summaryrefslogtreecommitdiff
path: root/sound/x86/intel_hdmi_lpe_audio.h
AgeCommit message (Collapse)Author
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 285Thomas Gleixner
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 of the license this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 100 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.918357685@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-02-10ALSA: x86: Allow single period PCM operationTakashi Iwai
This is an implementation of PCM streaming with only 1 period. Since the hardware requires the refresh of BDs after each BD processing finishes, we'd need at least two BDs. The trick is that both BDs point to the same content: the address of the PCM buffer head, and the whole buffer size. Then it loops over to the whole buffer again after it finished once. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-07ALSA: x86: Rearrange definesTakashi Iwai
We have two header files and everything is mixed up chaotically. Move the chip-specific definitions like the hardware registers to intel_hdmi_lpe_audio.h, and the rest, the implementation specific stuff into intel_hdmi_audio.h. In addition, put some more comments to the register fields, and fix the incorrect name prefix for AUD_HDMI_STATUS bits, too. The whole changes are merely a code shuffling, and there is no functional change. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-07ALSA: x86: Fix driver name string overflowTakashi Iwai
The driver sets card->driver name string over its size (16 bytes). Shorten the name string to fit with it. Also, set more verbose string to card->shortname and ->longname. This doesn't have to be identical with card->driver at all. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-06ALSA: x86: Refactor PCM process engineTakashi Iwai
This is again a big rewrite of the driver; now it touches the code to process PCM stream transfers. The most fundamental change is that the driver may support more than four periods. Instead of keeping the same index between both the ring buffer (with the fixed four buffer descriptors) and the PCM buffer periods, we keep difference indices for both (bd_head and pcm_head fields). In addition, when the periods are more than four, we need to track both head and next indices. That is, we now have three indices: bd_head, pcm_head and pcm_filled. Also, the driver works better for periods < 4, too: the remaining BDs out of four are marked as invalid, so that the hardware skips those BDs in its loop. By this flexibility, we can use even ALSA-lib dmix plugin, which requires 16 periods as default. The buffer size could be up to 20bit, so the max buffer size was increased accordingly. However, the buffer pre-allocation is kept as the old value (600kB) as default. The reason is the limited number of BDs: since it doesn't suffice for the useful SG page management that can fit with the usual page allocator like some other drivers, we have to still allocate continuous pages, hence we shouldn't take too big memories there. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-03ALSA: x86: Rename drv_status to connectedTakashi Iwai
After the rewrite of the runtime PM code, we have only two driver status: CONNECTED and DISCONNECTED. So it's clearer to use a boolean flag, and name it easier one, "connected". Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-03ALSA: x86: Clean up unused defines and inclusionsTakashi Iwai
Many defines and constants are left unused. Clean them up. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-03ALSA: x86: Reduce redundant register field namesTakashi Iwai
Currently each register definition contains the own prefix in the union struct itself; for example, union aud_ch_status_0 has status_0_regx and status_0_regval fields. These are simply superfluous, since usually the type of the variable is seen in its declaration or in its name. In this patch, we cut off these prefixes. Now all register definitions have regx and regval fields consistently, instead. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-03ALSA: x86: Use the standard ELD bytes definitionsTakashi Iwai
We have some constants defined in drm/drm_edid.h, and clean up our own definitions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-03ALSA: x86: Move stream status into pcm_stream_infoTakashi Iwai
The only remaining field in struct had_stream_data is stream_type that holds the current stream status. Such information fits better in struct pcm_stream_info, so move it as a boolean "running" field to be clearer. This allows us to get rid or had_stream_data definition and references. Also, the superfluous status check get removed in a couple of places where we can call PCM helpers in anyway. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-03ALSA: x86: Drop redundant had_stream_pvtTakashi Iwai
The had_stream_pvt struct assigned to PCM runtime private data tracks merely the stream running status, and the very same information is carried by had_stream->stream_type. Kill it. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-03ALSA: x86: Drop superfluous state fieldTakashi Iwai
The state field keeps the connection state and it's basically as same as drv_status field. Drop this redundancy. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-03ALSA: x86: Remove _v[12] sufficesTakashi Iwai
