| Age | Commit message (Collapse) | Author |
|---|
|
fstat is replaced by statx on the new architecture, so an exception is
added to the checksyscalls script to silence the following build warning
on LoongArch:
CALL scripts/checksyscalls.sh
<stdin>:569:2: warning: #warning syscall fstat not implemented [-Wcpp]
Link: https://lkml.kernel.org/r/1678175940-20872-1-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Suggested-by: WANG Xuerui <kernel@xen0n.name>
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git")
added a new tool, scripts/list-gitignored. My intention was to create
source packages without cleaning the source tree, without relying on git.
Linus strongly objected to it, and suggested using 'git archive' instead.
[1] [2] [3]
This commit goes in that direction - Remove scripts/list-gitignored.c
and rewrites Makefiles and scripts to use 'git archive' for building
Debian and RPM source packages. It also makes 'make perf-tar*-src-pkg'
use 'git archive' again.
Going forward, building source packages is only possible in a git-managed
tree. Building binary packages does not require git.
[1]: https://lore.kernel.org/lkml/CAHk-=wi49sMaC7vY1yMagk7eqLK=1jHeHQ=yZ_k45P=xBccnmA@mail.gmail.com/
[2]: https://lore.kernel.org/lkml/CAHk-=wh5AixGsLeT0qH2oZHKq0FLUTbyTw4qY921L=PwYgoGVw@mail.gmail.com/
[3]: https://lore.kernel.org/lkml/CAHk-=wgM-W6Fu==EoAVCabxyX8eYBz9kNC88-tm9ExRQwA79UQ@mail.gmail.com/
Fixes: 5c3d1d0abb12 ("kbuild: add a tool to list files ignored by git")
Fixes: e0ca16749ac3 ("kbuild: make perf-tar*-src-pkg work without relying on git")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Prepare to add more files to the source RPM.
Also, fix the build error when KCONFIG_CONFIG is set:
error: Bad file: ./.config: No such file or directory
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Use dh_listpackages to get a list of all binary packages.
With this, debian/control lists which binary packages will be produced.
Previously, ARCH=um listed linux-libc-dev in debian/control, but it
was not generated because each of mkdebian and builddeb independently
maintained the if-conditionals.
Another motivation is to allow scripts/package/builddeb to get the
package name (linux-image-*, etc.) dynamically from debian/control.
This will also allow the BuildProfile to control the generation of
the binary packages.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Prepare for the refactoring in the next commit.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Commit 3ab18a625ce4 ("kbuild: deb-pkg: improve the usability of source
package") set needless CROSS_COMPILE.
For example, 'make allnoconfig bindeb-pkg' on a x86_64 system will set
CROSS_COMPILE=i686-linux-gnu-, where the biarch compiler 'gcc' should
work for building the i386 kernel.
$ uname -m
x86_64
$ make allnoconfig bindeb-pkg >/dev/null
dpkg-architecture: warning: specified GNU system type i686-linux-gnu does not match CC system type x86_64-linux-gnu, try setting a correct CC environment variable
dpkg-source --before-build .
debian/rules binary
scripts/Kconfig.include:39: C compiler 'i686-linux-gnu-gcc' not found
make[6]: *** [scripts/kconfig/Makefile:77: olddefconfig] Error 1
make[5]: *** [Makefile:693: olddefconfig] Error 2
make[4]: *** [Makefile:358: __build_one_by_one] Error 2
make[3]: *** [debian/rules:7: build-arch] Error 2
dpkg-buildpackage: error: debian/rules binary subprocess returned exit status 2
make[2]: *** [scripts/Makefile.package:127: bindeb-pkg] Error 2
make[1]: *** [Makefile:1657: bindeb-pkg] Error 2
make: *** [Makefile:358: __build_one_by_one] Error 2
Check whether CROSS_COMPILE is defined, instead of whether it is non-empty.
If you invoke debian/rules via Kbuild, CROSS_COMPILE is always defined
in the top Makefile.
Fixes: 3ab18a625ce4 ("kbuild: deb-pkg: improve the usability of source package")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
KERNELRELEASE does not need to match the package version in changelog.
Rather, it conventially matches what is called 'ABINAME', which is a
part of the binary package names.
Both are the same by default, but the former might be overridden by
KDEB_PKGVERSION. In this case, the resulting package would not boot
because /lib/modules/$(uname -r) does not point the module directory.
Partially revert 3ab18a625ce4 ("kbuild: deb-pkg: improve the usability
of source package").
Reported-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Fixes: 3ab18a625ce4 ("kbuild: deb-pkg: improve the usability of source package")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
|
|
Since commit c5bf2efb058d ("kbuild: deb-pkg: fix binary-arch and clean
in debian/rules"), the source package generated by 'make deb-pkg' fails
to build.
I terribly missed the fact that the intdeb-pkg target may regenerate
include/config/kernel.release due to the following in the top Makefile:
%pkg: include/config/kernel.release FORCE
Restore KERNELRELEASE= option to avoid the kernel.release disagreement
between build-arch and binary-arch.
Fixes: c5bf2efb058d ("kbuild: deb-pkg: fix binary-arch and clean in debian/rules")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Prior to commit 5ee546594025 ("kconfig: change sym_change_count to a
boolean flag"), the conf_updated flag was set to the new value *before*
calling the callback. xconfig's save action depends on this behaviour,
because xconfig calls conf_get_changed() directly from the callback and
now sees the old value, thus never enabling the save button or the
shortcut.
Restore the previous behaviour.
Fixes: 5ee546594025 ("kconfig: change sym_change_count to a boolean flag")
Signed-off-by: Jurica Vukadin <jura@vukad.in>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
My randconfig build setup ran into another kallsyms warning:
Inconsistent kallsyms data
Try make KALLSYMS_EXTRA_PASS=1 as a workaround
After adding some debugging code to kallsyms.c, I saw that the recently
added kallsyms_seqs_of_names symbol can sometimes cause the second stage
table to be slightly longer than the first stage, which makes the
build inconsistent.
Add it to the exception table that contains all other kallsyms-generated
symbols.
Fixes: 60443c88f3a8 ("kallsyms: Improve the performance of kallsyms_lookup_name()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
include/linux/compiler-intel.h had no update in the past 3 years.
We often forget about the third C compiler to build the kernel.
For example, commit a0a12c3ed057 ("asm goto: eradicate CC_HAS_ASM_GOTO")
only mentioned GCC and Clang.
init/Kconfig defines CC_IS_GCC and CC_IS_CLANG but not CC_IS_ICC,
and nobody has reported any issue.
I guess the Intel Compiler support is broken, and nobody is caring
about it.
