summaryrefslogtreecommitdiff
path: root/tools/gpio
AgeCommit message (Collapse)Author
2020-05-05tools: gpio: add bias flags to lsgpioKent Gibson
Add display of the bias flags. Signed-off-by: Kent Gibson <warthog618@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-04-04Merge tag 'gpio-v5.7-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO development for the v5.7 kernel cycle. Core and userspace API: - The userspace API KFIFOs have been imoproved with locks that do not block interrupts. This makes us better at getting events to userspace without blocking or disturbing new events arriving in the same time. This was reviewed by the KFIFO maintainer Stefani. This is a generic improvement which paves the road for similar improvements in other subsystems. - We provide a new ioctl() for monitoring changes in the line information, such as when multiple clients are taking lines and giving them back, possibly reconfiguring them in the process: we can now monitor that and not get stuck with stale static information. - An example tool 'gpio-watch' is provided to showcase this functionality. - Timestamps for events are switched to ktime_get_ns() which is monotonic. We previously had a 'realtime' stamp which could move forward and *backward* in time, which probably would just cause silent bugs and weird behaviour. In the long run we see two relevant timestamps: ktime_get_ns() or the timestamp sometimes provided by the GPIO hardware itself, if that exists. - Device Tree overlay support for GPIO hogs. On systems that load overlays, these overlays can now contain hogs, and will then be respected. - Handle pin control interaction with nonexisting pin ranges in the GPIO library core instead of in the individual drivers. New drivers: - New driver for the Mellanox BlueField 2 GPIO controller. Driver improvements: - Introduce the BGPIOF_NO_SET_ON_INPUT flag to the generic MMIO GPIO library and use this flag in the MT7621 driver. - Texas Instruments OMAP CPU power management improvements, such as blocking of idle on pending GPIO interrupts" * tag 'gpio-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (59 commits) Revert "gpio: eic-sprd: Use devm_platform_ioremap_resource()" pinctrl: Unconditionally assign .request()/.free() gpio: Unconditionally assign .request()/.free() gpio: export of_pinctrl_get to modules pinctrl: Define of_pinctrl_get() dummy for !PINCTRL gpio: Rename variable in core APIs gpio: Avoid using pin ranges with !PINCTRL gpiolib: Remove unused gpio_chip parameter from gpio_set_bias() gpiolib: Pass gpio_desc to gpio_set_config() gpiolib: Introduce gpiod_set_config() tools: gpio: Fix out-of-tree build regression gpio: gpiolib: fix a doc warning gpio: tegra186: Add Tegra194 pin ranges for GG.0 and GG.1 gpio: tegra186: Add support for pin ranges gpio: Support GPIO controllers without pin-ranges ARM: integrator: impd1: Use GPIO_LOOKUP() helper macro gpio: brcmstb: support gpio-line-names property tools: gpio: Fix typo in gpio-utils tools: gpio-hammer: Apply scripts/Lindent and retain good changes gpiolib: gpio_name_to_desc: factor out !name check ...
