summaryrefslogtreecommitdiff
path: root/tools/testing/selftests/net/mptcp/mptcp_join.sh
AgeCommit message (Collapse)Author
2024-02-26selftests: mptcp: join: add ss mptcp support checkGeliang Tang
Commands 'ss -M' are used in script mptcp_join.sh to display only MPTCP sockets. So it must be checked if ss tool supports MPTCP in this script. Fixes: e274f7154008 ("selftests: mptcp: add subflow limits test-cases") Cc: stable@vger.kernel.org Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-7-162e87e48497@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-26selftests: mptcp: rm subflow with v4/v4mapped addrGeliang Tang
Now both a v4 address and a v4-mapped address are supported when destroying a userspace pm subflow, this patch adds a second subflow to "userspace pm add & remove address" test, and two subflows could be removed two different ways, one with the v4mapped and one with v4. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/387 Fixes: 48d73f609dcc ("selftests: mptcp: update userspace pm addr tests") Cc: stable@vger.kernel.org Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn> Reviewed-by: Mat Martineau <martineau@kernel.org> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240223-upstream-net-20240223-misc-fixes-v1-2-162e87e48497@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01selftests: mptcp: join: stop transfer when check is done (part 2)Matthieu Baerts (NGI0)
Since the "Fixes" commits mentioned below, the newly added "userspace pm" subtests of mptcp_join selftests are launching the whole transfer in the background, do the required checks, then wait for the end of transfer. There is no need to wait longer, especially because the checks at the end of the transfer are ignored (which is fine). This saves quite a few seconds on slow environments. While at it, use 'mptcp_lib_kill_wait()' helper everywhere, instead of on a specific one with 'kill_tests_wait()'. Fixes: b2e2248f365a ("selftests: mptcp: userspace pm create id 0 subflow") Fixes: e3b47e460b4b ("selftests: mptcp: userspace pm remove initial subflow") Fixes: b9fb176081fb ("selftests: mptcp: userspace pm send RM_ADDR for ID 0") Cc: stable@vger.kernel.org Reviewed-and-tested-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-9-4c1c11e571ff@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-02-01selftests: mptcp: join: stop transfer when check is done (part 1)Matthieu Baerts (NGI0)
Since the "Fixes" commit mentioned below, "userspace pm" subtests of mptcp_join selftests introduced in v6.5 are launching the whole transfer in the background, do the required checks, then wait for the end of transfer. There is no need to wait longer, especially because the checks at the end of the transfer are ignored (which is fine). This saves quite a few seconds in slow environments. Note that old versions will need commit bdbef0a6ff10 ("selftests: mptcp: add mptcp_lib_kill_wait") as well to get 'mptcp_lib_kill_wait()' helper. Fixes: 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer") Cc: stable@vger.kernel.org # 6.5.x: bdbef0a6ff10: selftests: mptcp: add mptcp_lib_kill_wait Cc: stable@vger.kernel.org # 6.5.x Reviewed-and-tested-by: Geliang Tang <geliang@kernel.org> Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://lore.kernel.org/r/20240131-upstream-net-20240131-mptcp-ci-issues-v1-8-4c1c11e571ff@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-02selftests: mptcp: join: check CURRESTAB countersGeliang Tang
This patch adds a new helper chk_cestab_nr() to check the current established connections counter MIB_CURRESTAB. Set the newly added variables cestab_ns1 and cestab_ns2 to indicate how many connections are expected in ns1 or ns2. Invoke check_cestab() to check the counter during the connection in do_transfer() and invoke chk_cestab_nr() to re-check it when the connection closed. These checks are embedded in add_tests(). Signed-off-by: Geliang Tang <geliang.tang@linux.dev> Acked-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-12-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni
Cross-merge networking fixes after downstream PR. Adjacent changes: drivers/net/ethernet/broadcom/bnxt/bnxt_xdp.c 23c93c3b6275 ("bnxt_en: do not map packet buffers twice") 6d1add95536b ("bnxt_en: Modify TX ring indexing logic.") tools/testing/selftests/net/Makefile 2258b666482d ("selftests: add vlan hw filter tests") a0bc96c0cd6e ("selftests: net: verify fq per-band packet limit") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-12-17selftests: mptcp: join: fix subflow_send_ack lookupGeliang Tang
MPC backups tests will skip unexpected sometimes (For example, when compiling kernel with an older version of gcc, such as gcc-8), since static functions like mptcp_subflow_send_ack also be listed in /proc/kallsyms, with a 't' in front of it, not 'T' ('T' is for a global function): > grep "mptcp_subflow_send_ack" /proc/kallsyms 0000000000000000 T __pfx___mptcp_subflow_send_ack 0000000000000000 T __mptcp_subflow_send_ack 0000000000000000 t __pfx_mptcp_subflow_send_ack 0000000000000000 t mptcp_subflow_send_ack In this case, mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$" will be false, MPC backups tests will skip. This is not what we expected. The correct logic here should be: if mptcp_subflow_send_ack is not a global function in /proc/kallsyms, do these MPC backups tests. So a 'T' must be added in front of mptcp_subflow_send_ack. Fixes: 632978f0a961 ("selftests: mptcp: join: skip MPC backups tests if not supported") Cc: stable@vger.kernel.org Signed-off-by: Geliang Tang <geliang.tang@linux.dev> Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-29selftests: mptcp: add mptcp_lib_wait_local_port_listenGeliang Tang
To avoid duplicated code in different MPTCP selftests, we can add and use helpers defined in mptcp_lib.sh. wait_local_port_listen() helper is defined in diag.sh, mptcp_connect.sh, mptcp_join.sh and simult_flows.sh, export it into mptcp_lib.sh and rename it with mptcp_lib_ prefix. Use this new helper in all these scripts. Note: We only have IPv4 connections in this helper, not looking at IPv6 (tcp6) but that's OK because we only have IPv4 connections here in diag.sh. Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-15-8d6b94150f6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-29selftests: mptcp: add mptcp_lib_check_transferGeliang Tang
To avoid duplicated code in different MPTCP selftests, we can add and use helpers defined in mptcp_lib.sh. check_transfer() and print_file_err() helpers are defined both in mptcp_connect.sh and mptcp_sockopt.sh, export them into mptcp_lib.sh and rename them with mptcp_lib_ prefix. And use them in all scripts. Note: In mptcp_sockopt.sh it is OK to drop 'ret=1' in check_transfer() because it will be set in run_tests() anyway. Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-14-8d6b94150f6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-29selftests: mptcp: add mptcp_lib_make_fileGeliang Tang
To avoid duplicated code in different MPTCP selftests, we can add and use helpers defined in mptcp_lib.sh. make_file() helper in mptcp_sockopt.sh and userspace_pm.sh are the same. Export it into mptcp_lib.sh and rename it as mptcp_lib_kill_wait(). Use it in both mptcp_connect.sh and mptcp_join.sh. Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-13-8d6b94150f6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-29selftests: mptcp: add mptcp_lib_get_counterGeliang Tang
To avoid duplicated code in different MPTCP selftests, we can add and use helpers defined in mptcp_lib.sh. The helper get_counter() in mptcp_join.sh and get_mib_counter() in mptcp_connect.sh have the same functionality, export get_counter() into mptcp_lib.sh and rename it as mptcp_lib_get_counter(). Use this new helper instead of get_counter() and get_mib_counter(). Use this helper in test_prio() in userspace_pm.sh too instead of open-coding. Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-11-8d6b94150f6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-29selftests: mptcp: add mptcp_lib_is_v6Geliang Tang
To avoid duplicated code in different MPTCP selftests, we can add and use helpers defined in mptcp_lib.sh. is_v6() helper is defined in mptcp_connect.sh, mptcp_join.sh and mptcp_sockopt.sh, so export it into mptcp_lib.sh and rename it as mptcp_lib_is_v6(). Use this new helper in all scripts. Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-10-8d6b94150f6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-29selftests: mptcp: add mptcp_lib_kill_waitGeliang Tang
