| Age | Commit message (Collapse) | Author |
|---|
|
disentangle headers
Some places were including event.h just to get 'struct perf_sample',
move it to a separate place so that we speed up a bit the build.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Instead of printing "(first line may be sliced)", always remove the
first line of the debug log if the buffer has wrapped when dumping on
error.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220905073424.3971-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Pass d+e option and log size via intel_pt_log_enable(). Allocate a buffer
for log messages and provide intel_pt_log_dump_buf() to dump and reset the
buffer upon decoder errors.
Example:
$ sudo perf record -e intel_pt// sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.094 MB perf.data ]
$ sudo perf config itrace.debug-log-buffer-size=300
$ sudo perf script --itrace=ed+e+o | head -20
Dumping debug log buffer (first line may be sliced)
Other
ffffffff96ca22f6: 48 89 e5 Other
ffffffff96ca22f9: 65 48 8b 05 ff e0 38 69 Other
ffffffff96ca2301: 48 3d c0 a5 c1 98 Other
ffffffff96ca2307: 74 08 Jcc +8
ffffffff96ca2311: 5d Other
ffffffff96ca2312: c3 Ret
ERROR: Bad RET compression (TNT=N) at 0xffffffff96ca2312
End of debug log buffer dump
instruction trace error type 1 time 15913.537143482 cpu 5 pid 36292 tid 36292 ip 0xffffffff96ca2312 code 6: Trace doesn't match instruction
Dumping debug log buffer (first line may be sliced)
Other
ffffffff96ce7fe9: f6 47 2e 20 Other
ffffffff96ce7fed: 74 11 Jcc +17
ffffffff96ce7fef: 48 8b 87 28 0a 00 00 Other
ffffffff96ce7ff6: 5d Other
ffffffff96ce7ff7: 48 8b 40 18 Other
ffffffff96ce7ffb: c3 Ret
ERROR: Bad RET compression (TNT=N) at 0xffffffff96ce7ffb
Warning:
8 instruction trace errors
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Reviewed-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220905073424.3971-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
ptwrite is an Intel x86 instruction that writes arbitrary values into an
Intel PT trace. It is not supported on all hardware, so provide an
alternative that makes use of TNT packets to convey the payload data.
TNT packets encode Taken/Not-taken conditional branch information, so
taking branches based on the payload value will encode the value into
the TNT packet. Refer to the changes to the documentation file
perf-intel-pt.txt in this patch for an example.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220509152400.376613-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
As of Intel SDM (https://www.intel.com/sdm) version 076, there is a new
Intel PT feature called Event Trace which adds a bit to the existing
MODE.Exec packet to record the interrupt flag.
Previously, the MODE.Exec packet did not generate any events, so the
new processing required is practically the same as a new packet.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
processing
As of Intel SDM (https://www.intel.com/sdm) version 076, there is a new
Intel PT feature called Event Trace which requires 2 new packets CFE
(Control Flow Event) and EVD (Event Data).
Each Event Trace event is represented by a CFE packet that is preceded
by zero or more EVD packets. It may be bound to a following FUP (Flow
Update) packet that provides the IP.
Event Trace exposes details about asynchronous events. The CFE packet
contains a type field to identify one of the following:
1 INTR interrupt, fault, exception, NMI
2 IRET interrupt return
3 SMI system management interrupt
4 RSM resume from system management mode
5 SIPI startup interprocessor interrupt
6 INIT INIT signal
7 VMENTRY VM-Entry
8 VMEXIT VM-Entry
9 VMEXIT_INTR VM-Exit due to interrupt
10 SHUTDOWN Shutdown
For more details, refer to the Intel SDM, Intel Processor Trace chapter.
Add processing to the decoder for the new packets.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Factor out clearing of FUP (Flow Update) event variables, to avoid code duplication.
Committer Notes:
From the Intel documentation:
<quote>
Flow Update Packets (FUP): FUPs provide the source IP addresses for
asynchronous events (interrupt and exceptions), as well as other cases
where the source address cannot be determined from the binary.
</quote>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
As of Intel SDM (https://www.intel.com/sdm) version 076, there is a new
Intel PT feature called Event Trace which adds a bit to the existing
MODE.Exec packet to record the interrupt flag. Amend the packet decoder and
packet decoder test accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
As of Intel SDM (https://www.intel.com/sdm) version 076, there is a new
Intel PT feature called Event Trace which requires 2 new packets CFE and
EVD. Add them to the packet decoder and packet decoder test.