Harald Arnesen pointed out ICC (classic Intel C/C++ compiler) is
deprecated:
$ icc -v
icc: remark #10441: The Intel(R) C++ Compiler Classic (ICC) is
deprecated and will be removed from product release in the second half
of 2023. The Intel(R) oneAPI DPC++/C++ Compiler (ICX) is the recommended
compiler moving forward. Please transition to use this compiler. Use
'-diag-disable=10441' to disable this message.
icc version 2021.7.0 (gcc version 12.1.0 compatibility)
Arnd Bergmann provided a link to the article, "Intel C/C++ compilers
complete adoption of LLVM".
lib/zstd/common/compiler.h and lib/zstd/compress/zstd_fast.c were kept
untouched for better sync with https://github.com/facebook/zstd
Link: https://www.intel.com/content/www/us/en/developer/articles/technical/adoption-of-llvm-complete-icx.html
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"17 hotfixes.
Eight are for MM and seven are for other parts of the kernel. Seven
are cc:stable and eight address post-6.3 issues or were judged
unsuitable for -stable backporting"
* tag 'mm-hotfixes-stable-2023-03-04-13-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mailmap: map Dikshita Agarwal's old address to his current one
mailmap: map Vikash Garodia's old address to his current one
fs/cramfs/inode.c: initialize file_ra_state
fs: hfsplus: fix UAF issue in hfsplus_put_super
panic: fix the panic_print NMI backtrace setting
lib: parser: update documentation for match_NUMBER functions
kasan, x86: don't rename memintrinsics in uninstrumented files
kasan: test: fix test for new meminstrinsic instrumentation
kasan: treat meminstrinsic as builtins in uninstrumented files
kasan: emit different calls for instrumentable memintrinsics
ocfs2: fix non-auto defrag path not working issue
ocfs2: fix defrag path triggering jbd2 ASSERT
mailmap: map Georgi Djakov's old Linaro address to his current one
mm/hwpoison: convert TTU_IGNORE_HWPOISON to TTU_HWPOISON
lib/zlib: DFLTCC deflate does not write all available bits for Z_NO_FLUSH
mm/damon/paddr: fix missing folio_put()
mm/mremap: fix dup_anon_vma() in vma_merge() case 4
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux
Pull coccinelle updates from Julia Lawall:
"Changes in make coccicheck and improve a semantic patch
This makes a couple of changes in make coccicheck related to shell
commands.
It also updates the api/atomic_as_refcounter semantic patch to include
WARNING in the output message, as done in other cases"
* tag 'cocci-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
scripts: coccicheck: Use /usr/bin/env
scripts: coccicheck: Avoid warning about spurious escape
coccinelle: api/atomic_as_refcounter: include message type in output
|
|
Where the compiler instruments meminstrinsics by generating calls to
__asan/__hwasan_ prefixed functions, let the compiler consider
memintrinsics as builtin again.
To do so, never override memset/memmove/memcpy if the compiler does the
correct instrumentation - even on !GENERIC_ENTRY architectures.
[elver@google.com: powerpc: don't rename memintrinsics if compiler adds prefixes]
Link: https://lore.kernel.org/all/20230224085942.1791837-1-elver@google.com/ [1]
Link: https://lkml.kernel.org/r/20230227094726.3833247-1-elver@google.com
Link: https://lkml.kernel.org/r/20230224085942.1791837-2-elver@google.com
Fixes: 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*() functions")
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc)
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Clang 15 provides an option to prefix memcpy/memset/memmove calls with
__asan_/__hwasan_ in instrumented functions:
https://reviews.llvm.org/D122724
GCC will add support in future:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108777
Use it to regain KASAN instrumentation of memcpy/memset/memmove on
architectures that require noinstr to be really free from instrumented
mem*() functions (all GENERIC_ENTRY architectures).
Link: https://lkml.kernel.org/r/20230224085942.1791837-1-elver@google.com
Fixes: 69d4c0d32186 ("entry, kasan, x86: Disallow overriding mem*() functions")
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Tested-by: Linux Kernel Functional Testing <lkft@linaro.org>
Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Borislav Petkov (AMD) <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jakub Jelinek <jakub@redhat.com>
Cc: kasan-dev@googlegroups.com
Cc: Kees Cook <keescook@chromium.org>
Cc: Linux Kernel Functional Testing <lkft@linaro.org>
Cc: Nathan Chancellor <nathan@kernel.org> # build only
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Change V=1 option to print both short log and full command log
- Allow V=1 and V=2 to be combined as V=12
- Make W=1 detect wrong .gitignore files
- Tree-wide cleanups for unused command line arguments passed to Clang
- Stop using -Qunused-arguments with Clang
- Make scripts/setlocalversion handle only correct release tags instead
of any arbitrary annotated tag
- Create Debian and RPM source packages without cleaning the source
tree
- Various cleanups for packaging
* tag 'kbuild-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (74 commits)
kbuild: rpm-pkg: remove unneeded KERNELRELEASE from modules/headers_install
docs: kbuild: remove description of KBUILD_LDS_MODULE
.gitattributes: use 'dts' diff driver for *.dtso files
kbuild: deb-pkg: improve the usability of source package
kbuild: deb-pkg: fix binary-arch and clean in debian/rules
kbuild: tar-pkg: use tar rules in scripts/Makefile.package
kbuild: make perf-tar*-src-pkg work without relying on git
kbuild: deb-pkg: switch over to source format 3.0 (quilt)
kbuild: deb-pkg: make .orig tarball a hard link if possible
kbuild: deb-pkg: hide KDEB_SOURCENAME from Makefile
kbuild: srcrpm-pkg: create source package without cleaning
kbuild: rpm-pkg: build binary packages from source rpm
kbuild: deb-pkg: create source package without cleaning
kbuild: add a tool to list files ignored by git
Documentation/llvm: add Chimera Linux, Google and Meta datacenters
setlocalversion: use only the correct release tag for git-describe
setlocalversion: clean up the construction of version output
.gitignore: ignore *.cover and *.mbx
kbuild: remove --include-dir MAKEFLAG from top Makefile
kbuild: fix trivial typo in comment
...
|
|
This is a temporary workaround added by commit f6e09b07cc12 ("kbuild:
do not put .scmversion into the source tarball").
Since commit 1cb86b6c3136 ("kbuild: save overridden KERNELRELEASE in
include/config/kernel.release"), the user-supplied KERNELRELEASE is
saved in include/config/kernel.release.
Remove it again.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
|
|
Improve the source package support in case the dpkg-buildpackage is
directly used to build binary packages.
For cross-compiling, you can set CROSS_COMPILE via the environment
variable, but it is better to set it automatically - set it to
${DEB_HOST_GNU_TYPE}- if we are cross-compiling but not from the top
Makefile.
The generated source package may be carried to a different build
environment, which may have a different compiler installed.
Run olddefconfig first to set new CONFIG options to their default
values without prompting.
Take KERNELRELEASE and KBUILD_BUILD_VERSION from the version field of
debian/changelog in case it is updated afterwards.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The clean target needs ARCH=${ARCH} to clean up the tree for the correct
architecture. 'make (bin)deb-pkg' skips cleaning, but the preclean hook
may be executed if dpkg-buildpackage is directly used.