To avoid duplicated code in different MPTCP selftests, we can add and use helpers defined in mptcp_lib.sh. Export kill_wait() helper in userspace_pm.sh into mptcp_lib.sh and rename it as mptcp_lib_kill_wait(). It can be used to instead of kill_wait() in mptcp_join.sh. Use the new helper in both scripts. Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-9-8d6b94150f6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-29selftests: mptcp: userspace pm send RM_ADDR for ID 0Geliang Tang
This patch adds a selftest for userspace PM to remove id 0 address. Use userspace_pm_add_addr() helper to add an id 10 address, then use userspace_pm_rm_addr() helper to remove id 0 address. Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-8-8d6b94150f6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-29selftests: mptcp: userspace pm remove initial subflowGeliang Tang
This patch adds a selftest for userspace PM to remove the initial subflow. Use userspace_pm_add_sf() to add a subflow, and pass initial IP address to userspace_pm_rm_sf() to remove the initial subflow. Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-7-8d6b94150f6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-29selftests: mptcp: userspace pm create id 0 subflowGeliang Tang
This patch adds a selftest to create id 0 subflow. Pass id 0 to the helper userspace_pm_add_sf() to create id 0 subflow. chk_mptcp_info shows one subflow but chk_subflows_total shows two subflows in each namespace. Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-5-8d6b94150f6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-29selftests: mptcp: update userspace pm test helpersGeliang Tang
This patch adds a new argument namespace to userspace_pm_add_addr() and userspace_pm_add_sf() to make these two helper more versatile. Add two more versatile helpers for userspace pm remove subflow or address: userspace_pm_rm_addr() and userspace_pm_rm_sf(). The original test helpers userspace_pm_rm_sf_addr_ns1() and userspace_pm_rm_sf_addr_ns2() can be replaced by these new helpers. Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-4-8d6b94150f6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-29selftests: mptcp: add chk_subflows_total helperGeliang Tang
This patch adds a new helper chk_subflows_total(), in it use the newly added counter mptcpi_subflows_total to get the "correct" amount of subflows, including the initial one. To be compatible with old 'ss' or kernel versions not supporting this counter, get the total subflows by listing TCP connections that are MPTCP subflows: ss -ti state state established state syn-sent state syn-recv | grep -c tcp-ulp-mptcp. Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-3-8d6b94150f6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-29selftests: mptcp: add evts_get_info helperGeliang Tang
This patch adds a new helper get_info_value(), using 'sed' command to parse the value of the given item name in the line with the given keyword, to make chk_mptcp_info() and pedit_action_pkts() more readable. Also add another helper evts_get_info() to use get_info_value() to parse the output of 'pm_nl_ctl events' command, to make all the userspace pm selftests more readable, both in mptcp_join.sh and userspace_pm.sh. Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231128-send-net-next-2023107-v4-2-8d6b94150f6b@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-11-14selftests: mptcp: fix fastclose with csum failurePaolo Abeni
Running the mp_join selftest manually with the following command line: ./mptcp_join.sh -z -C leads to some failures: 002 fastclose server test # ... rtx [fail] got 1 MP_RST[s] TX expected 0 # ... rstrx [fail] got 1 MP_RST[s] RX expected 0 The problem is really in the wrong expectations for the RST checks implied by the csum validation. Note that the same check is repeated explicitly in the same test-case, with the correct expectation and pass successfully. Address the issue explicitly setting the correct expectation for the failing checks. Reported-by: Xiumei Mu <xmu@redhat.com> Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases") Cc: stable@vger.kernel.org Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Link: https://lore.kernel.org/r/20231114-upstream-net-20231113-mptcp-misc-fixes-6-7-rc2-v1-5-7b9cd6a7b7f4@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-27selftests: mptcp: display simult in extra_msgGeliang Tang
