| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc updates from Greg KH:
"Here is the big set of char/misc and other small driver subsystem
changes for 6.7-rc1. Included in here are:
- IIO subsystem driver updates and additions (largest part of this
pull request)
- FPGA subsystem driver updates
- Counter subsystem driver updates
- ICC subsystem driver updates
- extcon subsystem driver updates
- mei driver updates and additions
- nvmem subsystem driver updates and additions
- comedi subsystem dependency fixes
- parport driver fixups
- cdx subsystem driver and core updates
- splice support for /dev/zero and /dev/full
- other smaller driver cleanups
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (326 commits)
cdx: add sysfs for subsystem, class and revision
cdx: add sysfs for bus reset
cdx: add support for bus enable and disable
cdx: Register cdx bus as a device on cdx subsystem
cdx: Create symbol namespaces for cdx subsystem
cdx: Introduce lock to protect controller ops
cdx: Remove cdx controller list from cdx bus system
dts: ti: k3-am625-beagleplay: Add beaglecc1352
greybus: Add BeaglePlay Linux Driver
dt-bindings: net: Add ti,cc1352p7
dt-bindings: eeprom: at24: allow NVMEM cells based on old syntax
dt-bindings: nvmem: SID: allow NVMEM cells based on old syntax
Revert "nvmem: add new config option"
MAINTAINERS: coresight: Add missing Coresight files
misc: pci_endpoint_test: Add deviceID for J721S2 PCIe EP device support
firmware: xilinx: Move EXPORT_SYMBOL_GPL next to zynqmp_pm_feature definition
uacce: make uacce_class constant
ocxl: make ocxl_class constant
cxl: make cxl_class constant
misc: phantom: make phantom_class constant
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools
Pull perf tools updates from Namhyung Kim:
"Build:
- Compile BPF programs by default if clang (>= 12.0.1) is available
to enable more features like kernel lock contention, off-cpu
profiling, kwork, sample filtering and so on.
This can be disabled by passing BUILD_BPF_SKEL=0 to make.
- Produce better error messages for bison on debug build (make
DEBUG=1) by defining YYDEBUG symbol internally.
perf record:
- Track sideband events (like FORK/MMAP) from all CPUs even if perf
record targets a subset of CPUs only (using -C option). Otherwise
it may lose some information happened on a CPU out of the target
list.
- Fix checking raw sched_switch tracepoint argument using system BTF.
This affects off-cpu profiling which attaches a BPF program to the
raw tracepoint.
perf lock contention:
- Add --lock-cgroup option to see contention by cgroups. This should
be used with BPF only (using -b option).
$ sudo perf lock con -ab --lock-cgroup -- sleep 1
contended total wait max wait avg wait cgroup
835 14.06 ms 41.19 us 16.83 us /system.slice/led.service
25 122.38 us 13.77 us 4.89 us /
44 23.73 us 3.87 us 539 ns /user.slice/user-657345.slice/session-c4.scope
1 491 ns 491 ns 491 ns /system.slice/connectd.service
- Add -G/--cgroup-filter option to see contention only for given
cgroups.
This can be useful when you identified a cgroup in the above
command and want to investigate more on it. It also works with
other output options like -t/--threads and -l/--lock-addr.
$ sudo perf lock con -ab -G /user.slice/user-657345.slice/session-c4.scope -- sleep 1
contended total wait max wait avg wait type caller
8 77.11 us 17.98 us 9.64 us spinlock futex_wake+0xc8
2 24.56 us 14.66 us 12.28 us spinlock tick_do_update_jiffies64+0x25
1 4.97 us 4.97 us 4.97 us spinlock futex_q_lock+0x2a
- Use per-cpu array for better spinlock tracking. This is to improve
performance of the BPF program and to avoid nested contention on a
lock in the BPF hash map.
- Update callstack check for PowerPC. To find a representative caller
of a lock, it needs to look up the call stacks. It ends the lookup
when it sees 0 in the call stack buffer. However, PowerPC call
stacks can have 0 values in the beginning so skip them when it
expects valid call stacks after.
perf kwork:
- Support 'sched' class (for -k option) so that it can see task
scheduling event (using sched_switch tracepoint) as well as irq and
workqueue items.
- Add perf kwork top subcommand to show more accurate cpu utilization
with sched class above. It works both with a recorded data (using
perf kwork record command) and BPF (using -b option). Unlike perf
top command, it does not support interactive mode (yet).
$ sudo perf kwork top -b -k sched
Starting trace, Hit <Ctrl+C> to stop and report
^C
Total : 160702.425 ms, 8 cpus
%Cpu(s): 36.00% id, 0.00% hi, 0.00% si
%Cpu0 [|||||||||||||||||| 61.66%]
%Cpu1 [|||||||||||||||||| 61.27%]
%Cpu2 [||||||||||||||||||| 66.40%]
%Cpu3 [|||||||||||||||||| 61.28%]
%Cpu4 [|||||||||||||||||| 61.82%]
%Cpu5 [||||||||||||||||||||||| 77.41%]
%Cpu6 [|||||||||||||||||| 61.73%]
%Cpu7 [|||||||||||||||||| 63.25%]
PID SPID %CPU RUNTIME COMMMAND
-------------------------------------------------------------
0 0 38.72 8089.463 ms [swapper/1]
0 0 38.71 8084.547 ms [swapper/3]
0 0 38.33 8007.532 ms [swapper/0]
0 0 38.26 7992.985 ms [swapper/6]
0 0 38.17 7971.865 ms [swapper/4]
0 0 36.74 7447.765 ms [swapper/7]
0 0 33.59 6486.942 ms [swapper/2]
0 0 22.58 3771.268 ms [swapper/5]
9545 9351 2.48 447.136 ms sched-messaging
9574 9351 2.09 418.583 ms sched-messaging
9724 9351 2.05 372.407 ms sched-messaging
9531 9351 2.01 368.804 ms sched-messaging
9512 9351 2.00 362.250 ms sched-messaging
9514 9351 1.95 357.767 ms sched-messaging
9538 9351 1.86 384.476 ms sched-messaging
9712 9351 1.84 386.490 ms sched-messaging
9723 9351 1.83 380.021 ms sched-messaging
9722 9351 1.82 382.738 ms sched-messaging
9517 9351 1.81 354.794 ms sched-messaging
9559 9351 1.79 344.305 ms sched-messaging
9725 9351 1.77 365.315 ms sched-messaging
<SNIP>
- Add hard/soft-irq statistics to perf kwork top. This will show the
total CPU utilization with IRQ stats like below:
$ sudo perf kwork top -b -k sched,irq,softirq
Starting trace, Hit <Ctrl+C> to stop and report
^C
Total : 12554.889 ms, 8 cpus
%Cpu(s): 96.23% id, 0.10% hi, 0.19% si <---- here
%Cpu0 [| 4.60%]
%Cpu1 [| 4.59%]
%Cpu2 [ 2.73%]
%Cpu3 [| 3.81%]
<SNIP>
perf bench:
- Add -G/--cgroups option to perf bench sched pipe. The pipe bench is
good to measure context switch overhead. With this option, it puts
the reader and writer tasks in separate cgroups to enforce context
switch between two different cgroups.
Also it needs to set CPU affinity of the tasks in a CPU to
accurately measure the impact of cgroup context switches.
$ sudo perf stat -e context-switches,cgroup-switches -- \
> taskset -c 0 perf bench sched pipe -l 100000
# Running 'sched/pipe' benchmark:
# Executed 100000 pipe operations between two processes
Total time: 0.307 [sec]
3.078180 usecs/op
324867 ops/sec
Performance counter stats for 'taskset -c 0 perf bench sched pipe -l 100000':
200,026 context-switches
63 cgroup-switches
0.321637922 seconds time elapsed
You can see small number of cgroup-switches because both write and
read tasks are in the same cgroup.
$ sudo mkdir /sys/fs/cgroup/{AAA,BBB}
$ sudo perf stat -e context-switches,cgroup-switches -- \
> taskset -c 0 perf bench sched pipe -l 100000 -G AAA,BBB
# Running 'sched/pipe' benchmark:
# Executed 100000 pipe operations between two processes
Total time: 0.351 [sec]
3.512990 usecs/op
284657 ops/sec
Performance counter stats for 'taskset -c 0 perf bench sched pipe -l 100000 -G AAA,BBB':
200,020 context-switches
200,019 cgroup-switches
0.365034567 seconds time elapsed
Now context-switches and cgroup-switches are almost same. And you
can see the pipe operation took little more.
- Kill child processes when perf bench sched messaging exited
abnormally. Otherwise it'd leave the child doing unnecessary work.
perf test:
- Fix various shellcheck issues on the tests written in shell script.
- Skip tests when condition is not satisfied:
- object code reading test for non-text section addresses.
- CoreSight test if cs_etm// event is not available.
- lock contention test if not enough CPUs.
Event parsing:
- Make PMU alias name loading lazy to reduce the startup time in the
event parsing code for perf record, stat and others in the general
case.