The binary-arch target does not need KERNELRELEASE because it is not
updated during the installation. KBUILD_BUILD_VERSION is not needed
either because binary-arch does not build vmlinux.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Use %.tar, %.tar.gz, %.tar.bz2, %.tar.xz, %.tar.zst rules in
scripts/Makefile.package.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Currently, perf-tar*-src-pkg only uses 'git archive', but it is better
to make it work without relying on git.
The file, HEAD, which saves the commit hash, will be included in the
tarball only when the source tree is managed by git. The git tree is
more precisely checked; it has been copied from scripts/setlocalversion.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Change the source format from "1.0" to "3.0 (quilt)" because it works
more cleanly.
All files except .config and debian/ go into the orig tarball.
Add a single patch, debian/patches/config, and delete the ugly
extend-diff-ignore patterns.
The debian tarball will be compressed into *.debian.tar.xz by default.
If you like to use a different compression mode, you can pass the
command line option, DPKG_FLAGS=-Zgzip, for example.
The orig tarball only supports gzip for now. The combination of
gzip and xz is somewhat clumsy, but it is not a practical problem.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
If '..' belongs to the same filesystem, create a hard link instead of
a copy. In most cases, you can save disk space.
I do not want to use 'mv' because keeping linux.tar.gz is useful to
avoid unneeded rebuilding of the tarball.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
scripts/Makefile.package does not need to know the value of
KDEB_SOURCENAME because the source name can be taken from
debian/changelog by using dpkg-parsechangelog.
Move the default of KDEB_SOURCENAME (i.e. linux-upstream) to
scripts/package/mkdebian.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
If you run 'make (src)rpm-pkg', all objects are lost due to 'make clean',
which makes the incremental builds impossible.
Instead of cleaning, pass the exclude list to tar's --exclude-from
option.
Previously, the .config was contained in the source tarball.
With this commit, the source rpm consists of separate linux.tar.gz
and .config.
Remove stale comments. Now, 'make (src)rpm-pkg' works with O= option.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
The build rules of rpm-pkg and srcrpm-pkg are almost the same.
Remove the code duplication.
Change rpm-pkg to build binary packages from the source package generated
by srcrpm-pkg.
This changes the output directory of the srpm generated by 'make rpm-pkg'
because srcrpm-pkg overrides _srcrpmdir.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
If you run 'make deb-pkg', all objects are lost due to 'make clean',
which makes the incremental builds impossible.
Instead of cleaning, pass the exclude list to tar's --exclude-from
option.
Previously, *.diff.gz contained some check-in files such as
.clang-format, .cocciconfig.
With this commit, *.diff.gz will only contain the .config and debian/.
The other source files will go into the .orig tarball.
linux.tar.gz is rebuilt only when the source files that would go into
the tarball are changed.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V updates from Palmer Dabbelt:
"There's a bunch of fixes/cleanups throughout the tree as usual, but we
also have a handful of new features:
- Various improvements to the extension detection and alternative
patching infrastructure
- Zbb-optimized string routines
- Support for cpu-capacity in the RISC-V DT bindings
- Zicbom no longer depends on toolchain support
- Some performance and code size improvements to ftrace
- Support for ARCH_WANT_LD_ORPHAN_WARN
- Oops now contain the faulting instruction"
* tag 'riscv-for-linus-6.3-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (67 commits)
RISC-V: add a spin_shadow_stack declaration
riscv: mm: hugetlb: Enable ARCH_WANT_HUGETLB_PAGE_OPTIMIZE_VMEMMAP
riscv: Add header include guards to insn.h
riscv: alternative: proceed one more instruction for auipc/jalr pair
riscv: Avoid enabling interrupts in die()
riscv, mm: Perform BPF exhandler fixup on page fault
RISC-V: take text_mutex during alternative patching
riscv: hwcap: Don't alphabetize ISA extension IDs
RISC-V: fix ordering of Zbb extension
riscv: jump_label: Fixup unaligned arch_static_branch function
RISC-V: Only provide the single-letter extensions in HWCAP
riscv: mm: fix regression due to update_mmu_cache change
scripts/decodecode: Add support for RISC-V
riscv: Add instruction dump to RISC-V splats
riscv: select ARCH_WANT_LD_ORPHAN_WARN for !XIP_KERNEL
riscv: vmlinux.lds.S: explicitly catch .init.bss sections from EFI stub
riscv: vmlinux.lds.S: explicitly catch .riscv.attributes sections
riscv: vmlinux.lds.S: explicitly catch .rela.dyn symbols
riscv: lds: define RUNTIME_DISCARD_EXIT
RISC-V: move some stray __RISCV_INSN_FUNCS definitions from kprobes
...
|
|
If bash is not located under /bin, coccicheck fails to run. In the real
world, this happens for instance when NixOS is used in the host. Instead,
use /usr/bin/env to locate the executable binary for bash.
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Tested-by: Deepak R Varma <drv@mailo.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
e.g.
grep: warning: stray \ before -
Signed-off-by: Peter Foley <pefoley2@pefoley.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT core:
- Add node lifecycle unit tests
- Add of_property_present() helper aligned with fwnode API
- Print more information on reserved regions on boot
- Update dtc to upstream v1.6.1-66-gabbd523bae6e
- Use strscpy() to instead of strncpy() in DT core
- Add option for schema validation on %.dtb targets
Bindings:
- Add/fix support for listing multiple patterns in DT_SCHEMA_FILES
- Rework external memory controller/bus bindings to properly support
controller specific child node properties
- Convert loongson,ls1x-intc, fcs,fusb302, sil,sii8620, Rockchip
RK3399 PCIe, Synquacer I2C, and Synquacer EXIU bindings to DT
schema format
- Add RiscV SBI PMU event mapping binding
- Add missing contraints on Arm SCMI child node allowed properties
- Add a bunch of missing Socionext UniPhier glue block bindings and
example fixes
- Various fixes for duplicate or conflicting type definitions on DT
properties"
* tag 'devicetree-for-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (66 commits)
dt-bindings: regulator: Add mps,mpq7932 power-management IC
of: dynamic: Fix spelling mistake "kojbect" -> "kobject"
dt-bindings: drop Sagar Kadam from SiFive binding maintainership
dt-bindings: sram: qcom,imem: document sm8450
dt-bindings: interrupt-controller: convert loongson,ls1x-intc.txt to json-schema
dt-bindings: arm: Add Cortex-A715 and X3
of: dynamic: add lifecycle docbook info to node creation functions
of: add consistency check to of_node_release()
of: do not use "%pOF" printk format on node with refcount of zero
of: unittest: add node lifecycle tests
of: update kconfig unittest help
of: add processing of EXPECT_NOT to of_unittest_expect
of: prepare to add processing of EXPECT_NOT to of_unittest_expect
of: Use preferred of_property_read_* functions
of: Use of_property_present() helper
of: Add of_property_present() helper
of: reserved_mem: Use proper binary prefix
dt-bindings: Fix multi pattern support in DT_SCHEMA_FILES
of: reserved-mem: print out reserved-mem details during boot
dt-bindings: serial: restrict possible child node names
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core updates from Greg KH:
"Here is the large set of driver core changes for 6.3-rc1.
