summaryrefslogtreecommitdiff
path: root/sound/soc/sh
AgeCommit message (Collapse)Author
2018-10-17ASoC: rsnd: tidyup SSICR::SWSP for TDMKuninori Morimoto
R-Car datasheet is indicating that WS output settings of SSICR::SWSP is inverted on TDM mode from non TDM mode settings. But, it is meaning that TDM should use 0 here. Without this patch, sound input/output 1ch will be 2ch, 2ch will be 3ch ..., be jumbled on I2S + TDM settings. This patch fixup it. This patch is tested on R-Car H3 ulcb-kf board, SSI3/4 TDM sound. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-17ASoC: rsnd: enable TDM settings for SSI parentKuninori Morimoto
Some SSIs are sharing each pins (= WS/CLK pin for playback/capture). Then, SSI parent needs control WS/CLK setting for SSI slave. In such case, SSI parent needs TDM settings if SSI slave is working as TDM mode. But it is not cared in current driver. It can't capture TDM sound without this patch if SSIs were pin sharing. This patch is tested on R-Car H3 ulcb-kf board, SSI3/4 with TDM sound. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-10-10ASoC: rsnd: use 32bit TDM width as defaultKuninori Morimoto
commit fb2815f44a9e ("ASoC: rsnd: add support for 16/24 bit slot widths") added TDM width check, and return error if it was not 16/24/32 bit. But it is too strict. This patch uses 32bit same as default. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-21ASoC: rsnd: fixup SSI clock during suspend/resume modesDmytro Prokopchuk
Prepare <-> Cleanup functions pair has balanced calls. But in case of suspend mode no call to rsnd_soc_dai_shutdown() function, so cleanup isn't called. OTOH during resume mode function rsnd_soc_dai_prepare() is called, but calling rsnd_ssi_prepare() is skipped (rsnd_status_update() returns zero, bacause was not cleanup before). We need to call rsnd_ssi_prepare(), because it enables SSI clocks by calling rsnd_ssi_master_clk_start(). This patch allows to call prepare/cleanup functions always. Signed-off-by: Dmytro Prokopchuk <dmytro.prokopchuk@globallogic.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> [kuninori: adjusted to upstream] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-20ASoC: add for_each_dpcm_be() macroKuninori Morimoto
To be more readable code, this patch adds new for_each_dpcm_be() macro, and replace existing code to it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-10Merge branch 'asoc-4.19' into asoc-4.20 Cirrus conflictMark Brown
2018-09-10ASoC: sh: use devm_snd_soc_register_component()Kuninori Morimoto
Now we have devm_snd_soc_register_component(). Let's use it instead of snd_soc_register_component(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-06ASoC: rsnd: don't use %p for dev_dbg()Kuninori Morimoto
rsnd driver sometimes want to know which address is used when debugging. But it will indicate "(____ptrval____)" if it used "%p" on dev_dbg(). Let's use "%pa" or "%px" for it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-06ASoC: rsnd: don't fallback to PIO mode when -EPROBE_DEFERKuninori Morimoto
Current rsnd driver will fallback to PIO mode if it can't get DMA handler. But, DMA might return -EPROBE_DEFER when probe timing. This driver always fallback to PIO mode especially from commit ac6bbf0cdf4206c ("iommu: Remove IOMMU_OF_DECLARE") because of this reason. The DMA driver will be probed later, but sound driver might be probed as PIO mode in such case. This patch fixup this issue. Then, -EPROBE_DEFER is not error. Thus, let's don't indicate error message in such case. And it needs to call rsnd_adg_remove() individually if probe failed, because it registers clk which should be unregister. Maybe PIO fallback feature itself is not needed, but let's keep it so far. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-06ASoC: rsnd: adg: care clock-frequency sizeKuninori Morimoto
ADG has buffer over flow bug if DT has more than 3 clock-frequency. This patch fixup this issue, and uses first 2 values. clock-frequency = <x y>; /* this is OK */ clock-frequency = <x y z>; /* this is NG */ Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-06ASoC: rsnd: gen: use tab instead of white-spaceKuninori Morimoto