- Lazily compute PMU default config. In the same sense, delay PMU
initialization until it's really needed to reduce the startup cost.
- Fix event term values that are raw events. The event specification
can have several terms including event name. But sometimes it
clashes with raw event encoding which starts with 'r' and has
hex-digits.
For example, an event named 'read' should be processed as a normal
event but it was mis-treated as a raw encoding and caused a
failure.
$ perf stat -e 'uncore_imc_free_running/event=read/' -a sleep 1
event syntax error: '..nning/event=read/'
\___ parser error
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Event metrics:
- Add "Compat" regex to match event with multiple identifiers.
- Usual updates for Intel, Power10, Arm telemetry/CMN and AmpereOne.
Misc:
- Assorted memory leak fixes and footprint reduction.
- Add "bpf_skeletons" to perf version --build-options so that users
can check whether their perf tools have BPF support easily.
- Fix unaligned access in Intel-PT packet decoder found by
undefined-behavior sanitizer.
- Avoid frequency mode for the dummy event. Surprisingly it'd impact
kernel timer tick handler performance by force iterating all PMU
events.
- Update bash shell completion for events and metrics"
* tag 'perf-tools-for-v6.7-1-2023-11-01' of git://git.kernel.org/pub/scm/linux/kernel/git/perf/perf-tools: (187 commits)
perf vendor events intel: Update tsx_cycles_per_elision metrics
perf vendor events intel: Update bonnell version number to v5
perf vendor events intel: Update westmereex events to v4
perf vendor events intel: Update meteorlake events to v1.06
perf vendor events intel: Update knightslanding events to v16
perf vendor events intel: Add typo fix for ivybridge FP
perf vendor events intel: Update a spelling in haswell/haswellx
perf vendor events intel: Update emeraldrapids to v1.01
perf vendor events intel: Update alderlake/alderlake events to v1.23
perf build: Disable BPF skeletons if clang version is < 12.0.1
perf callchain: Fix spelling mistake "statisitcs" -> "statistics"
perf report: Fix spelling mistake "heirachy" -> "hierarchy"
perf python: Fix binding linkage due to rename and move of evsel__increase_rlimit()
perf tests: test_arm_coresight: Simplify source iteration
perf vendor events intel: Add tigerlake two metrics
perf vendor events intel: Add broadwellde two metrics
perf vendor events intel: Fix broadwellde tma_info_system_dram_bw_use metric
perf mem_info: Add and use map_symbol__exit and addr_map_symbol__exit
perf callchain: Minor layout changes to callchain_list
perf callchain: Make brtype_stat in callchain_list optional
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"As usual, lots of singleton and doubleton patches all over the tree
and there's little I can say which isn't in the individual changelogs.
The lengthier patch series are
- 'kdump: use generic functions to simplify crashkernel reservation
in arch', from Baoquan He. This is mainly cleanups and
consolidation of the 'crashkernel=' kernel parameter handling
- After much discussion, David Laight's 'minmax: Relax type checks in
min() and max()' is here. Hopefully reduces some typecasting and
the use of min_t() and max_t()
- A group of patches from Oleg Nesterov which clean up and slightly
fix our handling of reads from /proc/PID/task/... and which remove
task_struct.thread_group"
* tag 'mm-nonmm-stable-2023-11-02-14-08' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (64 commits)
scripts/gdb/vmalloc: disable on no-MMU
scripts/gdb: fix usage of MOD_TEXT not defined when CONFIG_MODULES=n
.mailmap: add address mapping for Tomeu Vizoso
mailmap: update email address for Claudiu Beznea
tools/testing/selftests/mm/run_vmtests.sh: lower the ptrace permissions
.mailmap: map Benjamin Poirier's address
scripts/gdb: add lx_current support for riscv
ocfs2: fix a spelling typo in comment
proc: test ProtectionKey in proc-empty-vm test
proc: fix proc-empty-vm test with vsyscall
fs/proc/base.c: remove unneeded semicolon
do_io_accounting: use sig->stats_lock
do_io_accounting: use __for_each_thread()
ocfs2: replace BUG_ON() at ocfs2_num_free_extents() with ocfs2_error()
ocfs2: fix a typo in a comment
scripts/show_delta: add __main__ judgement before main code
treewide: mark stuff as __ro_after_init
fs: ocfs2: check status values
proc: test /proc/${pid}/statm
compiler.h: move __is_constexpr() to compiler.h
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
"The only thing worth highligthing is that gzip moves to use vmalloc()
instead of kmalloc just as we had a fix for this for zstd on v6.6-rc1.
The rest is regular house keeping, keeping things neat, tidy, and
boring"
[ The kmalloc -> vmalloc conversion is not the right approach.
Unless you know you need huge areas or know you need to use virtual
mappings for some reason (playing with protection bits or whatever),
you should use kvmalloc()/kvfree, which automatically picks the right
allocation model - Linus ]
* tag 'modules-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: Annotate struct module_notes_attrs with __counted_by
module: Fix comment typo
module: Make is_valid_name() return bool
module: Make is_mapping_symbol() return bool
module/decompress: use vmalloc() for gzip decompression workspace
MAINTAINERS: add include/linux/module*.h to modules
module: Clarify documentation of module_param_call()
|
|
Pull documentation updates from Jonathan Corbet:
"The number of commits for documentation is not huge this time around,
but there are some significant changes nonetheless:
- Some more Spanish-language and Chinese translations
- The much-discussed documentation of the confidential-computing
threat model
- Powerpc and RISCV documentation move under Documentation/arch -
these complete this particular bit of documentation churn
- A large traditional-Chinese documentation update
- A new document on backporting and conflict resolution
- Some kernel-doc and Sphinx fixes
Plus the usual smattering of smaller updates and typo fixes"
* tag 'docs-6.7' of git://git.lwn.net/linux: (40 commits)
scripts/kernel-doc: Fix the regex for matching -Werror flag
docs: backporting: address feedback
Documentation: driver-api: pps: Update PPS generator documentation
speakup: Document USB support
doc: blk-ioprio: Bring the doc in line with the implementation
docs: usb: fix reference to nonexistent file in UVC Gadget
docs: doc-guide: mention 'make refcheckdocs'
Documentation: fix typo in dynamic-debug howto
scripts/kernel-doc: match -Werror flag strictly
Documentation/sphinx: Remove the repeated word "the" in comments.
docs: sparse: add SPDX-License-Identifier
docs/zh_CN: Add subsystem-apis Chinese translation
docs/zh_TW: update contents for zh_TW
docs: submitting-patches: encourage direct notifications to commenters
docs: add backporting and conflict resolution document
docs: move riscv under arch
docs: update link to powerpc/vmemmap_dedup.rst
mm/memory-hotplug: fix typo in documentation
docs: move powerpc under arch
PCI: Update the devres documentation regarding to pcim_*()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull ia64 removal and asm-generic updates from Arnd Bergmann:
- The ia64 architecture gets its well-earned retirement as planned,
now that there is one last (mostly) working release that will be
maintained as an LTS kernel.
- The architecture specific system call tables are updated for the
added map_shadow_stack() syscall and to remove references to the
long-gone sys_lookup_dcookie() syscall.
* tag 'asm-generic-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
hexagon: Remove unusable symbols from the ptrace.h uapi
asm-generic: Fix spelling of architecture
arch: Reserve map_shadow_stack() syscall number for all architectures
syscalls: Cleanup references to sys_lookup_dcookie()
Documentation: Drop or replace remaining mentions of IA64
lib/raid6: Drop IA64 support
Documentation: Drop IA64 from feature descriptions
kernel: Drop IA64 support from sig_fault handlers
arch: Remove Itanium (IA-64) architecture
|
|
The return value of is_valid_name() is true or false,
so change its type to reflect that.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
|
|
vmap_area does not exist on no-MMU, therefore the GDB scripts fail to
load:
Traceback (most recent call last):
File "<...>/vmlinux-gdb.py", line 51, in <module>
import linux.vmalloc
File "<...>/scripts/gdb/linux/vmalloc.py", line 14, in <module>
vmap_area_ptr_type = vmap_area_type.get_type().pointer()
^^^^^^^^^^^^^^^^^^^^^^^^^
File "<...>/scripts/gdb/linux/utils.py", line 28, in get_type
self._type = gdb.lookup_type(self._name)
^^^^^^^^^^^^^^^^^^^^^^^^^^^
gdb.error: No struct type named vmap_area.
To fix this, disable the command and add an informative error message if
CONFIG_MMU is not defined, following the example of lx-slabinfo.
Link: https://lkml.kernel.org/r/20231031202235.2655333-2-ben.wolsieffer@hefring.com
Fixes: 852622bf3616 ("scripts/gdb/vmalloc: add vmallocinfo support")
Signed-off-by: Ben Wolsieffer <ben.wolsieffer@hefring.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
MOD_TEXT is only defined if CONFIG_MODULES=y which lead to loading failure
of the gdb scripts when kernel is built without CONFIG_MODULES=y:
Reading symbols from vmlinux...
