summaryrefslogtreecommitdiff
path: root/sound/core
AgeCommit message (Collapse)Author
2017-07-14Merge tag 'sound-fix-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Small last-minute fixes for 4.13-rc1: a couple of PCM fixes for m68k, a cleanup work for legacy ISA msnd driver, and a few HD-audio new IDs and quirks" * tag 'sound-fix-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add hdmi id for a Geminilake variant ALSA: hda/realtek - New codec device ID for ALC1220 ALSA: pcm: Simplify check for dma_mmap_coherent() availability ALSA: pcm: Protect call to dma_mmap_coherent() by check for HAS_DMA ALSA: msnd: Optimize / harden DSP and MIDI loops ALSA: hda/realtek - change the location for one of two front microphones ALSA: opl4: Move inline before return type
2017-07-10ALSA: pcm: Simplify check for dma_mmap_coherent() availabilityTakashi Iwai
We check the availability of dma_mmap_coherent() in hw_support_mmap() but with an ugly ifdef of lots of arch-checks. Now we have a nice CONFIG_ARCH_NO_COHERENT_DMA_MMAP kconfig, and this can be used together with CONFIG_HAS_DMA check for a cleaner and more comprehensive check. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-07-10ALSA: pcm: Protect call to dma_mmap_coherent() by check for HAS_DMAGeert Uytterhoeven
If NO_DMA=y: sound/core/pcm_native.o: In function `snd_pcm_lib_default_mmap': pcm_native.c:(.text+0x144c): undefined reference to `bad_dma_ops' pcm_native.c:(.text+0x1474): undefined reference to `dma_common_mmap' Add a check for HAS_DMA to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-07-06Merge tag 'sound-4.13-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "This development cycle resulted in a fair amount of changes in both core and driver sides. The most significant change in ALSA core is about PCM. Also the support of of-graph card and the new DAPM widget for DSP are noteworthy changes in ASoC core. And there're lots of small changes splat over the tree, as you can see in diffstat. Below are a few highlights: ALSA core: - Removal of set_fs() hackery from PCM core stuff, and the code reorganization / optimization thereafter - Improved support of PCM ack ops, and a new ABI for improved control/status mmap handling - Lots of constifications in various codes ASoC core: - The support of of-graph card, which may work as a better generic device for a replacement of simple-card - New widget types intended mainly for use with DSPs ASoC drivers: - New drivers for Allwinner V3s SoCs - Ensonic ES8316 codec support - More Intel SKL and KBL works - More device support for Intel SST Atom (mostly for cheap tablets and 2-in-1 devices) - Support for Rockchip PDM controllers - Support for STM32 I2S and S/PDIF controllers - Support for ZTE AUD96P22 codecs HD-audio: - Support of new Realtek codecs (ALC215/ALC285/ALC289), more quirks for HP and Dell machines - A few more fixes for i915 component binding" * tag 'sound-4.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (418 commits) ALSA: hda - Fix unbalance of i915 module refcount ASoC: Intel: Skylake: Remove driver debugfs exit ASoC: Intel: Skylake: explicitly add the headers sst-dsp.h ALSA: hda/realtek - Remove GPIO_MASK ALSA: hda/realtek - Fix typo of pincfg for Dell quirk ALSA: pcm: add a documentation for tracepoints ALSA: atmel: ac97c: fix error return code in atmel_ac97c_probe() ALSA: x86: fix error return code in hdmi_lpe_audio_probe() ASoC: Intel: Skylake: Add support to read firmware registers ASoC: Intel: Skylake: Add sram address to sst_addr structure ASoC: Intel: Skylake: Debugfs facility to dump module config ASoC: Intel: Skylake: Add debugfs support ASoC: fix semicolon.cocci warnings ASoC: rt5645: Add quirk override by module option ASoC: rsnd: make arrays path and cmd_case static const ASoC: audio-graph-card: add widgets and routing for external amplifier support ASoC: audio-graph-card: update bindings for amplifier support ASoC: rt5665: calibration should be done before jack detection ASoC: rsnd: constify dev_pm_ops structures. ASoC: nau8825: change crosstalk-bypass property to bool type ...
