summaryrefslogtreecommitdiff
path: root/sound/soc
AgeCommit message (Collapse)Author
2024-03-06ASoC: wm8962: Fix up incorrect error message in wm8962_set_fllStuart Henderson
Use source instead of ret, which seems to be unrelated and will always be zero. Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com> Link: https://msgid.link/r/20240306161439.1385643-5-stuarth@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-06ASoC: wm8962: Enable both SPKOUTR_ENA and SPKOUTL_ENA in mono modeStuart Henderson
Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com> Link: https://msgid.link/r/20240306161439.1385643-2-stuarth@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-06ASoC: wm8962: Enable oscillator if selecting WM8962_FLL_OSCStuart Henderson
Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com> Link: https://msgid.link/r/20240306161439.1385643-1-stuarth@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-04ASoC: amd: yc: Add HP Pavilion Aero Laptop 13-be2xxx(8BD6) into DMI quirk tableAl Raj Hassain
The HP Pavilion Aero Laptop 13-be2xxx(8BD6) requires a quirk entry for its internal microphone to function. Signed-off-by: Al Raj Hassain <alrajhassain@gmail.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://msgid.link/r/20240304103924.13673-1-alrajhassain@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-04ASoC: rcar: adg: correct TIMSEL setting for SSI9Andreas Pape
Timing select registers for SRC and CMD are by default referring to the corresponding SSI word select. The calculation rule from HW spec skips SSI8, which has no clock connection. >From section 43.2.18 CMD Output Timing Select Register (CMDOUT_TIMSEL), of R-Car Series, 3rd Generation Hardware User’s Manual Rev.2.20: CMD0_OUT_DIVCLK_ Output Timing SEL [4:0] Signal Select B'0 0110: ssi_ws0 B'0 0111: ssi_ws1 B'0 1000: ssi_ws2 B'0 1001: ssi_ws3 B'0 1010: ssi_ws4 B'0 1011: ssi_ws5 B'0 1100: ssi_ws6 B'0 1101: ssi_ws7 <GAP> B'0 1110: ssi_ws9 B'0 1111: Setting prohibited Fix the erroneous prohibited setting of timsel value 1111 (0xf) for SSI9 by using timsel value 1110 (0xe) instead. This is possible because SSI8 is not connected as shown by <GAP> in the table above. [21.695055] rcar_sound ec500000.sound: b adg[0]-CMDOUT_TIMSEL (32):00000f00/00000f1f Correct the timsel assignment. Fixes: 629509c5bc478c ("ASoC: rsnd: add Gen2 SRC and DMAEngine support") Suggested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Andreas Pape <Andreas.Pape4@bosch.com> Signed-off-by: Yeswanth Rayapati <yeswanth.rayapati@in.bosch.com> Tested-by: Yeswanth Rayapati <yeswanth.rayapati@in.bosch.com> [erosca: massage commit description] Signed-off-by: Eugeniu Rosca <eugeniu.rosca@bosch.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://msgid.link/r/20240301085003.3057-1-erosca@de.adit-jv.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-29ASoC: Intel: bytcr_rt5640: Add an extra entry for the Chuwi Vi8 tabletAlban Boyé
The bios version can differ depending if it is a dual-boot variant of the tablet. Therefore another DMI match is required. Signed-off-by: Alban Boyé <alban.boye@protonmail.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20240228192807.15130-1-alban.boye@protonmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-29ASoC: madera: Fix typo in madera_set_fll_clks shift valueStuart Henderson
Fix a typo in the shift value used in madera_set_fll_clks. Fixes: 3863857dd5ca3 ("ASoC: madera: Enable clocks for input pins when used for the FLL") Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com> Link: https://msgid.link/r/20240229114637.352098-1-stuarth@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-28ASoC: amd: yc: Fix non-functional mic on Lenovo 21J2Jiawei Wang
Like many other models, the Lenovo 21J2 (ThinkBook 16 G5+ APO) needs a quirk entry for the internal microphone to function. Signed-off-by: Jiawei Wang <me@jwang.link> Link: https://msgid.link/r/20240228073914.232204-2-me@jwang.link Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-28ASoC: amd: yc: add new YC platform variant (0x63) supportJiawei Wang
The Lenovo 21J2 (ThinkBook 16 G5+ APO) has this new variant, as detected with lspci: 64:00.5 Multimedia controller: Advanced Micro Devices, Inc. [AMD] ACP/ACP3X/ACP6x Audio Coprocessor (rev 63) Signed-off-by: Jiawei Wang <me@jwang.link> Link: https://msgid.link/r/20240228073914.232204-1-me@jwang.link Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-26ASoC: amd: yc: Add Lenovo ThinkBook 21J0 into DMI quirk tableJohnny Hsieh