Traceback (most recent call last):
File "/foo/vmlinux-gdb.py", line 25, in <module>
import linux.constants
File "/foo/scripts/gdb/linux/constants.py", line 14, in <module>
LX_MOD_TEXT = gdb.parse_and_eval("MOD_TEXT")
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
gdb.error: No symbol "MOD_TEXT" in current context.
Add a conditional check on CONFIG_MODULES to fix this error.
Link: https://lkml.kernel.org/r/20231031134848.119391-1-da.gomez@samsung.com
Fixes: b4aff7513df3 ("scripts/gdb: use mem instead of core_layout to get the module address")
Signed-off-by: Clément Léger <cleger@rivosinc.com>
Tested-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Daniel Gomez <da.gomez@samsung.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Pankaj Raghav <p.raghav@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
csr_sscratch CSR holds current task_struct address when hart is in user
space. Trap handler on entry spills csr_sscratch into "tp" (x2) register
and zeroes out csr_sscratch CSR. Trap handler on exit reloads "tp" with
expected user mode value and place current task_struct address again in
csr_sscratch CSR.
This patch assumes "tp" is pointing to task_struct. If value in
csr_sscratch is numerically greater than "tp" then it assumes csr_sscratch
is correct address of current task_struct. This logic holds when
- hart is in user space, "tp" will be less than csr_sscratch.
- hart is in kernel space but not in trap handler, "tp" will be more
than csr_sscratch (csr_sscratch being equal to 0).
- hart is executing trap handler
- "tp" is still pointing to user mode but csr_sscratch contains
ptr to task_struct. Thus numerically higher.
- "tp" is pointing to task_struct but csr_sscratch now contains
either 0 or numerically smaller value (transiently holds
user mode tp)
Link: https://lkml.kernel.org/r/20231026233837.612405-1-debug@rivosinc.com
Signed-off-by: Deepak Gupta <debug@rivosinc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Tested-by: Hsieh-Tseng Shen <woodrow.shen@sifive.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Glenn Washburn <development@efficientek.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Jeff Xie <xiehuan09@gmail.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Add a kselftest to check for unprobed DT devices
- Fix address translation for some 3 address cells cases
- Refactor firmware node refcounting for AMBA bus
- Add bindings for qcom,sm4450-pdc, Qualcomm Kryo 465 CPU, and
Freescale QMC HDLC
- Add Marantec vendor prefix
- Convert qcom,pm8921-keypad, cnxt,cx92755-wdt, da9062-wdt, and
atmel,at91rm9200-wdt bindings to DT schema
- Several additionalProperties/unevaluatedProperties on child node
schemas fixes
- Drop reserved-memory bindings which now live in dtschema project
- Fix a reference to rockchip,inno-usb2phy.yaml
- Remove backlight nodes from display panel examples
- Expand example for using DT_SCHEMA_FILES
- Merge simple LVDS panel bindings to one binding doc
* tag 'devicetree-for-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (34 commits)
dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Add support for QMC HDLC
dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Add 'additionalProperties: false' in child nodes
dt-bindings: soc: fsl: cpm_qe: cpm1-scc-qmc: Fix example property name
dt-bindings: arm,coresight-cti: Add missing additionalProperties on child nodes
dt-bindings: arm,coresight-cti: Drop type for 'cpu' property
dt-bindings: soundwire: Add reference to soundwire-controller.yaml schema
dt-bindings: input: syna,rmi4: Make "additionalProperties: true" explicit
media: dt-bindings: ti,ds90ub960: Add missing type for "i2c-alias"
dt-bindings: input: qcom,pm8921-keypad: convert to YAML format
of: overlay: unittest: overlay_bad_unresolved: Spelling s/ok/okay/
of: address: Consolidate bus .map() functions
of: address: Store number of bus flag cells rather than bool
of: unittest: Add tests for address translations
of: address: Remove duplicated functions
of: address: Fix address translation when address-size is greater than 2
dt-bindings: watchdog: cnxt,cx92755-wdt: convert txt to yaml
dt-bindings: watchdog: da9062-wdt: convert txt to yaml
dt-bindings: watchdog: fsl,scu-wdt: Document imx8dl
dt-bindings: watchdog: atmel,at91rm9200-wdt: convert txt to yaml
dt-bindings: usb: rockchip,dwc3: update inno usb2 phy binding name
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
Pull workqueue rust bindings from Tejun Heo:
"Add rust bindings to allow rust code to schedule work items on
workqueues.
While the current bindings don't cover all of the workqueue API, it
provides enough for basic usage and can be expanded as needed"
* tag 'wq-for-6.7-rust-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
rust: workqueue: add examples
rust: workqueue: add `try_spawn` helper method
rust: workqueue: implement `WorkItemPointer` for pointer types
rust: workqueue: add helper for defining work_struct fields
rust: workqueue: define built-in queues
rust: workqueue: add low-level workqueue bindings
rust: sync: add `Arc::{from_raw, into_raw}`
|
|
Pull rust updates from Miguel Ojeda:
"A small one compared to the previous one in terms of features. In
terms of lines, as usual, the 'alloc' version upgrade accounts for
most of them.
Toolchain and infrastructure:
- Upgrade to Rust 1.73.0
This time around, due to how the kernel and Rust schedules have
aligned, there are two upgrades in fact. They contain the fixes for
a few issues we reported to the Rust project.
In addition, a few cleanups indicated by the upgraded compiler or
possible thanks to it. For instance, the compiler now detects
redundant explicit links.
- A couple changes to the Rust 'Makefile' so that it can be used with
toybox tools, allowing Rust to be used in the Android kernel build.
x86:
- Enable IBT if enabled in C
Documentation:
- Add "The Rust experiment" section to the Rust index page
MAINTAINERS:
- Add Maintainer Entry Profile field ('P:').
- Update our 'W:' field to point to the webpage we have been building
this year"
* tag 'rust-6.7' of https://github.com/Rust-for-Linux/linux:
docs: rust: add "The Rust experiment" section
x86: Enable IBT in Rust if enabled in C
rust: Use grep -Ev rather than relying on GNU grep
rust: Use awk instead of recent xargs
rust: upgrade to Rust 1.73.0
rust: print: use explicit link in documentation
rust: task: remove redundant explicit link
rust: kernel: remove `#[allow(clippy::new_ret_no_self)]`
MAINTAINERS: add Maintainer Entry Profile field for Rust
MAINTAINERS: update Rust webpage
rust: upgrade to Rust 1.72.1
rust: arc: add explicit `drop()` around `Box::from_raw()`
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"One of the more voluminous set of changes is for adding the new
__counted_by annotation[1] to gain run-time bounds checking of
dynamically sized arrays with UBSan.
- Add LKDTM test for stuck CPUs (Mark Rutland)
- Improve LKDTM selftest behavior under UBSan (Ricardo Cañuelo)
- Refactor more 1-element arrays into flexible arrays (Gustavo A. R.
Silva)
- Analyze and replace strlcpy and strncpy uses (Justin Stitt, Azeem
Shaikh)
- Convert group_info.usage to refcount_t (Elena Reshetova)
- Add __counted_by annotations (Kees Cook, Gustavo A. R. Silva)
- Add Kconfig fragment for basic hardening options (Kees Cook, Lukas
Bulwahn)
- Fix randstruct GCC plugin performance mode to stay in groups (Kees
Cook)
- Fix strtomem() compile-time check for small sources (Kees Cook)"
* tag 'hardening-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (56 commits)
hwmon: (acpi_power_meter) replace open-coded kmemdup_nul
reset: Annotate struct reset_control_array with __counted_by
kexec: Annotate struct crash_mem with __counted_by
virtio_console: Annotate struct port_buffer with __counted_by
ima: Add __counted_by for struct modsig and use struct_size()
MAINTAINERS: Include stackleak paths in hardening entry
string: Adjust strtomem() logic to allow for smaller sources
hardening: x86: drop reference to removed config AMD_IOMMU_V2
randstruct: Fix gcc-plugin performance mode to stay in group
mailbox: zynqmp: Annotate struct zynqmp_ipi_pdata with __counted_by
drivers: thermal: tsens: Annotate struct tsens_priv with __counted_by
irqchip/imx-intmux: Annotate struct intmux_data with __counted_by
KVM: Annotate struct kvm_irq_routing_table with __counted_by
virt: acrn: Annotate struct vm_memory_region_batch with __counted_by
hwmon: Annotate struct gsc_hwmon_platform_data with __counted_by
sparc: Annotate struct cpuinfo_tree with __counted_by
isdn: kcapi: replace deprecated strncpy with strscpy_pad
isdn: replace deprecated strncpy with strscpy
NFS/flexfiles: Annotate struct nfs4_ff_layout_segment with __counted_by
nfs41: Annotate struct nfs4_file_layout_dsaddr with __counted_by
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks
Pull RCU updates from Frederic Weisbecker:
- RCU torture, locktorture and generic torture infrastructure updates
that include various fixes, cleanups and consolidations.
