summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2019-03-18ASoC: simple-amplifier: Make gpio property optionalMylène Josserand
Some amplifier may not have a GPIO to control the power, but instead simply rely on the regulator to power up and down the amplifier. In order to support those setups, let's make the GPIO optional. Signed-off-by: Mylène Josserand <mylene.josserand@bootlin.com> Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-18Merge tag 'v5.1-rc1' into asoc-5.2Mark Brown
Linux 5.1-rc1
2019-03-15Merge tag 'sound-fix-5.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Some cleaning after the first batch; mostly about HD-audio quirks but also some NULL dereference fixes in corner cases and a random build error fix, too" * tag 'sound-fix-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek - Add support headset mode for New DELL WYSE NB ALSA: hda/realtek - Add support headset mode for DELL WYSE AIO ALSA: hda/realtek: merge alc_fixup_headset_jack to alc295_fixup_chromebook ALSA: pcm: Fix function name in kernel-doc comment ALSA: hda: hdmi - add Icelake support ALSA: hda - add more quirks for HP Z2 G4 and HP Z240 ALSA: hda/realtek - Fixed Headset Mic JD not stable ALSA: hda/realtek: Enable headset MIC of Acer TravelMate X514-51T with ALC255 ALSA: hda/tegra: avoid build error without CONFIG_PM ALSA: usx2y: Fix potential NULL pointer dereference ALSA: hda: Avoid NULL pointer dereference at snd_hdac_stream_start()
2019-03-15ASoC: topology: create tlv before soc_tplg_init_kcontrolBard liao
Component driver may want to use tlv data. Create tlv before soc_tplg_init_kcontrol so component driver can use the tlv data in the control_load ops. Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-14ALSA: hda/realtek - Add support headset mode for New DELL WYSE NBKailang Yang
Enable headset mode support for new WYSE NB platform. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-03-14ALSA: hda/realtek - Add support headset mode for DELL WYSE AIOKailang Yang
This patch will enable WYSE AIO for Headset mode. Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-03-14ALSA: hda/realtek: merge alc_fixup_headset_jack to alc295_fixup_chromebookJaroslav Kysela
The ALC225_FIXUP_HEADSET_JACK fixup can be merged to alc295_fixup_chromebook. There are no other users for ALC225_FIXUP_HEADSET_JACK other than the chromebook hardware. Fixes: 10f5b1b85ed1 ("ALSA: hda/realtek - Fixed Headset Mic JD not stable") Cc: Kailang Yang <kailang@realtek.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-03-13ALSA: hda: hdmi - add Icelake supportJaroslav Kysela
This is just a port of the ASoC Icelake HDMI codec code to the legacy HDA driver with some cleanups. ASoC commit 019033c854a20e10f691f6cc0e897df8817d9521: "ASoC: Intel: hdac_hdmi: add Icelake support" Signed-off-by: Jaroslav Kysela <perex@perex.cz> Cc: Bard liao <bard.liao@intel.com> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-03-13ASoC: nau8810: automatic selecting BCLK in I2S master modeJohn Hsu
The driver will select correct BCLK automatically according to BCLK and FS information in I2S master mode. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-13ASoC: nau8810: fix the typo of function nameJohn Hsu
Correct the typo at the function name. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-13ASoC: nau8810: use 64-bit arithmetic instead of 32-bitJohn Hsu
Add suffix ULL to constant 256 in order to give the compiler complete information about the proper arithmetic to use. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-13ALSA: hda - add more quirks for HP Z2 G4 and HP Z240Jaroslav Kysela
Apply the HP_MIC_NO_PRESENCE fixups for the more HP Z2 G4 and HP Z240 models. Reported-by: Jeff Burrell <jeff.burrell@hp.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-03-13ALSA: hda/realtek - Fixed Headset Mic JD not stableKailang Yang
It will be lose Mic JD state when Chrome OS boot and headset was plugged. Implement of reset combo jack JD. It will show normally. Fixes: e854747d7593 ("ALSA: hda/realtek - Enable headset button support for new codec") Signed-off-by: Kailang Yang <kailang@realtek.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-03-13ALSA: hda/realtek: Enable headset MIC of Acer TravelMate X514-51T with ALC255Jian-Hong Pan
The Acer TravelMate X514-51T with ALC255 cannot detect the headset MIC until ALC255_FIXUP_ACER_HEADSET_MIC quirk applied. Although, the internal DMIC uses another module - snd_soc_skl as the driver. We still need the NID 0x1a in the quirk to enable the headset MIC. Signed-off-by: Jian-Hong Pan <jian-hong@endlessm.com> Signed-off-by: Kailang Yang <kailang@realtek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-03-13ALSA: hda/tegra: avoid build error without CONFIG_PMArnd Bergmann
