summaryrefslogtreecommitdiff
path: root/sound/usb
AgeCommit message (Collapse)Author
2017-05-31ALSA: usb: Avoid VLA in mixer_us16x08.cTakashi Iwai
This is another attempt to work around the VLA used in mixer_us16x08.c. Basically the temporary array is used individually for two cases, and we can declare locally in each block, instead of hackish max() usage. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-31ALSA: usb: Fix a typo in Tascam US-16x08 mixer elementTakashi Iwai
A mixer element created in a quirk for Tascam US-16x08 contains a typo: it should be "EQ MidLow Q" instead of "EQ MidQLow Q". Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195875 Fixes: d2bb390a2081 ("ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk") Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-31Revert "ALSA: usb-audio: purge needless variable length array"Takashi Iwai
This reverts commit 89b593c30e83 ("ALSA: usb-audio: purge needless variable length array"). The patch turned out to cause a severe regression, triggering an Oops at snd_usb_ctl_msg(). It was overseen that snd_usb_ctl_msg() writes back the response to the given buffer, while the patch changed it to a read-only const buffer. (One should always double-check when an extra pointer cast is present...) As a simple fix, just revert the affected commit. It was merely a cleanup. Although it brings VLA again, it's clearer as a fix. We'll address the VLA later in another patch. Fixes: 89b593c30e83 ("ALSA: usb-audio: purge needless variable length array") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195875 Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-05-15ALSA: usb-audio: fix Amanero Combo384 quirk on big-endian hostsJohan Hovold
Add missing endianness conversion when using the USB device-descriptor bcdDevice field when applying the Amanero Combo384 (endianness!) quirk. Fixes: 3eff682d765b ("ALSA: usb-audio: Support both DSD LE/BE Amanero firmware versions") Cc: Jussi Laako <jussi@sonarnerd.net> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-17ALSA: usb-audio: replace /proc/bus/usb by /dev/bus/usbMauro Carvalho Chehab
The /proc/bus/usb devices don't exist anymore, since when we got rid of usbfs. Those devices are now seen at /dev/bus/usb. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-14ALSA: usb-line6: constify snd_kcontrol_new strucutre arrayTakashi Sakamoto
In kernel APIs of ALSA control interface, drivers can create a control element set by a call of snd_ctl_new1() with a template. This template is known to have const qualifier in general cases. This commit adds the qualifier to template array, for safer program and runtime. Application of this change moves the symbol from .data section to .rodata section. Cc: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-12ALSA: line6: constify snd_kcontrol_new structuresBhumika Goyal
Declare snd_kcontrol_new strcutures as const as they are only passed as an argument to the function snd_ctl_new1. This argument is of type const, so snd_kcontrol_new structures having this property can be made const too. Done using Coccinelle: @r disable optional_qualifier@ identifier x; position p; @@ static struct snd_kcontrol_new x@p={...}; @ok@ identifier r.x; position p; @@ snd_ctl_new1(&x@p,...) @bad@ position p != {r.p,ok.p}; identifier r.x; @@ x@p @depends on !bad disable optional_qualifier@ identifier r.x; @@ +const struct snd_kcontrol_new x; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-12ALSA: usb-audio: constify snd_kcontrol_new structuresBhumika Goyal
Declare snd_kcontrol_new strcutures as const as they are only passed as an argument to the function snd_ctl_new1. This argument is of type const, so snd_kcontrol_new structures having this property can be made const too. Done using Coccinelle: @r disable optional_qualifier@ identifier x; position p; @@ static struct snd_kcontrol_new x@p={...}; @ok@ identifier r.x; position p; @@ snd_ctl_new1(&x@p,...) @bad@ position p != {r.p,ok.p}; identifier r.x; @@ x@p @depends on !bad disable optional_qualifier@ identifier r.x; @@ +const struct snd_kcontrol_new x; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-31ALSA: usb-audio: Fake also USB device id when alias is givenTakashi Iwai
