summaryrefslogtreecommitdiff
path: root/tools/perf
AgeCommit message (Collapse)Author
2023-10-25perf lock contention: Use per-cpu array map for spinlocksNamhyung Kim
Currently lock contention timestamp is maintained in a hash map keyed by pid. That means it needs to get and release a map element (which is proctected by spinlock!) on each contention begin and end pair. This can impact on performance if there are a lot of contention (usually from spinlocks). It used to go with task local storage but it had an issue on memory allocation in some critical paths. Although it's addressed in recent kernels IIUC, the tool should support old kernels too. So it cannot simply switch to the task local storage at least for now. As spinlocks create lots of contention and they disabled preemption during the spinning, it can use per-cpu array to keep the timestamp to avoid overhead in hashmap update and delete. In contention_begin, it's easy to check the lock types since it can see the flags. But contention_end cannot see it. So let's try to per-cpu array first (unconditionally) if it has an active element (lock != 0). Then it should be used and per-task tstamp map should not be used until the per-cpu array element is cleared which means nested spinlock contention (if any) was finished and it nows see (the outer) lock. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Hao Luo <haoluo@google.com> Cc: Song Liu <song@kernel.org> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20231020204741.1869520-3-namhyung@kernel.org
2023-10-25perf lock contention: Check race in tstamp elem creationNamhyung Kim
When pelem is NULL, it'd create a new entry with zero data. But it might be preempted by IRQ/NMI just before calling bpf_map_update_elem() then there's a chance to call it twice for the same pid. So it'd be better to use BPF_NOEXIST flag and check the return value to prevent the race. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Hao Luo <haoluo@google.com> Cc: Song Liu <song@kernel.org> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20231020204741.1869520-2-namhyung@kernel.org
2023-10-25perf lock contention: Clear lock addr after useNamhyung Kim
It checks the current lock to calculated the delta of contention time. The address is saved in the tstamp map which is allocated at begining of contention and released at end of contention. But it's possible for bpf_map_delete_elem() to fail. In that case, the element in the tstamp map kept for the current lock and it makes the next contention for the same lock tracked incorrectly. Specificially the next contention begin will see the existing element for the task and it'd just return. Then the next contention end will see the element and calculate the time using the timestamp for the previous begin. This can result in a large value for two small contentions happened from time to time. Let's clear the lock address so that it can be updated next time even if the bpf_map_delete_elem() failed. Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Ian Rogers <irogers@google.com> Cc: Hao Luo <haoluo@google.com> Cc: Song Liu <song@kernel.org> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20231020204741.1869520-1-namhyung@kernel.org
2023-10-25perf evsel: Rename evsel__increase_rlimit to rlimit__increase_nofileYang Jihong
evsel__increase_rlimit() helper does nothing with evsel, and description of the functionality is inaccurate, rename it and move to util/rlimit.c. By the way, fix a checkppatch warning about misplaced license tag: WARNING: Misplaced SPDX-License-Identifier tag - use line 1 instead #160: FILE: tools/perf/util/rlimit.h:3: /* SPDX-License-Identifier: LGPL-2.1 */ No functional change. Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Link: https://lore.kernel.org/r/20231023033144.1011896-1-yangjihong1@huawei.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-25perf bench sched pipe: Add -G/--cgroups optionNamhyung Kim
The -G/--cgroups option is to put sender and receiver in different cgroups in order to measure cgroup context switch overheads. Users need to make sure the cgroups exist and accessible. The following example should the effect of this change. Please don't forget taskset before the perf bench to measure cgroup switches properly. Otherwise each task would run on a different CPU and generate cgroup switches regardless of this change. # perf stat -e context-switches,cgroup-switches \ > taskset -c 0 perf bench sched pipe -l 10000 > /dev/null Performance counter stats for 'taskset -c 0 perf bench sched pipe -l 10000': 20,001 context-switches 2 cgroup-switches 0.053449651 seconds time elapsed 0.011286000 seconds user 0.041869000 seconds sys # perf stat -e context-switches,cgroup-switches \ > taskset -c 0 perf bench sched pipe -l 10000 -G AAA,BBB > /dev/null Performance counter stats for 'taskset -c 0 perf bench sched pipe -l 10000 -G AAA,BBB': 20,001 context-switches 20,001 cgroup-switches 0.052768627 seconds time elapsed 0.006284000 seconds user 0.046266000 seconds sys Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: https://lore.kernel.org/r/20231017202342.1353124-1-namhyung@kernel.org