Among the user visible things, ftrace dumps can now be found into
their own file, and module parameters get better documented and
reported on dumps.
- Generic and misc fixes all over the place. Some highlights:
* Hotplug handling has seen some light cleanups and comments
* An RCU barrier can now be triggered through sysfs to serialize
memory stress testing and avoid OOM
* Object information is now dumped in case of invalid callback
invocation
* Also various SRCU issues, too hard to trigger to deserve urgent
pull requests, have been fixed
- RCU documentation updates
- RCU reference scalability test minor fixes and doc improvements.
- RCU tasks minor fixes
- Stall detection updates. Introduce RCU CPU Stall notifiers that
allows a subsystem to provide informations to help debugging. Also
cure some false positive stalls.
* tag 'rcu-next-v6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/frederic/linux-dynticks: (56 commits)
srcu: Only accelerate on enqueue time
locktorture: Check the correct variable for allocation failure
srcu: Fix callbacks acceleration mishandling
rcu: Comment why callbacks migration can't wait for CPUHP_RCUTREE_PREP
rcu: Standardize explicit CPU-hotplug calls
rcu: Conditionally build CPU-hotplug teardown callbacks
rcu: Remove references to rcu_migrate_callbacks() from diagrams
rcu: Assume rcu_report_dead() is always called locally
rcu: Assume IRQS disabled from rcu_report_dead()
rcu: Use rcu_segcblist_segempty() instead of open coding it
rcu: kmemleak: Ignore kmemleak false positives when RCU-freeing objects
srcu: Fix srcu_struct node grpmask overflow on 64-bit systems
torture: Convert parse-console.sh to mktemp
rcutorture: Traverse possible cpu to set maxcpu in rcu_nocb_toggle()
rcutorture: Replace schedule_timeout*() 1-jiffy waits with HZ/20
torture: Add kvm.sh --debug-info argument
locktorture: Rename readers_bind/writers_bind to bind_readers/bind_writers
doc: Catch-up update for locktorture module parameters
locktorture: Add call_rcu_chains module parameter
locktorture: Add new module parameters to lock_torture_print_module_parms()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
"Misc fixes and cleanups:
- Fix potential MAX_NAME_LEN limit related build failures
- Fix scripts/faddr2line symbol filtering bug
- Fix scripts/faddr2line on LLVM=1
- Fix scripts/faddr2line to accept readelf output with mapping
symbols
- Minor cleanups"
* tag 'objtool-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
scripts/faddr2line: Skip over mapping symbols in output from readelf
scripts/faddr2line: Use LLVM addr2line and readelf if LLVM=1
scripts/faddr2line: Don't filter out non-function symbols from readelf
objtool: Remove max symbol name length limitation
objtool: Propagate early errors
objtool: Use 'the fallthrough' pseudo-keyword
x86/speculation, objtool: Use absolute relocations for annotations
x86/unwind/orc: Remove redundant initialization of 'mid' pointer in __orc_find()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking updates from Info Molnar:
"Futex improvements:
- Add the 'futex2' syscall ABI, which is an attempt to get away from
the multiplex syscall and adds a little room for extentions, while
lifting some limitations.
- Fix futex PI recursive rt_mutex waiter state bug
- Fix inter-process shared futexes on no-MMU systems
- Use folios instead of pages
Micro-optimizations of locking primitives:
- Improve arch_spin_value_unlocked() on asm-generic ticket spinlock
architectures, to improve lockref code generation
- Improve the x86-32 lockref_get_not_zero() main loop by adding
build-time CMPXCHG8B support detection for the relevant lockref
code, and by better interfacing the CMPXCHG8B assembly code with
the compiler
- Introduce arch_sync_try_cmpxchg() on x86 to improve
sync_try_cmpxchg() code generation. Convert some sync_cmpxchg()
users to sync_try_cmpxchg().
- Micro-optimize rcuref_put_slowpath()
Locking debuggability improvements:
- Improve CONFIG_DEBUG_RT_MUTEXES=y to have a fast-path as well
- Enforce atomicity of sched_submit_work(), which is de-facto atomic
but was un-enforced previously.
- Extend <linux/cleanup.h>'s no_free_ptr() with __must_check
semantics
- Fix ww_mutex self-tests
- Clean up const-propagation in <linux/seqlock.h> and simplify the
API-instantiation macros a bit
RT locking improvements:
- Provide the rt_mutex_*_schedule() primitives/helpers and use them
in the rtmutex code to avoid recursion vs. rtlock on the PI state.
- Add nested blocking lockdep asserts to rt_mutex_lock(),
rtlock_lock() and rwbase_read_lock()
.. plus misc fixes & cleanups"
* tag 'locking-core-2023-10-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
futex: Don't include process MM in futex key on no-MMU
locking/seqlock: Fix grammar in comment
alpha: Fix up new futex syscall numbers
locking/seqlock: Propagate 'const' pointers within read-only methods, remove forced type casts
locking/lockdep: Fix string sizing bug that triggers a format-truncation compiler-warning
locking/seqlock: Change __seqprop() to return the function pointer
locking/seqlock: Simplify SEQCOUNT_LOCKNAME()
locking/atomics: Use atomic_try_cmpxchg_release() to micro-optimize rcuref_put_slowpath()
locking/atomic, xen: Use sync_try_cmpxchg() instead of sync_cmpxchg()
locking/atomic/x86: Introduce arch_sync_try_cmpxchg()
locking/atomic: Add generic support for sync_try_cmpxchg() and its fallback
locking/seqlock: Fix typo in comment
futex/requeue: Remove unnecessary ‘NULL’ initialization from futex_proxy_trylock_atomic()
locking/local, arch: Rewrite local_add_unless() as a static inline function
locking/debug: Fix debugfs API return value checks to use IS_ERR()
locking/ww_mutex/test: Make sure we bail out instead of livelock
locking/ww_mutex/test: Fix potential workqueue corruption
locking/ww_mutex/test: Use prng instead of rng to avoid hangs at bootup
futex: Add sys_futex_requeue()
futex: Add flags2 argument to futex_requeue()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 hw mitigation updates from Borislav Petkov:
- A bunch of improvements, cleanups and fixlets to the SRSO mitigation
machinery and other, general cleanups to the hw mitigations code, by
Josh Poimboeuf
- Improve the return thunk detection by objtool as it is absolutely
important that the default return thunk is not used after returns
have been patched. Future work to detect and report this better is
pending
- Other misc cleanups and fixes
* tag 'x86_bugs_for_6.7_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/retpoline: Document some thunk handling aspects
x86/retpoline: Make sure there are no unconverted return thunks due to KCSAN
x86/callthunks: Delete unused "struct thunk_desc"
x86/vdso: Run objtool on vdso32-setup.o
objtool: Fix return thunk patching in retpolines
x86/srso: Remove unnecessary semicolon
x86/pti: Fix kernel warnings for pti= and nopti cmdline options
x86/calldepth: Rename __x86_return_skl() to call_depth_return_thunk()
x86/nospec: Refactor UNTRAIN_RET[_*]
x86/rethunk: Use SYM_CODE_START[_LOCAL]_NOALIGN macros
x86/srso: Disentangle rethunk-dependent options
x86/srso: Move retbleed IBPB check into existing 'has_microcode' code block
x86/bugs: Remove default case for fully switched enums
x86/srso: Remove 'pred_cmd' label
x86/srso: Unexport untraining functions
x86/srso: Improve i-cache locality for alias mitigation
x86/srso: Fix unret validation dependencies
x86/srso: Fix vulnerability reporting for missing microcode
x86/srso: Print mitigation for retbleed IBPB case
x86/srso: Print actual mitigation if requested mitigation isn't possible
...
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs
Pull vfs xattr updates from Christian Brauner:
"The 's_xattr' field of 'struct super_block' currently requires a
mutable table of 'struct xattr_handler' entries (although each handler
itself is const). However, no code in vfs actually modifies the
tables.
This changes the type of 's_xattr' to allow const tables, and modifies
existing file systems to move their tables to .rodata. This is
desirable because these tables contain entries with function pointers
in them; moving them to .rodata makes it considerably less likely to
be modified accidentally or maliciously at runtime"
* tag 'vfs-6.7.xattr' of gitolite.kernel.org:pub/scm/linux/kernel/git/vfs/vfs: (30 commits)
const_structs.checkpatch: add xattr_handler
net: move sockfs_xattr_handlers to .rodata
shmem: move shmem_xattr_handlers to .rodata
overlayfs: move xattr tables to .rodata
xfs: move xfs_xattr_handlers to .rodata
ubifs: move ubifs_xattr_handlers to .rodata
squashfs: move squashfs_xattr_handlers to .rodata
smb: move cifs_xattr_handlers to .rodata
reiserfs: move reiserfs_xattr_handlers to .rodata
orangefs: move orangefs_xattr_handlers to .rodata
ocfs2: move ocfs2_xattr_handlers and ocfs2_xattr_handler_map to .rodata
ntfs3: move ntfs_xattr_handlers to .rodata
nfs: move nfs4_xattr_handlers to .rodata
kernfs: move kernfs_xattr_handlers to .rodata
jfs: move jfs_xattr_handlers to .rodata
jffs2: move jffs2_xattr_handlers to .rodata
hfsplus: move hfsplus_xattr_handlers to .rodata
hfs: move hfs_xattr_handlers to .rodata
gfs2: move gfs2_xattr_handlers_max to .rodata
fuse: move fuse_xattr_handlers to .rodata
...
|
|
Swarup reported a "make htmldocs" warning:
Variable length lookbehind is experimental in regex;
marked by <-- HERE in m/(?<=^|\s)-Werror(?=$|\s)
<-- HERE / at ./scripts/kernel-doc line 188.