Committer notes:
I got the "Intel® 64 and IA-32 architectures software developer’s manual
combined volumes: 1, 2A, 2B, 2C, 2D, 3A, 3B, 3C, 3D, and 4" PDF at:
https://cdrdv2.intel.com/v1/dl/getContent/671200
And these new packets are described in page 3951:
<quote>
32.2.4
Event Trace is a capability that exposes details about the asynchronous
events, when they are generated, and when their corresponding software
event handler completes execution. These include:
o Interrupts, including NMI and SMI, including the interrupt vector when
defined.
o Faults, exceptions including the fault vector.
— Page faults additionally include the page fault address, when in context.
o Event handler returns, including IRET and RSM.
o VM exits and VM entries.¹
— VM exits include the values written to the “exit reason” and “exit qualification” VMCS fields.
INIT and SIPI events.
o TSX aborts, including the abort status returned for the RTM instructions.
o Shutdown.
Additionally, it provides indication of the status of the Interrupt Flag
(IF), to indicate when interrupts are masked.
</quote>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Minor whitespace fix up.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20220124084201.2699795-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
FUP packets contain IP information, which makes them also an 'instruction'
event in 'hop' mode i.e. the itrace 'q' option. That wasn't happening, so
restructure the logic so that FUP events are added along with appropriate
'instruction' and 'branch' events.
Fixes: 7c1b16ba0e26e6 ("perf intel-pt: Add support for decoding FUP/TIP only")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Code after label 'next:' in intel_pt_walk_trace() assumes 'err' is zero,
but it may not be, if arrived at via a 'goto'. Ensure it is zero.
Fixes: 7c1b16ba0e26e6 ("perf intel-pt: Add support for decoding FUP/TIP only")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
An overflow (OVF packet) is treated as an error because it represents a
loss of trace data, but there is no loss of synchronization, so the packet
state should be INTEL_PT_STATE_IN_SYNC not INTEL_PT_STATE_ERR_RESYNC.
To support that, some additional variables must be reset, and the FUP
packet that may follow OVF is treated as an FUP event.
Fixes: f4aa081949e7b6 ("perf tools: Add Intel PT decoder")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
intel_pt_fup_event() assumes it can overwrite the state type if there has
been an FUP event, but this is an unnecessary and unexpected constraint on
callers.
Fix by touching only the state type flags that are affected by an FUP
event.
Fixes: a472e65fc490a ("perf intel-pt: Add decoder support for ptwrite and power event packets")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When syncing, it may be that branch packet generation is not enabled at
that point, in which case there will not immediately be a control-flow
packet, so some packets before a control flow packet turns up, get
ignored. However, the decoder is in sync as soon as a PSB is found, so
the state should be set accordingly.
Fixes: f4aa081949e7b6 ("perf tools: Add Intel PT decoder")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
usage
Packet generation enable (PGE) refers to whether control flow (COFI)
packets are being produced.
PGE may be false even when branch-tracing is enabled, due to being
out-of-context, or outside a filter address range. Fix some missing PGE
usage.
Fixes: 7c1b16ba0e26e6 ("perf intel-pt: Add support for decoding FUP/TIP only")
Fixes: 839598176b0554 ("perf intel-pt: Allow decoding with branch tracing disabled")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Switch from the libc-defined __BYTE_ORDER to the compiler-defined
__BYTE_ORDER__ in order to make endianness detection more robust, like
it was done for libbpf.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20211104132311.984703-1-iii@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up some tools/perf/ patches that went via tip/perf/core, such
as:
tools/perf: Add mem_hops field in perf_mem_data_src structure
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
It can be useful to see debug output in between normal output.
Add support for AUXTRACE_LOG_FLG_USE_STDOUT to Intel PT.
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20211027080334.365596-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Normally, for cycle-acccurate mode, IPC values are an exact number of
instructions and cycles. Due to the granularity of timestamps, that happens
only when a CYC packet correlates to the event.