There's a lot of changes this development cycle, most of the work
falls into two different categories:
- fw_devlink fixes and updates. This has gone through numerous review
cycles and lots of review and testing by lots of different devices.
Hopefully all should be good now, and Saravana will be keeping a
watch for any potential regression on odd embedded systems.
- driver core changes to work to make struct bus_type able to be
moved into read-only memory (i.e. const) The recent work with Rust
has pointed out a number of areas in the driver core where we are
passing around and working with structures that really do not have
to be dynamic at all, and they should be able to be read-only
making things safer overall. This is the contuation of that work
(started last release with kobject changes) in moving struct
bus_type to be constant. We didn't quite make it for this release,
but the remaining patches will be finished up for the release after
this one, but the groundwork has been laid for this effort.
Other than that we have in here:
- debugfs memory leak fixes in some subsystems
- error path cleanups and fixes for some never-able-to-be-hit
codepaths.
- cacheinfo rework and fixes
- Other tiny fixes, full details are in the shortlog
All of these have been in linux-next for a while with no reported
problems"
[ Geert Uytterhoeven points out that that last sentence isn't true, and
that there's a pending report that has a fix that is queued up - Linus ]
* tag 'driver-core-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (124 commits)
debugfs: drop inline constant formatting for ERR_PTR(-ERROR)
OPP: fix error checking in opp_migrate_dentry()
debugfs: update comment of debugfs_rename()
i3c: fix device.h kernel-doc warnings
dma-mapping: no need to pass a bus_type into get_arch_dma_ops()
driver core: class: move EXPORT_SYMBOL_GPL() lines to the correct place
Revert "driver core: add error handling for devtmpfs_create_node()"
Revert "devtmpfs: add debug info to handle()"
Revert "devtmpfs: remove return value of devtmpfs_delete_node()"
driver core: cpu: don't hand-override the uevent bus_type callback.
devtmpfs: remove return value of devtmpfs_delete_node()
devtmpfs: add debug info to handle()
driver core: add error handling for devtmpfs_create_node()
driver core: bus: update my copyright notice
driver core: bus: add bus_get_dev_root() function
driver core: bus: constify bus_unregister()
driver core: bus: constify some internal functions
driver core: bus: constify bus_get_kset()
driver core: bus: constify bus_register/unregister_notifier()
driver core: remove private pointer from struct bus_type
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver subsystem updates from Greg KH:
"Here is the large set of driver changes for char/misc drivers and
other smaller driver subsystems that flow through this git tree.
Included in here are:
- New IIO drivers and features and improvments in that subsystem
- New hwtracing drivers and additions to that subsystem
- lots of interconnect changes and new drivers as that subsystem
seems under very active development recently. This required also
merging in the icc subsystem changes through this tree.
- FPGA driver updates
- counter subsystem and driver updates
- MHI driver updates
- nvmem driver updates
- documentation updates
- Other smaller driver updates and fixes, full details in the
shortlog
All of these have been in linux-next for a while with no reported
problems"
* tag 'char-misc-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (223 commits)
scripts/tags.sh: fix incompatibility with PCRE2
firmware: coreboot: Remove GOOGLE_COREBOOT_TABLE_ACPI/OF Kconfig entries
mei: lower the log level for non-fatal failed messages
mei: bus: disallow driver match while dismantling device
misc: vmw_balloon: fix memory leak with using debugfs_lookup()
nvmem: stm32: fix OPTEE dependency
dt-bindings: nvmem: qfprom: add IPQ8074 compatible
nvmem: qcom-spmi-sdam: register at device init time
nvmem: rave-sp-eeprm: fix kernel-doc bad line warning
nvmem: stm32: detect bsec pta presence for STM32MP15x
nvmem: stm32: add OP-TEE support for STM32MP13x
nvmem: core: use nvmem_add_one_cell() in nvmem_add_cells_from_of()
nvmem: core: add nvmem_add_one_cell()
nvmem: core: drop the removal of the cells in nvmem_add_cells()
nvmem: core: move struct nvmem_cell_info to nvmem-provider.h
nvmem: core: add an index parameter to the cell
of: property: add #nvmem-cell-cells property
of: property: make #.*-cells optional for simple props
of: base: add of_parse_phandle_with_optional_args()
net: add helper eth_addr_add()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
"There is no particular theme here - mainly quick hits all over the
tree.
Most notable is a set of zlib changes from Mikhail Zaslonko which
enhances and fixes zlib's use of S390 hardware support: 'lib/zlib: Set
of s390 DFLTCC related patches for kernel zlib'"
* tag 'mm-nonmm-stable-2023-02-20-15-29' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (55 commits)
Update CREDITS file entry for Jesper Juhl
sparc: allow PM configs for sparc32 COMPILE_TEST
hung_task: print message when hung_task_warnings gets down to zero.
arch/Kconfig: fix indentation
scripts/tags.sh: fix the Kconfig tags generation when using latest ctags
nilfs2: prevent WARNING in nilfs_dat_commit_end()
lib/zlib: remove redundation assignement of avail_in dfltcc_gdht()
lib/Kconfig.debug: do not enable DEBUG_PREEMPT by default
lib/zlib: DFLTCC always switch to software inflate for Z_PACKET_FLUSH option
lib/zlib: DFLTCC support inflate with small window
lib/zlib: Split deflate and inflate states for DFLTCC
lib/zlib: DFLTCC not writing header bits when avail_out == 0
lib/zlib: fix DFLTCC ignoring flush modes when avail_in == 0
lib/zlib: fix DFLTCC not flushing EOBS when creating raw streams
lib/zlib: implement switching between DFLTCC and software
lib/zlib: adjust offset calculation for dfltcc_state
nilfs2: replace WARN_ONs for invalid DAT metadata block requests
scripts/spelling.txt: add "exsits" pattern and fix typo instances
fs: gracefully handle ->get_block not mapping bh in __mpage_writepage
cramfs: Kconfig: fix spelling & punctuation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux
Pull modules updates from Luis Chamberlain:
"Nothing exciting at all for modules for v6.3.
The biggest change is just the change of INSTALL_MOD_DIR from "extra"
to "updates" which I found lingered for ages for no good reason while
testing the CXL mock driver [0].
The CXL mock driver has no kconfig integration and requires building
an external module... and re-building the *rest* of the production
drivers. This mock driver when loaded but not the production ones will
crash.
All this can obviously be fixed by integrating kconfig semantics into
such test module, however that's not desirable by the maintainer, and
so sensible defaults must be used to ensure a default "make
modules_install" will suffice for most distros which do not have a
file like /etc/depmod.d/dist.conf with something like `search updates
extra built-in`.
Since most distros rely on kmod and since its inception the "updates"
directory is always in the search path it makes more sense to use that
than the "extra" which only *some* RH based systems rely on.