Just like displaying "invert" after "Info: ", "simult" should be displayed too when rm_subflow_nr doesn't match the expect value in chk_rm_nr(): syn [ ok ] synack [ ok ] ack [ ok ] add [ ok ] echo [ ok ] rm [ ok ] rmsf [ ok ] 3 in [2:4] Info: invert simult syn [ ok ] synack [ ok ] ack [ ok ] add [ ok ] echo [ ok ] rm [ ok ] rmsf [ ok ] Info: invert Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-10-db8f25f798eb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-27selftests: mptcp: fix wait_rm_addr/sf parametersGeliang Tang
The second input parameter of 'wait_rm_addr/sf $1 1' is misused. If it's 1, wait_rm_addr/sf will never break, and will loop ten times, then 'wait_rm_addr/sf' equals to 'sleep 1'. This delay time is too long, which can sometimes make the tests fail. A better way to use wait_rm_addr/sf is to use rm_addr/sf_count to obtain the current value, and then pass into wait_rm_addr/sf. Fixes: 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer") Cc: stable@vger.kernel.org Suggested-by: Matthieu Baerts <matttbe@kernel.org> Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-2-db8f25f798eb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-27selftests: mptcp: run userspace pm tests slowerGeliang Tang
Some userspace pm tests failed are reported by CI: 112 userspace pm add & remove address syn [ ok ] synack [ ok ] ack [ ok ] add [ ok ] echo [ ok ] mptcp_info subflows=1:1 [ ok ] subflows_total 2:2 [ ok ] mptcp_info add_addr_signal=1:1 [ ok ] rm [ ok ] rmsf [ ok ] Info: invert mptcp_info subflows=0:0 [ ok ] subflows_total 1:1 [fail] got subflows 0:0 expected 1:1 Server ns stats TcpPassiveOpens 2 0.0 TcpInSegs 118 0.0 This patch fixes them by changing 'speed' to 5 to run the tests much more slowly. Fixes: 4369c198e599 ("selftests: mptcp: test userspace pm out of transfer") Cc: stable@vger.kernel.org Reviewed-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231025-send-net-next-20231025-v1-1-db8f25f798eb@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-19selftests: mptcp: join: no RST when rm subflow/addrMatthieu Baerts
Recently, we noticed that some RST were wrongly generated when removing the initial subflow. This patch makes sure RST are not sent when removing any subflows or any addresses. Fixes: c2b2ae3925b6 ("mptcp: handle correctly disconnect() failures") Cc: stable@vger.kernel.org Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-5-17ecb002e41d@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-19selftests: mptcp: join: correctly check for no RSTMatthieu Baerts
The commit mentioned below was more tolerant with the number of RST seen during a test because in some uncontrollable situations, multiple RST can be generated. But it was not taking into account the case where no RST are expected: this validation was then no longer reporting issues for the 0 RST case because it is not possible to have less than 0 RST in the counter. This patch fixes the issue by adding a specific condition. Fixes: 6bf41020b72b ("selftests: mptcp: update and extend fastclose test-cases") Cc: stable@vger.kernel.org Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matttbe@kernel.org> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20231018-send-net-20231018-v1-1-17ecb002e41d@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/intel/igc/igc_main.c 06b412589eef ("igc: Add lock to safeguard global Qbv variables") d3750076d464 ("igc: Add TransmissionOverrun counter") drivers/net/ethernet/microsoft/mana/mana_en.c a7dfeda6fdec ("net: mana: Fix MANA VF unload when hardware is unresponsive") a9ca9f9ceff3 ("page_pool: split types and declarations from page_pool.h") 92272ec4107e ("eth: add missing xdp.h includes in drivers") net/mptcp/protocol.h 511b90e39250 ("mptcp: fix disconnect vs accept race") b8dc6d6ce931 ("mptcp: fix rcv buffer auto-tuning") tools/testing/selftests/net/mptcp/mptcp_join.sh c8c101ae390a ("selftests: mptcp: join: fix 'implicit EP' test") 03668c65d153 ("selftests: mptcp: join: rework detailed report") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-04selftests: mptcp: join: fix 'implicit EP' testAndrea Claudi
