| Age | Commit message (Collapse) | Author |
|---|
|
Alexei reported a fd leak issue in gen loader (when invoked from
bpftool) [0]. When adding ksym support, map fd allocation was moved from
stack to loader map, however I missed closing these fds (relevant when
cleanup label is jumped to on error). For the success case, the
allocated fd is returned in loader ctx, hence this problem is not
noticed.
Make three changes, first MAX_USED_MAPS in MAX_FD_ARRAY_SZ instead of
MAX_USED_PROGS, the braino was not a problem until now for this case as
we didn't try to close map fds (otherwise use of it would have tried
closing 32 additional fds in ksym btf fd range). Then, do a cleanup for
all nr_maps fds in cleanup label code, so that in case of error all
temporary map fds from bpf_gen__map_create are closed.
Then, adjust the cleanup label to only generate code for the required
number of program and map fds. To trim code for remaining program
fds, lay out prog_fd array in stack in the end, so that we can
directly skip the remaining instances. Still stack size remains same,
since changing that would require changes in a lot of places
(including adjustment of stack_off macro), so nr_progs_sz variable is
only used to track required number of iterations (and jump over
cleanup size calculated from that), stack offset calculation remains
unaffected.
The difference for test_ksyms_module.o is as follows:
libbpf: //prog cleanup iterations: before = 34, after = 5
libbpf: //maps cleanup iterations: before = 64, after = 2
Also, move allocation of gen->fd_array offset to bpf_gen__init. Since
offset can now be 0, and we already continue even if add_data returns 0
in case of failure, we do not need to distinguish between 0 offset and
failure case 0, as we rely on bpf_gen__finish to check errors. We can
also skip check for gen->fd_array in add_*_fd functions, since
bpf_gen__init will take care of it.
[0]: https://lore.kernel.org/bpf/CAADnVQJ6jSitKSNKyxOrUzwY2qDRX0sPkJ=VLGHuCLVJ=qOt9g@mail.gmail.com
Fixes: 18f4fccbf314 ("libbpf: Update gen_loader to emit BTF_KIND_FUNC relocations")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211112232022.899074-1-memxor@gmail.com
|
|
Fix bpf_map_lookup_and_delete_elem_flags() to pass the return code through
libbpf_err_errno() as we do similarly in bpf_map_lookup_and_delete_elem().
Fixes: f12b65432728 ("libbpf: Streamline error reporting for low-level APIs")
Signed-off-by: Mehrdad Arshad Rad <arshad.rad@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211104171354.11072-1-arshad.rad@gmail.com
|
|
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-11-01
We've added 181 non-merge commits during the last 28 day(s) which contain
a total of 280 files changed, 11791 insertions(+), 5879 deletions(-).
The main changes are:
1) Fix bpf verifier propagation of 64-bit bounds, from Alexei.
2) Parallelize bpf test_progs, from Yucong and Andrii.
3) Deprecate various libbpf apis including af_xdp, from Andrii, Hengqi, Magnus.
4) Improve bpf selftests on s390, from Ilya.
5) bloomfilter bpf map type, from Joanne.
6) Big improvements to JIT tests especially on Mips, from Johan.
7) Support kernel module function calls from bpf, from Kumar.
8) Support typeless and weak ksym in light skeleton, from Kumar.
9) Disallow unprivileged bpf by default, from Pawan.
10) BTF_KIND_DECL_TAG support, from Yonghong.
11) Various bpftool cleanups, from Quentin.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (181 commits)
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
bpf: Factor out helpers for ctx access checking
bpf: Factor out a helper to prepare trampoline for struct_ops prog
selftests, bpf: Fix broken riscv build
riscv, libbpf: Add RISC-V (RV64) support to bpf_tracing.h
tools, build: Add RISC-V to HOSTARCH parsing
riscv, bpf: Increase the maximum number of iterations
selftests, bpf: Add one test for sockmap with strparser
selftests, bpf: Fix test_txmsg_ingress_parser error
...
