summaryrefslogtreecommitdiff
path: root/sound/hda
AgeCommit message (Collapse)Author
2019-03-15Merge tag 'sound-fix-5.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Some cleaning after the first batch; mostly about HD-audio quirks but also some NULL dereference fixes in corner cases and a random build error fix, too" * tag 'sound-fix-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Add support headset mode for New DELL WYSE NB ALSA: hda/realtek - Add support headset mode for DELL WYSE AIO ALSA: hda/realtek: merge alc_fixup_headset_jack to alc295_fixup_chromebook ALSA: pcm: Fix function name in kernel-doc comment ALSA: hda: hdmi - add Icelake support ALSA: hda - add more quirks for HP Z2 G4 and HP Z240 ALSA: hda/realtek - Fixed Headset Mic JD not stable ALSA: hda/realtek: Enable headset MIC of Acer TravelMate X514-51T with ALC255 ALSA: hda/tegra: avoid build error without CONFIG_PM ALSA: usx2y: Fix potential NULL pointer dereference ALSA: hda: Avoid NULL pointer dereference at snd_hdac_stream_start()
2019-03-13ALSA: hda: Avoid NULL pointer dereference at snd_hdac_stream_start()Mariusz Ceier
For ca0132 codec, azx_dev->stream is NULL during firmware loading. Calling snd_hdac_get_stream_stripe_ctl unconditionally causes NULL pointer dereference in that function. Fixes: 9b6f7e7a296e ("ALSA: hda: program stripe bits for controller") Signed-off-by: Mariusz Ceier <mceier+kernel@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-03-06Merge tag 'char-misc-5.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver patch pull request for 5.1-rc1. The largest thing by far is the new habanalabs driver for their AI accelerator chip. For now it is in the drivers/misc directory but will probably move to a new directory soon along with other drivers of this type. Other than that, just the usual set of individual driver updates and fixes. There's an "odd" merge in here from the DRM tree that they asked me to do as the MEI driver is starting to interact with the i915 driver, and it needed some coordination. All of those patches have been properly acked by the relevant subsystem maintainers. All of these have been in linux-next with no reported issues, most for quite some time" * tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (219 commits) habanalabs: adjust Kconfig to fix build errors habanalabs: use %px instead of %p in error print habanalabs: use do_div for 64-bit divisions intel_th: gth: Fix an off-by-one in output unassigning habanalabs: fix little-endian<->cpu conversion warnings habanalabs: use NULL to initialize array of pointers habanalabs: fix little-endian<->cpu conversion warnings habanalabs: soft-reset device if context-switch fails habanalabs: print pointer using %p habanalabs: fix memory leak with CBs with unaligned size habanalabs: return correct error code on MMU mapping failure habanalabs: add comments in uapi/misc/habanalabs.h habanalabs: extend QMAN0 job timeout habanalabs: set DMA0 completion to SOB 1007 habanalabs: fix validation of WREG32 to DMA completion habanalabs: fix mmu cache registers init habanalabs: disable CPU access on timeouts habanalabs: add MMU DRAM default page mapping habanalabs: Dissociate RAZWI info from event types misc/habanalabs: adjust Kconfig to fix build errors ...
