Age | Commit message (Collapse) | Author |
|
Check for the cases of system-specific bin file without a
wmfw before falling back to looking for a generic wmfw.
All system-specific options should be tried before falling
back to loading a generic wmfw/bin. With the original code,
the presence of a fallback generic wmfw on the filesystem
would prevent using a system-specific tuning with a ROM
firmware.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 0e7d82cbea8b ("ASoC: wm_adsp: Add support for loading bin files without wmfw")
Link: https://msgid.link/r/20240129162737.497-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Previous commit that added support for Huawei MateBook D16 2021
with Ryzen 4600H (HVY-WXX9 M1010) was incomplete.
To activate support for this laptop, the DMI table in
acp3x-es83xx machine driver must also be updated.
Fixes: b5338b1b901e ("ASoC: amd: acp: Add support for a new Huawei Matebook laptop")
Signed-off-by: Marian Postevca <posteuca@mutex.one>
Link: https://msgid.link/r/20240128172229.657142-1-posteuca@mutex.one
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Chen-Yu Tsai <wens@kernel.org>:
This series adds SPDIF controllers for the H616 and H618.
There's also a fix for SPDIF on H6: the controller also has a
receiver that was not correctly modeled.
|
|
The SPDIF hardware block found in the H616 SoC has the same layout as
the one found in the H6 SoC, except that it is missing the receiver
side.
Since the driver currently only supports the transmit function, support
for the H616 is identical to what is currently done for the H6.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://msgid.link/r/20240127163247.384439-4-wens@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The laptop requires a quirk ID to enable its internal microphone. Add
it to the DMI quirk table.
Reported-by: Techno Mooney <techno.mooney@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=218402
Cc: stable@vger.kernel.org
Signed-off-by: Techno Mooney <techno.mooney@gmail.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://msgid.link/r/20240129081148.1044891-1-bagasdotme@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Merge series from Johan Hovold <johan+linaro@kernel.org>:
To reduce the risk of speaker damage the PA gain needs to be limited on
machines like the Lenovo Thinkpad X13s until we have active speaker
protection in place.
Limit the gain to the current default setting provided by the UCM
configuration which most user have so far been using (due to a bug in
the configuration files which prevented hardware volume control [1]).
The wsa883x PA volume control also turned out to be broken, which meant
that the default setting used by UCM configuration is actually the
lowest level (-3 dB). With the codec driver fixed, hardware volume
control also works as expected.
Note that the new wsa884x driver most likely suffers from a similar bug,
I'll send a fix for that once I've got that confirmed.
Included is also a related fix for the LPASS WSA macro driver, which
was changing the digital gain setting behind the back of user space and
which can result in excessive (or too low) digital gain.
There are further Qualcomm codec drivers that similarly appear to
manipulate various gain settings, but on closer inspection it turns out
that they only write back the current settings. Tests reveal that these
writes are indeed needed for any prior updates to take effect (at least
for the WSA and RX macros).
[1] https://github.com/alsa-project/alsa-ucm-conf/pull/382
|
|
Merge series from Zhu Ning <zhuning0077@gmail.com>:
We get some issues regarding crosstalk, THD+N performance and pop
noise from customer's project.
|
|
The UCM configuration for the Lenovo ThinkPad X13s has up until now
been setting the speaker PA volume to the minimum -3 dB when enabling
the speakers, but this does not prevent the user from increasing the
volume further.
Limit the digital gain and PA volumes to a combined -3 dB in the machine
driver to reduce the risk of speaker damage until we have active speaker
protection in place (or higher safe levels have been established).
Note that the PA volume limit cannot be set lower than 0 dB or
PulseAudio gets confused when the first 16 levels all map to -3 dB.
Also note that this will probably need to be generalised using
machine-specific limits, but a common limit should do for now.
Cc: <stable@vger.kernel.org> # 6.5
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/r/20240122181819.4038-3-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove the executable bit that was unintentionally turned on.
