summaryrefslogtreecommitdiff
path: root/sound/soc/codecs/tas2770.c
AgeCommit message (Collapse)Author
2021-04-08ASoC: tas2770: Constify static struct snd_soc_dai_opsYe Bin
The snd_soc_dai_ops structures is only stored in the ops field of a snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure const to allow the compiler to put it in read-only memory. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20210408062646.803053-1-yebin10@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-03-18ASoC: tas2770: remove useless initializationPierre-Louis Bossart
cppcheck warning: sound/soc/codecs/tas2770.c:109:10: style: Variable 'ret' is assigned a value that is never used. [unreadVariable] int ret = 0; ^ Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20210312182246.5153-22-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2021-01-21ASoC: tas*: sync parameter naming (rate/sample_bits)Kuninori Morimoto
This patch syncs naming rule. - xxx_rates; + xxx_rate; - xxx_samplebits; + xxx_sample_bits; Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/877doeolgk.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-23ASoC: tas2770: Remove unused variablesDan Murphy
Remove unused variables in the private struct and the code as these variables are initially set and then there is no additional code utilizing these variables. Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200923132600.10652-6-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-23ASoC: tas2770: Remove ti,asi-format codeDan Murphy
Remove the code to support the asi-format binding property. The code does nothing except read the property and set a variable. No additional action is taken except to reset the variable. The property is supposed to set the rising or falling RX edge detection of the SBCLK but this edge detection is done by checking the DAI_FMT_INV_MASK. Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200923132600.10652-5-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-23ASoC: tas2770: Set regcache when shutting down and waking deviceDan Murphy
Set the regcache to cache data and mark cache as dirty when the device is shutdown when suspend is called. When the device is woken up then sync the cache and set to not caching the data. Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200923132600.10652-3-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-23ASoC: tas2770: Add shutdown capability via a GPIODan Murphy
Add the hardware shutdown mechanism to shutdown and wake up the device via a GPIO. Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200923132600.10652-2-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-21ASoC: tas2770: Refactor sample rate functionDan Murphy
Refactor the tas2770_set_samplerate to simplify the code and access the I2C bus only once per rate request. The ramp rate and sample rate bits are contained in the same register so a single call to the snd_soc_update_bits function is all that is needed Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200918190548.12598-9-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-21ASoC: tas2770: Fix the spacing and new linesDan Murphy
Fix up the spacing for argument alignment and add new lines to separate code. Eliminate unneccessary goto statements when the error code could just be returned. Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200918190548.12598-8-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-21ASoC: tas2770: Fix unbalanced calls to pm_runtimeDan Murphy
Fix the unbalanced call to the pm_runtime_disable when removing the module. pm_runtime_enable is not called nor is the pm_runtime setup in the code. Remove the i2c_remove function and the pm_runtime_disable. Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200918190548.12598-5-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-21ASoC: tas2770: Fix error handling with update_bitsDan Murphy
snd_soc_update_bits returns a 1 when the bit was successfully updated, returns a 0 is no update was needed and a negative if the call failed. The code is currently failing the case of a successful update by just checking for a non-zero number. Modify these checks and return the error code only if there is a negative. Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200918190548.12598-7-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-21ASoC: tas2770: Fix required DT properties in the codeDan Murphy
The devicetree binding indicates that the ti,asi-format, ti,imon-slot-no and ti,vmon-slot-no are not required but the driver requires them or it fails to probe. Honor the binding and allow these entries to be optional and set the corresponding values to the default values for each as defined in the data sheet. Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200918190548.12598-4-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-21ASoC: tas2770: Add missing bias level power statesDan Murphy
