summaryrefslogtreecommitdiff
path: root/sound/soc/intel
AgeCommit message (Collapse)Author
2018-02-07Merge remote-tracking branches 'asoc/topic/ak4613', 'asoc/topic/core', ↵Mark Brown
'asoc/topic/dmic' and 'asoc/topic/intel' into asoc-next
2018-01-26ASoC: Intel: kbl: Enable mclk and ssp sclk earlyHarsha Priya
rt5663 needs mclk/sclk early to synchronize its internal clocks. Enable these clocks early. Signed-off-by: Harsha Priya <harshapriya.n@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-26ASoC: Intel: Skylake: Add extended I2S config blob support in Clock driverSriram Periyasamy
Extended I2S config blob supports multiple mclk dividers in NHLT blob. This patch detects whether the I2S blob is legacy or extended based on the signature value and chooses the mclk source and divider accordingly. Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-26ASoC: Intel: Skylake: Add ssp clock driverSriram Periyasamy
For certain platforms, it is required to start the clocks (mclk/sclk/fs) before the stream start. Example: for few chrome systems, codec needs the mclk/sclk to be enabled early for a successful clock synchronization and for few IVI platforms, clock need to be enabled at boot and should be ON always. Add the required structures and create set_dma_control ipc to enable or disable the clock. To enable sclk without fs, mclk ipc structure is used, else sclkfs ipc structure is used. Clock prepare/unprepare are used to enable/disable the clock as the IPC will be sent in non-atomic context. The clk set_dma_control IPC structures are populated during the set_rate callback and IPC is sent to enable the clock during prepare callback. This patch creates virtual clock driver, which allows the machine driver to use the clock interface to send IPCs to DSP to enable/disable the clocks. Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Signed-off-by: Jaikrishna Nemallapudi <jaikrishnax.nemallapudi@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-18ASoC: Intel: remove select on non-existing SND_SOC_INTEL_COMMONCorentin LABBE
SND_SST_ATOM_HIFI2_PLATFORM_PCI select SND_SOC_INTEL_COMMON which do not exists anymore. So remove this select. Fixes: c6059879be29 ("ASoC: Intel: Fix Kconfig with top-level selector") Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-17ASoC: Intel: remove second duplicated assignment to pointer 'res'Colin Ian King
The second assignment to res is identical to the previous assignment so it is redundant and can be removed. Cleans up clang warning: sound/soc/intel/skylake/skl-topology.c:191:25: warning: Value stored to 'res' during its initialization is never read Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-12ASoC: Intel - Convert to use acpi_dev_get_first_match_name()Andy Shevchenko
Instead of home grown snd_soc_acpi_find_name_from_hid() use acpi_dev_get_first_match_name(). Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-12ASoC: acpi: remove hard-coded i2c-device name lengthPierre-Louis Bossart
Remove hard-codec [16] array size, replace with clearer description and dependency on ACPI_ID_LEN No functionality change Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-12ASoC: Intel: bytcht_es8316: fix HID handlingPierre-Louis Bossart
Same problem as with previous machine drivers, the codec dai uses a hard-coded name of "i2c-ESSX8316:00" but ACPI provides "i2c-ESSX8316:01" in some systems. Fix by overriding the hard-coded value with the codec name derived from the HID information Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=189261 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-12Merge branch 'acpi-gpio' of ↵Mark Brown
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm into asoc-intel
2018-01-12Merge remote-tracking branches 'asoc/topic/rt5514', 'asoc/topic/rt5645', ↵Mark Brown
'asoc/topic/samsung' and 'asoc/topic/si476x' into asoc-next
2018-01-12Merge remote-tracking branch 'asoc/topic/intel' into asoc-nextMark Brown
2018-01-12Merge remote-tracking branch 'asoc/fix/intel' into asoc-linusMark Brown
2018-01-10ASoC: Intel: remove mfld_machineVinod Koul
mfld_machine was not getting compiled due to missed Makefile changes. Since no one complained it is safe to assume that it is not being used, so remove it Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: kconfig: drop boiler plate text from config itemsVinod Koul
Drop "Intel ASoC SST driver for " platforms and "SOC Machine Audio driver for Intel" for machines.. Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: kconfig: add some comments for if symbolsVinod Koul