The #ifdef protection around the PM functions is wrong, leading to a failed reference in some configurations: sound/pci/hda/hda_tegra.c: In function 'hda_tegra_runtime_suspend': sound/pci/hda/hda_tegra.c:273:2: error: implicit declaration of function 'hda_tegra_disable_clocks'; did you mean 'hda_tegra_enable_clocks'? [-Werror=implicit-function-declaration] Better remove the #ifdefs entirely and rely on the compiler silently dropping unused functions marked __maybe_unused. Fixes: 707e0759f2f4 ("ALSA: hda/tegra: implement runtime suspend/resume") Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-03-13ALSA: usx2y: Fix potential NULL pointer dereferenceAditya Pakki
usb_alloc_urb() can fail due to kmalloc failure and push the error upstream. Further this can cause a NULL pointer dereference in init_pipe_urbs(). This patch avoids such a scenario. Signed-off-by: Aditya Pakki <pakki001@umn.edu> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-03-13ALSA: hda: Avoid NULL pointer dereference at snd_hdac_stream_start()Mariusz Ceier
For ca0132 codec, azx_dev->stream is NULL during firmware loading. Calling snd_hdac_get_stream_stripe_ctl unconditionally causes NULL pointer dereference in that function. Fixes: 9b6f7e7a296e ("ALSA: hda: program stripe bits for controller") Signed-off-by: Mariusz Ceier <mceier+kernel@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-03-11ASoC: axi-i2s: let both capture and playback be optionalLuca Ceresoli
Both the capture and playback channels are optional in the axi_i2s IP block. Reflect this in the driver by enabling only the channel(s) that have a DMA. Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-11ASoC: ti: fix davinci_mcasp_probe dependenciesArnd Bergmann
The SND_SOC_DAVINCI_MCASP driver can use either edma or sdma as a back-end, and it takes the presence of the respective dma engine drivers in the configuration as an indication to which ones should be built. However, this is flawed in multiple ways: - With CONFIG_TI_EDMA=m and CONFIG_SND_SOC_DAVINCI_MCASP=y, is enabled as =m, and we get a link error: sound/soc/ti/davinci-mcasp.o: In function `davinci_mcasp_probe': davinci-mcasp.c:(.text+0x930): undefined reference to `edma_pcm_platform_register' - When CONFIG_SND_SOC_DAVINCI_MCASP=m has already been selected by another driver, the same link error appears even if CONFIG_TI_EDMA is disabled There are possibly other issues here, but it seems that the only reasonable solution is to always build both SND_SOC_TI_EDMA_PCM and SND_SOC_TI_SDMA_PCM as a dependency here. Both are fairly small and do not have any other compile-time dependencies, so the cost is very small, and makes the configuration stage much more consistent. Fixes: f2055e145f29 ("ASoC: ti: Merge davinci and omap directories") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-11ASoC: ams-delta: remove duplicate 'const'Arnd Bergmann
clang points out that SOC_ENUM_SINGLE_EXT_DECL() contains a 'const' modifier already, so adding another one does not make it more const: sound/soc/ti/ams-delta.c:203:14: error: duplicate 'const' declaration specifier [-Werror,-Wduplicate-decl-specifier] static const SOC_ENUM_SINGLE_EXT_DECL(ams_delta_audio_enum, ^ include/sound/soc.h:351:2: note: expanded from macro 'SOC_ENUM_SINGLE_EXT_DECL' const struct soc_enum name = SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(xtexts), xtexts) Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-11ASoC: ti: remove compat dma probingArnd Bergmann
After running into a link error: sound/soc/ti/edma-pcm.o:(.rodata+0x18): undefined reference to `edma_filter_fn' I checked all users of this, and they have new-style 'dma_slave_map' tables, so none of them should still need it. Removing the associated lines simplifies the code and avoids the build-time dependency on the respective dmaengine drivers. Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-11ASoC: stm32: i2s: use default dai nameOlivier Moysan
Use default DAI name based on dev_name function. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-11ASoC: stm32: i2s: improve channel capabilities handlingOlivier Moysan
Use alsa snd_pcm_hw_constraint_single service to manage channels restriction. This provides better status on driver limitations, to the application. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-11ASoC: stm32: i2s: change trigger tracesOlivier Moysan