Fixes: ee09084fbf9f ("ASoC: codecs: ES8326: Add chip version flag")
Signed-off-by: Fei Shao <fshao@chromium.org>
Link: https://msgid.link/r/20240122062055.1673597-1-fshao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Sound card on Qualcomm X1E80100 CRD board will use eight DAIs in one DAI
link, so increase the limit.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240117160144.1305127-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Driver does not use any regulator code, so drop redundant include of
regulator/consumer.h header.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240117151208.1219755-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Probe calls wcd938x_populate_dt_data() which already prints all the
error cases with dev_err_probe(), so skip the additional dev_err().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240117151208.1219755-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
WCD938x sound codec driver ignores return status of getting regulators
and returns EINVAL instead of EPROBE_DEFER. If regulator provider
probes after the codec, system is left without probed audio:
wcd938x_codec audio-codec: wcd938x_probe: Fail to obtain platform data
wcd938x_codec: probe of audio-codec failed with error -22
Fixes: 16572522aece ("ASoC: codecs: wcd938x-sdw: add SoundWire driver")
Cc: <stable@vger.kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://msgid.link/r/20240117151208.1219755-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Add condition check for cpu dai link initialization for amplifier
codec path, as same pcm id uses for both headset and speaker path
for RENOIR platforms.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://msgid.link/r/20240118143023.1903984-3-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Update platform name for various boards based on rembrandt
and renoir platforms.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://msgid.link/r/20240118143023.1903984-2-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Set and enable rt5682s codec bclk and lrclk rates when
acp is in slave mode.
Signed-off-by: Venkata Prasad Potturu <venkataprasad.potturu@amd.com>
Link: https://msgid.link/r/20240118143023.1903984-1-venkataprasad.potturu@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The lowest headphones volume setting does not mute so the leave the TLV
mute flag unset.
This is specifically needed to let the sound server use the lowest gain
setting.
Fixes: c03226ba15fe ("ASoC: codecs: wcd938x: fix dB range for HPHL and HPHR")
Cc: <stable@vger.kernel.org> # 6.5
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/r/20240122091130.27463-1-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The vendor driver appears to be modifying the gain settings behind the
back of user space but these hacks never made it upstream except for
some essentially dead code that adds a constant zero to the current gain
setting on DAPM events.
Note that the volume registers still need to be written after enabling
clocks in order for any prior updates to take effect.
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/r/20240119112420.7446-5-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The LPASS WSA macro codec driver is updating the digital gain settings
behind the back of user space on DAPM events if companding has been
enabled.
As compander control is exported to user space, this can result in the
digital gain setting being incremented (or decremented) every time the
sound server is started and the codec suspended depending on what the
UCM configuration looks like.
Soon enough playback will become distorted (or too quiet).
This is specifically a problem on the Lenovo ThinkPad X13s as this
bypasses the limit for the digital gain setting that has been set by the
machine driver.
Fix this by simply dropping the compander gain offset hack. If someone
cares about modelling the impact of the compander setting this can
possibly be done by exporting it as a volume control later.
Note that the volume registers still need to be written after enabling
clocks in order for any prior updates to take effect.
Fixes: 2c4066e5d428 ("ASoC: codecs: lpass-wsa-macro: add dapm widgets and route")
Cc: stable@vger.kernel.org # 5.11
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/r/20240119112420.7446-4-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The PA gain can be set in steps of 1.5 dB from -3 dB to 18 dB, that is,
in 15 levels.
Fix the dB values for the PA volume control as experiments using wsa8835
show that the first 16 levels all map to the same lowest gain while the
last three map to the highest gain.
These values specifically need to be correct for the sound server to
provide proper volume control.
Note that level 0 (-3 dB) does not mute the PA so the mute flag should
also not be set.
Fixes: cdb09e623143 ("ASoC: codecs: wsa883x: add control, dapm widgets and map")
Cc: stable@vger.kernel.org # 6.0
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://msgid.link/r/20240119112420.7446-2-johan+linaro@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We get a noise issue during the startup of recording. We update the
register setting and dapm widgets to fix this issue.
we change callback type of es8326_mute function to mute_stream.
ES8326_ADC_MUTE is moved to es8326_mute function so it can
be turned on at last and turned off at first.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://msgid.link/r/20240120101240.12496-6-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We modify the register settings to minimize headphone pop noise
during ES8326 power-up and music start/stop.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://msgid.link/r/20240120101240.12496-5-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We update the values of some registers in the initialization
sequence in es8326_resume function to improve THD+N performance.
THD+N performance decreases if the output level on headphone is
close to full scale. So we change the register setting in
es8326_jack_detect_handler function to improve THD+N performance
if headphone pulgged. Also, the register setting should be restored
when the headset is unplugged
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://msgid.link/r/20240120101240.12496-3-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
We change the crosstalk parameter in es8326_resume function
to improve crosstalk performance.
Adding crosstalk kcontrol to enhance the flexibility of crosstalk
debugging in machine.
Adding ES8326_DAC_CROSSTALK macro to declare the crosstalk register.