Help in finding matching "if" endings by commenting the "endif". Signed-off-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: boards: align/fix SKL/BXT/KBL KconfigsPierre-Louis Bossart
No reason why SND_SOC_INTEL_SST should be set here. Also make sure same dependencies are used everywhere (only last one has SPI in addition). Replace X86_INTEL_LPSS by MFD_INTEL_LPSS since the former makes no sense for Skylake+ devices Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: boards: align Kconfig configurations for HiFi2Pierre-Louis Bossart
Make sure all the configs are aligned Also add the missing dependencies on SOC_ACPI stuff used to fix DAI names based on HID and fix a couple of indentation issues Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: boards: align Kconfig dependencies for Haswell/BroadwellPierre-Louis Bossart
Make sure that the same I2C/I2C_DESIGNWARE_PLATFORM are selected. The latter might actually need to be moved to the SOC side of things, it really has no place in a machine driver dependency Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: Fix nested/unnecessary Kconfig dependenciesPierre-Louis Bossart
This patch fixes a number of issues: 1. IOSF_MBI is only needed for byt-cr detection, which is only supported on Baytrail/Cherrytrail, move to HiFi2 config 2. SND_SOC_INTEL_SST should not select SND_SOC_INTEL_SST_ACPI, the latter config is only valid for Haswell/Baytrail legacy but not needed by Skylake 3. SND_SST_IPC_ACPI, used only by the atom/sst driver, should not select SND_SOC_INTEL_SST, none of the code under common/sst*.c is used This nesting of configs really makes no sense, it's easier to maintain if for each platform one can control what is strictly required. Compiled-tested with each of Haswell, Baytrail legacy, HiFi2, SKL cases selected independently. 0-day and explicit randconfig tests did not report additional issues and no functionality loss was observed in Intel tests on HIFI2 and SKYLAKE platforms Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: document what Kconfig options doPierre-Louis Bossart
Document in comments what the options are supposed to mean, before clean-up in next patch. No functionality change here. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: Kconfig: Simplify-clarify ACPI/PCI dependenciesPierre-Louis Bossart
PCI/ACPI selections should not happen in Kconfig for machine drivers, move to SOC selections. Add distinction between PCI and ACPI HiFi2 platforms and help text. There should be no functionality change. The PCI-based platforms may be removed at some point since Medfield is not really supported by anyone, and with Edison now defunct support for Merrifield/Edison is to be determined. The dependency on SND_DMA_SGBUF for Haswell is not clear at this point and may have to be further updated. Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: Fix Kconfig with top-level selectorPierre-Louis Bossart
Follow network example suggested by Linus, move Intel definitions in if/endif block and clarify in help text which options distro configurations should enable - everything except legacy Baytrail stuff and NOCODEC (test only) To avoid user confusion, machine drivers are handled with a submenu made dependent on this top-level selector. There should be no functionality change - except that sound capabilities are restored when using older configs without any user selection. Note that the SND_SOC_ACPI_INTEL_MATCH config is currently filtered out by the top-level selector. This will change in the near future to allow for this option to be selected by both SST and SOF drivers (simplification with submenu for machine drivers by Vinod Koul) Fixes: f6a118a800e3 ("ASoC: Intel: clarify Kconfig dependencies") Reported-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: bytcr-rt5651: add support for Line InPierre-Louis Bossart
Add the DAPM widgets and routes. Tested with MinnowMax Turbot + rt5651 eval board with Speaker (LineOut) -> LineIn loopback Thanks to Bard Liao @ Realtek for providing the 0dB settings "IN Capture Volume" = 23 "ADC Capture Volume" = 47 "OUT Playback Volume" = 31 "DAC1 Playback Volume" = 175 Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: bytcr-rt5651: enable MinnowBoard Turbot quirksPierre-Louis Bossart
Define DMI quirk for rt5651 eval board connected to MinnowBoard Turbot. The only difference with a MinnowBoard MAX is that the MCLK pin is enabled on the LSE connector Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Tested-by: Keqiao.Zhang <Keqiao.zhang@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: bytcr-rt5651: add quirk for IN3P which may also be usedKeyon Jie
