summaryrefslogtreecommitdiff
path: root/tools/testing/selftests/net/pmtu.sh
AgeCommit message (Collapse)Author
2024-01-31selftests: net: don't access /dev/stdout in pmtu.shPaolo Abeni
When running the pmtu.sh via the kselftest infra, accessing /dev/stdout gives unexpected results: # dd: failed to open '/dev/stdout': Device or resource busy # TEST: IPv4, bridged vxlan4: PMTU exceptions [FAIL] Let dd use directly the standard output to fix the above: # TEST: IPv4, bridged vxlan4: PMTU exceptions - nexthop objects [ OK ] Fixes: 136a1b434bbb ("selftests: net: test vxlan pmtu exceptions with tcp") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/23d7592c5d77d75cff9b34f15c227f92e911c2ae.1706635101.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-31selftests: net: fix available tunnels detectionPaolo Abeni
The pmtu.sh test tries to detect the tunnel protocols available in the running kernel and properly skip the unsupported cases. In a few more complex setup, such detection is unsuccessful, as the script currently ignores some intermediate error code at setup time. Before: # which: no nettest in (/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin) # TEST: vti6: PMTU exceptions (ESP-in-UDP) [FAIL] # PMTU exception wasn't created after creating tunnel exceeding link layer MTU # ./pmtu.sh: line 931: kill: (7543) - No such process # ./pmtu.sh: line 931: kill: (7544) - No such process After: # xfrm4 not supported # TEST: vti4: PMTU exceptions [SKIP] Fixes: ece1278a9b81 ("selftests: net: add ESP-in-UDP PMTU test") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/cab10e75fda618e6fff8c595b632f47db58b9309.1706635101.git.pabeni@redhat.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-01-03selftests/net: change shebang to bash to support "source"Yujie Liu
The patch set [1] added a general lib.sh in net selftests, and converted several test scripts to source the lib.sh. unicast_extensions.sh (converted in [1]) and pmtu.sh (converted in [2]) have a /bin/sh shebang which may point to various shells in different distributions, but "source" is only available in some of them. For example, "source" is a built-it function in bash, but it cannot be used in dash. Refer to other scripts that were converted together, simply change the shebang to bash to fix the following issues when the default /bin/sh points to other shells. not ok 51 selftests: net: unicast_extensions.sh # exit=1 v1 -> v2: - Fix pmtu.sh which has the same issue as unicast_extensions.sh, suggested by Hangbin - Change the style of the "source" line to be consistent with other tests, suggested by Hangbin Link: https://lore.kernel.org/all/20231202020110.362433-1-liuhangbin@gmail.com/ [1] Link: https://lore.kernel.org/all/20231219094856.1740079-1-liuhangbin@gmail.com/ [2] Reported-by: kernel test robot <oliver.sang@intel.com> Fixes: 378f082eaf37 ("selftests/net: convert pmtu.sh to run it in unique namespace") Fixes: 0f4765d0b48d ("selftests/net: convert unicast_extensions.sh to run it in unique namespace") Signed-off-by: Yujie Liu <yujie.liu@intel.com> Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com> Link: https://lore.kernel.org/r/20231229131931.3961150-1-yujie.liu@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-12-23selftests/net: convert pmtu.sh to run it in unique namespaceHangbin Liu
pmtu test use /bin/sh, so we need to source ./lib.sh instead of lib.sh Here is the test result after conversion. # ./pmtu.sh TEST: ipv4: PMTU exceptions [ OK ] TEST: ipv4: PMTU exceptions - nexthop objects [ OK ] TEST: ipv6: PMTU exceptions [ OK ] TEST: ipv6: PMTU exceptions - nexthop objects [ OK ] ... TEST: ipv4: list and flush cached exceptions - nexthop objects [ OK ] TEST: ipv6: list and flush cached exceptions [ OK ] TEST: ipv6: list and flush cached exceptions - nexthop objects [ OK ] TEST: ipv4: PMTU exception w/route replace [ OK ] TEST: ipv4: PMTU exception w/route replace - nexthop objects [ OK ] TEST: ipv6: PMTU exception w/route replace [ OK ] TEST: ipv6: PMTU exception w/route replace - nexthop objects [ OK ] Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-11-03selftests: pmtu.sh: fix result checkingHangbin Liu
In the PMTU test, when all previous tests are skipped and the new test passes, the exit code is set to 0. However, the current check mistakenly treats this as an assignment, causing the check to pass every time. Consequently, regardless of how many tests have failed, if the latest test passes, the PMTU test will report a pass. Fixes: 2a9d3716b810 ("selftests: pmtu.sh: improve the test result processing") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-04selftests: net: test vxlan pmtu exceptions with tcpFlorian Westphal