This patch adds Lenovo 21J0 (ThinkBook 16 G5+ ARP) to the DMI quirks table to enable internal microphone array. Cc: linux-sound@vger.kernel.org Signed-off-by: Johnny Hsieh <mnixry@outlook.com> Link: https://msgid.link/r/TYSPR04MB8429D62DFDB6727866ECF1DEC55A2@TYSPR04MB8429.apcprd04.prod.outlook.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-23ASoC: soc-card: Fix missing locking in snd_soc_card_get_kcontrol()Richard Fitzgerald
snd_soc_card_get_kcontrol() must be holding a read lock on card->controls_rwsem while walking the controls list. Compare with snd_ctl_find_numid(). The existing function is renamed snd_soc_card_get_kcontrol_locked() so that it can be called from contexts that are already holding card->controls_rwsem (for example, control get/put functions). There are few direct or indirect callers of snd_soc_card_get_kcontrol(), and most are safe. Three require changes, which have been included in this patch: codecs/cs35l45.c: cs35l45_activate_ctl() is called from a control put() function so is changed to call snd_soc_card_get_kcontrol_locked(). codecs/cs35l56.c: cs35l56_sync_asp1_mixer_widgets_with_firmware() is called from control get()/put() functions so is changed to call snd_soc_card_get_kcontrol_locked(). fsl/fsl_xcvr.c: fsl_xcvr_activate_ctl() is called from three places, one of which already holds card->controls_rwsem: 1. fsl_xcvr_mode_put(), a control put function, which will already be holding card->controls_rwsem. 2. fsl_xcvr_startup(), a DAI startup function. 3. fsl_xcvr_shutdown(), a DAI shutdown function. To fix this, fsl_xcvr_activate_ctl() has been changed to call snd_soc_card_get_kcontrol_locked() so that it is safe to call directly from fsl_xcvr_mode_put(). The fsl_xcvr_startup() and fsl_xcvr_shutdown() functions have been changed to take a read lock on card->controls_rsem() around calls to fsl_xcvr_activate_ctl(). While this is not very elegant, it keeps the change small, to avoid this patch creating a large collateral churn in fsl/fsl_xcvr.c. Analysis of other callers of snd_soc_card_get_kcontrol() is that they do not need any changes, they are not holding card->controls_rwsem when they call snd_soc_card_get_kcontrol(). Direct callers of snd_soc_card_get_kcontrol(): fsl/fsl_spdif.c: fsl_spdif_dai_probe() - DAI probe function fsl/fsl_micfil.c: voice_detected_fn() - IRQ handler Indirect callers via soc_component_notify_control(): codecs/cs42l43: cs42l43_mic_shutter() - IRQ handler codecs/cs42l43: cs42l43_spk_shutter() - IRQ handler codecs/ak4118.c: ak4118_irq_handler() - IRQ handler codecs/wm_adsp.c: wm_adsp_write_ctl() - not currently used Indirect callers via snd_soc_limit_volume(): qcom/sc8280xp.c: sc8280xp_snd_init() - DAIlink init function ti/rx51.c: rx51_aic34_init() - DAI init function I don't have hardware to test the fsl/*, qcom/sc828xp.c, ti/rx51.c and ak4118.c changes. Backport note: The fsl/, qcom/, cs35l45, cs35l56 and cs42l43 callers were added since the Fixes commit so won't all be present on older kernels. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 209c6cdfd283 ("ASoC: soc-card: move snd_soc_card_get_kcontrol() to soc-card") Link: https://lore.kernel.org/r/20240221123710.690224-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-21ASoC: qcom: Fix uninitialized pointer dmactlColin Ian King
In the case where __lpass_get_dmactl_handle is called and the driver id dai_id is invalid the pointer dmactl is not being assigned a value, and dmactl contains a garbage value since it has not been initialized and so the null check may not work. Fix this to initialize dmactl to NULL. One could argue that modern compilers will set this to zero, but it is useful to keep this initialized as per the same way in functions __lpass_platform_codec_intf_init and lpass_cdc_dma_daiops_hw_params. Cleans up clang scan build warning: sound/soc/qcom/lpass-cdc-dma.c:275:7: warning: Branch condition evaluates to a garbage value [core.uninitialized.Branch] Fixes: b81af585ea54 ("ASoC: qcom: Add lpass CPU driver for codec dma control") Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://msgid.link/r/20240221134804.3475989-1-colin.i.king@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-19ASoC: cs35l56: Must clear HALO_STATE before issuing SYSTEM_RESETRichard Fitzgerald
