summaryrefslogtreecommitdiff
path: root/tools/power
AgeCommit message (Collapse)Author
2020-10-23Merge tag 'pm-5.10-rc1-2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "First of all, the adaptive voltage scaling (AVS) drivers go to new platform-specific locations as planned (this part was reported to have merge conflicts against the new arm-soc updates in linux-next). In addition to that, there are some fixes (intel_idle, intel_pstate, RAPL, acpi_cpufreq), the addition of on/off notifiers and idle state accounting support to the generic power domains (genpd) code and some janitorial changes all over. Specifics: - Move the AVS drivers to new platform-specific locations and get rid of the drivers/power/avs directory (Ulf Hansson). - Add on/off notifiers and idle state accounting support to the generic power domains (genpd) framework (Ulf Hansson, Lina Iyer). - Ulf will maintain the PM domain part of cpuidle-psci (Ulf Hansson). - Make intel_idle disregard ACPI _CST if it cannot use the data returned by that method (Mel Gorman). - Modify intel_pstate to avoid leaving useless sysfs directory structure behind if it cannot be registered (Chen Yu). - Fix domain detection in the RAPL power capping driver and prevent it from failing to enumerate the Psys RAPL domain (Zhang Rui). - Allow acpi-cpufreq to use ACPI _PSD information with Family 19 and later AMD chips (Wei Huang). - Update the driver assumptions comment in intel_idle and fix a kerneldoc comment in the runtime PM framework (Alexander Monakov, Bean Huo). - Avoid unnecessary resets of the cached frequency in the schedutil cpufreq governor to reduce overhead (Wei Wang). - Clean up the cpufreq core a bit (Viresh Kumar). - Make assorted minor janitorial changes (Daniel Lezcano, Geert Uytterhoeven, Hubert Jasudowicz, Tom Rix). - Clean up and optimize the cpupower utility somewhat (Colin Ian King, Martin Kaistra)" * tag 'pm-5.10-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (23 commits) PM: sleep: remove unreachable break PM: AVS: Drop the avs directory and the corresponding Kconfig PM: AVS: qcom-cpr: Move the driver to the qcom specific drivers PM: runtime: Fix typo in pm_runtime_set_active() helper comment PM: domains: Fix build error for genpd notifiers powercap: Fix typo in Kconfig "Plance" -> "Plane" cpufreq: schedutil: restore cached freq when next_f is not changed acpi-cpufreq: Honor _PSD table setting on new AMD CPUs PM: AVS: smartreflex Move driver to soc specific drivers PM: AVS: rockchip-io: Move the driver to the rockchip specific drivers PM: domains: enable domain idle state accounting PM: domains: Add curly braces to delimit comment + statement block PM: domains: Add support for PM domain on/off notifiers for genpd powercap/intel_rapl: enumerate Psys RAPL domain together with package RAPL domain powercap/intel_rapl: Fix domain detection intel_idle: Ignore _CST if control cannot be taken from the platform cpuidle: Remove pointless stub intel_idle: mention assumption that WBINVD is not needed MAINTAINERS: Add section for cpuidle-psci PM domain cpufreq: intel_pstate: Delete intel_pstate sysfs if failed to register the driver ...
2020-10-23Merge branches 'pm-core', 'pm-sleep', 'pm-tools' and 'powercap'Rafael J. Wysocki
* pm-core: PM: runtime: Fix typo in pm_runtime_set_active() helper comment * pm-sleep: PM: sleep: remove unreachable break * pm-tools: cpupower: speed up generating git version string cpupowerutils: fix spelling mistake "dependant" -> "dependent" * powercap: powercap: Fix typo in Kconfig "Plance" -> "Plane" powercap/intel_rapl: enumerate Psys RAPL domain together with package RAPL domain powercap/intel_rapl: Fix domain detection
2020-10-16Merge tag 'linux-cpupower-5.10-rc1' of ↵Rafael J. Wysocki
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux Pull cpupower utility updates for 5.10-rc1 from Shuah Khan: "This update consists of minor fixes for spelling and speeding up generating git version string which will in turn speed up compiles." * tag 'linux-cpupower-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux: cpupower: speed up generating git version string cpupowerutils: fix spelling mistake "dependant" -> "dependent"
2020-10-14Merge tag 'linux-kselftest-fixes-5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest updates from Shuah Khan: - a selftests harness fix to flush stdout before forking to avoid parent and child printing duplicates messages. This is evident when test output is redirected to a file. - a tools/ wide change to avoid comma separated statements from Joe Perches. This fix spans tools/lib, tools/power/cpupower, and selftests. * tag 'linux-kselftest-fixes-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: tools: Avoid comma separated statements selftests/harness: Flush stdout before forking
2020-10-14Merge tag 'acpi-5.10-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These add support for generic initiator-only proximity domains to the ACPI NUMA code and the architectures using it, clean up some non-ACPICA code referring to debug facilities from ACPICA, reduce the overhead related to accessing GPE registers, add a new DPTF (Dynamic Power and Thermal Framework) participant driver, update the ACPICA code in the kernel to upstream revision 20200925, add a new ACPI backlight whitelist entry, fix a few assorted issues and clean up some code. Specifics: - Add support for generic initiator-only proximity domains to the ACPI NUMA code and the architectures using it (Jonathan Cameron) - Clean up some non-ACPICA code referring to debug facilities from ACPICA that are not actually used in there (Hanjun Guo) - Add new DPTF driver for the PCH FIVR participant (Srinivas Pandruvada) - Reduce overhead related to accessing GPE registers in ACPICA and the OS interface layer and make it possible to