2019-02-25ALSA: hda: Extend i915 component bind timeoutTakashi Iwai
I set 10 seconds for the timeout of the i915 audio component binding with a hope that recent machines are fast enough to handle all probe tasks in that period, but I was too optimistic. The binding may take longer than that, and this caused a problem on the machine with both audio and graphics driver modules loaded in parallel, as Paul Menzel experienced. This problem haven't hit so often just because the KMS driver is loaded in initrd on most machines. As a simple workaround, extend the timeout to 60 seconds. Fixes: f9b54e1961c7 ("ALSA: hda/i915: Allow delayed i915 audio component binding") Reported-by: Paul Menzel <pmenzel+alsa-devel@molgen.mpg.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-02-08i915/snd_hdac: I915 subcomponent for the snd_hdacDaniel Vetter
Since we need multiple components for I915 for different purposes (Audio & Mei_hdcp), we adopt the subcomponents methodology introduced by the previous patch (mentioned below). Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Mon Jan 28 17:08:20 2019 +0530 components: multiple components for a device Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by-by: Ramalingam C <ramalinagm.c@intel.com> (commit message) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> (code) cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> cc: Russell King <rmk+kernel@arm.linux.org.uk> cc: Rafael J. Wysocki <rafael@kernel.org> cc: Jaroslav Kysela <perex@perex.cz> cc: Takashi Iwai <tiwai@suse.com> cc: Rodrigo Vivi <rodrigo.vivi@intel.com> cc: Jani Nikula <jani.nikula@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20190207232759.14553-4-daniel.vetter@ffwll.ch
2019-01-14ALSA: hda: program stripe bits for controllerSameer Pujar
Platforms having multiple SORs and hdmi/dp sinks require higher bandwidth to support simultaneous playbacks of higher resolution. If hda controller supports multiple SDO lines, STRIPE can be used to indicate how many of the SDO lines the stream should be striped across. During stream start stripe control bits are programmed to use given number of sdo lines and the same is cleared during stream stop. Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Mohan Kumar D <mkumard@nvidia.com> Reviewed-by: Ravindra Lokhande <rlokhande@nvidia.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-14ALSA: hda: Add api to program stripe control bitsSameer Pujar
Controllers and codecs can support striping of audio out across multiple SDO lines. The number of supported SDO lines can be specific to chip. GCAP register can be read to know the maximum supported SDO lines. snd_hdac_get_stream_stripe_ctl() is exposed to program stripe bits on controller and codec side. stripe value: 0 for 1SDO, 1 for 2SDO, 2 for 4SDO lines, etc., Signed-off-by: Sameer Pujar <spujar@nvidia.com> Reviewed-by: Mohan Kumar D <mkumard@nvidia.com> Reviewed-by: Ravindra Lokhande <rlokhande@nvidia.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-09ALSA: hda: Fix a mask wrong issue in snd_hdac_stream_start()Keyon Jie
To enable SIE(Stream Interrupt Enable) in snd_hdac_stream_start(), we should set both mask and value to be "1 << azx_dev->index" for register update, the mask was 0, here fix it. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-01-09ALSA: hda: Fix mismatches for register mask and value in hdac controllerKeyon Jie
E.g. for azx_int_enable(), we should set both mask and value to be "AZX_INT_CTRL_EN | AZX_INT_GLOBAL_EN"(the mask was 0) to enable controller CIE and GIE. We have similar issues on setting AZX_GCTL_RESET and AZX_GCTL_UNSOL, here try to correct all of them. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-12-19ALSA: HDA: export process_unsol_events()Keyon Jie
The SOF implementation does not rely on the hdac_bus library, however for HDMI and HDaudio codec support it does need to deal with unsolicited events. Instead of re-inventing the wheel, export this symbol to reuse this part of the library directly. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-12-11ALSA: hda: Make snd_hdac_display_power() void functionTakashi Iwai
After the recent refactoring, snd_hdac_display_power() doesn't return any error, hence it can be defined to return void. This makes many error checks redundant and allows us to reduce them gracefully. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-12-11ALSA: hda: Refactor display power managementTakashi Iwai
