| Age | Commit message (Collapse) | Author |
|---|
|
objtool grew this new warning:
Warning: synced file at 'tools/objtool/arch/x86/include/asm/inat.h' differs from latest kernel version at 'arch/x86/include/asm/inat.h'
which upstream header grew new INAT_SEG_* definitions.
Sync up the tooling version of the header.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Stephen Rothwell reported this cross-compilation build failure:
| In file included from orc_dump.c:19:0:
| orc.h:21:10: fatal error: asm/orc_types.h: No such file or directory
| ...
Caused by:
6a77cff819ae ("objtool: Move synced files to their original relative locations")
Use the proper arch header files location, not the host-arch location.
Bisected-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Linux-Next Mailing List <linux-next@vger.kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20171108030152.bd76eahiwjwjt3kp@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Replace the nasty diff checks in the objtool Makefile with a clean bash
script, and make the warnings more specific.
Heavily inspired by tools/perf/check-headers.sh.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/ab015f15ccd8c0c6008493c3c6ee3d495eaf2927.1509974346.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This will enable more straightforward comparisons, and it also makes the
files 100% identical.
Suggested-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/407b2aaa317741f48fcf821592c0e96ab3be1890.1509974346.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
kernel's latest version
This fixes the following warning:
warning: objtool: x86 instruction decoder differs from kernel
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/013315a808ccf5580abc293808827c8e2b5e1354.1509719152.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When an error occurs before adding an allocated insn to the list, free
it before returning.
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/336da800bf6070eae11f4e0a3b9ca64c27658114.1508430423.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Print top-level objtool commands, along with the error on incorrect
command line usage. Objtool command line parser exit's with code 129,
for incorrect usage. Convert the cmd_usage() exit code also, to maintain
consistency across objtool.
After the patch:
$ ./objtool -j
Unknown option: -j
usage: objtool COMMAND [ARGS]
Commands:
check Perform stack metadata validation on an object file
orc Generate in-place ORC unwind tables for an object file
$ echo $?
129
Signed-off-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1507992474-16142-1-git-send-email-kamalesh@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
If asm code specifies an UNWIND_HINT_EMPTY hint, don't warn if the
section ends unexpectedly. This can happen with the xen-head.S code
because the hypercall_page is "text" but it's all zeros.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Juergen Gross <jgross@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/ddafe199dd8797e40e3c2777373347eba1d65572.1505764066.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Arnd Bergmann reported a bunch of warnings like:
crypto/jitterentropy.o: warning: objtool: jent_fold_time()+0x3b: call without frame pointer save/setup
crypto/jitterentropy.o: warning: objtool: jent_stuck()+0x1d: call without frame pointer save/setup
crypto/jitterentropy.o: warning: objtool: jent_unbiased_bit()+0x15: call without frame pointer save/setup
crypto/jitterentropy.o: warning: objtool: jent_read_entropy()+0x32: call without frame pointer save/setup
crypto/jitterentropy.o: warning: objtool: jent_entropy_collector_free()+0x19: call without frame pointer save/setup
and
arch/x86/events/core.o: warning: objtool: collect_events uses BP as a scratch register
arch/x86/events/core.o: warning: objtool: events_ht_sysfs_show()+0x22: call without frame pointer save/setup
With certain rare configurations, GCC sometimes sets up the frame
pointer with:
lea (%rsp),%rbp
instead of:
mov %rsp,%rbp
The instructions are equivalent, so treat the former like the latter.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/a468af8b28a69b83fffc6d7668be9b6fcc873699.1506526584.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
For inline asm statements which have a CALL instruction, we list the
stack pointer as a constraint to convince GCC to ensure the frame
pointer is set up first:
static inline void foo()
{
register void *__sp asm(_ASM_SP);
asm("call bar" : "+r" (__sp))
}
Unfortunately, that pattern causes Clang to corrupt the stack pointer.
The fix is easy: convert the stack pointer register variable to a global
variable.
It should be noted that the end result is different based on the GCC
version. With GCC 6.4, this patch has exactly the same result as
before:
defconfig defconfig-nofp distro distro-nofp
before 9820389 9491555 8816046 8516940
after 9820389 9491555 8816046 8516940
With GCC 7.2, however, GCC's behavior has changed. It now changes its
behavior based on the conversion of the register variable to a global.
