summaryrefslogtreecommitdiff
path: root/sound
AgeCommit message (Collapse)Author
2019-11-18ASoC: wm_adsp: Expose mixer control APILi Xu
Expose mixer control API for reading and writing controls from the kernel. This API can be used by ALSA kernel drivers with ADSP support to read and write firmware-defined memory regions. Signed-off-by: Li Xu <li.xu@cirrus.com> Signed-off-by: David Rhodes <david.rhodes@cirrus.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/1573847653-17094-2-git-send-email-david.rhodes@cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-18ASoC: tlv320aic31xx: configure output common-mode voltageLucas Stach
The tlv320aic31xx devices allow to adjust the output common-mode voltage for best analog performance. The datasheet states that the common mode voltage should be set to be <= AVDD/2. This changes allows to configure the output common-mode voltage via a DT property. If the property is absent the voltage is automatically chosen as the highest voltage below/equal to AVDD/2. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Link: https://lore.kernel.org/r/20191118151207.28576-1-l.stach@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-18ASoC: SOF: Intel: Fix CFL and CML FW nocodec binary names.Liam Girdwood
The manifest information is different between CNL, CML and CFL platforms hence we need to load different files. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111222901.19892-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-18ASoC: SOF: Intel: Fix build breakMark Brown
Commit 130d3e9077 (Fix CFL and CML FW nocodec binary names.) broke the build in some configurations as it depends on changes in the development branch, revert it. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-18ASoC: pcm3168a: Add support for optional RST gpio handlingPeter Ujfalusi
In case the RST line is connected to a GPIO line it needs to be pulled high when the driver probes to be able to use the codec. Add support also for cases when more than one codec is is controlled by the same GPIO line by requesting the gpio with GPIOD_FLAGS_BIT_NONEXCLUSIVE. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191113124734.27984-3-peter.ujfalusi@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-18ASoC: wm5100: add missed pm_runtime_disableChuhong Yuan
The driver forgets to call pm_runtime_disable in remove and probe failure. Add the calls to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20191118073707.28298-1-hslester96@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-18ASoC: wm2200: add missed operations in remove and probe failureChuhong Yuan
This driver misses calls to pm_runtime_disable and regulator_bulk_disable in remove and a call to free_irq in probe failure. Add the calls to fix it. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Link: https://lore.kernel.org/r/20191118073633.28237-1-hslester96@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-18ASoC: qcom: q6asm-dai: add support to flac decoderVinod Koul
Qualcomm DSPs also support the flac decoder, so add support for FLAC decoder and convert the snd_dec_flac params to qdsp format. Co-developed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20191115102705.649976-4-vkoul@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-18ASoC: qcom: q6asm: add support to flac configSrinivas Kandagatla
Qualcomm DSPs expect flac config to be set for flac decoders, so add the API to program the flac config to the DSP Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20191115102705.649976-3-vkoul@kernel.org Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-18ASoC: rt5677: rt5677_check_hotword() can be statickbuild test robot
Fixes: 21c00e5df439 ("ASoC: rt5677: Enable jack detect while DSP is running") Signed-off-by: kbuild test robot <lkp@intel.com> Link: https://lore.kernel.org/r/20191114153304.n4pyix7qadu76tx4@4978f4969bb8 Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-18ASoC: rt5682: fix the charge pump capacitor dischargesShuming Fan
Due to switching the HV to LV mode while stopping playback, the charge pump capacitor will be discharged to the source of the pump circuit. Therefore, this patch removed the event control. Signed-off-by: Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20191118091624.18699-1-shumingf@realtek.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-15ALSA: hda - remove forced polling workaround for CFL and CNLKai Vehmanen
Remove the workarounds added in commit fa763f1b2858 ("ALSA: hda - Force polling mode on CNL for fixing codec communication") and commit a8d7bde23e71 ("ALSA: hda - Force polling mode on CFL for fixing codec communication"). The workarounds are no longer needed after the more generic change done in commit 2756d9143aa5 ("ALSA: hda - Fix intermittent CORB/RIRB stall on Intel chips"). This change applies to a larger set of hardware and covers CFL and CNL as well. Similar change was already done to SOF DSP HDA driver with no regressions detected. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20191115124449.20512-4-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-15ALSA: hda: hdmi - remove redundant code commentsKai Vehmanen
Remove unnecessary comments related to pin mapping on Intel platforms. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20191115124449.20512-3-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-15ALSA: hda: hdmi - fix port numbering for ICL and TGL platformsKai Vehmanen