access GPE registers using logical addresses if they are memory-mapped (Rafael Wysocki) - Update the ACPICA code in the kernel to upstream revision 20200925 including changes as follows: + Add predefined names from the SMBus sepcification (Bob Moore) + Update acpi_help UUID list (Bob Moore) + Return exceptions for string-to-integer conversions in iASL (Bob Moore) + Add a new "ALL <NameSeg>" debugger command (Bob Moore) + Add support for 64 bit risc-v compilation (Colin Ian King) + Do assorted cleanups (Bob Moore, Colin Ian King, Randy Dunlap) - Add new ACPI backlight whitelist entry for HP 635 Notebook (Alex Hung) - Move TPS68470 OpRegion driver to drivers/acpi/pmic/ and split out Kconfig and Makefile specific for ACPI PMIC (Andy Shevchenko) - Clean up the ACPI SoC driver for AMD SoCs (Hanjun Guo) - Add missing config_item_put() to fix refcount leak (Hanjun Guo) - Drop lefrover field from struct acpi_memory_device (Hanjun Guo) - Make the ACPI extlog driver check for RDMSR failures (Ben Hutchings) - Fix handling of lid state changes in the ACPI button driver when input device is closed (Dmitry Torokhov) - Fix several assorted build issues (Barnabás Pőcze, John Garry, Nathan Chancellor, Tian Tao) - Drop unused inline functions and reduce code duplication by using kobj_to_dev() in the NFIT parsing code (YueHaibing, Wang Qing) - Serialize tools/power/acpi Makefile (Thomas Renninger)" * tag 'acpi-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits) ACPICA: Update version to 20200925 Version 20200925 ACPICA: Remove unnecessary semicolon ACPICA: Debugger: Add a new command: "ALL <NameSeg>" ACPICA: iASL: Return exceptions for string-to-integer conversions ACPICA: acpi_help: Update UUID list ACPICA: Add predefined names found in the SMBus sepcification ACPICA: Tree-wide: fix various typos and spelling mistakes ACPICA: Drop the repeated word "an" in a comment ACPICA: Add support for 64 bit risc-v compilation ACPI: button: fix handling lid state changes when input device closed tools/power/acpi: Serialize Makefile ACPI: scan: Replace ACPI_DEBUG_PRINT() with pr_debug() ACPI: memhotplug: Remove 'state' from struct acpi_memory_device ACPI / extlog: Check for RDMSR failure ACPI: Make acpi_evaluate_dsm() prototype consistent docs: mm: numaperf.rst Add brief description for access class 1. node: Add access1 class to represent CPU to memory characteristics ACPI: HMAT: Fix handling of changes from ACPI 6.2 to ACPI 6.3 ACPI: Let ACPI know we support Generic Initiator Affinity Structures x86: Support Generic Initiator only proximity domains ...
2020-10-14Merge tag 'platform-drivers-x86-v5.10-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86 Pull x86 platform driver updates from Hans de Goede: "Rather calm cycle for x86 platform drivers, all these have been in for-next for a couple of days with no bot complaints. Highlights: - PMC TigerLake fixes and new RocketLake support - various small fixes / updates in other drivers/tools" * tag 'platform-drivers-x86-v5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: MAINTAINERS: update X86 PLATFORM DRIVERS entry with new kernel.org git repo platform/x86: mlx-platform: Add capability field to platform FAN description platform_data/mlxreg: Extend core platform structure platform_data/mlxreg: Update module license platform/x86: mlx-platform: Remove PSU EEPROM configuration MAINTAINERS: Update maintainers for pmc_core driver platform/x86: intel_pmc_core: fix: Replace dev_dbg macro with dev_info() platform/x86: intel_pmc_core: Add Intel RocketLake (RKL) support platform/x86: intel_pmc_core: Clean up: Remove the duplicate comments and reorganize platform/x86: intel_pmc_core: Fix the slp_s0 counter displayed value platform/x86: intel_pmc_core: Fix TigerLake power gating status map platform/x86: pmc_core: Use descriptive names for LPM registers tools/power/x86/intel-speed-select: Update version for v5.10 tools/power/x86/intel-speed-select: Fix missing base-freq core IDs platform/x86: hp-wmi: add support for thermal policy
2020-10-13Merge branches 'acpi-extlog', 'acpi-memhotplug', 'acpi-button', 'acpi-tools' ↵Rafael J. Wysocki
and 'acpi-pci' * acpi-extlog: ACPI / extlog: Check for RDMSR failure * acpi-memhotplug: ACPI: memhotplug: Remove 'state' from struct acpi_memory_device * acpi-button: ACPI: button: fix handling lid state changes when input device closed * acpi-tools: tools/power/acpi: Serialize Makefile * acpi-pci: ACPI: PCI: update kernel-doc line comments
2020-10-08ACPICA: Tree-wide: fix various typos and spelling mistakesColin Ian King
ACPICA commit 6648a6ac8410813bcfedb5c8345259dd155ea851 Fix spelling issues found using the codespell checker Link: https://github.com/acpica/acpica/commit/6648a6ac Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-07tools/power/x86/intel-speed-select: Update version for v5.10Srinivas Pandruvada
Update version for changes released with v5.10 kernel release. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-10-07tools/power/x86/intel-speed-select: Fix missing base-freq core IDsJonathan Doman
The reported base-freq high-priority-cpu-list was potentially omitting some cpus, due to incorrectly using a logical core count to constrain the size of a physical punit core ID mask. We may need to read both high and low PBF CORE_MASK values regardless of the logical core count. Signed-off-by: Jonathan Doman <jonathan.doman@intel.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2020-10-02tools/power/acpi: Serialize MakefileThomas Renninger