That somehow convinces it to *always* set up the frame pointer before
inserting *any* inline asm. (Therefore, listing the variable as an
output constraint is a no-op and is no longer necessary.) It's a bit
overkill, but the performance impact should be negligible. And in fact,
there's a nice improvement with frame pointers disabled:
defconfig defconfig-nofp distro distro-nofp
before 9796316 9468236 9076191 8790305
after 9796957 9464267 9076381 8785949
So in summary, while listing the stack pointer as an output constraint
is no longer necessary for newer versions of GCC, it's still needed for
older versions.
Suggested-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/3db862e970c432ae823cf515c52b54fec8270e0e.1505942196.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The kbuild bot reported the following warning with GCC 4.4 and a
randconfig:
net/socket.o: warning: objtool: compat_sock_ioctl()+0x1083: stack state mismatch: cfa1=7+160 cfa2=-1+0
This is caused by another GCC non-optimization, where it backs up and
restores the stack pointer for no apparent reason:
2f91: 48 89 e0 mov %rsp,%rax
2f94: 4c 89 e7 mov %r12,%rdi
2f97: 4c 89 f6 mov %r14,%rsi
2f9a: ba 20 00 00 00 mov $0x20,%edx
2f9f: 48 89 c4 mov %rax,%rsp
This issue would have been happily ignored before the following commit:
dd88a0a0c861 ("objtool: Handle GCC stack pointer adjustment bug")
But now that objtool is paying attention to such stack pointer writes
to/from a register, it needs to understand them properly. In this case
that means recognizing that the "mov %rsp, %rax" instruction is
potentially a backup of the stack pointer.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Dmitriy Vyukov <dvyukov@google.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Miguel Bernal Marin <miguel.bernal.marin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: dd88a0a0c861 ("objtool: Handle GCC stack pointer adjustment bug")
Link: http://lkml.kernel.org/r/8c7aa8e9a36fbbb6655d9d8e7cea58958c912da8.1505942196.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Arnd Bergmann reported that a randconfig build was failing with the
following link error:
built-in.o: member arch/x86/kernel/time.o in archive is not an object
It turns out the link failed because the time.o file had been corrupted
by objtool:
nm: arch/x86/kernel/time.o: File format not recognized
In certain rare cases, when a .o file's ORC table is very small, the
.data section size doesn't change because it's page aligned. Because
all the existing sections haven't changed size, libelf doesn't detect
any section header changes, and so it doesn't update the section header
table properly. Instead it writes junk in the section header entries
for the new ORC sections.
Make sure libelf properly updates the section header table by setting
the ELF_F_DIRTY flag in the top level elf struct.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 627fce14809b ("objtool: Add ORC unwind table generation")
Link: http://lkml.kernel.org/r/e650fd0f2d8a209d1409a9785deb101fdaed55fb.1505459813.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Binutils 2.29-9 in Debian return an error when elf_getdata is invoked
on empty section (.note.GNU-stack in all kernel files), causing
immediate failure of kernel build with:
elf_getdata: can't manipulate null section
As nothing is done with sections that have zero size, just do not
retrieve their data at all.
Signed-off-by: Petr Vandrovec <petr@vandrovec.name>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/2ce30a44349065b70d0f00e71e286dc0cbe745e6.1505459652.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Let's free the allocated char array 'relaname' before returning,
in order to avoid leaking memory.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: mingo.kernel.org@gmail.com
Link: http://lkml.kernel.org/r/20170914060138.26472-1-martink@posteo.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Arnd Bergmann reported the following warning with GCC 7.1.1:
fs/fs_pin.o: warning: objtool: pin_kill()+0x139: stack state mismatch: cfa1=7+88 cfa2=7+96
And the kbuild robot reported the following warnings with GCC 5.4.1:
fs/fs_pin.o: warning: objtool: pin_kill()+0x182: return with modified stack frame
fs/quota/dquot.o: warning: objtool: dquot_alloc_inode()+0x140: stack state mismatch: cfa1=7+120 cfa2=7+128
fs/quota/dquot.o: warning: objtool: dquot_free_inode()+0x11a: stack state mismatch: cfa1=7+112 cfa2=7+120
Those warnings are caused by an unusual GCC non-optimization where it
uses an intermediate register to adjust the stack pointer. It does:
lea 0x8(%rsp), %rcx
...
mov %rcx, %rsp
Instead of the obvious:
add $0x8, %rsp
It makes no sense to use an intermediate register, so I opened a GCC bug
to track it:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81813
But it's not exactly a high-priority bug and it looks like we'll be
stuck with this issue for a while. So for now we have to track register
values when they're loaded with stack pointer offsets.