2023-10-25perf test: Skip CoreSight tests if cs_etm// event is not availableMichael Petlan
CoreSight might be not available, in such case, skip the tests. Signed-off-by: Michael Petlan <mpetlan@redhat.com> Reviewed-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: Carsten Haitzler <carsten.haitzler@arm.com> Cc: vmolnaro@redhat.com Link: https://lore.kernel.org/r/20231019091137.22525-1-mpetlan@redhat.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-19perf data: Increase RLIMIT_NOFILE limit when open too many files in ↵Yang Jihong
perf_data__create_dir() If using parallel threads to collect data, perf record needs at least 6 fds per CPU. (one for sys_perf_event_open, four for pipe msg and ack of the pipe, see record__thread_data_open_pipes(), and one for open perf.data.XXX) For an environment with more than 100 cores, if perf record uses both `-a` and `--threads` options, it is easy to exceed the upper limit of the file descriptor number, when we run out of them try to increase the limits. Before: $ ulimit -n 1024 $ lscpu | grep 'On-line CPU(s)' On-line CPU(s) list: 0-159 $ perf record --threads -a sleep 1 Failed to create data directory: Too many open files After: $ ulimit -n 1024 $ lscpu | grep 'On-line CPU(s)' On-line CPU(s) list: 0-159 $ perf record --threads -a sleep 1 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.394 MB perf.data (1576 samples) ] Signed-off-by: Yang Jihong <yangjihong1@huawei.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20231013075945.698874-1-yangjihong1@huawei.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-19perf vendor events: Update PMC used in PM_RUN_INST_CMPL event for power10 ↵Kajol Jain
platform The CPI_STALL_RATIO metric group can be used to present the high level CPI stall breakdown metrics in powerpc, which will show: - DISPATCH_STALL_CPI ( Dispatch stall cycles per insn ) - ISSUE_STALL_CPI ( Issue stall cycles per insn ) - EXECUTION_STALL_CPI ( Execution stall cycles per insn ) - COMPLETION_STALL_CPI ( Completion stall cycles per insn ) Commit cf26e043c2a9 ("perf vendor events power10: Add JSON metric events to present CPI stall cycles in powerpc)" which added the CPI_STALL_RATIO metric group, also modified the PMC value used in PM_RUN_INST_CMPL event from PMC4 to PMC5, to avoid multiplexing of events. But that got revert in recent changes. Fix this issue by changing back the PMC value used in PM_RUN_INST_CMPL to PMC5. Result with the fix: ./perf stat --metric-no-group -M CPI_STALL_RATIO <workload> Performance counter stats for 'workload': 68,745,426 PM_CMPL_STALL # 0.21 COMPLETION_STALL_CPI 7,692,827 PM_ISSUE_STALL # 0.02 ISSUE_STALL_CPI 322,638,223 PM_RUN_INST_CMPL # 0.05 DISPATCH_STALL_CPI # 0.48 EXECUTION_STALL_CPI 16,858,553 PM_DISP_STALL_CYC 153,880,133 PM_EXEC_STALL 0.089774592 seconds time elapsed "--metric-no-group" is used for forcing PM_RUN_INST_CMPL to be scheduled in all group for more accuracy. Fixes: 7d473f475b2a ("perf vendor events: Move JSON/events to appropriate files for power10 platform") Reported-by: Disha Goel <disgoel@linux.vnet.ibm.com> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Disha Goel<disgoel@linux.ibm.com> Cc: maddy@linux.ibm.com Link: https://lore.kernel.org/r/20231016143110.244255-1-kjain@linux.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-19perf trace: Use the right bpf_probe_read(_str) variant for reading user dataThomas Richter
Perf test case 111 Check open filename arg using perf trace + vfs_getname fails on s390. This is caused by a failing function bpf_probe_read() in file util/bpf_skel/augmented_raw_syscalls.bpf.c. The root cause is the lookup by address. Function bpf_probe_read() is used. This function works only for architectures with ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE. On s390 is not possible to determine from the address to which address space the address belongs to (user or kernel space). Replace bpf_probe_read() by bpf_probe_read_kernel() and bpf_probe_read_str() by bpf_probe_read_user_str() to explicity specify the address space the address refers to. Output before: # ./perf trace -eopen,openat -- touch /tmp/111 libbpf: prog 'sys_enter': BPF program load failed: Invalid argument libbpf: prog 'sys_enter': -- BEGIN PROG LOAD LOG -- reg type unsupported for arg#0 function sys_enter#75 0: R1=ctx(off=0,imm=0) R10=fp0 ; int sys_enter(struct syscall_enter_args *args) 0: (bf) r6 = r1 ; R1=ctx(off=0,imm=0) R6_w=ctx(off=0,imm=0) ; return bpf_get_current_pid_tgid(); 1: (85) call bpf_get_current_pid_tgid#14 ; R0_w=scalar() 2: (63) *(u32 *)(r10 -8) = r0 ; R0_w=scalar() R10=fp0 fp-8=????mmmm 3: (bf) r2 = r10 ; R2_w=fp0 R10=fp0 ; ..... lines deleted here ..... 