Update traces to log capture/playback stream start/stop. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-11ASoC: qcom: add i2c dependency for SND_SOC_SDM845Arnd Bergmann
We must not select SND_SOC_MAX98927 unless CONFIG_I2C is also enabled: WARNING: unmet direct dependencies detected for SND_SOC_MAX98927 Depends on [n]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && I2C [=n] Selected by [y]: - SND_SOC_SDM845 [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && QCOM_APR [=y] && MFD_CROS_EC [=y] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Cheng-Yi Chiang <cychiang@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-11ASoC: davinci-mcasp: Fix clang warning without CONFIG_PMArnd Bergmann
Building with clang shows a variable that is only used by the suspend/resume functions but defined outside of their #ifdef block: sound/soc/ti/davinci-mcasp.c:48:12: error: variable 'context_regs' is not needed and will not be emitted We commonly fix these by marking the PM functions as __maybe_unused, but here that would grow the davinci_mcasp structure, so instead add another #ifdef here. Fixes: 1cc0c054f380 ("ASoC: davinci-mcasp: Convert the context save/restore to use array") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Reviewed-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-11ASoC: rsnd: src: fix compiler warningsJiada Wang
compiler complains about following declarations sound/soc/sh/rcar/src.c:174:1: warning: 'static' is not at beginning of declaration [-Wold-style-declaration] const static u32 bsdsr_table_pattern1[] = { ^~~~~ sound/soc/sh/rcar/src.c:183:1: warning: 'static' is not at beginning of declaration [-Wold-style-declaration] const static u32 bsdsr_table_pattern2[] = { ^~~~~ sound/soc/sh/rcar/src.c:192:1: warning: 'static' is not at beginning of declaration [-Wold-style-declaration] const static u32 bsisr_table[] = { ^~~~~ sound/soc/sh/rcar/src.c:201:1: warning: 'static' is not at beginning of declaration [-Wold-style-declaration] const static u32 chan288888[] = { ^~~~~ sound/soc/sh/rcar/src.c:210:1: warning: 'static' is not at beginning of declaration [-Wold-style-declaration] const static u32 chan244888[] = { ^~~~~ sound/soc/sh/rcar/src.c:219:1: warning: 'static' is not at beginning of declaration [-Wold-style-declaration] const static u32 chan222222[] = { ^~~~~ This patch moves the 'static' keyword to the front of the declaration to fix the compiler warnings Fixes: linux-next commit 7674bec4fc09 ("ASoC: rsnd: update BSDSR/BSDISR handling") Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-03-06Merge tag 'char-misc-5.1-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the big char/misc driver patch pull request for 5.1-rc1. The largest thing by far is the new habanalabs driver for their AI accelerator chip. For now it is in the drivers/misc directory but will probably move to a new directory soon along with other drivers of this type. Other than that, just the usual set of individual driver updates and fixes. There's an "odd" merge in here from the DRM tree that they asked me to do as the MEI driver is starting to interact with the i915 driver, and it needed some coordination. All of those patches have been properly acked by the relevant subsystem maintainers. All of these have been in linux-next with no reported issues, most for quite some time" * tag 'char-misc-5.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (219 commits) habanalabs: adjust Kconfig to fix build errors habanalabs: use %px instead of %p in error print habanalabs: use do_div for 64-bit divisions intel_th: gth: Fix an off-by-one in output unassigning habanalabs: fix little-endian<->cpu conversion warnings habanalabs: use NULL to initialize array of pointers habanalabs: fix little-endian<->cpu conversion warnings habanalabs: soft-reset device if context-switch fails habanalabs: print pointer using %p habanalabs: fix memory leak with CBs with unaligned size habanalabs: return correct error code on MMU mapping failure habanalabs: add comments in uapi/misc/habanalabs.h habanalabs: extend QMAN0 job timeout habanalabs: set DMA0 completion to SOB 1007 habanalabs: fix validation of WREG32 to DMA completion habanalabs: fix mmu cache registers init habanalabs: disable CPU access on timeouts habanalabs: add MMU DRAM default page mapping habanalabs: Dissociate RAZWI info from event types misc/habanalabs: adjust Kconfig to fix build errors ...