TCP might get stuck if a nonlinear skb exceeds the path MTU, icmp error contains an incorrect icmp checksum in that case. Extend the existing test for vxlan to also send at least 1MB worth of data via TCP in addition to the existing 'large icmp packet adds route exception'. On my test VM this fails due to 0-size output file without "tunnels: fix kasan splat when generating ipv4 pmtu error". Signed-off-by: Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20230803152653.29535-3-fw@strlen.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-11-21selftests/net: Find nettest in current directoryDaniel Díaz
The `nettest` binary, built from `selftests/net/nettest.c`, was expected to be found in the path during test execution of `fcnal-test.sh` and `pmtu.sh`, leading to tests getting skipped when the binary is not installed in the system, as can be seen in these logs found in the wild [1]: # TEST: vti4: PMTU exceptions [SKIP] [ 350.600250] IPv6: ADDRCONF(NETDEV_CHANGE): veth_b: link becomes ready [ 350.607421] IPv6: ADDRCONF(NETDEV_CHANGE): veth_a: link becomes ready # 'nettest' command not found; skipping tests # xfrm6udp not supported # TEST: vti6: PMTU exceptions (ESP-in-UDP) [SKIP] [ 351.605102] IPv6: ADDRCONF(NETDEV_CHANGE): veth_b: link becomes ready [ 351.612243] IPv6: ADDRCONF(NETDEV_CHANGE): veth_a: link becomes ready # 'nettest' command not found; skipping tests # xfrm4udp not supported The `unicast_extensions.sh` tests also rely on `nettest`, but it runs fine there because it looks for the binary in the current working directory [2]: The same mechanism that works for the Unicast extensions tests is here copied over to the PMTU and functional tests. [1] https://lkft.validation.linaro.org/scheduler/job/5839508#L6221 [2] https://lkft.validation.linaro.org/scheduler/job/5839508#L7958 Signed-off-by: Daniel Díaz <daniel.diaz@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-18selftest: net: Test IPv4 PMTU exceptions with DSCP and ECNGuillaume Nault
Add two tests to pmtu.sh, for verifying that PMTU exceptions get properly created for routes that don't belong to the main table. A fib-rule based on the packet's DSCP field is used to jump to the correct table. ECN shouldn't interfere with this process, so each test has two components: one that only sets DSCP and one that sets both DSCP and ECN. One of the test triggers PMTU exceptions using ICMP Echo Requests, the other using UDP packets (to test different handlers in the kernel). A few adjustments are necessary in the rest of the script to allow policy routing scenarios: * Add global variable rt_table that allows setup_routing_*() to add routes to a specific routing table. By default rt_table is set to "main", so existing tests don't need to be modified. * Another global variable, policy_mark, is used to define which dsfield value is used for policy routing. This variable has no effect on tests that don't use policy routing. * The UDP version of the test uses socat. So cleanup() now also need to kill socat PIDs. * route_get_dst_pmtu_from_exception() and route_get_dst_exception() now take an optional third argument specifying the dsfield. If not specified, 0 is used, so existing users don't need to be modified. Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-09selftests: pmtu.sh: Kill nettest processes launched in subshell.Guillaume Nault
When using "run_cmd <command> &", then "$!" refers to the PID of the subshell used to run <command>, not the command itself. Therefore nettest_pids actually doesn't contain the list of the nettest commands running in the background. So cleanup() can't kill them and the nettest processes run until completion (fortunately they have a 5s timeout). Fix this by defining a new command for running processes in the background, for which "$!" really refers to the PID of the command run. Also, double quote variables on the modified lines, to avoid shellcheck warnings. Fixes: ece1278a9b81 ("selftests: net: add ESP-in-UDP PMTU test") Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-09selftests: pmtu.sh: Kill tcpdump processes launched by subshell.Guillaume Nault
The cleanup() function takes care of killing processes launched by the test functions. It relies on variables like ${tcpdump_pids} to get the relevant PIDs. But tests are run in their own subshell, so updated *_pids values are invisible to other shells. Therefore cleanup() never sees any process to kill: $ ./tools/testing/selftests/net/pmtu.sh -t pmtu_ipv4_exception TEST: ipv4: PMTU exceptions [ OK ] TEST: ipv4: PMTU exceptions - nexthop objects [ OK ] $ pgrep -af tcpdump 6084 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap 6085 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap 6086 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap 6087 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap 6088 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap 6089 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap 6090 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap 6091 