| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- support "prefer busy polling" NAPI operation mode, where we defer
softirq for some time expecting applications to periodically busy
poll
- AF_XDP: improve efficiency by more batching and hindering the
adjacency cache prefetcher
- af_packet: make packet_fanout.arr size configurable up to 64K
- tcp: optimize TCP zero copy receive in presence of partial or
unaligned reads making zero copy a performance win for much smaller
messages
- XDP: add bulk APIs for returning / freeing frames
- sched: support fragmenting IP packets as they come out of conntrack
- net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs
BPF:
- BPF switch from crude rlimit-based to memcg-based memory accounting
- BPF type format information for kernel modules and related tracing
enhancements
- BPF implement task local storage for BPF LSM
- allow the FENTRY/FEXIT/RAW_TP tracing programs to use
bpf_sk_storage
Protocols:
- mptcp: improve multiple xmit streams support, memory accounting and
many smaller improvements
- TLS: support CHACHA20-POLY1305 cipher
- seg6: add support for SRv6 End.DT4/DT6 behavior
- sctp: Implement RFC 6951: UDP Encapsulation of SCTP
- ppp_generic: add ability to bridge channels directly
- bridge: Connectivity Fault Management (CFM) support as is defined
in IEEE 802.1Q section 12.14.
Drivers:
- mlx5: make use of the new auxiliary bus to organize the driver
internals
- mlx5: more accurate port TX timestamping support
- mlxsw:
- improve the efficiency of offloaded next hop updates by using
the new nexthop object API
- support blackhole nexthops
- support IEEE 802.1ad (Q-in-Q) bridging
- rtw88: major bluetooth co-existance improvements
- iwlwifi: support new 6 GHz frequency band
- ath11k: Fast Initial Link Setup (FILS)
- mt7915: dual band concurrent (DBDC) support
- net: ipa: add basic support for IPA v4.5
Refactor:
- a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
Siewior
- phy: add support for shared interrupts; get rid of multiple driver
APIs and have the drivers write a full IRQ handler, slight growth
of driver code should be compensated by the simpler API which also
allows shared IRQs
- add common code for handling netdev per-cpu counters
- move TX packet re-allocation from Ethernet switch tag drivers to a
central place
- improve efficiency and rename nla_strlcpy
- number of W=1 warning cleanups as we now catch those in a patchwork
build bot
Old code removal:
- wan: delete the DLCI / SDLA drivers
- wimax: move to staging
- wifi: remove old WDS wifi bridging support"
* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
net: hns3: fix expression that is currently always true
net: fix proc_fs init handling in af_packet and tls
nfc: pn533: convert comma to semicolon
af_vsock: Assign the vsock transport considering the vsock address flags
af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
vsock_addr: Check for supported flag values
vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
vm_sockets: Add flags field in the vsock address data structure
net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
nfc: s3fwrn5: Release the nfc firmware
net: vxget: clean up sparse warnings
mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
mlxsw: reg: Add Router LPM Cache Enable Register
mlxsw: reg: Add Router LPM Cache ML Delete Register
mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
mlxsw: reg: Add XM Router M Table Register
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf/kprobes updates from Thomas Gleixner:
"Make kretprobes lockless to avoid the rp->lock performance and
potential lock ordering issues"
* tag 'perf-kprobes-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomics: Regenerate the atomics-check SHA1's
kprobes: Replace rp->free_instance with freelist
freelist: Implement lockless freelist
asm-generic/atomic: Add try_cmpxchg() fallbacks
kprobes: Remove kretprobe hash
llist: Add nonatomic __llist_add() and __llist_dell_all()
|
|
Pull documentation updates from Jonathan Corbet:
"A much quieter cycle for documentation (happily), with, one hopes, the
bulk of the churn behind us. Significant stuff in this pull includes:
- A set of new Chinese translations
- Italian translation updates
- A mechanism from Mauro to automatically format
Documentation/features for the built docs
- Automatic cross references without explicit :ref: markup
- A new reset-controller document
- An extensive new document on reporting problems from Thorsten
That last patch also adds the CC-BY-4.0 license to LICENSES/dual;
there was some discussion on this, but we seem to have consensus and
an ack from Greg for that addition"
* tag 'docs-5.11' of git://git.lwn.net/linux: (50 commits)
docs: fix broken cross reference in translations/zh_CN
docs: Note that sphinx 1.7 will be required soon
docs: update requirements to install six module
docs: reporting-issues: move 'outdated, need help' note to proper place
docs: Update documentation to reflect what TAINT_CPU_OUT_OF_SPEC means
docs: add a reset controller chapter to the driver API docs
docs: make reporting-bugs.rst obsolete
docs: Add a new text describing how to report bugs
LICENSES: Add the CC-BY-4.0 license
Documentation: fix multiple typos found in the admin-guide subdirectory
Documentation: fix typos found in admin-guide subdirectory
kernel-doc: Fix example in Nested structs/unions
docs: clean up sysctl/kernel: titles, version
docs: trace: fix event state structure name
docs: nios2: add missing ReST file
scripts: get_feat.pl: reduce table width for all features output
scripts: get_feat.pl: change the group by order
scripts: get_feat.pl: make complete table more coincise
scripts: kernel-doc: fix parsing function-like typedefs
Documentation: fix typos found in process, dev-tools, and doc-guide subdirectories
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 updates from Heiko Carstens:
- Add support for the hugetlb_cma command line option to allocate
gigantic hugepages using CMA
- Add arch_get_random_long() support.
