| Age | Commit message (Collapse) | Author |
|---|
|
Recently, xsk part of libbpf was moved to selftests/bpf directory and
lives on its own because there is an AF_XDP testing application that
needs it called xdpxceiver. That name makes it a bit hard to indicate
who maintains it as there are other XDP samples in there, whereas this
one is strictly about AF_XDP.
Do s/xdpxceiver/xskxceiver so that it will be easier to figure out who
maintains it. A follow-up patch will correct MAINTAINERS file.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220707111613.49031-2-maciej.fijalkowski@intel.com
|
|
Convert the stats tests from spinning on the getsockopt to just check
getsockopt once when the Rx thread has received all the packets. The
actual completion of receiving the last packet forms a natural point
in time when the receiver is ready to call the getsockopt to check the
stats. In the previous version , we just span on the getsockopt until
we received the right answer. This could be forever or just getting
the "correct" answer by shear luck.
The pacing_on variable can now be dropped since all test can now
handle pacing properly.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-10-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Make the stats tests look and feel just like normal tests instead of
bunched under the umbrella of TEST_STATS. This means we will always
run each of them even if one fails. Also gets rid of some special case
code.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-9-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce validation functions that can be optionally called by the Rx
and Tx threads. These are then used to replace the Rx and Tx stats
dispatchers. This so that we in the next commit can make the stats
tests proper normal tests and not be some special case, as today.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-8-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a timeout to the tests so that if all packets have not been
received within 3 seconds, fail the ongoing test. Hinders a test from
dead-locking if there is something wrong.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-6-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Fix the reporting of failed tests as it was broken in several
ways. First, a failed test was reported as both failed and passed
messing up the count. Second, tests were not aborted after a failure
and could generate more "failures" messing up the count even
more. Third, the failure reporting from the application to the shell
script was wrong. It always reported pass. And finally, the handling
of the failures in the launch script was not correct.
Correct all this by propagating the failure up through the function
calls to a calling function that can abort the test. A receiver or
sender thread will mark the new variable in the test spec called fail,
if a test has failed. This is then picked up by the main thread when
everyone else has exited and this is then marked and propagated up to
the calling script.
Also add a summary function in the calling script so that a user
does not have to go through the sub tests to see if something has
failed.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-5-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Execute all xsk selftests for busy-poll mode too. Currently they were
only run for the standard interrupt driven softirq mode. Replace the
unused option queue-id with the new option busy-poll.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-4-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Do not try to send packets of zero length since they are dropped by
veth after commit 726e2c5929de84 ("veth: Ensure eth header is in skb's
linear part"). Replace these two packets with packets of length 60 so
that they are not dropped.
Also clean up the confusing naming. MIN_PKT_SIZE was really
MIN_ETH_PKT_SIZE and PKT_SIZE was both MIN_ETH_SIZE and the default
packet size called just PKT_SIZE. Make it consistent by using the
right define in the right place.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20220510115604.8717-3-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
After commit 710ad98c363a ("veth: Do not record rx queue hint in veth_xmit"),
veth no longer receives traffic on the same queue as it was sent on. This
breaks the bpf_res test for the AF_XDP selftests as the socket tied to
queue 1 will not receive traffic anymore.
Modify the test so that two sockets are tied to queue id 0 using a shared
umem instead. When killing the first socket enter the second socket into
the xskmap so that traffic will flow to it. This will still test that the
resources are not cleaned up until after the second socket dies, without
having to rely on veth supporting rx_queue hints.
Reported-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220125082945.26179-1-magnus.karlsson@gmail.com
|
|
Add a test for the frame_headroom feature that can be set on the
umem. The logic added validates that all offsets in all tests and
packets are valid, not just the ones that have a specifically
configured frame_headroom.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-14-magnus.karlsson@gmail.com
|
|
Add a test where a single packet is sent and received. This might
sound like a silly test, but since many of the interfaces in xsk are
batched, it is important to be able to validate that we did not break
something as fundamental as just receiving single packets, instead of
batches of packets at high speed.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-12-magnus.karlsson@gmail.com
|
|
Introduce pacing of traffic so that the Tx thread can never send more
packets than the receiver has processed plus the number of packets it
can have in its umem. So at any point in time, the number of in flight
packets (not processed by the Rx thread) are less than or equal to the
number of packets that can be held in the Rx thread's umem.