mptcp_join 'implicit EP' test currently fails when using ip mptcp: $ ./mptcp_join.sh -iI <snip> 001 implicit EP creation[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 ' Error: too many addresses or duplicate one: -22. ID change is prevented[fail] expected '10.0.2.2 10.0.2.2 id 1 implicit' found '10.0.2.2 id 1 rawflags 10 ' modif is allowed[fail] expected '10.0.2.2 10.0.2.2 id 1 signal' found '10.0.2.2 id 1 signal ' This happens because of two reasons: - iproute v6.3.0 does not support the implicit flag, fixed with iproute2-next commit 3a2535a41854 ("mptcp: add support for implicit flag") - pm_nl_check_endpoint wrongly expects the ip address to be repeated two times in iproute output, and does not account for a final whitespace in it. This fixes the issue trimming the whitespace in the output string and removing the double address in the expected string. Fixes: 69c6ce7b6eca ("selftests: mptcp: add implicit endpoint test case") Cc: stable@vger.kernel.org Signed-off-by: Andrea Claudi <aclaudi@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-2-6671b1ab11cc@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-04selftests: mptcp: join: fix 'delete and re-add' testAndrea Claudi
mptcp_join 'delete and re-add' test fails when using ip mptcp: $ ./mptcp_join.sh -iI <snip> 002 delete and re-add before delete[ ok ] mptcp_info subflows=1 [ ok ] Error: argument "ADDRESS" is wrong: invalid for non-zero id address after delete[fail] got 2:2 subflows expected 1 This happens because endpoint delete includes an ip address while id is not 0, contrary to what is indicated in the ip mptcp man page: "When used with the delete id operation, an IFADDR is only included when the ID is 0." This fixes the issue using the $addr variable in pm_nl_del_endpoint() only when id is 0. Fixes: 34aa6e3bccd8 ("selftests: mptcp: add ip mptcp wrappers") Cc: stable@vger.kernel.org Signed-off-by: Andrea Claudi <aclaudi@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230803-upstream-net-20230803-misc-fixes-6-5-v1-1-6671b1ab11cc@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-31selftests: mptcp: pm_nl_ctl: always look for errorsMatthieu Baerts
If a Netlink command for the MPTCP path-managers is not valid, it is important to check if there are errors. If yes, they need to be reported instead of being ignored and exiting without errors. Now if no replies are expected, an ACK from the kernelspace is asked by the userspace in order to always expect a reply. We can use the same buffer that is currently always >1024 bytes. Then we can check if there is an error (err->error), print it if any and report the error. After this modification, it is required to mute expected errors in mptcp_join.sh and pm_netlink.sh selftests: - when trying to add a bad endpoint, e.g. duplicated - when trying to set the two limits above the hard limit Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230730-upstream-net-next-20230728-mptcp-selftests-misc-v1-3-7e9cc530a9cd@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-31selftests: mptcp: join: colored resultsMatthieu Baerts
Thanks to the parent commit, it is easy to change the output and add some colours to help spotting issues. The colours are not used if stdout is redirected or if NO_COLOR env var is set to 1 as specified in https://no-color.org. It is possible to force displaying the colours even if stdout is redirected by setting this env var: SELFTESTS_MPTCP_LIB_COLOR_FORCE=1 Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230730-upstream-net-next-20230728-mptcp-selftests-misc-v1-2-7e9cc530a9cd@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-31selftests: mptcp: join: rework detailed reportMatthieu Baerts
This patch modifies how the detailed results are printed, mainly to improve what is displayed in case of issue: - Now the test name (title) is printed earlier, when starting the test if it is not intentionally skipped: by doing that, errors linked to a test will be printed after having written the test name and then avoid confusions. - Due to the previous item, it is required to add a new line after having printed the test name because in case of error with a command, it is better not to have the output in the middle of the screen. - Each check is printed on a dedicated line with aligned status (ok, skip, fail): it is easier to spot which one has failed, simpler to manage in the code not having to deal