summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2017-04-24ASoC: bytcr_rt5640: Allow quirk set via module optionTakashi Iwai
The bytcr-rt5640 driver has a few quirk setups depending on the board, where the quirk value is set by DMI matching. When you have a new device to add the support, you often experience to try the different quirk by trial-and-error. Or, you may have a development model that still has no proper DMI string. In either case, you'd need to compile the driver at each time. This patch introduces a module option to override the quirk value on the fly. User can boot like snd-soc-sst-bytcr-rt5640.quirk=0x4004 to override the default value without recompilation. It's a raw value, so user needs to check the source code for the meaning of each bit. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-24ASoC: Call snd_soc_set_dmi_name() unconditionallyTakashi Iwai
Since recently UCM can pick up a configuration specific to the board via card longname field, and we introduced a helper function snd_soc_set_dmi_name() for that. So far, it was used only in one place (sound/soc/intel/boards/broadwell.c), but it should be more widely applied. This patch puts a big hammer for that: it lets snd_soc_register_card() calling snd_soc_set_dmi_name() unconditionally, so that all x86 devices get the better longname string. This would have no impact for other systems without DMI support, as snd_soc_set_dmi_name() is no-op on them. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-24ASoC: Provide a dummy wrapper of snd_soc_set_dmi_name()Takashi Iwai
For systems without DMI, it makes no sense to have the code. Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-24ASoC: imx-wm8962: Remove global variablesFabio Estevam
Currently the following variables are global: - card_priv, sample_rate and sample_format ,which is not a good idea as it prevents the usage of multiple instances. Make sample_rate and sample_format part of the imx_priv structure and allocate imx_priv via the standard devm_kzalloc() mechanism inside the probe function. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-24Merge branch 'topic/hda-dual-codecs' into for-nextTakashi Iwai
2017-04-21ASoC: samsung: Add Odroid ASoC machine driverSylwester Nawrocki
This dedicated driver allows to support SoC specific clock settings and helps to ensure proper number of channels gets negotiated in multicodec system configurations. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-21ASoC: qcom: move clock names into LPASS variant structLinus Walleij
The clock names for the two supported codecs are either "mi2s-*" name variants generated by code. This naming scheme does not work for platforms like MSM8660 which has I2S channels named CODEC_I2S_SPKR (rather than just "MI2S tertiary" and other repetitive names) and consequently have clocks named "codec-i2s-spkr-osr-clk" and similar. Skip the runtime generation of clock names and replace it with name lookup tables encoded into the variant data. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-21ASoC: cs35l35: Allow user to configure IMON SCALECharles Keepax
On the chip the IMON signal is a full 24-bits however normally only some of the bits will be sent over the bus. The chip provides a field to select which bits of the IMON will be sent back, this is the only feedback signal that has this feature. Add an additional entry to the cirrus,imon device tree property to allow the IMON scale parameter to be passed. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Brian Austin <brian.austin@cirrus.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-21ASoC: Intel: Skylake: Fix a couple user after free bugsDan Carpenter
We need to use the _safe() version of list_for_each_entry() here because of the kfree(modules). Fixes: b8c722ddd548 ("ASoC: Intel: Skylake: Add support for deferred DSP module bind") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-21ASoC: fsl_asrc_dma: use correct direction enum typeStefan Agner
The direction argument is of type enum dma_transfer_direction, and not enum dma_data_direction. The enumeration values are the same so this did not had an effect in practise. Signed-off-by: Stefan Agner <stefan@agner.ch> Acked-by: Nicolin Chen <nicoleotsuka@gmail.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-21ASoC: mediatek: add I2C dependency for CS42XX8Arnd Bergmann
We should not select drivers that depend on I2C when that is disabled, as it results in a build error: warning: (SND_SOC_MT2701_WM8960) selects SND_SOC_WM8960 which has unmet direct dependencies (SOUND && !M68K && !UML && SND && SND_SOC && I2C) sound/soc/codecs/wm8960.c:1469:1: error: data definition has no type or storage class [-Werror] sound/soc/codecs/wm8960.c:1469:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int] Fixes: 8625c1dbd876 ("ASoC: mediatek: Add mt2701-wm8960 machine driver") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Ryder Lee <ryder.lee@mediatek.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-21ASoC: Intel: Skylake: Uninitialized variable in probe_codec()Dan Carpenter