- Add ap bus userspace notifications.
- Increase default size of vmalloc area to 512GB and otherwise let it
increase dynamically by the size of physical memory. This should fix
all occurrences where the vmalloc area was not large enough.
- Completely get rid of set_fs() (aka select SET_FS) and rework address
space handling while doing that; making address space handling much
more simple.
- Reimplement getcpu vdso syscall in C.
- Add support for extended SCLP responses (> 4k). This allows e.g. to
handle also potential large system configurations.
- Simplify KASAN by removing 3-level page table support and only
supporting 4-levels from now on.
- Improve debug-ability of the kernel decompressor code, which now
prints also stack traces and symbols in case of problems to the
console.
- Remove more power management leftovers.
- Other various fixes and improvements all over the place.
* tag 's390-5.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (62 commits)
s390/mm: add support to allocate gigantic hugepages using CMA
s390/crypto: add arch_get_random_long() support
s390/smp: perform initial CPU reset also for SMT siblings
s390/mm: use invalid asce for user space when switching to init_mm
s390/idle: fix accounting with machine checks
s390/idle: add missing mt_cycles calculation
s390/boot: add build-id to decompressor
s390/kexec_file: fix diag308 subcode when loading crash kernel
s390/cio: fix use-after-free in ccw_device_destroy_console
s390/cio: remove pm support from ccw bus driver
s390/cio: remove pm support from css-bus driver
s390/cio: remove pm support from IO subchannel drivers
s390/cio: remove pm support from chsc subchannel driver
s390/vmur: remove unused pm related functions
s390/tape: remove unsupported PM functions
s390/cio: remove pm support from eadm-sch drivers
s390: remove pm support from console drivers
s390/dasd: remove unused pm related functions
s390/zfcp: remove pm support from zfcp driver
s390/ap: let bus_register() add the AP bus sysfs attributes
...
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-12-14
1) Expose bpf_sk_storage_*() helpers to iterator programs, from Florent Revest.
2) Add AF_XDP selftests based on veth devs to BPF selftests, from Weqaar Janjua.
3) Support for finding BTF based kernel attach targets through libbpf's
bpf_program__set_attach_target() API, from Andrii Nakryiko.
4) Permit pointers on stack for helper calls in the verifier, from Yonghong Song.
5) Fix overflows in hash map elem size after rlimit removal, from Eric Dumazet.
6) Get rid of direct invocation of llc in BPF selftests, from Andrew Delgadillo.
7) Fix xsk_recvmsg() to reorder socket state check before access, from Björn Töpel.
8) Add new libbpf API helper to retrieve ring buffer epoll fd, from Brendan Jackman.
9) Batch of minor BPF selftest improvements all over the place, from Florian Lehner,
KP Singh, Jiri Olsa and various others.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (31 commits)
selftests/bpf: Add a test for ptr_to_map_value on stack for helper access
bpf: Permits pointers on stack for helper calls
libbpf: Expose libbpf ring_buffer epoll_fd
selftests/bpf: Add set_attach_target() API selftest for module target
libbpf: Support modules in bpf_program__set_attach_target() API
selftests/bpf: Silence ima_setup.sh when not running in verbose mode.
selftests/bpf: Drop the need for LLVM's llc
selftests/bpf: fix bpf_testmod.ko recompilation logic
samples/bpf: Fix possible hang in xdpsock with multiple threads
selftests/bpf: Make selftest compilation work on clang 11
selftests/bpf: Xsk selftests - adding xdpxceiver to .gitignore
selftests/bpf: Drop tcp-{client,server}.py from Makefile
selftests/bpf: Xsk selftests - Bi-directional Sockets - SKB, DRV
selftests/bpf: Xsk selftests - Socket Teardown - SKB, DRV
selftests/bpf: Xsk selftests - DRV POLL, NOPOLL
selftests/bpf: Xsk selftests - SKB POLL, NOPOLL
selftests/bpf: Xsk selftests framework
bpf: Only provide bpf_sock_from_file with CONFIG_NET
bpf: Return -ENOTSUPP when attaching to non-kernel BTF
xsk: Validate socket state in xsk_recvmsg, prior touching socket members
...
====================
Link: https://lore.kernel.org/r/20201214214316.20642-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
xdp_return_frame_bulk() needs to pass a xdp_buff
to __xdp_return().
strlcpy got converted to strscpy but here it makes no
functional difference, so just keep the right code.
Conflicts:
net/netfilter/nf_tables_api.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
mlx5-next auxbus support
This pull request is targeting net-next and rdma-next branches.
This series provides mlx5 support for auxiliary bus devices.
It starts with a merge commit of tag 'auxbus-5.11-rc1' from
gregkh/driver-core into mlx5-next, then the mlx5 patches that will convert
mlx5 ulp devices (netdev, rdma, vdpa) to use the proper auxbus
infrastructure instead of the internal mlx5 device and interface management
implementation, which Leon is deleting at the end of this patchset.