Semantics of port#0 differ between ICL and TGL: ICL port#0 -> never used for HDAudio ICL port#1 -> should be mapped to first pin (0x04) TGL port#0 -> typically not used, but HW has the support, so should be mapped to first pin (0x04) TGL port#1 -> should be mapped to 2nd pin (0x06) Refactor the port mapping logic to allow to take the above differences into account. Fixes issues with HDAudio on some TGL platforms. Co-developed-by: Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20191115124449.20512-2-kai.vehmanen@linux.intel.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-15ASoC: ti: davinci-mcasp: Use dma_request_chan() directly for channel requestPeter Ujfalusi
dma_request_slave_channel_reason() is: #define dma_request_slave_channel_reason(dev, name) \ dma_request_chan(dev, name) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191113095445.3211-3-peter.ujfalusi@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-15ASoC: dmaengine: Use dma_request_chan() directly for channel requestPeter Ujfalusi
dma_request_slave_channel_reason() is: #define dma_request_slave_channel_reason(dev, name) \ dma_request_chan(dev, name) Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Link: https://lore.kernel.org/r/20191113095445.3211-2-peter.ujfalusi@ti.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-15ASoC: soc-core: care card_probed at soc_cleanup_card_resources()Kuninori Morimoto
soc_cleanup_card_resources() will call card->remove(), but it should be called if card->probe() or card->late_probe() are called. snd_soc_bind_card() might be error before calling card->probe() / card->late_probe(). In that time, card->remove() will be called. This patch adds card_probed parameter to judge it. Fixes: bfce78a559655 ("ASoC: soc-core: tidyup soc_init_dai_link()") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Jon Hunter <jonathanh@nvidia.com> Link: https://lore.kernel.org/r/87o8xg4ltr.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-15ASoC: soc-core: move snd_soc_unbind_card() next to snd_soc_bind_card()Kuninori Morimoto
To makes code readable, this patch moves snd_soc_unbind_card() next to snd_soc_bind_card(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87pnhw4lu5.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-15ASoC: soc-core: call snd_soc_dapm_shutdown() at soc_cleanup_card_resources()Kuninori Morimoto
It is easy to read code if it is cleanly using paired function/naming, like start <-> stop, register <-> unregister, etc, etc. But, current ALSA SoC code is very random, unbalance, not paired, etc. It is easy to create bug at the such code, and it will be difficult to debug. snd_soc_bind_card() is calling snd_soc_dapm_init() for both card and component. Let's call paired snd_soc_dapm_shutdown() at paired soc_cleanup_card_resources(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87r22c4lub.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-15ASoC: tas2770: clean up an indentation issueColin Ian King
There is a block that is indented too deeply, remove the extraneous tabs. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20191112190218.282337-1-colin.king@canonical.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-15ASoC: rt5645: Fixed typo for buddy jack support.Jacob Rasmussen
Had a typo in e7cfd867fd98 that resulted in buddy jack support not being fixed. Fixes: e7cfd867fd98 ("ASoC: rt5645: Fixed buddy jack support.") Signed-off-by: Jacob Rasmussen <jacobraz@google.com> Reviewed-by: Ross Zwisler <zwisler@google.com> Cc: <jacobraz@google.com> CC: stable@vger.kernel.org Link: https://lore.kernel.org/r/20191114232011.165762-1-jacobraz@google.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-15ASoC: wm8904: fix regcache handlingMichael Walle
The current code assumes that the power is turned off in SND_SOC_BIAS_OFF. If there are no actual regulator the codec isn't turned off and the registers are not reset to their default values but the regcache is still marked as dirty. Thus a value might not be written to the hardware if it is set to the default value. Do a software reset before turning off the power to make sure the registers are always reset to their default states. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20191112223629.21867-1-michael@walle.cc Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-14ALSA: usb-audio: Add skip_validation optionTakashi Iwai
The unit descriptor validation may lead to a probe error when the device provides a buggy descriptor or the validator detected incorrectly. For identifying such an error and band-aiding, give a new module option, skip_validation. With this option, the driver ignores the validation errors with the hexdump of the unit descriptor, so we can check it in a bit more details. Link: https://lore.kernel.org/r/20191114165613.7422-2-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-14ALSA: hda/hdmi - Clean up Intel platform-specific fixup checksTakashi Iwai
Introduce a new flag in hdmi_spec to indicate the Intel platform- specific fixups so that we can get rid of the lengthy codec ID checks. The flag is set in intel_hsw_common_init() commonly. Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Link: https://lore.kernel.org/r/20191111190937.19186-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-14Merge branch 'for-linus' into for-nextTakashi Iwai
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-14ALSA: usb-audio: Fix incorrect size check for processing/extension unitsTakashi Iwai
The recently introduced unit descriptor validation had some bug for processing and extension units, it counts a bControlSize byte twice so it expected a bigger size than it should have been. This seems resulting in a probe error on a few devices. Fix the calculation for proper checks of PU and EU. Fixes: 57f8770620e9 ("ALSA: usb-audio: More validations of descriptor units") Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191114165613.7422-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-14ALSA: usb-audio: Fix incorrect NULL check in create_yamaha_midi_quirk()Takashi Iwai