The current HD-audio code manages the DRM audio power via too complex redirections, and this seems even still unbalanced in a corner case as Intel DRM CI has been intermittently reporting. This patch is a big surgery for addressing the complexity and the possible unbalance. Basically the patch changes the display PM in the following ways: - Both HD-audio controller and codec drivers call a single helper, snd_hdac_display_power(). (Formerly, the display power control from a codec was done indirectly via link_power bus ops.) - snd_hdac_display_power() receives the codec address index. For turning on/off from the controller, pass HDA_CODEC_IDX_CONTROLLER. - snd_hdac_display_power() doesn't manage refcounts any longer, but keeps the power status in bitmap. If any of controller or codecs is turned on, the function updates the DRM power state via get_power() or put_power(). Also this refactor allows us more cleanup: - The link_power bus ops is dropped, so there is no longer indirect management, as mentioned in the above. - hdac_device link_power_control flag is moved to hda_codec display_power_control flag, as it's only for HDA legacy. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=106525 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-25Merge tag 'sound-4.20-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "There have been little changes in ALSA core stuff, but ASoC core still kept rolling for the continued restructuring. The rest are lots of small driver-specific changes and some minor API updates. Here are highlights: General: - Appropriate fall-through annotations everywhere - Some code cleanup in memalloc code, handling non-cacahed pages more commonly in the helper - Deployment of SNDRV_PCM_INFO_SYNC_APPLPTR flag consistently Drivers: - More HD-audio CA0132 codec improvement for supporting other Creative boards - Plumbing legacy HD-audio codecs as ASoC BE on Intel SST; this will give move support of existing HD-audio devices with DSP - A few device-specific HD-audio quirks as usual - New quirk for RME CC devices and correction for B&W PX for USB-audio - FireWire: code refactoring including devres usages ASoC Core: - Continued componentization works; it's almost done! - A bunch of new for_each_foo macros - Cleanups and fixes in DAPM code ASoC Drivers: - MCLK support for several different devices, including CS42L51, STM32 SAI, and MAX98373 - Support for Allwinner A64 CODEC analog, Intel boards with DA7219 and MAX98927, Meson AXG PDM inputs, Nuvoton NAU8822, Renesas R8A7744 and TI PCM3060" * tag 'sound-4.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (299 commits) ASoC: stm32: sai: fix master clock naming ASoC: stm32: add clock dependency for sai ALSA: hda/ca0132 - Actually fix microphone issue ASoC: sun4i-i2s: move code from startup/shutdown hooks into pm_runtime hooks ASoC: wm2000: Remove wm2000_read helper function ASoC: cs42l51: fix mclk support ASoC: wm_adsp: Log addresses as 8 digits in wm_adsp_buffer_populate ASoC: wm_adsp: Rename memory fields in wm_adsp_buffer ASoC: cs42l51: add mclk support ASoC: stm32: sai: set sai as mclk clock provider ASoC: dt-bindings: add mclk support to cs42l51 ASoC: dt-bindings: add mclk provider support to stm32 sai ASoC: soc-core: fix trivial checkpatch issues ASoC: dapm: Add support for hw_free on CODEC to CODEC links ASoC: Intel: kbl_da7219_max98927: minor white space clean up ALSA: i2c/cs8427: Fix int to char conversion ALSA: doc: Brush up the old writing-an-alsa-driver ASoC: rsnd: tidyup SSICR::SWSP for TDM ASoC: rsnd: enable TDM settings for SSI parent ASoC: pcm3168a: add hw constraint for capture channel ...
2018-10-21Merge remote-tracking branches 'regmap/topic/noinc' and ↵Mark Brown
'regmap/topic/single-rw' into regmap-next
2018-10-04Merge branch 'for-linus' into for-nextTakashi Iwai
Back-merge 4.19-devel branch into 4.20 for applying FireWire patches cleanly. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-10-02ALSA: hda: Fix mismatch for register mask and value in ext controller.Keyon Jie
E.g. for snd_hdac_ext_bus_link_power_up(), we should set mask to be AZX_MLCTL_SPA(it was 0), and AZX_MLCTL_SPA as value to power up it, here correct it and several similar mismatches. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-20ALSA: hda: Fix the audio-component completion timeoutTakashi Iwai
The timeout of audio component binding was incorrectly specified in msec, not in jiffies, which results in way too shorter timeout than expected. Along with fixing it, add the information print about the binding failure to show the unexpected situation more clearly. Fixes: a57942bfdd61 ("ALSA: hda: Make audio component support more generic") Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-09-17Merge tag 'asoc-v4.19-rc4' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.19 This is the usual set of small fixes scatterd around various drivers, plus one fix for DAPM and a UAPI build fix. There's not a huge amount that stands out here relative to anything else.
