| Age | Commit message (Collapse) | Author |
|---|
|
Print out the index of mismatching XSAVE bytes using unsigned decimal
format. Some versions of clang complain about trying to print an integer
as an unsigned char.
x86/sev_smoke_test.c:55:51: error: format specifies type 'unsigned char'
but the argument has type 'int' [-Werror,-Wformat]
Fixes: 8c53183dbaa2 ("selftests: kvm: add test for transferring FPU state into VMSA")
Link: https://lore.kernel.org/r/20250228233852.3855676-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
During the initial mprotect(RO) stage of mmu_stress_test, keep vCPUs
spinning until all vCPUs have hit -EFAULT, i.e. until all vCPUs have tried
to write to a read-only page. If a vCPU manages to complete an entire
iteration of the loop without hitting a read-only page, *and* the vCPU
observes mprotect_ro_done before starting a second iteration, then the
vCPU will prematurely fall through to GUEST_SYNC(3) (on x86 and arm64) and
get out of sequence.
Replace the "do-while (!r)" loop around the associated _vcpu_run() with
a single invocation, as barring a KVM bug, the vCPU is guaranteed to hit
-EFAULT, and retrying on success is super confusion, hides KVM bugs, and
complicates this fix. The do-while loop was semi-unintentionally added
specifically to fudge around a KVM x86 bug, and said bug is unhittable
without modifying the test to force x86 down the !(x86||arm64) path.
On x86, if forced emulation is enabled, vcpu_arch_put_guest() may trigger
emulation of the store to memory. Due a (very, very) longstanding bug in
KVM x86's emulator, emulate writes to guest memory that fail during
__kvm_write_guest_page() unconditionally return KVM_EXIT_MMIO. While that
is desirable in the !memslot case, it's wrong in this case as the failure
happens due to __copy_to_user() hitting a read-only page, not an emulated
MMIO region.
But as above, x86 only uses vcpu_arch_put_guest() if the __x86_64__ guards
are clobbered to force x86 down the common path, and of course the
unexpected MMIO is a KVM bug, i.e. *should* cause a test failure.
Fixes: b6c304aec648 ("KVM: selftests: Verify KVM correctly handles mprotect(PROT_READ)")
Reported-by: Yan Zhao <yan.y.zhao@intel.com>
Closes: https://lore.kernel.org/all/20250208105318.16861-1-yan.y.zhao@intel.com
Debugged-by: Yan Zhao <yan.y.zhao@intel.com>
Reviewed-by: Yan Zhao <yan.y.zhao@intel.com>
Tested-by: Yan Zhao <yan.y.zhao@intel.com>
Link: https://lore.kernel.org/r/20250228230804.3845860-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add an L1 (guest) assert to the nested exceptions test to verify that KVM
doesn't put VMRUN in an STI shadow (AMD CPUs bleed the shadow into the
guest's int_state if a #VMEXIT occurs before VMRUN fully completes).
Add a similar assert to the VMX side as well, because why not.
Reviewed-by: Jim Mattson <jmattson@google.com>
Link: https://lore.kernel.org/r/20250224165442.2338294-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add testcases to x86's Hyper-V CPUID test to verify that KVM advertises
support for features that require an in-kernel local APIC appropriately,
i.e. that KVM hides support from the vCPU-scoped ioctl if the VM doesn't
have an in-kernel local APIC.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250118003454.2619573-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Allocate, get, and free the CPUID array in the Hyper-V CPUID test in the
test's core helper, instead of copy+pasting code at each call site. In
addition to deduplicating a small amount of code, restricting visibility
of the array to a single invocation of the core test prevents "leaking" an
array across test cases. Passing in @vcpu to the helper will also allow
pivoting on VM-scoped information without needing to pass more booleans,
e.g. to conditionally assert on features that require an in-kernel APIC.
To avoid use-after-free bugs due to overzealous and careless developers,
opportunstically add a comment to explain that the system-scoped helper
caches the Hyper-V CPUID entries, i.e. that the caller is not responsible
for freeing the memory.