23: (bf) r3 = r6 ; R3_w=ctx(off=0,imm=0) R6=ctx(off=0,imm=0) 24: (85) call bpf_probe_read#4 unknown func bpf_probe_read#4 processed 23 insns (limit 1000000) max_states_per_insn 0 \ total_states 2 peak_states 2 mark_read 2 -- END PROG LOAD LOG -- libbpf: prog 'sys_enter': failed to load: -22 libbpf: failed to load object 'augmented_raw_syscalls_bpf' libbpf: failed to load BPF skeleton 'augmented_raw_syscalls_bpf': -22 .... Output after: # ./perf test -Fv 111 111: Check open filename arg using perf trace + vfs_getname : --- start --- 1.085 ( 0.011 ms): touch/320753 openat(dfd: CWD, filename: \ "/tmp/temporary_file.SWH85", \ flags: CREAT|NOCTTY|NONBLOCK|WRONLY, mode: IRUGO|IWUGO) = 3 ---- end ---- Check open filename arg using perf trace + vfs_getname: Ok # Test with the sleep command shows: Output before: # ./perf trace -e *sleep sleep 1.234567890 0.000 (1234.681 ms): sleep/63114 clock_nanosleep(rqtp: \ { .tv_sec: 0, .tv_nsec: 0 }, rmtp: 0x3ffe0979720) = 0 # Output after: # ./perf trace -e *sleep sleep 1.234567890 0.000 (1234.686 ms): sleep/64277 clock_nanosleep(rqtp: \ { .tv_sec: 1, .tv_nsec: 234567890 }, rmtp: 0x3fff3df9ea0) = 0 # Fixes: 14e4b9f4289a ("perf trace: Raw augmented syscalls fix libbpf 1.0+ compatibility") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Co-developed-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Ian Rogers <irogers@google.com> Cc: gor@linux.ibm.com Cc: hca@linux.ibm.com Cc: sumanthk@linux.ibm.com Cc: svens@linux.ibm.com Link: https://lore.kernel.org/r/20231019082642.3286650-1-tmricht@linux.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-18perf build: Generate arm64's sysreg-defs.h and add to include pathOliver Upton
Start generating sysreg-defs.h in anticipation of updating sysreg.h to a version that needs the generated output. Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20231011195740.3349631-3-oliver.upton@linux.dev Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
2023-10-18perf tools: Do not ignore the default vmlinux.hNamhyung Kim
The recent change made it possible to generate vmlinux.h from BTF and to ignore the file. But we also have a minimal vmlinux.h that will be used by default. It should not be ignored by GIT. Fixes: b7a2d774c9c5 ("perf build: Add ability to build with a generated vmlinux.h") Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Ian Rogers <irogers@google.com> Closes: https://lore.kernel.org/oe-kbuild-all/202310110451.rvdUZJEY-lkp@intel.com/ Cc: oe-kbuild-all@lists.linux.dev Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-17perf: script: fix missing ',' for fields optionChangbin Du
A comma is missed at the end of line. Signed-off-by: Changbin Du <changbin.du@huawei.com> Link: https://lore.kernel.org/r/20231017015524.797065-1-changbin.du@huawei.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-17perf tests: Fix shellcheck warning in stat_all_metricgroupsAthira Rajeev
Running shellcheck on stat_all_metricgroups.sh reports below warning: In ./tests/shell/stat_all_metricgroups.sh line 7: function ParanoidAndNotRoot() ^-- SC2112: 'function' keyword is non-standard. Delete it. As per the format, "function" is a non-standard keyword that can be used to declare functions. Fix this by removing the "function" keyword from ParanoidAndNotRoot function Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: kjain@linux.ibm.com Cc: maddy@linux.ibm.com Cc: disgoel@linux.vnet.ibm.com Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20231013073021.99794-4-atrajeev@linux.vnet.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-17perf tests: Fix shellcheck warning in record_sideband.shAthira Rajeev
Running shellcheck on record_sideband.sh throws below warning: In tests/shell/record_sideband.sh line 25: if ! perf record -o ${perfdata} -BN --no-bpf-event -C $1 true 2>&1 >/dev/null ^--^ SC2069: To redirect stdout+stderr, 2>&1 must be last (or use '{ cmd > file; } 2>&1' to clarify). This shows shellcheck warning SC2069 where the redirection order needs to be fixed. Use "cmd > /dev/null 2>&1" to fix the redirection of perf record output Fixes: 23b97c7ee963 ("perf test: Add test case for record sideband events") Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: disgoel@linux.vnet.ibm.com Link: https://lore.kernel.org/r/20231013073021.99794-3-atrajeev@linux.vnet.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-17perf tests: Ignore shellcheck warning in lock_contentionAthira Rajeev
Running shellcheck on lock_contention.sh generates below warning In tests/shell/lock_contention.sh line 36: if [ `nproc` -lt 4 ]; then ^-----^ SC2046: Quote this to prevent word splitting. Here since nproc will generate a single word output and there is no possibility of word splitting, this warning can be ignored. Use exception for this with "disable" option in shellcheck. This warning is observed after commit: "commit 29441ab3a30a ("perf test lock_contention.sh: Skip test if not enough CPUs")" Fixes: 29441ab3a30a ("perf test lock_contention.sh: Skip test if not enough CPUs") Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Reviewed-by: Kajol Jain <kjain@linux.ibm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: maddy@linux.ibm.com Cc: disgoel@linux.vnet.ibm.com Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20231013073021.99794-2-atrajeev@linux.vnet.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-17tools/perf/arch/powerpc: Fix the CPU ID const char* value by adding 0x prefixAthira Rajeev