Signed-off-by: Zhu Ning <zhuning0077@gmail.com>
Link: https://msgid.link/r/20240120101240.12496-2-zhuning0077@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes:
- Lots of ASoC SOF fixes and related reworks
- ASoC TAS codec fixes including DT updates
- A few HD-audio quirks and regression fixes
- Minor fixes for aloop, oxygen and scarlett2 mixer"
* tag 'sound-fix-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: hda/realtek: Enable headset mic on Lenovo M70 Gen5
ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on HP ZBook
ALSA: hda/relatek: Enable Mute LED on HP Laptop 15s-fq2xxx
ASoC: SOF: ipc4-loader: remove the CPC check warnings
ASoC: SOF: ipc4-pcm: remove log message for LLP
ALSA: hda: generic: Remove obsolete call to ledtrig_audio_get
ALSA: scarlett2: Fix yet more -Wformat-truncation warnings
ALSA: hda: Properly setup HDMI stream
ASoC: audio-graph-card2: fix index check on graph_parse_node_multi_nm()
ASoC: SOF: icp3-dtrace: Revert "Fix wrong kfree() usage"
ALSA: oxygen: Fix right channel of capture volume mixer
ALSA: aloop: Introduce a function to get if access is interleaved mode
ASoC: mediatek: sof-common: Add NULL check for normal_link string
ASoC: mediatek: mt8195: Remove afe-dai component and rework codec link
ASoC: mediatek: mt8192: Check existence of dai_name before dereferencing
ASoC: Intel: bxt_rt298: Fix kernel ops due to COMP_DUMMY change
ASoC: Intel: bxt_da7219_max98357a: Fix kernel ops due to COMP_DUMMY change
ASoC: codecs: rtq9128: Fix TDM enable and DAI format control flow
ASoC: codecs: rtq9128: Fix PM_RUNTIME usage
ASoC: tas2781: Add tas2563 into driver
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"This removes the currently unused CLASS_DDC support (controllers set
the flag, but there is no client to use it).
Also, CLASS_SPD support gets simplified to prepare removal in the
future. Class based instantiation is not recommended these days
anyhow.
Furthermore, I2C core now creates a debugfs directory per I2C adapter.
Current bus driver users were converted to use it.
Finally, quite some driver updates. Standing out are patches for the
wmt-driver which is refactored to support more variants.
This is the rebased pull request where a large series for the
designware driver was dropped"
* tag 'i2c-for-6.8-rc1-rebased' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (38 commits)
MAINTAINERS: use proper email for my I2C work
i2c: stm32f7: add support for stm32mp25 soc
i2c: stm32f7: perform I2C_ISR read once at beginning of event isr
dt-bindings: i2c: document st,stm32mp25-i2c compatible
i2c: stm32f7: simplify status messages in case of errors
i2c: stm32f7: perform most of irq job in threaded handler
i2c: stm32f7: use dev_err_probe upon calls of devm_request_irq
i2c: i801: Add lis3lv02d for Dell XPS 15 7590
i2c: i801: Add lis3lv02d for Dell Precision 3540
i2c: wmt: Reduce redundant: REG_CR setting
i2c: wmt: Reduce redundant: function parameter
i2c: wmt: Reduce redundant: clock mode setting
i2c: wmt: Reduce redundant: wait event complete
i2c: wmt: Reduce redundant: bus busy check
i2c: mux: reg: Remove class-based device auto-detection support
i2c: make i2c_bus_type const
dt-bindings: at24: add ROHM BR24G04
eeprom: at24: use of_match_ptr()
i2c: cpm: Remove linux,i2c-index conversion from be32
i2c: imx: Make SDA actually optional for bus recovering
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
- Core: add concept of controller_id to deal with clear Controller /
Manager hierarchy
- bunch of qcom driver refactoring for qcom_swrm_stream_alloc_ports(),
qcom_swrm_stream_alloc_ports() and setting controller id to hw master
id
* tag 'soundwire-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: amd: drop bus freq calculation and set 'max_clk_freq'
soundwire: generic_bandwidth_allocation use bus->params.max_dr_freq
soundwire: qcom: set controller id to hw master id
soundwire: fix initializing sysfs for same devices on different buses
soundwire: bus: introduce controller_id
soundwire: stream: constify sdw_port_config when adding devices
soundwire: qcom: move sconfig in qcom_swrm_stream_alloc_ports() out of critical section
soundwire: qcom: drop unneeded qcom_swrm_stream_alloc_ports() cleanup
|
|
Now that the driver core can properly handle constant struct bus_type,
move the i2c_bus_type variable to be a constant structure as well, placing
it into read-only memory which can not be modified at runtime.