My static checker complains that if snd_hdac_bus_get_response() returns -EIO then "res" is uninitialized. Fix this by initializing it to -1 so that the error is handled correctly. Fixes: d8c2dab8381d ("ASoC: Intel: Add Skylake HDA audio driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-21ASoC: rsnd: Fix possible NULL pointer dereferenceMarek Vasut
25165f79adc76b812bfb4d8f2ab120aafb28d0e6 ("ASoC: rsnd: enable clock-frequency for both 44.1kHz/48kHz") supports both 44.1kHz/48kHz clock-frequency settings for ADG which will be used for AUDIO_OLKOUTn. But some board doesn't need it, thus, it is not mandatory. But, above patch didn't care about the case of "clock-frequency" DT property was not present. This patch ignores ADG settings if AUDIO_OLKOUTn was not used. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> [Kuninori: tidyup not to break non AUDIO_OLKOUTn case] Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-21ASoC: rsnd: fix semicolon.cocci warningskbuild test robot
sound/soc/sh/rcar/adg.c:462:54-55: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-21ALSA: hda - Use a helper function for renaming kctl namesTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-21ALSA: hda - Support Gigabyte Gaming board with dual Realtek codecsTakashi Iwai
This patch adds some workarounds to make Gigabyte GA-AX370 Gaming 5 board working without the conflicts of kctls, etc. In general, the dual codec configs result in the conflicts of the following stuff: - Master controls - Capture controls - Analog loopback controls In addition, the auto-mute and the auto-mic can't work well among multiple codecs. The current "solution" is to disable all these features, and use UCM for a better PulseAudio management. For a dedicated UCM profile, the patch overrides the card longname so that the system an get a unique profile path. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195305 Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-21ALSA: hda - Fix headset microphone detection for ASUS N551 and N751Mikhail Paulyshka
Headset microphone does not work out of the box on ASUS Nx51 laptops. This patch fixes it. Patch tested on Asus N551 laptop. Asus N751 part is not tested, but according to [1] this laptop uses the same audiosystem. 1. https://bugzilla.kernel.org/show_bug.cgi?id=117781 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195437 Signed-off-by: Mikhail Paulyshka <me@mixaill.tk> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-20ALSA: fireface: obsolete usage of ktime_set() for zero assignmentTakashi Sakamoto
In development period for Linux v4.10, ktime_t became an alias of s64, instead of union. I forgot it. We can just assign zero, instead of usage of ktime_set(0, 0). Fixes: 19174295788 ("ALSA: fireface: add transaction support") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-20ALSA: firewire-motu: mark trace helpers as __maybe_unusedArnd Bergmann
Two functions were introduced for the purpose of tracing but cause warnings when tracing is disabled: sound/firewire/motu/amdtp-motu.c:284:13: error: 'copy_message' defined but not used [-Werror=unused-function] static void copy_message(u64 *frames, __be32 *buffer, unsigned int data_blocks, sound/firewire/motu/amdtp-motu.c:271:13: error: 'copy_sph' defined but not used [-Werror=unused-function] static void copy_sph(u32 *frames, __be32 *buffer, unsigned int data_blocks, Marking them as __maybe_unused will do the right thing here. Fixes: 17909c1b3058 ("ALSA: firewire-motu: add tracepoints for SPH in IEC 61883-1 fashion") Fixes: c6b0b9e65f09 ("ALSA: firewire-motu: add tracepoints for messages for unique protocol") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-19ASoC: rsnd: enable clock-frequency for both 44.1kHz/48kHzKuninori Morimoto
Current clock-frequency allows only 1 clock, but ADG can handle both 44.1kHz/48kHz base clocks. This patch enables these. On Salvator-X board, AUDIO_CLKOUT which is generated by ADG is connected to ak4613 MCKI, and it should be synchronized with LRCK. Thus, we need both 44.1kHz/48kHz base clock-frequency. Otherwise, either one sounds strange in high frequency sound. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-19ASoC: rsnd: rsnd_mod_make_sure() is not under DEBUGKuninori Morimoto
rsnd_mod_make_sure() will be used any situation, thus, under DEBUG is not realistic. This patch move it to non DEBUG area Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-19ASoC: ak4613: use snd_soc_update_bits() to avoid Reserve bit on I/O CTRLKuninori Morimoto
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-19ALSA: hda - Add HP ZBook 15u G3 Conexant CX20724 GPIO mute ledsJerónimo Borque