Support the itrace 'A' option, to use instead, the number of cycles
associated with the current timestamp. This provides IPC information for
every change of timestamp, but at the expense of accuracy. Due to the
granularity of timestamps, the actual number of cycles increases even
though the cycles reported does not. The number of instructions is known,
but if IPC is reported, cycles can be too low and so IPC is too high. Note
that inaccuracy decreases as the period of sampling increases i.e. if the
number of cycles is too low by a small amount, that becomes less
significant if the number of cycles is large.
Furthermore, it can be used in conjunction with dlfilter-show-cycles.so
to provide higher granularity cycle information.
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20211027080334.365596-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use get_unaligned() instead of memcpy() to access potentially unaligned
memory, which, when accessed through a pointer, leads to undefined
behavior. get_unaligned() describes much better what is happening there
anyway even if memcpy() does the job.
In addition, since perf tool builds with -Werror, it would fire with:
util/intel-pt-decoder/../../../arch/x86/lib/insn.c: In function '__insn_get_emulate_prefix':
tools/include/../include/asm-generic/unaligned.h:10:15: error: packed attribute is unnecessary [-Werror=packed]
10 | const struct { type x; } __packed *__pptr = (typeof(__pptr))(ptr); \
because -Werror=packed would complain if the packed attribute would have
no effect on the layout of the structure.
In this case, that is intentional so disable the warning only for that
compilation unit.
That part is Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
No functional changes.
Fixes: 5ba1071f7554 ("x86/insn, tools/x86: Fix undefined behavior due to potential unaligned accesses")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Link: https://lkml.kernel.org/r/YVSsIkj9Z29TyUjE@zn.tnic
|
|
The Intel PT decoder limits the number of unconditional branches (e.g.
jmps) decoded without consuming any trace packets. Generally, a loop
needs a conditional branch which generates a TNT packet, whereas a "ret"
instruction will generate a TIP or TNT packet. So exceeding the limit is
assumed to be a never-ending loop, which can happen if there has been a
decoding error putting the decoder at the wrong place in the code.
Up until now, the limit of 10000 has been enough but some analytic
purposes have been reported to exceed that.
Increase the limit to 100000, and make it configurable via perf config
intel-pt.max-loops. Also amend the "Never-ending loop" message to
mention the configuration entry.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20210701175132.3977-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
To pick up fixes from perf/urgent.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
When adding support for power events, some handling of FUP packets was
unified. That resulted in breaking reporting of TSX aborts, by not
considering the associated TIP packet. Fix that.
Example:
A machine that supports TSX is required. It will have flag "rtm". Kernel
parameter tsx=on may be required.
# for w in `cat /proc/cpuinfo | grep -m1 flags `;do echo $w | grep rtm ; done
rtm
Test program:
#include <stdio.h>
#include <immintrin.h>
int main()
{
int x = 0;
if (_xbegin() == _XBEGIN_STARTED) {
x = 1;
_xabort(1);
} else {
printf("x = %d\n", x);
}
return 0;
}
Compile with -mrtm i.e.
gcc -Wall -Wextra -mrtm xabort.c -o xabort
Record:
perf record -e intel_pt/cyc/u --filter 'filter main @ ./xabort' ./xabort
Before:
# perf script --itrace=be -F+flags,+addr,-period,-event --ns
xabort 1478 [007] 92161.431348552: tr strt 0 [unknown] ([unknown]) => 400b6d main+0x0 (/root/xabort)
xabort 1478 [007] 92161.431348624: jmp 400b96 main+0x29 (/root/xabort) => 400bae main+0x41 (/root/xabort)
xabort 1478 [007] 92161.431348624: return 400bb4 main+0x47 (/root/xabort) => 400b87 main+0x1a (/root/xabort)
xabort 1478 [007] 92161.431348637: jcc 400b8a main+0x1d (/root/xabort) => 400b98 main+0x2b (/root/xabort)
xabort 1478 [007] 92161.431348644: tr end call 400ba9 main+0x3c (/root/xabort) => 40f690 printf+0x0 (/root/xabort)
xabort 1478 [007] 92161.431360859: tr strt 0 [unknown] ([unknown]) => 400bae main+0x41 (/root/xabort)
xabort 1478 [007] 92161.431360882: tr end return 400bb4 main+0x47 (/root/xabort) => 401139 __libc_start_main+0x309 (/root/xabort)
After:
# perf script --itrace=be -F+flags,+addr,-period,-event --ns
xabort 1478 [007] 92161.431348552: tr strt 0 [unknown] ([unknown]) => 400b6d main+0x0 (/root/xabort)
xabort 1478 [007] 92161.431348624: tx abrt 400b93 main+0x26 (/root/xabort) => 400b87 main+0x1a (/root/xabort)