2017-06-29ALSA: pcm: constify attribute_group structures.Arvind Yadav
attribute_groups are not supposed to change at runtime. All functions working with attribute_groups provided by <linux/device.h> work with const attribute_group. So mark the non-const structs as const. File size before: text data bss dec hex filename 9781 240 8 10029 272d sound/core/pcm.o File size After adding 'const': text data bss dec hex filename 9813 176 8 9997 270d sound/core/pcm.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-27ALSA: pcm: Disable only control mmap for explicit appl_ptr syncTakashi Iwai
Now that user-space (typically alsa-lib) can specify which protocol version it supports, we can optimize the kernel code depending on the reported protocol version. In this patch, we change the previous hack for enforcing the appl_ptr sync by disabling status/control mmap. Instead of forcibly disabling both mmaps, we disable only the control mmap when user-space declares the supported protocol version new enough. For older user-space, still both PCM status and control mmaps are disabled when requested by the driver due to the compatibility reason. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-27ALSA: pcm: Add an ioctl to specify the supported protocol versionTakashi Iwai
We have an ioctl to inform the PCM protocol version the running kernel supports, but there is no way to know which protocol version the user-space can understand. This lack of information caused headaches in the past when we tried to extend the ABI. For example, because we couldn't guarantee the validity of the reserved bytes, we had to introduce a new ioctl SNDRV_PCM_IOCTL_STATUS_EXT for assigning a few new fields in the formerly reserved bits. If we could know that it's a new alsa-lib, we could assume the availability of the new fields, thus we could have reused the existing SNDRV_PCM_IOCTL_STATUS. In order to improve the ABI extensibility, this patch adds a new ioctl for user-space to inform its supporting protocol version to the kernel. By reporting the supported protocol from user-space, the kernel can judge which feature should be provided and which not. With the addition of the new ioctl, the PCM protocol version is bumped to 2.0.14, too. User-space checks the kernel protocol version via SNDRV_PCM_INFO_PVERSION, then it sets the supported version back via SNDRV_PCM_INFO_USER_PVERSION. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-24Merge branch 'linus' into sched/core, to pick up fixesIngo Molnar
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-23ALSA: pcm: Add the explicit appl_ptr sync supportTakashi Iwai
Currently x86 platforms use the PCM status/control mmaps for transferring the PCM status and appl_ptr between kernel and user-spaces. The mmap is a most efficient way of communication, but it has a drawback per its nature, namely, it can't notify the change explicitly to kernel. The lack of appl_ptr update notification is a problem on a few existing drivers, but it's mostly a small issue and negligible. However, a new type of driver that uses DSP for a deep buffer management requires the exact position of appl_ptr for calculating the buffer prefetch size, and the asynchronous appl_ptr update between kernel and user-spaces becomes a significant problem for it. How can we enforce user-space to report the appl_ptr update? The way is relatively simple. Just by disabling the PCM control mmap, the user-space is supposed to fall back to the mode using SYNC_PTR ioctl, and the kernel gets control over that. This fallback mode is used in all non-x86 platforms as default, and also in the 32bit compatible model on all platforms including x86. It's been implemented already over a decade, so we can say it's fairly safe and stably working. With the help of the knowledge above, this patch introduces a new PCM info flag SNDRV_PCM_INFO_SYNC_APPLPTR for achieving the appl_ptr sync from user-space. When a driver sets this flag at open, the PCM status / control mmap is disabled, which effectively switches to SYNC_PTR mode in user-space side. In this version, both PCM status and control mmaps are disabled although only the latter, control mmap, is the target. It's because the current alsa-lib implementation supposes that both status and control mmaps are always coupled, thus it handles a fatal error when only one of them fails. Of course, the disablement of the status/control mmaps may bring a slight performance overhead. Thus, as of now, this should be used only for the dedicated devices that deserves. Note that the disablement of mmap is a sort of workaround. In the later patch, we'll introduce the way to identify the protocol version alsa-lib supports, and keep mmap working while the sync_ptr is performed together. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-20sched/wait: Rename wait_queue_t => wait_queue_entry_tIngo Molnar