2018-09-12sound: don't call skl_init_chip() to reset intel skl socYu Zhao
Internally, skl_init_chip() calls snd_hdac_bus_init_chip() which 1) sets bus->chip_init to prevent multiple entrances before device is stopped; 2) enables interrupt. We shouldn't use it for the purpose of resetting device only because 1) when we really want to initialize device, we won't be able to do so; 2) we are ready to handle interrupt yet, and kernel crashes when interrupt comes in. Rename azx_reset() to snd_hdac_bus_reset_link(), and use it to reset device properly. Fixes: 60767abcea3d ("ASoC: Intel: Skylake: Reset the controller in probe") Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-12sound: enable interrupt after dma buffer initializationYu Zhao
In snd_hdac_bus_init_chip(), we enable interrupt before snd_hdac_bus_init_cmd_io() initializing dma buffers. If irq has been acquired and irq handler uses the dma buffer, kernel may crash when interrupt comes in. Fix the problem by postponing enabling irq after dma buffer initialization. And warn once on null dma buffer pointer during the initialization. Reviewed-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Yu Zhao <yuzhao@google.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-07regmap: split up regmap_config.use_single_rwDavid Frey
Split regmap_config.use_single_rw into use_single_read and use_single_write. This change enables drivers of devices which only support bulk operations in one direction to use the regmap_bulk_*() functions for both directions and have their bulk operation split into single operations only when necessary. Update all struct regmap_config instances where use_single_rw==true to instead set both use_single_read and use_single_write. No attempt was made to evaluate whether it is possible to set only one of use_single_read or use_single_write. Signed-off-by: David Frey <dpfrey@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-03ALSA: hda: Fix several mismatch for register mask and valueKeyon Jie
E.g. for snd_hdac_ext_link_clear_stream_id(), we should set (1 << stream) as mask, and 0 as value, here correct it and several similar mismatches. And, here also remove unreadable register_mask usage for those mask value updating. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-27ALSA: hda: Proper endian notations for BDL pointersTakashi Iwai
The BDL pointer used in snd_hdac_dsp_prepare() should be declared as __le32, as warned by sparse: sound/hda/hdac_stream.c:655:47: warning: incorrect type in argument 4 (different base types) sound/hda/hdac_stream.c:655:47: expected restricted __le32 [usertype] **bdlp sound/hda/hdac_stream.c:655:47: got unsigned int [usertype] **<noident> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-27ALSA: hda: Fix implicit PCM format type conversionTakashi Iwai
The PCM format type is defined with __bitwise, hence it can't be passed as integer but needs an explicit cast. In this patch, instead of the messy cast flood, define the format argument of snd_hdac_calc_stream_format() to be the proper snd_pcm_format_t type. This fixes sparse warnings like: sound/hda/hdac_device.c:760:38: warning: incorrect type in argument 1 (different base types) Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-24ALSA: hda/i915: Allow delayed i915 audio component bindingTakashi Iwai
Currently HD-audio i915 audio binding doesn't support any delayed binding, and supposes that the i915 driver registers the component immediately. This has been OK, so far, but the work-in-progress change in i915 may introduce the asynchronous binding, which effectively delays the component registration. For addressing it, implement a completion to be synced with the master binding. The timeout is set to 10 seconds which should be long enough and hopefully be not too annoying if anyone boots up a debugging session with i915 KMS turned off. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-17ALSA: hda: Make audio component support more genericTakashi Iwai
This is the final step for more generic support of DRM audio component. The generic audio component code is now moved to its own file, and the symbols are renamed from snd_hac_i915_* to snd_hdac_acomp_*, respectively. The generic code is enabled via the new kconfig, CONFIG_SND_HDA_COMPONENT, while CONFIG_SND_HDA_I915 is kept as the super-class. Along with the split, three new callbacks are added to audio_ops: pin2port is for providing the conversion between the pin number and the widget id, and master_bind/master_unbin are called at binding / unbinding the master component, respectively. All these are optional, but used in i915 implementation and also other later implementations. A note about the new snd_hdac_acomp_init() function: there is a slight difference between this and the old snd_hdac_i915_init(). The latter (still) synchronizes with the master component binding, i.e. it assures that the relevant DRM component gets bound when it returns, or gives a negative error. Meanwhile the new function doesn't synchronize but just leaves as is. It's the responsibility by the caller's side to synchronize, or the caller may accept the asynchronous binding on the fly. v1->v2: Fix missing NULL check in master_bind/unbind Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-17ALSA: hda/i915: Associate audio component with devresTakashi Iwai