xabort 1478 [007] 92161.431348637: jcc 400b8a main+0x1d (/root/xabort) => 400b98 main+0x2b (/root/xabort)
xabort 1478 [007] 92161.431348644: tr end call 400ba9 main+0x3c (/root/xabort) => 40f690 printf+0x0 (/root/xabort)
xabort 1478 [007] 92161.431360859: tr strt 0 [unknown] ([unknown]) => 400bae main+0x41 (/root/xabort)
xabort 1478 [007] 92161.431360882: tr end return 400bb4 main+0x47 (/root/xabort) => 401139 __libc_start_main+0x309 (/root/xabort)
Fixes: a472e65fc490a ("perf intel-pt: Add decoder support for ptwrite and power event packets")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210519074515.9262-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
VM Time Correlation means determining if each TSC packet belongs to a VM
Guest or the Host. When the trace is "in context" that is indicated by
the NR flag in the PIP packet. However, when tracing kernel-only,
userspace only, or using address filters, the trace can be "out of context"
in which case timing packets are produced but not PIP packets.
Nevertheless, it is very unlikely the VM Guest timestamps will be in
the same range as the Host timestamps. Host time ranges are established
by a starting side-band event timestamp, and subsequently by the buffer
timestamp, written when the buffer is copied to the perf.data file.
This patch supports updating the VM Guest timestamp packets, assuming an
unchanging (during perf record) VMX TSC Offset and no VMX TSC scaling.
Furthermore, it is possible to determine what the VMX TSC Offset is,
although not necessarily at the start. The dry-run option lets that
information be determined so that the user can pass it to a subsequent
run. For more detail, refer to the example in the Intel PT documentation
in a subsequent patch.
VM Time Correlation is also performed on the TSC value in PEBs-via-PT
records.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210430070309.17624-12-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
A timestamp should not go backwards. If it does it is assumed that the
7-byte TSC packet value has wrapped. Improve that logic so that it will
not allow the timestamp to go past the buffer timestamp (which is recorded
when the buffer is copied out)
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210430070309.17624-11-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
VM Time Correlation will use time ranges to determine whether a TSC packet
belongs to the Host or Guest. To start, the first non-zero timestamp is
needed. Pass that to the decoder.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210430070309.17624-10-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Even when VMX TSC Offset is not changing (during perf record), different
virtual machines can have different TSC Offsets. There is a Virtual Machine
Control Structure (VMCS) for each virtual CPU, the address of which is
reported to Intel PT in the VMCS packet. We do not know which VMCS belongs
to which virtual machine, so use a tree to keep track of VMCS information.
Then the decoder will be able to use the current VMCS value to look up the
current TSC Offset.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210430070309.17624-9-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Intel PT timestamps are affected by virtualization. While TSC packets can
still be considered to be unique, the TSC values need not be in order any
more. Adjust the algorithm accordingly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210430070309.17624-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Simplify code, no functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Link: https://lkml.kernel.org/r/20210304174237.31945-20-bp@alien8.de
|
|
The PIP packet NR (non-root) flag indicates whether or not a virtual
machine is being traced (NR=1 => VM). Add support for tracking its value.
In particular note that the PIP packet (outside of PSB+) will be
associated with a TIP packet from which address the NR value takes
effect. At that point, there is a branch from_ip, to_ip with
corresponding from_nr and to_nr.
In the event of VM-Entry failure, there should still PIP and TIP packets
that can be followed in the same way.
Also note that this assumes that a host VMM is not employing VMX controls
that affect Intel PT, e.g. to hide the host from a guest using Intel PT.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Retain the PIP packet payload as is, instead of just the CR3, because it
contains also the VMX NR flag which is needed to track VM-Entry.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
In preparation to support Intel PT decoding of virtual machine traces, add
vmlaunch and vmresume as branch instructions.