Akira managed to reproduce it by perl v5.34.0.
On second thought, it is not necessary to have the complicated
"lookahead and lookbehind" things, and the regex can be simplified.
Generally, the kernel-doc warnings should be considered as errors only
when "-Werror" flag is set in KCFLAGS, but not when
"-Werror=<diagnostic-type>" is set, which means there needs to be a
space or start of string before "-Werror", and a space or end of string
after "-Werror".
The following cases have been tested to work as expected:
* kernel-doc warnings are considered as errors:
$ KCFLAGS="-Werror" make W=1
$ KCFLAGS="-Wcomment -Werror" make W=1
$ KCFLAGS="-Werror -Wundef" make W=1
$ KCFLAGS="-Wcomment -Werror -Wundef" make W=1
* kernel-doc warnings remain as warnings:
$ KCFLAGS="-Werror=return-type" make W=1
$ KCFLAGS="-Wcomment -Werror=return-type" make W=1
$ KCFLAGS="-Werror=return-type -Wundef" make W=1
$ KCFLAGS="-Wcomment -Werror=return-type -Wundef" make W=1
The "Variable length lookbehind is experimental in regex" warning is
also resolved by this patch.
Fixes: 91f950e8b9d8 ("scripts/kernel-doc: match -Werror flag strictly")
Reported-by: Swarup Laxman Kotiaklapudi <swarupkotikalapudi@gmail.com>
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Closes: https://lore.kernel.org/r/20231028182231.123996-1-swarupkotikalapudi@gmail.com/
Reviewed-by: Akira Yokosawa <akiyks@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Link: https://lore.kernel.org/r/20231030085404.3343403-1-yujie.liu@intel.com
|
|
CDX controller provides subsystem vendor, subsystem device, class and
revision info of the device along with vendor and device ID in native
endian format. CDX Bus system uses this information to bind the cdx
device to the cdx device driver.
Co-developed-by: Puneet Gupta <puneet.gupta@amd.com>
Signed-off-by: Puneet Gupta <puneet.gupta@amd.com>
Co-developed-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Nipun Gupta <nipun.gupta@amd.com>
Signed-off-by: Abhijit Gangurde <abhijit.gangurde@amd.com>
Reviewed-by: Pieter Jansen van Vuuren <pieter.jansen-van-vuuren@amd.com>
Tested-by: Nikhil Agarwal <nikhil.agarwal@amd.com>
Link: https://lore.kernel.org/r/20231017160505.10640-8-abhijit.gangurde@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Kernel-internal prototypes, references to current_thread_info()
and code hidden behind a CONFIG_HEXAGON_ARCH_VERSION switch are
certainly not usable in userspace, so this should not reside
in a uapi header. Move the code into an internal version of
ptrace.h instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Mapping symbols emitted in the readelf output can confuse the
'faddr2line' symbol size calculation, resulting in the erroneous
rejection of valid offsets. This is especially prevalent when building
an arm64 kernel with CONFIG_CFI_CLANG=y, where most functions are
prefixed with a 32-bit data value in a '$d.n' section. For example:
447538: ffff800080014b80 548 FUNC GLOBAL DEFAULT 2 do_one_initcall
104: ffff800080014c74 0 NOTYPE LOCAL DEFAULT 2 $x.73
106: ffff800080014d30 0 NOTYPE LOCAL DEFAULT 2 $x.75
111: ffff800080014da4 0 NOTYPE LOCAL DEFAULT 2 $d.78
112: ffff800080014da8 0 NOTYPE LOCAL DEFAULT 2 $x.79
36: ffff800080014de0 200 FUNC LOCAL DEFAULT 2 run_init_process
Adding a warning to do_one_initcall() results in:
| WARNING: CPU: 0 PID: 1 at init/main.c:1236 do_one_initcall+0xf4/0x260
Which 'faddr2line' refuses to accept:
$ ./scripts/faddr2line vmlinux do_one_initcall+0xf4/0x260
skipping do_one_initcall address at 0xffff800080014c74 due to size mismatch (0x260 != 0x224)
no match for do_one_initcall+0xf4/0x260
Filter out these entries from readelf using a shell reimplementation of
is_mapping_symbol(), so that the size of a symbol is calculated as a
delta to the next symbol present in ksymtab.
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20231002165750.1661-4-will@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
GNU utilities cannot necessarily parse objects built by LLVM, which can
result in confusing errors when using 'faddr2line':
$ CROSS_COMPILE=aarch64-linux-gnu- ./scripts/faddr2line vmlinux do_one_initcall+0xf4/0x260
aarch64-linux-gnu-addr2line: vmlinux: unknown type [0x13] section `.relr.dyn'
aarch64-linux-gnu-addr2line: DWARF error: invalid or unhandled FORM value: 0x25
do_one_initcall+0xf4/0x260:
aarch64-linux-gnu-addr2line: vmlinux: unknown type [0x13] section `.relr.dyn'
aarch64-linux-gnu-addr2line: DWARF error: invalid or unhandled FORM value: 0x25
$x.73 at main.c:?
Although this can be worked around by setting CROSS_COMPILE to "llvm=-",
it's cleaner to follow the same syntax as the top-level Makefile and
accept LLVM= as an indication to use the llvm- tools, optionally
specifying their location or specific version number.
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20231002165750.1661-3-will@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
As Josh points out in 20230724234734.zy67gm674vl3p3wv@treble:
> Problem is, I think the kernel's symbol printing code prints the
> nearest kallsyms symbol, and there are some valid non-FUNC code
> symbols. For example, syscall_return_via_sysret.
so we shouldn't be considering only 'FUNC'-type symbols in the output
from readelf.
Drop the function symbol type filtering from the faddr2line outer loop.
Suggested-by: Josh Poimboeuf <jpoimboe@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20230724234734.zy67gm674vl3p3wv@treble
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20231002165750.1661-2-will@kernel.org
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
|
|
In our CI testing, we use some commands as below to only turn a specific
type of warnings into errors, but we notice that kernel-doc warnings
are also turned into errors unexpectedly.
$ make KCFLAGS="-Werror=return-type" W=1 kernel/fork.o
kernel/fork.c:1406: warning: Function parameter or member 'mm' not described in 'set_mm_exe_file'
kernel/fork.c:1406: warning: Function parameter or member 'new_exe_file' not described in 'set_mm_exe_file'
kernel/fork.c:1441: warning: Function parameter or member 'mm' not described in 'replace_mm_exe_file'
kernel/fork.c:1441: warning: Function parameter or member 'new_exe_file' not described in 'replace_mm_exe_file'
kernel/fork.c:1491: warning: Function parameter or member 'mm' not described in 'get_mm_exe_file'
kernel/fork.c:1510: warning: Function parameter or member 'task' not described in 'get_task_exe_file'
kernel/fork.c:1534: warning: Function parameter or member 'task' not described in 'get_task_mm'
kernel/fork.c:2109: warning: bad line:
kernel/fork.c:2130: warning: Function parameter or member 'ret' not described in '__pidfd_prepare'
kernel/fork.c:2130: warning: Excess function parameter 'pidfd' description in '__pidfd_prepare'
kernel/fork.c:2179: warning: Function parameter or member 'ret' not described in 'pidfd_prepare'
kernel/fork.c:2179: warning: Excess function parameter 'pidfd' description in 'pidfd_prepare'
kernel/fork.c:3195: warning: expecting prototype for clone3(). Prototype was for sys_clone3() instead
13 warnings as Errors
make[3]: *** [scripts/Makefile.build:243: kernel/fork.o] Error 13
make[3]: *** Deleting file 'kernel/fork.o'
make[2]: *** [scripts/Makefile.build:480: kernel] Error 2
make[1]: *** [/root/linux/Makefile:1913: .] Error 2
make: *** [Makefile:234: __sub-make] Error 2
>From the git history, commit 2c12c8103d8f ("scripts/kernel-doc:
optionally treat warnings as errors") introduces a new command-line
option to make kernel-doc warnings into errors. It can also read the
KCFLAGS environment variable to decide whether to turn this option on,
but the regex used for matching may not be accurate enough. It can match
both "-Werror" and "-Werror=<diagnostic-type>", so the option is turned
on by mistake in the latter case.