The commit 60849562a5db ("ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk()") added NULL checks in create_yamaha_midi_quirk(), but there was an overlook. The code allows one of either injd or outjd is NULL, but the second if check made returning -ENODEV if any of them is NULL. Fix it in a proper form. Fixes: 60849562a5db ("ALSA: usb-audio: Fix possible NULL dereference at create_yamaha_midi_quirk()") Reported-by: Pavel Machek <pavel@denx.de> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191113111259.24123-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-13ALSA: pcm: Fix stream lock usage in snd_pcm_period_elapsed()paulhsia
If the nullity check for `substream->runtime` is outside of the lock region, it is possible to have a null runtime in the critical section if snd_pcm_detach_substream is called right before the lock. Signed-off-by: paulhsia <paulhsia@chromium.org> Link: https://lore.kernel.org/r/20191112171715.128727-2-paulhsia@chromium.org Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-13ALSA: usb-audio: not submit urb for stopped endpointHenry Lin
While output urb's snd_complete_urb() is executing, calling prepare_outbound_urb() may cause endpoint stopped before prepare_outbound_urb() returns and result in next urb submitted to stopped endpoint. usb-audio driver cannot re-use it afterwards as the urb is still hold by usb stack. This change checks EP_FLAG_RUNNING flag after prepare_outbound_urb() again to let snd_complete_urb() know the endpoint already stopped and does not submit next urb. Below kind of error will be fixed: [ 213.153103] usb 1-2: timeout: still 1 active urbs on EP #1 [ 213.164121] usb 1-2: cannot submit urb 0, error -16: unknown error Signed-off-by: Henry Lin <henryl@nvidia.com> Cc: <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191113021420.13377-1-henryl@nvidia.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-12ASoC: soc-core: tidyup soc_probe_aux_devices()Kuninori Morimoto
snd_soc_bind_card() is calling many initialize functions for each card / link / dai / aux etc, etc, etc... When error happen, the message is indicated at snd_soc_bind_card(), not at each functions. But, only soc_probe_aux_devices() case is indicating error at functions, not at snd_soc_bind_card(). It is not an issue, but unbalanced. This patch moves error message to snd_soc_bind_card(). Also avoids deep-nested code. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87lfsthkw9.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: soc-core: merge snd_soc_bind_card() and snd_soc_instantiate_card()Kuninori Morimoto
having both soc_bind_card() and snd_soc_instantiate_card() is very confusable. Let's merge these. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87mud9hkwj.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: soc-core: merge soc_remove_component() and soc_cleanup_component()Kuninori Morimoto
having both soc_remove_component() and soc_cleanup_component() is very confusable. Let's merge these. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87o8xphkwt.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: soc-core: merge snd_soc_remove_dai_link() and soc_unbind_dai_link()Kuninori Morimoto
We don't need to separete snd_soc_remove_dai_link() and soc_unbind_dai_link() anymore. Let's merge these. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87pni5hkx1.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: soc-core: merge snd_soc_add_dai_link() and soc_bind_dai_link()Kuninori Morimoto
We don't need to separete snd_soc_add_dai_link() and soc_bind_dai_link() anymore. Let's merge these. One note is that before this patch, it adds list (A) eventhough if it had dai_link->ignore (1), or already bounded dai_link (2). But I guess it is wrong. This patch also solve this issue. /* BEFORE */ int soc_bind_dai_link(...) { ... (1) if (dai_link->ignore) return 0; (2) if (soc_is_dai_link_bound(...)) return 0; ... } int snd_soc_add_dai_link(...) { ... => ret = soc_bind_dai_link(...); => if (ret < 0) => return ret; (A) list_add_tail(&dai_link->list, &card->dai_link_list); ... } /* AFTER */ int snd_soc_add_dai_link(...) { ... (1) if (dai_link->ignore) return 0; (2) if (soc_is_dai_link_bound(...)) return 0; ... (A) list_add_tail(&dai_link->list, &card->dai_link_list); return 0; } Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87r22lhkx8.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: soc-core: merge snd_soc_unregister_dai() and soc_del_dai()Kuninori Morimoto
We don't need to separete snd_soc_unregister_dai() and soc_del_dai() anymore. Let's merge these Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87sgn1hkxg.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: soc-core: merge snd_soc_register_dai() and soc_add_dai()Kuninori Morimoto
We don't need to separete snd_soc_register_dai() and soc_add_dai() anymore. Let's merge these Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87tv7hhkxm.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: soc-core: remove soc_is_dai_link_bound()Kuninori Morimoto
Because complex separeted "card pre-listed component" and "topology added component" duplicated operation is now becoming simple, we don't need to check already bound dai_link which is not exist anymore. This patch removes soc_is_dai_link_bound(). Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87v9rxhkxw.wl-kuninori.morimoto.gx@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: Jack: Fix NULL pointer dereference in snd_soc_jack_reportPawel Harlozinski
