summaryrefslogtreecommitdiff
path: root/sound/soc/codecs
AgeCommit message (Collapse)Author
2022-11-28ASoC: rt1316-sdw: Switch to new snd_sdw_params_to_config helperCharles Keepax
The conversion from hw_params to SoundWire config is pretty standard as such most of the conversion can be handled by the new snd_sdw_params_to_config helper function. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20221123165432.594972-4-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-28ASoC: rt1308-sdw: Switch to new snd_sdw_params_to_config helperCharles Keepax
The conversion from hw_params to SoundWire config is pretty standard as such most of the conversion can be handled by the new snd_sdw_params_to_config helper function. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20221123165432.594972-3-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-28ASoC: max98373-sdw: Switch to new snd_sdw_params_to_config helperCharles Keepax
The conversion from hw_params to SoundWire config is pretty standard as such most of the conversion can be handled by the new snd_sdw_params_to_config helper function. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20221123165432.594972-2-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-25ASoC: adau1372: fixes after debugging custom boardMark Brown
Merge series from Maarten Zanders <maarten.zanders@mind.be>: A collection of fixes and improvements for the adau1372 driver.
2022-11-25ASoC: adau1372: add support for S24_LE modeMaarten Zanders
The ADAU1372 contains 24bit ADCs and DACs. Allow the driver to use its native mode which uses the same settings as the current 32 bit mode. Signed-off-by: Maarten Zanders <maarten.zanders@mind.be> Link: https://lore.kernel.org/r/20221028152626.109603-3-maarten.zanders@mind.be Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-25ASoC: adau1372: correct PGA enable & mute bitMaarten Zanders
The DAPM control for PGAx uses the PGA mute bit for power management. This bit is active high but is set to non-inverted (ie when powering, it will mute). The ALSA control "PGA x Capture Switch" uses the active high PGA_ENx bit, but is set to inverted. So when enabling this switch, the PGA gets disabled. To correct the behaviour, invert both these bits. Signed-off-by: Maarten Zanders <maarten.zanders@mind.be> Link: https://lore.kernel.org/r/20221028152626.109603-4-maarten.zanders@mind.be Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-25ASoC: adau1372: fix mclkMaarten Zanders
"mclk" is retrieved from the configuration and assigned to adau1372->clk. However adau1372->mclk (==NULL) is used for clk_prepare_enable() and clk_disable_unprepare() which don't have any effect. Remove .clk from struct adau1372 and use .mclk throughout. This change ensures that the input clock is switched on/off when the bias level is changed. Signed-off-by: Maarten Zanders <maarten.zanders@mind.be> Link: https://lore.kernel.org/r/20221028152626.109603-2-maarten.zanders@mind.be Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-25firmware: cs_dsp: Switch to using namespaced exportsMark Brown
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>: Use EXPORT_SYMBOL_NS_GPL() instead of EXPORT_SYMBOL_GPL() and patch the three drivers that use cs_dsp to add the MODULE_IMPORT_NS(). To make the namespace more specific the KConfig symbol for cs_dsp is changed from CS_DSP to FW_CS_DSP.
2022-11-25ASoC: wm_adsp: Report when a control write changes the valueMark Brown
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>: Writing a firmware control should be returning 1 if the control value changed, so these two patches add that. Though this is an ALSA requirement it is also useful for non-ALSA clients of cs_dsp to know if the control value changed, so the main handling is implemented in cs_dsp. TLV controls are specifically an ALSA thing so they are handled specially in wm_adsp. Simon Trimmer (2): firmware: cs_dsp: cs_dsp_coeff_write_ctrl() should report changed ASoC: wm_adsp: Return whether changed when writing controls drivers/firmware/cirrus/cs_dsp.c | 17 ++++++++++++----- sound/soc/codecs/wm_adsp.c | 27 ++++++++++++++++++--------- 2 files changed, 30 insertions(+), 14 deletions(-) -- 2.30.2
2022-11-25firmware: cs_dsp: Make the exports namespacedRichard Fitzgerald
Move all the exports into a namespace. This also adds the MODULE_IMPORT_NS to the 3 drivers that use the exported functions. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20221124134556.3343784-3-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-25firmware: cs_dsp: Rename KConfig symbol CS_DSP -> FW_CS_DSPRichard Fitzgerald
Qualify the KConfig symbol for cs_dsp by adding a FW_ prefix so that it is more explicit what is being referred to. This is preparation for using the symbol to namespace the exports. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20221124134556.3343784-2-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-24ASoC: codecs: src4xxx-i2c: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-604-uwe@kleine-koenig.org Reviewed-by: Matt Flax <flatmax@flatmax.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-24ASoC: max98396: Convert to i2c's .probe_new()Uwe Kleine-König
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-603-uwe@kleine-koenig.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-24ASoC: codecs: tas2780: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-605-uwe@kleine-koenig.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-24ASoC: codecs: es8326: Convert to i2c's .probe_new()Uwe Kleine-König
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20221118224540.619276-602-uwe@kleine-koenig.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-24ASoC: nau8315: add new acpi id and compatible idDavid Lin