2019-02-28ALSA: usb-audio: Add quirk for MOTU MicroBook IIManuel Reinhardt
Add an entry to the quirks-table to for usb-audio to recognize the Microbook II (although it only exposes vendor interfaces). A simple boot quirk is also implemented to set up the sample rate and make sure that no audio urbs are sent before the device is ready. This patch only provides audio playback and capture at 96kHz sample rate. Notice the following shortcomings: - The sample rate is currently hardcoded to 96k although the device also supports 48k and 44.1k. - The various mixer controls of the MicroBook are not made available. - The keep-iface control should be on by default because the device shuts down whenever the altsetting is reset which is usually unwanted. (I don't know the best way to do this) - The communication format used by the MicroBook for sample rate setting and also other setup has been reverse engineered by looking at the usbmon output while running the windows driver through virtualbox. In this patch the first byte of every message is set to \0 while in the observed communications the first byte acts as a "message-counter" increasing its value with every message sent. Leaving it at \0 does not seem to affect the device. Signed-off-by: Manuel Reinhardt <manuel.rhdt@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-02-28Merge tag 'asoc-v5.1-2' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: More changes for v5.1 Another batch of changes for ASoC, no big core changes - it's mainly small fixes and improvements for individual drivers. - A big refresh and cleanup of the Samsung drivers, fixing a number of issues which allow the driver to be used with a wider range of userspaces. - Fixes for the Intel drivers to make them more standard so less likely to get bitten by core issues. - New driver for Cirrus Logic CS35L26.
2019-02-26Merge branch 'asoc-5.1' into asoc-nextMark Brown
2019-02-26Merge branch 'asoc-5.0' into asoc-linusMark Brown
2019-02-26ASoC: stm32: i2s: skip useless write in slave modeOlivier Moysan
Dummy write in capture master mode is used to gate bus clocks. This write is useless in slave mode as the clocks are not managed by slave. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-26ASoC: stm32: i2s: fix race condition in irq handlerOlivier Moysan
When snd_pcm_stop_xrun() is called in interrupt routine, substream context may have already been released. Add protection on substream context. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-26ASoC: stm32: i2s: remove useless callbackOlivier Moysan
Clocks do not need to be released on driver removal, as this is already managed before. Remove useless remove callback. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-26ASoC: stm32: i2s: fix dma configurationOlivier Moysan
DMA configuration is not balanced on start/stop. Move DMA configuration to trigger callback. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-26ASoC: stm32: i2s: fix stream count managementOlivier Moysan
Move counter handling to trigger start section to manage multiple start/stop events. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-26ASoC: stm32: i2s: fix 16 bit format supportOlivier Moysan
I2S supports 16 bits data in 32 channel length. However the expected driver behavior, is to set channel length to 16 bits when data format is 16 bits. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-26ASoC: stm32: i2s: fix IRQ clearingOlivier Moysan
Because of regmap cache, interrupts may not be cleared as expected. Declare IFCR register as write only and make writings to IFCR register unconditional. Signed-off-by: Olivier Moysan <olivier.moysan@st.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-26Merge branch 'for-5.0' of ↵Mark Brown
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-5.1
2019-02-26ASoC: qcom: Kconfig: fix dependency for sdm845Cheng-Yi Chiang
SND_SOC_CROS_EC_CODEC depends on MFD_CROS_EC. Add that dependency to SND_SOC_SDM845 to fix unmet direct dependencies warning. Fixes: 74c6ecf4194e (ASoC: qcom: Kconfig: select dmic for sdm845) Signed-off-by: Cheng-Yi Chiang <cychiang@chromium.org> Reported-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-26ASoC: Intel: Boards: Add Maxim98373 supportJenny TC