This is kind of a big workaround for a tiny problem, but c'est la vie.
I hope to eventually create a GCC plugin to implement a big chunk of
objtool's functionality. Hopefully at that point we'll be able to
remove of a lot of these GCC-isms from the objtool code.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/6a41a96884c725e7f05413bb7df40cfe824b2444.1504028945.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
When GCC adds NOP padding between functions, those NOPs aren't
associated with a function symbol, which breaks objtool's detection of a
function falling through to another function. Instead it shows
confusing errors like:
drivers/mtd/chips/cfi_util.o: warning: objtool: cfi_qry_mode_on()+0x8b: return with modified stack frame
drivers/mtd/chips/cfi_util.o: warning: objtool: cfi_qry_mode_on()+0x0: stack state mismatch: cfa1=-4-32 cfa2=7+8
drivers/mtd/chips/cfi_cmdset_0002.o: warning: objtool: fixup_use_fwh_lock()+0x8: unknown stack-related register move
drivers/mtd/chips/cfi_cmdset_0002.o: warning: objtool: fixup_use_fwh_lock()+0x0: stack state mismatch: cfa1=6+16 cfa2=7+8
drivers/mtd/chips/cfi_cmdset_0002.o: warning: objtool: do_otp_write()+0xa: unsupported stack pointer realignment
drivers/mtd/chips/cfi_cmdset_0002.o: warning: objtool: do_otp_write()+0x0: stack state mismatch: cfa1=-4-40 cfa2=7+8
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/43e7aae9a7a7710cd6df597fa9dc501da4ba0602.1502472193.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
When GCC realigns a function's stack, it sometimes uses %r13 as the DRAP
register, like:
push %r13
lea 0x10(%rsp), %r13
and $0xfffffffffffffff0, %rsp
pushq -0x8(%r13)
push %rbp
mov %rsp, %rbp
push %r13
...
mov -0x8(%rbp),%r13
leaveq
lea -0x10(%r13), %rsp
pop %r13
retq
Since %r13 was pushed onto the stack twice, its two stack locations need
to be stored separately. The first push of %r13 is its original value,
and the second push of %r13 is the caller's stack frame address.
Since %r13 is a callee-saved register, we need to track the stack
location of its original value separately from the DRAP register.
This fixes the following false positive warning:
lib/ubsan.o: warning: objtool: val_to_string.constprop.7()+0x97: leave instruction with modified stack frame
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: baa41469a7b9 ("objtool: Implement stack validation 2.0")
Link: http://lkml.kernel.org/r/3da23a6d4c5b3c1e21fc2ccc21a73941b97ff20a.1502401017.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The validate_branch() function should never return a negative value.
Errors are treated as warnings so that even if something goes wrong,
objtool does its best to generate ORC data for the rest of the file.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: baa41469a7b9 ("objtool: Implement stack validation 2.0")
Link: http://lkml.kernel.org/r/d86671cfde823b50477cd2f6f548dfe54871e24d.1502401017.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Objtool is failing to build with GCC 4.4.7 due to the following
warnings:
cc1: warnings being treated as errors
In file included from orc.h:21,
from orc_gen.c:21:
orc_types.h:86: error: packed attribute is unnecessary for ‘sp_offset’
orc_types.h:87: error: packed attribute is unnecessary for ‘bp_offset’
orc_types.h:88: error: packed attribute is unnecessary for ‘sp_reg’
I suspect those warnings are a GCC bug. But -Wpacked isn't very useful
anyway, so just disable it.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 627fce14809b ("objtool: Add ORC unwind table generation")
Link: http://lkml.kernel.org/r/76d85d7b5a87566465095c500bce222ff5d7b146.1501188854.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
With '-mtune=atom', which is enabled with CONFIG_MATOM=y, GCC uses some
unusual instructions for setting up the stack.