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap 6228 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap 6229 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap 6230 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap 6231 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap 6232 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap 6233 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap 6234 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap 6235 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap Fix this by running cleanup() in the context of the test subshell. Now that each test cleans the environment after completion, there's no need for calling cleanup() again when the next test starts. So let's drop it from the setup() function. This is okay because cleanup() is also called when pmtu.sh starts, so even the first test starts in a clean environment. Also, use tcpdump's immediate mode. Otherwise it might not have time to process buffered packets, resulting in missing packets or even empty pcap files for short tests. Note: PAUSE_ON_FAIL is still evaluated before cleanup(), so one can still inspect the test environment upon failure when using -p. Fixes: a92a0a7b8e7c ("selftests: pmtu: Simplify cleanup and namespace names") Signed-off-by: Guillaume Nault <gnault@redhat.com> Reviewed-by: Shuah Khan <skhan@linuxfoundation.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-21selftests: net: add ESP-in-UDP PMTU testVadim Fedorenko
The case of ESP in UDP encapsulation was not covered before. Add cases of local changes of MTU and difference on routed path. Signed-off-by: Vadim Fedorenko <vfedorenko@novek.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-07tools: selftests: add test for changing routes with PTMU exceptionsSean Tranchetti
Adds new 2 new tests to the PTMU script: pmtu_ipv4/6_route_change. These tests explicitly test for a recently discovered problem in the IPv6 routing framework where PMTU exceptions were not properly released when replacing a route via "ip route change ...". After creating PMTU exceptions, the route from the device A to R1 will be replaced with a new route, then device A will be deleted. If the PMTU exceptions were properly cleaned up by the kernel, this device deletion will succeed. Otherwise, the unregistration of the device will stall, and messages such as the following will be logged in dmesg: unregister_netdevice: waiting for veth_A-R1 to become free. Usage count = 4 Signed-off-by: Sean Tranchetti <stranche@codeaurora.org> Reviewed-by: David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/1609892546-11389-2-git-send-email-stranche@quicinc.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12selftests: pmtu.sh: improve the test result processingPo-Hsu Lin
This test will treat all non-zero return codes as failures, it will make the pmtu.sh test script being marked as FAILED when some sub-test got skipped. Improve the result processing by * Only mark the whole test script as SKIP when all of the sub-tests were skipped * If the sub-tests were either passed or skipped, the overall result will be PASS * If any of them has failed with return code 1 or anything bad happened (e.g. return code 127 for command not found), the overall result will be FAIL Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-12selftests: pmtu.sh: use $ksft_skip for skipped return codePo-Hsu Lin
This test uses return code 2 as a hard-coded skipped state, let's use the kselftest framework skip code variable $ksft_skip instead to make it more readable and easier to maintain. Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-08-04selftests: pmtu.sh: Add tests for UDP tunnels handled by Open vSwitchStefano Brivio
The new tests check that IP and IPv6 packets exceeding the local PMTU estimate, forwarded by an Open vSwitch instance from another node, result in the correct route exceptions being created, and that communication with end-to-end fragmentation, over GENEVE and VXLAN Open vSwitch ports, is now possible as a result of PMTU discovery. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-04selftests: pmtu.sh: Add tests for bridged UDP tunnelsStefano Brivio
The new tests check that IP and IPv6 packets exceeding the local PMTU estimate, both locally generated and forwarded by a bridge from another node, result in the correct route exceptions being created, and that communication with end-to-end fragmentation over VXLAN and GENEVE tunnels is now possible as a result of PMTU discovery. Part of the existing setup functions aren't generic enough to simply add a namespace and a bridge to the existing routing setup. This rework is in progress and we can easily shrink this once more generic topology functions are available. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-04-20selftests: pmtu: implement IPIP, SIT and ip6tnl PMTU discovery testsLourdes Pedrajas