Link: https://lore.kernel.org/alsa-devel/20201026111849.1035786-1-leon@kernel.org/
Thanks to everyone for the joint effort !
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
RDMA/mlx5: Remove IB representors dead code
net/mlx5: Simplify eswitch mode check
net/mlx5: Delete custom device management logic
RDMA/mlx5: Convert mlx5_ib to use auxiliary bus
net/mlx5e: Connect ethernet part to auxiliary bus
vdpa/mlx5: Connect mlx5_vdpa to auxiliary bus
net/mlx5: Register mlx5 devices to auxiliary virtual bus
vdpa/mlx5: Make hardware definitions visible to all mlx5 devices
net/mlx5_core: Clean driver version and name
net/mlx5: Properly convey driver version to firmware
driver core: auxiliary bus: minor coding style tweaks
driver core: auxiliary bus: make remove function return void
driver core: auxiliary bus: move slab.h from include file
Add auxiliary bus support
====================
Link: https://lore.kernel.org/r/20201207053349.402772-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Move -Wcast-align to W=3, which tends to be false-positive and there
is no tree-wide solution.
- Pass -fmacro-prefix-map to KBUILD_CPPFLAGS because it is a
preprocessor option and makes sense for .S files as well.
- Disable -gdwarf-2 for Clang's integrated assembler to avoid warnings.
- Disable --orphan-handling=warn for LLD 10.0.1 to avoid warnings.
- Fix undesirable line breaks in *.mod files.
* tag 'kbuild-fixes-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: avoid split lines in .mod files
kbuild: Disable CONFIG_LD_ORPHAN_WARN for ld.lld 10.0.1
kbuild: Hoist '--orphan-handling' into Kconfig
Kbuild: do not emit debug info for assembly with LLVM_IAS=1
kbuild: use -fmacro-prefix-map for .S sources
Makefile.extrawarn: move -Wcast-align to W=3
|
|
"xargs echo" is not a safe way to remove line breaks because the input
may exceed the command line limit and xargs may break it up into
multiple invocations of echo. This should never happen because
scripts/gen_autoksyms.sh expects all undefined symbols are placed in
the second line of .mod files.
One possible way is to replace "xargs echo" with
"sed ':x;N;$!bx;s/\n/ /g'" or something, but I rewrote the code by
using awk because it is more readable.
This issue was reported by Sami Tolvanen; in his Clang LTO patch set,
$(multi-used-m) is no longer an ELF object, but a thin archive that
contains LLVM bitcode files. llvm-nm prints out symbols for each
archive member separately, which results a lot of dupications, in some
places, beyond the system-defined limit.
This problem must be fixed irrespective of LTO, and we must ensure
zero possibility of having this issue.
Link: https://lkml.org/lkml/2020/12/1/1658
Reported-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
|
|
Auto-adjust the table columns width to better fit under
terminals, by breaking the description on multiple lines
and auto-estimating the minimal size for the
per-architecture status.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/9d39ac3fd51f1360aecc328c01558be88a1d6930.1607095090.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Right now, arch compatibility is grouped by status at the
alphabetical order from A to Z, and then from a to z, e. g:.
---
TODO
ok
Revert the order, in order to print first the OK results,
then TODO, and, finally, the not compatible ones.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/46d53d138eab8e4a55124323ceb5b212c6eedd08.1607095090.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Currently, there are too many white spaces at the tables,
and the information is very sparsed on it.
Make the format a lot more compact.
Suggested-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/8165ff379313e63a69898db19d790e4436224ffd.1607095090.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
While eBPF programs can check whether a file is a socket by file->f_op
== &socket_file_ops, they cannot convert the void private_data pointer
to a struct socket BTF pointer. In order to do this a new helper
wrapping sock_from_file is added.
This is useful to tracing programs but also other program types
inheriting this set of helpers such as iterators or LSM programs.
Signed-off-by: Florent Revest <revest@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: KP Singh <kpsingh@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201204113609.1850150-2-revest@google.com
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-12-03
The main changes are:
1) Support BTF in kernel modules, from Andrii.
2) Introduce preferred busy-polling, from Björn.
3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh.
4) Memcg-based memory accounting for bpf objects, from Roman.
5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits)
selftests/bpf: Fix invalid use of strncat in test_sockmap
libbpf: Use memcpy instead of strncpy to please GCC
selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module
selftests/bpf: Add tp_btf CO-RE reloc test for modules
libbpf: Support attachment of BPF tracing programs to kernel modules
libbpf: Factor out low-level BPF program loading helper
bpf: Allow to specify kernel module BTFs when attaching BPF programs
bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier
selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF
selftests/bpf: Add support for marking sub-tests as skipped
selftests/bpf: Add bpf_testmod kernel module for testing
libbpf: Add kernel module BTF support for CO-RE relocations
libbpf: Refactor CO-RE relocs to not assume a single BTF object
libbpf: Add internal helper to load BTF data by FD
bpf: Keep module's btf_data_size intact after load
bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address()
selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP
bpf: Adds support for setting window clamp
samples/bpf: Fix spelling mistake "recieving" -> "receiving"
bpf: Fix cold build of test_progs-no_alu32
...