2020-03-27tools: gpio: Fix out-of-tree build regressionAnssi Hannula
Commit 0161a94e2d1c7 ("tools: gpio: Correctly add make dependencies for gpio_utils") added a make rule for gpio-utils-in.o but used $(output) instead of the correct $(OUTPUT) for the output directory, breaking out-of-tree build (O=xx) with the following error: No rule to make target 'out/tools/gpio/gpio-utils-in.o', needed by 'out/tools/gpio/lsgpio-in.o'. Stop. Fix that. Fixes: 0161a94e2d1c ("tools: gpio: Correctly add make dependencies for gpio_utils") Cc: <stable@vger.kernel.org> Cc: Laura Abbott <labbott@redhat.com> Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi> Link: https://lore.kernel.org/r/20200325103154.32235-1-anssi.hannula@bitwise.fi Reviewed-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2020-03-25.gitignore: add SPDX License IdentifierMasahiro Yamada
Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-25tools: gpio: Fix typo in gpio-utilsMykyta Poturai
Replace COMSUMER with proper CONSUMER Signed-off-by: Mykyta Poturai <mykyta.poturai@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-03-25tools: gpio-hammer: Apply scripts/Lindent and retain good changesGabriel Ravier
"retain good changes" means that I left the help string split up instead of having this weird thing where it tries to merge together the last three lines and it looks **really** bad Signed-off-by: Gabriel Ravier <gabravier@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-03-25tools: gpio-hammer: fix spelling mistake: "occurences" -> "occurrences"Colin Ian King
There is a spelling mistake in an error message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-03-25tools: gpio-hammer: Avoid potential overflow in mainGabriel Ravier
If '-o' was used more than 64 times in a single invocation of gpio-hammer, this could lead to an overflow of the 'lines' array. This commit fixes this by avoiding the overflow and giving a proper diagnostic back to the user Signed-off-by: Gabriel Ravier <gabravier@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-02-12tools: gpio: implement gpio-watchBartosz Golaszewski
Add a simple program that allows to test the new LINECHANGED_FD ioctl(). Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2019-11-13tools: gpio: Correctly add make dependencies for gpio_utilsLaura Abbott
gpio tools fail to build correctly with make parallelization: $ make -s -j24 ld: gpio-utils.o: file not recognized: file truncated make[1]: *** [/home/labbott/linux_upstream/tools/build/Makefile.build:145: lsgpio-in.o] Error 1 make: *** [Makefile:43: lsgpio-in.o] Error 2 make: *** Waiting for unfinished jobs.... This is because gpio-utils.o is used across multiple targets. Fix this by making gpio-utios.o a proper dependency. Cc: <stable@vger.kernel.org> Signed-off-by: Laura Abbott <labbott@redhat.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-10-22tools: gpio: Use !building_out_of_srctree to determine srctreeShuah Khan
make TARGETS=gpio kselftest fails with: Makefile:23: tools/build/Makefile.include: No such file or directory When the gpio tool make is invoked from tools Makefile, srctree is cleared and the current logic check for srctree equals to empty string to determine srctree location from CURDIR. When the build in invoked from selftests/gpio Makefile, the srctree is set to "." and the same logic used for srctree equals to empty is needed to determine srctree. Check building_out_of_srctree undefined as the condition for both cases to fix "make TARGETS=gpio kselftest" build failure. Cc: stable@vger.kernel.org Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2019-07-09Merge tag 'gpio-v5.3-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the big slew of GPIO changes for the v5.3 kernel cycle. This is mostly incremental work this time. Three important things: - The FMC subsystem is deleted through my tree. This happens through GPIO as its demise was discussed in relation to a patch decoupling its GPIO implementation from the standard way of handling GPIO. As it turns out, that is not the only subsystem it reimplements and the authors think it is better do scratch it and start over using the proper kernel subsystems than try to polish the rust shiny. See the commit (ACKed by the maintainers) for details. - Arnd made a small devres patch that was ACKed by Greg and goes into the device core. - SPDX header change colissions may happen, because at times I've seen that quite a lot changed during the -rc:s in regards to SPDX. (It is good stuff, tglx has me convinced, and it is worth the occasional pain.) Apart from this is is nothing controversial or problematic. Summary: Core: - When a gpio_chip request GPIOs from itself, it can now fully control the line characteristics, both machine and consumer flags. This makes a lot of sense, but took some time before I figured out that this is how it has to work. - Several smallish documentation fixes. New drivers: - The PCA953x driver now supports the TI TCA9539. - The DaVinci driver now supports the K3 AM654 SoCs. Driver improvements: - Major overhaul and hardening of the OMAP driver by Russell King. - Starting to move some drivers to the new API passing irq_chip along with the gpio_chip when adding the gpio_chip instead of adding it separately. Unrelated: - Delete the FMC subsystem" * tag 'gpio-v5.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits) Revert "gpio: tegra: Clean-up debugfs initialisation" gpiolib: Use spinlock_t instead of struct spinlock gpio: stp-xway: allow compile-testing gpio: stp-xway: get rid of the #include <lantiq_soc.h> dependency gpio: stp-xway: improve module clock error handling gpio: stp-xway: simplify error handling in xway_stp_probe() gpiolib: Clarify use of non-sleeping functions gpiolib: Fix references to gpiod_[gs]et_*value_cansleep() variants gpiolib: Document new gpio_chip.init_valid_mask field Documentation: gpio: Fix reference to gpiod_get_array() gpio: pl061: drop duplicate printing of device name gpio: altera: Pass irqchip when adding gpiochip gpio: siox: Use devm_ managed gpiochip gpio: siox: Add struct device *dev helper variable gpio: siox: Pass irqchip when adding gpiochip drivers: gpio: amd-fch: make resource struct const devres: allow const resource arguments gpio: ath79: Pass irqchip when adding gpiochip gpio: tegra: Clean-up debugfs initialisation gpio: siox: Switch to IRQ_TYPE_NONE ...