The driver must write 0 to HALO_STATE before sending the SYSTEM_RESET command to the firmware. HALO_STATE is in DSP memory, which is preserved across a soft reset. The SYSTEM_RESET command does not change the value of HALO_STATE. There is period of time while the CS35L56 is resetting, before the firmware has started to boot, where a read of HALO_STATE will return the value it had before the SYSTEM_RESET. If the driver does not clear HALO_STATE, this would return BOOT_DONE status even though the firmware has not booted. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 8a731fd37f8b ("ASoC: cs35l56: Move utility functions to shared file") Link: https://msgid.link/r/20240216140535.1434933-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-13ASoC: cs35l56: Workaround for ACPI with broken spk-id-gpios propertyRichard Fitzgerald
The ACPI in some SoundWire laptops has a spk-id-gpios property but it points to the wrong Device node. This patch adds a workaround to try to get the GPIO directly from the correct Device node. If the attempt to get the GPIOs from the property fails, the workaround looks for the SDCA node "AF01", which is where the GpioIo resource is defined. If this exists, a spk-id-gpios mapping is added to that node and then the GPIO is got from that node using the property. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://msgid.link/r/20240209111840.1543630-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-13ASoC: SOF: Intel: pci-tgl/lnl: Change default pathsMark Brown
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: Hi, Align the IPC4 firmware path/name and the topology path to the documentation: default_fw_path: intel/sof-ipc4/{platform_name} default_lib_path: intel/sof-ipc4-lib/{platform_name} default_tplg_path: intel/sof-ipc4-tplg default_fw_filename: sof-{platform_name}.ri Tiger Lake and Lunar Lake support is not yet available via the official firmware release, the paths can be changed now to avoid misalignment in the future. Regards, Peter --- Peter Ujfalusi (2): ASoC: SOF: Intel: pci-tgl: Change the default paths and firmware names ASoC: SOF: Intel: pci-lnl: Change the topology path to intel/sof-ipc4-tplg sound/soc/sof/intel/pci-lnl.c | 2 +- sound/soc/sof/intel/pci-tgl.c | 64 +++++++++++++++++------------------ 2 files changed, 33 insertions(+), 33 deletions(-) -- 2.43.0
2024-02-13ASoC: SOF: IPC3: fix message bounds on ipc opsCurtis Malainey
commit 74ad8ed65121 ("ASoC: SOF: ipc3: Implement rx_msg IPC ops") introduced a new allocation before the upper bounds check in do_rx_work. As a result A DSP can cause bad allocations if spewing garbage. Fixes: 74ad8ed65121 ("ASoC: SOF: ipc3: Implement rx_msg IPC ops") Reported-by: Tim Van Patten <timvp@google.com> Cc: stable@vger.kernel.org Signed-off-by: Curtis Malainey <cujomalainey@chromium.org> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://msgid.link/r/20240213123834.4827-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-13ASoC: SOF: ipc4-pcm: Workaround for crashed firmware on system suspendPeter Ujfalusi
When the system is suspended while audio is active, the sof_ipc4_pcm_hw_free() is invoked to reset the pipelines since during suspend the DSP is turned off, streams will be re-started after resume. If the firmware crashes during while audio is running (or when we reset the stream before suspend) then the sof_ipc4_set_multi_pipeline_state() will fail with IPC error and the state change is interrupted. This will cause misalignment between the kernel and firmware state on next DSP boot resulting errors returned by firmware for IPC messages, eventually failing the audio resume. On stream close the errors are ignored so the kernel state will be corrected on the next DSP boot, so the second boot after the DSP panic. If sof_ipc4_trigger_pipelines() is called from sof_ipc4_pcm_hw_free() then state parameter is SOF_IPC4_PIPE_RESET and only in this case. Treat a forced pipeline reset similarly to how we treat a pcm_free by ignoring error on state sending to allow the kernel's state to be consistent with the state the firmware will have after the next boot. Link: https://github.com/thesofproject/sof/issues/8721 Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://msgid.link/r/20240213115233.15716-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-13ASoC: q6dsp: fix event handler prototypeArnd Bergmann