with alignment case by case and helpers can be used to uniform what is done. These helpers can also be useful later to do more actions depending on the results or change in one place what is printed. - Info messages have been reduced and aligned as well. And info messages about the creation of the default test files of 1 KB are no longer printed. Example: 001 no JOIN syn [ ok ] synack [ ok ] ack [ ok ] Or with a skip and a failure: 001 no JOIN syn [ ok ] synack [fail] got 42 JOIN[s] synack expected 0 Server ns stats (...) Client ns stats (...) ack [skip] Or with info: 104 Infinite map Test file (size 128 KB) for client Test file (size 128 KB) for server file received by server has inverted byte at 169 5 corrupted pkts syn [ ok ] synack [ ok ] While at it, verify_listener_events() now also print more info in case of failure and in pm_nl_check_endpoint(), the test is marked as failed instead of skipped if no ID has been given (internal selftest issue). Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230730-upstream-net-next-20230728-mptcp-selftests-misc-v1-1-7e9cc530a9cd@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26selftests: mptcp: join: only check for ip6tables if neededMatthieu Baerts
If 'iptables-legacy' is available, 'ip6tables-legacy' command will be used instead of 'ip6tables'. So no need to look if 'ip6tables' is available in this case. Cc: stable@vger.kernel.org Fixes: 0c4cd3f86a40 ("selftests: mptcp: join: use 'iptables-legacy' if available") Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230725-send-net-20230725-v1-1-6f60fe7137a9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-19selftests: mptcp: join: format subtests results in TAPMatthieu Baerts
The current selftests infrastructure formats the results in TAP 13. This version doesn't support subtests and only the end result of each selftest is taken into account. It means that a single issue in a subtest of a selftest containing multiple subtests forces the whole selftest to be marked as failed. It also means that subtests results are not tracked by CIs executing selftests. MPTCP selftests run hundreds of various subtests. It is then important to track each of them and not one result per selftest. It is particularly interesting to do that when validating stable kernels with the last version of the test suite: tests might fail because a feature is not supported but the test didn't skip that part. In this case, if subtests are not tracked, the whole selftest will be marked as failed making the other subtests useless because their results are ignored. This patch formats subtests results in TAP in mptcp_join.sh selftest. In this selftest and before starting each subtest, the 'reset' function is called. We can then check if the previous test has passed, failed or has been skipped from there. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-13selftests: mptcp: add speed env varGeliang Tang
Use a new env var speed instead of using 'speed' argument of run_tests() and do_transfer(). It can be set with 'fast', 'slow', or the actual speed number: run_tests $ns1 $ns2 10.0.1.1 slow -> speed=slow \ run_tests $ns1 $ns2 10.0.1.1. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230712-upstream-net-next-20230712-selftests-mptcp-use-local-env-v1-4-f1c8b62fbf95@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13selftests: mptcp: add fullmesh env varGeliang Tang
Use a new env var fullmesh instead of passing 'fullmesh_*' to addr_nr_ns2. It can be set with the actual value of addr_nr_ns2 now: addr_nr_ns2=fullmesh_1 \ run_tests $ns1 $ns2 10.0.1.1 -> fullmesh=1 \ run_tests $ns1 $ns2 10.0.1.1. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230712-upstream-net-next-20230712-selftests-mptcp-use-local-env-v1-3-f1c8b62fbf95@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13selftests: mptcp: add fastclose env varGeliang Tang
Use a new env var fastclose instead of passing fastclose to addr_nr_ns2. It can be set with 'server' or 'client': addr_nr_ns2=fastclose_client \ run_tests $ns1 $ns2 10.0.1.1 -> fastclose=client \ run_tests $ns1 $ns2 10.0.1.1. With this change, the fullmesh flag setting code can be moved into pm_nl_set_endpoint() from do_transfer(). Signed-off-by: Geliang Tang <geliang.tang@suse.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230712-upstream-net-next-20230712-selftests-mptcp-use-local-env-v1-2-f1c8b62fbf95@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-13selftests: mptcp: set all env vars as local onesGeliang Tang