Recently snd-usb-audio driver received a new option, quirk_alias, to allow user to apply the existing quirk for a different device. This works for many quirks as is, but some still need more tune-ups: namely, some quirks check the USB vendor/device IDs in various places, thus it doesn't work as long as the ID is different from the expected one. With this patch, the driver stores the aliased USB ID, so that these rest quirks per device ID are applied. The transition to use the cached USB ID was already done in the past, so what we needed now is only to overwrite chip->usb_id. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-20Merge branch 'topic/for-4.12' into for-nextTakashi Iwai
2017-02-24mm, fs: reduce fault, page_mkwrite, and pfn_mkwrite to take only vmfDave Jiang
->fault(), ->page_mkwrite(), and ->pfn_mkwrite() calls do not need to take a vma and vmf parameter when the vma already resides in vmf. Remove the vma parameter to simplify things. [arnd@arndb.de: fix ARM build] Link: http://lkml.kernel.org/r/20170125223558.1451224-1-arnd@arndb.de Link: http://lkml.kernel.org/r/148521301778.19116.10840599906674778980.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Theodore Ts'o <tytso@mit.edu> Cc: Darrick J. Wong <darrick.wong@oracle.com> Cc: Matthew Wilcox <mawilcox@microsoft.com> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Jan Kara <jack@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-22ALSA: usb-audio: Tidy up mixer_us16x08.cTakashi Iwai
A few more cleanups and improvements that have been overlooked: - Use ARRAY_SIZE() macro appropriately - Code shuffling for minor optimization - Omit superfluous variable initializations - Get rid of superfluous NULL checks - Add const to snd_us16x08_control_params definitions No functional changes. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-22ALSA: usb-audio: Fix memory leak and corruption in mixer_us16x08.cTakashi Iwai
There are a few places leaking memory and doing double-free in mixer_us16x08.c. The driver allocates a usb_mixer_elem_info object at each add_new_ctl() call. This has to be freed via kctl->private_free, but currently this is done properly only for some controls. Also, the driver allocates three external objects (comp_store, eq_store, meter_store), and these are referred in elem->private_data (it's not kctl->private_data). And these have to be released, but there are none doing it. Moreover, these extra objects have to be released only once. Thus the release should be done only by the first kctl element that refers to it. For fixing these, we call either snd_usb_mixer_elem_free() (only for kctl->private_data) or elem_private_free() (for both kctl->private_data and elem->private_data) via kctl->private_free appropriately. Last but not least, snd_us16x08_controls_create() may return in the middle without releasing the allocated *_store objects due to an error. For fixing this, we shuffle the allocation code so that it's called just before its reference. Fixes: d2bb390a2081 ("ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk") Reported-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-22ALSA: usb-audio: purge needless variable length arrayTakashi Sakamoto
Variable length array is used in 'snd_us16x08_meter_get()', while there is no need. It's better to purge it because variable length array has overhead for stack handling. This commit replaces the array with static length. Sparse generated below warning. sound/usb/mixer_us16x08.c:714:18: warning: Variable length array is used. Fixes: d2bb390a2081 ("ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-21ALSA: usb-audio: constify snd_kcontrol_new structuresBhumika Goyal
Declare snd_kcontrol_new structures as const as they are only passed as an argument to the function add_new_ctl. This agrument is of type const, so snd_kcontrol_new structures having this property can be made const too. Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-20ALSA: usb-audio: localize function without external linkageTakashi Sakamoto
When accessed inner a file, functions should have static qualifier for local-linkage. This commit fixes the bug. Sparse generated below warning. sound/usb/mixer_us16x08.c:1043:32: warning: symbol 'snd_us16x08_create_meter_store' was not declared. Should it be static? Fixes: d2bb390a2081 ("ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-20ALSA: usb-audio: localize one-referrer variableTakashi Sakamoto