Fix this by strictly matching the flag "-Werror": there must be a space
or start of string in the front, and a space or end of string at the
end. This can handle all the following cases correctly:
KCFLAGS="-Werror" make W=1 [MATCH]
KCFLAGS="-Werror=return-type" make W=1 [NO MATCH]
KCFLAGS="-Wcomment -Werror -Wundef" make W=1 [MATCH]
KCFLAGS="-Wcomment -Werror=return-type -Wundef" make W=1 [NO MATCH]
Fixes: 2c12c8103d8f ("scripts/kernel-doc: optionally treat warnings as errors")
Signed-off-by: Yujie Liu <yujie.liu@intel.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20231019095637.2471840-1-yujie.liu@intel.com>
|
|
Enabling CONFIG_KCSAN leads to unconverted, default return thunks to
remain after patching.
As David Kaplan describes in his debugging of the issue, it is caused by
a couple of KCSAN-generated constructors which aren't processed by
objtool:
"When KCSAN is enabled, GCC generates lots of constructor functions
named _sub_I_00099_0 which call __tsan_init and then return. The
returns in these are generally annotated normally by objtool and fixed
up at runtime. But objtool runs on vmlinux.o and vmlinux.o does not
include a couple of object files that are in vmlinux, like
init/version-timestamp.o and .vmlinux.export.o, both of which contain
_sub_I_00099_0 functions. As a result, the returns in these functions
are not annotated, and the panic occurs when we call one of them in
do_ctors and it uses the default return thunk.
This difference can be seen by counting the number of these functions in the object files:
$ objdump -d vmlinux.o|grep -c "<_sub_I_00099_0>:"
2601
$ objdump -d vmlinux|grep -c "<_sub_I_00099_0>:"
2603
If these functions are only run during kernel boot, there is no
speculation concern."
Fix it by disabling KCSAN on version-timestamp.o and .vmlinux.export.o
so the extra functions don't get generated. KASAN and GCOV are already
disabled for those files.
[ bp: Massage commit message. ]
Closes: https://lore.kernel.org/lkml/20231016214810.GA3942238@dev-arch.thelio-3990X/
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Acked-by: Marco Elver <elver@google.com>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20231017165946.v4i2d4exyqwqq3bx@treble
|
|
CONFIG_CPU_SRSO isn't dependent on CONFIG_CPU_UNRET_ENTRY (AMD
Retbleed), so the two features are independently configurable. Fix
several issues for the (presumably rare) case where CONFIG_CPU_SRSO is
enabled but CONFIG_CPU_UNRET_ENTRY isn't.
Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation")
Signed-off-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/299fb7740174d0f2335e91c58af0e9c242b4bac1.1693889988.git.jpoimboe@kernel.org
|
|
When doing Python programming it is a nice convention to insert the if
statement `if __name__ == "__main__":` before any main code that does
actual functionalities to ensure the code will be executed only as a
script rather than as an imported module. Hence attach the missing
judgement to show_delta.
Link: https://lkml.kernel.org/r/20231013132832.165768-1-2023002089@link.tyut.edu.cn
Signed-off-by: Hu Haowen <2023002089@link.tyut.edu.cn>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nicolas Schier <n.schier@avm.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
There were some recent attempts [1] [2] to make the K: field less noisy
and its behavior more obvious. Ultimately, a shift in the default
behavior and an associated command line flag is the best choice.
Currently, K: will match keywords found in both patches and files.
Matching content from entire files is (while documented) not obvious
behavior and is usually not wanted by maintainers.
Now only patch content will be matched against unless --keywords-in-file
is also provided as an argument to get_maintainer.
Add the actual keyword matched to the role or rolestats as well.
For instance given the diff below that removes clang:
: diff --git a/drivers/hid/bpf/entrypoints/README b/drivers/hid/bpf/entrypoints/README
: index 147e0d41509f..f88eb19e8ef2 100644
: --- a/drivers/hid/bpf/entrypoints/README
: +++ b/drivers/hid/bpf/entrypoints/README
: @@ -1,4 +1,4 @@
: WARNING:
: If you change "entrypoints.bpf.c" do "make -j" in this directory to rebuild "entrypoints.skel.h".
: -Make sure to have clang 10 installed.
: +Make sure to have 10 installed.
: See Documentation/bpf/bpf_devel_QA.rst
The new role/rolestats output includes ":Keyword:\b(?i:clang|llvm)\b"
$ git diff drivers/hid/bpf/entrypoints/README | .scripts/get_maintainer.pl
Jiri Kosina <jikos@kernel.org> (maintainer:HID CORE LAYER,commit_signer:1/1=100%)
Benjamin Tissoires <benjamin.tissoires@redhat.com> (maintainer:HID CORE LAYER,commit_signer:1/1=100%,authored:1/1=100%,added_lines:4/4=100%)
Nathan Chancellor <nathan@kernel.org> (supporter:CLANG/LLVM BUILD SUPPORT:Keyword:\b(?i:clang|llvm)\b)
Nick Desaulniers <ndesaulniers@google.com> (supporter:CLANG/LLVM BUILD SUPPORT:Keyword:\b(?i:clang|llvm)\b)
Tom Rix <trix@redhat.com> (reviewer:CLANG/LLVM BUILD SUPPORT:Keyword:\b(?i:clang|llvm)\b)
Greg Kroah-Hartman <gregkh@linuxfoundation.org> (commit_signer:1/1=100%)
linux-input@vger.kernel.org (open list:HID CORE LAYER)
linux-kernel@vger.kernel.org (open list)
llvm@lists.linux.dev (open list:CLANG/LLVM BUILD SUPPORT:Keyword:\b(?i:clang|llvm)\b)
Link: https://lore.kernel.org/r/20231004-get_maintainer_change_k-v1-1-ac7ced18306a@google.com
Link: https://lore.kernel.org/all/20230928-get_maintainer_add_d-v2-0-8acb3f394571@google.com
Link: https://lore.kernel.org/all/3dca40b677dd2fef979a5a581a2db91df2c21801.camel@perches.com
Original-patch-by: Justin Stitt <justinstitt@google.com>
Link: https://lkml.kernel.org/r/01fe46f0c58aa8baf92156ae2bdccfb2bf0cb48e.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Tested-by: Justin Stitt <justinstitt@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
This is the next upgrade to the Rust toolchain, from 1.72.1 to 1.73.0
(i.e. the latest) [1].
See the upgrade policy [2] and the comments on the first upgrade in
commit 3ed03f4da06e ("rust: upgrade to Rust 1.68.2").
# Unstable features
No unstable features (that we use) were stabilized.
Therefore, the only unstable feature allowed to be used outside
the `kernel` crate is still `new_uninit`, though other code to be
upstreamed may increase the list.
Please see [3] for details.
# Required changes
For the upgrade, the following changes are required:
- Allow `internal_features` for `feature(compiler_builtins)` since
now Rust warns about using internal compiler and standard library
features (similar to how it also warns about incomplete ones) [4].
- A cleanup for a documentation link thanks to a new `rustdoc` lint.
See previous commits for details.
- A need to make an intra-doc link to a macro explicit, due to a
change in behavior in `rustdoc`. See previous commits for details.
# `alloc` upgrade and reviewing
The vast majority of changes are due to our `alloc` fork being upgraded
at once.
There are two kinds of changes to be aware of: the ones coming from
upstream, which we should follow as closely as possible, and the updates
needed in our added fallible APIs to keep them matching the newer
infallible APIs coming from upstream.
Instead of taking a look at the diff of this patch, an alternative
approach is reviewing a diff of the changes between upstream `alloc` and
the kernel's. This allows to easily inspect the kernel additions only,
especially to check if the fallible methods we already have still match
the infallible ones in the new version coming from upstream.
Another approach is reviewing the changes introduced in the additions in
the kernel fork between the two versions. This is useful to spot
potentially unintended changes to our additions.
To apply these approaches, one may follow steps similar to the following
to generate a pair of patches that show the differences between upstream
Rust and the kernel (for the subset of `alloc` we use) before and after
applying this patch:
# Get the difference with respect to the old version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > old.patch
git -C linux restore rust/alloc
# Apply this patch.
git -C linux am rust-upgrade.patch
# Get the difference with respect to the new version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > new.patch
git -C linux restore rust/alloc
Now one may check the `new.patch` to take a look at the additions (first
approach) or at the difference between those two patches (second
approach). For the latter, a side-by-side tool is recommended.
Link: https://github.com/rust-lang/rust/blob/stable/RELEASES.md#version-1730-2023-10-05 [1]
Link: https://rust-for-linux.com/rust-version-policy [2]
Link: https://github.com/Rust-for-Linux/linux/issues/2 [3]
Link: https://github.com/rust-lang/compiler-team/issues/596 [4]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Vincenzo Palazzo <vincenzopalazzodev@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20231005210556.466856-4-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Add a -checks argument to allow the checks passed to the clang-tool to
be set on the command line.
Add a pass through -header-filter option.