Simple expression parser test fails in powerpc as below: 4: Simple expression parser test child forked, pid 170385 Using CPUID 004e2102 division by zero syntax error syntax error FAILED tests/expr.c:65 parse test failed test child finished with -1 Simple expression parser: FAILED! This is observed after commit: 'commit 9d5da30e4ae9 ("perf jevents: Add a new expression builtin strcmp_cpuid_str()")' With this commit, a new expression builtin strcmp_cpuid_str got added. This function takes an 'ID' type value, which is a string. So expression parse for strcmp_cpuid_str expects const char * as cpuid value type. In case of powerpc, CPU IDs are numbers. Hence it doesn't get interpreted correctly by bison parser. Example in case of power9, cpuid string returns as: 004e2102 cpuid of string type is expected in two cases: 1. char *get_cpuid_str(struct perf_pmu *pmu __maybe_unused); Testcase "tests/expr.c" uses "perf_pmu__getcpuid" which calls get_cpuid_str to get the cpuid string. 2. cpuid field in :struct pmu_events_map struct pmu_events_map { const char *arch; const char *cpuid; Here cpuid field is used in "perf_pmu__find_events_table" function as "strcmp_cpuid_str(map->cpuid, cpuid)". The value for cpuid field is picked from mapfile.csv. Fix the mapfile.csv and get_cpuid_str function to prefix cpuid with 0x so that it gets correctly interpreted by the bison parser Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com> Tested-by: Disha Goel<disgoel@linux.ibm.com> Cc: kjain@linux.ibm.com Cc: maddy@linux.ibm.com Cc: disgoel@linux.vnet.ibm.com Cc: linuxppc-dev@lists.ozlabs.org Link: https://lore.kernel.org/r/20231009050052.64935-1-atrajeev@linux.vnet.ibm.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-17perf cs-etm: Respect timestamp optionLeo Yan
When users pass the option '--timestamp' or '-T' in the record command, all events will set the PERF_SAMPLE_TIME bit in the attribution. In this case, the AUX event will record the kernel timestamp, but it doesn't mean Arm CoreSight enables timestamp packets in its hardware tracing. If the option '--timestamp' or '-T' is set, this patch always enables Arm CoreSight timestamp, as a result, the bit 28 in event's config is to be set. Before: # perf record -e cs_etm// --per-thread --timestamp -- ls # perf script --header-only ... # event : name = cs_etm//, , id = { 69 }, type = 12, size = 136, config = 0, { sample_period, sample_freq } = 1, sample_type = IP|TID|TIME|CPU|IDENTIFIER, read_format = ID|LOST, disabled = 1, enable_on_exec = 1, sample_id_all = 1, exclude_guest = 1 ... After: # perf record -e cs_etm// --per-thread --timestamp -- ls # perf script --header-only ... # event : name = cs_etm//, , id = { 49 }, type = 12, size = 136, config = 0x10000000, { sample_period, sample_freq } = 1, sample_type = IP|TID|TIME|CPU|IDENTIFIER, read_format = ID|LOST, disabled = 1, enable_on_exec = 1, sample_id_all = 1, exclude_guest = 1 ... Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: James Clark <james.clark@arm.com> Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: John Garry <john.g.garry@oracle.com> Cc: linux-arm-kernel@lists.infradead.org Cc: coresight@lists.linaro.org Link: https://lore.kernel.org/r/20231014074159.1667880-3-leo.yan@linaro.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-17perf cs-etm: Validate timestamp tracing in per-thread modeLeo Yan
So far, it's impossible to validate timestamp trace in Arm CoreSight when the perf is in the per-thread mode. E.g. for the command: perf record -e cs_etm/timestamp/ --per-thread -- ls The command enables config 'timestamp' for 'cs_etm' event in the per-thread mode. In this case, the function cs_etm_validate_config() directly bails out and skips validation. Given profiled process can be scheduled on any CPUs in the per-thread mode, this patch validates timestamp tracing for all CPUs when detect the CPU map is empty. Signed-off-by: Leo Yan <leo.yan@linaro.org> Reviewed-by: James Clark <james.clark@arm.com> Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: John Garry <john.g.garry@oracle.com> Cc: linux-arm-kernel@lists.infradead.org Cc: coresight@lists.linaro.org Link: https://lore.kernel.org/r/20231014074159.1667880-2-leo.yan@linaro.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-17perf pmu: Lazily compute default configIan Rogers