Add PMTU discovery tests for these encapsulations: - IPIP - SIT, mode ip6ip - ip6tnl, modes ip6ip6 and ipip6 Signed-off-by: Lourdes Pedrajas <lu@pplo.net> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20selftests: pmtu: fix init mtu value in descriptionHangbin Liu
There is no a_r3, a_r4 in the testing topology. It should be b_r1, b_r2. Also b_r1 mtu is 1400 and b_r2 mtu is 1500. Fixes: e44e428f59e4 ("selftests: pmtu: add basic IPv4 and IPv6 PMTU tests") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-29selftests: pmtu: use -oneline for ip route list cacheThadeu Lima de Souza Cascardo
Some versions of iproute2 will output more than one line per entry, which will cause the test to fail, like: TEST: ipv6: list and flush cached exceptions [FAIL] can't list cached exceptions That happens, for example, with iproute2 4.15.0. When using the -oneline option, this will work just fine: TEST: ipv6: list and flush cached exceptions [ OK ] This also works just fine with a more recent version of iproute2, like 5.4.0. For some reason, two lines are printed for the IPv4 test no matter what version of iproute2 is used. Use the same -oneline parameter there instead of counting the lines twice. Fixes: b964641e9925 ("selftests: pmtu: Make list_flush_ipv6_exception test more demanding") Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24selftests: pmtu: Make list_flush_ipv6_exception test more demandingStefano Brivio
Instead of just listing and flushing two cached exceptions, create a relatively big number of them, and count how many are listed. Single netlink dump messages contain approximately 25 entries each, and this way we can make sure the partial dump tracking mechanism is working properly. While at it, also ensure that no cached routes can be listed after flush, and remove 'sleep 1' calls, they are not actually needed. v7: No changes v6: - Merge this patch into series including fix, as it's also targeted for net-next. No actual changes Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-24selftests: pmtu: Introduce list_flush_ipv4_exception test caseStefano Brivio
This test checks that route exceptions can be successfully listed and flushed using ip -6 route {list,flush} cache. v7: No changes v6: - Merge this patch into series including fix, as it's also targeted for net-next - Drop left-over print of 'ip route list cache | wc -l' Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-11selftests: pmtu: Introduce list_flush_ipv6_exception test caseStefano Brivio
This test checks that route exceptions can be successfully listed and flushed using ip -6 route {list,flush} cache. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-10selftests: pmtu: Add support for routing via nexthop objectsDavid Ahern
Add routing setup using nexthop objects and repeat tests with old and new routing. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-10selftests: pmtu: Move route installs to a new functionDavid Ahern
Move the route add commands to a new function called setup_routing_old. The '_old' refers to the classic way of installing routes. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-06-10selftests: pmtu: Move running of test into a new functionDavid Ahern
Move the block of code that runs a test and prints the verdict to a new function, run_test. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
The phylink conflict was between a bug fix by Russell King to make sure we have a consistent PHY interface mode, and a change in net-next to pull some code in phylink_resolve() into the helper functions phylink_mac_link_{up,down}() On the dp83867 side it's mostly overlapping changes, with the 'net' side removing a condition that was supposed to trigger for RGMII but because of how it was coded never actually could trigger. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-28selftests: pmtu: Fix encapsulating device in pmtu_vti6_link_change_mtuStefano Brivio
In the pmtu_vti6_link_change_mtu test, both local and remote addresses for the vti6 tunnel are assigned to the same address given to the dummy interface that we use as encapsulating device with a known MTU. This works as long as the dummy interface is actually selected, via rt6_lookup(), as encapsulating device. But if the remote address of the tunnel is a local address too, the loopback interface could also be selected, and there's nothing wrong with it. This is what some older -stable kernels do (3.18.z, at least), and nothing prevents us from subtly changing FIB implementation to revert back to that behaviour in the future. Define an IPv6 prefix instead, and use two separate addresses as local and remote for vti6, so that the encapsulating device can't be a loopback interface. Reported-by: Xiumei Mu <xmu@redhat.com> Fixes: 1fad59ea1c34 ("selftests: pmtu: Add pmtu_vti6_link_change_mtu test") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-22selftests: pmtu: Simplify cleanup and namespace namesDavid Ahern