Rename: wait_queue_t => wait_queue_entry_t 'wait_queue_t' was always a slight misnomer: its name implies that it's a "queue", but in reality it's a queue *entry*. The 'real' queue is the wait queue head, which had to carry the name. Start sorting this out by renaming it to 'wait_queue_entry_t'. This also allows the real structure name 'struct __wait_queue' to lose its double underscore and become 'struct wait_queue_entry', which is the more canonical nomenclature for such data types. Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-06-20ALSA: pcm: Fix possible inconsistent appl_ptr update via mmapTakashi Iwai
The ALSA PCM core refers to the appl_ptr value stored on the mmapped page that is shared between kernel and user-space. Although the reference is performed in the PCM stream lock, it doesn't guarantee the atomic access when the value gets updated concurrently from the user-space on another CPU. In most of codes, this is no big problem, but still there are a few places that may result in slight inconsistencies because they access runtime->control->appl_ptr multiple times; that is, the second read might be a different value from the first value. It can be even backward or jumping, as we have no control for it. Hence, the calculation may give an unexpected value. Luckily, there is no security vulnerability by that, as far as I've checked. But still we should address it. This patch tries to reduce such possible cases. The fix is simple -- we just read once, store it to a local variable and use it for the rest calculations. The READ_ONCE() macro is used for it in order to avoid the ill-effect by possible compiler optimizations. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-20Merge branch 'for-linus' into for-nextTakashi Iwai
2017-06-16ALSA: core: Follow standard EXPORT_SYMBOL() declarationsTakashi Iwai
Just a tidy up to follow the standard EXPORT_SYMBOL*() declarations in order to improve grep-ability. - Move EXPORT_SYMBOL*() to the position right after its definition - Remove superfluous blank line before EXPORT_SYMBOL*() lines Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-16ALSA: timer: Follow standard EXPORT_SYMBOL() declarationsTakashi Iwai
Just a tidy up to follow the standard EXPORT_SYMBOL*() declarations in order to improve grep-ability. - Move EXPORT_SYMBOL*() to the position right after its definition Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-16ALSA: seq: Follow standard EXPORT_SYMBOL() declarationsTakashi Iwai
Just a tidy up to follow the standard EXPORT_SYMBOL*() declarations in order to improve grep-ability. - Move EXPORT_SYMBOL*() to the position right after its definition - Remove superfluous blank line before EXPORT_SYMBOL*() lines Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-16ALSA: pcm: Follow standard EXPORT_SYMBOL() declarationsTakashi Iwai
Just a tidy up to follow the standard EXPORT_SYMBOL*() declarations in order to improve grep-ability. - Remove superfluous blank line before EXPORT_SYMBOL*() lines Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-14ALSA: pcm: Don't treat NULL chmap as a fatal errorTakashi Iwai
The standard PCM chmap helper callbacks treat the NULL info->chmap as a fatal error and spews the kernel warning with stack trace when CONFIG_SND_DEBUG is on. This was OK, originally it was supposed to be always static and non-NULL. But, as the recent addition of Intel LPE audio driver shows, the chmap content may vary dynamically, and it can be even NULL when disconnected. The user still sees the kernel warning unnecessarily. For clearing such a confusion, this patch simply removes the snd_BUG_ON() in each place, just returns an error without warning. Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-14ALSA: pcm: remove SNDRV_PCM_IOCTL1_INFO internal commandTakashi Sakamoto
Drivers can implement 'struct snd_pcm_ops.ioctl' to handle some requests from ALSA PCM core. These requests are internal purpose in kernel land. Usually common set of operations are used for it. SNDRV_PCM_IOCTL1_INFO is one of the requests. According to code comment, it has been obsoleted in the old days. We can see old releases in ftp.alsa-project.org. The command was firstly introduced in v0.5.0 release as SND_PCM_IOCTL1_INFO, to allow drivers to fill data of 'struct snd_pcm_channel_info' type. In v0.9.0 release, this was obsoleted by the other commands for ioctl(2) such as SNDRV_PCM_IOCTL_CHANNEL_INFO. This commit removes the long-abandoned command, bye. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-14ALSA: pcm: Skip ack callback without actual appl_ptr updateTakashi Iwai
