summaryrefslogtreecommitdiff
path: root/sound/soc/sh/rcar/adg.c
AgeCommit message (Collapse)Author
2014-12-03ASoC: rsnd: show master clock rate when ADG probeKuninori Morimoto
master clock rate is useful information for debug. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2014-05-13ASoC: rsnd: add DVC supportKuninori Morimoto
This patch adds DVC (Digital Volume Controller) support which is member of CMD unit. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-05-08ASoC: rsnd: remove old clock style supportKuninori Morimoto
All platform which used old style was switched to new style. R-Car sound can remove old style clock support, use device dependent clock now. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-21ASoC: rsnd: add DeviceTree supportKuninori Morimoto
Support for loading the Renesas R-Car sound driver via DeviceTree. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-05ASoC: rsnd: remove all rsnd_xxx_remove()Kuninori Morimoto
Now, rsnd_xxx_remove() do nothing. remove these Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04ASoC: rsnd: modify rsnd_adg_ssi_ws_timing_gen2() parameterKuninori Morimoto
rsnd_adg_ssi_ws_timing_gen2() returns SSI WS timing, and it used "mod" as parameter. but, this "mod" is sometimes not ssi mod. Get SSI mod from rsnd_dai_stream Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-04ASoC: rsnd: use devm_clk_get() instead of clk_get()Kuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-03-03ASoC: rsnd: remove verbose function parameterKuninori Morimoto
priv has rcar_snd_info pointer. having priv and info in same time is verbose. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-12ASoC: rsnd: set DIV_EN register on rsnd_adg_set_convert_clk_gen2()Kuninori Morimoto
DIV_EN register enable bit is required when you use Gen2 SRC Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-12ASoC: rsnd: tidyup original for_each_rsnd_xxx macroKuninori Morimoto
Current for_each_rsnd_xxx macro will read out-of-array's memory after last loop operation. It was not good C language operation, and the binary which was compiled by (at least) gcc 4.8.1 is broken This patch tidyup these issues Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-07ASoC: rsnd: use device dependency clockKuninori Morimoto
Current R-Car sound driver is using device independent audio clock, but it is not good design for DT support. This patch adds device dependent clock support. But, there are some platform which is using independent audio clock. It is still supported at this point, but it will be removed soon. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: add Gen2 SRC and DMAEngine supportKuninori Morimoto
Renesas sound Gen2 has SRC (= Sampling Rate Converter) which needs 2 DMAC. The data path image when you use SRC on Gen2 is [mem] -> Audio-DMAC -> SRC -> Audio-DMAC-peri-peri -> SSIU -> SSI This patch support SRC and DMAEnine. It is tested on R-Car H2 Lager board Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2014-02-03ASoC: rsnd: merge SRC clock timing/settingKuninori Morimoto
SRC clock and timing setting register exist in SRU and ADG on Gen1. But, these are merged into ADG on Gen2. Current driver is supporting Gen1 SRC only at this point, but, above settings are set as different function. This patch merges these as preparation of Gen2 support. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31ASoC: rsnd: add SRC (Sampling Rate Converter) supportKuninori Morimoto
This patch adds SRC support to Renesas sound driver. SRC converts sampling rate between codec <-> cpu. It needs special codec chip, or very simple DA/AD converter to use it. This patch was tested via ak4554 codec, and supports Gen1 only at this point. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31ASoC: rsnd: make sure variable name for 44.1kHz/48kHzKuninori Morimoto
This driver is assuming that RBGA is used as source clock of 44.1kHz category, and RBGB is used as source clock of 48kHz category. This patch clarifies the variable name. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-12-31ASoC: rsnd: add rsnd_adg_set_ssi_clk() and cleanup adgKuninori Morimoto
This patch adds rsnd_adg_set_ssi_clk() to access to AUDIO_CLK_SEL0/1/2, and removes last user of rsnd_write/read/bset which is very low level function. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-24ASoC: rsnd: remove rsnd_priv_read/write/bset()Kuninori Morimoto
adg.c only used rsnd_priv_read/write/bset() which is the only user of NULL mod. but, it can be removed. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-09-24ASoC: rcar: remove unnecessary mach/clock.hKuninori Morimoto
${LINUX}/sound/soc/sh driver can be compiled from SuperH and ARM. but, ${LINUX}/sound/soc/sh/rcar driver included SH-ARM specific header. This patch removes it Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-07-28ASoC: add Renesas R-Car ADG featureKuninori Morimoto
Renesas R-Car series sound circuit consists of SSI and its peripheral. But this peripheral circuit is different between R-Car Generation1 (E1/M1/H1) and Generation2 (E2/M2/H2) (Actually, there are many difference in Generation1 chips) This patch adds ADG feature which controls sound clock Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@linaro.org>
generated by cgit (git 2.34.1) at 2025-04-08 10:13:03 +0000