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500Thomas Gleixner
Based on 2 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation this program is free software you can redistribute it and or modify it under the terms of the gnu general public license version 2 as published by the free software foundation # extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 4122 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-20tools: gpio: Add include/linux/gpio.h to .gitignoreKelsey Skunberg
File include/linux/gpio.h is generated after building tools/testing/selftests Add gpio.h to .gitignore to help clean up working tree status. Signed-off-by: Kelsey Skunberg <skunberg.kelsey@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2018-12-28tools gpio: Allow overriding CFLAGSJiri Olsa
So that the user can specify outside CFLAGS values. Signed-off-by: Jiri Olsa <jolsa@kernel.org> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Hartmut Knaack <knaack.h@gmx.de> <knaack.h@gmx.de> Cc: Herton Krzesinski <herton@redhat.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Link: http://lkml.kernel.org/r/20181212102537.25902-7-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-03-18Merge tag 'v4.16-rc5' into develLinus Walleij
Linux 4.16-rc5 merged into the GPIO devel branch to resolve a nasty conflict between fixes and devel in the RCAR driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-03-01tools/gpio/gpio-event-mon: fix warningAnders Roxell
PRIu64 is defined in user space to match libc's uint64_t definition. However, gpioevent_data structure in the kernel is defined using the kernel's own __u64 type. gpio-event-mon.c: In function ‘monitor_device’: gpio-event-mon.c:102:19: warning: format ‘%lu’ expects argument of type ‘long unsigned int’, but argument 3 has type ‘__u64 {aka long long unsigned int}’ [-Wformat=] fprintf(stdout, "GPIO EVENT %" PRIu64 ": ", event.timestamp); ^~~~~~~~~~~~~~ LD /tmp/kselftest/gpiogpio-event-mon-in.o LINK /tmp/kselftest/gpiogpio-event-mon Fix is to replace PRIu64 with llu, which we know is what the kernel uses for __u64. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Tested-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-02-21tools: fix cross-compile var clobberingMartin Kelly
Currently a number of Makefiles break when used with toolchains that pass extra flags in CC and other cross-compile related variables (such as --sysroot). Thus we get this error when we use a toolchain that puts --sysroot in the CC var: ~/src/linux/tools$ make iio [snip] iio_event_monitor.c:18:10: fatal error: unistd.h: No such file or directory #include <unistd.h> ^~~~~~~~~~ This occurs because we clobber several env vars related to cross-compiling with lines like this: CC = $(CROSS_COMPILE)gcc Although this will point to a valid cross-compiler, we lose any extra flags that might exist in the CC variable, which can break toolchains that rely on them (for example, those that use --sysroot). This easily shows up using a Yocto SDK: $ . [snip]/sdk/environment-setup-cortexa8hf-neon-poky-linux-gnueabi $ echo $CC arm-poky-linux-gnueabi-gcc -march=armv7-a -mfpu=neon -mfloat-abi=hard -mcpu=cortex-a8 --sysroot=[snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi $ echo $CROSS_COMPILE arm-poky-linux-gnueabi- $ echo ${CROSS_COMPILE}gcc krm-poky-linux-gnueabi-gcc Although arm-poky-linux-gnueabi-gcc is a cross-compiler, we've lost the --sysroot and other flags that enable us to find the right libraries to link against, so we can't find unistd.h and other libraries and headers. Normally with the --sysroot flag we would find unistd.h in the sdk directory in the sysroot: $ find [snip]/sdk/sysroots -path '*/usr/include/unistd.h' [snip]/sdk/sysroots/cortexa8hf-neon-poky-linux-gnueabi/usr/include/unistd.h The perf Makefile adds CC = $(CROSS_COMPILE)gcc if and only if CC is not already set, and it compiles correctly with the above toolchain. So, generalize the logic that perf uses in the common Makefile and remove the manual CC = $(CROSS_COMPILE)gcc lines from each Makefile. Note that this patch does not fix cross-compile for all the tools (some have other bugs), but it does fix it for all except usb and acpi, which still have other unrelated issues. I tested both with and without the patch on native and cross-build and there appear to be no regressions. Link: http://lkml.kernel.org/r/20180107214028.23771-1-martin@martingkelly.com Signed-off-by: Martin Kelly <martin@martingkelly.com> Acked-by: Mark Brown <broonie@kernel.org> Cc: Tejun Heo <tj@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Jonathan Cameron <jic23@kernel.org> Cc: Pali Rohar <pali.rohar@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jacek Anaszewski <jacek.anaszewski@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Robert Moore <robert.moore@intel.com> Cc: Lv Zheng <lv.zheng@intel.com> Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Valentina Manea <valentina.manea.m@gmail.com> Cc: Shuah Khan <shuah@kernel.org> Cc: Mario Limonciello <mario.limonciello@dell.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-12-21tools/gpio: Fix build error with musl libcJoel Stanley
The GPIO tools build fails when using a buildroot toolchain that uses musl as it's C library: arm-broomstick-linux-musleabi-gcc -Wp,-MD,./.gpio-event-mon.o.d \ -Wp,-MT,gpio-event-mon.o -O2 -Wall -g -D_GNU_SOURCE \ -Iinclude -D"BUILD_STR(s)=#s" -c -o gpio-event-mon.o gpio-event-mon.c gpio-event-mon.c:30:6: error: unknown type name ‘u_int32_t’; did you mean ‘uint32_t’? u_int32_t handleflags, ^~~~~~~~~ uint32_t The glibc headers installed on my laptop include sys/types.h in unistd.h, but it appears that musl does not. Fixes: 97f69747d8b1 ("tools/gpio: add the gpio-event-mon tool") Cc: stable@vger.kernel.org Signed-off-by: Joel Stanley <joel@jms.id.au> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-12-20tools/gpio: Don't use u_int32_tJonathan Neuschäfer
u_int32_t is a non-standard version of uint32_t, that was apparently introduced by BSD. Use uint32_t from stdint.h instead. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-14Merge tag 'gpio-v4.15-1' of ↵Linus Torvalds
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Linus Walleij: "This is the bulk of GPIO changes for the v4.15 kernel cycle: Core: - Fix the semantics of raw GPIO to actually be raw. No inversion semantics as before, but also no open draining, and allow the raw operations to affect lines used for interrupts as the caller supposedly knows what they are doing if they are getting the big hammer. - Rewrote the __inner_function() notation calls to names that make more sense. I just find this kind of code disturbing. - Drop the .irq_base() field from the gpiochip since now all IRQs are mapped dynamically. This is nice. - Support for .get_multiple() in the core driver API. This allows us to read several GPIO lines with a single register read. This has high value for some usecases: it can be used to create oscilloscopes and signal analyzers and other things that rely on reading several lines at exactly the same instant. Also a generally nice optimization. This uses the new assign_bit() macro from the bitops lib that was ACKed by Andrew Morton and is implemented for two drivers, one of them being the generic MMIO driver so everyone using that will be able to benefit from this. - Do not allow requests of Open Drain and Open Source setting of a GPIO line simultaneously. If the hardware actually supports enabling both at the same time the electrical result would be disastrous. - A new interrupt chip core helper. This will be helpful to deal with "banked" GPIOs, which means GPIO controllers with several logical blocks of GPIO inside them. This is several gpiochips per device in the device model, in contrast to the case when there is a 1-to-1 relationship between a device and a gpiochip. New drivers: - Maxim MAX3191x industrial serializer, a very interesting piece of professional I/O hardware. - Uniphier GPIO driver. This is the GPIO block from the recent Socionext (ex Fujitsu and Panasonic) platform. - Tegra 186 driver. This is based on the new banked GPIO infrastructure. Other improvements: - Some documentation improvements. - Wakeup support for the DesignWare DWAPB GPIO controller. - Reset line support on the DesignWare DWAPB GPIO controller. - Several non-critical bug fixes and improvements for the Broadcom BRCMSTB driver. - Misc non-critical bug fixes like exotic errorpaths, removal of dead code etc. - Explicit comments on fall-through switch() statements" * tag 'gpio-v4.15-1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (65 commits) gpio: tegra186: Remove tegra186_gpio_lock_class gpio: rcar: Add r8a77995 (R-Car D3) support pinctrl: bcm2835: Fix some merge fallout gpio: Fix undefined lock_dep_class gpio: Automatically add lockdep keys gpio: Introduce struct gpio_irq_chip.first gpio: Disambiguate struct gpio_irq_chip.nested gpio: Add Tegra186 support gpio: Export gpiochip_irq_{map,unmap}() gpio: Implement tighter IRQ chip integration gpio: Move lock_key into struct gpio_irq_chip gpio: Move irq_valid_mask into struct gpio_irq_chip gpio: Move irq_nested into struct gpio_irq_chip gpio: Move irq_chained_parent to struct gpio_irq_chip gpio: Move irq_default_type to struct gpio_irq_chip gpio: Move irq_handler to struct gpio_irq_chip gpio: Move irqdomain into struct gpio_irq_chip gpio: Move irqchip into struct gpio_irq_chip gpio: Introduce struct gpio_irq_chip pinctrl: armada-37xx: remove unused variable ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-07tools: gpio: Print error string on IOCTL failuresJacopo Mondi
Add to error messages the error description by concatenating output of strerror() function to error messages print out by gpio-utils.c on IOCTL failures. Rationalize error messages, while at there, making all of them look the same. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-26gpio-hammer: fix make consumer_label suitable to work on gpio-nailsUwe Kleine-König
There are no gpio-nalils, so fix label accordingly. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-11gpio: tools: add .gitignore for generated filesShuah Khan
Add .gitignore for generated files. Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com> [Dropped include dir] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-17Merge branch 'kbuild' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild Pull kbuild updates from Michal Marek: - prototypes for x86 asm-exported symbols (Adam Borowski) and a warning about missing CRCs (Nick Piggin) - asm-exports fix for LTO (Nicolas Pitre) - thin archives improvements (Nick Piggin) - linker script fix for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION (Nick Piggin) - genksyms support for __builtin_va_list keyword - misc minor fixes * 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: x86/kbuild: enable modversions for symbols exported from asm kbuild: fix scripts/adjust_autoksyms.sh* for the no modules case scripts/kallsyms: remove last remnants of --page-offset option make use of make variable CURDIR instead of calling pwd kbuild: cmd_export_list: tighten the sed script kbuild: minor improvement for thin archives build kbuild: modpost warn if export version crc is missing kbuild: keep data tables through dead code elimination kbuild: improve linker compatibility with lib-ksyms.o build genksyms: Regenerate parser kbuild/genksyms: handle va_list type kbuild: thin archives for multi-y targets kbuild: kallsyms allow 3-pass generation if symbols size has changed
2016-12-11make use of make variable CURDIR instead of calling pwdUwe Kleine-König
make already provides the current working directory in a variable, so make use of it instead of forking a shell. Also replace usage of PWD by CURDIR. PWD is provided by most shells, but not all, so this makes the build system more robust. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Michal Marek <mmarek@suse.com>
2016-10-24tools/gpio: re-work gpio hammer with gpio operationsBamvor Jian Zhang
Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-10-24tools/gpio: add gpio basic opereationsBamvor Jian Zhang
Add basic gpio operations. User could get/set gpio value for specific line of gpiochip. Reference "tools/gpio/gpio-hammer.c" or "tools/testing/selftest/gpio/gpio-mockup-chardev.c" for how to use it. Signed-off-by: Bamvor Jian Zhang <bamvor.zhangjian@linaro.org> Reviewed-by: Michael Welling <mwelling@ieee.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-08-08tools/gpio: fix gpio-event-mon header commentBaruch Siach
Fixes: 97f69747d8b1 ('tools/gpio: add the gpio-event-mon tool') Signed-off-by: Baruch Siach <baruch@tkos.co.il> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-23tools/gpio: add install sectionAndy Shevchenko
Allow user to call install target. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Tested-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-23tools/gpio: move to tools buildsystemAndy Shevchenko