We call ack callback whenever appl_ptr gets updated via pcm_lib_apply_appl_ptr(). There are various code paths to call this function. A part of them are for read/write/forward/rewind, where the appl_ptr is always changed and thus the call of ack is mandatory. OTOH, another part of code paths are from the explicit user call, e.g. via SYNC_PTR ioctl. There, we may receive the same appl_ptr value, and in such a case, calling ack is obviously superfluous. This patch adds the check of the given appl_ptr value, and returns immediately if it's no real update. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-14ALSA: pcm: Use common PCM_RUNTIME_CHECK() for sanity checksTakashi Iwai
Just a code cleanup. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-14ALSA: pcm: Preprocess PAUSED or SUSPENDED stream before PREPARETakashi Iwai
Calling PREPARE ioctl to the stream in either PAUSED or SUSPENDED state may confuse some drivers that don't handle the state properly. Instead of fixing each driver, PCM core should take care of the proper state change before actually trying to (re-)prepare the stream. Namely, when the stream is in PAUSED state, it triggers PAUSE_RELEASE, and when in SUSPENDED state, it triggers STOP, before calling prepare callbacks. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-14ALSA: pcm: Allow dropping stream directly after resumeTakashi Iwai
So far, the PCM core refuses DROP ioctl when the stream in the suspended state. This was basically to avoid the invalid state change *during* the suspend. But since we protect the power change globally in the common PCM ioctl caller side, it's guaranteed that snd_pcm_drop() is called at the right power state. So we can assume that the drop of stream is safe immediately after SUSPENDED state. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-14ALSA: pcm: Apply power lock globally to common ioctlsTakashi Iwai
All PCM common ioctls should run only in the powered up state, but currently only a few ioctls do the proper snd_power_lock() and snd_power_wait() invocations. Instead of adding to each place, do it commonly in the caller side, so that all these ioctls are assured to be operated at the power up state. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-14ALSA: pcm: Clean up SNDRV_PCM_IOCTL_PAUSE codeTakashi Iwai
Use snd_pcm_action_lock_irq() helper instead of open coding. No functional change. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-13Merge branch 'topic/seq-kconfig' into for-nextTakashi Iwai
2017-06-12ALSA: pcm: use %s instead of %c for format of PCM buffer tracepointsTakashi Sakamoto
As long as I know, in userspace, '%c' format on printing format for tracepoint is replaced with '>c<' by existent tracing program; i.g. 'perf-trace' and 'trace-cmd'. This is inconvenient. This commit replaces the format with '%s'. The length of letters in the format string is not changed, thus this commit doesn't increase object size. In theory, I should work for improvements of these tracing programs, but here I'd like to save my time to work for the other projects. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-12ALSA: pcm: add 'applptr' event of tracepointTakashi Sakamoto
In design of ALSA PCM core, status and control data for runtime of ALSA PCM substream are shared between kernel/user spaces by page frame mapping with read-only attribute. Both of hardware-side and application-side position on PCM buffer are maintained as a part of the status data. In a view of ALSA PCM application, these two positions can be updated by executing ioctl(2) with some commands. There's an event of tracepoint for hardware-side position; 'hwptr'. On the other hand, no events for application-side position. This commit adds a new event for this purpose; 'applptr'. When the application-side position is changed in kernel space, this event is probed with useful information for developers. I note that the event is not probed for all of ALSA PCM applications, When applications are written by read/write programming scenario, the event is surely probed. The applications execute ioctl(2) with SNDRV_PCM_IOCTL_[READ|WRITE][N/I]_FRAMES to read/write any PCM frame, then ALSA PCM core updates the application-side position in kernel land. However, when applications are written by mmap programming scenario, if maintaining the application side position in kernel space accurately, applications should voluntarily execute ioctl(2) with SNDRV_PCM_IOCTL_SYNC_PTR to