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250118003454.2619573-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Make the Hyper-V CPUID test's local helper test_hv_cpuid_e2big() static,
it's not used outside of the test (and isn't intended to be).
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Link: https://lore.kernel.org/r/20250118003454.2619573-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
There is a spelling mistake in a literal string and in the function
test_get_inital_dirty. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Message-ID: <20250204105647.367743-1-colin.i.king@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In some rare situations a non default storage key is already set on the
memory used by the test. Within normal VMs the key is reset / zapped
when the memory is added to the VM. This is not the case for ucontrol
VMs. With the initial iske check removed this test case can work in all
situations. The function of the iske instruction is still validated by
the remaining code.
Fixes: 0185fbc6a2d3 ("KVM: s390: selftests: Add uc_skey VM test case")
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20250128131803.1047388-1-schlameuss@linux.ibm.com
Message-ID: <20250128131803.1047388-1-schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
With the latest patch, attempting to create a memslot from userspace
will result in an EEXIST error for UCONTROL VMs, instead of EINVAL,
since the new memslot will collide with the internal memslot. There is
no simple way to bring back the previous behaviour.
This is not a problem, but the test needs to be fixed accordingly.
Reviewed-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Link: https://lore.kernel.org/r/20250123144627.312456-5-imbrenda@linux.ibm.com
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-ID: <20250123144627.312456-5-imbrenda@linux.ibm.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull KVM/arm64 updates from Will Deacon:
"New features:
- Support for non-protected guest in protected mode, achieving near
feature parity with the non-protected mode
- Support for the EL2 timers as part of the ongoing NV support
- Allow control of hardware tracing for nVHE/hVHE
Improvements, fixes and cleanups:
- Massive cleanup of the debug infrastructure, making it a bit less
awkward and definitely easier to maintain. This should pave the way
for further optimisations
- Complete rewrite of pKVM's fixed-feature infrastructure, aligning
it with the rest of KVM and making the code easier to follow
- Large simplification of pKVM's memory protection infrastructure
- Better handling of RES0/RES1 fields for memory-backed system
registers
- Add a workaround for Qualcomm's Snapdragon X CPUs, which suffer
from a pretty nasty timer bug
- Small collection of cleanups and low-impact fixes"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (87 commits)
arm64/sysreg: Get rid of TRFCR_ELx SysregFields
KVM: arm64: nv: Fix doc header layout for timers
KVM: arm64: nv: Apply RESx settings to sysreg reset values
KVM: arm64: nv: Always evaluate HCR_EL2 using sanitising accessors
KVM: arm64: Fix selftests after sysreg field name update
coresight: Pass guest TRFCR value to KVM
KVM: arm64: Support trace filtering for guests
KVM: arm64: coresight: Give TRBE enabled state to KVM
coresight: trbe: Remove redundant disable call
arm64/sysreg/tools: Move TRFCR definitions to sysreg
tools: arm64: Update sysreg.h header files
KVM: arm64: Drop pkvm_mem_transition for host/hyp donations
KVM: arm64: Drop pkvm_mem_transition for host/hyp sharing
KVM: arm64: Drop pkvm_mem_transition for FF-A
KVM: arm64: Explicitly handle BRBE traps as UNDEFINED
KVM: arm64: vgic: Use str_enabled_disabled() in vgic_v3_probe()
arm64: kvm: Introduce nvhe stack size constants
KVM: arm64: Fix nVHE stacktrace VA bits mask
KVM: arm64: Fix FEAT_MTE in pKVM
Documentation: Update the behaviour of "kvm-arm.mode"
...
|
|
KVM/riscv changes for 6.14
- Svvptc, Zabha, and Ziccrse extension support for Guest/VM
- Virtualize SBI system suspend extension for Guest/VM
- Trap related exit statstics as SBI PMU firmware counters for Guest/VM
|
|
KVM x86 misc changes for 6.14:
- Overhaul KVM's CPUID feature infrastructure to track all vCPU capabilities
instead of just those where KVM needs to manage state and/or explicitly
enable the feature in hardware. Along the way, refactor the code to make
it easier to add features, and to make it more self-documenting how KVM
is handling each feature.