All this stuff has been on linux-next for a while"
[0] https://lkml.kernel.org/r/20221209062919.1096779-1-mcgrof@kernel.org
* tag 'modules-6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
Documentation: livepatch: module-elf-format: Remove local klp_modinfo definition
module.h: Document klp_modinfo struct using kdoc
module: Use kstrtobool() instead of strtobool()
kernel/params.c: Use kstrtobool() instead of strtobool()
test_kmod: stop kernel-doc warnings
kbuild: Modify default INSTALL_MOD_DIR from extra to updates
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt:
- Add function names as a way to filter function addresses
- Add sample module to test ftrace ops and dynamic trampolines
- Allow stack traces to be passed from beginning event to end event for
synthetic events. This will allow seeing the stack trace of when a
task is scheduled out and recorded when it gets scheduled back in.
- Add trace event helper __get_buf() to use as a temporary buffer when
printing out trace event output.
- Add kernel command line to create trace instances on boot up.
- Add enabling of events to instances created at boot up.
- Add trace_array_puts() to write into instances.
- Allow boot instances to take a snapshot at the end of boot up.
- Allow live patch modules to include trace events
- Minor fixes and clean ups
* tag 'trace-v6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: (31 commits)
tracing: Remove unnecessary NULL assignment
tracepoint: Allow livepatch module add trace event
tracing: Always use canonical ftrace path
tracing/histogram: Fix stacktrace histogram Documententation
tracing/histogram: Fix stacktrace key
tracing/histogram: Fix a few problems with stacktrace variable printing
tracing: Add BUILD_BUG() to make sure stacktrace fits in strings
tracing/histogram: Don't use strlen to find length of stacktrace variables
tracing: Allow boot instances to have snapshot buffers
tracing: Add trace_array_puts() to write into instance
tracing: Add enabling of events to boot instances
tracing: Add creation of instances at boot command line
tracing: Fix trace_event_raw_event_synth() if else statement
samples: ftrace: Make some global variables static
ftrace: sample: avoid open-coded 64-bit division
samples: ftrace: Include the nospec-branch.h only for x86
tracing: Acquire buffer from temparary trace sequence
tracing/histogram: Wrap remaining shell snippets in code blocks
tracing/osnoise: No need for schedule_hrtimeout range
bpf/tracing: Use stage6 of tracing to not duplicate macros
...
|
|
Pull documentation updates from Jonathan Corbet:
"It has been a moderately calm cycle for documentation; the significant
changes include:
- Some significant additions to the memory-management documentation
- Some improvements to navigation in the HTML-rendered docs
- More Spanish and Chinese translations
... and the usual set of typo fixes and such"
* tag 'docs-6.3' of git://git.lwn.net/linux: (68 commits)
Documentation/watchdog/hpwdt: Fix Format
Documentation/watchdog/hpwdt: Fix Reference
Documentation: core-api: padata: correct spelling
docs/mm: Physical Memory: correct spelling in reference to CONFIG_PAGE_EXTENSION
docs: Use HTML comments for the kernel-toc SPDX line
docs: Add more information to the HTML sidebar
Documentation: KVM: Update AMD memory encryption link
printk: Document that CONFIG_BOOT_PRINTK_DELAY required for boot_delay=
Documentation: userspace-api: correct spelling
Documentation: sparc: correct spelling
Documentation: driver-api: correct spelling
Documentation: admin-guide: correct spelling
docs: add workload-tracing document to admin-guide
docs/admin-guide/mm: remove useless markup
docs/mm: remove useless markup
docs/mm: Physical Memory: remove useless markup
docs/sp_SP: Add process magic-number translation
docs: ftrace: always use canonical ftrace path
Doc/damon: fix the data path error
dma-buf: Add "dma-buf" to title of documentation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Add dedicated kmem_cache for typical/small skb->head, avoid having
to access struct page at kfree time, and improve memory use.
- Introduce sysctl to set default RPS configuration for new netdevs.
- Define Netlink protocol specification format which can be used to
describe messages used by each family and auto-generate parsers.
Add tools for generating kernel data structures and uAPI headers.
- Expose all net/core sysctls inside netns.
- Remove 4s sleep in netpoll if carrier is instantly detected on
boot.
- Add configurable limit of MDB entries per port, and port-vlan.
- Continue populating drop reasons throughout the stack.
- Retire a handful of legacy Qdiscs and classifiers.
Protocols:
- Support IPv4 big TCP (TSO frames larger than 64kB).
- Add IP_LOCAL_PORT_RANGE socket option, to control local port range
on socket by socket basis.
- Track and report in procfs number of MPTCP sockets used.
- Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path
manager.
- IPv6: don't check net.ipv6.route.max_size and rely on garbage
collection to free memory (similarly to IPv4).
- Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986).
- ICMP: add per-rate limit counters.
- Add support for user scanning requests in ieee802154.
- Remove static WEP support.
- Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate
reporting.
- WiFi 7 EHT channel puncturing support (client & AP).
BPF:
- Add a rbtree data structure following the "next-gen data structure"
precedent set by recently added linked list, that is, by using
kfunc + kptr instead of adding a new BPF map type.
- Expose XDP hints via kfuncs with initial support for RX hash and
timestamp metadata.
- Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to
better support decap on GRE tunnel devices not operating in collect
metadata.
- Improve x86 JIT's codegen for PROBE_MEM runtime error checks.
- Remove the need for trace_printk_lock for bpf_trace_printk and
bpf_trace_vprintk helpers.
- Extend libbpf's bpf_tracing.h support for tracing arguments of
kprobes/uprobes and syscall as a special case.
- Significantly reduce the search time for module symbols by
livepatch and BPF.
- Enable cpumasks to be used as kptrs, which is useful for tracing
programs tracking which tasks end up running on which CPUs in
different time intervals.
- Add support for BPF trampoline on s390x and riscv64.
- Add capability to export the XDP features supported by the NIC.
- Add __bpf_kfunc tag for marking kernel functions as kfuncs.
- Add cgroup.memory=nobpf kernel parameter option to disable BPF
memory accounting for container environments.
Netfilter:
- Remove the CLUSTERIP target. It has been marked as obsolete for
years, and we still have WARN splats wrt races of the out-of-band
/proc interface installed by this target.
- Add 'destroy' commands to nf_tables. They are identical to the
existing 'delete' commands, but do not return an error if the
referenced object (set, chain, rule...) did not exist.
Driver API:
- Improve cpumask_local_spread() locality to help NICs set the right
IRQ affinity on AMD platforms.
- Separate C22 and C45 MDIO bus transactions more clearly.
- Introduce new DCB table to control DSCP rewrite on egress.
- Support configuration of Physical Layer Collision Avoidance (PLCA)
Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of
shared medium Ethernet.
- Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing
preemption of low priority frames by high priority frames.
- Add support for controlling MACSec offload using netlink SET.
- Rework devlink instance refcounts to allow registration and
de-registration under the instance lock. Split the code into
multiple files, drop some of the unnecessarily granular locks and
factor out common parts of netlink operation handling.