Before this patch you get tools/power/acpi/Makefile.rules included in parallel trying to copy KERNEL_INCLUDE multiple times: make -j20 acpi DESCEND power/acpi DESCEND tools/acpidbg DESCEND tools/acpidump DESCEND tools/ec MKDIR include MKDIR include MKDIR include CP include CP include cp: cannot create directory '/home/abuild/rpmbuild/BUILD/linux-5.7.7+git20200917.10b82d517648/tools/power/acpi/include/acpi': File exists make[2]: *** [../../Makefile.rules:20: /home/abuild/rpmbuild/BUILD/linux-5.7.7+git20200917.10b82d517648/tools/power/acpi/include] Error 1 make[1]: *** [Makefile:16: acpidbg] Error 2 make[1]: *** Waiting for unfinished jobs.... with this patch each subdirectory will be processed serialized: DESCEND power/acpi DESCEND tools/acpidbg MKDIR include CP include CC tools/acpidbg/acpidbg.o LD acpidbg STRIP acpidbg DESCEND tools/acpidump CC tools/acpidump/apdump.o ... LD acpidump STRIP acpidump DESCEND tools/ec CC tools/ec/ec_access.o LD ec STRIP ec Signed-off-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-10-02tools: Avoid comma separated statementsJoe Perches
Use semicolons and braces. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-09-01notifier: Fix broken error handling patternPeter Zijlstra
The current notifiers have the following error handling pattern all over the place: int err, nr; err = __foo_notifier_call_chain(&chain, val_up, v, -1, &nr); if (err & NOTIFIER_STOP_MASK) __foo_notifier_call_chain(&chain, val_down, v, nr-1, NULL) And aside from the endless repetition thereof, it is broken. Consider blocking notifiers; both calls take and drop the rwsem, this means that the notifier list can change in between the two calls, making @nr meaningless. Fix this by replacing all the __foo_notifier_call_chain() functions with foo_notifier_call_chain_robust() that embeds the above pattern, but ensures it is inside a single lock region. Note: I switched atomic_notifier_call_chain_robust() to use the spinlock, since RCU cannot provide the guarantee required for the recovery. Note: software_resume() error handling was broken afaict. Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by: Ingo Molnar <mingo@kernel.org> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20200818135804.325626653@infradead.org
2020-08-20cpupower: speed up generating git version stringMartin Kaistra
The variable VERSION is expanded for every use of CFLAGS. This causes "git describe" to get called multiple times on the kernel tree, which can be quite slow. The git revision does not change during build, so we can use simple variable expansion to set VERSION. Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de> Acked-by: Thomas Renninger <trenn@suse.de> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-08-20cpupowerutils: fix spelling mistake "dependant" -> "dependent"Colin Ian King
There is a spelling mistake in a message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-08-03Merge tag 'acpi-5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These eliminate significant AML processing overhead related to using operation regions in system memory, update the ACPICA code in the kernel to upstream revision 20200717 (including a fix to prevent operation region reference counts from overflowing in some cases), remove the last bits of the (long deprecated) ACPI procfs interface and do some assorted cleanups. Specifics: - Eliminate significant AML processing overhead related to using operation regions in system memory by reworking the management of memory mappings in the ACPI code to defer unmap operations (to do them outside of the ACPICA locks, among other things) and making the memory operation reagion handler avoid releasing memory mappings created by it too early (Rafael Wysocki). - Update the ACPICA code in the kernel to upstream revision 20200717: * Prevent operation region reference counts from overflowing in some cases (Erik Kaneda). * Replace one-element array with flexible-array (Gustavo A. R. Silva). - Fix ACPI PCI hotplug reference counting (Rafael Wysocki). - Drop last bits of the ACPI procfs interface (Thomas Renninger). - Drop some redundant checks from the code parsing ACPI tables related to NUMA (Hanjun Guo). - Avoid redundant object evaluation in the ACPI device properties handling code (Heikki Krogerus). - Avoid unecessary memory overhead related to storing the signatures of the ACPI tables recognized by the kernel (Ard Biesheuvel). - Add missing newline characters when printing module parameter values in some places (Xiongfeng Wang). - Update the link to the ACPI specifications in some places (Tiezhu Yang). - Use the fallthrough pseudo-keyword in the ACPI code (Gustavo A. R. Silva). - Drop redundant variable initialization from the APEI code (Colin Ian King). - Drop uninitialized_var() from the ACPI PAD driver (Jason Yan). - Replace HTTP links with HTTPS ones in the ACPI code (Alexander A. Klimov)" * tag 'acpi-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (22 commits) ACPI: APEI: remove redundant assignment to variable rc ACPI: NUMA: Remove the useless 'node >= MAX_NUMNODES' check ACPI: NUMA: Remove the useless sub table pointer check ACPI: tables: Remove the duplicated checks for acpi_parse_entries_array() ACPICA: Update version to 20200717 ACPICA: Do not increment operation_region reference counts for field units ACPICA: Replace one-element array with flexible-array ACPI: Replace HTTP links with HTTPS ones ACPI: Use valid link to the ACPI specification ACPI: OSL: Clean up the removal of unused memory mappings ACPI: OSL: Use deferred unmapping in acpi_os_unmap_iomem() ACPI: OSL: Use deferred unmapping in acpi_os_unmap_generic_address() ACPICA: Preserve memory opregion mappings ACPI: OSL: Implement deferred unmapping of ACPI memory ACPI: Use fallthrough pseudo-keyword PCI: hotplug: ACPI: Fix context refcounting in acpiphp_grab_context() ACPI: tables: avoid relocations for table signature array ACPI: PAD: Eliminate usage of uninitialized_var() macro ACPI: sysfs: add newlines when printing module parameters ACPI: EC: add newline when printing 'ec_event_clearing' module parameter ...