clang-16 points out a mismatch in function types that was hidden by a typecast: sound/soc/qcom/qdsp6/q6apm-dai.c:355:38: error: cast from 'void (*)(uint32_t, uint32_t, uint32_t *, void *)' (aka 'void (*)(unsigned int, unsigned int, unsigned int *, void *)') to 'q6apm_cb' (aka 'void (*)(unsigned int, unsigned int, void *, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict] 355 | prtd->graph = q6apm_graph_open(dev, (q6apm_cb)event_handler, prtd, graph_id); sound/soc/qcom/qdsp6/q6apm-dai.c:499:38: error: cast from 'void (*)(uint32_t, uint32_t, uint32_t *, void *)' (aka 'void (*)(unsigned int, unsigned int, unsigned int *, void *)') to 'q6apm_cb' (aka 'void (*)(unsigned int, unsigned int, void *, void *)') converts to incompatible function type [-Werror,-Wcast-function-type-strict] 499 | prtd->graph = q6apm_graph_open(dev, (q6apm_cb)event_handler_compr, prtd, graph_id); The only difference here is the 'payload' argument, which is not even used in this function, so just fix its type and remove the cast. Fixes: 88b60bf047fd ("ASoC: q6dsp: q6apm-dai: Add open/free compress DAI callbacks") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://msgid.link/r/20240213101105.459402-1-arnd@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-13ASoC: SOF: Intel: pci-lnl: Change the topology path to intel/sof-ipc4-tplgPeter Ujfalusi
The firmware release which going to introduce support for Lunar Lake will use the documented default topology directory for IPC4: intel/sof-ipc4-tplg Change the default path accordingly before sof-bin (sof-firmware) release includes Lunar Lake firmware and topologies. Link: https://github.com/thesofproject/sof-docs/blob/master/getting_started/intel_debug/introduction.rst#2-topology-file Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Mengdong Lin <mengdong.lin@intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Chao Song <chao.song@linux.intel.com> Link: https://msgid.link/r/20240213080418.21256-3-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-13ASoC: SOF: Intel: pci-tgl: Change the default paths and firmware namesPeter Ujfalusi
The currently used paths and firmware name reflects the reference firmware convention: default_fw_path: intel/avs/{platform_name} default_lib_path: intel/avs-lib/{platform_name} default_tplg_path: intel/avs-tplg default_fw_filename: dsp_basefw.bin The SOF supports building the firmware for cAVS2.5 platforms using IPC4 and it is the preferred IPC4 implementation to be used on these devices. Change the paths and firmware names to reflect this: default_fw_path: intel/sof-ipc4/{platform_name} default_lib_path: intel/sof-ipc4-lib/{platform_name} default_tplg_path: intel/sof-ipc4-tplg default_fw_filename: sof-{platform_name}.ri Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://msgid.link/r/20240213080418.21256-2-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-12ASoC: amd: yc: Fix non-functional mic on Lenovo 82UUAttila Tőkés
Like many other models, the Lenovo 82UU (Yoga Slim 7 Pro 14ARH7) needs a quirk entry for the internal microphone to function. Signed-off-by: Attila Tőkés <attitokes@gmail.com> Link: https://msgid.link/r/20240210193638.144028-1-attitokes@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-12ASoC: rt5645: Add DMI quirk for inverted jack-detect on MeeGoPad T8Hans de Goede
The MeeGoPad T8 uses the standard rt5645 jd_mode=3 setting for jack-detect, but the used jack connector outputs an inverted jack-detect signal. Add a DMI quirk for this. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://msgid.link/r/20240211212736.179605-2-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-12ASoC: rt5645: Make LattePanda board DMI match more preciseHans de Goede
The DMI strings used for the LattePanda board DMI quirks are very generic. Using the dmidecode database from https://linux-hardware.org/ shows that the chosen DMI strings also match the following 2 laptops which also have a rt5645 codec: Insignia NS-P11W7100 https://linux-hardware.org/?computer=E092FFF8BA04 Insignia NS-P10W8100 https://linux-hardware.org/?computer=AFB6C0BF7934 All 4 hw revisions of the LattePanda board have "S70CR" in their BIOS version DMI strings: DF-BI-7-S70CR100-* DF-BI-7-S70CR110-* DF-BI-7-S70CR200-* LP-BS-7-S70CR700-* See e.g. https://linux-hardware.org/?computer=D98250A817C0 Add a partial (non exact) DMI match on this string to make the LattePanda board DMI match more precise to avoid false-positive matches. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://msgid.link/r/20240211212736.179605-1-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-12ASoC: Intel: Boards: Fix NULL pointer deref in BYT/CHTMark Brown
Merge series from Hans de Goede <hdegoede@redhat.com>: While testing 6.8 on a Bay Trail device with a ALC5640 codec I noticed a regression in 6.8 which causes a NULL pointer deref in probe(). All BYT/CHT Intel machine drivers are affected. Patch 1/2 of this series fixes all of them. Patch 2/2 adds some small cleanups to cht_bsw_rt5645.c for issues which I noticed while working on 1/2.