Note, sample flags will show "VMentry" even if the VM-Entry fails.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Andi Kleen <ak@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210218095801.19576-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Emitting a PSB+ can cause a CPU a slight delay. When doing timing analysis
of code with Intel PT, it is useful to know if a timing bubble was caused
by Intel PT or not. Add reporting of PSB events via perf script. PSB
events are printed with the existing itrace 'p' option which also prints
power and frequency changes. The PSB event contains the trace offset at
which the PSB occurs, to allow easy reference back to the PSB+ packets.
The PSB event timestamp is always the timestamp from the PSB+ TSC
packet, and the ip is always the address from the PSB+ FUP packet.
The code changes are non-trivial because the decoder must walk to the
PSB+ FUP address before outputting the PSB event.
Example:
$ perf record -e intel_pt/cyc,psb_period=0/u uname
Linux
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.046 MB perf.data ]
$ perf script --itrace=p --ns
perf 17981 [006] 25617.510820383: psb: psb offs: 0 0 [unknown] ([unknown])
perf 17981 [006] 25617.510820383: cbr: cbr: 42 freq: 4219 MHz (156%) 0 [unknown] ([unknown])
uname 17981 [006] 25617.510889753: psb: psb offs: 0xb50 7f78c12a212e __GI___tunables_init+0xee (/usr/lib/x86_64-linux-gnu/ld-2.31.so)
uname 17981 [006] 25617.510899162: psb: psb offs: 0x12d0 7f78c128af1c dl_main+0x93c (/usr/lib/x86_64-linux-gnu/ld-2.31.so)
uname 17981 [006] 25617.510939242: psb: psb offs: 0x1a50 7f78c128eefc _dl_map_object_from_fd+0x13c (/usr/lib/x86_64-linux-gnu/ld-2.31.so)
uname 17981 [006] 25617.510981274: psb: psb offs: 0x21c8 7f78c1296307 _dl_relocate_object+0x927 (/usr/lib/x86_64-linux-gnu/ld-2.31.so)
uname 17981 [006] 25617.510993034: psb: psb offs: 0x2948 7f78c12940e4 _dl_lookup_symbol_x+0x14 (/usr/lib/x86_64-linux-gnu/ld-2.31.so)
uname 17981 [006] 25617.511003871: psb: psb offs: 0x30c8 7f78c12937b3 do_lookup_x+0x2f3 (/usr/lib/x86_64-linux-gnu/ld-2.31.so)
uname 17981 [006] 25617.511019854: psb: psb offs: 0x3850 7f78c1295eed _dl_relocate_object+0x50d (/usr/lib/x86_64-linux-gnu/ld-2.31.so)
uname 17981 [006] 25617.511029015: psb: psb offs: 0x4390 7f78c12a855a strcmp+0xf6a (/usr/lib/x86_64-linux-gnu/ld-2.31.so)
uname 17981 [006] 25617.511064876: psb: psb offs: 0x4b10 0 [unknown] ([unknown])
uname 17981 [006] 25617.511080762: psb: psb offs: 0x5290 7f78c11db53d _dl_addr+0x13d (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
uname 17981 [006] 25617.511086035: psb: psb offs: 0x5a08 7f78c11db538 _dl_addr+0x138 (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
uname 17981 [006] 25617.511091381: psb: psb offs: 0x6190 7f78c11db534 _dl_addr+0x134 (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
uname 17981 [006] 25617.511096681: psb: psb offs: 0x6910 7f78c11db4c3 _dl_addr+0xc3 (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
uname 17981 [006] 25617.511119520: psb: psb offs: 0x7090 7f78c10ada5e _nl_intern_locale_data+0x12e (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
uname 17981 [006] 25617.511126584: psb: psb offs: 0x7818 7f78c10ada50 _nl_intern_locale_data+0x120 (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
uname 17981 [006] 25617.511132775: psb: psb offs: 0x8358 7f78c10c20c0 getenv+0xa0 (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
uname 17981 [006] 25617.511134598: psb: psb offs: 0x8ad0 7f78c10ada09 _nl_intern_locale_data+0xd9 (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
uname 17981 [006] 25617.511135685: psb: psb offs: 0x9258 7f78c10ada50 _nl_intern_locale_data+0x120 (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
uname 17981 [006] 25617.511138322: psb: psb offs: 0x99d0 7f78c11fffd9 __strncmp_avx2+0x39 (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
uname 17981 [006] 25617.511158907: psb: psb offs: 0xa150 0 [unknown] ([unknown])
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210205175350.23817-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The code assumed every CYC-eligible packet has a CYC packet, which is not
the case when CYC thresholds are used. Fix by checking if a CYC packet is
actually present in that case.