Add new acpi id and compatible id for nau8315. Signed-off-by: David Lin <CTLIN0@nuvoton.com> Link: https://lore.kernel.org/r/20221124055658.53828-1-CTLIN0@nuvoton.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-23ASoC: wm_adsp: Return whether changed when writing controlsSimon Trimmer
Functions that update cs_dsp controls need to handle return codes that indicate whether the control value changed. A return code of 1 indicates a change, 0 indicates no-change and a negative value is an error condition. Acked controls implicitly change value when written so a successful write shall always report that the value changed. Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com> Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20221123165811.3014472-3-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-23ASoC: wm_adsp: Allow client to hook into pre_run callbackRichard Fitzgerald
Some HALO-based codecs need some additional custom setup in the pre_run stage of cs_dsp. Implement the callback in wm_adsp to call an optional codec driver callback. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20221109165331.29332-11-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-22ASoC: nau8825: Add a manually mechanism for detection failureDavid Lin
This patch is to use saradc to check the jack type when auto detection is still failure. Signed-off-by: David Lin <CTLIN0@nuvoton.com> Link: https://lore.kernel.org/r/20221122073855.43024-2-CTLIN0@nuvoton.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-22ASoC: nau8825: Adjust internal clock during jack detectionDavid Lin
This patch is to rasie up internal clock during jack detection. The fast clock will accelerate charge and discharge effect. So this mechanism will make jack detection more robust. Signed-off-by: David Lin <CTLIN0@nuvoton.com> Link: https://lore.kernel.org/r/20221122073855.43024-1-CTLIN0@nuvoton.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-16ASoC: codecs: wsa883x: Simplify with dev_err_probeKrzysztof Kozlowski
Code can be a bit simpler with dev_err_probe(). Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221109163759.1158837-2-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-16ASoC: codecs: wsa883x: Shutdown on error pathKrzysztof Kozlowski
If probe fails, toggle shutdown via GPIO to save power and reverse probe actions. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221109163759.1158837-1-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-16ASoC: rt1318: Add RT1318 SDCA vendor-specific driverShuming Fan
This is the initial amplifier driver for rt1318 SDCA version. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20221108092727.13011-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-15ASoC: codecs: tx-macro: add dmic support via tx macroSrinivas Kandagatla
DMIC Paths into LPASS digital codec can go via tx-macro or va-macro codec, add support to tx-macro path as va-macro path is already supported. Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221115065430.4126-1-srinivas.kandagatla@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-14ASoC: codecs: Remove a useless includeChristophe JAILLET
<linux/gcd.h> is not needed for these drivers. Remove the corresponding #include. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/875ca433849025edf8c23624cf29b0e2250bba50.1668287523.git.christophe.jaillet@wanadoo.fr Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-11ASoC: codecs: wsa883x: use correct header fileRandy Dunlap
Fix build errors when GPIOLIB is not set/enabled: ../sound/soc/codecs/wsa883x.c: In function 'wsa883x_probe': ../sound/soc/codecs/wsa883x.c:1394:25: error: implicit declaration of function 'devm_gpiod_get_optional'; did you mean 'devm_regulator_get_optional'? [-Werror=implicit-function-declaration] wsa883x->sd_n = devm_gpiod_get_optional(&pdev->dev, "powerdown", ../sound/soc/codecs/wsa883x.c:1395:49: error: 'GPIOD_FLAGS_BIT_NONEXCLUSIVE' undeclared (first use in this function) GPIOD_FLAGS_BIT_NONEXCLUSIVE); ../sound/soc/codecs/wsa883x.c:1414:9: error: implicit declaration of function 'gpiod_direction_output'; did you mean 'gpio_direction_output'? [-Werror=implicit-function-declaration] gpiod_direction_output(wsa883x->sd_n, 1); Fixes: 43b8c7dc85a1 ("ASoC: codecs: add wsa883x amplifier support") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Banajit Goswami <bgoswami@quicinc.com> Cc: Mark Brown <broonie@kernel.org> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: alsa-devel@alsa-project.org Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221108001829.5100-1-rdunlap@infradead.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-11ASoC: codecs: wsa883x: Use proper shutdown GPIO polarityKrzysztof Kozlowski
The shutdown GPIO is active low (SD_N), but this depends on actual board layout. Linux drivers should only care about logical state, where high (1) means shutdown and low (0) means do not shutdown. Invert the GPIO to match logical value. Fixes: 43b8c7dc85a1 ("ASoC: codecs: add wsa883x amplifier support") Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20221110133512.478831-2-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-11ASoC: Set BQ parameters for some Dell modelsMark Brown
There are some Dell SKUs that need to set the parameters of the crossover filter (biquad). Each amplifier connects to one tweeter speaker and one woofer speaker. We should control HPF/LPF to output the proper frequency for the different speakers. If the codec driver got the BQ parameters from the device property, it will apply these parameters to the hardware.