2024-02-11ASoC: SOF: amd: Fix locking in ACP IRQ handlerCristian Ciocaltea
A recent change in acp_irq_thread() was meant to address a potential race condition while trying to acquire the hardware semaphore responsible for the synchronization between firmware and host IPC interrupts. This resulted in an improper use of the IPC spinlock, causing normal kernel memory allocations (which may sleep) inside atomic contexts: 1707255557.133976 kernel: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:315 ... 1707255557.134757 kernel: sof_ipc3_rx_msg+0x70/0x130 [snd_sof] 1707255557.134793 kernel: acp_sof_ipc_irq_thread+0x1e0/0x550 [snd_sof_amd_acp] 1707255557.134855 kernel: acp_irq_thread+0xa3/0x130 [snd_sof_amd_acp] 1707255557.134904 kernel: ? irq_thread+0xb5/0x1e0 1707255557.134947 kernel: ? __pfx_irq_thread_fn+0x10/0x10 1707255557.134985 kernel: irq_thread_fn+0x23/0x60 Moreover, there are attempts to lock a mutex from the same atomic context: 1707255557.136357 kernel: ============================= 1707255557.136393 kernel: [ BUG: Invalid wait context ] 1707255557.136413 kernel: 6.8.0-rc3-next-20240206-audio-next #9 Tainted: G W 1707255557.136432 kernel: ----------------------------- 1707255557.136451 kernel: irq/66-AudioDSP/502 is trying to lock: 1707255557.136470 kernel: ffff965152f26af8 (&sb->s_type->i_mutex_key#2){+.+.}-{3:3}, at: start_creating.part.0+0x5f/0x180 ... 1707255557.137429 kernel: start_creating.part.0+0x5f/0x180 1707255557.137457 kernel: __debugfs_create_file+0x61/0x210 1707255557.137475 kernel: snd_sof_debugfs_io_item+0x75/0xc0 [snd_sof] 1707255557.137494 kernel: sof_ipc3_do_rx_work+0x7cf/0x9f0 [snd_sof] 1707255557.137513 kernel: sof_ipc3_rx_msg+0xb3/0x130 [snd_sof] 1707255557.137532 kernel: acp_sof_ipc_irq_thread+0x1e0/0x550 [snd_sof_amd_acp] 1707255557.137551 kernel: acp_irq_thread+0xa3/0x130 [snd_sof_amd_acp] Fix the issues by reducing the lock scope in acp_irq_thread(), so that it guards only the hardware semaphore acquiring attempt. Additionally, restore the initial locking in acp_sof_ipc_irq_thread() to synchronize the handling of immediate replies from DSP core. Fixes: 802134c8c2c8 ("ASoC: SOF: amd: Refactor spinlock_irq(&sdev->ipc_lock) sequence in irq_handler") Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> Link: https://lore.kernel.org/r/20240208234315.2182048-1-cristian.ciocaltea@collabora.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-11ASoC: rt5645: Fix deadlock in rt5645_jack_detect_work()Alexey Khoroshilov
There is a path in rt5645_jack_detect_work(), where rt5645->jd_mutex is left locked forever. That may lead to deadlock when rt5645_jack_detect_work() is called for the second time. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: cdba4301adda ("ASoC: rt5650: add mutex to avoid the jack detection failure") Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru> Link: https://lore.kernel.org/r/1707645514-21196-1-git-send-email-khoroshilov@ispras.ru Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-11ASoC: Intel: cht_bsw_rt5645: Cleanup codec_name handlingHans de Goede
4 fixes / cleanups to the rt5645 mc driver's codec_name handling: 1. In the for loop looking for the dai_index for the codec, replace card->dai_link[i] with cht_dailink[i]. The for loop already uses ARRAY_SIZE(cht_dailink) as bound and card->dai_link is just a pointer to cht_dailink using card->dai_link only obfuscates that cht_dailink is being modified directly rather then say a copy of cht_dailink. Using cht_dailink[i] also makes the code consistent with other machine drivers. 2. Don't set cht_dailink[dai_index].codecs->name in the for loop, this immediately gets overridden using acpi_dev_name(adev) directly below the loop. 3. Add a missing break to the loop. 4. Remove the now no longer used (only set, never read) codec_name field from struct cht_mc_private. Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240210134400.24913-3-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-11ASoC: Intel: Boards: Fix NULL pointer deref in BYT/CHT boardsHans de Goede
Since commit 13f58267cda3 ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()") dummy snd_soc_dai_link.codecs entries no longer have a name set. This means that when looking for the codec dai_link the machine driver can no longer unconditionally run strcmp() on snd_soc_dai_link.codecs[0].name since this may now be NULL. Add a check for snd_soc_dai_link.codecs[0].name being NULL to all BYT/CHT machine drivers to avoid NULL pointer dereferences in their probe() methods. Fixes: 13f58267cda3 ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()") Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240210134400.24913-2-hdegoede@redhat.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-09ASoC: cs35l56: Remove default from IRQ1_CFG registerRichard Fitzgerald
The driver never uses the IRQ1_CFG register so there's no need to provide a default value. It's set as a readable register only for debugging through the regmap registers file. A system-specific firmware could overwrite this register with a non-default value. Therefore the driver can't hardcode what the initial value actually is. As the register is only for debugging the value can be left unknown until someone wants to read it through debugfs. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/20240209145700.1555950-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-08ASoC: SOF: ipc3-topology: Fix pipeline tear down logicRanjani Sridharan
