprepare' depends on 'scripts', Kbuild can descend into scripts/gcc-plugins in a more standard way. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Kees Cook <keescook@chromium.org>
2018-12-01kbuild: move modpost out of 'scripts' targetMasahiro Yamada
I am eagar to build under the scripts/ directory only with $(HOSTCC), but scripts/mod/ highly depends on the $(CC) and target arch headers. That it why the 'scripts' target must depend on 'asm-generic', 'gcc-plugins', and $(autoksyms_h). Move it to the 'prepare0' stage. I know this is a cheesy workaround, but better than the current situation. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-10-02kbuild: consolidate Devicetree dtb build rulesRob Herring
There is nothing arch specific about building dtb files other than their location under /arch/*/boot/dts/. Keeping each arch aligned is a pain. The dependencies and supported targets are all slightly different. Also, a cross-compiler for each arch is needed, but really the host compiler preprocessor is perfectly fine for building dtbs. Move the build rules to a common location and remove the arch specific ones. This is done in a single step to avoid warnings about overriding rules. The build dependencies had been a mixture of 'scripts' and/or 'prepare'. These pull in several dependencies some of which need a target compiler (specifically devicetable-offsets.h) and aren't needed to build dtbs. All that is really needed is dtc, so adjust the dependencies to only be dtc. This change enables support 'dtbs_install' on some arches which were missing the target. Acked-by: Will Deacon <will.deacon@arm.com> Acked-by: Paul Burton <paul.burton@mips.com> Acked-by: Ley Foon Tan <ley.foon.tan@intel.com> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Cc: Michal Marek <michal.lkml@markovi.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: James Hogan <jhogan@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Chris Zankel <chris@zankel.net> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: linux-kbuild@vger.kernel.org Cc: linux-snps-arc@lists.infradead.org Cc: linux-arm-kernel@lists.infradead.org Cc: uclinux-h8-devel@lists.sourceforge.jp Cc: linux-mips@linux-mips.org Cc: nios2-dev@lists.rocketboards.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-xtensa@linux-xtensa.org Signed-off-by: Rob Herring <robh@kernel.org>
2018-07-18kbuild: Rename HOST_LOADLIBES to KBUILD_HOSTLDLIBSLaura Abbott
In preparation for enabling command line LDLIBS, re-name HOST_LOADLIBES to KBUILD_HOSTLDLIBS as the internal use only flags. Also rename existing usage to HOSTLDLIBS for consistency. This should not have any visible effects. Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2018-07-18kbuild: move bin2c back to scripts/ from scripts/basic/Masahiro Yamada
Commit 8370edea81e3 ("bin2c: move bin2c in scripts/basic") moved bin2c to the scripts/basic/ directory, incorrectly stating "Kexec wants to use bin2c and it wants to use it really early in the build process. See arch/x86/purgatory/ code in later patches." Commit bdab125c9301 ("Revert "kexec/purgatory: Add clean-up for purgatory directory"") and commit d6605b6bbee8 ("x86/build: Remove unnecessary preparation for purgatory") removed the redundant purgatory build magic entirely. That means that the move of bin2c was unnecessary in the first place. fixdep is the only host program that deserves to sit in the scripts/basic/ directory. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-23Docs: clean up some DocBook loose endsJonathan Corbet
There were a few bits and pieces left over from the now-disused DocBook toolchain; git rid of them. Reported-by: Markus Heiser <markus.heiser@darmarit.de> Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2017-05-16docs: remove DocBook from the building systemMauro Carvalho Chehab
Now that we don't have any DocBook anymore, remove it from the building system. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2016-06-07GCC plugin infrastructureEmese Revfy
This patch allows to build the whole kernel with GCC plugins. It was ported from grsecurity/PaX. The infrastructure supports building out-of-tree modules and building in a separate directory. Cross-compilation is supported too. Currently the x86, arm, arm64 and uml architectures enable plugins. The directory of the gcc plugins is scripts/gcc-plugins. You can use a file or a directory there. The plugins compile with these options: * -fno-rtti: gcc is compiled with this option so the plugins must use it too * -fno-exceptions: this is inherited from gcc too * -fasynchronous-unwind-tables: this is inherited from gcc too * -ggdb: it is useful for debugging a plugin (better backtrace on internal errors) * -Wno-narrowing: to suppress warnings from gcc headers (ipa-utils.h) * -Wno-unused-variable: to suppress warnings from gcc headers (gcc_version variable, plugin-version.h) The infrastructure introduces a new Makefile target called gcc-plugins. It supports all gcc versions from 4.5 to 6.0. The scripts/gcc-plugin.sh script chooses the proper host compiler (gcc-4.7 can be built by either gcc or g++). This script also checks the availability of the included headers in scripts/gcc-plugins/gcc-common.h. The gcc-common.h header contains frequently included headers for GCC plugins and it has a compatibility layer for the supported gcc versions. The gcc-generate-*-pass.h headers automatically generate the registration structures for GIMPLE, SIMPLE_IPA, IPA and RTL passes. Note that 'make clean' keeps the *.so files (only the distclean or mrproper targets clean all) because they are needed for out-of-tree modules. Based on work created by the PaX Team. Signed-off-by: Emese Revfy <re.emese@gmail.com> Acked-by: Kees Cook <keescook@chromium.org> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-02-26KEYS: Reserve an extra certificate symbol for inserting without recompilingMehmet Kayaalp