Fixes: 5b1dc0fd1da06 ("perf intel-pt: Add support for samples to contain IPC ratio")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210205175350.23817-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The code assumed a change in cycle count means accurate IPC. That is not
correct, for example when sampling both branches and instructions, or at
a FUP packet (which is not CYC-eligible) address. Fix by using an explicit
flag to indicate when IPC can be sampled.
Fixes: 5b1dc0fd1da06 ("perf intel-pt: Add support for samples to contain IPC ratio")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: linux-kernel@vger.kernel.org
Link: https://lore.kernel.org/r/20210205175350.23817-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Add missing CYC packet processing when walking through PSB+. This
improves the accuracy of timestamps that follow PSB+, until the next
MTC.
Fixes: 3d49807870f08 ("perf tools: Add new Intel PT packet definitions")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20210205175350.23817-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
A single q option decodes ip from only FUP/TIP packets. Make it so that
repeating the q option (i.e. qq) decodes only PSB+, getting ip if there
is a FUP packet within PSB+ (i.e. between PSB and PSBEND).
Example:
$ perf record -e intel_pt//u grep -rI pudding drivers
[ perf record: Woken up 52 times to write data ]
[ perf record: Captured and wrote 57.870 MB perf.data ]
$ time perf script --itrace=bi | wc -l
58948289
real 1m23.863s
user 1m23.251s
sys 0m7.452s
$ time perf script --itrace=biq | wc -l
3385694
real 0m4.453s
user 0m4.455s
sys 0m0.328s
$ time perf script --itrace=biqq | wc -l
1883
real 0m0.047s
user 0m0.043s
sys 0m0.009s
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200710151104.15137-13-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Use the new itrace 'q' option to add support for a mode of decoding that
ignores TNT, does not walk object code, but gets the ip from FUP and TIP
packets.
Example:
$ perf record -e intel_pt//u grep -rI pudding drivers
[ perf record: Woken up 52 times to write data ]
[ perf record: Captured and wrote 57.870 MB perf.data ]
$ time perf script --itrace=bi | wc -l
58948289
real 1m23.863s
user 1m23.251s
sys 0m7.452s
$ time perf script --itrace=biq | wc -l
3385694
real 0m4.453s
user 0m4.455s
sys 0m0.328s
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20200710151104.15137-12-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
CBR events can result in a duplicate branch event, because the state
type defaults to a branch. Fix by clearing the state type.
Example: trace 'sleep' and hope for a frequency change
Before:
$ perf record -e intel_pt//u sleep 0.1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.034 MB perf.data ]
$ perf script --itrace=bpe > before.txt
After:
$ perf script --itrace=bpe > after.txt
$ diff -u before.txt after.txt
--- before.txt 2020-07-07 14:42:18.191508098 +0300
+++ after.txt 2020-07-07 14:42:36.587891753 +0300
@@ -29673,7 +29673,6 @@
sleep 93431 [007] 15411.619905: 1 branches:u: 0 [unknown] ([unknown]) => 7f0818abb2e0 clock_nanosleep@@GLIBC_2.17+0x0 (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
sleep 93431 [007] 15411.619905: 1 branches:u: 7f0818abb30c clock_nanosleep@@GLIBC_2.17+0x2c (/usr/lib/x86_64-linux-gnu/libc-2.31.so) => 0 [unknown] ([unknown])
sleep 93431 [007] 15411.720069: cbr: cbr: 15 freq: 1507 MHz ( 56%) 7f0818abb30c clock_nanosleep@@GLIBC_2.17+0x2c (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
- sleep 93431 [007] 15411.720069: 1 branches:u: 7f0818abb30c clock_nanosleep@@GLIBC_2.17+0x2c (/usr/lib/x86_64-linux-gnu/libc-2.31.so) => 0 [unknown] ([unknown])
sleep 93431 [007] 15411.720076: 1 branches:u: 0 [unknown] ([unknown]) => 7f0818abb30e clock_nanosleep@@GLIBC_2.17+0x2e (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
sleep 93431 [007] 15411.720077: 1 branches:u: 7f0818abb323 clock_nanosleep@@GLIBC_2.17+0x43 (/usr/lib/x86_64-linux-gnu/libc-2.31.so) => 7f0818ac0eb7 __nanosleep+0x17 (/usr/lib/x86_64-linux-gnu/libc-2.31.so)
sleep 93431 [007] 15411.720077: 1 branches:u: 7f0818ac0ebf __nanosleep+0x1f (/usr/lib/x86_64-linux-gnu/libc-2.31.so) => 55cb7e4c2827 rpl_nanosleep+0x97 (/usr/bin/sleep)
Fixes: 91de8684f1cff ("perf intel-pt: Cater for CBR change in PSB+")
