summaryrefslogtreecommitdiff
path: root/tools/testing/selftests/net
AgeCommit message (Collapse)Author
2018-06-28selftests: rtnetlink: add ipsec offload API testShannon Nelson
Using the netdevsim as a device for testing, try out the XFRM commands for setting up IPsec hardware offloads. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-28selftests: rtnetlink: use dummydev as a test deviceShannon Nelson
We really shouldn't mess with local system settings, so let's use the already created dummy device instead for ipsec testing. Oh, and let's put the temp file into a proper directory. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-28selftests: rtnetlink: clear the return code at start of ipsec testShannon Nelson
Following the custom from the other functions, clear the global ret code before starting the test so as to not have previously failed tests cause us to thing this test has failed. Reported-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-27selftests: forwarding: README: Require diagramsPetr Machata
ASCII art diagrams are well suited for presenting the topology that a test uses while being easy to embed directly in the test file iteslf. They make the information very easy to grasp even for simple topologies, and for more complex ones they are almost essential, as figuring out the interconnects from the script itself proves to be difficult. Therefore state the requirement for topology ASCII art in README. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-27selftests: forwarding: Test multipath tunnelingPetr Machata
Add a GRE-tunneling test such that there are two tunnels involved, with a multipath route listing both as next hops. Similarly to router_multipath.sh, test that the distribution of traffic to the tunnels honors the configured weights. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-27selftests: forwarding: lib: Extract interface-init functionsPetr Machata
The function simple_if_init() does two things: it creates a VRF, then moves an interface into this VRF and configures addresses. The latter comes in handy when adding more interfaces into a VRF later on. The situation is similar for simple_if_fini(). Therefore split the interface remastering and address de/initialization logic to a new pair of helpers __simple_if_init() / __simple_if_fini(), and defer to these helpers from simple_if_init() and simple_if_fini(). Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-27selftests: forwarding: tc_rule_stats_get: Parameterize directionPetr Machata
The GRE multipath tests need stats on an egress counter. Change tc_rule_stats_get() to take direction as an optional argument, with default of ingress. Take the opportunity to change line continuation character from | to \. Move the | to the next line, which indent. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-27selftests: forwarding: multipath_eval(): Improve stylePetr Machata
- Change the indentation of the function body from 7 spaces to one tab. - Move initialization of weights_ratio up so that it can be referenced from the error message about packet difference being zero. - Move |'s consistently to continuation line, which reindent. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-27selftests: forwarding: Move multipath_eval() to lib.shPetr Machata
This function will be useful for the GRE multipath test that is coming later. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26selftests: forwarding: mirror_gre_vlan_bridge_1q: Unset rp_filterPetr Machata
The IP addresses of tunnel endpoint at H3 are set at the VLAN device $h3.555. Therefore when test_gretap_untagged_egress() sets vlan 555 to egress untagged at $swp3, $h3's rp_filter rejects these packets. The test then spuriously fails. Therefore turn off net.ipv4.conf.{all, $h3}.rp_filter. Fixes: 9c7c8a82442c ("selftests: forwarding: mirror_gre_vlan_bridge_1q: Add more tests") Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26selftests: net: Test headroom handling of ip6_gre devicesPetr Machata
Commit 5691484df961 ("net: ip6_gre: Fix headroom request in ip6erspan_tunnel_xmit()") and commit 01b8d064d58b ("net: ip6_gre: Request headroom in __gre6_xmit()") fix problems in reserving headroom in the packets tunneled through ip6gre/tap and ip6erspan netdevices. These two patches included snippets that reproduced the issues. This patch elevates the snippets to a full-fledged test case. Suggested-by: David Miller <davem@davemloft.net> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-26selftests: forwarding: Test routed bridge interfacePetr Machata