====================
Link: https://lore.kernel.org/r/20211102013123.9005-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Deprecate AF_XDP support in libbpf ([0]). This has been moved to
libxdp as it is a better fit for that library. The AF_XDP support only
uses the public libbpf functions and can therefore just use libbpf as
a library from libxdp. The libxdp APIs are exactly the same so it
should just be linking with libxdp instead of libbpf for the AF_XDP
functionality. If not, please submit a bug report. Linking with both
libraries is supported but make sure you link in the correct order so
that the new functions in libxdp are used instead of the deprecated
ones in libbpf.
Libxdp can be found at https://github.com/xdp-project/xdp-tools.
[0] Closes: https://github.com/libbpf/libbpf/issues/270
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/20211029090111.4733-1-magnus.karlsson@gmail.com
|
|
Add macros for 64-bit RISC-V PT_REGS to bpf_tracing.h.
Signed-off-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211028161057.520552-4-bjorn@kernel.org
|
|
There are some instances where we don't use O_CLOEXEC when opening an
fd, fix these up. Otherwise, it is possible that a parallel fork causes
these fds to leak into a child process on execve.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211028063501.2239335-6-memxor@gmail.com
|
|
Add a simple wrapper for passing an fd and getting a new one >= 3 if it
is one of 0, 1, or 2. There are two primary reasons to make this change:
First, libbpf relies on the assumption a certain BPF fd is never 0 (e.g.
most recently noticed in [0]). Second, Alexei pointed out in [1] that
some environments reset stdin, stdout, and stderr if they notice an
invalid fd at these numbers. To protect against both these cases, switch
all internal BPF syscall wrappers in libbpf to always return an fd >= 3.
We only need to modify the syscall wrappers and not other code that
assumes a valid fd by doing >= 0, to avoid pointless churn, and because
it is still a valid assumption. The cost paid is two additional syscalls
if fd is in range [0, 2].
[0]: e31eec77e4ab ("bpf: selftests: Fix fd cleanup in get_branch_snapshot")
[1]: https://lore.kernel.org/bpf/CAADnVQKVKY8o_3aU8Gzke443+uHa-eGoM0h7W4srChMXU1S4Bg@mail.gmail.com
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211028063501.2239335-5-memxor@gmail.com
|
|
This extends existing ksym relocation code to also support relocating
weak ksyms. Care needs to be taken to zero out the src_reg (currently
BPF_PSEUOD_BTF_ID, always set for gen_loader by bpf_object__relocate_data)
when the BTF ID lookup fails at runtime. This is not a problem for
libbpf as it only sets ext->is_set when BTF ID lookup succeeds (and only
proceeds in case of failure if ext->is_weak, leading to src_reg
remaining as 0 for weak unresolved ksym).
A pattern similar to emit_relo_kfunc_btf is followed of first storing
the default values and then jumping over actual stores in case of an
error. For src_reg adjustment, we also need to perform it when copying
the populated instruction, so depending on if copied insn[0].imm is 0 or
not, we decide to jump over the adjustment.
We cannot reach that point unless the ksym was weak and resolved and
zeroed out, as the emit_check_err will cause us to jump to cleanup
label, so we do not need to recheck whether the ksym is weak before
doing the adjustment after copying BTF ID and BTF FD.
This is consistent with how libbpf relocates weak ksym. Logging
statements are added to show the relocation result and aid debugging.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211028063501.2239335-4-memxor@gmail.com
|
|
This uses the bpf_kallsyms_lookup_name helper added in previous patches
to relocate typeless ksyms. The return value ENOENT can be ignored, and
the value written to 'res' can be directly stored to the insn, as it is
overwritten to 0 on lookup failure. For repeating symbols, we can simply
copy the previously populated bpf_insn.
Also, we need to take care to not close fds for typeless ksym_desc, so
reuse the 'off' member's space to add a marker for typeless ksym and use
that to skip them in cleanup_relos.
We add a emit_ksym_relo_log helper that avoids duplicating common
logging instructions between typeless and weak ksym (for future commit).
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211028063501.2239335-3-memxor@gmail.com
|
|
This patch adds the libbpf infrastructure for supporting a
per-map-type "map_extra" field, whose definition will be
idiosyncratic depending on map type.