- Rework KVM's handling of VM-Exits during event vectoring; this plugs holes
where KVM unintentionally puts the vCPU into infinite loops in some scenarios
(e.g. if emulation is triggered by the exit), and brings parity between VMX
and SVM.
- Add pending request and interrupt injection information to the kvm_exit and
kvm_entry tracepoints respectively.
- Fix a relatively benign flaw where KVM would end up redoing RDPKRU when
loading guest/host PKRU, due to a refactoring of the kernel helpers that
didn't account for KVM's pre-checking of the need to do WRPKRU.
|
|
* kvm-arm64/coresight-6.14:
: .
: Trace filtering update from James Clark. From the cover letter:
:
: "The guest filtering rules from the Perf session are now honored for both
: nVHE and VHE modes. This is done by either writing to TRFCR_EL12 at the
: start of the Perf session and doing nothing else further, or caching the
: guest value and writing it at guest switch for nVHE. In pKVM, trace is
: now be disabled for both protected and unprotected guests."
: .
KVM: arm64: Fix selftests after sysreg field name update
coresight: Pass guest TRFCR value to KVM
KVM: arm64: Support trace filtering for guests
KVM: arm64: coresight: Give TRBE enabled state to KVM
coresight: trbe: Remove redundant disable call
arm64/sysreg/tools: Move TRFCR definitions to sysreg
tools: arm64: Update sysreg.h header files
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson into HEAD
LoongArch KVM changes for v6.14
1. Clear LLBCTL if secondary mmu mapping changed.
2. Add hypercall service support for usermode VMM.
This is a really small changeset, because the Chinese New Year
(Spring Festival) is coming. Happy New Year!
|
|
Fix KVM selftests that check for EL0's 64bit-ness, and use a now
removed definition. Kindly point them at the new one.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD
KVM: s390: three small bugfixes
Fix a latent bug when the kernel is compiled in debug mode.
Two small UCONTROL fixes and their selftests.
|
|
Fixup the uc_attr_mem_limit test case to also cover the
KVM_HAS_DEVICE_ATTR ioctl.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Tested-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241216092140.329196-7-schlameuss@linux.ibm.com
Message-ID: <20241216092140.329196-7-schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add a selftests for the interrupt routing configuration when using
ucontrol VMs.
Calling the test may trigger a null pointer dereferences on kernels not
containing the fixes in this patch series.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Tested-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241216092140.329196-5-schlameuss@linux.ibm.com
Message-ID: <20241216092140.329196-5-schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
Add some superficial selftests for the floating interrupt controller
when using ucontrol VMs. These tests are intended to cover very basic
calls only.
Some of the calls may trigger null pointer dereferences on kernels not
containing the fixes in this patch series.
Signed-off-by: Christoph Schlameuss <schlameuss@linux.ibm.com>
Tested-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Hariharan Mari <hari55@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241216092140.329196-3-schlameuss@linux.ibm.com
Message-ID: <20241216092140.329196-3-schlameuss@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
|
|
The KVM RISC-V allows Svvptc/Zabha/Ziccrse extensions for Guest/VM
so add them to get-reg-list test.
Signed-off-by: Quan Zhou <zhouquan@iscas.ac.cn>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/35163f0443993a942e0a021c6006bc5d2f0f5d5f.1732854096.git.zhouquan@iscas.ac.cn
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
KVM supports SBI SUSP, so add it to the get-reg-list test.
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Link: https://lore.kernel.org/r/20241017074538.18867-6-ajones@ventanamicro.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
Extend the 'set_memory_region_test' with an x86-only test case which
covers emulated MMIO during event vectoring error handling. The test case
1) Sets an IDT descriptor base to point to an MMIO address
2) Generates a #GP in the guest
3) Verifies userspace gets the correct exit reason, suberror code, and
GPA in internal.data[3]
Opportunistically add a definition for a non-canonical address to
processor.h so that the source of the #GP is somewhat self-documenting,
and so that future tests don't have to reinvent the wheel.