====================
Link: https://lore.kernel.org/r/20201204021936.85653-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into mlx5-next
Auxiliary Bus support tag for 5.11-rc1
This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tag 'auxbus-5.11-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: auxiliary bus: minor coding style tweaks
driver core: auxiliary bus: make remove function return void
driver core: auxiliary bus: move slab.h from include file
Add auxiliary bus support
|
|
Add support for the Auxiliary Bus, auxiliary_device and auxiliary_driver.
It enables drivers to create an auxiliary_device and bind an
auxiliary_driver to it.
The bus supports probe/remove shutdown and suspend/resume callbacks.
Each auxiliary_device has a unique string based id; driver binds to
an auxiliary_device based on this id through the bus.
Co-developed-by: Kiran Patil <kiran.patil@intel.com>
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Co-developed-by: Fred Oh <fred.oh@linux.intel.com>
Co-developed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Martin Habets <mhabets@solarflare.com>
Link: https://lore.kernel.org/r/20201113161859.1775473-2-david.m.ertman@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/160695681289.505290.8978295443574440604.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Conflicts:
drivers/net/ethernet/ibm/ibmvnic.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Changeset 6b80975c6308 ("scripts: kernel-doc: fix typedef parsing")
added support for things like:
typedef unsigned long foo();
However, it caused a regression on this prototype:
typedef bool v4l2_check_dv_timings_fnc(const struct v4l2_dv_timings *t, void *handle);
This is only noticed after adding a patch that checks if the
kernel-doc identifier matches the typedef:
./scripts/kernel-doc -none $(git grep '^.. kernel-doc::' Documentation/ |cut -d ' ' -f 3|sort|uniq) 2>&1|grep expecting
include/media/v4l2-dv-timings.h:38: warning: expecting prototype for typedef v4l2_check_dv_timings_fnc. Prototype was for typedef nc instead
The problem is that, with the new parsing logic, it is not
checking for complete words at the type part.
Fix it by adding a \b at the end of each type word at the
regex.
fixes: 6b80975c6308 ("scripts: kernel-doc: fix typedef parsing")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/218ff56dcb8e73755005d3fb64586eb1841a276b.1606896997.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Add support for the same output format as the bash script,
and use its implementation instead of the previous one.
I opted to do such patch in order to have a single script
responsible for parsing Documentation/features and
produce different outputs.
As someone may rely on the past format, which is easy
to parse it, get_feat.pl now gains a new command with
the same output format as the previous script.
As a side effect, the perl script is a lot faster, as it reads
each file only once, instead of parsing files several times
via a for command and grep commands inside it.
This patch also changes the features list order to be
case-insensitive, in order to better match the output of
the existing script.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/a97f49677805ad4e6b982d02c0db8c9dfbbd20a6.1606748711.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
Instead of producing a too wide table, let's split it per
subsystem, and use a better notation in order to make easier
for the reader to identify how a feature is supported on
multiple architectures.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/9c3e8c813e8146c5c30e10fa75974f8fbfe6016a.1606748711.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
The Documentation/features contains a set of parseable files.
It is not worth converting them to ReST format, as they're
useful the way it is. It is, however, interesting to parse
them and produce output on different formats:
1) Output the contents of a feature in ReST format;
2) Output what features a given architecture supports;
3) Output a matrix with features x architectures.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/8b0c1ad06d689283a6d78c4ccd188a02c3acc0de.1606748711.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
ld.lld 10.0.1 spews a bunch of various warnings about .rela sections,
along with a few others. Newer versions of ld.lld do not have these
warnings. As a result, do not add '--orphan-handling=warn' to
LDFLAGS_vmlinux if ld.lld's version is not new enough.
Link: https://github.com/ClangBuiltLinux/linux/issues/1187
Link: https://github.com/ClangBuiltLinux/linux/issues/1193
Reported-by: Arvind Sankar <nivedita@alum.mit.edu>
Reported-by: kernelci.org bot <bot@kernelci.org>
Reported-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Remove unused OBJSIZE variable.
- Fix rootless deb-pkg build in a setgid directory.
* tag 'kbuild-fixes-v5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
builddeb: Fix rootless build in setuid/setgid directory
kbuild: remove unused OBJSIZE
|
|
Provide a wrapper function to get the IMA hash of an inode. This helper
is useful in fingerprinting files (e.g executables on execution) and
using these fingerprints in detections like an executable unlinking
itself.
Since the ima_inode_hash can sleep, it's only allowed for sleepable
LSM hooks.
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20201124151210.1081188-3-kpsingh@chromium.org
|
|
In some modes of operation, Kbuild allows to build modules without having
vmlinux image around. In such case, generation of module BTF is impossible.
This patch changes the behavior to emit a warning about impossibility of
generating kernel module BTF, instead of breaking the build. This is especially
important for out-of-tree external module builds.
In vmlinux-less mode:
$ make clean
$ make modules_prepare
$ touch drivers/acpi/button.c
$ make M=drivers/acpi
...
CC [M] drivers/acpi/button.o
MODPOST drivers/acpi/Module.symvers
LD [M] drivers/acpi/button.ko
BTF [M] drivers/acpi/button.ko
Skipping BTF generation for drivers/acpi/button.ko due to unavailability of vmlinux
...