For example, for the bloom filter map, the lower 4 bits of
map_extra is used to denote the number of hash functions.
Please note that until libbpf 1.0 is here, the
"bpf_create_map_params" struct is used as a temporary
means for propagating the map_extra field to the kernel.
Signed-off-by: Joanne Koong <joannekoong@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211027234504.30744-3-joannekoong@fb.com
|
|
Add a flag to `enum libbpf_strict_mode' to disable the global
`bpf_objects_list', preventing race conditions when concurrent threads
call bpf_object__open() or bpf_object__close().
bpf_object__next() will return NULL if this option is set.
Callers may achieve the same workflow by tracking bpf_objects in
application code.
[0] Closes: https://github.com/libbpf/libbpf/issues/293
Signed-off-by: Joe Burton <jevburton@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211026223528.413950-1-jevburton.kernel@gmail.com
|
|
Use the compiler-defined __BYTE_ORDER__ instead of the libc-defined
__BYTE_ORDER for consistency.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211026010831.748682-3-iii@linux.ibm.com
|
|
__BYTE_ORDER is supposed to be defined by a libc, and __BYTE_ORDER__ -
by a compiler. bpf_core_read.h checks __BYTE_ORDER == __LITTLE_ENDIAN,
which is true if neither are defined, leading to incorrect behavior on
big-endian hosts if libc headers are not included, which is often the
case.
Fixes: ee26dade0e3b ("libbpf: Add support for relocatable bitfields")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211026010831.748682-2-iii@linux.ibm.com
|
|
The name of the API doesn't convey clearly that this size is in number
of bytes (there needed to be a separate comment to make this clear in
libbpf.h). Further, measuring the size of BPF program in bytes is not
exactly the best fit, because BPF programs always consist of 8-byte
instructions. As such, bpf_program__insn_cnt() is a better alternative
in pretty much any imaginable case.
So schedule bpf_program__size() deprecation starting from v0.7 and it
will be removed in libbpf 1.0.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211025224531.1088894-5-andrii@kernel.org
|
|
Schedule deprecation of a set of APIs that are related to multi-instance
bpf_programs:
- bpf_program__set_prep() ([0]);
- bpf_program__{set,unset}_instance() ([1]);
- bpf_program__nth_fd().
These APIs are obscure, very niche, and don't seem to be used much in
practice. bpf_program__set_prep() is pretty useless for anything but the
simplest BPF programs, as it doesn't allow to adjust BPF program load
attributes, among other things. In short, it already bitrotted and will
bitrot some more if not removed.
With bpf_program__insns() API, which gives access to post-processed BPF
program instructions of any given entry-point BPF program, it's now
possible to do whatever necessary adjustments were possible with
set_prep() API before, but also more. Given any such use case is
automatically an advanced use case, requiring users to stick to
low-level bpf_prog_load() APIs and managing their own prog FDs is
reasonable.
[0] Closes: https://github.com/libbpf/libbpf/issues/299
[1] Closes: https://github.com/libbpf/libbpf/issues/300
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211025224531.1088894-4-andrii@kernel.org
|
|
Add APIs providing read-only access to bpf_program BPF instructions ([0]).
This is useful for diagnostics purposes, but it also allows a cleaner
support for cloning BPF programs after libbpf did all the FD resolution
and CO-RE relocations, subprog instructions appending, etc. Currently,
cloning BPF program is possible only through hijacking a half-broken
bpf_program__set_prep() API, which doesn't really work well for anything
but most primitive programs. For instance, set_prep() API doesn't allow
adjusting BPF program load parameters which are necessary for loading
fentry/fexit BPF programs (the case where BPF program cloning is
a necessity if doing some sort of mass-attachment functionality).
Given bpf_program__set_prep() API is set to be deprecated, having
a cleaner alternative is a must. libbpf internally already keeps track
of linear array of struct bpf_insn, so it's not hard to expose it. The
only gotcha is that libbpf previously freed instructions array during
bpf_object load time, which would make this API much less useful overall,
because in between bpf_object__open() and bpf_object__load() a lot of
changes to instructions are done by libbpf.