Don't run analysis on non-C or CPP files.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-4-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Make the output more stable and deterministic.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-3-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Builds in tools still use the cmd_ prefix in .cmd files, so don't
require the saved part. Name the groups in the line pattern match so
that changing the regular expression is more robust and works with the
addition of a new match group.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: llvm@lists.linux.dev
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Tom Rix <trix@redhat.com>
Cc: bpf@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-perf-users@vger.kernel.org
Link: https://lore.kernel.org/r/20231009183920.200859-2-irogers@google.com
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
Now that the vfs can handle "const struct xattr_handler" make sure that
new usages of the struct already enter the tree as const.
Link: https://lore.kernel.org/lkml/20230930050033.41174-1-wedsonaf@gmail.com/
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20231012-vfs-xattr_const-v1-1-6c21e82d4d5e@weissschuh.net
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Provide the generic sync_try_cmpxchg() function from the
raw_ prefixed version, also adding explicit instrumentation.
The patch amends existing scripts to generate sync_try_cmpxchg()
locking primitive and its raw_sync_try_cmpxchg() fallback, while
leaving existing macros from the try_cmpxchg() family unchanged.
The target can define its own arch_sync_try_cmpxchg() to override the
generic version of raw_sync_try_cmpxchg(). This allows the target
to generate more optimal assembly than the generic version.
Additionally, the patch renames two scripts to better reflect
whet they really do.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-kernel@vger.kernel.org
|
|
The performance mode of the gcc-plugin randstruct was shuffling struct
members outside of the cache-line groups. Limit the range to the
specified group indexes.
Cc: linux-hardening@vger.kernel.org
Cc: stable@vger.kernel.org
Reported-by: Lukas Loidolt <e1634039@student.tuwien.ac.at>
Closes: https://lore.kernel.org/all/f3ca77f0-e414-4065-83a5-ae4c4d25545d@student.tuwien.ac.at
Fixes: 313dd1b62921 ("gcc-plugins: Add the randstruct plugin")
Signed-off-by: Kees Cook <keescook@chromium.org>
|
|
This is the third upgrade to the Rust toolchain, from 1.71.1 to 1.72.1
(i.e. the latest) [1].
See the upgrade policy [2] and the comments on the first upgrade in
commit 3ed03f4da06e ("rust: upgrade to Rust 1.68.2").
# Unstable features
No unstable features (that we use) were stabilized.
Therefore, the only unstable feature allowed to be used outside
the `kernel` crate is still `new_uninit`, though other code to be
upstreamed may increase the list.
Please see [3] for details.
# Other improvements
Previously, the compiler could incorrectly generate a `.eh_frame`
section under `-Cpanic=abort`. We were hitting this bug when debug
assertions were enabled (`CONFIG_RUST_DEBUG_ASSERTIONS=y`) [4]:
LD .tmp_vmlinux.kallsyms1
ld.lld: error: <internal>:(.eh_frame) is being placed in '.eh_frame'
Gary fixed the issue in Rust 1.72.0 [5].
# Required changes
For the upgrade, the following changes are required:
- A call to `Box::from_raw` in `rust/kernel/sync/arc.rs` now requires
an explicit `drop()` call. See previous patch for details.
# `alloc` upgrade and reviewing
The vast majority of changes are due to our `alloc` fork being upgraded
at once.
There are two kinds of changes to be aware of: the ones coming from
upstream, which we should follow as closely as possible, and the updates
needed in our added fallible APIs to keep them matching the newer
infallible APIs coming from upstream.
Instead of taking a look at the diff of this patch, an alternative
approach is reviewing a diff of the changes between upstream `alloc` and
the kernel's. This allows to easily inspect the kernel additions only,
especially to check if the fallible methods we already have still match
the infallible ones in the new version coming from upstream.
Another approach is reviewing the changes introduced in the additions in
the kernel fork between the two versions. This is useful to spot
potentially unintended changes to our additions.
To apply these approaches, one may follow steps similar to the following
to generate a pair of patches that show the differences between upstream
Rust and the kernel (for the subset of `alloc` we use) before and after
applying this patch:
# Get the difference with respect to the old version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > old.patch
git -C linux restore rust/alloc
# Apply this patch.
git -C linux am rust-upgrade.patch
# Get the difference with respect to the new version.
git -C rust checkout $(linux/scripts/min-tool-version.sh rustc)
git -C linux ls-tree -r --name-only HEAD -- rust/alloc |
cut -d/ -f3- |
grep -Fv README.md |
xargs -IPATH cp rust/library/alloc/src/PATH linux/rust/alloc/PATH
git -C linux diff --patch-with-stat --summary -R > new.patch
git -C linux restore rust/alloc
Now one may check the `new.patch` to take a look at the additions (first
approach) or at the difference between those two patches (second
approach). For the latter, a side-by-side tool is recommended.
Link: https://github.com/rust-lang/rust/blob/stable/RELEASES.md#version-1721-2023-09-19 [1]
Link: https://rust-for-linux.com/rust-version-policy [2]
Link: https://github.com/Rust-for-Linux/linux/issues/2 [3]
Closes: https://github.com/Rust-for-Linux/linux/issues/1012 [4]
Link: https://github.com/rust-lang/rust/pull/112403 [5]
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Björn Roy Baron <bjorn3_gh@protonmail.com>
Link: https://lore.kernel.org/r/20230823160244.188033-3-ojeda@kernel.org
[ Used 1.72.1 instead of .0 (no changes in `alloc`) and reworded
to mention that we hit the `.eh_frame` bug under debug assertions. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Since commit d8131c2965d5 ("kbuild: remove $(MODLIB)/source symlink"),
modules_install does not create the 'source' symlink.
Remove the stale code from builddeb and kernel.spec.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Drivers must not reference functions marked with __exit as these likely
are not available when the code is built-in.
There are few creative offenders uncovered for example in ARCH=amd64
allmodconfig builds. So only trigger the section mismatch warning for
W=1 builds.
The dual rule that drivers must not reference .init.* is implemented
since commit 0db252452378 ("modpost: don't allow *driver to reference
.init.*") which however missed that .exit.* should be handled in the
same way.
Thanks to Masahiro Yamada and Arnd Bergmann who gave valuable hints to
find this improvement.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Without this 'else' statement, an "usb" name goes into two handlers:
the first/previous 'if' statement _AND_ the for-loop over 'devtable',
but the latter is useless as it has no 'usb' device_id entry anyway.
Tested with allmodconfig before/after patch; no changes to *.mod.c:
git checkout v6.6-rc3
make -j$(nproc) allmodconfig
make -j$(nproc) olddefconfig
make -j$(nproc)
find . -name '*.mod.c' | cpio -pd /tmp/before
# apply patch
make -j$(nproc)
find . -name '*.mod.c' | cpio -pd /tmp/after
diff -r /tmp/before/ /tmp/after/
# no difference
Fixes: acbef7b76629 ("modpost: fix module autoloading for OF devices with generic compatible property")
Signed-off-by: Mauricio Faria de Oliveira <mfo@canonical.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The main challenge with defining `work_struct` fields is making sure
that the function pointer stored in the `work_struct` is appropriate for
the work item type it is embedded in. It needs to know the offset of the
`work_struct` field being used (even if there are several!) so that it
can do a `container_of`, and it needs to know the type of the work item
so that it can call into the right user-provided code. All of this needs
to happen in a way that provides a safe API to the user, so that users
of the workqueue cannot mix up the function pointers.
There are three important pieces that are relevant when doing this:
* The pointer type.
* The work item struct. This is what the pointer points at.
* The `work_struct` field. This is a field of the work item struct.
This patch introduces a separate trait for each piece. The pointer type
is given a `WorkItemPointer` trait, which pointer types need to
implement to be usable with the workqueue. This trait will be
implemented for `Arc` and `Box` in a later patch in this patchset.
Implementing this trait is unsafe because this is where the
`container_of` operation happens, but user-code will not need to
implement it themselves.
The work item struct should then implement the `WorkItem` trait. This
trait is where user-code specifies what they want to happen when a work
item is executed. It also specifies what the correct pointer type is.
Finally, to make the work item struct know the offset of its
`work_struct` field, we use a trait called `HasWork<T, ID>`. If a type
implements this trait, then the type declares that, at the given offset,
there is a field of type `Work<T, ID>`. The trait is marked unsafe
because the OFFSET constant must be correct, but we provide an
`impl_has_work!` macro that can safely implement `HasWork<T>` on a type.
The macro expands to something that only compiles if the specified field
really has the type `Work<T>`. It is used like this:
```
struct MyWorkItem {
work_field: Work<MyWorkItem, 1>,
}
impl_has_work! {
impl HasWork<MyWorkItem, 1> for MyWorkItem { self.work_field }
}
```
Note that since the `Work` type is annotated with an id, you can have
several `work_struct` fields by using a different id for each one.
Co-developed-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Gary Guo <gary@garyguo.net>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Andreas Hindborg <a.hindborg@samsung.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
|
|
Kmod is now (since kmod commit 09c9f8c5df04 ("libkmod: Use kernel
decompression when available")) using the kernel decompressor, when
loading compressed modules.
