| Age | Commit message (Collapse) | Author |
|---|
|
Introduce dynamic adjustment capabilities for fill_size and comp_size
parameters to support larger batch sizes beyond the previous 2K limit.
Update HW_SW_MAX_RING_SIZE test cases to evaluate AF_XDP's robustness by
pushing hardware and software ring sizes to their limits. This test
ensures AF_XDP's reliability amidst potential producer/consumer throttling
due to maximum ring utilization.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20240702055916.48071-3-tushar.vyavahare@intel.com
|
|
handling AF_XDP socket closures
Introduce a new function, set_ring_size(), to manage asynchronous AF_XDP
socket closure. Retry set_hw_ring_size up to SOCK_RECONF_CTR times if it
fails due to an active AF_XDP socket. Return an error immediately for
non-EBUSY errors. This enhances robustness against asynchronous AF_XDP
socket closures during ring size changes.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240402114529.545475-6-tushar.vyavahare@intel.com
|
|
Convert the constant BATCH_SIZE into a variable named batch_size to allow
dynamic modification at runtime. This is required for the forthcoming
changes to support testing different hardware ring sizes.
While running these tests, a bug was identified when the batch size is
roughly the same as the NIC ring size. This has now been addressed by
Maciej's fix in commit 913eda2b08cc ("i40e: xsk: remove count_mask").
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20240402114529.545475-3-tushar.vyavahare@intel.com
|
|
Add a new test for testing shared umem feature. This is accomplished by
adding a new XDP program and using the multiple sockets.
The new XDP program redirects the packets based on the destination MAC
address.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20230927135241.2287547-9-tushar.vyavahare@intel.com
|
|
Improve the receive_pkt() function to enable it to receive packets from
multiple sockets. Define a sock_num variable to iterate through all the
sockets in the Rx path. Add nb_valid_entries to check that all the
expected number of packets are received.
Revise the function __receive_pkts() to only inspect the receive ring
once, handle any received packets, and promptly return. Implement a bitmap
to store the value of number of sockets. Update Makefile to include
find_bit.c for compiling xskxceiver.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20230927135241.2287547-5-tushar.vyavahare@intel.com
|
|
Move the src_mac and dst_mac fields from the ifobject structure to the
xsk_socket_info structure to achieve per-socket MAC address assignment.
Require this in order to steer traffic to various sockets in subsequent
patches.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20230927135241.2287547-4-tushar.vyavahare@intel.com
|
|
Move the packet stream from the ifobject struct to the xsk_socket_info
struct to enable the use of different streams for different sockets. This
will facilitate the sending and receiving of data from multiple sockets
simultaneously using the SHARED_XDP_UMEM feature.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20230927135241.2287547-2-tushar.vyavahare@intel.com
|
|
Add a command line option to be able to run a single test. This option
(-t) takes a number from the list of tests available with the "-l"
option. Here are two examples:
Run test number 2, the "receive single packet" test in all available modes:
./test_xsk.sh -t 2
Run test number 21, the metadata copy test in skb mode only
./test_xsh.sh -t 21 -m skb
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-8-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Declare the test names statically in a struct so that we can refer to
them when adding the support to execute a single test in the next
commit. Before this patch, the names of them were not declared in a
single place which made it not possible to refer to them.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-6-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add an option -m on the command line that allows the user to run the
tests in a single mode instead of all of them. Valid modes are skb,
drv, and zc (zero-copy). An example:
To run test suite in drv mode only:
./test_xsk.sh -m drv
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230914084900.492-4-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a test that will exercise maximum number of supported fragments.
This number depends on mode of the test - for SKB and DRV it will be 18
whereas for ZC this is defined by a value from NETDEV_A_DEV_XDP_ZC_MAX_SEGS
netlink attribute.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # made use of new netlink attribute
Link: https://lore.kernel.org/r/20230719132421.584801-24-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Enable the already existing metadata copy test to also run in
multi-buffer mode with 9K packets.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-23-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a test that produces lots of nasty descriptors testing the corner
cases of the descriptor validation. Some of these descriptors are
valid and some are not as indicated by the valid flag. For a
description of all the test combinations, please see the code.
To stress the API, we need to be able to generate combinations of
descriptors that make little sense. A new verbatim mode is introduced
for the packet_stream to accomplish this. In this mode, all packets in
the packet_stream are sent as is. We do not try to chop them up into
frames that are of the right size that we know are going to work as we
would normally do. The packets are just written into the Tx ring even
if we know they make no sense.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> # adjusted valid flags for frags
Link: https://lore.kernel.org/r/20230719132421.584801-22-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a test for multi-buffer AF_XDP when using unaligned mode. The test
sends 4096 9K-buffers.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-21-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add the first basic multi-buffer test that sends a stream of 9K
packets and validates that they are received at the other end. In
order to enable sending and receiving multi-buffer packets, code that
sets the MTU is introduced as well as modifications to the XDP
programs so that they signal that they are multi-buffer enabled.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-20-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add the ability to send and receive packets that are larger than the
size of a umem frame, using the AF_XDP /XDP multi-buffer
support. There are three pieces of code that need to be changed to
achieve this: the Rx path, the Tx path, and the validation logic.