$ readelf -S ~/linux-build/default/drivers/acpi/button.ko | grep BTF -A1
... empty ...
Now with normal build:
$ make all
...
LD [M] drivers/acpi/button.ko
BTF [M] drivers/acpi/button.ko
...
$ readelf -S ~/linux-build/default/drivers/acpi/button.ko | grep BTF -A1
[60] .BTF PROGBITS 0000000000000000 00029310
000000000000ab3f 0000000000000000 0 0 1
Fixes: 5f9ae91f7c0d ("kbuild: Build kernel module BTFs if BTF is enabled and pahole supports it")
Reported-by: Bruce Allan <bruce.w.allan@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Link: https://lore.kernel.org/bpf/20201121070829.2612884-1-andrii@kernel.org
|
|
This warning behaves differently depending on the architecture
and compiler. Using x86 gcc, we get no output at all because
gcc knows the architecture can handle unaligned accesses.
Using x86 clang, or gcc on an architecture that needs to
manually deal with unaligned accesses, the build log is
completely flooded with these warnings, as they are commonly
invoked by inline functions of networking headers, e.g.
include/linux/skbuff.h:1426:26: warning: cast increases required alignment of target type [-Wcast-align]
The compiler is correct to point this out, as we are dealing
with undefined behavior that does cause problems in practice,
but there is also no good way to rewrite the code in commonly
included headers to a safer method.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Currently the kernel minimal compiler requirement is gcc 4.9 or
clang 10.0.1.
* gcc -mhotpatch option is supported since 4.8.
* A combination of -pg -mrecord-mcount -mnop-mcount -mfentry flags is
supported since gcc 9 and since clang 10.
Drop support for old -pg function prologues. Which leaves binary
compatible -mhotpatch / -mnop-mcount -mfentry prologues in a form:
brcl 0,0
Which are also do not require initial nop optimization / conversion and
presence of _mcount symbol.
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
|
|
The helper allows modification of certain bits on the linux_binprm
struct starting with the secureexec bit which can be updated using the
BPF_F_BPRM_SECUREEXEC flag.
secureexec can be set by the LSM for privilege gaining executions to set
the AT_SECURE auxv for glibc. When set, the dynamic linker disables the
use of certain environment variables (like LD_PRELOAD).
Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20201117232929.2156341-1-kpsingh@chromium.org
|
|
Daniel Borkmann says:
====================
pull-request: bpf-next 2020-11-14
1) Add BTF generation for kernel modules and extend BTF infra in kernel
e.g. support for split BTF loading and validation, from Andrii Nakryiko.
2) Support for pointers beyond pkt_end to recognize LLVM generated patterns
on inlined branch conditions, from Alexei Starovoitov.
3) Implements bpf_local_storage for task_struct for BPF LSM, from KP Singh.
4) Enable FENTRY/FEXIT/RAW_TP tracing program to use the bpf_sk_storage
infra, from Martin KaFai Lau.
5) Add XDP bulk APIs that introduce a defer/flush mechanism to optimize the
XDP_REDIRECT path, from Lorenzo Bianconi.
6) Fix a potential (although rather theoretical) deadlock of hashtab in NMI
context, from Song Liu.
7) Fixes for cross and out-of-tree build of bpftool and runqslower allowing build
for different target archs on same source tree, from Jean-Philippe Brucker.
8) Fix error path in htab_map_alloc() triggered from syzbot, from Eric Dumazet.
9) Move functionality from test_tcpbpf_user into the test_progs framework so it
can run in BPF CI, from Alexander Duyck.
10) Lift hashtab key_size limit to be larger than MAX_BPF_STACK, from Florian Lehner.
Note that for the fix from Song we have seen a sparse report on context
imbalance which requires changes in sparse itself for proper annotation
detection where this is currently being discussed on linux-sparse among
developers [0]. Once we have more clarification/guidance after their fix,
Song will follow-up.
[0] https://lore.kernel.org/linux-sparse/CAHk-=wh4bx8A8dHnX612MsDO13st6uzAz1mJ1PaHHVevJx_ZCw@mail.gmail.com/T/
https://lore.kernel.org/linux-sparse/20201109221345.uklbp3lzgq6g42zb@ltop.local/T/
* git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (66 commits)
net: mlx5: Add xdp tx return bulking support
net: mvpp2: Add xdp tx return bulking support
net: mvneta: Add xdp tx return bulking support
net: page_pool: Add bulk support for ptr_ring
net: xdp: Introduce bulking for xdp tx return path
bpf: Expose bpf_d_path helper to sleepable LSM hooks
bpf: Augment the set of sleepable LSM hooks
bpf: selftest: Use bpf_sk_storage in FENTRY/FEXIT/RAW_TP
bpf: Allow using bpf_sk_storage in FENTRY/FEXIT/RAW_TP
bpf: Rename some functions in bpf_sk_storage
bpf: Folding omem_charge() into sk_storage_charge()
selftests/bpf: Add asm tests for pkt vs pkt_end comparison.
selftests/bpf: Add skb_pkt_end test
bpf: Support for pointers beyond pkt_end.
tools/bpf: Always run the *-clean recipes
tools/bpf: Add bootstrap/ to .gitignore
bpf: Fix NULL dereference in bpf_task_storage
tools/bpftool: Fix build slowdown
tools/runqslower: Build bpftool using HOSTCC
tools/runqslower: Enable out-of-tree build
...