This patch enables the reuse of kbl_da7219_max98927 machine driver to support max98373. The same machine driver is modified for cases where one amplifier is swapped out with another. Most of the changes are about renaming the codec and codec_dai names, with minor differences due to support for 24 bits in one case and 16 in the other. Signed-off-by: Jenny TC <jenny.tc@intel.com> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-26ASoC: rsnd: gen: fix SSI9 4/5/6/7 busif related register addressJiada Wang
Currently each SSI unit 's busif mode/adinr/dalign address is registered by: (in busif4 case) RSND_GEN_M_REG(SSI_BUSIF4_MODE, 0x500, 0x80) RSND_GEN_M_REG(SSI_BUSIF4_ADINR,0x504, 0x80) RSND_GEN_M_REG(SSI_BUSIF4_DALIGN, 0x508, 0x80) But according to user manual 41.1.4 Register Configuration ssi9 4/5/6/7 busif mode/adinr/dalign register address ( SSI9-[4/5/6/7]_BUSIF_[MODE/ADINR/DALIGN] ) are out of this rule. This patch registers ssi9 4/5/6/7 mode/adinr/dalign register as single register, and access these registers in case of SSI9 BUSIF 4/5/6/7. Fixes: commit 8c9d75033340 ("ASoC: rsnd: ssiu: Support BUSIF other than BUSIF0") Signed-off-by: Jiada Wang <jiada_wang@mentor.com> Signed-off-by: Timo Wischer <twischer@de.adit-jv.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-26ALSA: firewire-motu: fix construction of PCM frame for capture directionTakashi Sakamoto
In data blocks of common isochronous packet for MOTU devices, PCM frames are multiplexed in a shape of '24 bit * 4 Audio Pack', described in IEC 61883-6. The frames are not aligned to quadlet. For capture PCM substream, ALSA firewire-motu driver constructs PCM frames by reading data blocks byte-by-byte. However this operation includes bug for lower byte of the PCM sample. This brings invalid content of the PCM samples. This commit fixes the bug. Reported-by: Peter Sjöberg <autopeter@gmail.com> Cc: <stable@vger.kernel.org> # v4.12+ Fixes: 4641c9394010 ("ALSA: firewire-motu: add MOTU specific protocol layer") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-02-26ALSA: bebob: use more identical mod_alias for Saffire Pro 10 I/O against ↵Takashi Sakamoto
Liquid Saffire 56 ALSA bebob driver has an entry for Focusrite Saffire Pro 10 I/O. The entry matches vendor_id in root directory and model_id in unit directory of configuration ROM for IEEE 1394 bus. On the other hand, configuration ROM of Focusrite Liquid Saffire 56 has the same vendor_id and model_id. This device is an application of TCAT Dice (TCD2220 a.k.a Dice Jr.) however ALSA bebob driver can be bound to it randomly instead of ALSA dice driver. At present, drivers in ALSA firewire stack can not handle this situation appropriately. This commit uses more identical mod_alias for Focusrite Saffire Pro 10 I/O in ALSA bebob driver. $ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 042a829d bus_info_length 4, crc_length 42, crc 33437 404 31333934 bus_name "1394" 408 f0649222 irmc 1, cmc 1, isc 1, bmc 1, pmc 0, cyc_clk_acc 100, max_rec 9 (1024), max_rom 2, gen 2, spd 2 (S400) 40c 00130e01 company_id 00130e | 410 000606e0 device_id 01000606e0 | EUI-64 00130e01000606e0 root directory ----------------------------------------------------------------- 414 0009d31c directory_length 9, crc 54044 418 04000014 hardware version 41c 0c0083c0 node capabilities per IEEE 1394 420 0300130e vendor 424 81000012 --> descriptor leaf at 46c 428 17000006 model 42c 81000016 --> descriptor leaf at 484 430 130120c2 version 434 d1000002 --> unit directory at 43c 438 d4000006 --> dependent info directory at 450 unit directory at 43c ----------------------------------------------------------------- 43c 0004707c directory_length 4, crc 28796 440 1200a02d specifier id: 1394 TA 444 13010001 version: AV/C 448 17000006 model 44c 81000013 --> descriptor leaf at 498 dependent info directory at 450 ----------------------------------------------------------------- 450 000637c7 directory_length 6, crc 14279 454 120007f5 specifier id 458 13000001 version 45c 3affffc7 (immediate value) 460 3b100000 (immediate value) 464 3cffffc7 (immediate value) 468 3d600000 (immediate value) descriptor leaf at 46c ----------------------------------------------------------------- 46c 00056f3b leaf_length 5, crc 28475 470 00000000 textual descriptor 474 00000000 minimal ASCII 478 466f6375 "Focu" 47c 73726974 "srit" 480 65000000 "e" descriptor leaf at 484 ----------------------------------------------------------------- 