So this patch makes libbpf hold onto prog->insns array even after BPF
program loading. I think this is a small price for added functionality
and improved introspection of BPF program code.
See retsnoop PR ([1]) for how it can be used in practice and code
savings compared to relying on bpf_program__set_prep().
[0] Closes: https://github.com/libbpf/libbpf/issues/298
[1] https://github.com/anakryiko/retsnoop/pull/1
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211025224531.1088894-3-andrii@kernel.org
|
|
Fix instruction index validity check which has off-by-one error.
Fixes: 3ee4f5335511 ("libbpf: Split bpf_core_apply_relo() into bpf_program independent helper.")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211025224531.1088894-2-andrii@kernel.org
|
|
Original code assumed fixed and correct BTF header length. That's not
always the case, though, so fix this bug with a proper additional check.
And use actual header length instead of sizeof(struct btf_header) in
sanity checks.
Fixes: 8a138aed4a80 ("bpf: btf: Add BTF support to libbpf")
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211023003157.726961-2-andrii@kernel.org
|
|
btf_header's str_off+str_len or type_off+type_len can overflow as they
are u32s. This will lead to bypassing the sanity checks during BTF
parsing, resulting in crashes afterwards. Fix by using 64-bit signed
integers for comparison.
Fixes: d8123624506c ("libbpf: Fix BTF data layout checks and allow empty BTF")
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211023003157.726961-1-andrii@kernel.org
|
|
We can't use section name anymore because they are not unique
and pinning objects with multiple programs with the same
progtype/secname will fail.
[0] Closes: https://github.com/libbpf/libbpf/issues/273
Fixes: 33a2c75c55e2 ("libbpf: add internal pin_name")
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20211021214814.1236114-2-sdf@google.com
|
|
Add btf__type_cnt() and btf__raw_data() APIs and deprecate
btf__get_nr_type() and btf__get_raw_data() since the old APIs
don't follow the libbpf naming convention for getters which
omit 'get' in the name (see [0]). btf__raw_data() is just an
alias to the existing btf__get_raw_data(). btf__type_cnt()
now returns the number of all types of the BTF object
including 'void'.
[0] Closes: https://github.com/libbpf/libbpf/issues/279
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211022130623.1548429-2-hengqi.chen@gmail.com
|
|
Free btf_dedup if btf_ensure_modifiable() returns error.
Fixes: 919d2b1dbb07 ("libbpf: Allow modification of BTF and add btf__add_str API")
Signed-off-by: Mauricio Vásquez <mauricio@kinvolk.io>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211022202035.48868-1-mauricio@kinvolk.io
|
|
Building libbpf sources out of kernel tree (in Github repo) we run into
compilation error due to unknown __aligned attribute. It must be coming
from some kernel header, which is not available to Github sources. Use
explicit __attribute__((aligned(16))) instead.
Fixes: 961632d54163 ("libbpf: Fix dumping non-aligned __int128")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211022192502.2975553-1-andrii@kernel.org
|
|
Map name that's assigned to internal maps (.rodata, .data, .bss, etc)
consist of a small prefix of bpf_object's name and ELF section name as
a suffix. This makes it hard for users to "guess" the name to use for
looking up by name with bpf_object__find_map_by_name() API.
One proposal was to drop object name prefix from the map name and just
use ".rodata", ".data", etc, names. One downside called out was that
when multiple BPF applications are active on the host, it will be hard
to distinguish between multiple instances of .rodata and know which BPF
object (app) they belong to. Having few first characters, while quite
limiting, still can give a bit of a clue, in general.
Note, though, that btf_value_type_id for such global data maps (ARRAY)
points to DATASEC type, which encodes full ELF name, so tools like
bpftool can take advantage of this fact to "recover" full original name
of the map. This is also the reason why for custom .data.* and .rodata.*
maps libbpf uses only their ELF names and doesn't prepend object name at
all.
Another downside of such approach is that it is not backwards compatible
and, among direct use of bpf_object__find_map_by_name() API, will break
any BPF skeleton generated using bpftool that was compiled with older
libbpf version.