The batch size is also increased to improve running time.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210922075613.12186-11-magnus.karlsson@gmail.com
|
|
Add tests for 2K frame size. Both a standard send and receive test and
one testing for invalid descriptors when the frame size is 2K.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-21-magnus.karlsson@gmail.com
|
|
Add tests for invalid xsk descriptors in the Tx ring. A number of
handcrafted nasty invalid descriptors are created and submitted to the
tx ring to check that they are validated correctly. Corner case valid
ones are also sent. The tests are run for both aligned and unaligned
mode.
pkt_stream_set() is introduced to be able to create a hand-crafted
packet stream where every single packet is specified in detail.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-20-magnus.karlsson@gmail.com
|
|
Add a test for unaligned mode in which packet buffers can be placed
anywhere within the umem. Some packets are made to straddle page
boundaries in order to check for correctness. On the Tx side, buffers
are now allocated according to the addresses found in the packet
stream. Thus, the placement of buffers can be controlled with the
boolean use_addr_for_fill in the packet stream.
One new pkt_stream interface is introduced: pkt_stream_replace_half()
that replaces every other packet in the default packet stream with the
specified new packet. The constant DEFAULT_OFFSET is also
introduced. It specifies at what offset from the start of a chunk a Tx
packet is placed by the sending thread. This is just to be able to
test that it is possible to send packets at an offset not equal to
zero.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-18-magnus.karlsson@gmail.com
|
|
Introduce the concept of a default packet stream that is the set of
packets sent by most tests. Then add the ability to replace it for a
test that would like to send or receive something else through the use
of the function pkt_stream_replace() and then restored with
pkt_stream_restore_default(). These are then used to convert the
STAT_TEST_TX_INVALID to use these new APIs.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-17-magnus.karlsson@gmail.com
|
|
Allow for invalid packets to be sent. These are verified by the Rx
thread not to be received. Or put in another way, if they are
received, the test will fail. This feature will be used to eliminate
an if statement for a stats test and will also be used by other tests
in later patches. The previous code could only deal with valid
packets.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-16-magnus.karlsson@gmail.com
|
|
Remove the MAX_SOCKS define as it always will be one for the forseable
future and the code does not work for any other case anyway.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-15-magnus.karlsson@gmail.com
|
|
Make the pthread_t variables local scope instead of global. No reason
for them to be global.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-14-magnus.karlsson@gmail.com
|
|
Make xdp_flags and bind_flags local instead of global by moving them
into the interface object. These flags decide if the socket should be
created in SKB mode or in DRV mode and therefore they are sticky and
will survive a test_spec_reset. Since every test is first run in SKB
mode then in DRV mode, this change only happens once. With this
change, the configured_mode global variable can also be
erradicated. The first test_spec_init() also becomes superfluous and
can be eliminated.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-13-magnus.karlsson@gmail.com
|
|
Add the ability in the test specification to specify numbers of
sockets to create. The default is one socket. This is then used to
remove test specific if-statements around the bpf_res tests.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-12-magnus.karlsson@gmail.com
|
|
Replace the second_step global variable with a test specification
variable called total_steps that a test can be set to indicate how
many times the packet stream should be sent without reinitializing any
sockets. This eliminates test specific code in the test runner around
the bidirectional test.