When accessed by one referrer inner a file, variables should have static qualifier to declare local-linkage. This commit fixes the bug. Sparse generated below warnings. sound/usb/mixer_us16x08.c:156:13: warning: duplicate const sound/usb/mixer_us16x08.c:156:18: warning: symbol 'route_names' was not declared. Should it be static? Fixes: d2bb390a2081 ("ALSA: usb-audio: Tascam US-16x08 DSP mixer quirk") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-20ALSA: usb-audio: Tascam US-16x08 DSP mixer quirkDetlef Urban
Add mixer quirk for Tascam US-16x08 usb interface. Even that this is an usb compliant device, the input channels and DSP functions (EQ/Compressor) aren't accessible by default. Signed-off-by: Detlef Urban <onkel@paraair.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-07ALSA: line6: Always setup isochronous transfer propertiesAndrej Krutak
While not all line6 devices currently support PCM, it causes no harm to 'have it prepared'. This also fixes toneport, which only has PCM - in which case we previously skipped the USB transfer properties detection completely. Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-07Merge branch 'for-linus' into for-nextTakashi Iwai
2017-02-07Revert "ALSA: line6: Only determine control port properties if needed"Takashi Iwai
This reverts commit f6a0dd107ad0c8b59d1c9735eea4b8cb9f460949. The commit caused a regression on LINE6 Transport that has no control caps. Although reverting the commit may result back in a spurious error message for some device again, it's the simplest regression fix, hence it's taken as is at first. The further code fix will follow later. Fixes: f6a0dd107ad0 ("ALSA: line6: Only determine control port properties if needed") Reported-by: Igor Zinovev <zinigor@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-25Merge branch 'topic/intel-lpe-audio' into for-nextTakashi Iwai
2017-01-12ALSA: usb: Constify snd_rawmidi_opsTakashi Iwai
Now snd_rawmidi_ops is maintained as a const pointer in snd_rawmidi, we can constify the definitions. Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-10ALSA: usb-audio: Add a quirk for Plantronics BT600Dennis Kadioglu
Plantronics BT600 does not support reading the sample rate which leads to many lines of "cannot get freq at ep 0x1" and "cannot get freq at ep 0x82". This patch adds the USB ID of the BT600 to quirks.c and avoids those error messages. Signed-off-by: Dennis Kadioglu <denk@post.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-05ALSA: usb-audio: test EP_FLAG_RUNNING at urb completionIoan-Adrian Ratiu
Testing EP_FLAG_RUNNING in snd_complete_urb() before running the completion logic allows us to save a few cpu cycles by returning early, skipping the pending urb in case the stream was stopped; the stop logic handles the urb and sets the completion callbacks to NULL. Signed-off-by: Ioan-Adrian Ratiu <adi@adirat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-05ALSA: usb-audio: Fix irq/process data synchronizationIoan-Adrian Ratiu
Commit 16200948d83 ("ALSA: usb-audio: Fix race at stopping the stream") was incomplete causing another more severe kernel panic, so it got reverted. This fixes both the original problem and its fallout kernel race/crash. The original fix is to move the endpoint member NULL clearing logic inside wait_clear_urbs() so the irq triggering the urb completion doesn't call retire_capture/playback_urb() after the NULL clearing and generate a panic. However this creates a new race between snd_usb_endpoint_start()'s call to wait_clear_urbs() and the irq urb completion handler which again calls retire_capture/playback_urb() leading to a new NULL dereference. We keep the EP deactivation code in snd_usb_endpoint_start() because removing it will break the EP reference counting (see [1] [2] for info), however we don't need the "can_sleep" mechanism anymore because a new function was introduced (snd_usb_endpoint_sync_pending_stop()) which synchronizes pending stops and gets called inside the pcm prepare callback. It also makes sense to remove can_sleep because it was also removed from deactivate_urbs() signature in [3] so we benefit from more simplification. [1] commit 015618b90 ("ALSA: snd-usb: Fix URB cancellation at stream start") [2] commit e9ba389c5 ("ALSA: usb-audio: Fix scheduling-while-atomic bug in PCM capture stream") [3] commit ccc1696d5 ("ALSA: usb-audio: simplify endpoint deactivation code") Fixes: f8114f8583bb ("Revert "ALSA: usb-audio: Fix race at stopping the stream"") Signed-off-by: Ioan-Adrian Ratiu <adi@adirat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-12-28ALSA: usb-audio: Support both DSD LE/BE Amanero firmware versionsJussi Laako