Note, the sound/soc/rockchip/rk3399_gru_sound.c also needed tweaking as
it decided to save off a pointer to a bus type for internal stuff, and
it was using the i2c_bus_type as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.8
A bunch of small fixes that come in during the merge window, mainly
fixing issues from some core refactoring around dummy components that
weren't detected until things reached mainline.
The TAS driver changes are a little larger than normal for a device ID
addition due to some shuffling around of where things are registered and
DT updates but aren't really any more substantial than normal.
|
|
Warnings related to missing data in firmware manifest have
proven to be too verbose. This relates to description of
DSP module cost expressed in cycles per chunk (CPC). If
a matching value is not found in the manifest, kernel will
pass a zero value and DSP firmware will use a conservative
value in its place.
Downgrade the warnings to dev_dbg().
Fixes: d8a2c9879349 ("ASoC: SOF: ipc4-loader/topology: Query the CPC value from manifest")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240115092209.7184-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
LLP is supported by I2S and SDW platforms but not supported by HDA
platforms. This log is used to notify developer current LLP status
for current device. Since above case is known to developers, the log
is unnecessary and should be removed.
Fixes: 7cb19007baba ("ASoC: SOF: ipc4-pcm: add hw_params")
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240115092209.7184-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was a calm development cycle. There were an ALSA core extension for
subformat PCM bits and a few ASoC core changes to support N:M
mappings, while the most of remaining changes are driver-specific.
Core:
- API extensions for properly limiting PCM format bits via subformat
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2
ASoC:
- Lots of SOF updates: fallback support to older IPC versions,
notification on control changes with IPC4. Also supports for ACPI
parse for the ES83xx driver that reduces quirks.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases)
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100
- Drop of Freescale MPC8610 code that is no longer supported
HD-audio:
- More CS35L41 codec extensions for Dell, HP and Lenovo models
- TAS2781 codec extensions for Lenovo and co
- New PCM subformat supports
Others:
- More enhancement for Scarlett2 USB mixer support
- Various kselftest fixes"
* tag 'sound-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (337 commits)
kselftest/alsa - conf: Stringify the printed errno in sysfs_get()
kselftest/alsa - mixer-test: Fix the print format specifier warning
kselftest/alsa - mixer-test: Fix the print format specifier warning
kselftest/alsa - mixer-test: fix the number of parameters to ksft_exit_fail_msg()
ALSA: hda/tas2781: annotate calibration data endianness
ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 13-ay0xxx
ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140
ALSA: ac97: fix build regression
ALSA: hda: cs35l41: Support more HP models without _DSD
ALSA: hda/tas2781: add fixup for Lenovo 14ARB7
ALSA: hda/tas2781: add TAS2563 support for 14ARB7
ALSA: hda/tas2781: add configurable global i2c address
ALSA: hda/tas2781: add ptrs to calibration functions
ALSA: hda: Add driver properties for cs35l41 for Lenovo Legion Slim 7 Gen 8 serie
ALSA: hda/realtek: enable SND_PCI_QUIRK for Lenovo Legion Slim 7 Gen 8 (2023) serie
ALSA: hda/tas2781: configure the amp after firmware load
ALSA: mark all struct bus_type as const
ASoC: pxa: sspa: Don't select SND_ARM
ASoC: rt5663: cancel the work when system suspends
ALSA: scarlett2: Add PCM Input Switch for Solo Gen 4
...
|
|
Pull drm updates from Dave Airlie:
"This contains two major new drivers:
- imagination is a first driver for Imagination Technologies devices,
it only covers very specific devices, but there is hope to grow it
- xe is a reboot of the i915 GPU (shares display) side using a more
upstream focused development model, and trying to maximise code
sharing. It's not enabled for any hw by default, and will hopefully
get switched on for Intel's Lunarlake.
This also drops a bunch of the old UMS ioctls. It's been dead long
enough.
amdgpu has a bunch of new color management code that is being used in
the Steam Deck.
amdgpu also has a new ACPI WBRF interaction to help avoid radio
interference.
Otherwise it's the usual lots of changes in lots of places.