====================
Link: https://lore.kernel.org/r/20201114020819.29584-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The commit d38c8cfb0571 ("scripts: kernel-doc: add support for typedef enum")
broke anonymous enum parsing. Restore it by relying on members rather than
its name.
Fixes: d38c8cfb0571 ("scripts: kernel-doc: add support for typedef enum")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Cc: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/20201102170637.36138-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Current release - regressions:
- arm64: dts: fsl-ls1028a-kontron-sl28: specify in-band mode for
ENETC
Current release - bugs in new features:
- mptcp: provide rmem[0] limit offset to fix oops
Previous release - regressions:
- IPv6: Set SIT tunnel hard_header_len to zero to fix path MTU
calculations
- lan743x: correctly handle chips with internal PHY
- bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE
- mlx5e: Fix VXLAN port table synchronization after function reload
Previous release - always broken:
- bpf: Zero-fill re-used per-cpu map element
- fix out-of-order UDP packets when forwarding with UDP GSO fraglists
turned on:
- fix UDP header access on Fast/frag0 UDP GRO
- fix IP header access and skb lookup on Fast/frag0 UDP GRO
- ethtool: netlink: add missing netdev_features_change() call
- net: Update window_clamp if SOCK_RCVBUF is set
- igc: Fix returning wrong statistics
- ch_ktls: fix multiple leaks and corner cases in Chelsio TLS offload
- tunnels: Fix off-by-one in lower MTU bounds for ICMP/ICMPv6 replies
- r8169: disable hw csum for short packets on all chip versions
- vrf: Fix fast path output packet handling with async Netfilter
rules"
* tag 'net-5.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (65 commits)
lan743x: fix use of uninitialized variable
net: udp: fix IP header access and skb lookup on Fast/frag0 UDP GRO
net: udp: fix UDP header access on Fast/frag0 UDP GRO
devlink: Avoid overwriting port attributes of registered port
vrf: Fix fast path output packet handling with async Netfilter rules
cosa: Add missing kfree in error path of cosa_write
net: switch to the kernel.org patchwork instance
ch_ktls: stop the txq if reaches threshold
ch_ktls: tcb update fails sometimes
ch_ktls/cxgb4: handle partial tag alone SKBs
ch_ktls: don't free skb before sending FIN
ch_ktls: packet handling prior to start marker
ch_ktls: Correction in middle record handling
ch_ktls: missing handling of header alone
ch_ktls: Correction in trimmed_len calculation
cxgb4/ch_ktls: creating skbs causes panic
ch_ktls: Update cheksum information
ch_ktls: Correction in finding correct length
cxgb4/ch_ktls: decrypted bit is not enough
net/x25: Fix null-ptr-deref in x25_connect
...
|
|
Detect if pahole supports split BTF generation, and generate BTF for each
selected kernel module, if it does. This is exposed to Makefiles and C code as
CONFIG_DEBUG_INFO_BTF_MODULES flag.
Kernel module BTF has to be re-generated if either vmlinux's BTF changes or
module's .ko changes. To achieve that, I needed a helper similar to
if_changed, but that would allow to filter out vmlinux from the list of
updated dependencies for .ko building. I've put it next to the only place that
uses and needs it, but it might be a better idea to just add it along the
other if_changed variants into scripts/Kbuild.include.
Each kernel module's BTF deduplication is pretty fast, as it does only
incremental BTF deduplication on top of already deduplicated vmlinux BTF. To
show the added build time, I've first ran make only just built kernel (to
establish the baseline) and then forced only BTF re-generation, without
regenerating .ko files. The build was performed with -j60 parallelization on
56-core machine. The final time also includes bzImage building, so it's not
a pure BTF overhead.
$ time make -j60
...
make -j60 27.65s user 10.96s system 782% cpu 4.933 total
$ touch ~/linux-build/default/vmlinux && time make -j60
...
make -j60 123.69s user 27.85s system 1566% cpu 9.675 total
So 4.6 seconds real time, with noticeable part spent in compressed vmlinux and
bzImage building.
To show size savings, I've built my kernel configuration with about 700 kernel
modules with full BTF per each kernel module (without deduplicating against
vmlinux) and with split BTF against deduplicated vmlinux (approach in this
patch). Below are top 10 modules with biggest BTF sizes. And total size of BTF
data across all kernel modules.
It shows that split BTF "compresses" 115MB down to 5MB total. And the biggest
kernel modules get a downsize from 500-570KB down to 200-300KB.