2020-08-03Merge tag 'pm-5.9-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "The most significant change here is the extension of the Energy Model to cover non-CPU devices (as well as CPUs) from Lukasz Luba. There is also some new hardware support (Ice Lake server idle states table for intel_idle, Sapphire Rapids and Power Limit 4 support in the RAPL driver), some new functionality in the existing drivers (eg. a new switch to disable/enable CPU energy-efficiency optimizations in intel_pstate, delayed timers in devfreq), some assorted fixes (cpufreq core, intel_pstate, intel_idle) and cleanups (eg. cpuidle-psci, devfreq), including the elimination of W=1 build warnings from cpufreq done by Lee Jones. Specifics: - Make the Energy Model cover non-CPU devices (Lukasz Luba). - Add Ice Lake server idle states table to the intel_idle driver and eliminate a redundant static variable from it (Chen Yu, Rafael Wysocki). - Eliminate all W=1 build warnings from cpufreq (Lee Jones). - Add support for Sapphire Rapids and for Power Limit 4 to the Intel RAPL power capping driver (Sumeet Pawnikar, Zhang Rui). - Fix function name in kerneldoc comments in the idle_inject power capping driver (Yangtao Li). - Fix locking issues with cpufreq governors and drop a redundant "weak" function definition from cpufreq (Viresh Kumar). - Rearrange cpufreq to register non-modular governors at the core_initcall level and allow the default cpufreq governor to be specified in the kernel command line (Quentin Perret). - Extend, fix and clean up the intel_pstate driver (Srinivas Pandruvada, Rafael Wysocki): * Add a new sysfs attribute for disabling/enabling CPU energy-efficiency optimizations in the processor. * Make the driver avoid enabling HWP if EPP is not supported. * Allow the driver to handle numeric EPP values in the sysfs interface and fix the setting of EPP via sysfs in the active mode. * Eliminate a static checker warning and clean up a kerneldoc comment. - Clean up some variable declarations in the powernv cpufreq driver (Wei Yongjun). - Fix up the ->enter_s2idle callback definition to cover the case when it points to the same function as ->idle correctly (Neal Liu). - Rearrange and clean up the PSCI cpuidle driver (Ulf Hansson). - Make the PM core emit "changed" uevent when adding/removing the "wakeup" sysfs attribute of devices (Abhishek Pandit-Subedi). - Add a helper macro for declaring PM callbacks and use it in the MMC jz4740 driver (Paul Cercueil). - Fix white space in some places in the hibernate code and make the system-wide PM code use "const char *" where appropriate (Xiang Chen, Alexey Dobriyan). - Add one more "unsafe" helper macro to the freezer to cover the NFS use case (He Zhe). - Change the language in the generic PM domains framework to use parent/child terminology and clean up a typo and some comment fromatting in that code (Kees Cook, Geert Uytterhoeven). - Update the operating performance points OPP framework (Lukasz Luba, Andrew-sh.Cheng, Valdis Kletnieks): * Refactor dev_pm_opp_of_register_em() and update related drivers. * Add a missing function export. * Allow disabled OPPs in dev_pm_opp_get_freq(). - Update devfreq core and drivers (Chanwoo Choi, Lukasz Luba, Enric Balletbo i Serra, Dmitry Osipenko, Kieran Bingham, Marc Zyngier): * Add support for delayed timers to the devfreq core and make the Samsung exynos5422-dmc driver use it. * Unify sysfs interface to use "df-" as a prefix in instance names consistently. * Fix devfreq_summary debugfs node indentation. * Add the rockchip,pmu phandle to the rk3399_dmc driver DT bindings. * List Dmitry Osipenko as the Tegra devfreq driver maintainer. * Fix typos in the core devfreq code. - Update the pm-graph utility to version 5.7 including a number of fixes related to suspend-to-idle (Todd Brandt). - Fix coccicheck errors and warnings in the cpupower utility (Shuah Khan). - Replace HTTP links with HTTPs ones in multiple places (Alexander A. Klimov)" * tag 'pm-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (71 commits) cpuidle: ACPI: fix 'return' with no value build warning cpufreq: intel_pstate: Fix EPP setting via sysfs in active mode cpufreq: intel_pstate: Rearrange the storing of new EPP values intel_idle: Customize IceLake server support PM / devfreq: Fix the wrong end with semicolon PM / devfreq: Fix indentaion of devfreq_summary debugfs node PM / devfreq: Clean up the devfreq instance name in sysfs attr memory: samsung: exynos5422-dmc: Add module param to control IRQ mode memory: samsung: exynos5422-dmc: Adjust polling interval and uptreshold memory: samsung: exynos5422-dmc: Use delayed timer as default PM / devfreq: Add support delayed timer for polling mode dt-bindings: devfreq: rk3399_dmc: Add rockchip,pmu phandle PM / devfreq: tegra: Add Dmitry as a maintainer PM / devfreq: event: Fix trivial spelling PM / devfreq: rk3399_dmc: Fix kernel oops when rockchip,pmu is absent cpuidle: change enter_s2idle() prototype cpuidle: psci: Prevent domain idlestates until consumers are ready cpuidle: psci: Convert PM domain to platform driver cpuidle: psci: Fix error path via converting to a platform driver cpuidle: psci: Fail cpuidle registration if set OSI mode failed ...