Add DSD support for both little endian (DSD_U32_LE) and big endian (DSD_U32_BE) version of the Amanero firmware. Signed-off-by: Jussi Laako <jussi@sonarnerd.net> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-12-21Revert "ALSA: usb-audio: Fix race at stopping the stream"Takashi Iwai
This reverts commit 16200948d8353fe29a473a394d7d26790deae0e7. The commit was intended to cover the race condition, but it introduced yet another regression for devices with the implicit feedback, leading to a kernel panic due to NULL-dereference in an irq context. As the race condition that was addressed by the commit is very rare and the regression is much worse, let's revert the commit for rc1, and fix the issue properly in a later patch. Fixes: 16200948d835 ("ALSA: usb-audio: Fix race at stopping the stream") Reported-by: Ioan-Adrian Ratiu <adi@adirat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-12-12ALSA: hiface: Fix M2Tech hiFace driver sampling rate changeJussi Laako
Sampling rate changes after first set one are not reflected to the hardware, while driver and ALSA think the rate has been changed. Fix the problem by properly stopping the interface at the beginning of prepare call, allowing new rate to be set to the hardware. This keeps the hardware in sync with the driver. Signed-off-by: Jussi Laako <jussi@sonarnerd.net> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-12-12ALSA: usb-audio: Eliminate noise at the start of DSD playback.Nobutaka Okabe
[Problem] In some USB DACs, a terrible pop noise comes to be heard at the start of DSD playback (in the following situations). - play first DSD track - change from PCM track to DSD track - change from DSD64 track to DSD128 track (and etc...) - seek DSD track - Fast-Forward/Rewind DSD track [Cause] At the start of playback, there is a little silence. The silence bit pattern "0x69" is required on DSD mode, but it is not like that. [Solution] This patch adds DSD silence pattern to the endpoint settings. Signed-off-by: Nobutaka Okabe <nob77413@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-12-12ALSA: usb-audio: Add native DSD support for TEAC 501/503 DACNobutaka Okabe
This patch adds native DSD support for the following devices. - TEAC NT-503 - TEAC UD-503 - TEAC UD-501 (1) Add quirks for native DSD support for TEAC devices. (2) A specific vendor command is needed to switch between PCM/DOP and DSD mode, same as Denon/Marantz devices. Signed-off-by: Nobutaka Okabe <nob77413@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-12-09Merge branch 'for-linus' into for-nextTakashi Iwai
2016-12-09ALSA: usb-audio: Add QuickCam Communicate Deluxe/S7500 to volume_control_quirksCon Kolivas
The Logitech QuickCam Communicate Deluxe/S7500 microphone fails with the following warning. [ 6.778995] usb 2-1.2.2.2: Warning! Unlikely big volume range (=3072), cval->res is probably wrong. [ 6.778996] usb 2-1.2.2.2: [5] FU [Mic Capture Volume] ch = 1, val = 4608/7680/1 Adding it to the list of devices in volume_control_quirks makes it work properly, fixing related typo. Signed-off-by: Con Kolivas <kernel@kolivas.org> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-12-09ALSA: usb-audio: add implicit fb quirk for Axe-Fx IIAlberto Aguirre
The Axe-Fx II implicit feedback end point and the data sync endpoint are in different interface descriptors. Add quirk to ensure a sync endpoint is properly configured. Signed-off-by: Alberto Aguirre <albaguirre@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-12-06ALSA: usb-audio: more tolerant packetsizeAndreas Pape
