summaryrefslogtreecommitdiff
path: root/tools/kvm
AgeCommit message (Collapse)Author
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-10-12tools/kvm_stat: Add Python 3 support to kvm_statJeremy Cline
Make kvm_stat support Python 3 by changing the use of "print" to a function rather than a statement, switching from "iteritems" and "iterkeys" (removed in Python 3) to "items" and "keys" respectively, and decoding bytes to strings when dealing with text. With this change, kvm_stat is usable with Python 2.6 and greater. Signed-off-by: Jeremy Cline <jeremy@jcline.org> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-07-26tools/kvm_stat: add '-f help' to get the available event listLin Ma
Signed-off-by: Lin Ma <lma@suse.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-07-26tools/kvm_stat: use variables instead of hard paths in help outputLin Ma
Using variables instead of hard paths makes the requirements information more accurate. Signed-off-by: Lin Ma <lma@suse.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-27tools/kvm_stat: add new interactive command 'b'Stefan Raspl
Toggle display total number of events by guest (debugfs only). When switching to display of events by guest, field filters remain active. I.e. the number of events per guest reported considers only events matching the filters. Likewise with pid/guest filtering. Note that when switching to display of events by guest, DebugfsProvider remains to collect data for events as it did before, but the read() method summarizes the values by pid. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-27tools/kvm_stat: add new command line switch '-i'Stefan Raspl
It might be handy to display the full history of event stats to compare the current event distribution against any available historic data. Since we have that available for debugfs, we offer a respective command line option to display what's available. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-27tools/kvm_stat: fix error on interactive command 'g'Stefan Raspl
Fix an instance where print_all_gnames() is called without the mandatory argument, resulting in a stack trace. To reproduce, simply press 'g' in interactive mode. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: display guest list in pid/guest selection screensStefan Raspl
Display a (possibly inaccurate) list of all running guests. Note that we leave a bit of extra room above the list for potential error messages. Furthermore, we deliberately do not reject pids or guest names that are not in our list, as we cannot rule out that our fuzzy approach might be in error somehow. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: add new interactive command 'o'Stefan Raspl
Add new interactive command 'o' to toggle sorting by 'CurAvg/s' (default) and 'Total' columns. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: add new interactive command 's'Stefan Raspl
Add new command 's' to modify the update interval. Limited to a maximum of 25.5 sec and a minimum of 0.1 sec, since curses cannot handle longer and shorter delays respectively. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: add new interactive command 'h'Stefan Raspl
Display interactive commands reference on 'h'. While at it, sort interactive commands alphabetically in various places. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: rename 'Current' column to 'CurAvg/s'Stefan Raspl
'Current' can be misleading as it doesn't tell whether this is the amount of events in the last interval or the current average per second. Note that this necessitates widening the respective column by one more character. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: make heading look a bit more like 'top'Stefan Raspl
Print header in standout font just like the 'top' command does. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: display message indicating lack of eventsStefan Raspl
Give users some indication on the reason why no data is displayed on the screen yet. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: show cursor in selection screensStefan Raspl
Show the cursor in the interactive screens to specify pid, filter or guest name as an orientation for the user. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: move functions to corresponding classesStefan Raspl
Quite a few of the functions are used only in a single class. Moving functions accordingly to improve the overall structure. Furthermore, introduce a base class for the providers, which might also come handy for future extensions. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: simplify initializersStefan Raspl
Simplify a couple of initialization routines: * TracepointProvider and DebugfsProvider: Pass pid into __init__() instead of switching to the requested value in an extra call after initializing to the default first. * Pass a single options object into Stats.__init__(), delaying options evaluation accordingly, instead of evaluating options first and passing several parts of the options object to Stats.__init__() individually. * Eliminate Stats.update_provider_pid(), since this 2-line function is now used in a single place only. * Remove extra call to update_drilldown() in Tui.__init__() by getting the value of options.fields right initially when parsing options. * Simplify get_providers() logic. * Avoid duplicate fields initialization by handling it once in the providers' __init__() methods. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: remove extra statementStefan Raspl