Although we dropped the most of the obsoleted *_v1 definitions and codes, some codes still keep the _v1 or _v2 suffices. Now they are ripped off. The only thing to be done carefully here is the definition of control offsets. The original code defines enum hdmi_ctrl_reg_offset_v1 and a few new elements just for v2 on its top. After this cleanup, we remove the old AUD_HDMI_STATUS and AUD_HDMIW_INFOFR definitions and replace with the v2 values. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-03ALSA: x86: Flatten two abstraction layersTakashi Iwai
This is the final stage for a big clean-up series. Here we flatten the two layers into one. Formerly, the implementation was split to HDMI "shell" that talks with the platform device, and HDMI audio part that communicates via caps and other event handlers. All these would be good if there were multiple instantiations or if there were data protection. But neither are true in our case. That said, it'll be easier to have a flat driver structure in the end. In this patch, the former struct hdmi_lpe_audio_ctx is forged into the existing struct snd_intelhad. The latter has already a few members that are basically the copy from the former. Only a few new members for the lowlevel I/O are added by this change. Then, the had_get_caps() and had_set_caps() are simply replaced with the direct calls to copy the data in the struct fields. Also, the had_event_handler() calls are replaced with the direct call for each event as well. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-03ALSA: x86: Drop the global platform device referenceTakashi Iwai
Instead of referring to the global hlpe_pdev variable, pass the platform device object to each function properly. Accessing to the global object is really ugly and error-prone. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-03ALSA: x86: Drop unused mid_hdmi_audio_is_busy()Takashi Iwai
The function is nowhere used. Kill it. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-03ALSA: x86: Call event callback directlyTakashi Iwai
Currently the driver calls the event callback stored in its ctx pointer, but it's obviously inefficient. Replace it with the direct calls. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-03ALSA: x86: Pass snd_intelhad object to helpersTakashi Iwai
For reducing the global variable reference, keep snd_intelhad object in the context and pass it to each helper. It's a preliminary change for further cleanup. This also includes the simplification of the probe procedure: the LPE platform driver directly gets the created snd_intelhad object by hdmi_audio_probe(), and passes it to each helper and destructor, hdmi_audio_remove(). The hdmi_audio_probe() function doesn't call the back-registration any longer, which is fairly useless. The LPE platform driver initializes the stuff instead at the right place, and calls the wq after the object creation in the probe function itself. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-03ALSA: x86: Drop snd_intel_had_interface indirect callsTakashi Iwai
Yet another indirection is killed: at this time, it's snd_intel_had_interface. It contains also the name string, but it's nowhere used, thus we can kill it, too. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-03ALSA: x86: Replace indirect query_ops with direct callsTakashi Iwai
Like the previous patch, this replaces the indirect query_ops calls via direct function calls. They are only get_caps and set_caps, so fairly straightforward at this time. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-03ALSA: x86: Replace indirect register ops with direct callsTakashi Iwai
Now about the indirect register ops: they are replaced with direct calls, too. The read / write / modify ops are simply replaced with the corresponding functions. The difference is that we calculate the offset inside the function now. So all the had_config_offset references in the caller side are dropped. This also simplifies the DP-audio check in hdmi_audio_write() and hdmi_audio_rmw(). The hdmi_audio_get_register_base is dropped since it's no longer used when the base address and config offset are referred in the read/write functions. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-03ALSA: x86: Remove v1 ops and structsTakashi Iwai
The v1 code refers to Medfield/Clovertrail. It's not used at all in the current driver, and probably won't be ever. Let's clean this up, then we can go to the next stage of cleanup tasks. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-01ALSA: x86: intel_hdmi: add definitions and logic for DP audioPierre-Louis Bossart
Imported from legacy patches Note: the new code doesn't assume a modified ELD but an explicit notification that DP is present. It appears that the i915 code does change the ELD so we could use the ELD-based tests to check for DP audio Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-01-25ALSA: add Intel HDMI LPE audio driver for BYT/CHT-TJerome Anand
On Baytrail and Cherrytrail, HDaudio may be fused out or disabled by the BIOS. This driver enables an alternate path to the i915 display registers and DMA. Although there is no hardware path between i915 display and LPE/SST audio clusters, this HDMI capability is referred to in the documentation as "HDMI LPE Audio" so we keep the name for consistency. There is no hardware path or control dependencies with the LPE/SST DSP functionality. The hdmi-lpe-audio driver will be probed when the i915 driver creates a child platform device. Since this driver is neither SoC nor PCI, a new x86 folder is added Additional indirections in the code will be cleaned up in the next series to aid smoother DP integration Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Jerome Anand <jerome.anand@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>