Check for existance of jack before tracing. NULL pointer dereference has been reported by KASAN while unloading machine driver (snd_soc_cnl_rt274). Signed-off-by: Pawel Harlozinski <pawel.harlozinski@linux.intel.com> Link: https://lore.kernel.org/r/20191112130237.10141-1-pawel.harlozinski@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2019-11-12ASoC: SOF: topology: free kcontrol memory on errorDragos Tarcatu
The volume and bytes kcontrols are currently not freeing their memory on initialization failures. When an error occurs, all the widgets loaded so far are unloaded via sof_widget_unload(). But this only happens for the widgets that got successfully loaded. Fix that by kfree()-ing the allocated memory on load error. Fixes: 311ce4fe7637d ("ASoC: SOF: Add support for loading topologies") Reviewed-by: Paul Olaru <paul.olaru@nxp.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111222039.19651-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ALSA: au88x0: Fix incorrect device pointer for preallocationTakashi Iwai
The code change in commit 6974f8ad4494 ("ALSA: pci: Avoid non-standard macro usage") contained an incorrect conversion, which left the invalid pointer passed to the allocator for au88x0 driver. Fix it. Fixes: 6974f8ad4494 ("ALSA: pci: Avoid non-standard macro usage") Link: https://lore.kernel.org/r/20191112143243.22216-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2019-11-12ASoC: SOF: PM: only suspend to D0I3 when neededKeyon Jie
We should suspend audio to D3 by default, for the sake of power saving, change the condition of D0I3 suspending here to that when there is stream with suspend_ignored specified. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111223343.19986-5-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: SOF: add helper to check if we should enter d0i3 suspendKeyon Jie
Add helper to check if the DSP should be put in D0i3. This function returns true if a stream has ignored the SUSPEND trigger to keep the pipelines running in the DSP. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111223343.19986-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: SOF: PM: add check before setting d0_substateKeyon Jie
Add check before seeting d0_substate and return success if Audio DSP is already in the target substate. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111223343.19986-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: SOF: PM: add state machine to commentsKeyon Jie
Add Audio DSP state machine with comments. Note that the 'D0<-->runtime D0I3' part is not implemented yet. Signed-off-by: Keyon Jie <yang.jie@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111223343.19986-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: SOF: Intel: hda: use fallback for firmware namePierre-Louis Bossart
We have platforms such as CFL with no known I2S codec being used, and the ACPI tables are currently empty, so fall-back to using the firmware filename used in nocodec mode Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111222901.19892-4-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: Intel: acpi-match: split CNL tables in threePierre-Louis Bossart
Due to firmware manifest/signature differences, we have to use different firmware names, so split CNL machine table in three (CNL, CFL, CML). The CFL table is currently empty since all known platforms use HDaudio, but let's plan ahead. Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111222901.19892-2-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: SOF: Intel: Fix CFL and CML FW nocodec binary names.Liam Girdwood
The manifest information is different between CNL, CML and CFL platforms hence we need to load different files. Signed-off-by: Liam Girdwood <liam.r.girdwood@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111222901.19892-3-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-12ASoC: rt5682: cancel jack_detect_work if hs_jack is set to nullBard liao
jack_detect_work will be triggered by rt5682_irq. We should cancel it if hs_jack is set to null. Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20191111222152.19723-1-pierre-louis.bossart@linux.intel.com Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-11ASoC: rt5645: Fixed buddy jack support.Jacob Rasmussen
The headphone jack on buddy was broken with the following commit: commit 6b5da66322c5 ("ASoC: rt5645: read jd1_1 status for jd detection"). This changes the jd_mode for buddy to 4 so buddy can read from the same register that was used in the working version of this driver without affecting any other devices that might use this, since no other device uses jd_mode = 4. To test this I plugged and uplugged the headphone jack, verifying audio works. Signed-off-by: Jacob Rasmussen <jacobraz@google.com> Reviewed-by: Ross Zwisler <zwisler@google.com> Link: https://lore.kernel.org/r/20191111185957.217244-1-jacobraz@google.com Signed-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
2019-11-11ASoC: wm8904: configure sysclk/FLL automaticallyMichael Walle
This adds a new mode WM8904_CLK_AUTO which automatically enables the FLL if a frequency different than the MCLK is set. These additions make the codec work with the simple-card driver in general and especially in systems where the MCLK doesn't match the required clock. Signed-off-by: Michael Walle <michael@walle.cc> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20191108203152.19098-1-michael@walle.cc Signed-off-by: Mark Brown <broonie@kernel.org>
generated by cgit (git 2.34.1) at 2024-05-08 17:27:14 +0000