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: removed unused functionStefan Raspl
Function available_fields() is not used in any place. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: simplify line print logicStefan Raspl
Simplify line print logic for header and data lines in interactive mode as previously suggested by Radim. While at it, add a space between the first two columns to avoid the total bleeding into the event name. Furthermore, for column 'Current', differentiate between no events being reported (empty 'Current' column) vs the case where events were reported but the average was rounded down to zero ('0' in 'Current column), for the folks who appreciate the difference. Finally: Only skip events which were not reported at all yet, instead of events that don't have a value in the current interval. Considered using constants for the field widths in the format strings. However, that would make things a bit more complicated, and considering that there are only two places where output happens, I figured it isn't worth the trouble. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: remove unnecessary header redrawsStefan Raspl
Certain interactive commands will not modify any information displayed in the header, hence we can skip them. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: fix undue use of initial sleeptimeStefan Raspl
We should not use the initial sleeptime for any key press that does not switch to a different screen, as that introduces an unaesthetic flicker due to two updates in quick succession. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: fix event counts display for interrupted intervalsStefan Raspl
When an update interval is interrupted via key press (e.g. space), the 'Current' column value is calculated using the full interval length instead of the elapsed time, which leads to lower than actual numbers. Furthermore, the value should be rounded, not truncated. This is fixed by using the actual elapsed time for the calculation. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-06-08tools/kvm_stat: fix typoStefan Raspl
Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2017-03-29tools/kvm_stat: add '%Total' columnStefan Raspl
Add column '%Total' next to 'Total' for easier comparison of numbers between hosts. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: add interactive command 'r'Stefan Raspl
Provide an interactive command to reset the tracepoint statistics. Requires some extra work for debugfs, as the counters cannot be reset. On the up side, this offers us the opportunity to have debugfs values reset on startup and whenever a filter is modified, becoming consistent with the tracepoint provider. As a bonus, 'kvmstat -dt' will now provide useful output, instead of mixing values in totally different orders of magnitude. Furthermore, we avoid unnecessary resets when any of the filters is "changed" interactively to the previous value. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Acked-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: add interactive command 'c'Stefan Raspl
Provide a real simple way to erase any active filter. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: add option '--guest'Stefan Raspl
Add a new option '-g'/'--guest' to select a particular process by providing the QEMU guest name. Notes: - The logic to figure out the pid corresponding to the guest name might look scary, but works pretty reliably in practice; in the unlikely event that it returns add'l flukes, it will bail out and hint at using '-p' instead, no harm done. - Mixing '-g' and '-p' is possible, and the final instance specified on the command line is the significant one. This is consistent with current behavior for '-p' which, if specified multiple times, also regards the final instance as the significant one. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: remove regex filter on empty inputStefan Raspl
Behavior on empty/0 input for regex and pid filtering was inconsistent, as the former would keep the current filter, while the latter would (naturally) remove any pid filtering. Make things consistent by falling back to the default filter on empty input for the regex filter dialogue. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: display regex when set to non-defaultStefan Raspl
If a user defines a regex filter through the interactive command, display the active regex in the header's second line. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: print error messages on faulty pid filter inputStefan Raspl
Print helpful messages in case users enter invalid input or invalid pids in the interactive pid filter dialogue. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: remove pid filter on empty inputStefan Raspl
Improve consistency in the interactive dialogue for pid filtering by removing any filters on empty input (in addition to entering 0). Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: display guest name when using pid filterStefan Raspl
When running kvm_stat with option '-p' to filter per process, display the QEMU guest name next to the pid, if available. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-By: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: document list of interactive commandsStefan Raspl