484 0004a165 leaf_length 4, crc 41317 488 00000000 textual descriptor 48c 00000000 minimal ASCII 490 50726f31 "Pro1" 494 30494f00 "0IO" descriptor leaf at 498 ----------------------------------------------------------------- 498 0004a165 leaf_length 4, crc 41317 49c 00000000 textual descriptor 4a0 00000000 minimal ASCII 4a4 50726f31 "Pro1" 4a8 30494f00 "0IO" $ python2 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 040442e4 bus_info_length 4, crc_length 4, crc 17124 404 31333934 bus_name "1394" 408 e0ff8112 irmc 1, cmc 1, isc 1, bmc 0, pmc 0, cyc_clk_acc 255, max_rec 8 (512), max_rom 1, gen 1, spd 2 (S400) 40c 00130e04 company_id 00130e | 410 018001e9 device_id 04018001e9 | EUI-64 00130e04018001e9 root directory ----------------------------------------------------------------- 414 00065612 directory_length 6, crc 22034 418 0300130e vendor 41c 8100000a --> descriptor leaf at 444 420 17000006 model 424 8100000e --> descriptor leaf at 45c 428 0c0087c0 node capabilities per IEEE 1394 42c d1000001 --> unit directory at 430 unit directory at 430 ----------------------------------------------------------------- 430 000418a0 directory_length 4, crc 6304 434 1200130e specifier id 438 13000001 version 43c 17000006 model 440 8100000f --> descriptor leaf at 47c descriptor leaf at 444 ----------------------------------------------------------------- 444 00056f3b leaf_length 5, crc 28475 448 00000000 textual descriptor 44c 00000000 minimal ASCII 450 466f6375 "Focu" 454 73726974 "srit" 458 65000000 "e" descriptor leaf at 45c ----------------------------------------------------------------- 45c 000762c6 leaf_length 7, crc 25286 460 00000000 textual descriptor 464 00000000 minimal ASCII 468 4c495155 "LIQU" 46c 49445f53 "ID_S" 470 41464649 "AFFI" 474 52455f35 "RE_5" 478 36000000 "6" descriptor leaf at 47c ----------------------------------------------------------------- 47c 000762c6 leaf_length 7, crc 25286 480 00000000 textual descriptor 484 00000000 minimal ASCII 488 4c495155 "LIQU" 48c 49445f53 "ID_S" 490 41464649 "AFFI" 494 52455f35 "RE_5" 498 36000000 "6" Cc: <stable@vger.kernel.org> # v3.16+ Fixes: 25784ec2d034 ("ALSA: bebob: Add support for Focusrite Saffire/SaffirePro series") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-02-25ALSA: hda: Extend i915 component bind timeoutTakashi Iwai
I set 10 seconds for the timeout of the i915 audio component binding with a hope that recent machines are fast enough to handle all probe tasks in that period, but I was too optimistic. The binding may take longer than that, and this caused a problem on the machine with both audio and graphics driver modules loaded in parallel, as Paul Menzel experienced. This problem haven't hit so often just because the KMS driver is loaded in initrd on most machines. As a simple workaround, extend the timeout to 60 seconds. Fixes: f9b54e1961c7 ("ALSA: hda/i915: Allow delayed i915 audio component binding") Reported-by: Paul Menzel <pmenzel+alsa-devel@molgen.mpg.de> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-02-22ASoC: wm_adsp: Improve logging messagesCharles Keepax
As the compressed stream implementation has acquired support for multiple DAI links and compressed streams it has become harder to interpret messages in the kernel log. Add additional macros to include the compressed DAI name in the log messages, allowing different streams to be easily disambiguated. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-22ASoC: wm_adsp: Add support for multiple compressed buffersStuart Henderson
Currently, only a single compressed stream is supported per firmware. Add support for multiple compressed streams on a single firmware, this allows additional features like completely independent trigger words or separate debug capture streams to be implemented. Signed-off-by: Stuart Henderson <stuarth@opensource.cirrus.com> Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-22ASoC: wm_adsp: Refactor compress stream initialisationCharles Keepax
Make the code slightly clearer and prepare things for the addition of multiple compressed streams on a single DSP core. Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-02-22ASoC: wm_adsp: Reorder some functions for improved clarityCharles Keepax
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2025-03-31 16:55:39 +0000