Detailed summary:
new drivers:
- imagination - new driver for Imagination Technologies GPU
- xe - new driver for Intel GPUs using core drm concepts
core:
- add CLOSE_FB ioctl
- remove old UMS ioctls
- increase max objects to accomodate AMD color mgmt
encoder:
- create per-encoder debugfs directory
edid:
- split out drm_eld
- SAD helpers
- drop edid_firmware module parameter
format-helper:
- cache format conversion buffers
sched:
- move from kthread to workqueue
- rename some internals
- implement dynamic job-flow control
gpuvm:
- provide more features to handle GEM objects
client:
- don't acquire module reference
displayport:
- add mst path property documentation
fdinfo:
- alignment fix
dma-buf:
- add fence timestamp helper
- add fence deadline support
bridge:
- transparent aux-bridge for DP/USB-C
- lt8912b: add suspend/resume support and power regulator support
panel:
- edp: AUO B116XTN02, BOE NT116WHM-N21,836X2, NV116WHM-N49
- chromebook panel support
- elida-kd35t133: rework pm
- powkiddy RK2023 panel
- himax-hx8394: drop prepare/unprepare and shutdown logic
- BOE BP101WX1-100, Powkiddy X55, Ampire AM8001280G
- Evervision VGG644804, SDC ATNA45AF01
- nv3052c: register docs, init sequence fixes, fascontek FS035VG158
- st7701: Anbernic RG-ARC support
- r63353 panel controller
- Ilitek ILI9805 panel controller
- AUO G156HAN04.0
simplefb:
- support memory regions
- support power domains
amdgpu:
- add new 64-bit sequence number infrastructure
- add AMD specific color management
- ACPI WBRF support for RF interference handling
- GPUVM updates
- RAS updates
- DCN 3.5 updates
- Rework PCIe link speed handling
- Document GPU reset types
- DMUB fixes
- eDP fixes
- NBIO 7.9/7.11 updates
- SubVP updates
- XGMI PCIe state dumping for aqua vanjaram
- GFX11 golden register updates
- enable tunnelling on high pri compute
amdkfd:
- Migrate TLB flushing logic to amdgpu
- Trap handler fixes
- Fix restore workers handling on suspend/resume
- Fix possible memory leak in pqm_uninit()
- support import/export of dma-bufs using GEM handles
radeon:
- fix possible overflows in command buffer checking
- check for errors in ring_lock
i915:
- reorg display code for reuse in xe driver
- fdinfo memory stats printing
- DP MST bandwidth mgmt improvements
- DP panel replay enabling
- MTL C20 phy state verification
- MTL DP DSC fractional bpp support
- Audio fastset support
- use dma_fence interfaces instead of i915_sw_fence
- Separate gem and display code
- AUX register macro refactoring
- Separate display module/device parameters
- Move display capabilities debugfs under display
- Makefile cleanups
- Register cleanups
- Move display lock inits under display/
- VLV/CHV DPIO PHY register and interface refactoring
- DSI VBT sequence refactoring
- C10/C20 PHY PLL hardware readout
- DPLL code cleanups
- Cleanup PXP plane protection checks
- Improve display debug msgs
- PSR selective fetch fixes/improvements
- DP MST fixes
- Xe2LPD FBC restrictions removed
- DGFX uses direct VBT pin mapping
- more MTL WAs
- fix MTL eDP bug
- eliminate use of kmap_atomic
habanalabs:
- sysfs entry to identify a device minor id with debugfs path
- sysfs entry to expose device module id
- add signed device info retrieval through INFO ioctl
- add Gaudi2C device support
- pcie reset prepare/done hooks
msm:
- Add support for SDM670, SM8650
- Handle the CFG interconnect to fix the obscure hangs / timeouts
- Kconfig fix for QMP dependency
- use managed allocators
- DPU: SDM670, SM8650 support
- DPU: Enable SmartDMA on SM8350 and SM8450
- DP: enable runtime PM support
- GPU: add metadata UAPI
- GPU: move devcoredumps to GPU device
- GPU: convert to drm_exec
ivpu:
- update FW API
- new debugfs file
- a new NOP job submission test mode
- improve suspend/resume
- PM improvements
- MMU PT optimizations
- firmware profile frequency support
- support for uncached buffers
- switch to gem shmem helpers
- replace kthread with threaded irqs
rockchip:
- rk3066_hdmi: convert to atomic
- vop2: support nv20 and nv30
- rk3588 support
mediatek:
- use devm_platform_ioremap_resource
- stop using iommu_present
- MT8188 VDOSYS1 display support
panfrost:
- PM improvements
- improve interrupt handling as poweroff
qaic:
- allow to run with single MSI
- support host/device time sync
- switch to persistent DRM devices
exynos:
- fix potential error pointer dereference
- fix wrong error checking
- add missing call to drm_atomic_helper_shutdown
omapdrm:
- dma-fence lockdep annotation fix
tidss:
- dma-fence lockdep annotation fix
- support for AM62A7
v3d:
- BCM2712 - rpi5 support
- fdinfo + gputop support
- uapi for CPU job handling
virtio-gpu:
- add context debug name"
* tag 'drm-next-2024-01-10' of git://anongit.freedesktop.org/drm/drm: (2340 commits)
drm/amd/display: Allow z8/z10 from driver
drm/amd/display: fix bandwidth validation failure on DCN 2.1
drm/amdgpu: apply the RV2 system aperture fix to RN/CZN as well
drm/amd/display: Move fixpt_from_s3132 to amdgpu_dm
drm/amd/display: Fix recent checkpatch errors in amdgpu_dm
Revert "drm/amdkfd: Relocate TBA/TMA to opposite side of VM hole"
drm/amd/display: avoid stringop-overflow warnings for dp_decide_lane_settings()
drm/amd/display: Fix power_helpers.c codestyle
drm/amd/display: Fix hdcp_log.h codestyle
drm/amd/display: Fix hdcp2_execution.c codestyle
drm/amd/display: Fix hdcp_psp.h codestyle
drm/amd/display: Fix freesync.c codestyle
drm/amd/display: Fix hdcp_psp.c codestyle
drm/amd/display: Fix hdcp1_execution.c codestyle
drm/amd/pm/smu7: fix a memleak in smu7_hwmgr_backend_init
drm/amdkfd: Fix iterator used outside loop in 'kfd_add_peer_prop()'
drm/amdgpu: Drop 'fence' check in 'to_amdgpu_amdkfd_fence()'
drm/amdkfd: Confirm list is non-empty before utilizing list_first_entry in kfd_topology.c
drm/amdgpu: Fix '*fw' from request_firmware() not released in 'amdgpu_ucode_request()'
drm/amdgpu: Fix variable 'mca_funcs' dereferenced before NULL check in 'amdgpu_mca_smu_get_mca_entry()'
...
|
|
commit d685aea5e0a8 ("ASoC: audio-graph-card2: fix off by one in
graph_parse_node_multi_nm()") uses ">=" instead of ">" for index check,
but it was wrong. The nm_idx will be increment at end of loop,
thus, ">" is correct.
while (1) {
...
=> if (*nm_idx > nm_max)
break;
...
(*nm_idx)++;
}
Without this patch, "Multi-Codec-1" sample on
${LINUX}/sound/soc/generic/audio-graph-card2-custom-sample.dtsi
will be error.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://msgid.link/r/87o7drdqux.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The offending patch introduces memory leak when there is no error, the
memory allocated for the temporary storage is not freed up.
As I have commented, the original code was correct and cleaner to
follow but it was not obvious from the patch that it will introduce
regression.
Fixes: 8c91ca76f448 ("ASoC: SOF: icp3-dtrace: Fix wrong kfree() usage")
Link: https://lore.kernel.org/all/aec61f67-6b4f-49e6-b458-c332983a0ad6@linux.intel.com/
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://msgid.link/r/20240112132749.28970-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"A new drivers/cache/ subsystem is added to contain drivers for
abstracting cache flush methods on riscv and potentially others, as
this is needed for handling non-coherent DMA but several SoCs require
nonstandard hardware methods for it.
op-tee gains support for asynchronous notification with FF-A, as well
as support for a system thread for executing in secure world.
The tee, reset, bus, memory and scmi subsystems have a couple of minor
updates.
Platform specific soc driver changes include:
- Samsung Exynos gains driver support for Google GS101 (Tensor G1)
across multiple subsystems
- Qualcomm Snapdragon gains support for SM8650 and X1E along with
added features for some other SoCs
- Mediatek adds support for "Smart Voltage Scaling" on MT8186 and
MT8195, and driver support for MT8188 along with some code
refactoring.