2020-07-27ACPI: Use valid link to the ACPI specificationTiezhu Yang
Currently, acpi.info is an invalid link to access ACPI specification, the new valid link is https://uefi.org/specifications. Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-27pm-graph v5.7 - important s2idle fixesTodd Brandt
Important fixes: - in s2idle, use timekeeping_freeze trace mark instead of machine_suspend to denote entry into s2idle mode. - in s2idle, use machine_suspend trace mark to create a new virtual device called "s2idle_enter_<n>x". It denotes an s2idle_enter call loop of <n> iterations where s2idle was never actually achieved. It isn't counted as "freeze time" in the header. - in s2idle, only show multiple freeze times if s2idle went in and out of resume_noirq. Otherwise multiple freezes are shown with "waking" time subtracted (waking time is time spent outside s2idle dealing with wakeups). - in s2idle summaries, include "FREEZEWAKE" as an issue when at least 1ms is spent waking from s2idle. A clean run should only wake for the rtc timer. - add support for device callbacks with matching names in the same phase. In rare cases some devices register multiple callbacks from separate drivers using the same name. Without this fix only one is shown. - add kparamsfmt string back to fix bootgraph General updates: - when suspend_machine is missing, error says "failed in suspend_machine" - extract target count/time and add to summary title if -multi used - include any instances of "timeout" in dmesg as issues to be logged. - fix ftrace parse to handle any number of flags (instead of just 4). - remove sync/async_device string from device detail, remains in hover. - when using callgraph (-f) add driver name to callgraph titles. Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-07-17cpupower: Replace HTTP links with HTTPS onesAlexander A. Klimov
Rationale: Reduces attack surface on kernel devs opening the links for MITM as HTTPS traffic is much harder to manipulate. Deterministic algorithm: For each file: If not .svg: For each line: If doesn't contain `\bxmlns\b`: For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`: If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`: If both the HTTP and HTTPS versions return 200 OK and serve the same content: Replace HTTP with HTTPS. Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-07-16tools/power/x86/intel-speed-select: Update version for v5.9Srinivas Pandruvada
Update version for changes released with v5.9 kernel release. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2020-07-16tools/power/x86/intel-speed-select: Add retries for mail box commandsSrinivas Pandruvada
Retry mail box command on failure. The default retry count is 3. This can be changed by "-r|--retry" options. This helps during early bring up of platforms. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2020-07-16tools/power/x86/intel-speed-select: Add option to delay mbox commandsSrinivas Pandruvada
Add option "p|--pause" to introduce delay between two mail box commands for test purpose. This delay can be specified in milliseconds. By default there is no delay between two mailbox commands. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2020-07-16tools/power/x86/intel-speed-select: Ignore -o option processing on errorSrinivas Pandruvada
When for some reason, CONFIG_TDP_GET_CORE_MASK mailbox command fails, then don't continue online/offline operation for perf-profile set-config-level with "-o" option. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2020-07-16tools/power/x86/intel-speed-select: Change path for caching topology infoSrinivas Pandruvada
We want to cache the topology info to a file, which is not preserved across boot cycle. The current storage in /tmp is getting preserved. So change the path from /tmp/isst_cpu_topology.dat to /var/run/isst_cpu_topology.dat. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2020-07-06cpupower: Fix NULL but dereferenced coccicheck errorsShuah Khan
Fix NULL but dereferenced coccicheck errors found by: make coccicheck MODE=report M=tools/power/cpupower tools/power/cpupower/lib/cpufreq.c:384:19-23: ERROR: first is NULL but dereferenced. tools/power/cpupower/lib/cpufreq.c:440:19-23: ERROR: first is NULL but dereferenced. tools/power/cpupower/lib/cpufreq.c:308:19-23: ERROR: first is NULL but dereferenced. tools/power/cpupower/lib/cpufreq.c:753:19-23: ERROR: first is NULL but dereferenced. Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-07-06cpupower: Fix comparing pointer to 0 coccicheck warnsShuah Khan
Fix cocciccheck wanrns found by: make coccicheck MODE=report M=tools/power/cpupower/ tools/power/cpupower/utils/helpers/bitmask.c:29:12-13: WARNING comparing pointer to 0, suggest !E tools/power/cpupower/utils/helpers/bitmask.c:29:12-13: WARNING comparing pointer to 0 tools/power/cpupower/utils/helpers/bitmask.c:43:12-13: WARNING comparing pointer to 0 Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-06-10Merge branch 'acpica'Rafael J. Wysocki
* acpica: ACPICA: Update version to 20200528 ACPICA: iASL: add new OperationRegion subtype keyword PlatformRtMechanism ACPICA: acpidump: Removed dead code from oslinuxtbl.c
2020-06-05ACPICA: acpidump: Removed dead code from oslinuxtbl.cBob Moore