However, the kernel XZ decompressor is XZ Embedded, which doesn't
handle CRC64 and dictionaries larger than 1MiB.
Use CRC32 and 1MiB dictionary when XZ compressing and installing
kernel modules.
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1050582
Signed-off-by: Martin Nybo Andersen <tweek@tweek.dk>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"13 hotfixes, 10 of which pertain to post-6.5 issues. The other three
are cc:stable"
* tag 'mm-hotfixes-stable-2023-09-23-10-31' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
proc: nommu: fix empty /proc/<pid>/maps
filemap: add filemap_map_order0_folio() to handle order0 folio
proc: nommu: /proc/<pid>/maps: release mmap read lock
mm: memcontrol: fix GFP_NOFS recursion in memory.high enforcement
pidfd: prevent a kernel-doc warning
argv_split: fix kernel-doc warnings
scatterlist: add missing function params to kernel-doc
selftests/proc: fixup proc-empty-vm test after KSM changes
revert "scripts/gdb/symbols: add specific ko module load command"
selftests: link libasan statically for tests with -fsanitize=address
task_work: add kerneldoc annotation for 'data' argument
mm: page_alloc: fix CMA and HIGHATOMIC landing on the wrong buddy list
sh: mm: re-add lost __ref to ioremap_prot() to fix modpost warning
|
|
Add a new flag, '--driver-match', to the dt-extract-compatibles script
that causes it to only print out compatibles that are expected to match
a driver. This output can then be used by tests to detect device probe
failures.
In order to filter the compatibles down to only ones that will match to
a driver, the following is considered:
- A compatible needs to show up in a driver's of_match_table for it to
be matched to a driver
- Compatibles that are used in both of_match_table and OF_DECLARE type
macros can't be expected to match to a driver and so are ignored.
One exception is CLK_OF_DECLARE_DRIVER, since it indicates that a
driver will also later probe, so compatibles in this macro are not
ignored.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20230828211424.2964562-3-nfraprado@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Move the handling of the cfile arguments to a separate generator
function to avoid redundancy.
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20230828211424.2964562-2-nfraprado@collabora.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Since commit:
9257959a6e5b4fca ("locking/atomic: scripts: restructure fallback ifdeffery")
The ordering fallbacks for atomic*_read_acquire() and
atomic*_set_release() erroneously fall back to the implictly relaxed
atomic*_read() and atomic*_set() variants respectively, without any
additional barriers. This loses the ACQUIRE and RELEASE ordering
semantics, which can result in a wide variety of problems, even on
strongly-ordered architectures where the implementation of
atomic*_read() and/or atomic*_set() allows the compiler to reorder those
relative to other accesses.
In practice this has been observed to break bit spinlocks on arm64,
resulting in dentry cache corruption.
The fallback logic was intended to allow ACQUIRE/RELEASE/RELAXED ops to
be defined in terms of FULL ops, but where an op had RELAXED ordering by
default, this unintentionally permitted the ACQUIRE/RELEASE ops to be
defined in terms of the implicitly RELAXED default.
This patch corrects the logic to avoid falling back to implicitly
RELAXED ops, resulting in the same behaviour as prior to commit
9257959a6e5b4fca.
I've verified the resulting assembly on arm64 by generating outlined
wrappers of the atomics. Prior to this patch the compiler generates
sequences using relaxed load (LDR) and store (STR) instructions, e.g.
| <outlined_atomic64_read_acquire>:
| ldr x0, [x0]
| ret
|
| <outlined_atomic64_set_release>:
| str x1, [x0]
| ret
With this patch applied the compiler generates sequences using the
intended load-acquire (LDAR) and store-release (STLR) instructions, e.g.
| <outlined_atomic64_read_acquire>:
| ldar x0, [x0]
| ret
|
| <outlined_atomic64_set_release>:
| stlr x1, [x0]
| ret
To make sure that there were no other victims of the ifdeffery rewrite,
I generated outlined copies of all of the {atomic,atomic64,atomic_long}
atomic operations before and after commit 9257959a6e5b4fca. A diff of
the generated assembly on arm64 shows that only the read_acquire() and
set_release() operations were changed, and only lost their intended
ordering:
| [mark@lakrids:~/src/linux]% diff -u \
| <(aarch64-linux-gnu-objdump -d before-9257959a6e5b4fca.o)
| <(aarch64-linux-gnu-objdump -d after-9257959a6e5b4fca.o)
| --- /proc/self/fd/11 2023-09-19 16:51:51.114779415 +0100
| +++ /proc/self/fd/16 2023-09-19 16:51:51.114779415 +0100
| @@ -1,5 +1,5 @@
|
| -before-9257959a6e5b4fca.o: file format elf64-littleaarch64
| +after-9257959a6e5b4fca.o: file format elf64-littleaarch64
|
|
| Disassembly of section .text:
| @@ -9,7 +9,7 @@
| 4: d65f03c0 ret
|
| 0000000000000008 <outlined_atomic_read_acquire>:
| - 8: 88dffc00 ldar w0, [x0]
| + 8: b9400000 ldr w0, [x0]
| c: d65f03c0 ret
|
| 0000000000000010 <outlined_atomic_set>:
| @@ -17,7 +17,7 @@
| 14: d65f03c0 ret
|
| 0000000000000018 <outlined_atomic_set_release>:
| - 18: 889ffc01 stlr w1, [x0]
| + 18: b9000001 str w1, [x0]
| 1c: d65f03c0 ret
|
| 0000000000000020 <outlined_atomic_add>:
| @@ -1230,7 +1230,7 @@
| 1070: d65f03c0 ret
|
| 0000000000001074 <outlined_atomic64_read_acquire>:
| - 1074: c8dffc00 ldar x0, [x0]
| + 1074: f9400000 ldr x0, [x0]
| 1078: d65f03c0 ret
|
| 000000000000107c <outlined_atomic64_set>:
| @@ -1238,7 +1238,7 @@
| 1080: d65f03c0 ret
|
| 0000000000001084 <outlined_atomic64_set_release>:
| - 1084: c89ffc01 stlr x1, [x0]
| + 1084: f9000001 str x1, [x0]
| 1088: d65f03c0 ret
|
| 000000000000108c <outlined_atomic64_add>:
| @@ -2427,7 +2427,7 @@
| 207c: d65f03c0 ret
|
| 0000000000002080 <outlined_atomic_long_read_acquire>:
| - 2080: c8dffc00 ldar x0, [x0]
| + 2080: f9400000 ldr x0, [x0]
| 2084: d65f03c0 ret
|
| 0000000000002088 <outlined_atomic_long_set>:
| @@ -2435,7 +2435,7 @@
| 208c: d65f03c0 ret
|
| 0000000000002090 <outlined_atomic_long_set_release>:
| - 2090: c89ffc01 stlr x1, [x0]
| + 2090: f9000001 str x1, [x0]
| 2094: d65f03c0 ret
|
| 0000000000002098 <outlined_atomic_long_add>:
I've build tested this with a variety of configs for alpha, arm, arm64,
csky, i386, m68k, microblaze, mips, nios2, openrisc, powerpc, riscv,
s390, sh, sparc, x86_64, and xtensa, for which I've seen no issues. I
was unable to build test for ia64 and parisc due to existing build
breakage in v6.6-rc2.
Fixes: 9257959a6e5b4fca ("locking/atomic: scripts: restructure fallback ifdeffery")
Reported-by: Ming Lei <ming.lei@redhat.com>
Reported-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Baokun Li <libaokun1@huawei.com>
Link: https://lkml.kernel.org/r/20230919171430.2697727-1-mark.rutland@arm.com
|
|
Revert 11f956538c07 ("scripts/gdb/symbols: add specific ko module load
command") due to breakage identified by Johannes Berg in [1].
Fixes: 11f956538c07 ("scripts/gdb/symbols: add specific ko module load command")
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Closes: https://lkml.kernel.org/r/c44b748307a074d0c250002cdcfe209b8cce93c9.camel@sipsolutions.net [1]
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Cc: Chinwen Chang <chinwen.chang@mediatek.com>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Cc: Kieran Bingham <kbingham@kernel.org>
Cc: Kuan-Ying Lee <Kuan-Ying.Lee@mediatek.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Qun-Wei Lin <qun-wei.lin@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix kernel-devel RPM and linux-headers Deb package
- Fix too long argument list error in 'make modules_install'
* tag 'kbuild-fixes-v6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: avoid long argument lists in make modules_install
kbuild: fix kernel-devel RPM package and linux-headers Deb package
|
|
Running "make modules_install" may fail with
make[2]: execvp: /bin/sh: Argument list too long
if many modules are built and INSTALL_MOD_PATH is long. This is because
scripts/Makefile.modinst creates all directories with one mkdir command.
Use $(foreach ...) instead to prevent an excessive argument list.
Fixes: 2dfec887c0fd ("kbuild: reduce the number of mkdir calls during modules_install")
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