Instead of causing all this pain, libbpf will still generate map name
using a combination of object name and ELF section name, but it will
allow looking such maps up by their natural names, which correspond to
their respective ELF section names. This means non-truncated ELF section
names longer than 15 characters are going to be expected and supported.
With such set up, we get the best of both worlds: leave small bits of
a clue about BPF application that instantiated such maps, as well as
making it easy for user apps to lookup such maps at runtime. In this
sense it closes corresponding libbpf 1.0 issue ([0]).
BPF skeletons will continue using full names for lookups.
[0] Closes: https://github.com/libbpf/libbpf/issues/275
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021014404.2635234-10-andrii@kernel.org
|
|
Add support for having multiple .rodata and .data data sections ([0]).
.rodata/.data are supported like the usual, but now also
.rodata.<whatever> and .data.<whatever> are also supported. Each such
section will get its own backing BPF_MAP_TYPE_ARRAY, just like
.rodata and .data.
Multiple .bss maps are not supported, as the whole '.bss' name is
confusing and might be deprecated soon, as well as user would need to
specify custom ELF section with SEC() attribute anyway, so might as well
stick to just .data.* and .rodata.* convention.
User-visible map name for such new maps is going to be just their ELF
section names.
[0] https://github.com/libbpf/libbpf/issues/274
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021014404.2635234-8-andrii@kernel.org
|
|
Remove internal libbpf assumption that there can be only one .rodata,
.data, and .bss map per BPF object. To achieve that, extend and
generalize the scheme that was used for keeping track of relocation ELF
sections. Now each ELF section has a temporary extra index that keeps
track of logical type of ELF section (relocations, data, read-only data,
BSS). Switch relocation to this scheme, as well as .rodata/.data/.bss
handling.
We don't yet allow multiple .rodata, .data, and .bss sections, but no
libbpf internal code makes an assumption that there can be only one of
each and thus they can be explicitly referenced by a single index. Next
patches will actually allow multiple .rodata and .data sections.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021014404.2635234-5-andrii@kernel.org
|
|
Minimize the usage of class-agnostic gelf_xxx() APIs from libelf. These
APIs require copying ELF data structures into local GElf_xxx structs and
have a more cumbersome API. BPF ELF file is defined to be always 64-bit
ELF object, even when intended to be run on 32-bit host architectures,
so there is no need to do class-agnostic conversions everywhere. BPF
static linker implementation within libbpf has been using Elf64-specific
types since initial implementation.
Add two simple helpers, elf_sym_by_idx() and elf_rel_by_idx(), for more
succinct direct access to ELF symbol and relocation records within ELF
data itself and switch all the GElf_xxx usage into Elf64_xxx
equivalents. The only remaining place within libbpf.c that's still using
gelf API is gelf_getclass(), as there doesn't seem to be a direct way to
get underlying ELF bitness.
No functional changes intended.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021014404.2635234-4-andrii@kernel.org
|
|
Name currently anonymous internal struct that keeps ELF-related state
for bpf_object. Just a bit of clean up, no functional changes.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021014404.2635234-3-andrii@kernel.org
|
|
There isn't a good use case where anyone but libbpf itself needs to call
btf__finalize_data(). It was implemented for internal use and it's not
clear why it was made into public API in the first place. To function, it
requires active ELF data, which is stored inside bpf_object for the
duration of opening phase only. But the only BTF that needs bpf_object's
ELF is that bpf_object's BTF itself, which libbpf fixes up automatically
during bpf_object__open() operation anyways. There is no need for any
additional fix up and no reasonable scenario where it's useful and
appropriate.
Thus, btf__finalize_data() is just an API atavism and is better removed.
So this patch marks it as deprecated immediately (v0.6+) and moves the
code from btf.c into libbpf.c where it's used in the context of
bpf_object opening phase. Such code co-location allows to make code
structure more straightforward and remove bpf_object__section_size() and
bpf_object__variable_offset() internal helpers from libbpf_internal.h,
making them static. Their naming is also adjusted to not create
a wrong illusion that they are some sort of method of bpf_object. They
are internal helpers and are called appropriately.