2022-11-10ASoC: codecs: lpass-wsa-macro: parse clock-output-namesKrzysztof Kozlowski
If we have several instances of WSA macro, each one of them should register clock with unique name, so parse clock-output-names for this. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20221103195341.174972-2-krzysztof.kozlowski@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-10ASoC: rt1316-sdw: get BQ params property and apply themShuming Fan
If the machine driver level sets the BQ params into the device property, the codec driver will get the BQ params and apply them. Signed-off-by: Shuming Fan <shumingf@realtek.com> Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20221109091244.17198-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-10ASoC: rt1308-sdw: get BQ params property and apply themShuming Fan
If the machine driver level sets the BQ params into the device property, the codec driver will get the BQ params and apply them. Signed-off-by: Shuming Fan <shumingf@realtek.com> Reviewed-by: Pierre-Louis Bossart pierre-louis.bossart@linux.intel.com Link: https://lore.kernel.org/r/20221109091234.17180-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-10ASoC: codecs: da7219: Do not export da7219_aad_jack_det()Mark Brown
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>: Goal of the series is to drop any usage of the internal function. First, update all users to utilize component->set_jack() and then remove the relevant EXPORT_SYMBOL_GPL.
2022-11-07ASoC: rt5682: Support DBVDD and LDO1-IN suppliesNícolas F. R. A. Prado
Add support for the DBVDD and LDO1-IN supplies. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20221102182002.255282-7-nfraprado@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-07ASoC: rt5682s: Support DBVDD and LDO1-IN suppliesNícolas F. R. A. Prado
Add support for the DBVDD and LDO1-IN supplies. Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com> Link: https://lore.kernel.org/r/20221102182002.255282-6-nfraprado@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-07ASoC: codecs: da7219: Do not export internal symbolsAmadeusz Sławiński
With all users utilizing component->set_jack(), there is no need to export da7219_aad_jack_det() function. While at it, remove exports from all other functions as well. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20221031160227.2352630-8-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-07ASoC: codecs: da7219: Introduce set_jack() callbackAmadeusz Sławiński
Codec driver for da7219 implements jack detect functionality, but does not integrate it with the framework. Platform component drivers are accessing the functionality through internal da7219_aad_jack_det() instead. Address this by implementing set_jack() for the codec. Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20221031160227.2352630-2-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-03ASoC: simple-mux: add read functionMaarten Zanders
During initialisation DAPM tries to read the state of the MUX being connected, resulting in this error log: input-mux: ASoC: error at soc_component_read_no_lock on input-mux: -5 Provide a read function which allows DAPM to read the state of the MUX. Signed-off-by: Maarten Zanders <maarten.zanders@mind.be> Link: https://lore.kernel.org/r/20221028191303.166115-1-maarten.zanders@mind.be Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-03ASoC: tlv320aic3x: switch to using gpiod APIDmitry Torokhov
Switch the driver from legacy gpio API that is deprecated to the newer gpiod API that respects line polarities described in ACPI/DT. The driver still tries to support shared reset lines, by first trying to allocate the reset GPIO normally, and then non-exclusively, although the utility of such support is questionable, toggling reset line from one driver/instance will result in all chips being reset, potentially at an inopportune moment. Note that this change depends on commit fbbbcd177a27 ("gpiolib: of: add quirk for locating reset lines with legacy bindings") to translate request for "reset" GPIO to the legacy name "gpio-reset" in case when proper name is not used. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20221102232004.1721864-3-dmitry.torokhov@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-03ASoC: tlv320aic3x: remove support for platform dataDmitry Torokhov
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Link: https://lore.kernel.org/r/20221102232004.1721864-2-dmitry.torokhov@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-11-01ASoC: cs42xx8-i2c.c: add module device table for ofPeter Bergin