Instead of:
mov %rsp, %rbp
it does:
lea (%rsp), %rbp
And instead of:
add imm, %rsp
it does:
lea disp(%rsp), %rsp
Add support for these instructions to the objtool decoder.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: baa41469a7b9 ("objtool: Implement stack validation 2.0")
Link: http://lkml.kernel.org/r/4ea1db896e821226efe1f8e09f270771bde47e65.1501188854.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
When a whitelisted function uses one of the ALTERNATIVE macros, it
produces false positive warnings like:
arch/x86/kvm/vmx.o: warning: objtool: .altinstr_replacement+0x0: unreachable instruction
arch/x86/kvm/svm.o: warning: objtool: .altinstr_replacement+0x6e: unreachable instruction
There's no easy way to whitelist alternative instructions, so instead
just skip any 'unreachable' warnings associated with them.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/a5d0a8c60155f03b36a31fac871e12cf75f35fd0.1501188854.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Arnd reported some false positive warnings with GCC 7:
drivers/hid/wacom_wac.o: warning: objtool: wacom_bpt3_touch()+0x2a5: stack state mismatch: cfa1=7+8 cfa2=6+16
drivers/iio/adc/vf610_adc.o: warning: objtool: vf610_adc_calculate_rates() falls through to next function vf610_adc_sample_set()
drivers/pwm/pwm-hibvt.o: warning: objtool: hibvt_pwm_get_state() falls through to next function hibvt_pwm_remove()
drivers/pwm/pwm-mediatek.o: warning: objtool: mtk_pwm_config() falls through to next function mtk_pwm_enable()
drivers/spi/spi-bcm2835.o: warning: objtool: .text: unexpected end of section
drivers/spi/spi-bcm2835aux.o: warning: objtool: .text: unexpected end of section
drivers/watchdog/digicolor_wdt.o: warning: objtool: dc_wdt_get_timeleft() falls through to next function dc_wdt_restart()
When GCC 7 detects a potential divide-by-zero condition, it sometimes
inserts a UD2 instruction for the case where the divisor is zero,
instead of letting the hardware trap on the divide instruction.
Objtool doesn't consider UD2 to be fatal unless it's annotated with
unreachable(). So it considers the GCC-generated UD2 to be non-fatal,
and it tries to follow the control flow past the UD2 and gets
confused.
Previously, objtool *did* assume UD2 was always a dead end. That
changed with the following commit:
d1091c7fa3d5 ("objtool: Improve detection of BUG() and other dead ends")
The motivation behind that change was that Peter was planning on using
UD2 for __WARN(), which is *not* a dead end. However, it turns out
that some emulators rely on UD2 being fatal, so he ended up using
'ud0' instead:
9a93848fe787 ("x86/debug: Implement __WARN() using UD0")
For GCC 4.5+, it should be safe to go back to the previous assumption
that UD2 is fatal, even when it's not annotated with unreachable().
But for pre-4.5 versions of GCC, the unreachable() macro isn't
supported, so such cases of UD2 need to be explicitly annotated as
reachable.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: d1091c7fa3d5 ("objtool: Improve detection of BUG() and other dead ends")
Link: http://lkml.kernel.org/r/e57fa9dfede25f79487da8126ee9cdf7b856db65.1501188854.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Objtool tries to silence 'unreachable instruction' warnings when it
detects gcov is enabled, because gcov produces a lot of unreachable
instructions and they don't really matter.
However, the 0-day bot is still reporting some unreachable instruction
warnings with CONFIG_GCOV_KERNEL=y on GCC 4.6.4.
As it turns out, objtool's gcov detection doesn't work with older
versions of GCC because they don't create a bunch of symbols with the
'gcov.' prefix like newer versions of GCC do.
Move the gcov check out of objtool and instead just create a new
'--no-unreachable' flag which can be passed in by the kernel Makefile
when CONFIG_GCOV_KERNEL is defined.
