summaryrefslogtreecommitdiff
path: root/sound/soc/codecs/ad193x.h
AgeCommit message (Collapse)Author
2021-08-03ASoC: codecs: ad193x: add support for 96kHz and 192kHz playback ratesCodrin Ciubotariu
ad193x devices support 96KHz and 192KHz sampling rates, when PLL/MCLK is referenced to 48kHz. Tested on ad1934. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20210803104825.2198335-1-codrin.ciubotariu@microchip.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 149Thomas Gleixner
Based on 1 normalized pattern(s): licensed under the gpl 2 or later extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 82 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190524100845.150836982@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-02-18ASoC: codecs: ad193x: Add support to disable on-chip PLLCodrin Ciubotariu
The on-chip PLL can be disabled if on the MCLKI pin we have an external clock at 512 x fs. This clock can be used as direct internal clock for ADCs or DACs. To support this, we add an extra clock id that can be configured using the set_sysclk() callback. Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-05ASoC: ad193x: add support to ad1934Cyrille Pitchen
The AD1934 codec has no ADC feature. Hence it register mapping is slightly different from the register mapping of other members of the AD193x family. Some ASoC controls and widgets are related to the DAC feature so are not relevant in the case of an AD1934 codec. Signed-off-by: Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-02-18ASoC: ad193x: Split SPI and I2C code into different modulesLars-Peter Clausen
There are a few known (minor) problems with having the support code for both I2C and SPI in the same module: * We need to be extra careful to make sure to not build the driver into the kernel if one of the subsystems is build as a module (Currently only I2C can be build as a module). * The module init path error handling is rather ugly. E.g. what should be done if either the SPI or the I2C driver fails to register? Most drivers that implement SPI and I2C in the same module currently fallback to undefined behavior in that case. Splitting the the driver into two modules, one for each bus, allows the registration of the other bus driver to continue without problems if one of them fails. This patch splits the AD193X driver into 3 modules. One core module that implements the device logic, but is independent of the bus method used. And one module for SPI and I2C each that registers the drivers and sets up the regmap struct for the bus. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@linaro.org>
2011-11-28ASoC: ad193x: Use snd_soc_update_bits where appropriateLars-Peter Clausen
We can reduce the code size here a bit by using snd_soc_update_bits instead of open-coding the read-modify-write cycle. The conversion done in this patch is not completely straightforward and some minor code restructuring has been incorporated to further reduce the code size. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-10-14ASoC: ad193x: Fix define of AD193X_PLL_INPUT_MASKAxel Lin
Current code defines AD193X_PLL_INPUT_MASK as (~0x6) which is quite different from other MASK defines. To make it consistent with other mask defines, define AD193X_PLL_INPUT_MASK as 0x6 and change the code accordingly. I think this change improves the readability. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-09-09ASoC: ad193x: Setup regmap read and write flag masks for SPILars-Peter Clausen
Currently register read-back for the ad193x is broken, because it expects bit 0 of the upper byte to be set to indicate a read operation, while the regmap default for SPI is to use bit 7. This patch also addresses another oddity of the device. There are SPI and I2C versions of this codec. In both cases the registers are 8-bit wide and numbered from 0x0 to 0x10, but in the SPI case there is also a so called 'global address' which is prefixed in-front of the register address. The global address mimics I2C behaviour and includes a static device address the and the read/write flag. This basically extends the register address to an 16-bit value numbered from 0x800 to 0x810. These are the register numbers which are currently used by the driver. This works, because I2C will ignore the upper 8 bits of the register, but it is still a bit confusing, as there are no such register numbers in the I2C case. The approach taken by this patch is to number the registers from 0x00 to 0x10 and encode the global address for SPI mode into the read and write flag masks. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Acked-by: Liam Girdwood <lrg@ti.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2011-08-15ASoC: ad193x: fix dac word len settingScott Jiang