FULL BTF
========
$ for f in $(find . -name '*.ko'); do size -A -d $f | grep BTF | awk '{print $2}'; done | awk '{ s += $1 } END { print s }'
115710691
$ for f in $(find . -name '*.ko'); do printf "%s %d\n" $f $(size -A -d $f | grep BTF | awk '{print $2}'); done | sort -nr -k2 | head -n10
./drivers/gpu/drm/i915/i915.ko 570570
./drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.ko 520240
./drivers/gpu/drm/radeon/radeon.ko 503849
./drivers/infiniband/hw/mlx5/mlx5_ib.ko 491777
./fs/xfs/xfs.ko 411544
./drivers/net/ethernet/intel/i40e/i40e.ko 403904
./drivers/net/ethernet/broadcom/bnx2x/bnx2x.ko 398754
./drivers/infiniband/core/ib_core.ko 397224
./fs/cifs/cifs.ko 386249
./fs/nfsd/nfsd.ko 379738
SPLIT BTF
=========
$ for f in $(find . -name '*.ko'); do size -A -d $f | grep BTF | awk '{print $2}'; done | awk '{ s += $1 } END { print s }'
5194047
$ for f in $(find . -name '*.ko'); do printf "%s %d\n" $f $(size -A -d $f | grep BTF | awk '{print $2}'); done | sort -nr -k2 | head -n10
./drivers/gpu/drm/i915/i915.ko 293206
./drivers/gpu/drm/radeon/radeon.ko 282103
./fs/xfs/xfs.ko 222150
./drivers/net/ethernet/mellanox/mlx5/core/mlx5_core.ko 198503
./drivers/infiniband/hw/mlx5/mlx5_ib.ko 198356
./drivers/net/ethernet/broadcom/bnx2x/bnx2x.ko 113444
./fs/cifs/cifs.ko 109379
./arch/x86/kvm/kvm.ko 100225
./drivers/gpu/drm/drm.ko 94827
./drivers/infiniband/core/ib_core.ko 91188
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201110011932.3201430-4-andrii@kernel.org
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core documentation fixes from Greg KH:
"Some small Documentation fixes that were fallout from the larger
documentation update we did in 5.10-rc2.
Nothing major here at all, but all of these have been in linux-next
and resolve build warnings when building the documentation files"
* tag 'driver-core-5.10-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation: remove mic/index from misc-devices/index.rst
scripts: get_api.pl: Add sub-titles to ABI output
scripts: get_abi.pl: Don't let ABI files to create subtitles
docs: leds: index.rst: add a missing file
docs: ABI: sysfs-class-net: fix a typo
docs: ABI: sysfs-driver-dma-ioatdma: what starts with /sys
|
|
The include/asm-generic/atomic-instrumented.h checksum got out
of sync, so regenerate it. (No change to actual code.)
Also make scripts/atomic/gen-atomics.sh executable, to make
it easier to use.
The auto-generated atomic header signatures are now fine:
thule:~/tip> scripts/atomic/check-atomics.sh
thule:~/tip>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: linux-kernel@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Conflicts:
include/asm-generic/atomic-instrumented.h
kernel/kprobes.c
Use the upstream atomic-instrumented.h checksum, and pick
the kprobes version of kernel/kprobes.c, which effectively
reverts this upstream workaround:
645f224e7ba2: ("kprobes: Tell lockdep about kprobe nesting")
Since the new code *should* be fine without nesting.
Knock on wood ...
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Merge recent kprobes updates into perf/kprobes that came from -mm.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2020-11-06
1) Pre-allocated per-cpu hashmap needs to zero-fill reused element, from David.
2) Tighten bpf_lsm function check, from KP.
3) Fix bpftool attaching to flow dissector, from Lorenz.
4) Use -fno-gcse for the whole kernel/bpf/core.c instead of function attribute, from Ard.
* git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Update verification logic for LSM programs
bpf: Zero-fill re-used per-cpu map element
bpf: BPF_PRELOAD depends on BPF_SYSCALL
tools/bpftool: Fix attaching flow dissector
libbpf: Fix possible use after free in xsk_socket__delete
libbpf: Fix null dereference in xsk_socket__delete
libbpf, hashmap: Fix undefined behavior in hash_bits
bpf: Don't rely on GCC __attribute__((optimize)) to disable GCSE
tools, bpftool: Remove two unused variables.
tools, bpftool: Avoid array index warnings.
xsk: Fix possible memory leak at socket close
bpf: Add struct bpf_redir_neigh forward declaration to BPF helper defs
samples/bpf: Set rlimit for memlock to infinity in all samples
bpf: Fix -Wshadow warnings
selftest/bpf: Fix profiler test using CO-RE relocation for enums
====================
Link: https://lore.kernel.org/r/20201106221759.24143-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull documentation build warning fixes from Jonathan Corbet:
"This contains a series of warning fixes from Mauro; once applied, the
number of warnings from the once-noisy docs build process is nearly
zero.
Getting to this point has required a lot of work; once there,
hopefully we can keep things that way.