Also rename the 'nofp' variable to 'no_fp' for consistency with the new
'no_unreachable' variable.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 9cfffb116887 ("objtool: Skip all "unreachable instruction" warnings for gcov kernels")
Link: http://lkml.kernel.org/r/c243dc78eb2ffdabb6e927844dea39b6033cd395.1500939244.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Some asm (and inline asm) code does special things to the stack which
objtool can't understand. (Nor can GCC or GNU assembler, for that
matter.) In such cases we need a facility for the code to provide
annotations, so the unwinder can unwind through it.
This provides such a facility, in the form of unwind hints. They're
similar to the GNU assembler .cfi* directives, but they give more
information, and are needed in far fewer places, because objtool can
fill in the blanks by following branches and adjusting the stack pointer
for pushes and pops.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/0f5f3c9104fca559ff4088bece1d14ae3bca52d5.1499786555.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Now that objtool knows the states of all registers on the stack for each
instruction, it's straightforward to generate debuginfo for an unwinder
to use.
Instead of generating DWARF, generate a new format called ORC, which is
more suitable for an in-kernel unwinder. See
Documentation/x86/orc-unwinder.txt for a more detailed description of
this new debuginfo format and why it's preferable to DWARF.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/c9b9f01ba6c5ed2bdc9bb0957b78167fdbf9632e.1499786555.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
With some configs, objtool reports the following warning:
arch/x86/kernel/ftrace.o: warning: objtool: ftrace_modify_code_direct()+0x2d: sibling call from callable instruction with modified stack frame
The instruction it's complaining about isn't actually a sibling call.
It's just a normal jump to an address inside the function. Objtool
thought it was a sibling call because the instruction's jump_dest wasn't
initialized because the function was supposed to be ignored due to its
use of sync_core().
Objtool ended up validating the function instead of ignoring it because
it didn't properly recognize a sibling call to the function. So fix the
sibling call logic. Also add a warning to catch ignored functions being
validated so we'll get a more useful error message next time.
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/96cc8ecbcdd8cb29ddd783817b4af918a6a171b0.1499437107.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"Most of the changes are for tooling, the main changes in this cycle were:
- Improve Intel-PT hardware tracing support, both on the kernel and
on the tooling side: PTWRITE instruction support, power events for
C-state tracing, etc. (Adrian Hunter)
- Add support to measure SMI cost to the x86 architecture, with
tooling support in 'perf stat' (Kan Liang)
- Support function filtering in 'perf ftrace', plus related
improvements (Namhyung Kim)
- Allow adding and removing fields to the default 'perf script'
columns, using + or - as field prefixes to do so (Andi Kleen)
- Allow resolving the DSO name with 'perf script -F brstack{sym,off},dso'
(Mark Santaniello)
- Add perf tooling unwind support for PowerPC (Paolo Bonzini)
- ... and various other improvements as well"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (84 commits)
perf auxtrace: Add CPU filter support
perf intel-pt: Do not use TSC packets for calculating CPU cycles to TSC
perf intel-pt: Update documentation to include new ptwrite and power events
perf intel-pt: Add example script for power events and PTWRITE
perf intel-pt: Synthesize new power and "ptwrite" events
perf intel-pt: Move code in intel_pt_synth_events() to simplify attr setting
perf intel-pt: Factor out intel_pt_set_event_name()
perf intel-pt: Tidy messages into called function intel_pt_synth_event()
perf intel-pt: Tidy Intel PT evsel lookup into separate function
perf intel-pt: Join needlessly wrapped lines
perf intel-pt: Remove unused instructions_sample_period
perf intel-pt: Factor out common code synthesizing event samples
perf script: Add synthesized Intel PT power and ptwrite events
perf/x86/intel: Constify the 'lbr_desc[]' array and make a function static
perf script: Add 'synth' field for synthesized event payloads
perf auxtrace: Add itrace option to output power events
perf auxtrace: Add itrace option to output ptwrite events
tools include: Add byte-swapping macros to kernel.h
perf script: Add 'synth' event type for synthesized events
x86/insn: perf tools: Add new ptwrite instruction
...
|
|
Previously, objtool ignored functions which have the IRET instruction
in them. That's because it assumed that such functions know what
they're doing with respect to frame pointers.