commit 8c9d75033340 ("ASoC: rsnd: ssiu: Support BUSIF other than BUSIF0") added new SSIU registers. But it is using white-space for it. This patch fixup it to use tab. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-03ASoC: rsnd: merge .nolock_start and .prepareKuninori Morimoto
Main purpose of .nolock_start is we need to call some function without spinlock. OTOH we have .prepare which main purpose is called under atomic context. Then, it is called without spinlock. In summary, our main callback init/quit, and start/stop are called under "atomic context and with spinlock". And some function need to be called under "non-atomic context or without spinlock". Let's merge .nolock_start and prepare to be more clear code. Then, let's rename nolock_stop to cleanup Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-03Merge branch 'asoc-4.19' into asoc-4.20 for rcar depMark Brown
2018-09-03ASoC: rsnd: ssiu: Support to init different BUSIF instanceJiada Wang
Currently ssiu's .init is only called once during audio stream. But SSIU with different BUSIF, shall be initialized each time, even they are used in the same audio stream. This patch introduces ssiu_status for BUSIF0 to BUSIF7 in rsnd_ssiu, to make sure same .init for different BUSIF can always be executed. To avoid the first stopped stream to stop the whole SSIU, which may still has other BUSIF instance running, use usrcnt to count the usage of SSIU, only the last user of SSIU can stop the whole SSIU. Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> [Kuninori: tidyup for upstream] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-03ASoC: rsnd: ssiu: Support BUSIF other than BUSIF0Jiada Wang
Currently only BUSIF0 is supported by SSIU, all register setting is done only for BUSIF. Since BUSIF1 ~ BUSIF7 has been supported, so also support these BUSIF from SSIU. One note is that we can't support SSI9-4/5/6/7 so far, because its address is out of calculation rule. Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> [Kuninori: tidyup for upstream] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-03ASoc: rsnd: dma: Calculate PDMACHCRE with consider of BUSIFJiada Wang
PDMACHCR setting for SSI only considers BUSIF0 so far. But BUSIF1 ~ BUSIF7 also maybe used, in the future. This patch updates table gen2_id_table_ssiu, to also consider BUSIF number used by SSI. Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> [kuninori: adjust to upstreaming] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-03ASoc: rsnd: dma: Calculate dma address with consider of BUSIFJiada Wang
DMA address calculated by rsnd_dma_addr() only considers BUSIF0 so far. But BUSIF1 ~ BUSIF7 also maybe used, in the future. This patch updates DMA address calculations, to also consider BUSIF number used by SSI. One note is that we can't support SSI9-4/5/6/7 so far, because its address is out of calculation rule. Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> [kuninori: adjust to upstreaming] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-03ASoC: rsnd: ssi: Check runtime channel number rather than hw_paramsJiada Wang
The number of channel handled by SSI maybe differs from the one set in hw_params, currently SSI checks hw_params's channel number, and constrains to use same channel number, when it is being used by multiple clients. This patch corrects to check runtime channel number rather than channel number set in hw_params. Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> [kuninori: adjust to upstreaming] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-03ASoC: rsnd: ssi: Fix issue in dma data address assignmentJiada Wang
Same SSI device may be used in different dai links, by only having one dma struct in rsnd_ssi, after the first instance's dma config be initilized, the following instances can no longer configure dma, this causes issue, when their dma data address are different from the first instance. Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> [Kuninori: tidyup for upstream] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-03ASoC: rsnd: remove is_play parameter from hw_rule functionJiada Wang