- Add TX frame aggregation parameters (for USB drivers).
- Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning
messages with notifications for debug.
- Allow offloading of UDP NEW connections via act_ct.
- Add support for per action HW stats in TC.
- Support hardware miss to TC action (continue processing in SW from
a specific point in the action chain).
- Warn if old Wireless Extension user space interface is used with
modern cfg80211/mac80211 drivers. Do not support Wireless
Extensions for Wi-Fi 7 devices at all. Everyone should switch to
using nl80211 interface instead.
- Improve the CAN bit timing configuration. Use extack to return
error messages directly to user space, update the SJW handling,
including the definition of a new default value that will benefit
CAN-FD controllers, by increasing their oscillator tolerance.
New hardware / drivers:
- Ethernet:
- nVidia BlueField-3 support (control traffic driver)
- Ethernet support for imx93 SoCs
- Motorcomm yt8531 gigabit Ethernet PHY
- onsemi NCN26000 10BASE-T1S PHY (with support for PLCA)
- Microchip LAN8841 PHY (incl. cable diagnostics and PTP)
- Amlogic gxl MDIO mux
- WiFi:
- RealTek RTL8188EU (rtl8xxxu)
- Qualcomm Wi-Fi 7 devices (ath12k)
- CAN:
- Renesas R-Car V4H
Drivers:
- Bluetooth:
- Set Per Platform Antenna Gain (PPAG) for Intel controllers.
- Ethernet NICs:
- Intel (1G, igc):
- support TSN / Qbv / packet scheduling features of i226 model
- Intel (100G, ice):
- use GNSS subsystem instead of TTY
- multi-buffer XDP support
- extend support for GPIO pins to E823 devices
- nVidia/Mellanox:
- update the shared buffer configuration on PFC commands
- implement PTP adjphase function for HW offset control
- TC support for Geneve and GRE with VF tunnel offload
- more efficient crypto key management method
- multi-port eswitch support
- Netronome/Corigine:
- add DCB IEEE support
- support IPsec offloading for NFP3800
- Freescale/NXP (enetc):
- support XDP_REDIRECT for XDP non-linear buffers
- improve reconfig, avoid link flap and waiting for idle
- support MAC Merge layer
- Other NICs:
- sfc/ef100: add basic devlink support for ef100
- ionic: rx_push mode operation (writing descriptors via MMIO)
- bnxt: use the auxiliary bus abstraction for RDMA
- r8169: disable ASPM and reset bus in case of tx timeout
- cpsw: support QSGMII mode for J721e CPSW9G
- cpts: support pulse-per-second output
- ngbe: add an mdio bus driver
- usbnet: optimize usbnet_bh() by avoiding unnecessary queuing
- r8152: handle devices with FW with NCM support
- amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation
- virtio-net: support multi buffer XDP
- virtio/vsock: replace virtio_vsock_pkt with sk_buff
- tsnep: XDP support
- Ethernet high-speed switches:
- nVidia/Mellanox (mlxsw):
- add support for latency TLV (in FW control messages)
- Microchip (sparx5):
- separate explicit and implicit traffic forwarding rules, make
the implicit rules always active
- add support for egress DSCP rewrite
- IS0 VCAP support (Ingress Classification)
- IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS
etc.)
- ES2 VCAP support (Egress Access Control)
- support for Per-Stream Filtering and Policing (802.1Q,
8.6.5.1)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- add MAB (port auth) offload support
- enable PTP receive for mv88e6390
- NXP (ocelot):
- support MAC Merge layer
- support for the the vsc7512 internal copper phys
- Microchip:
- lan9303: convert to PHYLINK
- lan966x: support TC flower filter statistics
- lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x
- lan937x: support Credit Based Shaper configuration
- ksz9477: support Energy Efficient Ethernet
- other:
- qca8k: convert to regmap read/write API, use bulk operations
- rswitch: Improve TX timestamp accuracy
- Intel WiFi (iwlwifi):
- EHT (Wi-Fi 7) rate reporting
- STEP equalizer support: transfer some STEP (connection to radio
on platforms with integrated wifi) related parameters from the
BIOS to the firmware.
- Qualcomm 802.11ax WiFi (ath11k):
- IPQ5018 support
- Fine Timing Measurement (FTM) responder role support
- channel 177 support
- MediaTek WiFi (mt76):
- per-PHY LED support
- mt7996: EHT (Wi-Fi 7) support
- Wireless Ethernet Dispatch (WED) reset support
- switch to using page pool allocator
- RealTek WiFi (rtw89):
- support new version of Bluetooth co-existance
- Mobile:
- rmnet: support TX aggregation"
* tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits)
page_pool: add a comment explaining the fragment counter usage
net: ethtool: fix __ethtool_dev_mm_supported() implementation
ethtool: pse-pd: Fix double word in comments
xsk: add linux/vmalloc.h to xsk.c
sefltests: netdevsim: wait for devlink instance after netns removal
selftest: fib_tests: Always cleanup before exit
net/mlx5e: Align IPsec ASO result memory to be as required by hardware
net/mlx5e: TC, Set CT miss to the specific ct action instance
net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG
net/mlx5: Refactor tc miss handling to a single function
net/mlx5: Kconfig: Make tc offload depend on tc skb extension
net/sched: flower: Support hardware miss to tc action
net/sched: flower: Move filter handle initialization earlier
net/sched: cls_api: Support hardware miss to tc action
net/sched: Rename user cookie and act cookie
sfc: fix builds without CONFIG_RTC_LIB
sfc: clean up some inconsistent indentings
net/mlx4_en: Introduce flexible array to silence overflow warning
net: lan966x: Fix possible deadlock inside PTP
net/ulp: Remove redundant ->clone() test in inet_clone_ulp().
...
|
|
RISC-V has some GNU disassembly quirks, e.g. it requires '-D' to
properly disassemble .2byte directives similar to Arm [1]. Further,
GNU objdump groups RISC-V instruction by 2 or 4 byte chunks, instead
doing byte-for-byte.
Add the required switches, and translate from short/word to bytes when
ARCH is "riscv".