With the new "objtool 2.0" changes, it stopped ignoring such functions,
and started complaining about them:
arch/x86/kernel/alternative.o: warning: objtool: do_sync_core()+0x1b: unsupported instruction in callable function
arch/x86/kernel/alternative.o: warning: objtool: text_poke()+0x1a8: unsupported instruction in callable function
arch/x86/kernel/ftrace.o: warning: objtool: do_sync_core()+0x16: unsupported instruction in callable function
arch/x86/kernel/cpu/mcheck/mce.o: warning: objtool: machine_check_poll()+0x166: unsupported instruction in callable function
arch/x86/kernel/cpu/mcheck/mce.o: warning: objtool: do_machine_check()+0x147: unsupported instruction in callable function
Silence those warnings for now. They can be re-enabled later, once we
have unwind hints which will allow the code to annotate the IRET usages.
Reported-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Fixes: baa41469a7b9 ("objtool: Implement stack validation 2.0")
Link: http://lkml.kernel.org/r/20170630140934.mmwtpockvpupahro@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This is a major rewrite of objtool. Instead of only tracking frame
pointer changes, it now tracks all stack-related operations, including
all register saves/restores.
In addition to making stack validation more robust, this also paves the
way for undwarf generation.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/678bd94c0566c6129bcc376cddb259c4c5633004.1498659915.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
In preparation for the new 'objtool undwarf generate' command, which
will rely on 'objtool check', move the checking code from
builtin-check.c to check.c where it can be used by other commands.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Jiri Slaby <jslaby@suse.cz>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: live-patching@vger.kernel.org
Link: http://lkml.kernel.org/r/294c5c695fd73c1a5000bbe5960a7c9bec4ee6b4.1498659915.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Add ptwrite to the op code map and the perf tools new instructions test.
To run the test:
$ tools/perf/perf test "x86 ins"
39: Test x86 instruction decoder - new instructions : Ok
Or to see the details:
$ tools/perf/perf test -v "x86 ins" 2>&1 | grep ptwrite
For information about ptwrite, refer the Intel SDM.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: http://lkml.kernel.org/r/1495180230-19367-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
CONFIG_FORTIFY_SOURCE=y implements fortify_panic() as a __noreturn function,
so objtool needs to know about it too.
Suggested-by: Daniel Micay <danielmicay@gmail.com>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1497532835-32704-1-git-send-email-jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
And with the goodies present in the kernel.h counterpart, i.e. checking
that the parameter is an array at build time.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-roiwxwgwgld4kygn65if60wa@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Arnd Bergmann reported a (false positive) objtool warning:
drivers/infiniband/sw/rxe/rxe_resp.o: warning: objtool: rxe_responder()+0xfe: sibling call from callable instruction with changed frame pointer
The issue is in find_switch_table(). It tries to find a switch
statement's jump table by walking backwards from an indirect jump
instruction, looking for a relocation to the .rodata section. In this
case it stopped walking prematurely: the first .rodata relocation it
encountered was for a variable (resp_state_name) instead of a jump
table, so it just assumed there wasn't a jump table.
The fix is to ignore any .rodata relocation which refers to an ELF
object symbol. This works because the jump tables are anonymous and
have no symbols associated with them.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 3732710ff6f2 ("objtool: Improve rare switch jump table pattern detection")
Link: http://lkml.kernel.org/r/20170302225723.3ndbsnl4hkqbne7a@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The '__unreachable' and '__func_stack_frame_non_standard' sections are
only used at compile time. They're discarded for vmlinux but they
should also be discarded for modules.
Since this is a recurring pattern, prefix the section names with
".discard.". It's a nice convention and vmlinux.lds.h already discards
such sections.
Also remove the 'a' (allocatable) flag from the __unreachable section
since it doesn't make sense for a discarded section.
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jessica Yu <jeyu@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: d1091c7fa3d5 ("objtool: Improve detection of BUG() and other dead ends")
Link: http://lkml.kernel.org/r/20170301180444.lhd53c5tibc4ns77@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The BUG() macro's use of __builtin_unreachable() via the unreachable()
macro tells gcc that the instruction is a dead end, and that it's safe
to assume the current code path will not execute past the previous
instruction.