Currently rsnd_dai_stream *io is set to either &rdai->playback or &rdai->capture based on whether it is a playback or capture stream, in __rsnd_soc_hw_rule_* functions, but this is not necessary, rsnd_dai_stream *io handler can be get from rule->private. This patch removes 'is_play' parameter from hw_rule function. Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> [Kuninori: tidyup for upstream] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-03ASoC: rsnd: add support for 8 bit S8 formatDragos Tarcatu
This patch adds support for SNDRV_PCM_FMTBIT_S8 format. Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> [Kuninori: tidyup for upstream] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-03ASoC: rsnd: add support for the DSP_A/DSP_B formatsDragos Tarcatu
Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> [Kuninori: tidyup for upstream] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-03ASoC: rsnd: add support for 16/24 bit slot widthsDragos Tarcatu
The slot width (system word length) was fixed at 32 bits. This patch allows also setting it to 16 or 24 bits. Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> [Kuninori: tidyup for upstream] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-03ASoC: rsnd: add warning message to rsnd_kctrl_accept_runtime()Jiada Wang
Add warning message to rsnd_kctrl_accept_runtime(), when kctrl update is rejected due to corresponding dai-link is idle. So that user can notice the reason of kctrl update failure. Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> [kuninori: adjust to upstream] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-09-03ASoC: rsnd: fixup not to call clk_get/set under non-atomicJiada Wang
Clocking operations clk_get/set_rate, are non-atomic, they shouldn't be called in soc_pcm_trigger() which is atomic. Following issue was found due to execution of clk_get_rate() causes sleep in soc_pcm_trigger(), which shouldn't be blocked. We can reproduce this issue by following > enable CONFIG_DEBUG_ATOMIC_SLEEP=y > compile, and boot > mount -t debugfs none /sys/kernel/debug > while true; do cat /sys/kernel/debug/clk/clk_summary > /dev/null; done & > while true; do aplay xxx; done This patch adds support to .prepare callback, and moves non-atomic clocking operations to it. As .prepare is non-atomic, it is always called before trigger_start/trigger_stop. BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620 in_atomic(): 1, irqs_disabled(): 128, pid: 2242, name: aplay INFO: lockdep is turned off. irq event stamp: 5964 hardirqs last enabled at (5963): [<ffff200008e59e40>] mutex_lock_nested+0x6e8/0x6f0 hardirqs last disabled at (5964): [<ffff200008e623f0>] _raw_spin_lock_irqsave+0x24/0x68 softirqs last enabled at (5502): [<ffff200008081838>] __do_softirq+0x560/0x10c0 softirqs last disabled at (5495): [<ffff2000080c2e78>] irq_exit+0x160/0x25c Preemption disabled at:[ 62.904063] [<ffff200008be4d48>] snd_pcm_stream_lock+0xb4/0xc0 CPU: 2 PID: 2242 Comm: aplay Tainted: G B C 4.9.54+ #186 Hardware name: Renesas Salvator-X board based on r8a7795 (DT) Call trace: [<ffff20000808fe48>] dump_backtrace+0x0/0x37c [<ffff2000080901d8>] show_stack+0x14/0x1c [<ffff2000086f4458>] dump_stack+0xfc/0x154 [<ffff2000081134a0>] ___might_sleep+0x57c/0x58c [<ffff2000081136b8>] __might_sleep+0x208/0x21c [<ffff200008e5980c>] mutex_lock_nested+0xb4/0x6f0 [<ffff2000087cac74>] clk_prepare_lock+0xb0/0x184 [<ffff2000087cb094>] clk_core_get_rate+0x14/0x54 [<ffff2000087cb0f4>] clk_get_rate+0x20/0x34 [<ffff20000113aa00>] rsnd_adg_ssi_clk_try_start+0x158/0x4f8 [snd_soc_rcar] [<ffff20000113da00>] rsnd_ssi_init+0x668/0x7a0 [snd_soc_rcar] [<ffff200001133ff4>] rsnd_soc_dai_trigger+0x4bc/0xcf8 [snd_soc_rcar] [<ffff200008c1af24>] soc_pcm_trigger+0x2a4/0x2d4 Fixes: e7d850dd10f4 ("ASoC: rsnd: use mod base common method on SSI-parent") Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> [Kuninori: tidyup for upstream] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2018-07-30ASoC: sh: Kconfig: convert to SPDX identifiersKuninori Morimoto