Both the Rx path and Tx could only deal with a single fragment per
packet. The Tx path is extended with a new function called
pkt_nb_frags() that can be used to retrieve the number of fragments a
packet will consume. We then create these many fragments in a loop and
fill the N-1 first ones to the max size limit to use the buffer space
efficiently, and the Nth one with whatever data that is left. This
goes on until we have filled in at the most BATCH_SIZE worth of
descriptors and fragments. If we detect that the next packet would
lead to BATCH_SIZE number of fragments sent being exceeded, we do not
send this packet and finish the batch. This packet is instead sent in
the next iteration of BATCH_SIZE fragments.
For Rx, we loop over all fragments we receive as usual, but for every
descriptor that we receive we call a new validation function called
is_frag_valid() to validate the consistency of this fragment. The code
then checks if the packet continues in the next frame. If so, it loops
over the next packet and performs the same validation. once we have
received the last fragment of the packet we also call the function
is_pkt_valid() to validate the packet as a whole. If we get to the end
of the batch and we are not at the end of the current packet, we back
out the partial packet and end the loop. Once we get into the receive
loop next time, we start over from the beginning of that packet. This
so the code becomes simpler at the cost of some performance.
The validation function is_frag_valid() checks that the sequence and
packet numbers are correct at the start and end of each fragment.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230719132421.584801-19-maciej.fijalkowski@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Modify the packet pacing algorithm so that it works with multi-buffer
packets. This algorithm makes sure we do not send too many buffers to
the receiving thread so that packets have to be dropped. The previous
algorithm made the assumption that each packet only consumes one
buffer, but that is not true anymore when multi-buffer support gets
added. Instead, we find out what the largest packet size is in the
packet stream and assume that each packet will consume this many
buffers. This is conservative and overly cautious as there might be
smaller packets in the stream that need fewer buffers per packet. But
it keeps the algorithm simple.
Also simplify it by removing the pthread conditional and just test if
there is enough space in the Rx thread before trying to send one more
batch. Also makes the tests run faster.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-11-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Test for hugepages only once at the beginning of the execution of the
whole test suite, instead of before each test that needs huge
pages. These are the tests that use unaligned mode. As more unaligned
tests will be added, so the current system just does not scale.
With this change, there are now three possible outcomes of a test run:
fail, pass, or skip. To simplify the handling of this, the function
testapp_validate_traffic() now returns this value to the main loop. As
this function is used by nearly all tests, it meant a small change to
most of them.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-8-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Store the offset in struct pkt instead of the address. This is
important since address is only meaningful in the context of a packet
that is stored in a single umem buffer and thus a single Tx
descriptor. If the packet, in contrast need to be represented by
multiple buffers in the umem, storing the address makes no sense since
the packet will consist of multiple buffers in the umem at various
addresses. This change is in preparation for the upcoming
multi-buffer support in AF_XDP and the corresponding tests.
So instead of indicating the address, we instead indicate the offset
of the packet in the first buffer. The actual address of the buffer is
allocated from the umem with a new function called
umem_alloc_buffer(). This also means we can get rid of the
use_fill_for_addr flag as the addresses fed into the fill ring will
always be the offset from the pkt specification in the packet stream
plus the address of the allocated buffer from the umem. No special
casing needed.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-7-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Convert the current variable rx_pkt_nb to an iterator that can be used
for both Rx and Tx. This to simplify the code and making Tx more like
Rx that already has this feature.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-6-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Dump the content of the packet when a test finds that packets are
received out of order, the length is wrong, or some other packet
error. Use the already existing pkt_dump function for this and call it
when the above errors are detected. Get rid of the command line option
for dumping packets as it is not useful to print out thousands of
good packets followed by the faulty one you would like to see.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-5-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a varying payload pattern within the packet. Instead of having
just a packet number that is the same for all words in a packet, make
each word different in the packet. The upper 16-bits are set to the
packet number and the lower 16-bits are the sequence number of the
words in this packet. So the 3rd packet's 5th 32-bit word of data will
contain the number (2<<32) | 4 as they are numbered from 0.
This will make it easier to detect fragments that are out of order
when starting to test multi-buffer support.