Fixes: abe5a1d3e4bee ("perf intel-pt: Decoder to output CBR changes immediately")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200710151104.15137-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
While walking code towards a FUP ip, the packet state is
INTEL_PT_STATE_FUP or INTEL_PT_STATE_FUP_NO_TIP. That was mishandled
resulting in the state becoming INTEL_PT_STATE_IN_SYNC prematurely. The
result was an occasional lost EXSTOP event.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20200710151104.15137-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Fixes coccicheck warnings:
tools/perf/builtin-diff.c:1565:2-3: Unneeded semicolon
tools/perf/builtin-lock.c:778:2-3: Unneeded semicolon
tools/perf/builtin-mem.c:126:2-3: Unneeded semicolon
tools/perf/util/intel-pt-decoder/intel-pt-pkt-decoder.c:555:2-3: Unneeded semicolon
tools/perf/util/ordered-events.c:317:2-3: Unneeded semicolon
tools/perf/util/synthetic-events.c:1131:2-3: Unneeded semicolon
tools/perf/util/trace-event-read.c:78:2-3: Unneeded semicolon
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/1588065523-71423-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Now that there's a common version of the decoder for all tools, use it
instead of the local copy.
Also use perf's check-headers.sh script to diff the decoder files to
make sure they remain in sync with the kernel version. Objtool has a
similar check.
Committer notes:
Had to keep this all pointing explicitely to x86 headers/files, i.e.
instead of asm/isnn.h we had to use ../include/asm/insn.h when the files
were in differemt dirs, or just replace "<asm/foo.h>" with "foo.h".
This way we continue to be able to process perf.data files with Intel PT
traces in distros other than x86.
Also fixed up the awk script paths to use $(srcdir)/tools/arch instead
or relative directories so that we keep detached tarballs (make help |
grep perf) working.
For now the include lines in these headers are being ignored so as not
to flag false reports of kernel/tools out of sync.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/8a37e615d2880f039505d693d1e068a009358a2b.1567118001.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
intel-pt-insn-decoder.c includes inat.c directly, so it already has an
implicit dependency on inat.c. The Build file dependency is redundant.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reviewed-by: Masami Hiramatsu <mhiramat@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/53776d6d29bc9eceb571d52df8fa32250c58a0f3.1567118001.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Remove the last unneeded use of cache.h in a header, we can check where
it is really needed, i.e. we can remove it and be sure that it isn't
being obtained indirectly.
This is an old file, used by now incorrectly in many places, so it was
providing includes needed indirectly, fixup this fallout.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-3x3l8gihoaeh7714os861ia7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
Eroding a bit more the tools/perf/util/util.h hodpodge header.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-natazosyn9rwjka25tvcnyi0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
For convenience, add the core-to-bus ratio (CBR) value to the decoder
state.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190622093248.581-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
PSB+ provides status information only so the core-to-bus ratio (CBR) in
PSB+ will not have changed from its previous value. However, cater for
the possibility of a another CBR change that gets caught up in the PSB+
anyway.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190622093248.581-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
The core-to-bus ratio (CBR) provides the CPU frequency. With branches
enabled, the decoder was outputting CBR changes only when there was a
branch. That loses the correct time of the change if the trace is not in
context (e.g. not tracing kernel space). Change to output the CBR change
immediately.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190622093248.581-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
|
PEBS data is encoded in Block Item Packets (BIP). Populate a new structure
intel_pt_blk_items with the values and, upon a Block End Packet (BEP),
report them as a new Intel PT sample type INTEL_PT_BLK_ITEMS.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/20190610072803.10456-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
|