This is part of libbpf 1.0 effort ([0]).
[0] Closes: https://github.com/libbpf/libbpf/issues/276
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211021014404.2635234-2-andrii@kernel.org
|
|
Currently ptr_is_aligned() takes size, and not alignment, as a
parameter, which may be overly pessimistic e.g. for __i128 on s390,
which must be only 8-byte aligned. Fix by using btf__align_of().
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211021104658.624944-2-iii@linux.ibm.com
|
|
Non-aligned integers are dumped as bitfields, which is supported for at
most 64-bit integers. Fix by using the same trick as
btf_dump_float_data(): copy non-aligned values to the local buffer.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211013160902.428340-4-iii@linux.ibm.com
|
|
On big-endian arches not only bytes, but also bits are numbered in
reverse order (see e.g. S/390 ELF ABI Supplement, but this is also true
for other big-endian arches as well).
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211013160902.428340-3-iii@linux.ibm.com
|
|
In preparation for bpf_program__get_prog_info_linear deprecation, move
the single use in libbpf to call bpf_obj_get_info_by_fd directly.
Signed-off-by: Dave Marchevsky <davemarchevsky@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211011082031.4148337-2-davemarchevsky@fb.com
|
|
Although relying on some definitions from the netlink.h and if_link.h
headers copied into tools/include/uapi/linux/, libbpf does not need
those headers to stay entirely up-to-date with their original versions,
and the warnings emitted by the Makefile when it detects a difference
are usually just noise. Let's remove those warnings.
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211010002528.9772-1-quentin@isovalent.com
|
|
Patch set [1] introduced BTF_KIND_TAG to allow tagging
declarations for struct/union, struct/union field, var, func
and func arguments and these tags will be encoded into
dwarf. They are also encoded to btf by llvm for the bpf target.
After BTF_KIND_TAG is introduced, we intended to use it
for kernel __user attributes. But kernel __user is actually
a type attribute. Upstream and internal discussion showed
it is not a good idea to mix declaration attribute and
type attribute. So we proposed to introduce btf_type_tag
as a type attribute and existing btf_tag renamed to
btf_decl_tag ([2]).
This patch renamed BTF_KIND_TAG to BTF_KIND_DECL_TAG and some
other declarations with *_tag to *_decl_tag to make it clear
the tag is for declaration. In the future, BTF_KIND_TYPE_TAG
might be introduced per [3].
[1] https://lore.kernel.org/bpf/20210914223004.244411-1-yhs@fb.com/
[2] https://reviews.llvm.org/D111588
[3] https://reviews.llvm.org/D111199
Fixes: b5ea834dde6b ("bpf: Support for new btf kind BTF_KIND_TAG")
Fixes: 5b84bd10363e ("libbpf: Add support for BTF_KIND_TAG")
Fixes: 5c07f2fec003 ("bpftool: Add support for BTF_KIND_TAG")
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211012164838.3345699-1-yhs@fb.com
|
|
Program on writable tracepoint is BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE,
but its attachment is the same as BPF_PROG_TYPE_RAW_TRACEPOINT.
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211004094857.30868-3-hotforest@gmail.com
|
|
The "install_headers" target in libbpf's Makefile would unconditionally
export all API headers to the target directory. When those headers are
installed to compile another application, this means that make always
finds newer dependencies for the source files relying on those headers,
and deduces that the targets should be rebuilt.
Avoid that by making "install_headers" depend on the source header
files, and (re-)install them only when necessary.
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211007194438.34443-2-quentin@isovalent.com
|
|
No conflicts.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Deprecate bpf_{map,program}__{prev,next} APIs. Replace them with
a new set of APIs named bpf_object__{prev,next}_{program,map} which
follow the libbpf API naming convention ([0]). No functionality changes.
[0] Closes: https://github.com/libbpf/libbpf/issues/296
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211003165844.4054931-2-hengqi.chen@gmail.com
|
|
BPF objects are not reloadable after unload. Users are expected to use
bpf_object__close() to unload and free up resources in one operation.