When trying to connect the device with the driver through device-tree it is not working. The of_device_id is defined in cs42xx8.c but is not correctly included in cs42xx8-i2c.c. Move of_device_id table to cs42xx8-i2c.c. Get cs42xx8_driver_data in cs42xx8_i2c_probe() and pass as argument to cs42xx8_probe(). Move error check if no driver data found to cs42xx8_i2c_probe(). Signed-off-by: Peter Bergin <peter@berginkonsult.se> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20221031203723.168177-1-peter@berginkonsult.se Signed-off-by: Mark Brown <broonie@kernel.org>
2022-10-21ASoC: SOF: Intel/IPC4: Support for external firmware librariesMark Brown
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: In IPC4 all DSP loadable executable is a 'library' containing modules. The main or basefw is also a library which contains multiple modules. IPC4 allows to use loadable libraries to extend the functionality of the booted basefw. This series adds support for loading external libraries in case they are needed by the loaded topology file. The libraries must be placed to a specific firmware directory (fw_lib_prefix), which is: intel/avs-lib|sof-ipc4-lib/ followed by the platform name and in case of community key use a 'community' directory. For example for upx-i11 (community key): intel/avs-lib/tgl/community is the default path. The name of the library should be the UUID of the module it contains since the library loading is going to look for the file as <module_UUID>.bin In case there is a need to bundle multiple modules into single library, symlinks can be used to point to the file: module_boundle.bin <UUID1>.bin -> module_boundle.bin <UUID2>.bin -> module_boundle.bin <UUID3>.bin -> module_boundle.bin But note that in this case all modules will be loaded to the DSP since only the whole library can be loaded, not individual modules.
2022-10-21ASoC: Merge HDA/ext cleanupMark Brown
Merge branch 'topic/hda-ext-cleanup' of https://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound into asoc-6.2 for further AVS work.
2022-10-20ALSA/ASoC: hda: clarify bus_get_link() and bus_link_get() helpersPierre-Louis Bossart
We have two helpers with confusing names and different purposes. Rename bus_get_link() and bus_get_link_at() as bus_get_hlink_by_name() and bus_get_hlink_by_addr() respectively. No functionality change Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Rander Wang <rander.wang@intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20221019162115.185917-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2022-10-19ASoC: jz4752b: Capture fixesMark Brown
Merge series from Siarhei Volkau <lis8215@gmail.com>: The patchset fixes: - Line In path stays powered off during capturing or bypass to mixer. - incorrectly represented dB values in alsamixer, et al. - incorrect represented Capture input selector in alsamixer in Playback tab. - wrong control selected as Capture Master
2022-10-19ASoC: codecs: jz4725b: Fix spelling mistake "Sourc" -> "Source", "Routee" -> ↵Colin Ian King
"Route" There are two spelling mistakes in codec routing description. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20221019071639.1003730-1-colin.i.king@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-10-19ASoC: rt1308-sdw: add the default value of some registersShuming Fan
The driver missed the default value of register 0xc070/0xc360. This patch adds that default value to avoid invalid register access when the device doesn't be enumerated yet. BugLink: https://github.com/thesofproject/linux/issues/3924 Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20221019095715.31082-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-10-19ASoC: rt1308-sdw: update the preset settingsShuming Fan
This patch updates the pad control and checks the hardware version to set the different preset settings. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20221019095731.31101-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-10-19ASoC: soc-dapm.c random cleanupsMark Brown
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: These are random cleanup for soc-dpam.c/h. Basically, these are just cleanup, nothing changed.
2022-10-18ASoC: twl4030: make read-only array ramp_base static constColin Ian King
Don't populate the read-only array ramp_base on the stack but instead make it static const. Also makes the object code a little smaller. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20221018152928.942186-1-colin.i.king@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2022-10-18ASoC: soc-dapm.c: ignore parameter NULL at snd_soc_dapm_free_widget()Kuninori Morimoto
Currently snd_soc_dapm_free_widget() is assuming input parameter is non NULL. Thus, caller need to care about it. This patch care it at snd_soc_dapm_free_widget(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87wn8yowdr.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-05-30 09:07:33 +0000