Add test for cases where bridge itself acts as a router interface, with front panel port attached to the bridge in question. In the first test (router_bridge.sh), VLAN memberships are not configured in any way, and everything uses default PVID of 1. Thus traffic in $h1 and $h2 is untagged. This test ensures that the previous patches didn't break a currently working scenario. In the second test (router_bridge_vlan.sh), a VLAN 555 pvid untagged is added to the bridge CPU port, with that VLAN leaving the bridge tagged through its sole member port. The traffic is therefore expected to come out tagged at $h1. This tests the fix introduced in the previous patches. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-22selftests: rtnetlink: use a local IP address for IPsec testsShannon Nelson
Find an IP address on this machine to use as a source IP, and make up a destination IP address based on the source IP. No actual messages will be sent, just a couple of IPsec rules are created and deleted. Fixes: 5e596ee171ba ("selftests: add xfrm state-policy-monitor to rtnetlink.sh") Reported-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-22selftests: rtnetlink: hide complaint from terminated monitorShannon Nelson
Set up the "ip xfrm monitor" subprogram so as to not see a "Terminated" message when the subprogram is killed. Fixes: 5e596ee171ba ("selftests: add xfrm state-policy-monitor to rtnetlink.sh") Reported-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-21selftests: net: add tcp_inq to gitignoreAnders Roxell
sha: 702353b538f5 ("selftest: add test for TCP_INQ") forgot to add tcp_inq to .gitignore. Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-21selftests: net: add config fragmentsAnders Roxell
Add fragments to pass bridge and vlan tests. Fixes: 33b01b7b4f19 ("selftests: add rtnetlink test script") Signed-off-by: Anders Roxell <anders.roxell@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds
Pull networking updates from David Miller: 1) Add Maglev hashing scheduler to IPVS, from Inju Song. 2) Lots of new TC subsystem tests from Roman Mashak. 3) Add TCP zero copy receive and fix delayed acks and autotuning with SO_RCVLOWAT, from Eric Dumazet. 4) Add XDP_REDIRECT support to mlx5 driver, from Jesper Dangaard Brouer. 5) Add ttl inherit support to vxlan, from Hangbin Liu. 6) Properly separate ipv6 routes into their logically independant components. fib6_info for the routing table, and fib6_nh for sets of nexthops, which thus can be shared. From David Ahern. 7) Add bpf_xdp_adjust_tail helper, which can be used to generate ICMP messages from XDP programs. From Nikita V. Shirokov. 8) Lots of long overdue cleanups to the r8169 driver, from Heiner Kallweit. 9) Add BTF ("BPF Type Format"), from Martin KaFai Lau. 10) Add traffic condition monitoring to iwlwifi, from Luca Coelho. 11) Plumb extack down into fib_rules, from Roopa Prabhu. 12) Add Flower classifier offload support to igb, from Vinicius Costa Gomes. 13) Add UDP GSO support, from Willem de Bruijn. 14) Add documentation for eBPF helpers, from Quentin Monnet. 15) Add TLS tx offload to mlx5, from Ilya Lesokhin. 16) Allow applications to be given the number of bytes available to read on a socket via a control message returned from recvmsg(), from Soheil Hassas Yeganeh. 17) Add x86_32 eBPF JIT compiler, from Wang YanQing. 18) Add AF_XDP sockets, with zerocopy support infrastructure as well. From Björn Töpel. 19) Remove indirect load support from all of the BPF JITs and handle these operations in the verifier by translating them into native BPF instead. From Daniel Borkmann. 20) Add GRO support to ipv6 gre tunnels, from Eran Ben Elisha. 21) Allow XDP programs to do lookups in the main kernel routing tables for forwarding. From David Ahern. 22) Allow drivers to store hardware state into an ELF section of kernel dump vmcore files, and use it in cxgb4. From Rahul Lakkireddy. 23) Various RACK and loss detection improvements in TCP, from Yuchung Cheng. 24) Add TCP SACK compression, from Eric Dumazet. 25) Add User Mode Helper support and basic bpfilter infrastructure, from Alexei Starovoitov. 26) Support ports and protocol values in RTM_GETROUTE, from Roopa Prabhu. 27) Support bulking in ->ndo_xdp_xmit() API, from Jesper Dangaard Brouer. 28) Add lots of forwarding selftests, from Petr Machata. 