The HD-audio i915 binding code contains a single pointer, hdac_acomp, for allowing the access to audio component from the master bind/unbind callbacks. This was needed because the callbacks pass only the device pointer and we can't guarantee the object type assigned to the drvdata (which is free for each controller driver implementation). And this implementation will be a problem if we support multiple components for different DRM drivers, not only i915. As a solution, allocate the audio component object via devres and associate it with the given device, so that the component callbacks can refer to it via devres_find(). The removal of the object is still done half-manually via devres_destroy() to make the code consistent (although it may work without the explicit call). Also, the snd_hda_i915_register_notifier() had the reference to hdac_acomp as well. In this patch, the corresponding code is removed by passing hdac_bus object to the function, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-07-17drm/i915: Split audio component to a generic typeTakashi Iwai
For allowing other drivers to use the DRM audio component, rename the i915_audio_component_* with drm_audio_component_*, and split the generic part into drm_audio_component.h. The i915 specific stuff remains in struct i915_audio_component, which contains drm_audio_component as the base. The license of drm_audio_component.h is kept to MIT as same as the the original i915_component.h. This is a preliminary change for further development, and no functional changes by this patch itself, merely code-split and renames. v1->v2: Use SPDX for drm_audio_component.h, fix remaining i915 argument in drm_audio_component.h Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-28ALSA: hdac: add extended ops in the hdac_busRakesh Ughreja
Add extended ops in the hdac_bus to allow calling the ASoC HDAC library ops to reuse the legacy HDA codec drivers with ASoC framework. Extended ops are used by the legacy codec drivers to call into hdac_hda library, in the subsequent patches.. Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-28ALSA: hdac: remove memory allocation from snd_hdac_ext_bus_device_initRakesh Ughreja
Remove memory allocation within snd_hdac_ext_bus_device_init, to make its behaviour identical to snd_hdac_bus_device_init. So that caller can allocate the parent data structure containing hdac_device. This API change helps in reusing the legacy HDA codec drivers with ASoC platform drivers. Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-28ALSA: hdac: ext: add wait for codec to respond after link resetRakesh Ughreja
As per HDA spec section 4.3 - Codec Discovery, the software shall wait for atleast 521usec for codec to respond after link reset. With the multi-link capability each link is turned ON/OFF individually. Link controller drives reset signal when it is turned ON. Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-28ALSA: hdac: Remove usage of struct hdac_ext_driver, use hdac_driver insteadRakesh Ughreja
This patch removes the hdac_ext_driver structure. The legacy and enhanced HDaudio capabilities can be handled in a backward-compatible way without separate definitions. Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-28ALSA: hdac: Remove usage of struct hdac_ext_bus and use hdac_bus insteadRakesh Ughreja
This patch removes the hdac_ext_bus structure. The legacy and enhanced HDaudio capabilities can be handled in a backward-compatible way without separate definitions. Follow-up patches in this series handle the driver definition. Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-06-28ALSA: hdac: Remove usage of struct hdac_ext_device and use hdac_device insteadRakesh Ughreja
This patch removes the hdac_ext_device structure. The legacy and enhanced HDaudio capabilities can be handled in a backward-compatible way without separate definitions. Follow-up patches in this series handle the bus and driver definitions. Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-04-24ALSA: hda - Use a macro for snd_array iteration loopsTakashi Iwai
Introduce a new helper macro, snd_array_for_each(), to iterate for each snd_array element. It slightly improves the readability than lengthy open codes at each place. Along with it, add const prefix to some obvious places. There should be no functional changes by this. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-02-12ALSA: hda: Copying sync power state helper to coreAbhijeet Kumar