The total_steps variable is 1 by default as most tests only need a
single round of packets.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-11-magnus.karlsson@gmail.com
|
|
Introduce rx_on and tx_on in the ifobject so that we can describe if
the thread should create a socket with only tx, rx, or both. This
eliminates some test specific if statements from the code. We can also
eliminate the flow vector structure now as this is fully specified
by the tx_on and rx_on variables.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-10-magnus.karlsson@gmail.com
|
|
Add a use_poll option to the ifobject so that we do not need to use a
test specific if-statement in the test runner.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-9-magnus.karlsson@gmail.com
|
|
Introduce the test name in the test specification. This so we can set
the name locally in the test function and simplify the logic for
printing out test results.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-8-magnus.karlsson@gmail.com
|
|
Make the frame size configurable instead of it being hard coded to a
default. This is a property of the umem and will make it possible to
implement tests for different umem frame sizes in a later patch.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-7-magnus.karlsson@gmail.com
|
|
Move the global variable rxqsize to struct xsk_socket_info as it
describes the size of a ring in that struct. By default, it is set to
the size dictated by libbpf.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-6-magnus.karlsson@gmail.com
|
|
Move the global variables num_frames and frame_headroom to struct
xsk_umem_info. They describe properties of the umem so no reason for
them to be global.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-5-magnus.karlsson@gmail.com
|
|
Introduce a test specification to be able to concisely describe a
test. Currently, a test is implemented by sprinkling test specific if
statements here and there, which is not scalable or easy to
understand. The end goal with this patch set is to come to the point
in which a test is completely specified by a test specification that
can easily be constructed in a single function so that new tests can
be added without too much trouble. This test specification will be run
by a test runner that has no idea about tests. It just executes the
what test specification states.
This patch introduces the test specification and, as a start, puts the
two interface objects in there, one containing the packet stream to be
sent and the other one the packet stream that is supposed to be
received for a test to pass. The global variables containing these can
then be eliminated. The following patches will convert each existing
test into a test specification and add the needed fields into it and
the functionality in the test runner that act on the test
specification. At the end, the test runner should contain no test
specific code and each test should be described in a single simple
function.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-4-magnus.karlsson@gmail.com
|
|
Introduce a typedef of the thread function so this can be passed to
init_iface() in order to simplify that function.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-3-magnus.karlsson@gmail.com
|
|
Simplify the xsk_info and umem_info allocation by allocating them
upfront in an array, instead of allocating an array of pointers to
future creations of these. Allocating them upfront also has the
advantage that configuration information can be stored in these
structures instead of relying on global variables. With the previous
structure, xsk_info and umem_info were created too late to be able to
store most configuration information. This will be used to eliminate
most global variables in later patches in this series.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20210907071928.9750-2-magnus.karlsson@gmail.com
|
|
Preface all options with opt_ and make them booleans.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-17-magnus.karlsson@gmail.com
|
|
Make enums lower case as that is the standard. Also drop the
unnecessary TEST_MODE_UNCONFIGURED mode.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-16-magnus.karlsson@gmail.com
|
|
Generate packets from a specification instead of something hard
coded. The idea is that a test generates one or more packet
specifications and provides it/them to both Tx and Rx. The Tx thread
will generate from this specification and Rx will validate that it
receives what is in the specification. The specification can be the
same on both ends, meaning that everything that was sent should be
received, or different which means that Rx will only receive part of
the sent packets.
Currently, the packet specification is the same for both Rx and Tx and
the same for each test. This will change in later work as features
and tests are added.
The data path functions are also renamed to better reflect what
actions they are performing after introducing this feature.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-15-magnus.karlsson@gmail.com
|
|
Generate the packet directly in the umem instead of in a temporary
buffer that is copied out. Simplifies the code and improves
performance.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-14-magnus.karlsson@gmail.com
|
|
Simpify the cleanup of ifobjects right before the program exits by
introducing functions for creating and destroying these objects.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-13-magnus.karlsson@gmail.com
|
|
Decrease sending speed to avoid potentially overflowing some buffers
in the skb case that leads to dropped packets we cannot control (and
thus the tests may generate false negatives). Decrease batch size and
introduce a usleep in the transmit thread to not overflow the
receiver.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-12-magnus.karlsson@gmail.com
|
|
Simplify packet validation in the xsk selftests by performing it at
once for every packet. The current code performed this per batch and
did this on copied packet data. Make it simpler and faster by
validating it at once and on the umem packet data thus skipping the
copy and the memory allocation for the temprary buffer.