On x86, the BUG() macro is implemented with the 'ud2' instruction. When
objtool's branch analysis sees that instruction, it knows the current
code path has come to a dead end.
Peter Zijlstra has been working on a patch to change the WARN macros to
use 'ud2'. That patch will break objtool's assumption that 'ud2' is
always a dead end.
Generally it's best for objtool to avoid making those kinds of
assumptions anyway. The more ignorant it is of kernel code internals,
the better.
So create a more generic way for objtool to detect dead ends by adding
an annotation to the unreachable() macro. The annotation stores a
pointer to the end of the unreachable code path in an '__unreachable'
section. Objtool can read that section to find the dead ends.
Tested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/41a6d33971462ebd944a1c60ad4bf5be86c17b77.1487712920.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The IRET opcode is 0xcf according to the Intel manual and also to objdump of my
vmlinux:
1ea8: 48 cf iretq
Fix the opcode in arch_decode_instruction().
The previous value (0xc5) seems to correspond to LDS.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20170118132921.19319-1-jslaby@suse.cz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild
Pull kbuild updates from Michal Marek:
- prototypes for x86 asm-exported symbols (Adam Borowski) and a warning
about missing CRCs (Nick Piggin)
- asm-exports fix for LTO (Nicolas Pitre)
- thin archives improvements (Nick Piggin)
- linker script fix for CONFIG_LD_DEAD_CODE_DATA_ELIMINATION (Nick
Piggin)
- genksyms support for __builtin_va_list keyword
- misc minor fixes
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
x86/kbuild: enable modversions for symbols exported from asm
kbuild: fix scripts/adjust_autoksyms.sh* for the no modules case
scripts/kallsyms: remove last remnants of --page-offset option
make use of make variable CURDIR instead of calling pwd
kbuild: cmd_export_list: tighten the sed script
kbuild: minor improvement for thin archives build
kbuild: modpost warn if export version crc is missing
kbuild: keep data tables through dead code elimination
kbuild: improve linker compatibility with lib-ksyms.o build
genksyms: Regenerate parser
kbuild/genksyms: handle va_list type
kbuild: thin archives for multi-y targets
kbuild: kallsyms allow 3-pass generation if symbols size has changed
|
|
make already provides the current working directory in a variable, so make
use of it instead of forking a shell. Also replace usage of PWD by
CURDIR. PWD is provided by most shells, but not all, so this makes the
build system more robust.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michal Marek <mmarek@suse.com>
|
|
For the "lea %(rsp), %rbp" case, we check if there is a rex_prefix.
But we check 'bytes' which is insn_byte_t[4] in rex_prefix (insn_field
structure). Therefore, the check is always true.
Instead, check 'nbytes' which is the right one.
Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20161205105551.25917-1-jslaby@suse.cz
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
The following commit:
3732710ff6f2 ("objtool: Improve rare switch jump table pattern detection")
... improved objtool's ability to detect GCC switch statement jump
tables for GCC 6. However the check to allow short jumps with the
scanned range of instructions wasn't quite right. The pattern detection
should allow jumps to the indirect jump instruction itself.
This fixes the following warning:
drivers/infiniband/sw/rxe/rxe_comp.o: warning: objtool: rxe_completer()+0x315: sibling call from callable instruction with changed frame pointer
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 3732710ff6f2 ("objtool: Improve rare switch jump table pattern detection")
Link: http://lkml.kernel.org/r/20161026153408.2rifnw7bvoc5sex7@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Recently objtool has started reporting a few "unreachable instruction"
warnings when CONFIG_GCOV is enabled for newer versions of GCC. Usually
this warning means there's some new control flow that objtool doesn't
understand. But in this case, objtool is correct and the instructions
really are inaccessible. It's an annoying quirk of gcov, but it's
harmless, so it's ok to just silence the warnings.
With older versions of GCC, it was relatively easy to detect
gcov-specific instructions and to skip any unreachable warnings produced
by them. But GCC 6 has gotten craftier.
Instead of continuing to play whack-a-mole with gcov, just use a bigger,
more permanent hammer and disable unreachable warnings for the whole
file when gcov is enabled. This is fine to do because a) unreachable
warnings are usually of questionable value; and b) gcov isn't used for
production kernels and we can relax the checks a bit there.