The current sync_power_state is local to hda code, moving it core so that other users apart from hda legacy can use it. The helper function ensures the actual state reaches the target state. Signed-off-by: Abhijeet Kumar <abhijeet.kumar@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2018-01-05Merge remote-tracking branches 'asoc/topic/dai-drv', 'asoc/topic/davinci', ↵Mark Brown
'asoc/topic/disconnect', 'asoc/topic/ep93xx' and 'asoc/topic/eukrea-tlv320' into asoc-next
2017-12-22ALSA: hda: Drop useless WARN_ON()Takashi Iwai
Since the commit 97cc2ed27e5a ("ALSA: hda - Fix yet another i915 pointer leftover in error path") cleared hdac_acomp pointer, the WARN_ON() non-NULL check in snd_hdac_i915_register_notifier() may give a false-positive warning, as the function gets called no matter whether the component is registered or not. For fixing it, let's get rid of the spurious WARN_ON(). Fixes: 97cc2ed27e5a ("ALSA: hda - Fix yet another i915 pointer leftover in error path") Cc: <stable@vger.kernel.org> Reported-by: Kouta Okamoto <kouta.okamoto@toshiba.co.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-12-01ASoC: hdac_hdmi: clean up hdac_device variable namesUghreja, Rakesh A
This patch renames all the variable instances of hdac_device with hdev to prepare the code base to remove the usage of hdac_ext_device data structures done in the following patches. Existing code uses hdev and hdac as variable names for hdac_device as well as hdac_ext_device, which creates confusion. Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-17ALSA: hda: Fix too short HDMI/DP chmap reportingTakashi Iwai
We got a regression report about the HD-audio HDMI chmap, where some surround channels are reported as UNKNOWN. The git bisection pointed the culprit at the commit 9b3dc8aa3fb1 ("ALSA: hda - Register chmap obj as priv data instead of codec"). The story behind scene is like this: - While moving the code out of the legacy HDA to the HDA common place, the patch modifies the code to obtain the chmap array indirectly in a byte array, and it expands it to kctl value array. - At the latter operation, the size of the array is wrongly passed by sizeof() to the pointer. - It can be 4 on 32bit arch, thus too short for 6+ channels. (And that's the reason why it didn't hit other persons; it's 8 on 64bit arch, thus it's usually enough.) The code was further changed meanwhile, but the problem persisted. Let's fix it by correctly evaluating the array size. Fixes: 9b3dc8aa3fb1 ("ALSA: hda - Register chmap obj as priv data instead of codec") Reported-by: VDR User <user.vdr@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-11-13Merge tag 'asoc-v4.15' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v4.15 The biggest thing this release has been the conversion of the AC98 bus to the driver model, that's been a long time coming so thanks to Robert Jarzmik for his dedication there. Due to there being some AC97 MFD there's a few fairly large changes in input and the MFD layer, mainly to the wm97xx driver. There's also some drivers/drm changes to support the new AMD Stoney platform, these are shared with the DRM subsystem and should be being merged via both. Within the subsystem the overwhelming bulk of the changes is in the Intel drivers which continue to need lots of cleanups and fixes, this release they've also gained support for their open source firmware. There's also some large changs in the core as Morimoto-san continues to mirror operations into the component level in preparation for conversion of drivers to that. - The AC97 bus has finally caught up with the driver model thanks to some dedicated and persistent work from Robert Jarzmik. - Continued work from Morimoto-san on moving us towards being able to use components for everything. - Lots of cleanups for the Intel platform code, including support for their open source audio firmware. - Support for scaling MCLK with sample rate in simple-card. - Support for AMD Stoney platform.
2017-11-13Merge branch 'for-next' into for-linusTakashi Iwai
Pull 4.15 updates to take over the previous urgent fixes. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-24ALSA: hda: Abort capability probe on invalid capabilityRakesh Ughreja
On reading wrong capability pointer values driver may crash, so whenever driver discovers unknown HDA capability, log it as error and stop traversing the link list further. Signed-off-by: Rakesh Ughreja <rakesh.a.ughreja@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-19ALSA: hda: Avoid racy recreation of widget kobjectsTakashi Iwai
The refresh of HD-audio widget sysfs kobjects via snd_hdac_refresh_widget_sysfs() is slightly racy. The driver recreates the whole tree from scratch after deleting the whole. When CONFIG_DEBUG_KOBJECT_RELEASE option is used, kobject release doesn't happen immediately but delayed, while the re-creation of the same named kobject happens soon after invoking kobject_put(). This may end up with the conflicts of duplicated kobjects, as found in the bug report below. In this patch, we take another approach to refresh the tree: instead of recreating the whole tree, just add the new nodes and delete the non-existing nodes. Since the refresh happens only once at initialization, no longer race would happen. Along with the code change, merge snd_hdac_refresh_widget_sysfs() with the existing snd_hdac_refresh_widgets() with an additional bool flag for simplifying the code. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197307 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-10-18ALSA: hda: Abort capability probe at invalid register readTakashi Iwai