29) Add generic network device failover driver, from Sridhar Samudrala. * ra.kernel.org:/pub/scm/linux/kernel/git/davem/net-next: (1959 commits) strparser: Add __strp_unpause and use it in ktls. rxrpc: Fix terminal retransmission connection ID to include the channel net: hns3: Optimize PF CMDQ interrupt switching process net: hns3: Fix for VF mailbox receiving unknown message net: hns3: Fix for VF mailbox cannot receiving PF response bnx2x: use the right constant Revert "net: sched: cls: Fix offloading when ingress dev is vxlan" net: dsa: b53: Fix for brcm tag issue in Cygnus SoC enic: fix UDP rss bits netdev-FAQ: clarify DaveM's position for stable backports rtnetlink: validate attributes in do_setlink() mlxsw: Add extack messages for port_{un, }split failures netdevsim: Add extack error message for devlink reload devlink: Add extack to reload and port_{un, }split operations net: metrics: add proper netlink validation ipmr: fix error path when ipmr_new_table fails ip6mr: only set ip6mr_table from setsockopt when ip6mr_new_table succeeds net: hns3: remove unused hclgevf_cfg_func_mta_filter netfilter: provide udp*_lib_lookup for nf_tproxy qed*: Utilize FW 8.37.2.0 ...
2018-06-04selftests: forwarding: mirror_vlan: Change test descriptionPetr Machata
The test description is displayed with the PASS/FAIL resolution after the test is ran. There however already is one other test described exactly like this, which makes it unclear which of the tests passed or failed. Make the description unique. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04selftests: forwarding: mirror_vlan: Uninstall trapPetr Machata
Instead of installing a trap before tests run and uninstalling it after they run, mirror_vlan.sh installs it twice due to a typo. Fix the typo. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04selftests/net: add packet socket packet_snd testWillem de Bruijn
Add regression tests for PF_PACKET transmission using packet_snd. The TPACKET ring interface has tests for transmission and reception. This is an initial stab at the same for the send call based interface. Packets are sent over loopback, then read twice. The entire packet is read from another packet socket and compared. The packet is also verified to arrive at a UDP socket for protocol conformance. The test sends a packet over loopback, testing the following options (not the full cross-product): - SOCK_DGRAM - SOCK_RAW - vlan tag - qdisc bypass - bind() and sendto() - virtio_net_hdr - csum offload (NOT actual csum feature, ignored on loopback) - gso Besides these basic functionality tests, the test runs from a set of bounds checks, positive and negative. Running over loopback, which has dev->min_header_len, it cannot generate variable length hhlen. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04selftests/net: udpgso: test small gso_size boundary conditionsWillem de Bruijn
Verify that udpgso can generate segments smaller than device mtu, down to the extreme case of 1B gso_size. Verify that irrespective of gso_size, udpgso restricts the number of segments it will generate per call (UDP_MAX_SEGMENTS). Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04selftests/net: enable msg_zerocopy testWillem de Bruijn
The existing msg_zerocopy test takes additional protocol arguments. Add a variant that takes no arguments and runs all supported variants. Call this from kselftest. Signed-off-by: Willem de Bruijn <willemb@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01selftests: forwarding: mirror_gre_bridge_1d_vlan: Add STP testPetr Machata
To test offloading of mirror-to-gretap in mlxsw for cases that a VLAN-unaware bridge is in underlay packet path, test that the STP status of bridge egress port is reflected. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01selftests: forwarding: mirror_gre_vlan_bridge_1q: Add more testsPetr Machata
Offloading of mirror-to-gretap in mlxsw is tricky especially in cases when the gretap underlay involves bridges. Add more tests that exercise the bridge handling code: - forbidden_egress tests that check vlan removal on bridge port in the underlay packet path - untagged_egress tests that similarly check "egress untagged" - fdb_roaming tests that check whether learning FDB on a different port is reflected - stp tests for handling port STP status of bridge egress port Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01selftests: forwarding: mirror_gre_vlan_bridge_1q: Rename two testsPetr Machata
Rename test_gretap_forbidden() and test_ip6gretap_forbidden() to a more specific test_gretap_forbidden_cpu() and test_ip6gretap_forbidden_cpu(). This will make it clearer which is which when further down a patch is introduced that forbids a VLAN on regular bridge port. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01selftests: forwarding: mirror_gre_vlan_bridge_1q: Test final configPetr Machata