The HP ZBook 15u G3 has a Conexant CX20724 with mute led on GPIO1 and mic mute led on GPIO2. Adding CXT_FIXUP_MUTE_LED_GPIO inspired on patch_realtek's one. Signed-off-by: Jerónimo Borque <jeronimo@borque.com.ar> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-18ASoC: cs35l35: Correct some register defaultsCharles Keepax
Correct some minor errors in the register defaults. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Brian Austin <brian.austin@cirrus.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-18ASoC: topology: use j for internal loop counterColin Ian King
Currently variable i is being for 2 nested for loops. Fix this by using integer loop counter j for the inside for loop. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-18ASoC: codecs: rt5670: add Thinkpad Tablet 10 quirkNicole Faerber
The Thinkpad Tablet tablet has a similar audio setup as the Intel Braswell platform. A quirk is needed to detect the platform and setup the platform data properly: Manufacturer: LENOVO Product Name: 20C1CTO1WW Version: ThinkPad 10 Manufacturer: LENOVO Product Name: 20C3001VHH Version: ThinkPad 10 Manufacturer: LENOVO Product Name: 20C10024GE Version: ThinkPad Tablet B Manufacturer: LENOVO Product Name: 20359 Version: Lenovo Miix 2 10 Signed-off-by: Nicole Faerber <nicole.faerber@id3p.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-18ASoC: Intel: Atom: update Thinkpad 10 quirkPierre-Louis Bossart
There are multiple skews of the same Lenovo audio hardware based on the Realtek RT5670 codec. Manufacturer: LENOVO Product Name: 20C1CTO1WW Version: ThinkPad 10 Manufacturer: LENOVO Product Name: 20C3001VHH Version: ThinkPad 10 Manufacturer: LENOVO Product Name: 20C10024GE Version: ThinkPad Tablet B Manufacturer: LENOVO Product Name: 20359 Version: Lenovo Miix 2 10 For all these devices, the same quirk is used to force the machine driver to be based on RT5670 instead of RT5640 as indicated by the BIOS. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96691 Tested-by: Nicole Faerber <nicole.faerber@dpin.de> Tested-by: Viacheslav Ostroukh <v.dev@ostroukh.me> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-18ASoC: nau8540: fix tab conversion problemJohn Hsu
Fix the tab converting to space problem. Signed-off-by: John Hsu <KCHSU0@nuvoton.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-17ALSA: usb-audio: replace /proc/bus/usb by /dev/bus/usbMauro Carvalho Chehab
The /proc/bus/usb devices don't exist anymore, since when we got rid of usbfs. Those devices are now seen at /dev/bus/usb. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-14ASoC: rt5514: Unconfuse the rt5514 at probe / resume timeDouglas Anderson
The rt5514 can get confused and incorrectly detect a start bit if the SCL/SDA lines happen to both go low and then high again. This situation has been seen to happen at reboot time and is also theoretically possible during suspend/resume if the rt5514 keeps power but we shut down the i2c connection. When this happens the rt5514 is confused about the state of the i2c bus and won't recognize its own address. That will lead to the rt5514 incorrectly NAKing the first transfer. A single i2c transfer to any address should be enough to get the rt5514 out of this funky state. It is currently believed that this problem should be fixed in the rt5514 driver itself because it seems that the i2c controller in the rt5514 is easily confused. Most i2c devices wouldn't detect a start bit in this case. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-14ASoC: rt5514: Avoid relying on uninitialized "val" valueDouglas Anderson
In rt5514_i2c_probe() if the regmap_read(RT5514_VENDOR_ID2) fails then "val" may be left as uninitialized. Current code relies on "val" not being RT5514_DEVICE_ID, but that's potentially unsafe. Let's check for errors from regmap_read() and also explicitly init the value do we're not passing a possibly uninitialized int to printk. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-14ASoC: rt5514: Mark rt5514_i2c_driver as staticDouglas Anderson
There's no reason for rt5514_i2c_driver to be non-static. Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-14ALSA: firewire-tascam: support drain callback for MIDI playback substreamTakashi Sakamoto
ALSA driver for TASCAM FireWire series transfers MIDI messages in system workqueue. In current design of the driver, applications should wait for sequence of transmission when they close ALSA rawmidi character devices. However, when considering design of rawmidi interface, it's preferable to wait in drain ioctl. This commit adds support for the drain ioctl to wait for the end of the transmission. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-14ALSA: firewire-tascam: move message parameters for async midi portTakashi Sakamoto