- Microchip Polarfire FPGA support for "Auto Update" of the FPGA
bitstream
- Apple M1 mailbox driver is rewritten into a SoC driver
- minor updates on amlogic, mvebu, ti, zynq, imx, renesas and
hisilicon"
* tag 'soc-drivers-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (189 commits)
memory: ti-emif-pm: Convert to platform remove callback returning void
memory: ti-aemif: Convert to platform remove callback returning void
memory: tegra210-emc: Convert to platform remove callback returning void
memory: tegra186-emc: Convert to platform remove callback returning void
memory: stm32-fmc2-ebi: Convert to platform remove callback returning void
memory: exynos5422-dmc: Convert to platform remove callback returning void
memory: renesas-rpc-if: Convert to platform remove callback returning void
memory: omap-gpmc: Convert to platform remove callback returning void
memory: mtk-smi: Convert to platform remove callback returning void
memory: jz4780-nemc: Convert to platform remove callback returning void
memory: fsl_ifc: Convert to platform remove callback returning void
memory: fsl-corenet-cf: Convert to platform remove callback returning void
memory: emif: Convert to platform remove callback returning void
memory: brcmstb_memc: Convert to platform remove callback returning void
memory: brcmstb_dpfe: Convert to platform remove callback returning void
soc: qcom: llcc: Fix LLCC_TRP_ATTR2_CFGn offset
firmware: qcom: qseecom: fix memory leaks in error paths
dt-bindings: clock: google,gs101: rename CMU_TOP gate defines
soc: qcom: llcc: Fix typo in kernel-doc
dt-bindings: soc: qcom,aoss-qmp: document the X1E80100 Always-On Subsystem side channel
...
|
|
It's not granted that all entries of struct sof_conn_stream declare
a `normal_link` (a non-SOF, direct link) string, and this is the case
for SoCs that support only SOF paths (hence do not support both direct
and SOF usecases).
For example, in the case of MT8188 there is no normal_link string in
any of the sof_conn_stream entries and there will be more drivers
doing that in the future.
To avoid possible NULL pointer KPs, add a NULL check for `normal_link`.
Fixes: 0caf1120c583 ("ASoC: mediatek: mt8195: extract SOF common code")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://msgid.link/r/20240111105226.117603-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Remove the extra 'mt8195-afe-pcm-dai' component, register the DAI
drivers to the main AFE component, and rework the DAI linking between
the headset codec (RT5682/RT5682S) and the TDM interface in the probe
function to stop assigning name, relying on the of_node of the codec.
Also replace the COMP_DUMMY codec entry with a COMP_EMPTY for the
ETDM2_IN and remove it entirely from ETDM1_OUT to fix the registration
flow for this sound card.
While at it, since we also need to swap the codec init function from
ETDM2_IN to ETDM1_OUT, remove the static assignment of both `ops` and
`init` for both, as we now assign these dynamically during probe.
Fixes: 13f58267cda3 ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://msgid.link/r/20240110105757.539089-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit updates from Shuah Khan:
- a new feature that adds APIs for managing devices introducing a set
of helper functions which allow devices (internally a struct
kunit_device) to be created and managed by KUnit.
These devices will be automatically unregistered on test exit. These
helpers can either use a user-provided struct device_driver, or have
one automatically created and managed by KUnit. In both cases, the
device lives on a new kunit_bus.
- changes to switch drm/tests to use kunit devices
- several fixes and enhancements to attribute feature
- changes to reorganize deferred action function introducing
KUNIT_DEFINE_ACTION_WRAPPER
- new feature adds ability to run tests after boot using debugfs
- fixes and enhancements to string-stream-test:
- parse ERR_PTR in string_stream_destroy()
- unchecked dereference in bug fix in debugfs_print_results()
- handling errors from alloc_string_stream()
- NULL-dereference bug fix in kunit_init_suite()
* tag 'linux_kselftest-kunit-6.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: (27 commits)
kunit: Fix some comments which were mistakenly kerneldoc
kunit: Protect string comparisons against NULL
kunit: Add example of kunit_activate_static_stub() with pointer-to-function
kunit: Allow passing function pointer to kunit_activate_static_stub()
kunit: Fix NULL-dereference in kunit_init_suite() if suite->log is NULL
kunit: Reset test->priv after each param iteration
kunit: Add example for using test->priv
drm/tests: Switch to kunit devices
ASoC: topology: Replace fake root_device with kunit_device in tests
overflow: Replace fake root_device with kunit_device
fortify: test: Use kunit_device
kunit: Add APIs for managing devices
Documentation: Add debugfs docs with run after boot
kunit: add ability to run tests after boot using debugfs
kunit: add is_init test attribute
kunit: add example suite to test init suites
kunit: add KUNIT_INIT_TABLE to init linker section
kunit: move KUNIT_TABLE out of INIT_DATA
kunit: tool: add test for parsing attributes
kunit: tool: fix parsing of test attributes
...
|
|
Following commit 13f58267cda3 ("ASoC: soc.h: don't create dummy
Component via COMP_DUMMY()"), the dai_name field is only populated for
dummy components after the card is registered. This causes a null
pointer dereference in the mt8192-mt6359 sound card driver's probe
function when searching for a dai_name among all the card's dai links.