With the change in the widget free logic to power down the cores only when the scheduler widgets are freed, we need to ensure that the scheduler widget is freed only after all the widgets associated with the scheduler are freed. This is to ensure that the secondary core that the scheduler is scheduled to run on is kept powered on until all widgets that need them are in use. While this works well for dynamic pipelines, in the case of static pipelines the current logic does not take this into account and frees all widgets in the order they occur in the widget_list. So, modify this to ensure that the scheduler widgets are freed only after all other types of widgets in the widget_list are freed. Link: https://github.com/thesofproject/linux/issues/4807 Fixes: 31ed8da1c8e5 ("ASoC: SOF: sof-audio: Modify logic for enabling/disabling topology cores") Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20240208133432.1688-1-peter.ujfalusi@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-08ASoC: cs35l56: Fix deadlock in ASP1 mixer register initializationRichard Fitzgerald
Rewrite the handling of ASP1 TX mixer mux initialization to prevent a deadlock during component_remove(). The firmware can overwrite the ASP1 TX mixer registers with system-specific settings. This is mainly for hardware that uses the ASP as a chip-to-chip link controlled by the firmware. Because of this the driver cannot know the starting state of the ASP1 mixer muxes until the firmware has been downloaded and rebooted. The original workaround for this was to queue a work function from the dsp_work() job. This work then read the register values (populating the regmap cache the first time around) and then called snd_soc_dapm_mux_update_power(). The problem with this is that it was ultimately triggered by cs35l56_component_probe() queueing dsp_work, which meant that it would be running in parallel with the rest of the ASoC component and card initialization. To prevent accessing DAPM before it was fully initialized the work function took the card mutex. But this would deadlock if cs35l56_component_remove() was called before the work job had completed, because ASoC calls component_remove() with the card mutex held. This new version removes the work function. Instead the regmap cache and DAPM mux widgets are initialized the first time any of the associated ALSA controls is read or written. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 07f7d6e7a124 ("ASoC: cs35l56: Fix for initializing ASP1 mixer registers") Link: https://lore.kernel.org/r/20240208123742.1278104-1-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-07ASoC: Intel: avs: Fix dynamic port assignment when TDM is setAmadeusz Sławiński
In case TDM is set in topology on SSP0, parser will overwrite vindex value, because it only checks if port is set. Fix this by checking whole field value. Fixes: e6d50e474e45 ("ASoC: Intel: avs: Improve topology parsing of dynamic strings") Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Link: https://lore.kernel.org/r/20240207112624.2132821-1-amadeuszx.slawinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-07ASoC: cs42l43: Add system suspend ops to disable IRQCharles Keepax
The IRQ should be disabled whilst entering and exiting system suspend to avoid the IRQ handler being called whilst the PM runtime is disabled. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20240206113850.719888-2-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-07ASoC: cs42l43: Handle error from devm_pm_runtime_enableCharles Keepax
As devm_pm_runtime_enable can fail due to memory allocations, it is best to handle the error. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20240206113850.719888-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-06ASoC: amd: yc: Add DMI quirk for Lenovo Ideapad Pro 5 16ARP8Mario Limonciello
The laptop requires a quirk ID to enable its internal microphone. Add it to the DMI quirk table. Reported-by: Stanislav Petrov <stanislav.i.petrov@gmail.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=216925 Cc: stable@vger.kernel.org Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20240205214853.2689-1-mario.limonciello@amd.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-05ASoC: tas2781: add module parameter to tascodec_init()Gergo Koteles
The tascodec_init() of the snd-soc-tas2781-comlib module is called from snd-soc-tas2781-i2c and snd-hda-scodec-tas2781-i2c modules. It calls request_firmware_nowait() with parameter THIS_MODULE and a cont/callback from the latter modules. The latter modules can be removed while their callbacks are running, resulting in a general protection failure. Add module parameter to tascodec_init() so request_firmware_nowait() can be called with the module of the callback. Fixes: ef3bcde75d06 ("ASoC: tas2781: Add tas2781 driver") CC: stable@vger.kernel.org Signed-off-by: Gergo Koteles <soyer@irl.hu> Link: https://lore.kernel.org/r/118dad922cef50525e5aab09badef2fa0eb796e5.1707076603.git.soyer@irl.hu Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-05ASoC: Intel: avs: Fix pci_probe() error pathCezary Rojewski
Recent changes modified operation-order in the probe() function without updating its error path accordingly. If snd_hdac_i915_init() exists with status EPROBE_DEFER the error path must cleanup allocated IRQs before leaving the scope. Fixes: 2dddc514b6e4 ("ASoC: Intel: avs: Move snd_hdac_i915_init to before probe_work.") Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20240202114901.1002127-1-cezary.rojewski@intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-05ASoC: cs35l56: fix reversed if statement in cs35l56_dspwait_asp1tx_put()Dan Carpenter
It looks like the "!" character was added accidentally. The regmap_update_bits_check() function is normally going to succeed. This means the rest of the function is unreachable and we don't handle the situation where "changed" is true correctly. Fixes: 07f7d6e7a124 ("ASoC: cs35l56: Fix for initializing ASP1 mixer registers") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://lore.kernel.org/r/0c254c07-d1c0-4a5c-a22b-7e135cab032c@moroto.mountain Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-01ALSA: Various fixes for Cirrus Logic CS35L56 supportMark Brown
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>: These patches fixe various things that were undocumented, unknown or uncertain when the original driver code was written. And also a few things that were just bugs.