There is a nice buildsystem dedicated for userspace tools in Linux kernel tree. Switch gpio target to be built by it. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Tested-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-15tools/gpio: add the gpio-event-mon toolLinus Walleij
The gpio-event-mon is used from userspace as an example of how to monitor GPIO line events. It will latch on to a certain GPIO line on a certain gpiochip and print timestamped events as they arrive. Example output: $ gpio-event-mon -n gpiochip2 -o 0 -r -f Monitoring line 0 on gpiochip2 Initial line value: 1 GPIO EVENT 946685798487609863: falling edge GPIO EVENT 946685798732482910: rising edge GPIO EVENT 946685799115997314: falling edge GPIO EVENT 946685799381469726: rising edge Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-15tools/gpio: add the gpio-hammer toolLinus Walleij
The gpio-hammer is used from userspace as an example of how to retrieve a GPIO handle for one or several GPIO lines and hammer the outputs from low to high and back again. It will pulse the selected lines once per second for a specified number of times or indefinitely if no loop count is supplied. Example output: $ gpio-hammer -n gpiochip0 -o5 -o6 -o7 Hammer lines [5, 6, 7] on gpiochip0, initial states: [1, 1, 1] [-] [5: 0, 6: 0, 7: 0] Tested-by: Michael Welling <mwelling@ieee.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-31tools/gpio: Add missing initialization of device_nameGeert Uytterhoeven
lsgpio.c: In function ‘main’: lsgpio.c:166:7: warning: ‘device_name’ may be used uninitialized in this functio n [-Wmaybe-uninitialized] ret = list_device(device_name); ^ Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-03-31tools/gpio: Enable compiler optimization to catch more bugsGeert Uytterhoeven
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-25gpio: present the consumer of a line to userspaceLinus Walleij
I named the field representing the current user of GPIO line as "label" but this is too vague and ambiguous. Before anyone gets confused, rename it to "consumer" and indicate clearly in the documentation that this is a string set by the user of the line. Also clean up leftovers in the documentation. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-23tools: gpio: Small updates for output formatMarkus Pargmann
Use %2d for the GPIO line number. This should align the results horziontally for most gpio chips. The GPIO label uses quotes for real values. For GPIO names this is currently missing. The patch adds the missing quote. Signed-off-by: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19gpio: add userspace ABI for GPIO line informationLinus Walleij
This adds a GPIO line ABI for getting name, label and a few select flags from the kernel. This hides the kernel internals and only tells userspace what it may need to know: the different in-kernel consumers are masked behind the flag "kernel" and that is all userspace needs to know. However electric characteristics like active low, open drain etc are reflected to userspace, as this is important information. We provide information on all lines on all chips, later on we will likely add a flag for the chardev consumer so we can filter and display only the lines userspace actually uses in e.g. lsgpio, but then we first need an ABI for userspace to grab and use (get/set/select direction) a GPIO line. Sample output from "lsgpio" on ux500: GPIO chip: gpiochip7, "8011e000.gpio", 32 GPIO lines line 0: unnamed unlabeled line 1: unnamed unlabeled (...) line 25: unnamed "SFH7741 Proximity Sensor" [kernel output open-drain] line 26: unnamed unlabeled (...) Tested-by: Michael Welling <mwelling@ieee.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-19gpio: store reflect the label to userspaceLinus Walleij
The gpio_chip label is useful for userspace to understand what kind of GPIO chip it is dealing with. Let's store a copy of this label in the gpio_device, add it to the struct passed to userspace for GPIO_GET_CHIPINFO_IOCTL and modify lsgpio to show it. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-02-09tools/gpio: create GPIO toolsLinus Walleij
This creates GPIO tools under tools/gpio/* and adds a single example program to list the GPIOs on a system. When proper devices are created it provides this minimal output: Cc: Johan Hovold <johan@kernel.org> Cc: Michael Welling <mwelling@ieee.org> Cc: Markus Pargmann <mpa@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>