Add the BIAS_STANDBY and BIAS_PREPARE to the set_bias_level or else the driver will return -EINVAL which is not correct as they are valid states. Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200918190548.12598-2-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-09-21ASoC: tas2770: Fix calling reset in probeDan Murphy
tas2770_reset is called during i2c probe. The reset calls the snd_soc_component_write which depends on the tas2770->component being available. The component pointer is not set until codec_probe so move the reset to the codec_probe after the pointer is set. Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200918190548.12598-1-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-22ASoC: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Acked-by: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200719153822.59788-1-grandmaster@al2klimov.de Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-21ASoC: tas2770: Fix reset gpio property nameDan Murphy
Fix the reset property name when allocating the GPIO descriptor. The gpiod_get_optional appends either the -gpio or -gpios suffix to the name. Fixes: 1a476abc723e6 ("tas2770: add tas2770 smart PA kernel driver") Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200720181202.31000-2-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2020-07-16ASoC: codecs: tas*: merge .digital_mute() into .mute_stream()Kuninori Morimoto
snd_soc_dai_digital_mute() is internally using both mute_stream() (1) or digital_mute() (2), but the difference between these 2 are only handling direction. We can merge digital_mute() into mute_stream int snd_soc_dai_digital_mute(xxx, int direction) { ... else if (dai->driver->ops->mute_stream) (1) return dai->driver->ops->mute_stream(xxx, direction); else if (direction == SNDRV_PCM_STREAM_PLAYBACK && dai->driver->ops->digital_mute) (2) return dai->driver->ops->digital_mute(xxx); ... } Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/873661xxhu.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-15ASoC: tas2770: clean up an indentation issueColin Ian King
There is a block that is indented too deeply, remove the extraneous tabs. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20191112190218.282337-1-colin.king@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-07ASoC: tas2770: Fix snd_soc_update_bits error handlingDan Murphy
According the documentation for snd_soc_update_bits the API will return a 1 if the update was successful with a value change, a 0 if the update was successful with no value change or a negative if the command just failed. So the value of return in the driver needs to be checked for being less then 0 or the caller may indicate failure when the value actually changed. Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20191007171157.17813-1-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-07ASoC: tas2770: Remove unneeded read of the TDM_CFG3 registerDan Murphy
Remove the unneeded and incorrect read of the TDM_CFG3 register. The read is done but the value is never used. Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20191007171157.17813-2-dmurphy@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-07ASoc: tas2770: Fix build error without GPIOLIBYueHaibing
If GPIOLIB is not set, building fails: sound/soc/codecs/tas2770.c: In function tas2770_reset: sound/soc/codecs/tas2770.c:38:3: error: implicit declaration of function gpiod_set_value_cansleep; did you mean gpio_set_value_cansleep? [-Werror=implicit-function-declaration] gpiod_set_value_cansleep(tas2770->reset_gpio, 0); ^~~~~~~~~~~~~~~~~~~~~~~~ gpio_set_value_cansleep sound/soc/codecs/tas2770.c: In function tas2770_i2c_probe: sound/soc/codecs/tas2770.c:749:24: error: implicit declaration of function devm_gpiod_get_optional; did you mean devm_regulator_get_optional? [-Werror=implicit-function-declaration] tas2770->reset_gpio = devm_gpiod_get_optional(tas2770->dev, ^~~~~~~~~~~~~~~~~~~~~~~ devm_regulator_get_optional sound/soc/codecs/tas2770.c:751:13: error: GPIOD_OUT_HIGH undeclared (first use in this function); did you mean GPIOF_INIT_HIGH? GPIOD_OUT_HIGH); ^~~~~~~~~~~~~~ GPIOF_INIT_HIGH Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver") Suggested-by: Ladislav Michl <ladis@linux-mips.org> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20191006104631.60608-1-yuehaibing@huawei.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-03tas2770: fix platform_no_drv_owner.cocci warningskbuild test robot
sound/soc/codecs/tas2770.c:796:3-8: No need to set .owner here. The core will do it. Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Fixes: 1a476abc723e ("tas2770: add tas2770 smart PA kernel driver") CC: Frank Shi <shifu0704@thundersoft.com> Signed-off-by: kbuild test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20191001175504.ufhyxh66psrht42k@332d0cec05f4 Signed-off-by: Mark Brown <broonie@kernel.org>
2019-10-01tas2770: add tas2770 smart PA kernel driverFrank Shi
add tas2770 smart PA kernel driver Signed-off-by: Frank Shi <shifu0704@thundersoft.com> Link: https://lore.kernel.org/r/1568962709-19185-2-git-send-email-shifu0704@thundersoft.com Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2024-05-27 04:32:41 +0000