By default all files without license information are under the default license of the kernel, which is GPL version 2. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-07-05ASoC: rsnd: cmd: Add missing newline to debug messageAndrew Gabbasov
To comply with the style of all kernel messages, add newline to the end of every message. Fixes: 70fb10529f61 ("ASoC: rsnd: add MIX (Mixer) support") Signed-off-by: Andrew Gabbasov <andrew_gabbasov@mentor.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-22Merge branch 'asoc-4.18' into asoc-4.19 for amd depMark Brown
2018-06-18ASoC: rsnd: add rsnd_daidrv_get()Kuninori Morimoto
rsnd priv has many parameters. On __rsnd_dai_probe() it uses rsnd_rdai_get() to get rdai pointer, but is using priv->daidrv directly to get daidrvhv, but it is confusable for reader. This patch adds rsnd_daidrv_get() to get daidrv from priv. Now reader can understand that rdai and daidrv are related. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-18ASoC: rsnd: SSI parent cares SWSP bitKuninori Morimoto
SSICR has SWSP bit (= Serial WS Polarity) which decides WS pin 1st channel polarity (low or hi). This bit shouldn't exchange after running. Current SSI "parent" doesn't care SSICR, just controls clock only. Because of this behavior, if platform uses SSI0 as playback, SSI1 as capture, and if user starts capture -> playback order, SSI0 SSICR::SWSP bit exchanged 0 -> 1 during captureing, and it makes capture noise. This patch cares SSICR on SSI parent, too. Special thanks to Yokoyama-san Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-18ASoC: rsnd: has .symmetric_rates if SSIs are sharing WS pinKuninori Morimoto
If SSIs are sharing WS pin, it should has .symmetric_rates. This patch sets it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-18ASoC: sh7760-ac97: convert to SPDX identifiersKuninori Morimoto
Tidyup incoherence between MODULE_LICENSE and header license, too Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-18ASoC: dma-sh7760: convert to SPDX identifiersKuninori Morimoto
Tidyup incoherence between MODULE_LICENSE and header license, too Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-18ASoC: migor: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-18ASoC: rsnd: convert to SPDX identifiersKuninori Morimoto
Tidyup incoherence between MODULE_LICENSE and header license, too Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-18ASoC: siu: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-18ASoC: ssi: convert to SPDX identifiersKuninori Morimoto
Tidyup incoherence between MODULE_LICENSE and header license, too Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-18ASoC: hac: convert to SPDX identifiersKuninori Morimoto
Tidyup incoherence between MODULE_LICENSE and header license, too Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-18ASoC: fsi: convert to SPDX identifiersKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-06-12treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-04-20ASoC: sh: Update menu title and platform dependencyGeert Uytterhoeven
Change the menu title to refer to "Renesas SoCs" instead of "SuperH", as both SuperH and ARM SoCs are supported. Since commit 9b5ba0df4ea4f940 ("ARM: shmobile: Introduce ARCH_RENESAS") is ARCH_RENESAS a more appropriate platform dependency for Renesas ARM SoCs than the legacy ARCH_SHMOBILE, hence use the former. Renesas SuperH SH-Mobile SoCs are still covered by the SUPERH dependency. This will allow to drop ARCH_SHMOBILE on ARM and ARM64 in the near future. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-20ASoC: sh: Drop SUPERH platform dependencyGeert Uytterhoeven
The SIU sound peripheral is used only on SuperH SH-Mobile platforms. As both SUPERH and ARCH_SHMOBILE are set for these platforms, the SUPERH dependency can be dropped. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-16Merge branch 'asoc-4.17' into asoc-4.18 to get adau17x1 changes soMark Brown
further patches can be applied.