The member payload in the packet is renamed pkt_nb to reflect that it
is now only a pkt_nb, not the real payload as seen above.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-4-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Implement support for generating pkts with variable length. Before
this patch, they were all 64 bytes, exception for some packets of zero
length and some that were too large. This feature will be used to test
multi-buffer support for which large packets are needed.
The packets are also made simpler, just a valid Ethernet header
followed by a sequence number. This so that it will become easier to
implement packet generation when each packet consists of multiple
fragments. There is also a maintenance burden associated with carrying
all this code for generating proper UDP/IP packets, especially since
they are not needed.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230516103109.3066-3-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Fix the unmapping of hugepage allocated umems so that they are
properly unmapped. The new test referred to in the fixes label,
introduced a test that allocated a umem that is not a multiple of a 2M
hugepage size. This is fine for mmap() that rounds the size up the
nearest multiple of 2M. But munmap() requires the size to be a
multiple of the hugepage size in order for it to unmap the region. The
current behaviour of not properly unmapping the umem, was discovered
when further additions of tests that require hugepages (unaligned mode
tests only) started failing as the system was running out of
hugepages.
Fixes: c0801598e543 ("selftests: xsk: Add test UNALIGNED_INV_DESC_4K1_FRAME_SIZE")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230418143617.27762-1-magnus.karlsson@gmail.com
|
|
Add unaligned descriptor test for frame size of 4001. Using an odd frame
size ensures that the end of the UMEM is not near a page boundary. This
allows testing descriptors that staddle the end of the UMEM but not a
page.
This test used to fail without the previous commit ("xsk: Fix unaligned
descriptor validation").
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Link: https://lore.kernel.org/r/20230405235920.7305-3-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Avoid UMEM_SIZE macro in testapp_invalid_desc which is incorrect when
the frame size is not XSK_UMEM__DEFAULT_FRAME_SIZE. Also remove the
macro since it's no longer being used.
Fixes: 909f0e28207c ("selftests: xsk: Add tests for 2K frame size")
Signed-off-by: Kal Conley <kal.conley@dectris.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/r/20230403145047.33065-2-kal.conley@dectris.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
|
|
Add a new test in copy-mode for testing the copying of metadata from the
buffer in kernel-space to user-space. This is accomplished by adding a
new XDP program and using the bss map to store a counter that is written
to the metadata field. This counter is incremented for every packet so
that the number becomes unique and should be the same as the payload. It
is store in the bss so the value can be reset between runs.
The XDP program populates the metadata and the userspace program checks
the value stored in the metadata field against the payload using the new
is_metadata_correct() function. To turn this verification on or off, add
a new parameter (use_metadata) to the ifobject structure.
Signed-off-by: Tushar Vyavahare <tushar.vyavahare@intel.com>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230320102705.306187-1-tushar.vyavahare@intel.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Implement automatic switching of XDP programs and execution modes if
needed by a test. This makes it much simpler to write a test as it
only has to say what XDP program it needs if it is not the default
one. This also makes it possible to remove the initial explicit
attachment of the XDP program as well as the explicit mode switch in
the code. These are now handled by the same code that just checks if a
switch is necessary, so no special cases are needed.
The default XDP program for all tests is one that sends all packets to
the AF_XDP socket. If you need another one, please use the new
function test_spec_set_xdp_prog() to specify what XDP programs and
maps to use for this test.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-16-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Add a new test where some of the packets are not passed to the AF_XDP
socket and instead get a XDP_DROP verdict. This is important as it
tests the recycling mechanism of the buffer pool. If a packet is not
sent to the AF_XDP socket, the buffer the packet resides in is instead
recycled so it can be used again without the round-trip to user
space. The test introduces a new XDP program that drops every other
packet.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-13-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Get rid of the built-in XDP program that was part of the old libbpf
code in xsk.c and replace it with an eBPF program build using the
framework by all the other bpf selftests. This will form the base for
adding more programs in later commits.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-12-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Load and attach the XDP program only once per XDP mode that is being
executed. Today, the XDP program is loaded and attached for every
test, then unloaded, which takes a long time on real NICs, since they
have to reconfigure their HW, in contrast to veth. The test suite now
completes in 21 seconds, instead of 207 seconds previously on my
machine. This is a speed-up of around 10x.
This is accomplished by moving the XDP loading from the worker threads
to the main thread and replacing the XDP loading interfaces of xsk.c
that was taken from the xsk support in libbpf, with something more
explicit that is more useful for these tests. Instead, the relevant
file descriptors and ifindexes are just passed down to the new
functions.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-10-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Remove the namespaces used as they fill no function. This will
simplify the code for speeding up the tests in the following commits.