commit the number of handled PCM frames. If not voluntarily, the application-side position is not changed, thus the added event is not probed. There's a loophole, using architectures to which ALSA PCM core judges non cache coherent. In this case, the status and control data is not mapped into processe's VMA for any applications. Userland library, alsa-lib, is programmed for this case. It executes ioctl(2) with SNDRV_PCM_IOCTL_SYNC_PTR command every time to requiring the status and control data. ARM is such an architecture. Below is an example with serial sound interface (ssi) on i.mx6 quad core SoC. I use v4.1 kernel released by fsl-community with patches from VIA Tech. Inc. for VAB820, and my backport patches for relevant features for this patchset. I use Ubuntu 17.04 from ports.ubuntu.com as user land for armhf architecture. $ aplay -v -M -D hw:imx6vab820sgtl5,0 /dev/urandom -f S16_LE -r 48000 --period-size=128 --buffer-size=256 Playing raw data '/dev/urandom' : Signed 16 bit Little Endian, Rate 48000 Hz, Mono Hardware PCM card 0 'imx6-vab820-sgtl5000' device 0 subdevice 0 Its setup is: stream : PLAYBACK access : MMAP_INTERLEAVED format : S16_LE subformat : STD channels : 1 rate : 48000 exact rate : 48000 (48000/1) msbits : 16 buffer_size : 256 period_size : 128 period_time : 2666 tstamp_mode : NONE tstamp_type : MONOTONIC period_step : 1 avail_min : 128 period_event : 0 start_threshold : 256 stop_threshold : 256 silence_threshold: 0 silence_size : 0 boundary : 1073741824 appl_ptr : 0 hw_ptr : 0 mmap_area[0] = 0x76f98000,0,16 (16) $ trace-cmd record -e snd_pcm:hwptr -e snd_pcm:applptr $ trace-cmd report ... 60.208495: applptr: pcmC0D0p/sub0: prev=1792, curr=1792, avail=0, period=128, buf=256 60.208633: applptr: pcmC0D0p/sub0: prev=1792, curr=1792, avail=0, period=128, buf=256 60.210022: hwptr: pcmC0D0p/sub0: IRQ: pos=128, old=1536, base=1536, period=128, buf=256 60.210202: applptr: pcmC0D0p/sub0: prev=1792, curr=1792, avail=128, period=128, buf=256 60.210344: hwptr: pcmC0D0p/sub0: POS: pos=128, old=1664, base=1536, period=128, buf=256 60.210348: applptr: pcmC0D0p/sub0: prev=1792, curr=1792, avail=128, period=128, buf=256 60.210486: applptr: pcmC0D0p/sub0: prev=1792, curr=1792, avail=128, period=128, buf=256 60.210626: applptr: pcmC0D0p/sub0: prev=1792, curr=1920, avail=0, period=128, buf=256 60.211002: applptr: pcmC0D0p/sub0: prev=1920, curr=1920, avail=0, period=128, buf=256 60.211142: hwptr: pcmC0D0p/sub0: POS: pos=128, old=1664, base=1536, period=128, buf=256 60.211146: applptr: pcmC0D0p/sub0: prev=1920, curr=1920, avail=0, period=128, buf=256 60.211287: applptr: pcmC0D0p/sub0: prev=1920, curr=1920, avail=0, period=128, buf=256 60.212690: hwptr: pcmC0D0p/sub0: IRQ: pos=0, old=1664, base=1536, period=128, buf=256 60.212866: applptr: pcmC0D0p/sub0: prev=1920, curr=1920, avail=128, period=128, buf=256 60.212999: hwptr: pcmC0D0p/sub0: POS: pos=0, old=1792, base=1792, period=128, buf=256 60.213003: applptr: pcmC0D0p/sub0: prev=1920, curr=1920, avail=128, period=128, buf=256 60.213135: applptr: pcmC0D0p/sub0: prev=1920, curr=1920, avail=128, period=128, buf=256 60.213276: applptr: pcmC0D0p/sub0: prev=1920, curr=2048, avail=0, period=128, buf=256 60.213654: applptr: pcmC0D0p/sub0: prev=2048, curr=2048, avail=0, period=128, buf=256 60.213796: hwptr: pcmC0D0p/sub0: POS: pos=0, old=1792, base=1792, period=128, buf=256 60.213800: applptr: pcmC0D0p/sub0: prev=2048, curr=2048, avail=0, period=128, buf=256 60.213937: applptr: pcmC0D0p/sub0: prev=2048, curr=2048, avail=0, period=128, buf=256 60.215356: hwptr: pcmC0D0p/sub0: IRQ: pos=128, old=1792, base=1792, period=128, buf=256 60.215542: applptr: pcmC0D0p/sub0: prev=2048, curr=2048, avail=128, period=128, buf=256 60.215679: hwptr: pcmC0D0p/sub0: POS: pos=128, old=1920, base=1792, period=128, buf=256 60.215683: applptr: pcmC0D0p/sub0: prev=2048, curr=2048, avail=128, period=128, buf=256 60.215813: applptr: pcmC0D0p/sub0: prev=2048, curr=2048, avail=128, period=128, buf=256 60.215947: applptr: pcmC0D0p/sub0: prev=2048, curr=2176, avail=0, period=128, buf=256 ... We can surely see 'applptr' event is probed even if the application run for mmap programming scenario ('-M' option and 'hw' plugin). Below is a result of strace: 02:44:15.886382 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0 02:44:15.887203 poll([{fd=4, events=POLLOUT|POLLERR|POLLNVAL}], 1, -1) = 1 ([{fd=4, revents=POLLOUT}]) 02:44:15.887471 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0 02:44:15.887637 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0 02:44:15.887805 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0 02:44:15.887969 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0 02:44:15.888132 read(3, "..."