An example how to invoke decodecode for RISC-V:
$ echo 'Code: bf45 f793 1007 f7d9 50ef 37af d541 b7d9 7097 00c8 (80e7)
6140' | AFLAGS="-march=rv64imac_zicbom_zihintpause" \
ARCH=riscv CROSS_COMPILE=riscv64-linux-gnu- ./scripts/decodecode
Code: bf45 f793 1007 f7d9 50ef 37af d541 b7d9 7097 00c8 (80e7) 6140
All code
========
0: bf45 c.j 0xffffffffffffffb0
2: 1007f793 andi a5,a5,256
6: f7d9 c.bnez a5,0xffffffffffffff94
8: 37af50ef jal ra,0xf5382
c: d541 c.beqz a0,0xffffffffffffff94
e: b7d9 c.j 0xffffffffffffffd4
10: 00c87097 auipc ra,0xc87
14:* 614080e7 jalr ra,1556(ra) # 0xc87624 <-- trapping instruction
Code starting with the faulting instruction
===========================================
0: 614080e7 jalr ra,1556(ra)
[1] https://sourceware.org/bugzilla/show_bug.cgi?id=10263
Signed-off-by: Björn Töpel <bjorn@rivosinc.com>
Tested-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230119074738.708301-3-bjorn@kernel.org
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
"Beyond some specific LoadPin, UBSAN, and fortify features, there are
other fixes scattered around in various subsystems where maintainers
were okay with me carrying them in my tree or were non-responsive but
the patches were reviewed by others:
- Replace 0-length and 1-element arrays with flexible arrays in
various subsystems (Paulo Miguel Almeida, Stephen Rothwell, Kees
Cook)
- randstruct: Disable Clang 15 support (Eric Biggers)
- GCC plugins: Drop -std=gnu++11 flag (Sam James)
- strpbrk(): Refactor to use strchr() (Andy Shevchenko)
- LoadPin LSM: Allow root filesystem switching when non-enforcing
- fortify: Use dynamic object size hints when available
- ext4: Fix CFI function prototype mismatch
- Nouveau: Fix DP buffer size arguments
- hisilicon: Wipe entire crypto DMA pool on error
- coda: Fully allocate sig_inputArgs
- UBSAN: Improve arm64 trap code reporting
- copy_struct_from_user(): Add minimum bounds check on kernel buffer
size"
* tag 'hardening-v6.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
randstruct: disable Clang 15 support
uaccess: Add minimum bounds check on kernel buffer size
arm64: Support Clang UBSAN trap codes for better reporting
coda: Avoid partial allocation of sig_inputArgs
gcc-plugins: drop -std=gnu++11 to fix GCC 13 build
lib/string: Use strchr() in strpbrk()
crypto: hisilicon: Wipe entire pool on error
net/i40e: Replace 0-length array with flexible array
io_uring: Replace 0-length array with flexible array
ext4: Fix function prototype mismatch for ext4_feat_ktype
i915/gvt: Replace one-element array with flexible-array member
drm/nouveau/disp: Fix nvif_outp_acquire_dp() argument size
LoadPin: Allow filesystem switch when not enforcing
LoadPin: Move pin reporting cleanly out of locking
LoadPin: Refactor sysctl initialization
LoadPin: Refactor read-only check into a helper
ARM: ixp4xx: Replace 0-length arrays with flexible arrays
fortify: Use __builtin_dynamic_object_size() when available
rxrpc: replace zero-lenth array with DECLARE_FLEX_ARRAY() helper
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
- Robustify/fix calling startup_{32,64}() from the decompressor code,
and removing x86 quirk from scripts/head-object-list.txt as a result.
- Do not register processors that cannot be onlined for x2APIC
* tag 'x86-boot-2023-02-20' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/acpi/boot: Do not register processors that cannot be onlined for x2APIC
scripts/head-object-list: Remove x86 from the list
x86/boot: Robustify calling startup_{32,64}() from the decompressor code
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM defconfigs updates from Arnd Bergmann:
"As usual, this contains all the patches to enable options for newly
added device drivers in the 32-bit and 64-bit defconfig files.
I have sorted the files according to the changes to Kconfig files,
to make it easier to check what has changed compared to the 'make
savedefconfig' output.
The most notable change this time is a series from Mark Brown to add
a 'virtconfig' target for arm64, which is for the moment the same as
the 'defconfig' target but disables all the top-level SoC specific
options in order to have a smaller and faster kernel build"
* tag 'soc-defconfig-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (39 commits)
arm64: defconfig: enable drivers required by the Qualcomm SA8775P platform
arm64: defconfig: Enable DisplayPort on SC8280XP laptops
arm64: configs: Add virtconfig
kbuild: Provide a version of merge_into_defconfig without override warnings
scripts: merge_config: Add option to suppress warning on overrides
ARM: reorder defconfig files
arm64: reorder defconfig
arm64: defconfig: enable Qualcomm SDAM nvmem driver
arm64: defconfig: enable SM8450 DISPCC clock driver
ARM: defconfig: Add IOSCHED_BFQ to the default configs
ARM: configs: multi_v7: enable NVMEM driver for STM32
ARM: Add wpcm450_defconfig for Nuvoton WPCM450
arm64: defconfig: Enable DMA_RESTRICTED_POOL
arm64: defconfig: Enable missing configs for mt8192-asurada
riscv: defconfig: Enable the Allwinner D1 platform and drivers
ARM: imx_v6_v7_defconfig: Don't enable PROVE_LOCKING
ARM: multi_v7_defconfig: Add GXP Fan and SPI support
ARM: add multi_v7_lpae_defconfig
kbuild: Add config fragment merge functionality
ARM: multi_v7_defconfig: Add options to support TQMLS102xA series
...
|
|
The canonical location for the tracefs filesystem is at /sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
Many comments and Kconfig help messages in the tracing code still refer
to this older debugfs path, so let's update them to avoid confusion.
Link: https://lore.kernel.org/linux-trace-kernel/20230215223350.2658616-2-zwisler@google.com
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Ross Zwisler <zwisler@google.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
|
|
scripts/dtc/of_unittest_expect processes EXPECT messages that
document expected kernel messages triggered by unittest. Add
processing of EXPECT_NOT messages that document kernel messages
triggered by unittest that are not expected.
This is commit 2 of 2, implementing the processing of EXPECT_NOT
messages.
Signed-off-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20230213185702.395776-3-frowand.list@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
scripts/dtc/of_unittest_expect processes EXPECT messages that
document expected kernel messages triggered by unittest. Add
processing of EXPECT_NOT messages that document kernel messages
triggered by unittest that are not expected.
This is commit 1 of 2, renaming existing variables in anticipation
of the changes needed to process EXPECT_NOT, so that commit 2 of 2
will be smaller and easier to read. This commit is not intended
to make any functional changes.
Signed-off-by: Frank Rowand <frowand.list@gmail.com>
Link: https://lore.kernel.org/r/20230213185702.395776-2-frowand.list@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
|
|
Some of the devlink bits were tricky, but I think I got it right.
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Starting with release 10.38 PCRE2 drops default support for using \K in
lookaround patterns as described in [1]. Unfortunately, scripts/tags.sh
relies on such functionality to collect all_compiled_soures() leading to
the following error:
$ make COMPILED_SOURCE=1 tags
GEN tags
grep: \K is not allowed in lookarounds (but see PCRE2_EXTRA_ALLOW_LOOKAROUND_BSK)
The usage of \K for this pattern was introduced in commit 4f491bb6ea2a
("scripts/tags.sh: collect compiled source precisely") which speeds up
the generation of tags significantly.
In order to fix this issue without compromising the performance we can
switch over to an equivalent sed expression. The same matching pattern
is preserved here except \K is replaced with a backreference \1.