Signed-off-by: Ivan Orlov <iorlov@amazon.com>
Link: https://lore.kernel.org/r/20241217181458.68690-8-iorlov@amazon.com
[sean: massage changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Implement a function for setting the IDT descriptor from the guest
code. Replace the existing lidt occurrences with calls to this function
as `lidt` is used in multiple places.
Signed-off-by: Ivan Orlov <iorlov@amazon.com>
Link: https://lore.kernel.org/r/20241217181458.68690-7-iorlov@amazon.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rework x86's KVM PV features test to align with KVM's new, fixed behavior
of not allowing userspace to disable HLT-exiting after vCPUs have been
created. Rework the core testcase to disable HLT-exiting before creating
a vCPU, and opportunistically modify keep the paired VM+vCPU creation to
verify that KVM rejects KVM_CAP_X86_DISABLE_EXITS as expected.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-18-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Actually check for KVM support for disabling HLT-exiting instead of
effectively checking that KVM_CAP_X86_DISABLE_EXITS is #defined to a
non-zero value, and convert the TEST_REQUIRE() to a simple return so
that only the sub-test is skipped if HLT-exiting is mandatory.
The goof has likely gone unnoticed because all x86 CPUs support disabling
HLT-exiting, only systems with the opt-in mitigate_smt_rsb KVM module
param disallow HLT-exiting.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-17-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Extend x86's set sregs test to verify that KVM sets/clears OSXSAVE and
OSKPKE according to CR4.XSAVE and CR4.PKE respectively. For performance
reasons, KVM is responsible for emulating the architectural behavior of
the OS CPUID bits tracking CR4.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Refresh selftests' CPUID cache in the vCPU structure when querying a CPUID
entry so that tests don't consume stale data when KVM modifies CPUID as a
side effect to a completely unrelated change. E.g. KVM adjusts OSXSAVE in
response to CR4.OSXSAVE changes.
Unnecessarily invoking KVM_GET_CPUID is suboptimal, but vcpu->cpuid exists
to simplify selftests development, not for performance reasons. And,
unfortunately, trying to handle the side effects in tests or other flows
is unpleasant, e.g. selftests could manually refresh if KVM_SET_SREGS is
successful, but that would still leave a gap with respect to guest CR4
changes.
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a sanity check in __vcpu_get_cpuid_entry() to provide a friendlier
error than a segfault when a test developer tries to use a vCPU CPUID
helper on a barebones vCPU.
Link: https://lore.kernel.org/r/20241128013424.4096668-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rework x86's set sregs test to verify that KVM enforces CPUID vs. CR4
features even if userspace hasn't explicitly set guest CPUID. KVM used to
allow userspace to set any KVM-supported CR4 value prior to KVM_SET_CPUID2,
and the test verified that behavior.
However, the testcase was written purely to verify KVM's existing behavior,
i.e. was NOT written to match the needs of real world VMMs.
Opportunistically verify that KVM continues to reject unsupported features
after KVM_SET_CPUID2 (using KVM_GET_SUPPORTED_CPUID).
Reviewed-by: Maxim Levitsky <mlevitsk@redhat.com>
Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com>
Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com>
Link: https://lore.kernel.org/r/20241128013424.4096668-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Now that KVM selftests uses the kernel's canonical arch paths, directly
override ARCH to 'x86' when targeting x86_64 instead of defining ARCH_DIR
to redirect to appropriate paths. ARCH_DIR was originally added to deal
with KVM selftests using the target triple ARCH for directories, e.g.
s390x and aarch64; keeping it around just to deal with the one-off alias
from x86_64=>x86 is unnecessary and confusing.
Note, even when selftests are built from the top-level Makefile, ARCH is
scoped to KVM's makefiles, i.e. overriding ARCH won't trip up some other
selftests that (somehow) expects x86_64 and can't work with x86.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20241128005547.4077116-17-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use the kernel's canonical $(ARCH) paths instead of the raw target triple
for KVM selftests directories. KVM selftests are quite nearly the only
place in the entire kernel that using the target triple for directories,
tools/testing/selftests/drivers/s390x being the lone holdout.