2024-02-01ASoC: cs35l56: Load tunings for the correct speaker modelsRichard Fitzgerald
If the "spk-id-gpios" property is present it points to GPIOs whose value must be used to select the correct bin file to match the speakers. Some manufacturers use multiple sources of speakers, which need different tunings for best performance. On these models the type of speaker fitted is indicated by the values of one or more GPIOs. The number formed by the GPIOs identifies the tuning required. The speaker ID must be used in combination with the subsystem ID (either from PCI SSID or cirrus,firmware-uid property), because the GPIOs can only indicate variants of a specific model. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 1a1c3d794ef6 ("ASoC: cs35l56: Use PCI SSID as the firmware UID") Link: https://msgid.link/r/20240129162737.497-14-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-01ASoC: cs35l56: Firmware file must match the version of preloaded firmwareRichard Fitzgerald
Check during initialization whether the firmware is already patched. If so, include the firmware version in the wm_adsp fwf_name string. If the firmware has already been patched by the BIOS the driver can only replace it if it has control of hard RESET. If the driver cannot replace the firmware, it can still load a wmfw (for ALSA control definitions) and/or a bin (for additional tunings). But these must match the version of firmware that is running on the CS35L56. The firmware is pre-patched if FIRMWARE_MISSING == 0. Including the firmware version in the fwf_name string will qualify the firmware file name: Normal (unpatched or replaceable firmware): cs35l56-rev-dsp1-misc[-system_name].[wmfw|bin] Preloaded firmware: cs35l56-rev[-s]-VVVVVV-dsp1-misc[-system_name].[wmfw|bin] Where: [-s] is an optional -s added into the name for a secured CS35L56 VVVVVV is the 24-bit firmware version in hexadecimal. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 608f1b0dbdde ("ASoC: cs35l56: Move DSP part string generation so that it is done only once") Link: https://msgid.link/r/20240129162737.497-13-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-01ASoC: cs35l56: Fix misuse of wm_adsp 'part' string for silicon revisionRichard Fitzgerald
Put the silicon revision and secured flag in the wm_adsp fwf_name string instead of including them in the part string. This changes the format of the firmware name string from cs35l56[s]-rev-misc[-system_name] to cs35l56-rev[-s]-misc[-system_name] No firmware files have been published, so this doesn't cause a compatibility break. Silicon revision and secured flag are included in the firmware filename to pick a firmware compatible with the part. These strings were being added to the part string, but that is a misuse of the string. The correct place for these is the fwf_name string, which is specifically intended to select between multiple firmware files for the same part. Backport note: This won't apply to kernels older than v6.6. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 608f1b0dbdde ("ASoC: cs35l56: Move DSP part string generation so that it is done only once") Link: https://msgid.link/r/20240129162737.497-12-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-01ASoC: cs35l56: Fix for initializing ASP1 mixer registersRichard Fitzgerald
Defer initializing the state of the ASP1 mixer registers until the firmware has been downloaded and rebooted. On a SoundWire system the ASP is free for use as a chip-to-chip interconnect. This can be either for the firmware on multiple CS35L56 to share reference audio; or as a bridge to another device. If it is a firmware interconnect it is owned by the firmware and the Linux driver should avoid writing the registers. However, if it is a bridge then Linux may take over and handle it as a normal codec-to-codec link. Even if the ASP is used as a firmware-firmware interconnect it is useful to have ALSA controls for the ASP mixer. They are at least useful for debugging. CS35L56 is designed for SDCA and a generic SDCA driver would know nothing about these chip-specific registers. So if the ASP is being used on a SoundWire system the firmware sets up the ASP mixer registers. This means that we can't assume the default state of these registers. But we don't know the initial state that the firmware set them to until after the firmware has been downloaded and booted, which can take several seconds when downloading multiple amps. DAPM normally reads the initial state of mux registers during probe() but this would mean blocking probe() for several seconds until the firmware has initialized them. To avoid this, the mixer muxes are set SND_SOC_NOPM to prevent DAPM trying to read the register state. Custom get/set callbacks are implemented for ALSA control access, and these can safely block waiting for the firmware download. After the firmware download has completed, the state of the mux registers is known so a work job is queued to call snd_soc_dapm_mux_update_power() on each of the mux widgets. Backport note: This won't apply cleanly to kernels older than v6.6. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56") Link: https://msgid.link/r/20240129162737.497-11-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-01ASoC: cs35l56: Fix default SDW TX mixer registersRichard Fitzgerald
Patch the SDW TX mixer registers to silicon defaults. CS35L56 is designed for SDCA and a generic SDCA driver would know nothing about these chip-specific registers. So the firmware sets up the SDW TX mixer registers to whatever audio is relevant on a specific system. This means that the driver cannot assume the initial values of these registers. But Linux has ALSA controls to configure routing, so the registers can be patched to silicon default and the ALSA controls used to select what audio to feed back to the host capture path. Backport note: This won't apply to kernels older than v6.6. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56") Link: https://msgid.link/r/20240129162737.497-9-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-01ASoC: cs35l56: Fix to ensure ASP1 registers match cacheRichard Fitzgerald