ACPICA commit 4d938d048790983b8b4252b0f4aeec59dabb476c ACPICA BZ 1119. Link: https://github.com/acpica/acpica/commit/4d938d04 Signed-off-by: Bob Moore <robert.moore@intel.com> Signed-off-by: Erik Kaneda <erik.kaneda@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-06-02Merge tag 'pm-5.8-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These rework the system-wide PM driver flags, make runtime switching of cpuidle governors easier, improve the user space hibernation interface code, add intel-speed-select interface documentation, add more debug messages to the ACPI code handling suspend to idle, update the cpufreq core and drivers, fix a minor issue in the cpuidle core and update two cpuidle drivers, improve the PM-runtime framework, update the Intel RAPL power capping driver, update devfreq core and drivers, and clean up the cpupower utility. Specifics: - Rework the system-wide PM driver flags to make them easier to understand and use and update their documentation (Rafael Wysocki, Alan Stern). - Allow cpuidle governors to be switched at run time regardless of the kernel configuration and update the related documentation accordingly (Hanjun Guo). - Improve the resume device handling in the user space hibernarion interface code (Domenico Andreoli). - Document the intel-speed-select sysfs interface (Srinivas Pandruvada). - Make the ACPI code handing suspend to idle print more debug messages to help diagnose issues with it (Rafael Wysocki). - Fix a helper routine in the cpufreq core and correct a typo in the struct cpufreq_driver kerneldoc comment (Rafael Wysocki, Wang Wenhu). - Update cpufreq drivers: - Make the intel_pstate driver start in the passive mode by default on systems without HWP (Rafael Wysocki). - Add i.MX7ULP support to the imx-cpufreq-dt driver and add i.MX7ULP to the cpufreq-dt-platdev blacklist (Peng Fan). - Convert the qoriq cpufreq driver to a platform one, make the platform code create a suitable device object for it and add platform dependencies to it (Mian Yousaf Kaukab, Geert Uytterhoeven). - Fix wrong compatible binding in the qcom driver (Ansuel Smith). - Build the omap driver by default for ARCH_OMAP2PLUS (Anders Roxell). - Add r8a7742 SoC support to the dt cpufreq driver (Lad Prabhakar). - Update cpuidle core and drivers: - Fix three reference count leaks in error code paths in the cpuidle core (Qiushi Wu). - Convert Qualcomm SPM to a generic cpuidle driver (Stephan Gerhold). - Fix up the execution order when entering a domain idle state in the PSCI driver (Ulf Hansson). - Fix a reference counting issue related to clock management and clean up two oddities in the PM-runtime framework (Rafael Wysocki, Andy Shevchenko). - Add ElkhartLake support to the Intel RAPL power capping driver and remove an unused local MSR definition from it (Jacob Pan, Sumeet Pawnikar). - Update devfreq core and drivers: - Replace strncpy() with strscpy() in the devfreq core and use lockdep asserts instead of manual checks for a locked mutex in it (Dmitry Osipenko, Krzysztof Kozlowski). - Add a generic imx bus scaling driver and make it register an interconnect device (Leonard Crestez, Gustavo A. R. Silva). - Make the cpufreq notifier in the tegra30 driver take boosting into account and delete an unuseful error message from that driver (Dmitry Osipenko, Markus Elfring). - Remove unneeded semicolon from the cpupower code (Zou Wei)" * tag 'pm-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (51 commits) cpuidle: Fix three reference count leaks PM: runtime: Replace pm_runtime_callbacks_present() PM / devfreq: Use lockdep asserts instead of manual checks for locked mutex PM / devfreq: imx-bus: Fix inconsistent IS_ERR and PTR_ERR PM / devfreq: Replace strncpy with strscpy PM / devfreq: imx: Register interconnect device PM / devfreq: Add generic imx bus scaling driver PM / devfreq: tegra30: Delete an error message in tegra_devfreq_probe() PM / devfreq: tegra30: Make CPUFreq notifier to take into account boosting PM: hibernate: Restrict writes to the resume device PM: runtime: clk: Fix clk_pm_runtime_get() error path cpuidle: Convert Qualcomm SPM driver to a generic CPUidle driver ACPI: EC: PM: s2idle: Extend GPE dispatching debug message ACPI: PM: s2idle: Print type of wakeup debug messages powercap: RAPL: remove unused local MSR define PM: runtime: Make clear what we do when conditions are wrong in rpm_suspend() Documentation: admin-guide: pm: Document intel-speed-select PM: hibernate: Split off snapshot dev option PM: hibernate: Incorporate concurrency handling Documentation: ABI: make current_governer_ro as a candidate for removal ...
2020-06-02Merge tag 'platform-drivers-x86-v5.8-1' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Andy Shevchenko: - Add a support of the media keys on the ASUS laptop UX325JA/UX425JA - ASUS WMI driver can now handle 2-in-1 models T100TA, T100CHI, T100HA, T200TA - Big refactoring of Intel SCU driver with Elkhart Lake support has been added - Slim Bootloarder firmware update signaling WMI driver has been added - Thinkpad ACPI driver can handle dual fan configuration on new P and X models - Touchscreen DMI driver has been extended to support - MP-man MPWIN895CL tablet - ONDA V891 v5 tablet - techBite Arc 11.6 - Trekstor Twin 10.1 - Trekstor Yourbook C11B - Vinga J116 - Virtual Button driver got a few fixes to detect mode of 2-in-1 tablet models - Intel Speed Select tools update - Plenty of small cleanups here and there * tag 'platform-drivers-x86-v5.8-1' of git://git.infradead.org/linux-platform-drivers-x86: (89 commits) platform/x86: dcdbas: Check SMBIOS for protected buffer address platform/x86: asus_wmi: Reserve more space for struct bias_args platform/x86: intel-vbtn: Only blacklist SW_TABLET_MODE on the 9 / "Laptop" chasis-type platform/x86: intel-hid: Add a quirk to support HP Spectre X2 (2015) platform/x86: touchscreen_dmi: Update Trekstor Twin 10.1 entry platform/x86: touchscreen_dmi: Add info for the Trekstor Yourbook C11B platform/x86: hp-wmi: Introduce HPWMI_POWER_FW_OR_HW as convenient shortcut platform/x86: hp-wmi: Convert simple_strtoul() to kstrtou32() platform/x86: hp-wmi: Refactor postcode_store() to follow standard patterns platform/x86: acerhdf: replace space by * in modalias platform/x86: ISST: Increase timeout tools/power/x86/intel-speed-select: Fix invalid core mask tools/power/x86/intel-speed-select: Increase CPU count tools/power/x86/intel-speed-select: Fix json perf-profile output output platform/x86: dell-wmi: Ignore keyboard attached / detached events platform/x86: dell-laptop: don't register micmute LED if there is no token platform/x86: thinkpad_acpi: Replace custom approach by kstrtoint() platform/x86: thinkpad_acpi: Use strndup_user() in dispatch_proc_write() platform/x86: thinkpad_acpi: Replace next_cmd(&buf) with strsep(&buf, ",") platform/x86: intel-vbtn: Detect switch position before registering the input-device ...