The loop in snd_hdac_bus_parse_capabilities() may go to nirvana when it hits an invalid register value read: BUG: unable to handle kernel paging request at ffffad5dc41f3fff IP: pci_azx_readl+0x5/0x10 [snd_hda_intel] Call Trace: snd_hdac_bus_parse_capabilities+0x3c/0x1f0 [snd_hda_core] azx_probe_continue+0x7d5/0x940 [snd_hda_intel] ..... This happened on a new Intel machine, and we need to check the value and abort the loop accordingly. [Note: the fixes tag below indicates only the commit where this patch can be applied; the original problem was introduced even before that commit] Fixes: 6720b38420a0 ("ALSA: hda - move bus_parse_capabilities to core") Cc: <stable@vger.kernel.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-07-18ALSA: hda: constify pci_device_id.Arvind Yadav
pci_device_id are not supposed to change at runtime. All functions working with pci_device_id provided by <linux/pci.h> work with const pci_device_id. So mark the non-const structs as const. File size before: text data bss dec hex filename 2610 304 8 2922 b6a sound/hda/hdac_i915.o File size After adding 'const': text data bss dec hex filename 2674 240 8 2922 b6a sound/hda/hdac_i915.o Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-06-20ALSA: hda: Fix potential race at unregistration and unsol eventsTakashi Iwai
When the codec device is unregistered / freed, it may release the resource while being used in an unsolicited event like the jack detection work. This leads to use-after-free. The fix here is to unregister the device at first, i.e. removing the codec from the list, then flushing the pending works to assure that all unsol events are gone. After this point, we're free from accessing the codec via unsol events, thus can release the resources gracefully. The issue was spotted originally by Intel CI, but it couldn't be reproduced reliably by its nature. So let's hope this fix really addresses the whole issues. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196045 Reported-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-10ALSA: hda: Fix cpu lockup when stopping the cmd dmasJeeja KP
Using jiffies in hdac_wait_for_cmd_dmas() to determine when to time out when interrupts are off (snd_hdac_bus_stop_cmd_io()/spin_lock_irq()) causes hard lockup so unlock while waiting using jiffies. ---<-snip->--- <0>[ 1211.603046] NMI watchdog: Watchdog detected hard LOCKUP on cpu 3 <4>[ 1211.603047] Modules linked in: snd_hda_intel i915 vgem <4>[ 1211.603053] irq event stamp: 13366 <4>[ 1211.603053] hardirqs last enabled at (13365): ... <4>[ 1211.603059] Call Trace: <4>[ 1211.603059] ? delay_tsc+0x3d/0xc0 <4>[ 1211.603059] __delay+0xa/0x10 <4>[ 1211.603060] __const_udelay+0x31/0x40 <4>[ 1211.603060] snd_hdac_bus_stop_cmd_io+0x96/0xe0 [snd_hda_core] <4>[ 1211.603060] ? azx_dev_disconnect+0x20/0x20 [snd_hda_intel] <4>[ 1211.603061] snd_hdac_bus_stop_chip+0xb1/0x100 [snd_hda_core] <4>[ 1211.603061] azx_stop_chip+0x9/0x10 [snd_hda_codec] <4>[ 1211.603061] azx_suspend+0x72/0x220 [snd_hda_intel] <4>[ 1211.603061] pci_pm_suspend+0x71/0x140 <4>[ 1211.603062] dpm_run_callback+0x6f/0x330 <4>[ 1211.603062] ? pci_pm_freeze+0xe0/0xe0 <4>[ 1211.603062] __device_suspend+0xf9/0x370 <4>[ 1211.603062] ? dpm_watchdog_set+0x60/0x60 <4>[ 1211.603063] async_suspend+0x1a/0x90 <4>[ 1211.603063] async_run_entry_fn+0x34/0x160 <4>[ 1211.603063] process_one_work+0x1f4/0x6d0 <4>[ 1211.603063] ? process_one_work+0x16e/0x6d0 <4>[ 1211.603064] worker_thread+0x49/0x4a0 <4>[ 1211.603064] kthread+0x107/0x140 <4>[ 1211.603064] ? process_one_work+0x6d0/0x6d0 <4>[ 1211.603065] ? kthread_create_on_node+0x40/0x40 <4>[ 1211.603065] ret_from_fork+0x2e/0x40 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100419 Fixes: 38b19ed7f81ec ("ALSA: hda: fix to wait for RIRB & CORB DMA to set") Reported-by: Marta Lofstedt <marta.lofstedt@intel.com> Suggested-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> CC: stable <stable@vger.kernel.org> # 4.7 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-02Merge tag 'asoc-v4.12' of ↵Takashi Iwai
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v4.12 A quiet release for the core, but lots of new drivers this time around: - A new, generalized, API for hooking up jacks which makes it easier to write generic machine drivers for simple cases. - Continuing fixes for issues with the x86 CPU drivers. - New drivers for Cirrus CS35L35, DIO DIO2125, Everest ES7132, HiSilicon hi6210, Maxim MAX98927, MT2701 systems with WM8960, Nuvoton NAU8824, Odroid systems, ST STM32 SAI controllers and x86 systems with DA7213