2018-04-16ASoC: rsnd: ssi: wait maximum 5ms for status checkKuninori Morimoto
It is waiting udelay(50) x 1024 (= 50ms) for status check in worst case, but it is overkill. And we shouldn't use udelay() for 50us (linux/Documentation/timers/timers-howto.txt) Waiting maximum udelay(5) x 1024 (= 5ms) is very enough for status check. This patch fixes these issue. Reported-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-16ASoC: rsnd: Enable IPMMU v2Kuninori Morimoto
commit 4821d914fe747 ("ASoC: rsnd: use dma_sync_single_for_xxx() for IOMMU") (= v1) which have been already reverted had supported IPMMU support on rsnd driver. Because memory allocating timing and DMAEngine access timing were different, it used continuous memory and called dma map function by itself. OTOH, it is using DMA descriptor mode (= DMA cyclic mode), thus, there was timing conflict between DMA sync/unsync and DMA transfer starting, and it maked sound noise. This patch supports IPMMU with coherent memory, and, it uses Audio DMAC dev for allocating memory by snd_pcm_lib_preallocate_pages_for_all() to indicate memory area to IPMMU. One note is that Playback/Capture need each paired Audio DMAC dev. Because of this, we need to keep each paired Audio DMAC dev when probing, and use it when allocating each memory for IPMMU. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-16ASoC: rsnd: don't assume node full path name for HDMI probingKuninori Morimoto
Current ssi.c is assuming below 2 things to probing HDMI node. 1) remote node is including "hdmi0" or "hdmi1" in node name 2) remote_ep->full_name is including full path name But, these assumptions are broken by below 1) Node names should not use numerical suffixes commit 6b5ac2f1cb11 ("arm64: dts: renesas: r8a7795: Drop bogus HDMI node names suffixes") 2) node full_name no longer include full path name commit a7e4cfb0a7ca ("of/fdt: only store the device node basename in full_name") Because of these reasons, ssi.c can't probe HDMI on current kernel. This patch probes HDMI0/1 by using its address. Note is that we need to keep updating for this address for future generation chip. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-16ASoC: rsnd: add RSND_GEN3 for R-Car Gen3Kuninori Morimoto
rsnd driver is supporting Gen3. The difference between Gen1 and Gen2 were very big, but, between Gen2 and Gen3 are not so much. Thus, it is assuming Gen2 and Gen3 have compatible, therefore, there is no RSND_GEN3 and rsnd_is_gen3() macro. But in the future, it will need Gen2 and Gen3 different operation, and for Gen4. This patch adds missing RSND_GEN3 and rsnd_is_gen3() macro. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Nguyen Viet Dung <dung.nguyen.aj@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-16ASoC: rsnd: makes rsnd_cmd_mod_get() staticKuninori Morimoto
rsnd_cmd_mod_get() is used from cmd.c only. Let's makes it static function Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-04-12ASoC: rsnd: mark PM functions __maybe_unusedArnd Bergmann
The suspend/resume callbacks are now optional, leading to a warning when they are unused: sound/soc/sh/rcar/core.c:1548:12: error: 'rsnd_resume' defined but not used [-Werror=unused-function] static int rsnd_resume(struct device *dev) ^~~~~~~~~~~ sound/soc/sh/rcar/core.c:1539:12: error: 'rsnd_suspend' defined but not used [-Werror=unused-function] static int rsnd_suspend(struct device *dev) This marks the as __maybe_unused to avoid the warning. Fixes: f8a9a29c4fe9 ("ASoC: rsnd: set pm_ops in hibernate-compatible way") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-03-28Merge remote-tracking branches 'asoc/topic/pistachio', 'asoc/topic/pxa', ↵Mark Brown
'asoc/topic/rsnd', 'asoc/topic/rt274' and 'asoc/topic/rt286' into asoc-next
generated by cgit (git 2.34.1) at 2024-06-09 16:46:18 +0000