Using the kernel's preferred nomenclature eliminates the minor, but
annoying, friction of having to translate to KVM's selftests directories,
e.g. for pattern matching, opening files, running selftests, etc.
Opportunsitically delete file comments that reference the full path of the
file, as they are obviously prone to becoming stale, and serve no known
purpose.
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Acked-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20241128005547.4077116-16-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Provide empty targets for KVM selftests if the target architecture is
unsupported to make it obvious which architectures are supported, and so
that various side effects don't fail and/or do weird things, e.g. as is,
"mkdir -p $(sort $(dir $(TEST_GEN_PROGS)))" fails due to a missing operand,
and conversely, "$(shell mkdir -p $(sort $(OUTPUT)/$(ARCH_DIR) ..." will
create an empty, useless directory for the unsupported architecture.
Move the guts of the Makefile to Makefile.kvm so that it's easier to see
that the if-statement effectively guards all of KVM selftests.
Reported-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Acked-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20241128005547.4077116-15-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add two phases to mmu_stress_test to verify that KVM correctly handles
guest memory that was writable, and then made read-only in the primary MMU,
and then made writable again.
Add bonus coverage for x86 and arm64 to verify that all of guest memory was
marked read-only. Making forward progress (without making memory writable)
requires arch specific code to skip over the faulting instruction, but the
test can at least verify each vCPU's starting page was made read-only for
other architectures.
Link: https://lore.kernel.org/r/20241128005547.4077116-14-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Add a third phase of mmu_stress_test to verify that mprotect()ing guest
memory to make it read-only doesn't cause explosions, e.g. to verify KVM
correctly handles the resulting mmu_notifier invalidations.
Reviewed-by: James Houghton <jthoughton@google.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20241128005547.4077116-13-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Run the exact number of guest loops required in mmu_stress_test instead
of looping indefinitely in anticipation of adding more stages that run
different code (e.g. reads instead of writes).
Reviewed-by: James Houghton <jthoughton@google.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20241128005547.4077116-12-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Use vcpu_arch_put_guest() to write memory from the guest in
mmu_stress_test as an easy way to provide a bit of extra coverage.
Reviewed-by: James Houghton <jthoughton@google.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20241128005547.4077116-11-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Enable the mmu_stress_test on arm64. The intent was to enable the test
across all architectures when it was first added, but a few goofs made it
unrunnable on !x86. Now that those goofs are fixed, at least for arm64,
enable the test.
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Marc Zyngier <maz@kernel.org>
Reviewed-by: James Houghton <jthoughton@google.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20241128005547.4077116-10-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Explicitly include ucall_common.h in the MMU stress test, as unlike arm64
and x86-64, RISC-V doesn't include ucall_common.h in its processor.h, i.e.
this will allow enabling the test on RISC-V.
Reported-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20241128005547.4077116-9-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Create mmu_stress_tests's VM with the correct number of extra pages needed
to map all of memory in the guest. The bug hasn't been noticed before as
the test currently runs only on x86, which maps guest memory with 1GiB
pages, i.e. doesn't need much memory in the guest for page tables.
Reviewed-by: James Houghton <jthoughton@google.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20241128005547.4077116-8-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Try to get/set SREGS in mmu_stress_test only when running on x86, as the
ioctls are supported only by x86 and PPC, and the latter doesn't yet
support KVM selftests.
Reviewed-by: James Houghton <jthoughton@google.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20241128005547.4077116-7-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Rename max_guest_memory_test to mmu_stress_test so that the name isn't
horribly misleading when future changes extend the test to verify things
like mprotect() interactions, and because the test is useful even when its
configured to populate far less than the maximum amount of guest memory.
Reviewed-by: James Houghton <jthoughton@google.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20241128005547.4077116-6-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Don't check for an unhandled exception if KVM_RUN failed, e.g. if it
returned errno=EFAULT, as reporting unhandled exceptions is done via a
ucall, i.e. requires KVM_RUN to exit cleanly. Theoretically, checking
for a ucall on a failed KVM_RUN could get a false positive, e.g. if there
were stale data in vcpu->run from a previous exit.