Units on TASCAM FireWire series handle MIDI messages with support for running status. Drivers for the series should remember current running status and transfer valid MIDI messages. For this purpose, current ALSA driver for the series has some members in its top-level structure. This is due to better abstraction of async midi port. Nowadays, the abstraction was localized just for the driver. This commit moves the members to structure for async midi port. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-14ALSA: firewire-tascam: initialize parameters at open of rawmidi character ↵Takashi Sakamoto
devices In current design of ALSA driver for TASCAM FireWire series, initialization of members in asymc midi port structure is done at device probing. Some of the members should be initialized every time to use rawmidi devices because they're changed in sequence of transmission for MIDI messages. This commit adds a new function to initialize them. Invariant parameters during object lifetime are kept as is. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-14ALSA: firewire-tascam: use fixed-length array for message cache to async ↵Takashi Sakamoto
midi port ALSA driver for TASCAM FireWire series internally allocates 4 byte buffer for asynchronous transaction to transfer MIDI messages. However, the buffer can be allocated with memory object of parent structure. This commit adds 4 byte array as a member of the structure and obsoletes the redundant allocation. This is deallocated with memory object of parent structure. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-14ALSA: firewire-tascam: use the same address for asynchronous transaction for ↵Takashi Sakamoto
MIDI message Units on TASCAM FireWire series receive MIDI messages by asynchronous transactions on IEEE 1394 bus. Although the transaction is sent to a certain register, current ALSA driver for this series has a redundant design. This commit use the same address for the transaction. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-14ALSA: firewire-tascam: send fixed-length transaction for async midi portTakashi Sakamoto
TASCAM FireWire series uses asynchronous transactions with fixed length payload for MIDI messaging. On the other hand, ALSA driver for the series has a redundant design to handle different length of payload. This commit removes the redundant abstraction. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-14ALSA: firewire-tascam: remove callback function from async midi portTakashi Sakamoto
As a result of localization of async midi port, ALSA driver for TASCAM FireWire series can call helper function directly instead of callback registration. This commit removes the redundant design. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-14ALSA: firewire-lib/firewire-tascam: localize async midi portTakashi Sakamoto
In Linux kernel 4.4, firewire-lib got a feature called as 'async midi port' for transmission of MIDI message via IEEE 1394 asynchronous communication, however actual consumer of this feature is ALSA driver for TASCAM FireWire series only. When adding this feature, I assumed that ALSA driver for Digi00x might also be a consumer, actually it's not. This commit moves the feature from firewire-lib to firewire-tascam module. Two minor kernel APIs are removed. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-14Merge branch 'for-linus' into for-nextTakashi Iwai
Back-merge to prepare for applying more FireWire updates.
2017-04-14ALSA: usb-line6: constify snd_kcontrol_new strucutre arrayTakashi Sakamoto
In kernel APIs of ALSA control interface, drivers can create a control element set by a call of snd_ctl_new1() with a template. This template is known to have const qualifier in general cases. This commit adds the qualifier to template array, for safer program and runtime. Application of this change moves the symbol from .data section to .rodata section. Cc: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-14ALSA: firewire-lib: fix inappropriate assignment between signed/unsigned typeTakashi Sakamoto
An abstraction of asynchronous transaction for transmission of MIDI messages was introduced in Linux v4.4. Each driver can utilize this abstraction to transfer MIDI messages via fixed-length payload of transaction to a certain unit address. Filling payload of the transaction is done by callback. In this callback, each driver can return negative error code, however current implementation assigns the return value to unsigned variable. This commit changes type of the variable to fix the bug. Reported-by: Julia Lawall <Julia.Lawall@lip6.fr> Cc: <stable@vger.kernel.org> # 4.4+ Fixes: 585d7cba5e1f ("ALSA: firewire-lib: add helper functions for asynchronous transactions to transfer MIDI messages") Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-13ALSA: seq: Don't break snd_use_lock_sync() loop by timeoutTakashi Iwai