dac word len value should left shift before setting Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Acked-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2011-08-15ASoC: ad193x: fix registers definitionScott Jiang
fix dac word len mask and adc tdm fmt shift value Signed-off-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: stable@kernel.org
2010-08-12ASoC: multi-component - ASoC Multi-Component SupportLiam Girdwood
This patch extends the ASoC API to allow sound cards to have more than one CODEC and more than one platform DMA controller. This is achieved by dividing some current ASoC structures that contain both driver data and device data into structures that only either contain device data or driver data. i.e. struct snd_soc_codec ---> struct snd_soc_codec (device data) +-> struct snd_soc_codec_driver (driver data) struct snd_soc_platform ---> struct snd_soc_platform (device data) +-> struct snd_soc_platform_driver (driver data) struct snd_soc_dai ---> struct snd_soc_dai (device data) +-> struct snd_soc_dai_driver (driver data) struct snd_soc_device ---> deleted This now allows ASoC to be more tightly aligned with the Linux driver model and also means that every ASoC codec, platform and (platform) DAI is a kernel device. ASoC component private data is now stored as device private data. The ASoC sound card struct snd_soc_card has also been updated to store lists of it's components rather than a pointer to a codec and platform. The PCM runtime struct soc_pcm_runtime now has pointers to all its components. This patch adds DAPM support for ASoC multi-component and removes struct snd_soc_socdev from DAPM core. All DAPM calls are now made on a card, codec or runtime PCM level basis rather than using snd_soc_socdev. Other notable multi-component changes:- * Stream operations now de-reference less structures. * close_delayed work() now runs on a DAI basis rather than looping all DAIs in a card. * PM suspend()/resume() operations can now handle N CODECs and Platforms per sound card. * Added soc_bind_dai_link() to bind the component devices to the sound card. * Added soc_dai_link_probe() and soc_dai_link_remove() to probe and remove DAI link components. * sysfs entries can now be registered per component per card. * snd_soc_new_pcms() functionailty rolled into dai_link_probe(). * snd_soc_register_codec() now does all the codec list and mutex init. This patch changes the probe() and remove() of the CODEC drivers as follows:- o Make CODEC driver a platform driver o Moved all struct snd_soc_codec list, mutex, etc initialiasation to core. o Removed all static codec pointers (drivers now support > 1 codec dev) o snd_soc_register_pcms() now done by core. o snd_soc_register_dai() folded into snd_soc_register_codec(). CS4270 portions: Acked-by: Timur Tabi <timur@freescale.com> Some TLV320aic23 and Cirrus platform fixes. Signed-off-by: Ryan Mallon <ryan@bluewatersys.com> TI CODEC and OMAP fixes Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com> Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Samsung platform and misc fixes :- Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by: Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Seungwhan Youn <sw.youn@samsung.com> MPC8610 and PPC fixes. Signed-off-by: Timur Tabi <timur@freescale.com> i.MX fixes and some core fixes. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> J4740 platform fixes:- Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> CC: Tony Lindgren <tony@atomide.com> CC: Nicolas Ferre <nicolas.ferre@atmel.com> CC: Kevin Hilman <khilman@deeprootsystems.com> CC: Sascha Hauer <s.hauer@pengutronix.de> CC: Atsushi Nemoto <anemo@mba.ocn.ne.jp> CC: Kuninori Morimoto <morimoto.kuninori@renesas.com> CC: Daniel Gloeckner <dg@emlix.com> CC: Manuel Lauss <mano@roarinelk.homelinux.net> CC: Mike Frysinger <vapier.adi@gmail.com> CC: Arnaud Patard <apatard@mandriva.com> CC: Wan ZongShun <mcuos.com@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-05-21ASoC: ad193x: add set_sysclk entry to support different clock inputBarry Song
Signed-off-by: Barry Song <21cnbao@gmail.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
2010-03-19ASoC: Unexport AD193x bus probe/remove functionsMark Brown
The export is not needed since the per-bus code lives in the same module. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-03-19ASoC: rename ad1938 to ad193x and add support for ad1936/7/8/9Barry Song
Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Yi Li <yi.li@analog.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>