The point of the pause-on-fail argument is to leave the setup as is after a test fails to allow a user to debug why it failed. Move the cleanup after posting the result to the user to make it so. Random names for the namespaces are not user friendly when trying to debug a failure. Make them simpler and more direct for the tests. Run cleanup at the beginning to ensure they are cleaned up if they already exist. Remove cleanup_done. There is no harm in doing cleanup twice; just ignore any errors related to not existing - which is already done. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-05-16selftests: pmtu.sh: Remove quotes around commands in setup_xfrmDavid Ahern
The first command in setup_xfrm is failing resulting in the test getting skipped: + ip netns exec ns-B ip -6 xfrm state add src fd00:1::a dst fd00:1::b spi 0x1000 proto esp aead 'rfc4106(gcm(aes))' 0x0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f0f 128 mode tunnel + out=RTNETLINK answers: Function not implemented ... xfrm6 not supported TEST: vti6: PMTU exceptions [SKIP] xfrm4 not supported TEST: vti4: PMTU exceptions [SKIP] ... The setup command started failing when the run_cmd option was added. Removing the quotes fixes the problem: ... TEST: vti6: PMTU exceptions [ OK ] TEST: vti4: PMTU exceptions [ OK ] ... Fixes: 56490b623aa0 ("selftests: Add debugging options to pmtu.sh") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-04-11selftests: Add debugging options to pmtu.shDavid Ahern
pmtu.sh script runs a number of tests and dumps a summary of pass/fail. If a test fails, it is near impossible to debug why. For example: TEST: ipv6: PMTU exceptions [FAIL] There are a lot of commands run behind the scenes for this test. Which one is failing? Add a VERBOSE option to show commands that are run and any output from those commands. Add a PAUSE_ON_FAIL option to halt the script if a test fails allowing users to poke around with the setup in the failed state. In the process, rename tracing to TRACING and move declaration to top with the new variables. Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-27selftests: pmtu: add explicit tests for PMTU exceptions cleanupPaolo Abeni
Add a couple of new tests, explicitly checking that the kernel timely releases PMTU exceptions on related device removal. This is mostly a regression test vs the issue fixed by commit f5b51fe804ec ("ipv6: route: purge exception on removal") Only 2 new test cases have been added, instead of extending all the existing ones, because the reproducer requires executing several commands and would slow down too much the tests otherwise. v2 -> v3: - more cleanup, still from Stefano v1 -> v2: - several script cleanups, as suggested by Stefano Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-27selftests: pmtu: disable DAD in all namespacesPaolo Abeni
Otherwise, the configured IPv6 address could be still "tentative" at test time, possibly causing tests failures. We can also drop some sleep along the code and decrease the timeout for most commands so that the test runtime decreases. v1 -> v2: - fix comment (Stefano) Fixes: d1f1b9cbf34c ("selftests: net: Introduce first PMTU test") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08selftests: pmtu: Introduce FoU and GUE PMTU exceptions testsStefano Brivio
Introduce eight tests, for FoU and GUE, with IPv4 and IPv6 payload, on IPv4 and IPv6 transport, that check that PMTU exceptions are created with the right value when exceeding the MTU on a link of the path. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08selftests: pmtu: Introduce tests for IPv4/IPv6 over GENEVE over IPv4/IPv6Stefano Brivio
Use a router between endpoints, implemented via namespaces, set a low MTU between router and destination endpoint, exceed it and check PMTU value in route exceptions. v2: - Introduce IPv4 tests right away, if iproute2 doesn't support the 'df' link option they will be skipped (David Ahern) Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-11-08selftests: pmtu: Introduce tests for IPv4/IPv6 over VXLAN over IPv4/IPv6Stefano Brivio
Use a router between endpoints, implemented via namespaces, set a low MTU between router and destination endpoint, exceed it and check PMTU value in route exceptions. v2: - Change all occurrences of VxLAN to VXLAN (Jiri Benc) - Introduce IPv4 tests right away, if iproute2 doesn't support the 'df' link option they will be skipped (David Ahern) Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15selftests: pmtu: Add optional traffic captures for single testsStefano Brivio
If --trace is passed as an option and tcpdump is available, capture traffic for all relevant interfaces to per-test pcap files named <test>_<interface>.pcap. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-15selftests: pmtu: Allow selection of single testsStefano Brivio