Add a dummy SUPPLY widget connected to the ASP that forces the chip registers to match the regmap cache when the ASP is powered-up. On a SoundWire system the ASP is free for use as a chip-to-chip interconnect. This can be either for the firmware on multiple CS35L56 to share reference audio; or as a bridge to another device. If it is a firmware interconnect it is owned by the firmware and the Linux driver should avoid writing the registers. However. If it is a bridge then Linux may take over and handle it as a normal codec-to-codec link. CS35L56 is designed for SDCA and a generic SDCA driver would know nothing about these chip-specific registers. So if the ASP is being used on a SoundWire system the firmware sets up the ASP registers. This means that we can't assume the default state of the ASP registers. But we don't know the initial state that the firmware set them to until after the firmware has been downloaded and booted, which can take several seconds when downloading multiple amps. To avoid blocking probe() for several seconds waiting for the firmware, the silicon defaults are assumed. This allows the machine driver to setup the ASP configuration during probe() without being blocked. If the ASP is hooked up and used, the SUPPLY widget ensures that the chip registers match what was configured in the regmap cache. If the machine driver does not hook up the ASP, it is assumed that it won't call any functions to configure the ASP DAI. Therefore the regmap cache will be clean for these registers so a regcache_sync() will not overwrite the chip registers. If the DAI is not hooked up, the dummy SUPPLY widget will not be invoked so it will never force-overwrite the chip registers. Backport note: This won't apply cleanly to kernels older than v6.6. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56") Link: https://msgid.link/r/20240129162737.497-8-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-01ASoC: cs35l56: Remove buggy checks from cs35l56_is_fw_reload_needed()Richard Fitzgerald
Remove the check of fw_patched from cs35l56_is_fw_reload_needed(). Also remove the redundant check for control of the reset GPIO. The fw_patched flag is set when cs35l56_dsp_work() has completed its steps to download firmware and power-up wm_adsp. There was a check in cs35l56_is_fw_reload_needed() to make a quick exit of 'false' if !fw_patched. The original idea was that the system might be suspended before the driver has ever made any attempt to download firmware, and in that case the driver doesn't need to return to a patched state because it was never in a patched state. This check of fw_patched is buggy because it prevented ever recovering from a failed patch. If a previous attempt to patch and reboot the silicon had failed it would leave fw_patched==false. This would mean the driver never attempted another download even though the fault may have been cleared (by a hard reset, for example). It is also a redundant check because the calling code already makes a quick exit if cs35l56_component_probe() has not been called, which deals with the original intent of this check but in a safer way. The check for reset GPIO is redundant: if the silicon was hard-reset the FIRMWARE_MISSING flag will be 1. But this check created an expectation that the suspend/resume code toggles reset. This can't easily be protected against accidental code breakage. The only reason for the check was to skip runtime-resuming the driver to read the PROTECTION_STATUS register when it already knows it reset the silicon. But in that case the driver will have to be runtime-resumed to do the firmware download. So it created an assumption for no benefit. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 8a731fd37f8b ("ASoC: cs35l56: Move utility functions to shared file") Link: https://msgid.link/r/20240129162737.497-7-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-01ASoC: cs35l56: Don't add the same register patch multiple timesRichard Fitzgerald
Move the call to cs35l56_set_patch() earlier in cs35l56_init() so that it only adds the register patch on first-time initialization. The call was after the post_soft_reset label, so every time this function was run to re-initialize the hardware after a reset it would call regmap_register_patch() and add the same reg_sequence again. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: 898673b905b9 ("ASoC: cs35l56: Move shared data into a common data structure") Link: https://msgid.link/r/20240129162737.497-6-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-01ASoC: cs35l56: cs35l56_component_remove() must clean up wm_adspRichard Fitzgerald
cs35l56_component_remove() must call wm_adsp_power_down() and wm_adsp2_component_remove(). Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56") Link: https://msgid.link/r/20240129162737.497-5-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-01ASoC: cs35l56: cs35l56_component_remove() must clear cs35l56->componentRichard Fitzgerald
The cs35l56->component pointer is used by the suspend-resume handling to know whether the driver is fully instantiated. This is to prevent it queuing dsp_work which would result in calling wm_adsp when the driver is not an instantiated ASoC component. So this pointer must be cleared by cs35l56_component_remove(). Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56") Link: https://msgid.link/r/20240129162737.497-4-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-02-01ASoC: wm_adsp: Don't overwrite fwf_name with the defaultRichard Fitzgerald
There's no need to overwrite fwf_name with a kstrdup() of the cs_dsp part name. It is trivial to select either fwf_name or cs_dsp.part as the string to use when building the filename in wm_adsp_request_firmware_file(). This leaves fwf_name entirely owned by the codec driver. It also avoids problems with freeing the pointer. With the original code fwf_name was either a pointer owned by the codec driver, or a kstrdup() created by wm_adsp. This meant wm_adsp must free it if it set it, but not if the codec driver set it. The code was handling this by using devm_kstrdup(). But there is no absolute requirement that wm_adsp_common_init() must be called from probe(), so this was a pseudo-memory leak - each new call to wm_adsp_common_init() would allocate another block of memory but these would only be freed if the owning codec driver was removed. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Link: https://msgid.link/r/20240129162737.497-3-rf@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2024-05-04 11:29:23 +0000