It would be better to move the declaration of all the env variables to do_transfer(), run_tests(), or pm_nl_set_endpoint() as local variables, instead of exporting them globally at the beginning of the file. Signed-off-by: Geliang Tang <geliang.tang@suse.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230712-upstream-net-next-20230712-selftests-mptcp-use-local-env-v1-1-f1c8b62fbf95@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24selftests: mptcp: add pm_nl_set_endpoint helperGeliang Tang
This patch moves endpoint settings out of do_transfer() into a new helper pm_nl_set_endpoint(). And invoke this helper in do_transfer(). This makes the code much more clearer. Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-7-a883213c8ba9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24selftests: mptcp: drop sflags parameterGeliang Tang
run_tests() accepts too many optional parameters. Before this modification, it was required to set all of then when only the last one had to be changed. That's not clear to see all these 0 and it makes the maintenance harder: run_tests $ns1 $ns2 10.0.1.1 1 2 3 slow Instead, the parameter can be set as an env var with a limited scope: foo=1 bar=2 next=3 \ run_tests $ns1 $ns2 10.0.1.1 slow This patch switches to key/value "sflags=*" instead of positional parameter sflags of do_transfer() and run_tests(). Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-6-a883213c8ba9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24selftests: mptcp: drop addr_nr_ns1/2 parametersGeliang Tang
run_tests() accepts too many optional parameters. Before this modification, it was required to set all of then when only the last one had to be changed. That's not clear to see all these 0 and it makes the maintenance harder: run_tests $ns1 $ns2 10.0.1.1 1 2 3 slow Instead, the parameter can be set as an env var with a limited scope: foo=1 bar=2 next=3 \ run_tests $ns1 $ns2 10.0.1.1 slow This patch switches to key/value "addr_nr_ns1=*, addr_nr_ns2=*" instead of positional parameters addr_nr_ns1 and addr_nr_ns2 of do_transfer() and run_tests(). Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-5-a883213c8ba9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24selftests: mptcp: drop test_linkfail parameterGeliang Tang
run_tests() accepts too many optional parameters. Before this modification, it was required to set all of then when only the last one had to be changed. That's not clear to see all these 0 and it makes the maintenance harder: run_tests $ns1 $ns2 10.0.1.1 1 2 3 slow Instead, the parameter can be set as an env var with a limited scope: foo=1 bar=2 next=3 \ run_tests $ns1 $ns2 10.0.1.1 slow This patch switches to key/value "test_linkfail=*" instead of positional parameter test_linkfail of do_transfer() and run_tests(). Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-4-a883213c8ba9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24selftests: mptcp: set FAILING_LINKS in run_testsGeliang Tang
Set FAILING_LINKS as an env var with a limited scope only when calling run_tests(). Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-3-a883213c8ba9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24selftests: mptcp: check subflow and addr infosGeliang Tang
New MPTCP info are being checked in multiple places to improve the code coverage when using the userspace PM. This patch makes chk_mptcp_info() more generic to be able to check subflows, add_addr_signal and add_addr_accepted info (and even more later). New arguments are now required to get different infos from the two namespaces because some counters are specific to the client or the server. Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-2-a883213c8ba9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-24selftests: mptcp: test userspace pm out of transferGeliang Tang