After the final change reestablishes the original configuration, make sure the traffic flows again as it should. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01selftests: forwarding: mirror_gre_vlan_bridge_1q: Fix tunnel namePetr Machata
The "ip6gretap" in the test name refers to the tunnel device type that the test is supposed to be testing. However test_ip6gretap_forbidden() tests, due to a typo, a gretap tunnel. Fix the typo. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01selftests: forwarding: mirror_gre_lib: Add STP testPetr Machata
Add a reusable full test that toggles STP state of a given bridge port and checks that the mirroring reacts appropriately. The test will be used by bridge tests in follow-up patches. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01selftests: forwarding: mirror_lib: skip_hw the VLAN capturePetr Machata
When the VLAN capture is installed on a front panel device and not a soft device, the packets are counted twice: once in fast path, and once after they are trapped to the kernel. Resolve the problem by passing skip_hw flag to vlan_capture_install(). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01selftests: forwarding: mirror_lib: Move here do_test_span_vlan_dir_ips()Petr Machata
Move the function do_test_span_vlan_dir_ips() from mirror_vlan.sh test to a library file mirror_lib.sh to allow reuse. Fill in other entry points similar to other testing functions in mirror_lib.sh, they will be useful in following patches. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-01selftests: forwarding: lib: Move here vlan_capture_{, un}install()Petr Machata
Move vlan_capture_install() and vlan_capture_uninstall() from mirror_vlan.sh test to lib.sh so that it can be reused in other tests. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-30selftests: net: return Kselftest Skip code for skipped testsShuah Khan (Samsung OSG)
When net test is skipped because of unmet dependencies and/or unsupported configuration, it returns 0 which is treated as a pass by the Kselftest framework. This leads to false positive result even when the test could not be run. Change it to return kselftest skip code when a test gets skipped to clearly report that the test could not be run. Kselftest framework SKIP code is 4 and the framework prints appropriate messages to indicate that the test is skipped. Change psock_tpacket to use ksft_exit_skip() when a non-root user runs the test and add an explicit check for root and a clear message, instead of failing the test when /sys/power/state file open fails. Signed-off-by: Shuah Khan (Samsung OSG) <shuah@kernel.org>
2018-05-29selftests: fib_tests: Add prefix route tests with metricDavid Ahern
Add tests verifying prefix routes are inserted with expected metric. IPv6 prefix route tests TEST: Default metric [ OK ] TEST: User specified metric on first device [ OK ] TEST: User specified metric on second device [ OK ] TEST: Delete of address on first device [ OK ] TEST: Modify metric of address [ OK ] TEST: Prefix route removed on link down [ OK ] TEST: Prefix route with metric on link up [ OK ] IPv4 prefix route tests TEST: Default metric [ OK ] TEST: User specified metric on first device [ OK ] TEST: User specified metric on second device [ OK ] TEST: Delete of address on first device [ OK ] TEST: Modify metric of address [ OK ] TEST: Prefix route removed on link down [ OK ] TEST: Prefix route with metric on link up [ OK ] Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
Lots of easy overlapping changes in the confict resolutions here. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller
Daniel Borkmann says: ==================== pull-request: bpf 2018-05-24 The following pull-request contains BPF updates for your *net* tree. The main changes are: 1) Fix a bug in the original fix to prevent out of bounds speculation when multiple tail call maps from different branches or calls end up at the same tail call helper invocation, from Daniel. 2) Two selftest fixes, one in reuseport_bpf_numa where test is skipped in case of missing numa support and another one to update kernel config to properly support xdp_meta.sh test, from Anders. ... Would be great if you have a chance to merge net into net-next after that. The verifier fix would be needed later as a dependency in bpf-next for upcomig work there. When you do the merge there's a trivial conflict on BPF side with 849fa50662fb ("bpf/verifier: refine retval R0 state for bpf_get_stack helper"): Resolution is to keep both functions, the do_refine_retval_range() and record_func_map(). ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-25selftests/net: Add missing config options for PMTU testsStefano Brivio