The default config is computed during creation of the PMU and may do things like scanning sysfs, when the PMU may just be used as part of scanning. Change default_config to perf_event_attr_init_default, a callback that is used when a default config needs initializing. This avoids holding onto the memory for a perf_event_attr and copying. On a tigerlake laptop running the pmu-scan benchmark: Before: Running 'internals/pmu-scan' benchmark: Computing performance of sysfs PMU event scan for 100 times Average core PMU scanning took: 28.780 usec (+- 0.503 usec) Average PMU scanning took: 283.480 usec (+- 18.471 usec) Number of openat syscalls: 30,227 After: Running 'internals/pmu-scan' benchmark: Computing performance of sysfs PMU event scan for 100 times Average core PMU scanning took: 27.880 usec (+- 0.169 usec) Average PMU scanning took: 245.260 usec (+- 15.758 usec) Number of openat syscalls: 28,914 Over 3 runs it is a nearly 12% reduction in execution time and a 4.3% of openat calls. Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: James Clark <james.clark@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Will Deacon <will@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: John Garry <john.g.garry@oracle.com> Cc: linux-arm-kernel@lists.infradead.org Cc: coresight@lists.linaro.org Link: https://lore.kernel.org/r/20231012175645.1849503-8-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-17perf pmu-events: Remember the perf_events_map for a PMUIan Rogers
strcmp_cpuid_str performs regular expression comparisons and so per CPUID linear searches over the perf_events_map are expensive. Add a helper function called map_for_pmu that does the search but also caches the map specific to a PMU. As the PMU may differ, also cache the CPUID string so that PMUs with the same CPUID string don't require the linear search and regular expression comparisons. This speeds loading PMUs as the search is done once per PMU to find the appropriate tables. Signed-off-by: Ian Rogers <irogers@google.com> Tested-by: Yang Jihong <yangjihong1@huawei.com> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: James Clark <james.clark@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: John Garry <john.g.garry@oracle.com> Cc: linux-arm-kernel@lists.infradead.org Cc: coresight@lists.linaro.org Link: https://lore.kernel.org/r/20231012175645.1849503-7-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-17perf pmu: Const-ify perf_pmu__config_termsIan Rogers
Add const to related APIs, this is so they can be used to default initialize a perf_event_attr from a const pmu. Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: James Clark <james.clark@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Will Deacon <will@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: John Garry <john.g.garry@oracle.com> Cc: linux-arm-kernel@lists.infradead.org Cc: coresight@lists.linaro.org Link: https://lore.kernel.org/r/20231012175645.1849503-6-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-17perf pmu: Const-ify file APIsIan Rogers
File APIs don't alter the struct pmu so allow const ones to be passed. Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: James Clark <james.clark@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Will Deacon <will@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: John Garry <john.g.garry@oracle.com> Cc: linux-arm-kernel@lists.infradead.org Cc: coresight@lists.linaro.org Link: https://lore.kernel.org/r/20231012175645.1849503-5-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-17perf arm-spe: Move PMU initialization from default config codeIan Rogers
Avoid setting PMU values in arm_spe_pmu_default_config, move to perf_pmu__arch_init. Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Leo Yan <leo.yan@linaro.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: James Clark <james.clark@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Will Deacon <will@kernel.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: John Garry <john.g.garry@oracle.com> Cc: linux-arm-kernel@lists.infradead.org Cc: coresight@lists.linaro.org Link: https://lore.kernel.org/r/20231012175645.1849503-4-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-17perf intel-pt: Move PMU initialization from default config codeIan Rogers
Avoid setting PMU values in intel_pt_pmu_default_config, move to perf_pmu__arch_init. Signed-off-by: Ian Rogers <irogers@google.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: James Clark <james.clark@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Will Deacon <will@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: John Garry <john.g.garry@oracle.com> Cc: linux-arm-kernel@lists.infradead.org Cc: coresight@lists.linaro.org Link: https://lore.kernel.org/r/20231012175645.1849503-3-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-17perf pmu: Rename perf_pmu__get_default_config to perf_pmu__arch_initIan Rogers