On Minnowboard Max with Realtek rt5651 eval board, the IN3P is connected to Headset Mic. Here add and select it for Minnowboard Max. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: bytcr_rt5651: fix Kiano DMI quirkPierre-Louis Bossart
The current code doesn't enable the MCLK which reduces audio quality (PLL driven from BLCK), fix the quirk Tested-by: Carlo Caione <carlo@caione.org> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: sst: Fix some styleChristophe JAILLET
This patch fixes 3 small issues: - missing 2nd '*' at the beginning of a doxygen comment - extra space after a '\n' in a dev_dbg message - extra tab before a 'return" statement Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08ASoC: Intel: sst: Fix the return value of 'sst_send_byte_stream_mrfld()'Christophe JAILLET
In some error handling paths, an error code is assiegned to 'ret'. However, the function always return 0. Fix it and return the error code if such an error paths is taken. Fixes: 3d9ff34622ba ("ASoC: Intel: sst: add stream operations") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-08Merge branch 'fix/intel' of ↵Mark Brown
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel
2018-01-03ASoC: skl: Fix kernel warning due to zero NHTL entryTakashi Iwai
I got the following kernel warning when loading snd-soc-skl module on Dell Latitude 7270 laptop: memremap attempted on mixed range 0x0000000000000000 size: 0x0 WARNING: CPU: 0 PID: 484 at kernel/memremap.c:98 memremap+0x8a/0x180 Call Trace: skl_nhlt_init+0x82/0xf0 [snd_soc_skl] skl_probe+0x2ee/0x7c0 [snd_soc_skl] .... It seems that the machine doesn't support the SKL DSP gives the empty NHLT entry, and it triggers the warning. For avoiding it, let do the zero check before calling memremap(). Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03ASoC: Intel: Skylake: Disable clock gating during firmware and library downloadPardha Saradhi K
During firmware and library download, sometimes it is observed that firmware and library download is timed-out resulting into probe failure. This patch disables dynamic clock gating while firmware and library download. Signed-off-by: Pardha Saradhi K <pardha.saradhi.kesapragada@intel.com> Signed-off-by: Sanyog Kale <sanyog.r.kale@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-01-03ASoC: Intel: cht_bsw_rt5645: Analog Mic supportHans de Goede
Various Cherry Trail boards with a rt5645 codec have an analog mic connected to IN2P + IN2N. The mic on this boards also needs micbias to be enabled, on some boards micbias1 is used and on others micbias2, so we enable both. This commit adds a new "Int Analog Mic" DAPM widget for this, so that we do not end up enabling micbias on boards with a digital mic which uses the already present "Int Mic" widget. Some existing UCM files already refer to "Int Mic" for their "Internal Analog Microphones" SectionDevice, but these don't work anyways since they enable the RECMIX BST1 Switch instead of the BST2 switch. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-20ASoC: Intel: Skylake: Ensure dai and dailink registration happens in sequence.Pankaj Bharadiya
Platform registration happens in probe work handler whereas machine device is registered during skl_probe. This sometimes results in cpu dais not found if the work handler is sufficiently delayed due to system load, even with deferred probe of machine driver. So move machine device registration after registering platform. Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-20ASoC: Intel: Skylake: Request IRQ late only after all context are initializedSubhransu S. Prusty
Sometimes during boot, panic is observed at sst_dsp_shim_read_unlocked(). This happens when interrupt occurs before the context is initialized. So move the irq initialization only after the context is initialized completely. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Pawse, GuruprasadX <guruprasadx.pawse@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-11ASoC: Intel: Skylake: Re-order some code to silence a warningDan Carpenter
I get a Smatch warning here: sound/soc/intel/skylake/skl-nhlt.c:335 skl_get_ssp_clks() error: testing array offset 'j' after use. The code is harmless, but the checker is right that we should swap these two conditions so we verify that the offset is within bounds before we use it. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-08ASoC: Intel: Change kern log level to avoid unwanted messagesNaveen Manohar