This patch moves userspace pm tests out of do_transfer(). Move add address test into a new function userspace_pm_add_addr(), and remove address test into userspace_pm_rm_sf_addr_ns1(). Move add subflow test into userspace_pm_add_sf() and remove subflow into userspace_pm_rm_sf_addr_ns2(). Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Geliang Tang <geliang.tang@suse.com> Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230623-send-net-next-20230623-v1-1-a883213c8ba9@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-21selftests: mptcp: join: skip check if MIB counter not supported (part 2)Matthieu Baerts
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the MPTCP MIB counters introduced in commit fc518953bc9c ("mptcp: add and use MIB counter infrastructure") and more later. The MPTCP Join selftest heavily relies on these counters. If a counter is not supported by the kernel, it is not displayed when using 'nstat -z'. We can then detect that and skip the verification. A new helper (get_counter()) has been added recently in the -net tree to do the required checks and return an error if the counter is not available. This commit is similar to the one with the same title applied in the -net tree but it modifies code only present in net-next for the moment, see the Fixes commit below. While at it, we can also remove the use of ${extra_msg} variable which is never assigned in chk_rm_tx_nr() function and use 'echo' without '-n' parameter. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 0639fa230a21 ("selftests: mptcp: add explicit check for new mibs") Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR. Conflicts: include/linux/mlx5/driver.h 617f5db1a626 ("RDMA/mlx5: Fix affinity assignment") dc13180824b7 ("net/mlx5: Enable devlink port for embedded cpu VF vports") https://lore.kernel.org/all/20230613125939.595e50b8@canb.auug.org.au/ tools/testing/selftests/net/mptcp/mptcp_join.sh 47867f0a7e83 ("selftests: mptcp: join: skip check if MIB counter not supported") 425ba803124b ("selftests: mptcp: join: support RM_ADDR for used endpoints or not") 45b1a1227a7a ("mptcp: introduces more address related mibs") 0639fa230a21 ("selftests: mptcp: add explicit check for new mibs") https://lore.kernel.org/netdev/20230609-upstream-net-20230610-mptcp-selftests-support-old-kernels-part-3-v1-0-2896fe2ee8a3@tessares.net/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12selftests: mptcp: join: skip mixed tests if not supportedMatthieu Baerts
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of a mix of subflows in v4 and v6 by the in-kernel PM introduced by commit b9d69db87fb7 ("mptcp: let the in-kernel PM use mixed IPv4 and IPv6 addresses"). It looks like there is no external sign we can use to predict the expected behaviour. Instead of accepting different behaviours and thus not really checking for the expected behaviour, we are looking here for a specific kernel version. That's not ideal but it looks better than removing the test because it cannot support older kernel versions. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: ad3493746ebe ("selftests: mptcp: add test-cases for mixed v4/v6 subflows") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12selftests: mptcp: join: uniform listener testsMatthieu Baerts
The alignment was different from the other tests because tabs were used instead of spaces. While at it, also use 'echo' instead of 'printf' to print the result to keep the same style as done in the other sub-tests. And, even if it should be better with, also remove 'stdbuf' and sed's '--unbuffered' option because they are not used in the other subtests and they are not available when using a minimal environment with busybox. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 178d023208eb ("selftests: mptcp: listener test for in-kernel PM") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-12selftests: mptcp: join: skip PM listener tests if not supportedMatthieu Baerts
Selftests are supposed to run on any kernels, including the old ones not supporting all MPTCP features. One of them is the support of PM listener events introduced by commit f8c9dfbd875b ("mptcp: add pm listener events"). It is possible to look for "mptcp_event_pm_listener" in kallsyms to know in advance if the kernel supports this feature. Link: https://github.com/multipath-tcp/mptcp_net-next/issues/368 Fixes: 178d023208eb ("selftests: mptcp: listener test for in-kernel PM") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit (git 2.34.1) at 2024-06-02 07:49:35 +0000