Assign default_config as part of the init. perf_pmu__get_default_config was doing more than just getting the default config and so this is intended to better align with the code. Signed-off-by: Ian Rogers <irogers@google.com> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: James Clark <james.clark@arm.com> Cc: Suzuki K Poulose <suzuki.poulose@arm.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Will Deacon <will@kernel.org> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Jing Zhang <renyu.zj@linux.alibaba.com> Cc: Kajol Jain <kjain@linux.ibm.com> Cc: Thomas Richter <tmricht@linux.ibm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: John Garry <john.g.garry@oracle.com> Cc: linux-arm-kernel@lists.infradead.org Cc: coresight@lists.linaro.org Link: https://lore.kernel.org/r/20231012175645.1849503-2-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-17perf intel-pt: Prefer get_unaligned_le64 to memcpy_le64Adrian Hunter
Use get_unaligned_le64() instead of memcpy_le64(..., 8) because it produces simpler code. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20231005190451.175568-6-adrian.hunter@intel.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-17perf intel-pt: Use get_unaligned_le16() etcAdrian Hunter
Avoid unaligned access by using get_unaligned_le16(), get_unaligned_le32() and get_unaligned_le64(). Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20231005190451.175568-5-adrian.hunter@intel.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-17perf intel-pt: Use existing definitions of le16_to_cpu() etcAdrian Hunter
Use definitions from tools/include/linux/kernel.h Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20231005190451.175568-4-adrian.hunter@intel.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-17perf intel-pt: Simplify intel_pt_get_vmcs()Adrian Hunter
Simplify and remove unnecessary constant expressions. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20231005190451.175568-3-adrian.hunter@intel.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-17perf tools: Add get_unaligned_leNN()Adrian Hunter
Add get_unaligned_le16(), get_unaligned_le32 and get_unaligned_le64, same as include/asm-generic/unaligned.h. And add include/asm-generic/unaligned.h to check-headers.sh bringing tools/include/asm-generic/unaligned.h up to date so that the kernel and tools versions match. Use diagnostic pragmas to ignore -Wpacked used by perf build. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/20231005190451.175568-2-adrian.hunter@intel.com Link: https://lore.kernel.org/r/20231010142234.20061-1-adrian.hunter@intel.com [ squashed check-header.sh addition ] Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-12perf cs-etm: Fix incorrect or missing decoder for raw traceBesar Wicaksono
The decoder creation for raw trace uses metadata from the first CPU. On per-cpu mode, this metadata is incorrectly used for every decoder. On per-process/per-thread traces, the first CPU is CPU0. If CPU0 trace is not enabled, its metadata will be marked unused and the decoder is not created. Perf report dump skips the decoding part because the decoder is missing. To fix this, use metadata of the CPU associated with sample object. Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com> Reviewed-by: James Clark <james.clark@arm.com> Cc: suzuki.poulose@arm.com Cc: mike.leach@linaro.org Cc: jonathanh@nvidia.com Cc: rwiley@nvidia.com Cc: treding@nvidia.com Cc: vsethi@nvidia.com Cc: ywan@nvidia.com Cc: linux-arm-kernel@lists.infradead.org Cc: coresight@lists.linaro.org Cc: linux-tegra@vger.kernel.org Link: https://lore.kernel.org/r/20231010234803.5419-1-bwicaksono@nvidia.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-12perf bpf_counter: Fix a few memory leaksIan Rogers
Memory leaks were detected by clang-tidy. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: llvm@lists.linux.dev Cc: Ming Wang <wangming01@loongson.cn> Cc: Tom Rix <trix@redhat.com> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20231009183920.200859-20-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-12perf header: Fix various error path memory leaksIan Rogers
Memory leaks were detected by clang-tidy. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: llvm@lists.linux.dev Cc: Ming Wang <wangming01@loongson.cn> Cc: Tom Rix <trix@redhat.com> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20231009183920.200859-19-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-12perf trace-event-info: Avoid passing NULL value to closedirIan Rogers
If opendir failed then closedir was passed NULL which is erroneous. Caught by clang-tidy. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: llvm@lists.linux.dev Cc: Ming Wang <wangming01@loongson.cn> Cc: Tom Rix <trix@redhat.com> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20231009183920.200859-18-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-12perf parse-events: Fix unlikely memory leak when cloning termsIan Rogers
Add missing free on an error path as detected by clang-tidy. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: llvm@lists.linux.dev Cc: Ming Wang <wangming01@loongson.cn> Cc: Tom Rix <trix@redhat.com> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20231009183920.200859-16-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-12perf lock: Fix a memory leak on an error pathIan Rogers