since commit 57e6dae1087b ("ALSA: usb-audio: do not trust too-big wMaxPacketSize values"), the expected packetsize is always limited to nominal + 25%. It was discovered, that some devices (Android audio accessory) have a much higher jitter in used packetsizes than 25% which would result in BABBLE condition and dropping of packets. A better solution is so assume the jitter to be the nominal packetsize: -one nearly empty packet followed by a almost 150% sized one. V2: changed to assume max frequency is +50 of nominal packetsize. Signed-off-by: Andreas Pape <apape@de.adit-jv.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Acked-by: Clemens Ladisch <clemens@ladisch.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-12-06ALSA: usb-audio: avoid setting of sample rate multiple times on busDaniel Girnus
Some of userland applications call 'snd_pcm_hw_params()' and 'snd_pcm_hw_prepare()' sequentially, which means 'snd_pcm_hw_prepare()' is called twice and the second 'snd_pcm_hw_prepare()' is called in 'SNDRV_PCM_STATE_PREPARED' state. Some devices are not able to manage this and they will stop playback if the sample rate will be configured several times over USB protocol. V2: updated Changelog Signed-off-by: Daniel Girnus <dgirnus@de.adit-jv.com> Signed-off-by: Jens Lorenz <jlorenz@de.adit-jv.com> Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-12-05ALSA: usb-audio: Fix race at stopping the streamTakashi Iwai
We've got a kernel crash report showing like: Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = a1d7c000 [00000008] *pgd=31c93831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT SMP ARM CPU: 0 PID: 250 Comm: dbus-daemon Not tainted 3.14.51-03479-gf50bdf4 #1 task: a3ae61c0 ti: a08c8000 task.ti: a08c8000 PC is at retire_capture_urb+0x10/0x1f4 [snd_usb_audio] LR is at snd_complete_urb+0x140/0x1f0 [snd_usb_audio] pc : [<7f0eb22c>] lr : [<7f0e57fc>] psr: 200e0193 sp : a08c9c98 ip : a08c9ce8 fp : a08c9ce4 r10: 0000000a r9 : 00000102 r8 : 94cb3000 r7 : 94cb3000 r6 : 94d0f000 r5 : 94d0e8e8 r4 : 94d0e000 r3 : 7f0eb21c r2 : 00000000 r1 : 94cb3000 r0 : 00000000 Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 31d7c04a DAC: 00000015 Process dbus-daemon (pid: 250, stack limit = 0xa08c8238) Stack: (0xa08c9c98 to 0xa08ca000) ... Backtrace: [<7f0eb21c>] (retire_capture_urb [snd_usb_audio]) from [<7f0e57fc>] (snd_complete_urb+0x140/0x1f0 [snd_usb_audio]) [<7f0e56bc>] (snd_complete_urb [snd_usb_audio]) from [<80371118>] (__usb_hcd_giveback_urb+0x78/0xf4) [<803710a0>] (__usb_hcd_giveback_urb) from [<80371514>] (usb_giveback_urb_bh+0x8c/0xc0) [<80371488>] (usb_giveback_urb_bh) from [<80028e3c>] (tasklet_hi_action+0xc4/0x148) [<80028d78>] (tasklet_hi_action) from [<80028358>] (__do_softirq+0x190/0x380) [<800281c8>] (__do_softirq) from [<80028858>] (irq_exit+0x8c/0xfc) [<800287cc>] (irq_exit) from [<8000ea88>] (handle_IRQ+0x8c/0xc8) [<8000e9fc>] (handle_IRQ) from [<800085e8>] (gic_handle_irq+0xbc/0xf8) [<8000852c>] (gic_handle_irq) from [<80509044>] (__irq_svc+0x44/0x78) [<80508820>] (_raw_spin_unlock_irq) from [<8004b880>] (finish_task_switch+0x5c/0x100) [<8004b824>] (finish_task_switch) from [<805052f0>] (__schedule+0x48c/0x6d8) [<80504e64>] (__schedule) from [<805055d4>] (schedule+0x98/0x9c) [<8050553c>] (schedule) from [<800116c8>] (do_work_pending+0x30/0xd0) [<80011698>] (do_work_pending) from [<8000e160>] (work_pending+0xc/0x20) Code: e1a0c00d e92ddff0 e24cb004 e24dd024 (e5902008) Kernel panic - not syncing: Fatal exception in interrupt There is a race between retire_capture_urb() and stop_endpoints(). The latter is called at stopping the stream and it sets some endpoint fields to NULL. But its call is asynchronous, thus the pending complete callback might get called after these NULL clears, and it leads the NULL dereference like the above. The fix is to move the NULL clearance after the synchronization, i.e. wait_clear_urbs(). This is called at prepare and hw_free callbacks, so it's assured to be called before the restart of the stream or the release of the stream. Also, while we're at it, put the EP_FLAG_RUNNING flag check at the beginning of snd_complete_urb() to skip the pending complete after the stream is stopped. Fixes: b2eb950de2f0 ("ALSA: usb-audio: stop both data and sync...") Reported-by: Jiada Wang <jiada_wang@mentor.com> Reported-by: Mark Craske <Mark_Craske@mentor.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-11-29ALSA: usb-audio: Fix bogus error return in snd_usb_create_stream()Takashi Iwai