The snd_use_lock_sync() (thus its implementation snd_use_lock_sync_helper()) has the 5 seconds timeout to break out of the sync loop. It was introduced from the beginning, just to be "safer", in terms of avoiding the stupid bugs. However, as Ben Hutchings suggested, this timeout rather introduces a potential leak or use-after-free that was apparently fixed by the commit 2d7d54002e39 ("ALSA: seq: Fix race during FIFO resize"): for example, snd_seq_fifo_event_in() -> snd_seq_event_dup() -> copy_from_user() could block for a long time, and snd_use_lock_sync() goes timeout and still leaves the cell at releasing the pool. For fixing such a problem, we remove the break by the timeout while still keeping the warning. Suggested-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-13ALSA: hda: Move common haswell init to a helperAnder Conselvan De Oliveira
Geminilake vendor nid is different from other Skylake variants, but rest of the initialization code is same. So a variable is added in hdmi_spec to store the platform specific vendor nid and move the initialization code to a helper function to be used by both platform specific init. Fixes: 126cfa2f5e15 ("ALSA: hda: Add Geminilake HDMI codec ID") Signed-off-by: Ander Conselvan De Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com> Signed-off-by: Jaikrishna Nemallapudi <jaikrishnax.nemallapudi@intel.com> Cc: Senthilnathan Veppur <senthilnathanx.veppur@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-12ASoC: Intel: Skylake: Add support for deferred DSP module bindJeeja KP
Module at the end of DSP pipeline that needs to be connected to a module in another pipeline are represented as a PGA(leaf node) and in PGA event handler these modules are bound/unbounded. Modules other than PGA leaf can be connected directly or via switch to a module in another pipeline. Example: reference path. To support the deferred DSP module bind, following changes are done: o When the path is enabled, the destination module that needs to be bound may not be initialized. If the module is not initialized, add these modules in a deferred bind list. o When the destination module is initialized, check for these modules in deferred bind list. If found, bind them. o When the destination module is deleted, Unbind the modules. o When the source module is deleted, remove the entry from the deferred bind list. Signed-off-by: Jeeja KP <jeeja.kp@intel.com> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-12ASoC: fsl_esai: Remove unneeded definitionFabio Estevam
There is no need for defining FSL_ESAI_RATES locally as the standard SNDRV_PCM_RATE_8000_192000 definition can be used instead. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-12ALSA: line6: constify snd_kcontrol_new structuresBhumika Goyal
Declare snd_kcontrol_new strcutures as const as they are only passed as an argument to the function snd_ctl_new1. This argument is of type const, so snd_kcontrol_new structures having this property can be made const too. Done using Coccinelle: @r disable optional_qualifier@ identifier x; position p; @@ static struct snd_kcontrol_new x@p={...}; @ok@ identifier r.x; position p; @@ snd_ctl_new1(&x@p,...) @bad@ position p != {r.p,ok.p}; identifier r.x; @@ x@p @depends on !bad disable optional_qualifier@ identifier r.x; @@ +const struct snd_kcontrol_new x; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-12ALSA: usb-audio: constify snd_kcontrol_new structuresBhumika Goyal
Declare snd_kcontrol_new strcutures as const as they are only passed as an argument to the function snd_ctl_new1. This argument is of type const, so snd_kcontrol_new structures having this property can be made const too. Done using Coccinelle: @r disable optional_qualifier@ identifier x; position p; @@ static struct snd_kcontrol_new x@p={...}; @ok@ identifier r.x; position p; @@ snd_ctl_new1(&x@p,...) @bad@ position p != {r.p,ok.p}; identifier r.x; @@ x@p @depends on !bad disable optional_qualifier@ identifier r.x; @@ +const struct snd_kcontrol_new x; Signed-off-by: Bhumika Goyal <bhumirks@gmail.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-12ALSA: firewire-lib: cache maximum length of payload to reduce function callsTakashi Sakamoto
During packet streaming, maximum length of payload for isochronous packet is invariable, therefore no need to recalculate. Current ALSA IEC 61883-1/6 engine calls a function to calculate it 8,000 or more times per second for incoming packet processing. This commit adds a member to have maximum length of payload into 'struct amdtp_stream', to reduces the function calls. At first callback from isochronous context, the length is calculated and stored for later processing. Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
generated by cgit (git 2.34.1) at 2024-06-07 22:56:25 +0000