Apart from the source code, there does not seem to be a place that documents the interactive capabilities of kvm_stat yet. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: reduce perceived idle time on filter updatesStefan Raspl
Whenever a user adds a filter, we * redraw the header immediately for a snappy response * print a message indicating to the user that we're busy while the noticeable delay induced by updating all of the stats objects takes place * update the statistics ASAP (i.e. after 0.25s instead of 3s) to be consistent with behavior on startup To do so, we split the Tui's refresh() method to allow for drawing header and stats separately, and trigger a header refresh whenever we are about to do something that takes a while - like updating filters. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: full PEP8 complianceStefan Raspl
Provides all missing empty lines as required for full PEP compliance. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: fix trace setup glitch on field updates in TracepointProviderStefan Raspl
Updating the fields of the TracepointProvider does not propagate changes to the tracepoints. This shows when a pid filter is enabled, whereby subsequent extensions of the fields of the Tracepoint provider (e.g. by toggling drilldown) will not modify the tracepoints as required. To reproduce, select a specific process via interactive command 'p', and enable drilldown via 'x' - none of the fields with the braces will appear although they should. The fix will always leave all available fields in the TracepointProvider enabled. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Based-on-text-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: fix misc glitchesStefan Raspl
Addresses - eliminate extra import - missing variable initialization - type redefinition from int to float - passing of int type argument instead of string - a couple of PEP8-reported indentation/formatting glitches - remove unused variable drilldown in class Tui Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: handle SIGINT in log and batch modesStefan Raspl
SIGINT causes ugly unhandled exceptions in log and batch mode, which we prevent by catching the exceptions accordingly. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: catch curses exceptions onlyStefan Raspl
The previous version was catching all exceptions, including SIGINT. We only want to catch the curses exceptions here. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-by: Janosch Frank <frankja@linux.vnet.ibm.com> Reviewed-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2017-03-29tools/kvm_stat: hide cursorStefan Raspl
When running kvm_stat in interactive mode, the cursor appears at the lower left corner, which looks a bit distracting. This patch hides the cursor by turning it invisible. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Reviewed-By: Sascha Silbe <silbe@linux.vnet.ibm.com> Reviewed-by: Marc Hartmayer <mhartmay@linux.vnet.ibm.com> Signed-off-by: Radim Krčmář <rkrcmar@redhat.com>
2016-05-25tools: kvm_stat: Add commentsJanosch Frank
A lot of the code works with the perf events about which only sparse documentation was available until 2012. Having that information now, we can clarify what is done in the code. Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-25tools: kvm_stat: Introduce pid monitoringJanosch Frank
Having stats for single VMs can help to determine the problem of a VM without the need of running other tools like perf. The tracepoints already allowed pid level monitoring, but kvm_stat didn't have support for it till now. Support for the newly implemented debugfs vm monitoring was also implemented. Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-25tools: kvm_stat: Powerpc related fixesHemant Kumar
kvm_stat script is failing to execute on powerpc : # ./kvm_stat Traceback (most recent call last): File "./kvm_stat", line 825, in <module> main() File "./kvm_stat", line 813, in main providers = get_providers(options) File "./kvm_stat", line 778, in get_providers providers.append(TracepointProvider()) File "./kvm_stat", line 416, in __init__ self.filters = get_filters() File "./kvm_stat", line 315, in get_filters if ARCH.exit_reasons: AttributeError: 'ArchPPC' object has no attribute 'exit_reasons' This is because, its trying to access a non-defined attribute. Also, the IOCTL number of RESET is incorrect for powerpc. The correct number has been added. Signed-off-by: Hemant Kumar <hemant@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-25tools: Add kvm_stat man pagePaolo Bonzini
Converted from the Texinfo source in QEMU to asciidoc. The a2x incantation was provided by Janosch Frank. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-05-25tools: Add kvm_stat vm monitor scriptJanosch Frank
This tool displays kvm vm exit statistics to ease vm monitoring. It takes its data from the kvm debugfs files or the vm tracepoints and outputs them as a curses ui or simple text. It was moved from qemu, as it is dependent on the kernel whereas qemu works with a large number of kernel versions, some of which may break the script. Signed-off-by: Janosch Frank <frankja@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>