The function returns -EINVAL even if it builds the stream properly. The bogus error code sneaked in during the code refactoring, but it wasn't noticed until now since the returned error code itself is ignored in anyway. Kill it here, but there is no behavior change by this patch, obviously. Fixes: e5779998bf8b ('ALSA: usb-audio: refactor code') Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-11-29ALSA: line6: Claim pod x3 usb data interfaceAndrej Krutak
Userspace apps have to claim USB interfaces before using endpoints in them (drivers/usb/core/devio.c:checkintf()). It's a lock mechanism so that two "drivers" don't steal data from each other. Kernel drivers don't have to claim interfaces to work - but they should, to lock out userspace. While there, fix line6_properties struct to match checkpatch.pl. Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-11-14ALSA: usb-audio: Fix use-after-free of usb_device at disconnectTakashi Iwai
The usb-audio driver implements the deferred device disconnection for the device in use. In this mode, the disconnection callback returns immediately while the actual ALSA card object removal happens later when all files get closed. As Shuah reported, this code flow, however, leads to a use-after-free, detected by KASAN: BUG: KASAN: use-after-free in snd_usb_audio_free+0x134/0x160 [snd_usb_audio] at addr ffff8801c863ce10 Write of size 8 by task pulseaudio/2244 Call Trace: [<ffffffff81b31473>] dump_stack+0x67/0x94 [<ffffffff81564ef1>] kasan_object_err+0x21/0x70 [<ffffffff8156518a>] kasan_report_error+0x1fa/0x4e0 [<ffffffff81564ad7>] ? kasan_slab_free+0x87/0xb0 [<ffffffff81565733>] __asan_report_store8_noabort+0x43/0x50 [<ffffffffa0fc0f54>] ? snd_usb_audio_free+0x134/0x160 [snd_usb_audio] [<ffffffffa0fc0f54>] snd_usb_audio_free+0x134/0x160 [snd_usb_audio] [<ffffffffa0fc0fb1>] snd_usb_audio_dev_free+0x31/0x40 [snd_usb_audio] [<ffffffff8243c78a>] __snd_device_free+0x12a/0x210 [<ffffffff8243d1f5>] snd_device_free_all+0x85/0xd0 [<ffffffff8242cae4>] release_card_device+0x34/0x130 [<ffffffff81ef1846>] device_release+0x76/0x1e0 [<ffffffff81b37ad7>] kobject_release+0x107/0x370 ..... Object at ffff8801c863cc80, in cache kmalloc-2048 size: 2048 Allocated: [<ffffffff810804eb>] save_stack_trace+0x2b/0x50 [<ffffffff81564296>] save_stack+0x46/0xd0 [<ffffffff8156450d>] kasan_kmalloc+0xad/0xe0 [<ffffffff81560d1a>] kmem_cache_alloc_trace+0xfa/0x240 [<ffffffff8214ea47>] usb_alloc_dev+0x57/0xc90 [<ffffffff8216349d>] hub_event+0xf1d/0x35f0 .... Freed: [<ffffffff810804eb>] save_stack_trace+0x2b/0x50 [<ffffffff81564296>] save_stack+0x46/0xd0 [<ffffffff81564ac1>] kasan_slab_free+0x71/0xb0 [<ffffffff81560929>] kfree+0xd9/0x280 [<ffffffff8214de6e>] usb_release_dev+0xde/0x110 [<ffffffff81ef1846>] device_release+0x76/0x1e0 .... It's the code trying to clear drvdata of the assigned usb_device where the usb_device itself was already released in usb_release_dev() after the disconnect callback. This patch fixes it by checking whether the code path is via the disconnect callback, i.e. chip->shutdown flag is set. Fixes: 79289e24194a ('ALSA: usb-audio: Refer to chip->usb_id for quirks...') Reported-and-tested-by: Shuah Khan <shuahkh@osg.samsung.com> Cc: <stable@vger.kernel.org> # v4.6+ Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-10-27ALSA: usb-audio: Add quirk for Syntek STK1160Marcel Hasler
The stk1160 chip needs QUIRK_AUDIO_ALIGN_TRANSFER. This patch resolves the issue reported on the mailing list (http://marc.info/?l=linux-sound&m=139223599126215&w=2) and also fixes bug 180071 (https://bugzilla.kernel.org/show_bug.cgi?id=180071). Signed-off-by: Marcel Hasler <mahasler@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-10-12ALSA: line6: fix a crash in line6_hwdep_write()Dan Carpenter
The error checking here is messed up so we could end up dereferencing -EFAULT. Fixes: a16039cbf1a1 ('ALSA: line6: Add hwdep interface to access the POD control messages') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-10-10ALSA: line6: Fix POD X3 Live audio inputAndrej Krutak