[1] https://www.pcre.org/current/doc/html/pcre2syntax.html#SEC11
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Jialu Xu <xujialu@vimux.org>
Cc: Vipin Sharma <vipinsh@google.com>
Cc: stable@vger.kernel.org
Fixes: 4f491bb6ea2a ("scripts/tags.sh: collect compiled source precisely")
Signed-off-by: Carlos Llamas <cmllamas@google.com>
Link: https://lore.kernel.org/r/20230215183850.3353198-1-cmllamas@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
In short, the motivation of this commit is to build a source package
without cleaning the source tree.
The deb-pkg and (src)rpm-pkg targets first run 'make clean' before
creating a source tarball. Otherwise build artifacts such as *.o,
*.a, etc. would be included in the tarball. Yet, the tarball ends up
containing several garbage files since 'make clean' does not clean
everything.
Cleaning the tree every time is annoying since it makes the incremental
build impossible. It is desirable to create a source tarball without
cleaning the tree.
In fact, there are some ways to achieve this.
The easiest solution is 'git archive'. 'make perf-tar*-src-pkg' uses
it, but I do not like it because it works only when the source tree is
managed by git, and all files you want in the tarball must be committed
in advance.
I want to make it work without relying on git. We can do this.
Files that are ignored by git are generated files, so should be excluded
from the source tarball. We can list them out by parsing the .gitignore
files. Of course, .gitignore does not cover all the cases, but it works
well enough.
tar(1) claims to support it:
--exclude-vcs-ignores
Exclude files that match patterns read from VCS-specific ignore files.
Supported files are: .cvsignore, .gitignore, .bzrignore, and .hgignore.
The best scenario would be to use 'tar --exclude-vcs-ignores', but this
option does not work. --exclude-vcs-ignore does not understand any of
the negation (!), preceding slash, following slash, etc.. So, this option
is just useless.
Hence, I wrote this gitignore parser. The previous version [1], written
in Python, was so slow. This version is implemented in C, so it works
much faster.
I imported the code from git (commit: 23c56f7bd5f1), so we get the same
result.
This tool traverses the source tree, parsing all .gitignore files, and
prints file paths that are ignored by git.
The output is similar to 'git ls-files --ignored --directory --others
--exclude-per-directory=.gitignore', except
[1] Not sorted
[2] No trailing slash for directories
[2] is intentional because tar's --exclude-from option cannot handle
trailing slashes.
[How to test this tool]
$ git clean -dfx
$ make -s -j$(nproc) defconfig all # or allmodconifg or whatever
$ git archive -o ../linux1.tar --prefix=./ HEAD
$ tar tf ../linux1.tar | LANG=C sort > ../file-list1 # files emitted by 'git archive'
$ make scripts_package
HOSTCC scripts/list-gitignored
$ scripts/list-gitignored --prefix=./ -o ../exclude-list
$ tar cf ../linux2.tar --exclude-from=../exclude-list .
$ tar tf ../linux2.tar | LANG=C sort > ../file-list2 # files emitted by 'tar'
$ diff ../file-list1 ../file-list2 | grep -E '^(<|>)'
< ./Documentation/devicetree/bindings/.yamllint
< ./drivers/clk/.kunitconfig
< ./drivers/gpu/drm/tests/.kunitconfig
< ./drivers/hid/.kunitconfig
< ./fs/ext4/.kunitconfig
< ./fs/fat/.kunitconfig
< ./kernel/kcsan/.kunitconfig
< ./lib/kunit/.kunitconfig
< ./mm/kfence/.kunitconfig
< ./tools/testing/selftests/arm64/tags/
< ./tools/testing/selftests/arm64/tags/.gitignore
< ./tools/testing/selftests/arm64/tags/Makefile
< ./tools/testing/selftests/arm64/tags/run_tags_test.sh
< ./tools/testing/selftests/arm64/tags/tags_test.c
< ./tools/testing/selftests/kvm/.gitignore
< ./tools/testing/selftests/kvm/Makefile
< ./tools/testing/selftests/kvm/config
< ./tools/testing/selftests/kvm/settings
The source tarball contains most of files that are tracked by git. You
see some diffs, but it is just because some .gitignore files are wrong.
$ git ls-files -i -c --exclude-per-directory=.gitignore
Documentation/devicetree/bindings/.yamllint
drivers/clk/.kunitconfig
drivers/gpu/drm/tests/.kunitconfig
drivers/hid/.kunitconfig
fs/ext4/.kunitconfig
fs/fat/.kunitconfig
kernel/kcsan/.kunitconfig
lib/kunit/.kunitconfig
mm/kfence/.kunitconfig
tools/testing/selftests/arm64/tags/.gitignore
tools/testing/selftests/arm64/tags/Makefile
tools/testing/selftests/arm64/tags/run_tags_test.sh
tools/testing/selftests/arm64/tags/tags_test.c
tools/testing/selftests/kvm/.gitignore
tools/testing/selftests/kvm/Makefile
tools/testing/selftests/kvm/config
tools/testing/selftests/kvm/settings
[1]: https://lore.kernel.org/all/20230128173843.765212-1-masahiroy@kernel.org/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
Currently, setlocalversion uses any annotated tag for git-describe.
If we are at a tagged commit, it will not append the commit hash.
$ git checkout v6.2-rc1^
$ make -s defconfig kernelrelease
6.1.0-14595-g292a089d78d3
$ git tag -a foo -m foo
$ make -s kernelrelease
6.1.0
If a local tag 'foo' exists, it pretends to be a released version
'6.1.0', while there are many commits on top of it.
The output should be consistent irrespective of such a local tag.
Pass the correct release tag to --match option of git-describe.
In the mainline kernel, the SUBLEVEL is always '0', which is omitted
from the tag.
KERNELVERSION annotated tag
6.1.0 -> v6.1 (mainline)
6.2.0-rc5 -> v6.2-rc5 (mainline, release candidate)
6.1.7 -> v6.1.7 (stable)
To preserve the behavior in linux-next, use the tag derived from
localversion* files if exists. In linux-next, the local version is
specified by the localversion-next file.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Twelve hotfixes, mostly against mm/.
Five of these fixes are cc:stable"
* tag 'mm-hotfixes-stable-2023-02-13-13-50' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
of: reserved_mem: Have kmemleak ignore dynamically allocated reserved mem
scripts/gdb: fix 'lx-current' for x86
lib: parser: optimize match_NUMBER apis to use local array
mm: shrinkers: fix deadlock in shrinker debugfs
mm: hwpoison: support recovery from ksm_might_need_to_copy()
kasan: fix Oops due to missing calls to kasan_arch_is_ready()
revert "squashfs: harden sanity check in squashfs_read_xattr_id_table"
fsdax: dax_unshare_iter() should return a valid length
mm/gup: add folio to list when folio_isolate_lru() succeed
aio: fix mremap after fork null-deref
mailmap: add entry for Alexander Mikhalitsyn
mm: extend max struct page size for kmsan
|