If a memory allocation fails then the strdup-ed string needs freeing. Detected by clang-tidy. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: llvm@lists.linux.dev Cc: Ming Wang <wangming01@loongson.cn> Cc: Tom Rix <trix@redhat.com> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20231009183920.200859-15-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-12perf svghelper: Avoid memory leakIan Rogers
On success path the sib_core and sib_thr values weren't being freed. Detected by clang-tidy. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: llvm@lists.linux.dev Cc: Ming Wang <wangming01@loongson.cn> Cc: Tom Rix <trix@redhat.com> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20231009183920.200859-14-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-12perf hists browser: Avoid potential NULL dereferenceIan Rogers
On other code paths browser->he_selection is NULL checked, add a missing case reported by clang-tidy. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: llvm@lists.linux.dev Cc: Ming Wang <wangming01@loongson.cn> Cc: Tom Rix <trix@redhat.com> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20231009183920.200859-13-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-12perf hists browser: Reorder variables to reduce paddingIan Rogers
Address clang-tidy warning: ``` tools/perf/ui/browsers/hists.c:2416:8: warning: Excessive padding in 'struct popup_action' (8 padding bytes, where 0 is optimal). Optimal fields order: time, thread, evsel, fn, ms, socket, rstype, ``` Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: llvm@lists.linux.dev Cc: Ming Wang <wangming01@loongson.cn> Cc: Tom Rix <trix@redhat.com> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20231009183920.200859-12-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-12perf dlfilter: Be defensive against potential NULL dereferenceIan Rogers
In the unlikely case of having a symbol without a mapping, avoid a NULL dereference that clang-tidy warns about. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: llvm@lists.linux.dev Cc: Ming Wang <wangming01@loongson.cn> Cc: Tom Rix <trix@redhat.com> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20231009183920.200859-11-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-12perf mem-events: Avoid uninitialized readIan Rogers
pmu should be initialized to NULL before perf_pmus__scan loop. Fix and shrink the scope of pmu at the same time. Issue detected by clang-tidy. Fixes: 5752c20f3787 ("perf mem: Scan all PMUs instead of just core ones") Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: llvm@lists.linux.dev Cc: Ming Wang <wangming01@loongson.cn> Cc: Tom Rix <trix@redhat.com> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20231009183920.200859-10-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-12perf jitdump: Avoid memory leakIan Rogers
jit_repipe_unwinding_info is called in a loop by jit_process_dump, avoid leaking unwinding_data by free-ing before overwriting. Error detected by clang-tidy. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: llvm@lists.linux.dev Cc: Ming Wang <wangming01@loongson.cn> Cc: Tom Rix <trix@redhat.com> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20231009183920.200859-9-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-12perf env: Remove unnecessary NULL testsIan Rogers
clang-tidy was warning: ``` util/env.c:334:23: warning: Access to field 'nr_pmu_mappings' results in a dereference of a null pointer (loaded from variable 'env') [clang-analyzer-core.NullDereference] env->nr_pmu_mappings = pmu_num; ``` As functions are called potentially when !env was true. This condition could never be true as it would produce a segv, so remove the unnecessary NULL tests and silence clang-tidy. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: llvm@lists.linux.dev Cc: Ming Wang <wangming01@loongson.cn> Cc: Tom Rix <trix@redhat.com> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20231009183920.200859-8-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-12perf buildid-cache: Fix use of uninitialized valueIan Rogers
The buildid filename is first determined and then from this the buildid read. If getting the filename fails then the buildid will be used for a later memcmp uninitialized. Detected by clang-tidy. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: llvm@lists.linux.dev Cc: Ming Wang <wangming01@loongson.cn> Cc: Tom Rix <trix@redhat.com> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20231009183920.200859-7-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-12perf bench uprobe: Fix potential use of memory after freeIan Rogers