..., 256) = 256 02:44:15.889040 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0 02:44:15.889221 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0 02:44:15.889431 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0 02:44:15.889606 poll([{fd=4, events=POLLOUT|POLLERR|POLLNVAL}], 1, -1) = 1 ([{fd=4, revents=POLLOUT}]) 02:44:15.889833 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0 02:44:15.889998 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0 02:44:15.890164 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0 02:44:15.891048 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0 02:44:15.891228 read(3, "..."..., 256) = 256 02:44:15.891497 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0 02:44:15.891661 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0 02:44:15.891829 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0 02:44:15.891991 poll([{fd=4, events=POLLOUT|POLLERR|POLLNVAL}], 1, -1) = 1 ([{fd=4, revents=POLLOUT}]) 02:44:15.893007 ioctl(4, SNDRV_PCM_IOCTL_SYNC_PTR, 0x56a32b30) = 0 We can see 7 calls of ioctl(2) with SNDRV_PCM_IOCTL_SYNC_PTR per loop with call of poll(2). 128 PCM frames are transferred per loop of one poll(2), because the PCM substream is configured with S16_LE format and 1 channel (2 byte * 1 * 128 = 256 bytes). This equals to the size of period of PCM buffer. Comparing to the probed data, one of the 7 calls of ioctl(2) is actually used to commit the number of copied PCM frames to kernel space. The other calls are just used to check runtime status of PCM substream; e.g. XRUN. The tracepoint event is useful to investigate this case. I note that below modules are related to the above sample. * snd-soc-dummy.ko * snd-soc-imx-sgtl5000.ko * snd-soc-fsl-ssi.ko * snd-soc-imx-pcm-dma.ko * snd-soc-sgtl5000.ko My additional note is lock acquisition. The event is probed under acquiring PCM stream lock. This means that calculation in the event is free from any hardware events. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-12ALSA: pcm: unify codes to operate application-side position on PCM bufferTakashi Sakamoto
In a series of recent work, ALSA PCM core got some arrangements to handle application-side position on PCM buffer. However, relevant codes still disperse to two translation units This commit unifies these codes into a helper function. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-12ALSA: seq: Allow the modular sequencer registrationTakashi Iwai
Many drivers bind the sequencer stuff in off-load by another driver module, so that it's loaded only on demand. In the current code, this mechanism doesn't work when the driver is built-in while the sequencer is module. We check with IS_REACHABLE() and enable only when the sequencer is in the same level of build. However, this is basically a overshoot. The binder code (snd-seq-device) is an individual module from the sequencer core (snd-seq), and we just have to make the former a built-in while keeping the latter a module for allowing the scenario like the above. This patch achieves that by rewriting Kconfig slightly. Now, a driver that provides the manual sequencer device binding should select CONFIG_SND_SEQ_DEVICE in a way as select SND_SEQ_DEVICE if SND_SEQUENCER != n Note that the "!=n" is needed here to avoid the influence of the sequencer core is module while the driver is built-in. Also, since rawmidi.o may be linked with snd_seq_device.o when built-in, we have to shuffle the code to make the linker happy. (the kernel linker isn't smart enough yet to handle such a case.) That is, snd_seq_device.c is moved to sound/core from sound/core/seq, as well as Makefile. Last but not least, the patch replaces the code using IS_REACHABLE() with IS_ENABLED(), since now the condition meets always when enabled. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-11ALSA: pcm: probe events when parameters are changed actuallyTakashi Sakamoto
At present, trace events are probed even if corresponding parameter is not actually changed. This is inconvenient. This commit improves the behaviour. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-11ALSA: pcm: return error immediately for parameters handlingTakashi Sakamoto
When refining mask/interval parameters, helper functions can return error code. This error is not handled immediately. This seems to return parameters to userspace applications in its meddle of processing. However, in general, when receiving error from system calls, the application might not handle argument buffer. It's reasonable to judge the above design as superfluity. This commit handles the error immediately. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09ALSA: seq: Reorganize kconfig and buildTakashi Iwai