PMTU tests in pmtu.sh need support for VTI, VTI6 and dummy interfaces: add them to config file. Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Fixes: d1f1b9cbf34c ("selftests: net: Introduce first PMTU test") Signed-off-by: Stefano Brivio <sbrivio@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24selftests: forwarding: Test mirror-to-gre w/ UL 802.1d+VLANPetr Machata
Test for "tc action mirred egress mirror" that mirrors to GRE when the underlay route points at an 802.1d bridge and packet egresses through a VLAN device. Besides testing basic connectivity, this also tests that the traffic is properly tagged. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24selftests: forwarding: Test mirror-to-gre w/ UL VLANPetr Machata
Test for "tc action mirred egress mirror" that mirrors to a gretap netdevice whose underlay route points at a vlan device. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24selftests: forwarding: Test mirror-to-gre w/ UL VLAN+802.1qPetr Machata
Test for "tc action mirred egress mirror" that mirrors to GRE when the underlay route points at a vlan device on top of a bridge device with vlan filtering (802.1q). Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24selftests: forwarding: Test mirror-to-vlanPetr Machata
Test for "tc action mirred egress mirror" that mirrors to a vlan device. - test_vlan() tests that the packets get mirrored - test_tagged_vlan() tests that the mirrored packets have correct inner VLAN tag. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24selftests: forwarding: lib: Extract trap_{, un}install()Petr Machata
A mirror-to-vlan test that's coming next needs to install the trap unconditionally. Therefore extract from slow_path_trap_{,un}install() a more generic functions trap_install() and trap_uninstall(), and covert the former two to conditional wrappers around these. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24selftests: forwarding: mirror_gre_lib: Support VLANPetr Machata
Add full_test_span_gre_dir_vlan_ips() and full_test_span_gre_dir_vlan() to support mirror-to-gre tests that involve VLAN. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24selftests: forwarding: lib: Support VLAN devicesPetr Machata
Add vlan_create() and vlan_destroy() to manage VLAN netdevices. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24selftests: forwarding: Add $h3's clsact to mirror_topo_lib.shPetr Machata
Having a clsact qdisc on $h3 is useful in several tests, and will be useful in more tests to come. Move the registration from all the tests that need it into the topology file itself. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24selftests: forwarding: mirror_gre_lib: Extract generic functionsPetr Machata
For non-GRE mirroring tests, a functions along the lines of do_test_span_gre_dir_ips() and test_span_gre_dir_ips() are necessary, but such that they don't assume tunnels are involved. Extract the code from mirror_gre_lib.sh to mirror_lib.sh and convert to just use a given device without assuming it's named "h3-$tundev". Convert the two above-mentioned functions to wrappers that pass along the correct device name. Add test_span_dir() and fail_test_span_dir() to round up the API for use by following patches. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24selftests: forwarding: Split mirror_gre_topo_lib.shPetr Machata
Move generic parts of mirror_gre_topo_lib.sh into a new file mirror_topo_lib.sh. Reuse the functions in GRE topo, adding the tunnel devices as necessary. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24selftests: forwarding: Test removal of mirroringPetr Machata
Test that when flower-based mirror action is removed, mirroring stops. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24selftests: forwarding: Test removal of underlay routePetr Machata
When underlay route is removed, the mirrored traffic should not be forwarded. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-24selftests: forwarding: Test mirroring to deleted devicePetr Machata
Tests that the mirroring code catches up with deletion of a mirrored-to device. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-23selftests: net: initial fib rule testsRoopa Prabhu
This adds a first set of tests for fib rule match/action for ipv4 and ipv6. Initial tests only cover action lookup table. can be extended to cover other actions in the future. Uses ip route get to validate the rule lookup. Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit (git 2.34.1) at 2025-09-30 04:53:38 +0000