The commit c039aaa77a7d1d9375665a8b59ec16dc7d23e259 was incomplete, missing part of the setup for Live. This makes also audio input work, in addition to audio output. Fixes: c039aaa77a7d1d9375665a8b59ec16dc7d23e259 Reported-by: Eddi De Pieri <eddi@depieri.net> Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-29Merge branch 'for-linus' into for-nextTakashi Iwai
2016-09-25ALSA: usb-line6: use the same declaration as definition in header for MIDI ↵Takashi Sakamoto
manufacturer ID Currently, usb-line6 module exports an array of MIDI manufacturer ID and usb-pod module uses it. However, the declaration is not the definition in common header. The difference is explicit length of array. Although compiler calculates it and everything goes well, it's better to use the same representation between definition and declaration. This commit fills the length of array for usb-line6 module. As a small good sub-effect, this commit suppress below warnings from static analysis by sparse v0.5.0. sound/usb/line6/driver.c:274:43: error: cannot size expression sound/usb/line6/driver.c:275:16: error: cannot size expression sound/usb/line6/driver.c:276:16: error: cannot size expression sound/usb/line6/driver.c:277:16: error: cannot size expression Fixes: 705ececd1c60 ("Staging: add line6 usb driver") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-23ALSA: usb-audio: Extend DragonFly dB scale quirk to cover other variantsAnssi Hannula
The DragonFly quirk added in 42e3121d90f4 ("ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly") applies a custom dB map on the volume control when its range is reported as 0..50 (0 .. 0.2dB). However, there exists at least one other variant (hw v1.0c, as opposed to the tested v1.2) which reports a different non-sensical volume range (0..53) and the custom map is therefore not applied for that device. This results in all of the volume change appearing close to 100% on mixer UIs that utilize the dB TLV information. Add a fallback case where no dB TLV is reported at all if the control range is not 0..50 but still 0..N where N <= 1000 (3.9 dB). Also restrict the quirk to only apply to the volume control as there is also a mute control which would match the check otherwise. Fixes: 42e3121d90f4 ("ALSA: usb-audio: Add a more accurate volume quirk for AudioQuest DragonFly") Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Reported-by: David W <regulars@d-dub.org.uk> Tested-by: David W <regulars@d-dub.org.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-21ALSA: line6: snd-usb-line6 depends on CONFIG_SND_HWDEPValdis Kletnieks
ERROR: "snd_hwdep_new" [sound/usb/line6/snd-usb-line6.ko] undefined! scripts/Makefile.modpost:91: recipe for target '__modpost' failed make[1]: *** [__modpost] Error 1 Fixes: a16039cbf1a1 ('ALSA: line6: Add hwdep interface to access the POD control messages') Signed-off-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-20ALSA: line6: fix ifnullfree.cocci warningskbuild test robot
sound/usb/line6/driver.c:484:2-7: WARNING: NULL check before freeing functions like kfree, debugfs_remove, debugfs_remove_recursive or usb_free_urb is not needed. Maybe consider reorganizing relevant code to avoid passing NULL values. NULL check before some freeing functions is not needed. Based on checkpatch warning "kfree(NULL) is safe this check is probably not required" and kfreeaddr.cocci by Julia Lawall. Generated by: scripts/coccinelle/free/ifnullfree.cocci CC: Andrej Krutak <dev@andree.sk> Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-19ALSA: line6: Add hwdep interface to access the POD control messagesAndrej Krutak
We must do it this way, because e.g. POD X3 won't play any sound unless the host listens on the bulk EP, so we cannot export it only via libusb. The driver currently doesn't use the bulk EP messages in other way, in future it could e.g. sense/modify volume(s). Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-09-19ALSA: line6: Cleanup podhd initializationAndrej Krutak
Only initialize PCM for POD HD devices that support it. No POD HD seems to support MIDI, thus drop the initialization. Signed-off-by: Andrej Krutak <dev@andree.sk> Signed-off-by: Takashi Iwai <tiwai@suse.de>