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/r/20230111093526.11682-9-magnus.karlsson@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
Introduce new mode to xdpxceiver responsible for testing AF_XDP zero
copy support of driver that serves underlying physical device. When
setting up test suite, determine whether driver has ZC support or not by
trying to bind XSK ZC socket to the interface. If it succeeded,
interpret it as ZC support being in place and do softirq and busy poll
tests for zero copy mode.
Note that Rx dropped tests are skipped since ZC path is not touching
rx_dropped stat at all.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220901114813.16275-7-maciej.fijalkowski@intel.com
|
|
Currently, architecture of xdpxceiver is designed strictly for
conducting veth based tests. Veth pair is created together with a
network namespace and one of the veth interfaces is moved to the
mentioned netns. Then, separate threads for Tx and Rx are spawned which
will utilize described setup.
Infrastructure described in the paragraph above can not be used for
testing AF_XDP support on physical devices. That testing will be
conducted on a single network interface and same queue. Xskxceiver
needs to be extended to distinguish between veth tests and physical
interface tests.
Since same iface/queue id pair will be used by both Tx/Rx threads for
physical device testing, Tx thread, which happen to run after the Rx
thread, is going to create XSK socket with shared umem flag. In order to
track this setting throughout the lifetime of spawned threads, introduce
'shared_umem' boolean variable to struct ifobject and set it to true
when xdpxceiver is run against physical device. In such case, UMEM size
needs to be doubled, so half of it will be used by Rx thread and other
half by Tx thread. For two step based test types, value of XSKMAP
element under key 0 has to be updated as there is now another socket for
the second step. Also, to avoid race conditions when destroying XSK
resources, move this activity to the main thread after spawned Rx and Tx
threads have finished its job. This way it is possible to gracefully
remove shared umem without introducing synchronization mechanisms.
To run xsk selftests suite on physical device, append "-i $IFACE" when
invoking test_xsk.sh. For veth based tests, simply skip it. When "-i
$IFACE" is in place, under the hood test_xsk.sh will use $IFACE for both
interfaces supplied to xdpxceiver, which in turn will interpret that
this execution of test suite is for a physical device.
Note that currently this makes it possible only to test SKB and DRV mode
(in case underlying device has native XDP support). ZC testing support
is added in a later patch.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220901114813.16275-5-maciej.fijalkowski@intel.com
|
|
So that "enp240s0f0" or such name can be used against xskxceiver.
While at it, also extend character count for netns name.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220901114813.16275-4-maciej.fijalkowski@intel.com
|
|
In order to prepare xdpxceiver for physical device testing, let us
introduce default Rx pkt stream. Reason for doing it is that physical
device testing will use a UMEM with a doubled size where half of it will
be used by Tx and other half by Rx. This means that pkt addresses will
differ for Tx and Rx streams. Rx thread will initialize the
xsk_umem_info::base_addr that is added here so that pkt_set(), when
working on Rx UMEM will add this offset and second half of UMEM space
will be used. Note that currently base_addr is 0 on both sides. Future
commit will do the mentioned initialization.
Previously, veth based testing worked on separate UMEMs, so single
default stream was fine.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Link: https://lore.kernel.org/bpf/20220901114813.16275-3-maciej.fijalkowski@intel.com
|
|
Poll test case was not testing all the functionality of the poll feature
in the test suite. This patch updates the poll test case which contains 2
test cases to test the RX and the TX poll functionality and additional 2
more test cases to check the timeout feature of the poll event.
Poll test suite has 4 test cases:
1. TEST_TYPE_RX_POLL: Check if RX path POLLIN function works as expect.
TX path can use any method to send the traffic.
2. TEST_TYPE_TX_POLL: Check if TX path POLLOUT function works as expect.
RX path can use any method to receive the traffic.
3. TEST_TYPE_POLL_RXQ_EMPTY: Call poll function with parameter POLLIN on
empty RX queue will cause timeout. If timeout then test case passes.
4. TEST_TYPE_POLL_TXQ_FULL: When TX queue is filled and packets are not
cleaned by the kernel then if we invoke the poll function with POLLOUT
it should trigger timeout.
Signed-off-by: Shibin Koikkara Reeny <shibin.koikkara.reeny@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Link: https://lore.kernel.org/bpf/20220803144354.98122-1-shibin.koikkara.reeny@intel.com
|
|
Recently, xsk part of libbpf was moved to selftests/bpf directory and
lives on its own because there is an AF_XDP testing application that
needs it called xdpxceiver. That name makes it a bit hard to indicate
who maintains it as there are other XDP samples in there, whereas this
one is strictly about AF_XDP.
Do s/xdpxceiver/xskxceiver so that it will be easier to figure out who
maintains it. A follow-up patch will correct MAINTAINERS file.
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220707111613.49031-2-maciej.fijalkowski@intel.com
|