2020-06-01Merge tag 'smp-core-2020-06-01' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP updates from Ingo Molnar: "Misc cleanups in the SMP hotplug and cross-call code" * tag 'smp-core-2020-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: cpu/hotplug: Remove __freeze_secondary_cpus() cpu/hotplug: Remove disable_nonboot_cpus() cpu/hotplug: Fix a typo in comment "broadacasted"->"broadcasted" smp: Use smp_call_func_t in on_each_cpu()
2020-05-22tools/power/x86/intel-speed-select: Fix invalid core maskSrinivas Pandruvada
The core mask display is wrong in some cases. This is showing more cpus than the mask has. This is because mask is 64 bit but it used with BIT() macro to get the presence of CPU which doesn't support unsigned long long. Added a new macro for BIT_ULL and use that to get the presence of a CPU. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2020-05-22tools/power/x86/intel-speed-select: Increase CPU countSrinivas Pandruvada
Increase CPU count so that more than 64 is supported in one request. For example: sudo ./intel-speed-select -d --cpu 0-66 core-power assoc -clos 0 The above command stops at 63. With this change, it can support more CPU numbers from 0-255. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2020-05-22tools/power/x86/intel-speed-select: Fix json perf-profile output outputPrarit Bhargava
The 'intel-speed-select -f json perf-profile get-lock-status' command outputs the package, die, and cpu data as separate fields. ex) "package-0": { "die-0": { "cpu-0": { Commit 74062363f855 ("tools/power/x86/intel-speed-select: Avoid duplicate Package strings for json") prettied this output so that it is a single line for some json output commands and the same should be done for other commands. Output package, die, and cpu info in a single line when using json output. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: platform-driver-x86@vger.kernel.org Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2020-05-11tools/power/x86/intel-speed-select: Update versionSrinivas Pandruvada
Update version to include 5.8 series enhancements. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2020-05-11tools/power/x86/intel-speed-select: Enable clos for turbo-freq enableSrinivas Pandruvada
turbo-freq enable, requires clos enable. So this is a two step process, when "-a" option is used. This is causing confusion to users. So enable clos by default for turbo-freq enable. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2020-05-11intel-speed-select: Fix speed-select-base-freq-properties output on CLX-NPrarit Bhargava
On CLX-N, the perf-profile-level's output is terminated before the speed-select-base-freq-properties are output which results in a corrupt json file. Adjust the output of speed-select-base-freq-properties by one on CLX-N. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: platform-driver-x86@vger.kernel.org Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2020-05-11tools/power/x86/intel-speed-select: Fix CLX-N package information outputPrarit Bhargava
On CLX-N the perf-profile output is missing the package, die, and cpu output. On CLX-N the pkg_dev struct will never be evaluated by the core code so pkg_dev.processed is always 0 and the package, die, and cpu information is never output. Set the pkg_dev.processed flag to 1 for CLX-N processors. Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: andriy.shevchenko@linux.intel.com Cc: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: platform-driver-x86@vger.kernel.org
2020-05-11tools/power/x86/intel-speed-select: Check support status before enableSrinivas Pandruvada
When turbo-freq or base-freq feature is not supported, the enable will fail. So first check support status and print error. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2020-05-11tools/power/x86/intel-speed-select: Change debug to errorSrinivas Pandruvada
When turbo-freq is enabled, we can't disable core-power. Currently it prints debug message to warn. Change this to error message. While here remove "\n" from calls to isst_display_error_info_message(), as it will be added again during actual print. Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
2020-05-08cpupower: Remove unneeded semicolonZou Wei
Fixes coccicheck warnings: tools/power/cpupower/utils/cpupower-info.c:65:2-3: Unneeded semicolon tools/power/cpupower/utils/cpupower-set.c:75:2-3: Unneeded semicolon tools/power/cpupower/utils/idle_monitor/amd_fam14h_idle.c:120:2-3: Unneeded semicolon tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c:175:2-3: Unneeded semicolon tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c:56:2-3: Unneeded semicolon tools/power/cpupower/utils/idle_monitor/cpuidle_sysfs.c:75:2-3: Unneeded semicolon tools/power/cpupower/utils/idle_monitor/hsw_ext_idle.c:82:2-3: Unneeded semicolon tools/power/cpupower/utils/idle_monitor/nhm_idle.c:94:2-3: Unneeded semicolon tools/power/cpupower/utils/idle_monitor/snb_idle.c:80:2-3: Unneeded semicolon Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zou Wei <zou_wei@huawei.com> Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
2020-05-07cpu/hotplug: Remove disable_nonboot_cpus()Qais Yousef
The single user could have called freeze_secondary_cpus() directly. Since this function was a source of confusion, remove it as it's just a pointless wrapper. While at it, rename enable_nonboot_cpus() to thaw_secondary_cpus() to preserve the naming symmetry. Done automatically via: git grep -l enable_nonboot_cpus | xargs sed -i 's/enable_nonboot_cpus/thaw_secondary_cpus/g' Signed-off-by: Qais Yousef <qais.yousef@arm.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Link: https://lkml.kernel.org/r/20200430114004.17477-1-qais.yousef@arm.com