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/38d5c87d61d9cd46486dd2c86f46603dff0df86f.1476393584.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
GCC 6 added a new switch statement jump table optimization which makes
objtool's life harder. It looks like:
mov [rodata addr],%reg1
... some instructions ...
jmpq *(%reg1,%reg2,8)
The optimization is quite rare, but objtool still needs to be able to
identify the pattern so that it can follow all possible control flow
paths related to the switch statement.
In order to detect the pattern, objtool starts from the indirect jump
and scans backwards through the function until it finds the first
instruction in the pattern. If it encounters an unconditional jump
along the way, it stops and considers the pattern to be not found.
As it turns out, unconditional jumps can happen, as long as they are
small forward jumps within the range being scanned.
This fixes the following warnings:
drivers/infiniband/sw/rxe/rxe_comp.o: warning: objtool: rxe_completer()+0x2f4: sibling call from callable instruction with changed frame pointer
drivers/infiniband/sw/rxe/rxe_resp.o: warning: objtool: rxe_responder()+0x10f: sibling call from callable instruction with changed frame pointer
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/8a9ed68ae1780e8d3963e4ee13f2f257fe3a3c33.1476393584.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
Arnd reported that enabling CONFIG_MATOM results in a bunch of objtool
false positive frame pointer warnings:
arch/x86/events/intel/ds.o: warning: objtool: intel_pmu_pebs_del()+0x43: call without frame pointer save/setup
security/keys/keyring.o: warning: objtool: keyring_read()+0x59: call without frame pointer save/setup
kernel/signal.o: warning: objtool: __dequeue_signal()+0xd8: call without frame pointer save/setup
...
objtool gets confused by the fact that the '-mtune=atom' GCC option
sometimes uses 'lea (%rsp),%rbp' instead of 'mov %rsp,%rbp'. The
instructions are effectively the same, but objtool doesn't know about
the 'lea' variant.
Fix the false warnings by adding support for 'lea (%rsp),%rbp' in the
objtool decoder.
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
objtool reports the following new warning:
kernel/exit.o: warning: objtool: do_exit() falls through to next function complete_and_exit()
The warning is caused by do_exit()'s new call to do_task_dead(), which
is a new "noreturn" function which objtool doesn't know about yet,
introduced by:
9af6528ee9b6 ("sched/core: Optimize __schedule()")
( objtool has to know all the global noreturn functions so it can follow
the control flow of any functions which call them. Unfortunately they
need to be hard-coded because there's no automated way to detect them. )
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: kbuild-all@01.org
Cc: tipbuild@zytor.com
Link: http://lkml.kernel.org/r/20160922212125.zbuewckqll4yur25@treble
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc fixes from Thomas Gleixner:
"This update contains:
- a fix for stomp-machine so the nmi_watchdog wont trigger on the cpu
waiting for the others to execute the callback
- various fixes and updates to objtool including an resync of the
instruction decoder to match the kernel's decoder"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Un-capitalize "Warning" for out-of-sync instruction decoder
objtool: Resync x86 instruction decoder with the kernel's
objtool: Support new GCC 6 switch jump table pattern
stop_machine: Touch_nmi_watchdog() after MULTI_STOP_PREPARE
objtool: Add 'fixdep' to objtool/.gitignore
|
|
Change "Warning" to "warning" to make it look more like a GCC warning.
Hopefully that will be enough to help the 0-day bot or other automated
tools catch this warning earlier before it ends up in Linus's tree.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/b1669f391a5db91040427fd9f8e1e79db18f9709.1469751119.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This fixes the following warning:
Warning: objtool: x86 instruction decoder differs from kernel
Unfortunately we have three identical copies of the x86 instruction
decoder in the kernel tree that have to be manually kept in sync.
It's on my TODO list to at least library-ize the ones in the tools
subdir so we'd only have two of them instead of three. In the meantime,
here's another manual sync.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: c61f4d5ebaf0 ("perf tools: Add AVX-512 support to the instruction decoder used by Intel PT")
Link: http://lkml.kernel.org/r/d7f74b4d91fed25b0be33cd5c86f5131fa1a7529.1469751119.git.jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