No need to expose bpf_object__unload() as a public API, deprecate it
([0]). Add bpf_object__unload() as an alias to internal
bpf_object_unload() and replace all bpf_object__unload() uses to avoid
compilation errors.
[0] Closes: https://github.com/libbpf/libbpf/issues/290
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211002161000.3854559-1-hengqi.chen@gmail.com
|
|
Recent-ish versions of make do no longer consider number signs ("#") as
comment symbols when they are inserted inside of a macro reference or in
a function invocation. In such cases, the symbols should not be escaped.
There are a few occurrences of "\#" in libbpf's and samples' Makefiles.
In the former, the backslash is harmless, because grep associates no
particular meaning to the escaped symbol and reads it as a regular "#".
In samples' Makefile, recent versions of make will pass the backslash
down to the compiler, making the probe fail all the time and resulting
in the display of a warning about "make headers_install" being required,
even after headers have been installed.
A similar issue has been addressed at some other locations by commit
9564a8cf422d ("Kbuild: fix # escaping in .cmd files for future Make").
Let's address it for libbpf's and samples' Makefiles in the same
fashion, by using a "$(pound)" variable (pulled from
tools/scripts/Makefile.include for libbpf, or re-defined for the
samples).
Reference for the change in make:
https://git.savannah.gnu.org/cgit/make.git/commit/?id=c6966b323811c37acedff05b57
Fixes: 2f3830412786 ("libbpf: Make libbpf_version.h non-auto-generated")
Fixes: 07c3bbdb1a9b ("samples: bpf: print a warning about headers_install")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211006111049.20708-1-quentin@isovalent.com
|
|
Add a bulk copying api, btf__add_btf(), that speeds up and simplifies
appending entire contents of one BTF object to another one, taking care
of copying BTF type data, adjusting resulting BTF type IDs according to
their new locations in the destination BTF object, as well as copying
and deduplicating all the referenced strings and updating all the string
offsets in new BTF types as appropriate.
This API is intended to be used from tools that are generating and
otherwise manipulating BTFs generically, such as pahole. In pahole's
case, this API is useful for speeding up parallelized BTF encoding, as
it allows pahole to offload all the intricacies of BTF type copying to
libbpf and handle the parallelization aspects of the process.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Link: https://lore.kernel.org/bpf/20211006051107.17921-2-andrii@kernel.org
|
|
This change updates the BPF syscall loader to relocate BTF_KIND_FUNC
relocations, with support for weak kfunc relocations. The general idea
is to move map_fds to loader map, and also use the data for storing
kfunc BTF fds. Since both reuse the fd_array parameter, they need to be
kept together.
For map_fds, we reserve MAX_USED_MAPS slots in a region, and for kfunc,
we reserve MAX_KFUNC_DESCS. This is done so that insn->off has more
chances of being <= INT16_MAX than treating data map as a sparse array
and adding fd as needed.
When the MAX_KFUNC_DESCS limit is reached, we fall back to the sparse
array model, so that as long as it does remain <= INT16_MAX, we pass an
index relative to the start of fd_array.
We store all ksyms in an array where we try to avoid calling the
bpf_btf_find_by_name_kind helper, and also reuse the BTF fd that was
already stored. This also speeds up the loading process compared to
emitting calls in all cases, in later tests.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-9-memxor@gmail.com
|
|
Preserve these calls as it allows verifier to succeed in loading the
program if they are determined to be unreachable after dead code
elimination during program load. If not, the verifier will fail at
runtime. This is done for ext->is_weak symbols similar to the case for
variable ksyms.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-8-memxor@gmail.com
|
|
This patch adds libbpf support for kernel module function call support.
The fd_array parameter is used during BPF program load to pass module
BTFs referenced by the program. insn->off is set to index into this
array, but starts from 1, because insn->off as 0 is reserved for
btf_vmlinux.
We try to use existing insn->off for a module, since the kernel limits
the maximum distinct module BTFs for kfuncs to 256, and also because
index must never exceed the maximum allowed value that can fit in
insn->off (INT16_MAX). In the future, if kernel interprets signed offset
as unsigned for kfunc calls, this limit can be increased to UINT16_MAX.