This is a slightly intensive rewrite of Kconfig and Makefile about ALSA sequencer stuff. The first major change is that the kconfig items for the sequencer are moved to sound/core/seq/Kconfig. OK, that's easy. The substantial change is that, instead of hackish top-level module selection in Makefile, we define a Kconfig item for each sequencer module. The driver that requires such sequencer components select exclusively the kconfig items. This is more straightforward and standard way. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09ALSA: seq: Allow the tristate build of OSS emulationTakashi Iwai
Currently OSS sequencer emulation is tied with ALSA sequencer core, both are built in the same level; i.e. when CONFIG_SND_SEQUENCER=y, the OSS sequencer emulation is also always built-in, even though the functionality can be built as an individual module. This patch changes the rule and allows users to build snd-seq-oss module while others are built-in. Essentially, it's just a few simple changes in Kconfig and Makefile. Some driver codes like opl3 need to convert from the simple ifdef to IS_ENABLED(). But that's all. You might wonder how about the dependency: right, it can be messy, but it still works. Since we rewrote the sequencer binding with the standard bus, the driver can be bound at any time on demand. So, the synthesizer driver module can be loaded individually from the OSS emulation core before/after it. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09ALSA: Make CONFIG_SND_OSSEMUL user-selectableTakashi Iwai
Currently CONFIG_SND_OSSEMUL is selected by each config like CONFIG_SND_PCM_OSS. But, as see in the raw MIDI code that is built conditionally with CONFIG_SND_OSSEMUL, we should rather make CONFIG_SND_OSSEMUL user-selectable as the top kconfig item, and leave the rest depending on it. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09ALSA: pcm: use friendly name for id of PCM substream in trace printTakashi Sakamoto
Use the same print format of snd_pcm_debug_name() for userspace tracing program. Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09ALSA: pcm: add tracepoints for final selection process of hardware parametersTakashi Sakamoto
Results of ioctl(2) with SNDRV_PCM_IOCTL_HW_REFINE and SNDRV_PCM_IOCTL_HW_PARAMS are different, because the latter has single value for several parameters; e.g. channels of PCM substream. Selection of the single value is done independently of application of constraints. It's helpful for developers to trace the selection process. This commit adds tracepoints to snd_pcm_hw_params_choose() for the purpose. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09ALSA: pcm: localize snd_pcm_hw_params_choose()Takashi Sakamoto
As of v4.12, snd_pcm_hw_params_choose() is just called in a process context of ioctl(2) with SNDRV_PCM_IOCTL_HW_PARAMS. The function locates in a different file, which has no tracepoints. This commit moves the function to a file with the tracepoints for later commit. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09ALSA: pcm: move fixup of info flag after selecting single parametersTakashi Sakamoto
When drivers register no flags about information of PCM hardware, ALSA PCM core fixups it roughly. Currently, this operation places in a function snd_pcm_hw_refine(). It can be moved to a function fixup_unreferenced_params() because it doesn't affects operations between these two functions. This idea is better to bundle codes with similar purposes and this commit achieves it. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09ALSA: pcm: calculate non-mask/non-interval parameters always when possibleTakashi Sakamoto
A structure for parameters of PCM runtime has parameters which are not classified as mask/interval type. They are decided only when corresponding normal parameters have unique values. * struct snd_pcm_hw_params.msbits * struct snd_pcm_hw_params.rate_num * struct snd_pcm_hw_params.rate_den * struct snd_pcm_hw_params.fifo_size Current implementation of hw_params ioctl sometimes doesn't decide these parameters even if corresponding parameters are fixed, because these parameters are evaluated before a call of snd_pcm_hw_params_choose(). This commit adds a helper function to process the parameters and call it in proper positions. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-09ALSA: pcm: use helper functions to refer parameters as constantsTakashi Sakamoto