Found by clang-tidy: ``` bench/uprobe.c:98:3: warning: Use of memory after it is freed [clang-analyzer-unix.Malloc] bench_uprobe_bpf__destroy(skel); ``` Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Ravi Bangoria <ravi.bangoria@amd.com> Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Yang Jihong <yangjihong1@huawei.com> Cc: Huacai Chen <chenhuacai@kernel.org> Cc: Nathan Chancellor <nathan@kernel.org> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: llvm@lists.linux.dev Cc: Ming Wang <wangming01@loongson.cn> Cc: Tom Rix <trix@redhat.com> Cc: bpf@vger.kernel.org Link: https://lore.kernel.org/r/20231009183920.200859-6-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-12perf parse-events: Fix for term values that are raw eventsIan Rogers
Raw events can be strings like 'r0xead' but the 0x is optional so they can also be 'read'. On IcelakeX uncore_imc_free_running has an event called 'read' which may be programmed as: ``` $ perf stat -e 'uncore_imc_free_running/event=read/' -a sleep 1 ``` However, the PE_RAW type isn't allowed on the right of a term, even though in this case we just want to interpret it as a string. This leads to the following error on IcelakeX: ``` $ perf stat -e 'uncore_imc_free_running/event=read/' -a sleep 1 event syntax error: '..nning/event=read/' \___ parser error Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event> event selector. use 'perf list' to list available events ``` Fix this by allowing raw types on the right of terms and treat them as strings, just as is already done for PE_LEGACY_CACHE. Make this consistent by just entirely removing name_or_legacy and always using name_or_raw that covers all three cases. Fixes: 6fd1e5191591 ("perf parse-events: Support PMUs for legacy cache events") Signed-off-by: Ian Rogers <irogers@google.com> Cc: James Clark <james.clark@arm.com> Cc: Kan Liang <kan.liang@linux.intel.com> Link: https://lore.kernel.org/r/20230928004431.1926969-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-12perf build: Add missing comment about NO_LIBTRACEEVENT=1Arnaldo Carvalho de Melo
By default perf will fail the build if the development files for libtraceevent are not available. To build perf without libtraceevent support, disabling several features such as 'perf trace', one needs to add NO_LIBTRACEVENT=1 to the make command line. Add the missing comments about that to the tools/perf/Makefile.perf file, just like all the other such command line toggles. Fixes: 378ef0f5d9d7f465 ("perf build: Use libtraceevent from the system") Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Reviewed-by: Ian Rogers <irogers@google.com> Link: https://lore.kernel.org/r/ZR6+MhXtLnv6ow6E@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-12perf symbols: Add 'intel_idle_ibrs' to the list of idle symbolsArnaldo Carvalho de Melo
This is a longstanding to do list entry: we need a way to see that a sample took place while in idle state, as the current way to do it is to infer that by the name of the functions that in such state have more samples, IOW: a hack. Maybe we can do flip a bit in samples that take place inside the enter/exit idle section in do_idle()? But till then, add one more :-\ Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Frederic Weisbecker <frederic@kernel.org> Link: https://lore.kernel.org/r/ZR66Qgbcltt+zG7F@kernel.org Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-12perf parse-events: Avoid erange from hex numbersIan Rogers
We specify that a "num_hex" comprises 1 or more digits, however, that allows strtoull to fail with ERANGE. Limit the number of hex digits to being between 1 and 16. Before: ``` $ perf stat -e 'cpu/rE7574c47490475745/' true perf: util/parse-events.c:215: fix_raw: Assertion `errno == 0' failed. Aborted (core dumped) ``` After: ``` $ perf stat -e 'cpu/rE7574c47490475745/' true event syntax error: 'cpu/rE7574c47490475745/' \___ Bad event or PMU Unable to find PMU or event on a PMU of 'cpu' Initial error: event syntax error: 'cpu/rE7574c47490475745/' \___ unknown term 'rE7574c47490475745' for pmu 'cpu' valid terms: event,pc,edge,offcore_rsp,ldlat,inv,umask,frontend,cmask,config,config1,config2,config3,name,period,percore,metric-id Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event> event selector. use 'perf list' to list available events ``` Issue found through fuzz testing. Signed-off-by: Ian Rogers <irogers@google.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Link: https://lore.kernel.org/r/20230907210533.3712979-1-irogers@google.com Signed-off-by: Namhyung Kim <namhyung@kernel.org>
2023-10-10Merge tag 'perf-tools-fixes-for-v6.6-1-2023-09-25' into perf-tools-nextArnaldo Carvalho de Melo
To pick up the 'perf bench sched-seccomp-notify' changes to allow us to continue build testing perf-tools-next with the set of distro containers, where some older ones don't have a recent enough seccomp.h UAPI header that contains defines needed by this new 'perf bench' workload. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
generated by cgit (git 2.34.1) at 2025-04-18 03:21:20 +0000