Also introduce a btf__find_by_name_kind_own helper to start searching
from module BTF's start id when we know that the BTF ID is not present
in vmlinux BTF (in find_ksym_btf_id).
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211002011757.311265-7-memxor@gmail.com
|
|
Daniel Borkmann says:
====================
bpf-next 2021-10-02
We've added 85 non-merge commits during the last 15 day(s) which contain
a total of 132 files changed, 13779 insertions(+), 6724 deletions(-).
The main changes are:
1) Massive update on test_bpf.ko coverage for JITs as preparatory work for
an upcoming MIPS eBPF JIT, from Johan Almbladh.
2) Add a batched interface for RX buffer allocation in AF_XDP buffer pool,
with driver support for i40e and ice from Magnus Karlsson.
3) Add legacy uprobe support to libbpf to complement recently merged legacy
kprobe support, from Andrii Nakryiko.
4) Add bpf_trace_vprintk() as variadic printk helper, from Dave Marchevsky.
5) Support saving the register state in verifier when spilling <8byte bounded
scalar to the stack, from Martin Lau.
6) Add libbpf opt-in for stricter BPF program section name handling as part
of libbpf 1.0 effort, from Andrii Nakryiko.
7) Add a document to help clarifying BPF licensing, from Alexei Starovoitov.
8) Fix skel_internal.h to propagate errno if the loader indicates an internal
error, from Kumar Kartikeya Dwivedi.
9) Fix build warnings with -Wcast-function-type so that the option can later
be enabled by default for the kernel, from Kees Cook.
10) Fix libbpf to ignore STT_SECTION symbols in legacy map definitions as it
otherwise errors out when encountering them, from Toke Høiland-Jørgensen.
11) Teach libbpf to recognize specialized maps (such as for perf RB) and
internally remove BTF type IDs when creating them, from Hengqi Chen.
12) Various fixes and improvements to BPF selftests.
====================
Link: https://lore.kernel.org/r/20211002001327.15169-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
A bunch of BPF maps do not support specifying BTF types for key and value.
This is non-uniform and inconvenient[0]. Currently, libbpf uses a retry
logic which removes BTF type IDs when BPF map creation failed. Instead
of retrying, this commit recognizes those specialized maps and removes
BTF type IDs when creating BPF map.
[0] Closes: https://github.com/libbpf/libbpf/issues/355
Signed-off-by: Hengqi Chen <hengqi.chen@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210930161456.3444544-2-hengqi.chen@gmail.com
|
|
Free struct strset itself, not just its internal parts.
Fixes: 90d76d3ececc ("libbpf: Extract internal set-of-strings datastructure APIs")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20211001185910.86492-1-andrii@kernel.org
|
|
drivers/net/phy/bcm7xxx.c
d88fd1b546ff ("net: phy: bcm7xxx: Fixed indirect MMD operations")
f68d08c437f9 ("net: phy: bcm7xxx: Add EPHY entry for 72165")
net/sched/sch_api.c
b193e15ac69d ("net: prevent user from passing illegal stab size")
69508d43334e ("net_sched: Use struct_size() and flex_array_size() helpers")
Both cases trivial - adjacent code additions.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When fed an empty BPF object, bpftool gen skeleton -L crashes at
btf__set_fd() since it assumes presence of obj->btf, however for
the sequence below clang adds no .BTF section (hence no BTF).
Reproducer:
$ touch a.bpf.c
$ clang -O2 -g -target bpf -c a.bpf.c
$ bpftool gen skeleton -L a.bpf.o
/* SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) */
/* THIS FILE IS AUTOGENERATED! */
struct a_bpf {
struct bpf_loader_ctx ctx;
Segmentation fault (core dumped)
The same occurs for files compiled without BTF info, i.e. without
clang's -g flag.
Fixes: 67234743736a (libbpf: Generate loader program out of BPF ELF file.)
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210930061634.1840768-1-memxor@gmail.com
|