I have packaged this as a separate pull because it does a fair amount
of reaching outside of Documentation/. The changes are all in comments
and in code placement. It's all been in linux-next since last week"
* tag 'docs-5.10-warnings' of git://git.lwn.net/linux: (24 commits)
docs: SafeSetID: fix a warning
amdgpu: fix a few kernel-doc markup issues
selftests: kselftest_harness.h: fix kernel-doc markups
drm: amdgpu_dm: fix a typo
gpu: docs: amdgpu.rst: get rid of wrong kernel-doc markups
drm: amdgpu: kernel-doc: update some adev parameters
docs: fs: api-summary.rst: get rid of kernel-doc include
IB/srpt: docs: add a description for cq_size member
locking/refcount: move kernel-doc markups to the proper place
docs: lockdep-design: fix some warning issues
MAINTAINERS: fix broken doc refs due to yaml conversion
ice: docs fix a devlink info that broke a table
crypto: sun8x-ce*: update entries to its documentation
net: phy: remove kernel-doc duplication
mm: pagemap.h: fix two kernel-doc markups
blk-mq: docs: add kernel-doc description for a new struct member
docs: userspace-api: add iommu.rst to the index file
docs: hwmon: mp2975.rst: address some html build warnings
docs: net: statistics.rst: remove a duplicated kernel-doc
docs: kasan.rst: add two missing blank lines
...
|
|
Pull documentation fixes from Jonathan Corbet:
"A small number of fixes, plus a build tweak to respect the desire for
silence in V=0 builds"
* tag 'docs-5.10-3' of git://git.lwn.net/linux:
docs: fix automarkup regression on Python 2
documentation: arm: sunxi: add Allwinner H6 documents
scripts: kernel-doc: split typedef complex regex
scripts: kernel-doc: fix typedef parsing
docs: Makefile: honor V=0 for docs building
|
|
Instead of adding titles just for the files, add titles
for each part of the ABI output, in order to make easier
to search for a symbol there.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/64752a5de06ab8263c296e3ed01414b25861e1eb.1604312590.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ReST output should only contain documentation titles
automatically created by the script.
There are two reasons for that:
1) Consistency.
just a handful ABI docs define titles
2) To avoid critical errors.
Docutils (which is the basis for Sphinx) allows a free
assign of documentation title markups. So, one document
could be doing things like:
Level 1
=======
Level 2
-------
While another one could do the reverse:
Level 1
-------
Level 2
=======
But the same document can't mix.
As the output of get_abi.pl will join contents from multiple
files, if they don't define the levels on a consistent errors,
errors like this can happen:
Sphinx parallel build error:
docutils.utils.SystemMessage: /home/rdunlap/lnx/lnx-510-rc2/Documentation/ABI/testing/sysfs-bus-rapidio:2: (SEVERE/4) Title level inconsistent:
Attributes Common for All RapidIO Devices
-----------------------------------------
Which cause some versions of Sphinx to go into an endless
loop.
It should be noticed that an alternative to that would
be to replace all title occurrences by a single markup,
but that will make the parser more complex, and, due to
(1) it would generate an inconsistent output.
So, better to just remove the titles defined at the ABI
files from the output.
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/6c62ef5c01d39dee8d891f8390c816d2a889670a.1604312590.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Building 5.10-rc1 in a setgid directory failed with the following
error:
dpkg-deb: error: control directory has bad permissions 2755 (must be
>=0755 and <=0775)
When building with fakeroot, the earlier chown call would have removed
the setgid bits, but in a rootless build they remain.
Fixes: 3e8541803624 ("builddeb: Enable rootless builds")
Cc: Guillem Jover <guillem@hadrons.org>
Signed-off-by: Sven Joachim <svenjoac@gmx.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
All ABI files are now compatible with ReST format. So, change
the script default to assume that the ABI source files
are compatible with ReST.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/4b0af257010570e0e917d82498e42992bec5e173.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are some ABI documents that, while they don't generate
any warnings, they have issues when parsed by get_abi.pl script
on its output result.
Address them, in order to provide a clean output.
Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager
Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO
Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs
Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The files under Documentation/ABI should follow the syntax
as defined at Documentation/ABI/README.
Allow checking if they're following the syntax by running
the ABI parser script on COMPILE_TEST.
With that, when there's a problem with a file under
Documentation/ABI, it would produce a warning like:
Warning: file ./Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats#14:
What '/sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_cor' doesn't have a description
Warning: file ./Documentation/ABI/testing/sysfs-bus-pci-devices-aer_stats#21:
What '/sys/bus/pci/devices/<dev>/aer_stats/aer_rootport_total_err_fatal' doesn't have a description
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/57a38de85cb4b548857207cf1fc1bf1ee08613c9.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are several cross-references that can be automatically
generated:
- References to .rst files inside Documentation/
- References to other ABI files;
- References to ABI symbols at /sys/*.
Add a logic to automatically parse them and convert into
cross references.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/abe756d4f94fb6ffcc3dd3902a766c7c3990ea89.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
As we're using tables, let's distinguish the ones used by ABI
by using a bold font.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/9ed645c2519169817379c1df5b8cf03828e92520.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The same filename may exist on multiple directories within
ABI. Create separate entries at the internal database for
each of them.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/ef760f68f54e132c4be52f0027189b4ba31554ec.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Right now, the script only outputs Users on search. Print it
also in ReST format.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/83def2a692c4c678f21ee6e76b66a54d2be1e796.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The ABI should define only once each What. The current script
logic assumes that.
However, that's not the case, currently: there are several
symbols with a generic definition, and per-driver ones.
Better handle such cases, by preserving the cross-references
with the files that define them, but also track such
cases, producing warnings, as they should be fixed.
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/d7a73b8b3aae5b2bff9279996ff9ca4cdfc89196.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