Verify that the dai_name is non-null before passing it to strcmp. While
at it, also check that there's at least one codec.
Reported-by: kernelci.org bot <bot@kernelci.org>
Closes: https://linux.kernelci.org/test/case/id/6582cd6d992645c680e13478/
Fixes: 13f58267cda3 ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://msgid.link/r/20240108204508.691739-1-nfraprado@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The change to avoid dummy components will leave the component name and
dai_name NULL which will cause NULL dereference when trying to access to
it in the machine driver when applying fixups.
Link: https://github.com/thesofproject/linux/pull/4759#issuecomment-1878641868
Fixes: 13f58267cda3 ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240108094842.28782-3-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
The change to avoid dummy components will leave the component name and
dai_name NULL which will cause NULL dereference when trying to access to
it in the machine driver when applying fixups.
Link: https://github.com/thesofproject/linux/pull/4759#issuecomment-1878641868
Fixes: 13f58267cda3 ("ASoC: soc.h: don't create dummy Component via COMP_DUMMY()")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://msgid.link/r/20240108094842.28782-2-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Updates for v6.8
This is a relatively quiet release, there's a lot of driver specific
changes and the usual high level of activity in the SOF core but the
one big core change was Mormioto-san's work to support more N:M
CPU:CODEC mapping cases. Highlights include:
- Enhanced support for N:M CPU:CODEC mappings in the core and in
audio-graph-card2.
- Support for falling back to older SOF IPC versions where firmware for
new versions is not available.
- Support for notification of control changes generated by SOF firmware
with IPC4.
- Device tree support for describing parts of the card which can be
active over suspend (for very low power playback or wake word use
cases).
- ACPI parsing support for the ES83xx driver, reducing the number of
quirks neede for x86 systems.
- Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm
SM8250, SM8550, SM8650 and X1E80100.
- Removal of Freescale MPC8610 support, the SoC is no longer supported
by Linux.
|
|
Prepare for 6.8 merge.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Merge series from cy_huang@richtek.com:
This patch series fix rtq9128 pm_runtime and TDM usage.
|
|
To enable TDM mode, the current control flow limits the function
calling order should be 'set_tdm_slot->set_dai_fmt'. But not all
platform sound card like as simeple card to follow this design.
To bypass this limit, adjust the DAI format setting in runtime
'hw_param' callback.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://msgid.link/r/c4c8df00d8d179b8b5b39a8521de3a85325c57e8.1703813842.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
If 'pm_runtime_resume_and_get' is used, must check the return value to
prevent the active count not matched problem.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Link: https://msgid.link/r/bebd9e2bed9e0528a7fd9c528d785da02caf4f1a.1703813842.git.cy_huang@richtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move tas2563 from tas2562 driver to tas2781 driver to unbind tas2563 from
tas2562 driver code and bind it to tas2781 driver code, because tas2563
only work in bypass-DSP mode with tas2562 driver. In order to enable DSP
mode for tas2563, it has been moved to tas2781 driver. As to the hardware
part, such as register setting and DSP firmware, all these are stored in
the binary firmware. What tas2781 drivder does is to parse the firmware
and download it to the chip, then power on the chip. So, tas2781 driver
can be resued as tas2563 driver. Only attention will be paid to downloading
corresponding firmware.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://msgid.link/r/20240104145721.1398-4-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Move tas2563 from tas2562 driver to tas2781 driver to unbind tas2563 from
tas2562 driver code and bind it to tas2781 driver code, because tas2563
only work in bypass-DSP mode with tas2562 driver. In order to enable DSP
mode for tas2563, it has been moved to tas2781 driver. As to the hardware
part, such as register setting and DSP firmware, all these are stored in
the binary firmware. What tas2781 drivder does is to parse the firmware
and download it to the chip, then power on the chip. So, tas2781 driver
can be resued as tas2563 driver. Only attention will be paid to
downloading corresponding firmware.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://msgid.link/r/20240104145721.1398-2-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.7
I recently got a LibreTech Sapphire board for my CI and while
integrating it found and fixed some issues, including crashes for the
enum validation. There's also a couple of patches adding quirks for
another x86 laptop from Hans and an error handling fix for the Freescale
rpmsg driver.
|