Reviewed-by: James Houghton <jthoughton@google.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20241128005547.4077116-5-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Assert that the register being read/written by vcpu_{g,s}et_reg() is no
larger than a uint64_t, i.e. that a selftest isn't unintentionally
truncating the value being read/written.
Ideally, the assert would be done at compile-time, but that would limit
the checks to hardcoded accesses and/or require fancier compile-time
assertion infrastructure to filter out dynamic usage.
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20241128005547.4077116-4-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
Return a uint64_t from vcpu_get_reg() instead of having the caller provide
a pointer to storage, as none of the vcpu_get_reg() usage in KVM selftests
accesses a register larger than 64 bits, and vcpu_set_reg() only accepts a
64-bit value. If a use case comes along that needs to get a register that
is larger than 64 bits, then a utility can be added to assert success and
take a void pointer, but until then, forcing an out param yields ugly code
and prevents feeding the output of vcpu_get_reg() into vcpu_set_reg().
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20241128005547.4077116-3-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
|
|
In commit 03c7527e97f7 ("KVM: arm64: Do not allow ID_AA64MMFR0_EL1.ASIDbits
to be overridden") we made that bitfield in the ID registers unwritable
however the change neglected to make the corresponding update to set_id_regs
resulting in it failing:
ok 56 ID_AA64MMFR0_EL1_BIGEND
==== Test Assertion Failure ====
aarch64/set_id_regs.c:434: masks[idx] & ftr_bits[j].mask == ftr_bits[j].mask
pid=5566 tid=5566 errno=22 - Invalid argument
1 0x00000000004034a7: test_vm_ftr_id_regs at set_id_regs.c:434
2 0x0000000000401b53: main at set_id_regs.c:684
3 0x0000ffff8e6b7543: ?? ??:0
4 0x0000ffff8e6b7617: ?? ??:0
5 0x0000000000401e6f: _start at ??:?
not ok 8 selftests: kvm: set_id_regs # exit=254
Remove ID_AA64MMFR1_EL1.ASIDBITS from the set of bitfields we test for
writeability.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20241216-kvm-arm64-fix-set-id-asidbits-v1-1-8b105b888fc3@kernel.org
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
|
|
KVM/riscv changes for 6.13 part #2
- Svade and Svadu extension support for Host and Guest/VM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux into HEAD
RISC-V Paches for the 6.13 Merge Window, Part 1
* Support for pointer masking in userspace,
* Support for probing vector misaligned access performance.
* Support for qspinlock on systems with Zacas and Zabha.
|
|
Update the get-reg-list test to test the Svade and Svadu Extensions are
available for guest OS.
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/20240726084931.28924-6-yongxuan.wang@sifive.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 changes for 6.13, part #1
- Support for stage-1 permission indirection (FEAT_S1PIE) and
permission overlays (FEAT_S1POE), including nested virt + the
emulated page table walker
- Introduce PSCI SYSTEM_OFF2 support to KVM + client driver. This call
was introduced in PSCIv1.3 as a mechanism to request hibernation,
similar to the S4 state in ACPI
- Explicitly trap + hide FEAT_MPAM (QoS controls) from KVM guests. As
part of it, introduce trivial initialization of the host's MPAM
context so KVM can use the corresponding traps
- PMU support under nested virtualization, honoring the guest
hypervisor's trap configuration and event filtering when running a
nested guest
- Fixes to vgic ITS serialization where stale device/interrupt table
entries are not zeroed when the mapping is invalidated by the VM
- Avoid emulated MMIO completion if userspace has requested synchronous
external abort injection
- Various fixes and cleanups affecting pKVM, vCPU initialization, and
selftests
|
|
- Drop obsolete references to PPC970 KVM, which was removed 10 years ago.
- Fix incorrect references to non-existing ioctls
- List registers supported by KVM_GET/SET_ONE_REG on s390
- Use rST internal links
- Reorganize the introduction to the API document
|