The optional packet dump feature is also simplified in the same
manner. Memory allocation and copying is removed and the dump is
performed directly on the umem data.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-10-magnus.karlsson@gmail.com
|
|
Disassociate the number of packets sent with the number of buffers in
the umem. This so we can loop over the umem to test more things. Set
the size of the umem to be a multiple of 2M. A requirement for huge
pages that are needed in unaligned mode.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-8-magnus.karlsson@gmail.com
|
|
Get rid of the end-of-test packet and just count the number of packets
received and quit when the expected number as been
received. Simplifies the code.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-7-magnus.karlsson@gmail.com
|
|
Simplify the retry code and make it more efficient by waiting first,
instead of trying immediately which always fails due to the
asynchronous nature of xsk socket close. Also decrease the wait time
to significantly lower the run-time of the test suite.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-6-magnus.karlsson@gmail.com
|
|
Remove unused variables and typedefs. The *_npkts variables are
incremented but never used.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-4-magnus.karlsson@gmail.com
|
|
Remove the number of tx packet option as this should be decided by the
test itself. Also change the number of packets to be sent to 4096
speeding up the execution.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210825093722.10219-3-magnus.karlsson@gmail.com
|
|
Remove two unused defines.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-18-maciej.fijalkowski@intel.com
|
|
The usage of the condition variable is broken, and overkill. Replace it
with a pthread barrier.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-17-maciej.fijalkowski@intel.com
|
|
There is really no reason to have a non-default thread stack
size. Remove that.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-16-maciej.fijalkowski@intel.com
|
|
Introduce a test that is supposed to verify the persistence of BPF
resources based on underlying bpf_link usage.
Test will:
1) create and bind two sockets on queue ids 0 and 1
2) run a traffic on queue ids 0
3) remove xsk sockets from queue 0 on both veth interfaces
4) run a traffic on queues ids 1
Running traffic successfully on qids 1 means that BPF resources were
not removed on step 3).
In order to make it work, change the command that creates veth pair to
have the 4 queue pairs by default.
Introduce the arrays of xsks and umems to ifobject struct but keep a
pointers to single entities, so rest of the logic around Rx/Tx can be
kept as-is.
For umem handling, double the size of mmapped space and split that
between the two sockets.
Rename also bidi_pass to a variable 'second_step' of a boolean type as
it's now used also for the test that is introduced here and it doesn't
have anything in common with bi-directional testing.
Drop opt_queue command line argument as it wasn't working before anyway.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-15-maciej.fijalkowski@intel.com
|
|
Although thread_common_ops() are called in both Tx and Rx threads,
testapp_validate() will not spawn Tx thread until Rx thread signals that
it has finished its initialization via condition variable.
Therefore, locking in thread_common_ops is not needed and furthermore Tx
thread does not have to spin on atomic variable.
Note that this simplification wouldn't be possible if there would still
be a common worker thread.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-13-maciej.fijalkowski@intel.com
|
|
Currently, there is a testapp_sockets() that acts like a wrapper around
testapp_validate() and it is called for bidi and teardown test types.
Other test types call testapp_validate() directly.
Split testapp_sockets() onto two separate functions so a bunch of bidi
specific logic can be moved there and out of testapp_validate() itself.
Introduce function pointer to ifobject struct which will be used for
assigning the Rx/Tx function that is assigned to worker thread. Let's
also have a global ifobject Rx/Tx pointers so it's easier to swap the
vectors on a second run of a bi-directional test. Thread creation now is
easey to follow.
switching_notify variable is useless, info about vector switch can be
printed based on bidi_pass state.
Last but not least, init/destroy synchronization variables only once,
not per each test.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-12-maciej.fijalkowski@intel.com
|
|
Tx thread needs to be started after the Rx side is fully initialized so
that packets are not xmitted until xsk Rx socket is ready to be used.
It can be observed that atomic variable spinning_tx is not checked from
Rx side in any way, so thread_common_ops can be modified to only address
the spinning_rx. This means that spinning_tx can be removed altogheter.
signal_tx_condition is never utilized, so simply remove it.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210329224316.17793-11-maciej.fijalkowski@intel.com
|