patch suppresses the warning message "control load not supported" as this is a debug information to help debug issues in topology. Signed-off-by: Naveen Manohar <naveen.m@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-06ASoC: Intel: Skylake: Do not check dev_type for dmic link typeGuneshwor Singh
Some BIOS have inconsistent dev_type value for DMIC link type. Since there is only one device type for DMIC link type, remove device type check if link type is NHLT_LINK_DMIC. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-06ASoC: Intel: Skylake: Configure DSP clock sourcePradeep Tewani
DSP clock source is configured by sending the A-State table to the FW. Add the large config set IPC to configure the desired clock source Signed-off-by: Pradeep Tewani <pradeep.d.tewani@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-06ASoC: Intel: Skylake: Parse vendor tokens to build A-State tablePradeep Tewani
A-State table is a power management table which allows the driver to configure the DSP clock source corresponding to various load thresholds. The table contains upto 3 A-State entries. The patch adds and parses the corresponding A-State tokens to build the table. Signed-off-by: Pradeep Tewani <pradeep.d.tewani@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-06ASoC: Intel: Skylake: Remove second shim read in register_pollSubhransu S. Prusty
No need to read the register again if the value read has already matched the target during the loop. So remove the second shim read. Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-05ASoC: don't use rtd->codec on Intel/haswellKuninori Morimoto
rtd->codec will be removed soon. rtd->codec = rtd->codec_dai->codec, thus, we can use rtd->codec_dai->component instead of it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-05ASoC: don't use rtd->codec on intel/skylakeKuninori Morimoto
rtd->codec will be removed soon. rtd->codec = rtd->codec_dai->codec, thus, we can use rtd->codec_dai->component instead of it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-04ASoC: Intel: Skylake: Fix descriptions for exported function argsGuneshwor Singh
Fix a few incorrect descriptions for arguments in exported functions. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-04ASoC: Intel: Skylake: Make local functions staticGuneshwor Singh
Some functions are local to the source and do not need to be in global scope, so make them static. Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com> Acked-By: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01ASoC: intel: mfld: Handle return value of platform_get_irqArvind Yadav
platform_get_irq() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-12-01ASoC: intel: sst: Handle return value of platform_get_irqArvind Yadav
platform_get_irq() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-29ASoC: intel: byt: Fix quirk for KIANO laptopCarlo Caione
This laptop has actually two different analog mics, no just one. Fix the quirk to reflect the correct configuration. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-29ASoC: intel: byt: Introduce new map for dual micsCarlo Caione
The RT5651 codec has 3 analog inputs. Some laptops have two different internal analog microphones on the external case. Add a new custom quirk mapping the two internal mics on IN1P / IN2P, leaving the headset mic on IN3P. Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-11-29ASoC: Intel: Skylake: Parse nhlt and register clock deviceSriram Periyasamy
When NHLT endpoint is present for a SSP then we create clock for that SSP. MCLK is consistent across endpoints and configuration for an SSP, so query only for first endpoint for an SSP. For SCLK/SCLKFS, the best fit is queried from the NHLT configurations which matches the clock rate requested. Best fit is decided based on below: 1. If rate matches with multiple configurations, then the first configuration is selected. 2. If for a selected fs and bits_per_sample, there are multiple endpoint configuration match, then the configuration with max number of channels is selected. So, the user has to set the rate which fits max number of channels So we create a platform device and pass clock information parsed as platform data. Signed-off-by: Sriram Periyasamy <sriramx.periyasamy@intel.com> Signed-off-by: Jaikrishna Nemallapudi <jaikrishnax.nemallapudi@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2024-06-07 13:48:43 +0000