To fixup some parameters, ALSA PCM core refers the other parameters as constants. There're some macros for this purpose. This commit replaces codes with them. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-08ALSA: pcm: add comment about application of rule to PCM parametersTakashi Sakamoto
Drivers add rules of parameters to runtime of PCM substream, when applications open ALSA PCM character device. When applications call ioctl(2) with SNDRV_PCM_IOCTL_HW_REFINE or SNDRV_PCM_IOCTL_HW_PARAMS, the rules are applied to the parameters and return the result to user space. The rule can have dependency between parameters. Additionally, it can have condition flags about application of rules. Userspace applications can indicate the flags to suppress change of parameters. This commit attempts to describe the mechanism. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-08ALSA: pcm: use helper functions to check whether parameters are determinedTakashi Sakamoto
A commit 8bea869c5e56 ("ALSA: PCM midlevel: improve fifo_size handling") allows drivers to implement calculation of fifo size in parameter structure. This calculation runs only when two of the other parameters have single value. In ALSA PCM core, there're some helper functions for the case. This commit applies the functions instead of value comparison. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-08ALSA: pcm: adaption of code formattingTakashi Sakamoto
This commit modifies current for readability in below aspects: - use bool type variable instead of int type variable assigned to 0/1 - move variable definition from loop to top of the function definition Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-08ALSA: pcm: remove function local variable with alternative evaluationTakashi Sakamoto
A local variable is used to judge whether a parameter should be handled due to reverse dependency of the other rules. However, this can be obsoleted by check of a sentinel in dependency array. This commit removes the local variable and check the sentinel to reduce stack usage. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-08ALSA: pcm: use goto statement instead of while statement to reduce indentationTakashi Sakamoto
In a process to calculate parameters of PCM substream, application of all rules is iterated several times till parameter dependencies are satisfied. In current implementation, two loops are used for the design, however this brings two-level indentation and decline readability. This commit attempts to reduce the indentation by using goto statement, instead of outer while loop. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-08ALSA: pcm: add a helper function to apply parameter rulesTakashi Sakamoto
Application of rules to parameters of PCM substream is done in a call of snd_pcm_hw_refine(), while the function includes much codes and is not enough friendly to readers. This commit splits the codes to a separated function so that readers can get it easily. I leave desicion into compilers to merge the function into its callee. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-08ALSA: pcm: add a helper function to constrain interval-type parametersTakashi Sakamoto
Application of constraints to interval-type parameters for PCM substream is done in a call of snd_pcm_hw_refine(), while the function includes much codes and is not enough friendly to readers. This commit splits the codes to a separated function so that readers can get it easily. I leave desicion into compilers to merge the function into its callee. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-08ALSA: pcm: add a helper function to constrain mask-type parametersTakashi Sakamoto
Application of constraints to mask-type parameters for PCM substream is done in a call of snd_pcm_hw_refine(), while the function includes much codes and is not enough friendly to readers. This commit splits the codes to a separated function so that readers can get it easily. I leave desicion into compilers to merge the function into its callee. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-07ALSA: pcm: obsolete RULES_DEBUG local macroTakashi Sakamoto
Added tracepoints obsoleted RULES_DEBUG local macro and relevant codes. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-07ALSA: pcm: enable parameter tracepoints only when CONFIG_SND_DEBUG is enabledTakashi Sakamoto
In a previous commit, tracepoints are added for PCM parameter processing. As long as I know, this implementation increases size of relocatable object by 35%. For vendors who are conscious of memory footprint, it brings apparent disadvantage. This commit utilizes CONFIG_SND_DEBUG configuration to enable/disable the tracepoints. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>