2020-04-20pm-graph v5.6Todd Brandt
sleepgraph: - force usage of python3 instead of using system default - fix bugzilla 204773 (https://bugzilla.kernel.org/show_bug.cgi?id=204773) - fix issue of platform info not being reset in -multi (logs fill up) - change -ftop call to "pm_suspend", this is one level below state_store - add -wificheck command to read out the current wifi device details - change -wifi behavior to poll /proc/net/wireless for wifi connect - add wifi reconnect time to timeline, include time in summary column - add "fail on wifi_resume" to timeline and summary when wifi fails - add a set of commands to collect data before/after suspend in the log - add "-cmdinfo" command which prints out all the data collected - check for cmd info tools at start, print found/missing in green/red - fix kernel suspend time calculation: tool used to look for start of pm_suspend_console, but the order has changed. latest kernel starts with ksys_sync, use this instead - include time spent in mem/disk in the header (same as freeze/standby) - ignore turbostat 32-bit capability warnings - print to result.txt when -skiphtml is used, just say result: pass - don't exit on SIGTSTP, it's a ctrl-Z and the tool may come back - -multi argument supports duration as well as count: hours, minutes, seconds - update the -multi status output to be more informative - -maxfail sets maximum consecutive fails before a -multi run is aborted - in -summary, ignore dmesg/ftrace/html files that are 0 size bootgraph: - force usage of python3 instead of using system default README: - add endurance testing instructions Makefile: - remove pycache on uninstall Signed-off-by: Todd Brandt <todd.e.brandt@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-04-03Merge tag 'spdx-5.7-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx Pull SPDX updates from Greg KH: "Here are three SPDX patches for 5.7-rc1. One fixes up the SPDX tag for a single driver, while the other two go through the tree and add SPDX tags for all of the .gitignore files as needed. Nothing too complex, but you will get a merge conflict with your current tree, that should be trivial to handle (one file modified by two things, one file deleted.) All three of these have been in linux-next for a while, with no reported issues other than the merge conflict" * tag 'spdx-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/spdx: ASoC: MT6660: make spdxcheck.py happy .gitignore: add SPDX License Identifier .gitignore: remove too obvious comments
2020-03-31Merge tag 'platform-drivers-x86-v5.7-1' of ↵Linus Torvalds
git://git.infradead.org/linux-platform-drivers-x86 Pull x86 platform driver updates from Andy Shevchenko: - Fix for improper handling of fan_boost_mode in sysfs for ASUS laptops. - On newer ASUS laptops the 1st battery is named differently, here is a fix. - Fix Lex 2I385SW to allow both network cards to be used. - The power integrated circuit driver for Surface 3 has been added. - Refactor and clean up of Intel PMC driver and enable it on Intel Jasper Lake. - Clean up of Dell RBU driver. - Big update for Intel Speed Select technology support tool and driver. * tag 'platform-drivers-x86-v5.7-1' of git://git.infradead.org/linux-platform-drivers-x86: (75 commits) platform/x86: surface3_power: Fix always true condition in mshw0011_space_handler() platform/x86: surface3_power: Fix Kconfig section ordering platform/x86: surface3_power: Add missed headers platform/x86: surface3_power: Reformat GUID assignment platform/x86: surface3_power: Drop useless macro ACPI_PTR() platform/x86: surface3_power: Prefix POLL_INTERVAL with SURFACE_3 platform/x86: surface3_power: Simplify mshw0011_adp_psr() to one liner platform/x86: surface3_power: Use dev_err() instead of pr_err() platform/x86: surface3_power: Drop unused structure definition platform/x86: surface3_power: MSHW0011 rev-eng implementation platform/x86: intel_pmc_core: Make pmc_core_substate_res_show() generic platform/x86: intel_pmc_core: Make pmc_core_lpm_display() generic for platforms that support sub-states tools/power/x86/intel-speed-select: Fix a typo in error message tools/power/x86/intel-speed-select: Update version tools/power/x86/intel-speed-select: Avoid duplicate Package strings for json tools/power/x86/intel-speed-select: Add display for enabled cpus count tools/power/x86/intel-speed-select: Print friendly warning for bad command line tools/power/x86/intel-speed-select: Fix avx options for turbo-freq feature tools/power/x86/intel-speed-select: Improve CLX commands tools/power/x86/intel-speed-select: Show error for invalid CPUs in the options ...
2020-03-26tools/power/x86/intel_pstate_tracer: fix a broken y-axis scaleDoug Smythies
A fixed y-axis scale was missed during a change to autoscale. Correct it. Fixes: 709bd70d070ee ("tools/power/x86/intel_pstate_tracer: change several graphs to autoscale y-axis") Signed-off-by: Doug Smythies <dsmythies@telus.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2020-03-25.gitignore: add SPDX License IdentifierMasahiro Yamada
Add SPDX License Identifier to all .gitignore files. Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-21tools/power turbostat: update versionLen Brown
A stitch in time saves nine. Signed-off-by: Len Brown <len.brown@intel.com>
2020-03-21tools/power turbostat: Print cpuidle informationLen Brown
Print cpuidle driver and governor. Originally-by: Antti Laakso <antti.laakso@linux.intel.com> Signed-off-by: Len Brown <len.brown@intel.com>