Place a system_extra_cert buffer of configurable size, right after the system_certificate_list, so that inserted keys can be readily processed by the existing mechanism. Added script takes a key file and a kernel image and inserts its contents to the reserved area. The system_certificate_list_size is also adjusted accordingly. Call the script as: scripts/insert-sys-cert -b <vmlinux> -c <certfile> If vmlinux has no symbol table, supply System.map file with -s flag. Subsequent runs replace the previously inserted key, instead of appending the new one. Signed-off-by: Mehmet Kayaalp <mkayaalp@linux.vnet.ibm.com> Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com>
2015-09-28DocBook: Use a fixed encoding for outputBen Hutchings
Currently the encoding of documents generated by DocBook depends on the current locale. Make the output reproducible independently of the locale, by setting the encoding to UTF-8 (LC_CTYPE=C.UTF-8) by preference, or ASCII (LC_CTYPE=C) as a fallback. LC_CTYPE can normally be overridden by LC_ALL, but the top-level Makefile unsets that. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> [jc: added check-lc_ctype to .gitignore] Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2015-08-12modsign: Use extract-cert to process CONFIG_SYSTEM_TRUSTED_KEYSDavid Woodhouse
Fix up the dependencies somewhat too, while we're at it. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David Howells <dhowells@redhat.com>
2015-08-07modsign: Extract signing cert from CONFIG_MODULE_SIG_KEY if neededDavid Woodhouse
Where an external PEM file or PKCS#11 URI is given, we can get the cert from it for ourselves instead of making the user drop signing_key.x509 in place for us. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David Howells <dhowells@redhat.com>
2015-08-07MODSIGN: Use PKCS#7 messages as module signaturesDavid Howells
Move to using PKCS#7 messages as module signatures because: (1) We have to be able to support the use of X.509 certificates that don't have a subjKeyId set. We're currently relying on this to look up the X.509 certificate in the trusted keyring list. (2) PKCS#7 message signed information blocks have a field that supplies the data required to match with the X.509 certificate that signed it. (3) The PKCS#7 certificate carries fields that specify the digest algorithm used to generate the signature in a standardised way and the X.509 certificates specify the public key algorithm in a standardised way - so we don't need our own methods of specifying these. (4) We now have PKCS#7 message support in the kernel for signed kexec purposes and we can make use of this. To make this work, the old sign-file script has been replaced with a program that needs compiling in a previous patch. The rules to build it are added here. Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Vivek Goyal <vgoyal@redhat.com>
2015-02-17scripts/gdb: add infrastructureJan Kiszka
This provides the basic infrastructure to load kernel-specific python helper scripts when debugging the kernel in gdb. The loading mechanism is based on gdb loading for <objfile>-gdb.py when opening <objfile>. Therefore, this places a corresponding link to the main helper script into the output directory that contains vmlinux. The main scripts will pull in submodules containing Linux specific gdb commands and functions. To avoid polluting the source directory with compiled python modules, we link to them from the object directory. Due to gdb.parse_and_eval and string redirection for gdb.execute, we depend on gdb >= 7.2. This feature is enabled via CONFIG_GDB_SCRIPTS. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Michal Marek <mmarek@suse.cz> [kbuild stuff] Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ben Widawsky <ben@bwidawsk.net> Cc: Borislav Petkov <bp@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-08bin2c: move bin2c in scripts/basicVivek Goyal
This patch series does not do kernel signature verification yet. I plan to post another patch series for that. Now distributions are already signing PE/COFF bzImage with PKCS7 signature I plan to parse and verify those signatures. Primary goal of this patchset is to prepare groundwork so that kernel image can be signed and signatures be verified during kexec load. This should help with two things. - It should allow kexec/kdump on secureboot enabled machines. - In general it can help even without secureboot. By being able to verify kernel image signature in kexec, it should help with avoiding module signing restrictions. Matthew Garret showed how to boot into a custom kernel, modify first kernel's memory and then jump back to old kernel and bypass any policy one wants to. This patch (of 15): Kexec wants to use bin2c and it wants to use it really early in the build process. See arch/x86/purgatory/ code in later patches. So move bin2c in scripts/basic so that it can be built very early and be usable by arch/x86/purgatory/ Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Cc: Borislav Petkov <bp@suse.de> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Eric Biederman <ebiederm@xmission.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Greg Kroah-Hartman <greg@kroah.com> Cc: Dave Young <dyoung@redhat.com> Cc: WANG Chao <chaowang@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-09kbuild: do not add "selinux" to subdir- twiceMasahiro Yamada
scripts/Makefile adds "selinux" to subdir-y or subdir- twice. subdir-$(CONFIG_MODVERSIONS) += genksyms subdir-y += mod subdir-$(CONFIG_SECURITY_SELINUX) += selinux <--- here subdir-$(CONFIG_DTC) += dtc # Let clean descend into subdirs subdir- += basic kconfig package selinux <--- again The latter is redundant. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> Signed-off-by: Michal Marek <mmarek@suse.cz>