As number of tests is growing, it's quite convenient to allow single tests to be run. Display usage when the script is run with any invalid argument, keep existing semantics when no arguments are passed so that automated runs won't break. Instead of just looping on the list of requested tests, if any, check first that they exist, and go through them in a nested loop to keep the existing way to display test descriptions. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-08selftests: pmtu: add basic IPv4 and IPv6 PMTU testsSabrina Dubroca
Commit d1f1b9cbf34c ("selftests: net: Introduce first PMTU test") and follow-ups introduced some PMTU tests, but they all rely on tunneling, and, particularly, on VTI. These new tests use simple routing to exercise the generation and update of PMTU exceptions in IPv4 and IPv6. Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-08selftests: pmtu: extend MTU parsing helper to locked MTUSabrina Dubroca
The mtu_parse helper introduced in commit f2c929feeccd ("selftests: pmtu: Factor out MTU parsing helper") can only handle "mtu 1234", but not "mtu lock 1234". Extend it, so that we can do IPv4 tests with PMTU smaller than net.ipv4.route.min_pmtu Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-10-08selftests: pmtu: Introduce check_pmtu_value()Stefano Brivio
Introduce and use a function that checks PMTU values against expected values and logs error messages, to remove some clutter. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-09-18selftests: pmtu: properly redirect stderr to /dev/nullSabrina Dubroca
The cleanup function uses "$CMD 2 > /dev/null", which doesn't actually send stderr to /dev/null, so when the netns doesn't exist, the error message is shown. Use "2> /dev/null" instead, so that those messages disappear, as was intended. Fixes: d1f1b9cbf34c ("selftests: net: Introduce first PMTU test") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31selftests: pmtu: detect correct binary to ping ipv6 addressesSabrina Dubroca
Some systems don't have the ping6 binary anymore, and use ping for everything. Detect the absence of ping6 and try to use ping instead. Fixes: d1f1b9cbf34c ("selftests: net: Introduce first PMTU test") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-08-31selftests: pmtu: maximum MTU for vti4 is 2^16-1-20Sabrina Dubroca
Since commit 82612de1c98e ("ip_tunnel: restore binding to ifaces with a large mtu"), the maximum MTU for vti4 is based on IP_MAX_MTU instead of the mysterious constant 0xFFF8. This makes this selftest fail. Fixes: 82612de1c98e ("ip_tunnel: restore binding to ifaces with a large mtu") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Stefano Brivio <sbrivio@redhat.com> Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...
2018-05-30selftests: net: return Kselftest Skip code for skipped testsShuah Khan (Samsung OSG)
When net test is skipped because of unmet dependencies and/or unsupported configuration, it returns 0 which is treated as a pass by the Kselftest framework. This leads to false positive result even when the test could not be run. Change it to return kselftest skip code when a test gets skipped to clearly report that the test could not be run. Kselftest framework SKIP code is 4 and the framework prints appropriate messages to indicate that the test is skipped. Change psock_tpacket to use ksft_exit_skip() when a non-root user runs the test and add an explicit check for root and a clear message, instead of failing the test when /sys/power/state file open fails. Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-04-27selftests: pmtu: Minimum MTU for vti6 is 68Stefano Brivio
A vti6 interface can carry IPv4 packets too. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-18selftests: pmtu: Drop prints to kernel log from pmtu_vti6_link_change_mtuStefano Brivio
Reported-by: David Ahern <dsahern@gmail.com> Fixes: 1fad59ea1c34 ("selftests: pmtu: Add pmtu_vti6_link_change_mtu test") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17selftests: pmtu: Add pmtu_vti6_link_change_mtu testStefano Brivio
This test checks that MTU configured from userspace is used on link creation and changes, and that when it's not passed from userspace, it's calculated properly from the MTU of the lower layer. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17selftests: pmtu: Add pmtu_vti6_link_add_mtu testStefano Brivio
Same as pmtu_vti4_link_add_mtu test, but for IPv6. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-17selftests: pmtu: Add pmtu_vti4_link_add_mtu testStefano Brivio
This test checks that MTU given on vti link creation is actually configured, and that tunnel is not created with an invalid MTU value. Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-04-17 23:50:59 +0000